From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/wan/lmc/Makefile | 17 + drivers/net/wan/lmc/lmc.h | 33 + drivers/net/wan/lmc/lmc_debug.c | 85 ++ drivers/net/wan/lmc/lmc_debug.h | 52 + drivers/net/wan/lmc/lmc_ioctl.h | 257 +++++ drivers/net/wan/lmc/lmc_main.c | 2201 +++++++++++++++++++++++++++++++++++++++ drivers/net/wan/lmc/lmc_media.c | 1246 ++++++++++++++++++++++ drivers/net/wan/lmc/lmc_media.h | 65 ++ drivers/net/wan/lmc/lmc_prot.h | 15 + drivers/net/wan/lmc/lmc_proto.c | 249 +++++ drivers/net/wan/lmc/lmc_proto.h | 16 + drivers/net/wan/lmc/lmc_var.h | 570 ++++++++++ 12 files changed, 4806 insertions(+) create mode 100644 drivers/net/wan/lmc/Makefile create mode 100644 drivers/net/wan/lmc/lmc.h create mode 100644 drivers/net/wan/lmc/lmc_debug.c create mode 100644 drivers/net/wan/lmc/lmc_debug.h create mode 100644 drivers/net/wan/lmc/lmc_ioctl.h create mode 100644 drivers/net/wan/lmc/lmc_main.c create mode 100644 drivers/net/wan/lmc/lmc_media.c create mode 100644 drivers/net/wan/lmc/lmc_media.h create mode 100644 drivers/net/wan/lmc/lmc_prot.h create mode 100644 drivers/net/wan/lmc/lmc_proto.c create mode 100644 drivers/net/wan/lmc/lmc_proto.h create mode 100644 drivers/net/wan/lmc/lmc_var.h (limited to 'drivers/net/wan/lmc') diff --git a/drivers/net/wan/lmc/Makefile b/drivers/net/wan/lmc/Makefile new file mode 100644 index 00000000000..dabdcfed4ef --- /dev/null +++ b/drivers/net/wan/lmc/Makefile @@ -0,0 +1,17 @@ +# +# Makefile for the Lan Media 21140 based WAN cards +# Specifically the 1000,1200,5200,5245 +# + +obj-$(CONFIG_LANMEDIA) += lmc.o + +lmc-objs := lmc_debug.o lmc_media.o lmc_main.o lmc_proto.o + +# Like above except every packet gets echoed to KERN_DEBUG +# in hex +# +# DBDEF = \ +# -DDEBUG \ +# -DLMC_PACKET_LOG + +EXTRA_CFLAGS += -I. $(DBGDEF) diff --git a/drivers/net/wan/lmc/lmc.h b/drivers/net/wan/lmc/lmc.h new file mode 100644 index 00000000000..882e58c1bfd --- /dev/null +++ b/drivers/net/wan/lmc/lmc.h @@ -0,0 +1,33 @@ +#ifndef _LMC_H_ +#define _LMC_H_ + +#include "lmc_var.h" + +/* + * prototypes for everyone + */ +int lmc_probe(struct net_device * dev); +unsigned lmc_mii_readreg(lmc_softc_t * const sc, unsigned + devaddr, unsigned regno); +void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr, + unsigned regno, unsigned data); +void lmc_led_on(lmc_softc_t * const, u_int32_t); +void lmc_led_off(lmc_softc_t * const, u_int32_t); +unsigned lmc_mii_readreg(lmc_softc_t * const, unsigned, unsigned); +void lmc_mii_writereg(lmc_softc_t * const, unsigned, unsigned, unsigned); +void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits); +void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits); + +int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); + +extern lmc_media_t lmc_ds3_media; +extern lmc_media_t lmc_ssi_media; +extern lmc_media_t lmc_t1_media; +extern lmc_media_t lmc_hssi_media; + +#ifdef _DBG_EVENTLOG +static void lmcEventLog( u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3 ); +#endif + +#endif + diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c new file mode 100644 index 00000000000..9dccd9546a1 --- /dev/null +++ b/drivers/net/wan/lmc/lmc_debug.c @@ -0,0 +1,85 @@ + +#include +#include +#include + +#include "lmc_debug.h" + +/* + * Prints out len, max to 80 octets using printk, 20 per line + */ +void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) +{ +#ifdef DEBUG +#ifdef LMC_PACKET_LOG + int iNewLine = 1; + char str[80], *pstr; + + sprintf(str, KERN_DEBUG "lmc: %s: ", type); + pstr = str+strlen(str); + + if(iLen > 240){ + printk(KERN_DEBUG "lmc: Printing 240 chars... out of: %d\n", iLen); + iLen = 240; + } + else{ + printk(KERN_DEBUG "lmc: Printing %d chars\n", iLen); + } + + while(iLen > 0) + { + sprintf(pstr, "%02x ", *ucData); + pstr+=3; + ucData++; + if( !(iNewLine % 20)) + { + sprintf(pstr, "\n"); + printk(str); + sprintf(str, KERN_DEBUG "lmc: %s: ", type); + pstr=str+strlen(str); + } + iNewLine++; + iLen--; + } + sprintf(pstr, "\n"); + printk(str); +#endif +#endif +} + +#ifdef DEBUG +u_int32_t lmcEventLogIndex = 0; +u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; +#endif + +void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3) +{ +#ifdef DEBUG + lmcEventLogBuf[lmcEventLogIndex++] = EventNum; + lmcEventLogBuf[lmcEventLogIndex++] = arg2; + lmcEventLogBuf[lmcEventLogIndex++] = arg3; + lmcEventLogBuf[lmcEventLogIndex++] = jiffies; + + lmcEventLogIndex &= (LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS) - 1; +#endif +} + +void lmc_trace(struct net_device *dev, char *msg){ +#ifdef LMC_TRACE + unsigned long j = jiffies + 3; /* Wait for 50 ms */ + + if(in_interrupt()){ + printk("%s: * %s\n", dev->name, msg); +// while(time_before(jiffies, j+10)) +// ; + } + else { + printk("%s: %s\n", dev->name, msg); + while(time_before(jiffies, j)) + schedule(); + } +#endif +} + + +/* --------------------------- end if_lmc_linux.c ------------------------ */ diff --git a/drivers/net/wan/lmc/lmc_debug.h b/drivers/net/wan/lmc/lmc_debug.h new file mode 100644 index 00000000000..cf3563859bf --- /dev/null +++ b/drivers/net/wan/lmc/lmc_debug.h @@ -0,0 +1,52 @@ +#ifndef _LMC_DEBUG_H_ +#define _LMC_DEBUG_H_ + +#ifdef DEBUG +#ifdef LMC_PACKET_LOG +#define LMC_CONSOLE_LOG(x,y,z) lmcConsoleLog((x), (y), (z)) +#else +#define LMC_CONSOLE_LOG(x,y,z) +#endif +#else +#define LMC_CONSOLE_LOG(x,y,z) +#endif + + + +/* Debug --- Event log definitions --- */ +/* EVENTLOGSIZE*EVENTLOGARGS needs to be a power of 2 */ +#define LMC_EVENTLOGSIZE 1024 /* number of events in eventlog */ +#define LMC_EVENTLOGARGS 4 /* number of args for each event */ + +/* event indicators */ +#define LMC_EVENT_XMT 1 +#define LMC_EVENT_XMTEND 2 +#define LMC_EVENT_XMTINT 3 +#define LMC_EVENT_RCVINT 4 +#define LMC_EVENT_RCVEND 5 +#define LMC_EVENT_INT 6 +#define LMC_EVENT_XMTINTTMO 7 +#define LMC_EVENT_XMTPRCTMO 8 +#define LMC_EVENT_INTEND 9 +#define LMC_EVENT_RESET1 10 +#define LMC_EVENT_RESET2 11 +#define LMC_EVENT_FORCEDRESET 12 +#define LMC_EVENT_WATCHDOG 13 +#define LMC_EVENT_BADPKTSURGE 14 +#define LMC_EVENT_TBUSY0 15 +#define LMC_EVENT_TBUSY1 16 + + +#ifdef DEBUG +extern u_int32_t lmcEventLogIndex; +extern u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; +#define LMC_EVENT_LOG(x, y, z) lmcEventLog((x), (y), (z)) +#else +#define LMC_EVENT_LOG(x,y,z) +#endif /* end ifdef _DBG_EVENTLOG */ + +void lmcConsoleLog(char *type, unsigned char *ucData, int iLen); +void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3); +void lmc_trace(struct net_device *dev, char *msg); + +#endif diff --git a/drivers/net/wan/lmc/lmc_ioctl.h b/drivers/net/wan/lmc/lmc_ioctl.h new file mode 100644 index 00000000000..57dd861cd3d --- /dev/null +++ b/drivers/net/wan/lmc/lmc_ioctl.h @@ -0,0 +1,257 @@ +#ifndef _LMC_IOCTL_H_ +#define _LMC_IOCTL_H_ +/* $Id: lmc_ioctl.h,v 1.15 2000/04/06 12:16:43 asj Exp $ */ + + /* + * Copyright (c) 1997-2000 LAN Media Corporation (LMC) + * All rights reserved. www.lanmedia.com + * + * This code is written by: + * Andrew Stanley-Jones (asj@cban.com) + * Rob Braun (bbraun@vix.com), + * Michael Graff (explorer@vix.com) and + * Matt Thomas (matt@3am-software.com). + * + * This software may be used and distributed according to the terms + * of the GNU General Public License version 2, incorporated herein by reference. + */ + +#define LMCIOCGINFO SIOCDEVPRIVATE+3 /* get current state */ +#define LMCIOCSINFO SIOCDEVPRIVATE+4 /* set state to user values */ +#define LMCIOCGETLMCSTATS SIOCDEVPRIVATE+5 +#define LMCIOCCLEARLMCSTATS SIOCDEVPRIVATE+6 +#define LMCIOCDUMPEVENTLOG SIOCDEVPRIVATE+7 +#define LMCIOCGETXINFO SIOCDEVPRIVATE+8 +#define LMCIOCSETCIRCUIT SIOCDEVPRIVATE+9 +#define LMCIOCUNUSEDATM SIOCDEVPRIVATE+10 +#define LMCIOCRESET SIOCDEVPRIVATE+11 +#define LMCIOCT1CONTROL SIOCDEVPRIVATE+12 +#define LMCIOCIFTYPE SIOCDEVPRIVATE+13 +#define LMCIOCXILINX SIOCDEVPRIVATE+14 + +#define LMC_CARDTYPE_UNKNOWN -1 +#define LMC_CARDTYPE_HSSI 1 /* probed card is a HSSI card */ +#define LMC_CARDTYPE_DS3 2 /* probed card is a DS3 card */ +#define LMC_CARDTYPE_SSI 3 /* probed card is a SSI card */ +#define LMC_CARDTYPE_T1 4 /* probed card is a T1 card */ + +#define LMC_CTL_CARDTYPE_LMC5200 0 /* HSSI */ +#define LMC_CTL_CARDTYPE_LMC5245 1 /* DS3 */ +#define LMC_CTL_CARDTYPE_LMC1000 2 /* SSI, V.35 */ +#define LMC_CTL_CARDTYPE_LMC1200 3 /* DS1 */ + +#define LMC_CTL_OFF 0 /* generic OFF value */ +#define LMC_CTL_ON 1 /* generic ON value */ + +#define LMC_CTL_CLOCK_SOURCE_EXT 0 /* clock off line */ +#define LMC_CTL_CLOCK_SOURCE_INT 1 /* internal clock */ + +#define LMC_CTL_CRC_LENGTH_16 16 +#define LMC_CTL_CRC_LENGTH_32 32 +#define LMC_CTL_CRC_BYTESIZE_2 2 +#define LMC_CTL_CRC_BYTESIZE_4 4 + + +#define LMC_CTL_CABLE_LENGTH_LT_100FT 0 /* DS3 cable < 100 feet */ +#define LMC_CTL_CABLE_LENGTH_GT_100FT 1 /* DS3 cable >= 100 feet */ + +#define LMC_CTL_CIRCUIT_TYPE_E1 0 +#define LMC_CTL_CIRCUIT_TYPE_T1 1 + +/* + * IFTYPE defines + */ +#define LMC_PPP 1 /* use sppp interface */ +#define LMC_NET 2 /* use direct net interface */ +#define LMC_RAW 3 /* use direct net interface */ + +/* + * These are not in the least IOCTL related, but I want them common. + */ +/* + * assignments for the GPIO register on the DEC chip (common) + */ +#define LMC_GEP_INIT 0x01 /* 0: */ +#define LMC_GEP_RESET 0x02 /* 1: */ +#define LMC_GEP_MODE 0x10 /* 4: */ +#define LMC_GEP_DP 0x20 /* 5: */ +#define LMC_GEP_DATA 0x40 /* 6: serial out */ +#define LMC_GEP_CLK 0x80 /* 7: serial clock */ + +/* + * HSSI GPIO assignments + */ +#define LMC_GEP_HSSI_ST 0x04 /* 2: receive timing sense (deprecated) */ +#define LMC_GEP_HSSI_CLOCK 0x08 /* 3: clock source */ + +/* + * T1 GPIO assignments + */ +#define LMC_GEP_SSI_GENERATOR 0x04 /* 2: enable prog freq gen serial i/f */ +#define LMC_GEP_SSI_TXCLOCK 0x08 /* 3: provide clock on TXCLOCK output */ + +/* + * Common MII16 bits + */ +#define LMC_MII16_LED0 0x0080 +#define LMC_MII16_LED1 0x0100 +#define LMC_MII16_LED2 0x0200 +#define LMC_MII16_LED3 0x0400 /* Error, and the red one */ +#define LMC_MII16_LED_ALL 0x0780 /* LED bit mask */ +#define LMC_MII16_FIFO_RESET 0x0800 + +/* + * definitions for HSSI + */ +#define LMC_MII16_HSSI_TA 0x0001 +#define LMC_MII16_HSSI_CA 0x0002 +#define LMC_MII16_HSSI_LA 0x0004 +#define LMC_MII16_HSSI_LB 0x0008 +#define LMC_MII16_HSSI_LC 0x0010 +#define LMC_MII16_HSSI_TM 0x0020 +#define LMC_MII16_HSSI_CRC 0x0040 + +/* + * assignments for the MII register 16 (DS3) + */ +#define LMC_MII16_DS3_ZERO 0x0001 +#define LMC_MII16_DS3_TRLBK 0x0002 +#define LMC_MII16_DS3_LNLBK 0x0004 +#define LMC_MII16_DS3_RAIS 0x0008 +#define LMC_MII16_DS3_TAIS 0x0010 +#define LMC_MII16_DS3_BIST 0x0020 +#define LMC_MII16_DS3_DLOS 0x0040 +#define LMC_MII16_DS3_CRC 0x1000 +#define LMC_MII16_DS3_SCRAM 0x2000 +#define LMC_MII16_DS3_SCRAM_LARS 0x4000 + +/* Note: 2 pairs of LEDs where swapped by mistake + * in Xilinx code for DS3 & DS1 adapters */ +#define LMC_DS3_LED0 0x0100 /* bit 08 yellow */ +#define LMC_DS3_LED1 0x0080 /* bit 07 blue */ +#define LMC_DS3_LED2 0x0400 /* bit 10 green */ +#define LMC_DS3_LED3 0x0200 /* bit 09 red */ + +/* + * framer register 0 and 7 (7 is latched and reset on read) + */ +#define LMC_FRAMER_REG0_DLOS 0x80 /* digital loss of service */ +#define LMC_FRAMER_REG0_OOFS 0x40 /* out of frame sync */ +#define LMC_FRAMER_REG0_AIS 0x20 /* alarm indication signal */ +#define LMC_FRAMER_REG0_CIS 0x10 /* channel idle */ +#define LMC_FRAMER_REG0_LOC 0x08 /* loss of clock */ + +/* + * Framer register 9 contains the blue alarm signal + */ +#define LMC_FRAMER_REG9_RBLUE 0x02 /* Blue alarm failure */ + +/* + * Framer register 0x10 contains xbit error + */ +#define LMC_FRAMER_REG10_XBIT 0x01 /* X bit error alarm failure */ + +/* + * And SSI, LMC1000 + */ +#define LMC_MII16_SSI_DTR 0x0001 /* DTR output RW */ +#define LMC_MII16_SSI_DSR 0x0002 /* DSR input RO */ +#define LMC_MII16_SSI_RTS 0x0004 /* RTS output RW */ +#define LMC_MII16_SSI_CTS 0x0008 /* CTS input RO */ +#define LMC_MII16_SSI_DCD 0x0010 /* DCD input RO */ +#define LMC_MII16_SSI_RI 0x0020 /* RI input RO */ +#define LMC_MII16_SSI_CRC 0x1000 /* CRC select - RW */ + +/* + * bits 0x0080 through 0x0800 are generic, and described + * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET + */ +#define LMC_MII16_SSI_LL 0x1000 /* LL output RW */ +#define LMC_MII16_SSI_RL 0x2000 /* RL output RW */ +#define LMC_MII16_SSI_TM 0x4000 /* TM input RO */ +#define LMC_MII16_SSI_LOOP 0x8000 /* loopback enable RW */ + +/* + * Some of the MII16 bits are mirrored in the MII17 register as well, + * but let's keep thing separate for now, and get only the cable from + * the MII17. + */ +#define LMC_MII17_SSI_CABLE_MASK 0x0038 /* mask to extract the cable type */ +#define LMC_MII17_SSI_CABLE_SHIFT 3 /* shift to extract the cable type */ + +/* + * And T1, LMC1200 + */ +#define LMC_MII16_T1_UNUSED1 0x0003 +#define LMC_MII16_T1_XOE 0x0004 +#define LMC_MII16_T1_RST 0x0008 /* T1 chip reset - RW */ +#define LMC_MII16_T1_Z 0x0010 /* output impedance T1=1, E1=0 output - RW */ +#define LMC_MII16_T1_INTR 0x0020 /* interrupt from 8370 - RO */ +#define LMC_MII16_T1_ONESEC 0x0040 /* one second square wave - ro */ + +#define LMC_MII16_T1_LED0 0x0100 +#define LMC_MII16_T1_LED1 0x0080 +#define LMC_MII16_T1_LED2 0x0400 +#define LMC_MII16_T1_LED3 0x0200 +#define LMC_MII16_T1_FIFO_RESET 0x0800 + +#define LMC_MII16_T1_CRC 0x1000 /* CRC select - RW */ +#define LMC_MII16_T1_UNUSED2 0xe000 + + +/* 8370 framer registers */ + +#define T1FRAMER_ALARM1_STATUS 0x47 +#define T1FRAMER_ALARM2_STATUS 0x48 +#define T1FRAMER_FERR_LSB 0x50 +#define T1FRAMER_FERR_MSB 0x51 /* framing bit error counter */ +#define T1FRAMER_LCV_LSB 0x54 +#define T1FRAMER_LCV_MSB 0x55 /* line code violation counter */ +#define T1FRAMER_AERR 0x5A + +/* mask for the above AERR register */ +#define T1FRAMER_LOF_MASK (0x0f0) /* receive loss of frame */ +#define T1FRAMER_COFA_MASK (0x0c0) /* change of frame alignment */ +#define T1FRAMER_SEF_MASK (0x03) /* severely errored frame */ + +/* 8370 framer register ALM1 (0x47) values + * used to determine link status + */ + +#define T1F_SIGFRZ 0x01 /* signaling freeze */ +#define T1F_RLOF 0x02 /* receive loss of frame alignment */ +#define T1F_RLOS 0x04 /* receive loss of signal */ +#define T1F_RALOS 0x08 /* receive analog loss of signal or RCKI loss of clock */ +#define T1F_RAIS 0x10 /* receive alarm indication signal */ +#define T1F_UNUSED 0x20 +#define T1F_RYEL 0x40 /* receive yellow alarm */ +#define T1F_RMYEL 0x80 /* receive multiframe yellow alarm */ + +#define LMC_T1F_WRITE 0 +#define LMC_T1F_READ 1 + +typedef struct lmc_st1f_control { + int command; + int address; + int value; + char __user *data; +} lmc_t1f_control; + +enum lmc_xilinx_c { + lmc_xilinx_reset = 1, + lmc_xilinx_load_prom = 2, + lmc_xilinx_load = 3 +}; + +struct lmc_xilinx_control { + enum lmc_xilinx_c command; + int len; + char __user *data; +}; + +/* ------------------ end T1 defs ------------------- */ + +#define LMC_MII_LedMask 0x0780 +#define LMC_MII_LedBitPos 7 + +#endif diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c new file mode 100644 index 00000000000..15e545f66cd --- /dev/null +++ b/drivers/net/wan/lmc/lmc_main.c @@ -0,0 +1,2201 @@ + /* + * Copyright (c) 1997-2000 LAN Media Corporation (LMC) + * All rights reserved. www.lanmedia.com + * + * This code is written by: + * Andrew Stanley-Jones (asj@cban.com) + * Rob Braun (bbraun@vix.com), + * Michael Graff (explorer@vix.com) and + * Matt Thomas (matt@3am-software.com). + * + * With Help By: + * David Boggs + * Ron Crane + * Alan Cox + * + * This software may be used and distributed according to the terms + * of the GNU General Public License version 2, incorporated herein by reference. + * + * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards. + * + * To control link specific options lmcctl is required. + * It can be obtained from ftp.lanmedia.com. + * + * Linux driver notes: + * Linux uses the device struct lmc_private to pass private information + * arround. + * + * The initialization portion of this driver (the lmc_reset() and the + * lmc_dec_reset() functions, as well as the led controls and the + * lmc_initcsrs() functions. + * + * The watchdog function runs every second and checks to see if + * we still have link, and that the timing source is what we expected + * it to be. If link is lost, the interface is marked down, and + * we no longer can transmit. + * + */ + +/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include /* Processor type for cache alignment. */ +#include +#include +#include +//#include + +#define DRIVER_MAJOR_VERSION 1 +#define DRIVER_MINOR_VERSION 34 +#define DRIVER_SUB_VERSION 0 + +#define DRIVER_VERSION ((DRIVER_MAJOR_VERSION << 8) + DRIVER_MINOR_VERSION) + +#include "lmc.h" +#include "lmc_var.h" +#include "lmc_ioctl.h" +#include "lmc_debug.h" +#include "lmc_proto.h" + +static int lmc_first_load = 0; + +static int LMC_PKT_BUF_SZ = 1542; + +static struct pci_device_id lmc_pci_tbl[] = { + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST, + PCI_VENDOR_ID_LMC, PCI_ANY_ID }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST, + PCI_ANY_ID, PCI_VENDOR_ID_LMC }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, lmc_pci_tbl); +MODULE_LICENSE("GPL"); + + +static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int lmc_rx (struct net_device *dev); +static int lmc_open(struct net_device *dev); +static int lmc_close(struct net_device *dev); +static struct net_device_stats *lmc_get_stats(struct net_device *dev); +static irqreturn_t lmc_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, size_t csr_size); +static void lmc_softreset(lmc_softc_t * const); +static void lmc_running_reset(struct net_device *dev); +static int lmc_ifdown(struct net_device * const); +static void lmc_watchdog(unsigned long data); +static void lmc_reset(lmc_softc_t * const sc); +static void lmc_dec_reset(lmc_softc_t * const sc); +static void lmc_driver_timeout(struct net_device *dev); + +/* + * linux reserves 16 device specific IOCTLs. We call them + * LMCIOC* to control various bits of our world. + */ +int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ +{ + lmc_softc_t *sc; + lmc_ctl_t ctl; + int ret; + u_int16_t regVal; + unsigned long flags; + + struct sppp *sp; + + ret = -EOPNOTSUPP; + + sc = dev->priv; + + lmc_trace(dev, "lmc_ioctl in"); + + /* + * Most functions mess with the structure + * Disable interrupts while we do the polling + */ + spin_lock_irqsave(&sc->lmc_lock, flags); + + switch (cmd) { + /* + * Return current driver state. Since we keep this up + * To date internally, just copy this out to the user. + */ + case LMCIOCGINFO: /*fold01*/ + if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof (lmc_ctl_t))) + return -EFAULT; + ret = 0; + break; + + case LMCIOCSINFO: /*fold01*/ + sp = &((struct ppp_device *) dev)->sppp; + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + + if(dev->flags & IFF_UP){ + ret = -EBUSY; + break; + } + + if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t))) + return -EFAULT; + + sc->lmc_media->set_status (sc, &ctl); + + if(ctl.crc_length != sc->ictl.crc_length) { + sc->lmc_media->set_crc_length(sc, ctl.crc_length); + if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) + sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE; + else + sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE; + } + + if (ctl.keepalive_onoff == LMC_CTL_OFF) + sp->pp_flags &= ~PP_KEEPALIVE; /* Turn off */ + else + sp->pp_flags |= PP_KEEPALIVE; /* Turn on */ + + ret = 0; + break; + + case LMCIOCIFTYPE: /*fold01*/ + { + u_int16_t old_type = sc->if_type; + u_int16_t new_type; + + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } + + if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) + return -EFAULT; + + + if (new_type == old_type) + { + ret = 0 ; + break; /* no change */ + } + + lmc_proto_close(sc); + lmc_proto_detach(sc); + + sc->if_type = new_type; +// lmc_proto_init(sc); + lmc_proto_attach(sc); + lmc_proto_open(sc); + + ret = 0 ; + break ; + } + + case LMCIOCGETXINFO: /*fold01*/ + sc->lmc_xinfo.Magic0 = 0xBEEFCAFE; + + sc->lmc_xinfo.PciCardType = sc->lmc_cardtype; + sc->lmc_xinfo.PciSlotNumber = 0; + sc->lmc_xinfo.DriverMajorVersion = DRIVER_MAJOR_VERSION; + sc->lmc_xinfo.DriverMinorVersion = DRIVER_MINOR_VERSION; + sc->lmc_xinfo.DriverSubVersion = DRIVER_SUB_VERSION; + sc->lmc_xinfo.XilinxRevisionNumber = + lmc_mii_readreg (sc, 0, 3) & 0xf; + sc->lmc_xinfo.MaxFrameSize = LMC_PKT_BUF_SZ; + sc->lmc_xinfo.link_status = sc->lmc_media->get_link_status (sc); + sc->lmc_xinfo.mii_reg16 = lmc_mii_readreg (sc, 0, 16); + + sc->lmc_xinfo.Magic1 = 0xDEADBEEF; + + if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo, + sizeof (struct lmc_xinfo))) + return -EFAULT; + ret = 0; + + break; + + case LMCIOCGETLMCSTATS: /*fold01*/ + if (sc->lmc_cardtype == LMC_CARDTYPE_T1){ + lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB); + sc->stats.framingBitErrorCount += + lmc_mii_readreg (sc, 0, 18) & 0xff; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB); + sc->stats.framingBitErrorCount += + (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB); + sc->stats.lineCodeViolationCount += + lmc_mii_readreg (sc, 0, 18) & 0xff; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB); + sc->stats.lineCodeViolationCount += + (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR); + regVal = lmc_mii_readreg (sc, 0, 18) & 0xff; + + sc->stats.lossOfFrameCount += + (regVal & T1FRAMER_LOF_MASK) >> 4; + sc->stats.changeOfFrameAlignmentCount += + (regVal & T1FRAMER_COFA_MASK) >> 2; + sc->stats.severelyErroredFrameCount += + regVal & T1FRAMER_SEF_MASK; + } + + if (copy_to_user(ifr->ifr_data, &sc->stats, + sizeof (struct lmc_statistics))) + return -EFAULT; + + ret = 0; + break; + + case LMCIOCCLEARLMCSTATS: /*fold01*/ + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + memset (&sc->stats, 0, sizeof (struct lmc_statistics)); + sc->stats.check = STATCHECK; + sc->stats.version_size = (DRIVER_VERSION << 16) + + sizeof (struct lmc_statistics); + sc->stats.lmc_cardtype = sc->lmc_cardtype; + ret = 0; + break; + + case LMCIOCSETCIRCUIT: /*fold01*/ + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + if(dev->flags & IFF_UP){ + ret = -EBUSY; + break; + } + + if (copy_from_user(&ctl, ifr->ifr_data, sizeof (lmc_ctl_t))) + return -EFAULT; + sc->lmc_media->set_circuit_type(sc, ctl.circuit_type); + sc->ictl.circuit_type = ctl.circuit_type; + ret = 0; + + break; + + case LMCIOCRESET: /*fold01*/ + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + /* Reset driver and bring back to current state */ + printk (" REG16 before reset +%04x\n", lmc_mii_readreg (sc, 0, 16)); + lmc_running_reset (dev); + printk (" REG16 after reset +%04x\n", lmc_mii_readreg (sc, 0, 16)); + + LMC_EVENT_LOG(LMC_EVENT_FORCEDRESET, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16)); + + ret = 0; + break; + +#ifdef DEBUG + case LMCIOCDUMPEVENTLOG: + if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof (u32))) + return -EFAULT; + if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf))) + return -EFAULT; + + ret = 0; + break; +#endif /* end ifdef _DBG_EVENTLOG */ + case LMCIOCT1CONTROL: /*fold01*/ + if (sc->lmc_cardtype != LMC_CARDTYPE_T1){ + ret = -EOPNOTSUPP; + break; + } + break; + case LMCIOCXILINX: /*fold01*/ + { + struct lmc_xilinx_control xc; /*fold02*/ + + if (!capable(CAP_NET_ADMIN)){ + ret = -EPERM; + break; + } + + /* + * Stop the xwitter whlie we restart the hardware + */ + netif_stop_queue(dev); + + if (copy_from_user(&xc, ifr->ifr_data, sizeof (struct lmc_xilinx_control))) + return -EFAULT; + switch(xc.command){ + case lmc_xilinx_reset: /*fold02*/ + { + u16 mii; + mii = lmc_mii_readreg (sc, 0, 16); + + /* + * Make all of them 0 and make input + */ + lmc_gpio_mkinput(sc, 0xff); + + /* + * make the reset output + */ + lmc_gpio_mkoutput(sc, LMC_GEP_RESET); + + /* + * RESET low to force configuration. This also forces + * the transmitter clock to be internal, but we expect to reset + * that later anyway. + */ + + sc->lmc_gpio &= ~LMC_GEP_RESET; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + + /* + * hold for more than 10 microseconds + */ + udelay(50); + + sc->lmc_gpio |= LMC_GEP_RESET; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + + /* + * stop driving Xilinx-related signals + */ + lmc_gpio_mkinput(sc, 0xff); + + /* Reset the frammer hardware */ + sc->lmc_media->set_link_status (sc, 1); + sc->lmc_media->set_status (sc, NULL); +// lmc_softreset(sc); + + { + int i; + for(i = 0; i < 5; i++){ + lmc_led_on(sc, LMC_DS3_LED0); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED0); + lmc_led_on(sc, LMC_DS3_LED1); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED1); + lmc_led_on(sc, LMC_DS3_LED3); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED3); + lmc_led_on(sc, LMC_DS3_LED2); + mdelay(100); + lmc_led_off(sc, LMC_DS3_LED2); + } + } + + + + ret = 0x0; + + } + + break; + case lmc_xilinx_load_prom: /*fold02*/ + { + u16 mii; + int timeout = 500000; + mii = lmc_mii_readreg (sc, 0, 16); + + /* + * Make all of them 0 and make input + */ + lmc_gpio_mkinput(sc, 0xff); + + /* + * make the reset output + */ + lmc_gpio_mkoutput(sc, LMC_GEP_DP | LMC_GEP_RESET); + + /* + * RESET low to force configuration. This also forces + * the transmitter clock to be internal, but we expect to reset + * that later anyway. + */ + + sc->lmc_gpio &= ~(LMC_GEP_RESET | LMC_GEP_DP); + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + + /* + * hold for more than 10 microseconds + */ + udelay(50); + + sc->lmc_gpio |= LMC_GEP_DP | LMC_GEP_RESET; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + /* + * busy wait for the chip to reset + */ + while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 && + (timeout-- > 0)) + ; + + + /* + * stop driving Xilinx-related signals + */ + lmc_gpio_mkinput(sc, 0xff); + + ret = 0x0; + + + break; + + } + + case lmc_xilinx_load: /*fold02*/ + { + char *data; + int pos; + int timeout = 500000; + + if(xc.data == 0x0){ + ret = -EINVAL; + break; + } + + data = kmalloc(xc.len, GFP_KERNEL); + if(data == 0x0){ + printk(KERN_WARNING "%s: Failed to allocate memory for copy\n", dev->name); + ret = -ENOMEM; + break; + } + + if(copy_from_user(data, xc.data, xc.len)) + { + kfree(data); + ret = -ENOMEM; + break; + } + + printk("%s: Starting load of data Len: %d at 0x%p == 0x%p\n", dev->name, xc.len, xc.data, data); + + lmc_gpio_mkinput(sc, 0xff); + + /* + * Clear the Xilinx and start prgramming from the DEC + */ + + /* + * Set ouput as: + * Reset: 0 (active) + * DP: 0 (active) + * Mode: 1 + * + */ + sc->lmc_gpio = 0x00; + sc->lmc_gpio &= ~LMC_GEP_DP; + sc->lmc_gpio &= ~LMC_GEP_RESET; + sc->lmc_gpio |= LMC_GEP_MODE; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + lmc_gpio_mkoutput(sc, LMC_GEP_MODE | LMC_GEP_DP | LMC_GEP_RESET); + + /* + * Wait at least 10 us 20 to be safe + */ + udelay(50); + + /* + * Clear reset and activate programming lines + * Reset: Input + * DP: Input + * Clock: Output + * Data: Output + * Mode: Output + */ + lmc_gpio_mkinput(sc, LMC_GEP_DP | LMC_GEP_RESET); + + /* + * Set LOAD, DATA, Clock to 1 + */ + sc->lmc_gpio = 0x00; + sc->lmc_gpio |= LMC_GEP_MODE; + sc->lmc_gpio |= LMC_GEP_DATA; + sc->lmc_gpio |= LMC_GEP_CLK; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + lmc_gpio_mkoutput(sc, LMC_GEP_DATA | LMC_GEP_CLK | LMC_GEP_MODE ); + + /* + * busy wait for the chip to reset + */ + while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 && + (timeout-- > 0)) + ; + + printk(KERN_DEBUG "%s: Waited %d for the Xilinx to clear it's memory\n", dev->name, 500000-timeout); + + for(pos = 0; pos < xc.len; pos++){ + switch(data[pos]){ + case 0: + sc->lmc_gpio &= ~LMC_GEP_DATA; /* Data is 0 */ + break; + case 1: + sc->lmc_gpio |= LMC_GEP_DATA; /* Data is 1 */ + break; + default: + printk(KERN_WARNING "%s Bad data in xilinx programming data at %d, got %d wanted 0 or 1\n", dev->name, pos, data[pos]); + sc->lmc_gpio |= LMC_GEP_DATA; /* Assume it's 1 */ + } + sc->lmc_gpio &= ~LMC_GEP_CLK; /* Clock to zero */ + sc->lmc_gpio |= LMC_GEP_MODE; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + udelay(1); + + sc->lmc_gpio |= LMC_GEP_CLK; /* Put the clack back to one */ + sc->lmc_gpio |= LMC_GEP_MODE; + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + udelay(1); + } + if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0){ + printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (corrupted data)\n", dev->name); + } + else if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_DP) == 0){ + printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (done)\n", dev->name); + } + else { + printk(KERN_DEBUG "%s: Done reprogramming Xilinx, %d bits, good luck!\n", dev->name, pos); + } + + lmc_gpio_mkinput(sc, 0xff); + + sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + kfree(data); + + ret = 0; + + break; + } + default: /*fold02*/ + ret = -EBADE; + break; + } + + netif_wake_queue(dev); + sc->lmc_txfull = 0; + + } + break; + default: /*fold01*/ + /* If we don't know what to do, give the protocol a shot. */ + ret = lmc_proto_ioctl (sc, ifr, cmd); + break; + } + + spin_unlock_irqrestore(&sc->lmc_lock, flags); /*fold01*/ + + lmc_trace(dev, "lmc_ioctl out"); + + return ret; +} + + +/* the watchdog process that cruises around */ +static void lmc_watchdog (unsigned long data) /*fold00*/ +{ + struct net_device *dev = (struct net_device *) data; + lmc_softc_t *sc; + int link_status; + u_int32_t ticks; + unsigned long flags; + + sc = dev->priv; + + lmc_trace(dev, "lmc_watchdog in"); + + spin_lock_irqsave(&sc->lmc_lock, flags); + + if(sc->check != 0xBEAFCAFE){ + printk("LMC: Corrupt net_device stuct, breaking out\n"); + spin_unlock_irqrestore(&sc->lmc_lock, flags); + return; + } + + + /* Make sure the tx jabber and rx watchdog are off, + * and the transmit and receive processes are running. + */ + + LMC_CSR_WRITE (sc, csr_15, 0x00000011); + sc->lmc_cmdmode |= TULIP_CMD_TXRUN | TULIP_CMD_RXRUN; + LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode); + + if (sc->lmc_ok == 0) + goto kick_timer; + + LMC_EVENT_LOG(LMC_EVENT_WATCHDOG, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16)); + + /* --- begin time out check ----------------------------------- + * check for a transmit interrupt timeout + * Has the packet xmt vs xmt serviced threshold been exceeded */ + if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && + sc->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd == 0) + { + + /* wait for the watchdog to come around again */ + sc->tx_TimeoutInd = 1; + } + else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && + sc->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd) + { + + LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0); + + sc->tx_TimeoutDisplay = 1; + sc->stats.tx_TimeoutCnt++; + + /* DEC chip is stuck, hit it with a RESET!!!! */ + lmc_running_reset (dev); + + + /* look at receive & transmit process state to make sure they are running */ + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + + /* look at: DSR - 02 for Reg 16 + * CTS - 08 + * DCD - 10 + * RI - 20 + * for Reg 17 + */ + LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg (sc, 0, 16), lmc_mii_readreg (sc, 0, 17)); + + /* reset the transmit timeout detection flag */ + sc->tx_TimeoutInd = 0; + sc->lastlmc_taint_tx = sc->lmc_taint_tx; + sc->lasttx_packets = sc->stats.tx_packets; + } + else + { + sc->tx_TimeoutInd = 0; + sc->lastlmc_taint_tx = sc->lmc_taint_tx; + sc->lasttx_packets = sc->stats.tx_packets; + } + + /* --- end time out check ----------------------------------- */ + + + link_status = sc->lmc_media->get_link_status (sc); + + /* + * hardware level link lost, but the interface is marked as up. + * Mark it as down. + */ + if ((link_status == 0) && (sc->last_link_status != 0)) { + printk(KERN_WARNING "%s: hardware/physical link down\n", dev->name); + sc->last_link_status = 0; + /* lmc_reset (sc); Why reset??? The link can go down ok */ + + /* Inform the world that link has been lost */ + dev->flags &= ~IFF_RUNNING; + } + + /* + * hardware link is up, but the interface is marked as down. + * Bring it back up again. + */ + if (link_status != 0 && sc->last_link_status == 0) { + printk(KERN_WARNING "%s: hardware/physical link up\n", dev->name); + sc->last_link_status = 1; + /* lmc_reset (sc); Again why reset??? */ + + /* Inform the world that link protocol is back up. */ + dev->flags |= IFF_RUNNING; + + /* Now we have to tell the syncppp that we had an outage + * and that it should deal. Calling sppp_reopen here + * should do the trick, but we may have to call sppp_close + * when the link goes down, and call sppp_open here. + * Subject to more testing. + * --bbraun + */ + + lmc_proto_reopen(sc); + + } + + /* Call media specific watchdog functions */ + sc->lmc_media->watchdog(sc); + + /* + * Poke the transmitter to make sure it + * never stops, even if we run out of mem + */ + LMC_CSR_WRITE(sc, csr_rxpoll, 0); + + /* + * Check for code that failed + * and try and fix it as appropriate + */ + if(sc->failed_ring == 1){ + /* + * Failed to setup the recv/xmit rin + * Try again + */ + sc->failed_ring = 0; + lmc_softreset(sc); + } + if(sc->failed_recv_alloc == 1){ + /* + * We failed to alloc mem in the + * interrupt handler, go through the rings + * and rebuild them + */ + sc->failed_recv_alloc = 0; + lmc_softreset(sc); + } + + + /* + * remember the timer value + */ +kick_timer: + + ticks = LMC_CSR_READ (sc, csr_gp_timer); + LMC_CSR_WRITE (sc, csr_gp_timer, 0xffffffffUL); + sc->ictl.ticks = 0x0000ffff - (ticks & 0x0000ffff); + + /* + * restart this timer. + */ + sc->timer.expires = jiffies + (HZ); + add_timer (&sc->timer); + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_watchdog out"); + +} + +static void lmc_setup(struct net_device * const dev) /*fold00*/ +{ + lmc_trace(dev, "lmc_setup in"); + + dev->type = ARPHRD_HDLC; + dev->hard_start_xmit = lmc_start_xmit; + dev->open = lmc_open; + dev->stop = lmc_close; + dev->get_stats = lmc_get_stats; + dev->do_ioctl = lmc_ioctl; + dev->tx_timeout = lmc_driver_timeout; + dev->watchdog_timeo = (HZ); /* 1 second */ + + lmc_trace(dev, "lmc_setup out"); +} + + +static int __devinit lmc_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + lmc_softc_t *sc; + u16 subdevice; + u_int16_t AdapModelNum; + int err = -ENOMEM; + static int cards_found; +#ifndef GCOM + /* We name by type not by vendor */ + static const char lmcname[] = "hdlc%d"; +#else + /* + * GCOM uses LMC vendor name so that clients can know which card + * to attach to. + */ + static const char lmcname[] = "lmc%d"; +#endif + + + /* + * Allocate our own device structure + */ + dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup); + if (!dev) { + printk (KERN_ERR "lmc:alloc_netdev for device failed\n"); + goto out1; + } + + lmc_trace(dev, "lmc_init_one in"); + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "lmc: pci enable failed:%d\n", err); + goto out2; + } + + if (pci_request_regions(pdev, "lmc")) { + printk(KERN_ERR "lmc: pci_request_region failed\n"); + err = -EIO; + goto out3; + } + + pci_set_drvdata(pdev, dev); + + if(lmc_first_load == 0){ + printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n", + DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION); + lmc_first_load = 1; + } + + sc = dev->priv; + sc->lmc_device = dev; + sc->name = dev->name; + + /* Initialize the sppp layer */ + /* An ioctl can cause a subsequent detach for raw frame interface */ + sc->if_type = LMC_PPP; + sc->check = 0xBEAFCAFE; + dev->base_addr = pci_resource_start(pdev, 0); + dev->irq = pdev->irq; + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + /* + * This will get the protocol layer ready and do any 1 time init's + * Must have a valid sc and dev structure + */ + lmc_proto_init(sc); + + lmc_proto_attach(sc); + + /* + * Why were we changing this??? + dev->tx_queue_len = 100; + */ + + /* Init the spin lock so can call it latter */ + + spin_lock_init(&sc->lmc_lock); + pci_set_master(pdev); + + printk ("%s: detected at %lx, irq %d\n", dev->name, + dev->base_addr, dev->irq); + + if (register_netdev (dev) != 0) { + printk (KERN_ERR "%s: register_netdev failed.\n", dev->name); + goto out4; + } + + sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN; + sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT; + + /* + * + * Check either the subvendor or the subdevice, some systems reverse + * the setting in the bois, seems to be version and arch dependent? + * Fix the error, exchange the two values + */ + if ((subdevice = pdev->subsystem_device) == PCI_VENDOR_ID_LMC) + subdevice = pdev->subsystem_vendor; + + switch (subdevice) { + case PCI_DEVICE_ID_LMC_HSSI: + printk ("%s: LMC HSSI\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_HSSI; + sc->lmc_media = &lmc_hssi_media; + break; + case PCI_DEVICE_ID_LMC_DS3: + printk ("%s: LMC DS3\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_DS3; + sc->lmc_media = &lmc_ds3_media; + break; + case PCI_DEVICE_ID_LMC_SSI: + printk ("%s: LMC SSI\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_SSI; + sc->lmc_media = &lmc_ssi_media; + break; + case PCI_DEVICE_ID_LMC_T1: + printk ("%s: LMC T1\n", dev->name); + sc->lmc_cardtype = LMC_CARDTYPE_T1; + sc->lmc_media = &lmc_t1_media; + break; + default: + printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); + break; + } + + lmc_initcsrs (sc, dev->base_addr, 8); + + lmc_gpio_mkinput (sc, 0xff); + sc->lmc_gpio = 0; /* drive no signals yet */ + + sc->lmc_media->defaults (sc); + + sc->lmc_media->set_link_status (sc, LMC_LINK_UP); + + /* verify that the PCI Sub System ID matches the Adapter Model number + * from the MII register + */ + AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4; + + if ((AdapModelNum == LMC_ADAP_T1 + && subdevice == PCI_DEVICE_ID_LMC_T1) || /* detect LMC1200 */ + (AdapModelNum == LMC_ADAP_SSI + && subdevice == PCI_DEVICE_ID_LMC_SSI) || /* detect LMC1000 */ + (AdapModelNum == LMC_ADAP_DS3 + && subdevice == PCI_DEVICE_ID_LMC_DS3) || /* detect LMC5245 */ + (AdapModelNum == LMC_ADAP_HSSI + && subdevice == PCI_DEVICE_ID_LMC_HSSI)) + { /* detect LMC5200 */ + + } + else { + printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n", + dev->name, AdapModelNum, subdevice); +// return (NULL); + } + /* + * reset clock + */ + LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL); + + sc->board_idx = cards_found++; + sc->stats.check = STATCHECK; + sc->stats.version_size = (DRIVER_VERSION << 16) + + sizeof (struct lmc_statistics); + sc->stats.lmc_cardtype = sc->lmc_cardtype; + + sc->lmc_ok = 0; + sc->last_link_status = 0; + + lmc_trace(dev, "lmc_init_one out"); + return 0; + + out4: + lmc_proto_detach(sc); + out3: + if (pdev) { + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + } + out2: + free_netdev(dev); + out1: + return err; +} + +/* + * Called from pci when removing module. + */ +static void __devexit lmc_remove_one (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + lmc_softc_t *sc = dev->priv; + + printk("%s: removing...\n", dev->name); + lmc_proto_detach(sc); + unregister_netdev(dev); + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + } +} + +/* After this is called, packets can be sent. + * Does not initialize the addresses + */ +static int lmc_open (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc = dev->priv; + + lmc_trace(dev, "lmc_open in"); + + lmc_led_on(sc, LMC_DS3_LED0); + + lmc_dec_reset (sc); + lmc_reset (sc); + + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, + lmc_mii_readreg (sc, 0, 16), + lmc_mii_readreg (sc, 0, 17)); + + + if (sc->lmc_ok){ + lmc_trace(dev, "lmc_open lmc_ok out"); + return (0); + } + + lmc_softreset (sc); + + /* Since we have to use PCI bus, this should work on x86,alpha,ppc */ + if (request_irq (dev->irq, &lmc_interrupt, SA_SHIRQ, dev->name, dev)){ + printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq); + lmc_trace(dev, "lmc_open irq failed out"); + return -EAGAIN; + } + sc->got_irq = 1; + + /* Assert Terminal Active */ + sc->lmc_miireg16 |= LMC_MII16_LED_ALL; + sc->lmc_media->set_link_status (sc, LMC_LINK_UP); + + /* + * reset to last state. + */ + sc->lmc_media->set_status (sc, NULL); + + /* setup default bits to be used in tulip_desc_t transmit descriptor + * -baz */ + sc->TxDescriptControlInit = ( + LMC_TDES_INTERRUPT_ON_COMPLETION + | LMC_TDES_FIRST_SEGMENT + | LMC_TDES_LAST_SEGMENT + | LMC_TDES_SECOND_ADDR_CHAINED + | LMC_TDES_DISABLE_PADDING + ); + + if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) { + /* disable 32 bit CRC generated by ASIC */ + sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE; + } + sc->lmc_media->set_crc_length(sc, sc->ictl.crc_length); + /* Acknoledge the Terminal Active and light LEDs */ + + /* dev->flags |= IFF_UP; */ + + lmc_proto_open(sc); + + dev->do_ioctl = lmc_ioctl; + + + netif_start_queue(dev); + + sc->stats.tx_tbusy0++ ; + + /* + * select what interrupts we want to get + */ + sc->lmc_intrmask = 0; + /* Should be using the default interrupt mask defined in the .h file. */ + sc->lmc_intrmask |= (TULIP_STS_NORMALINTR + | TULIP_STS_RXINTR + | TULIP_STS_TXINTR + | TULIP_STS_ABNRMLINTR + | TULIP_STS_SYSERROR + | TULIP_STS_TXSTOPPED + | TULIP_STS_TXUNDERFLOW + | TULIP_STS_RXSTOPPED + | TULIP_STS_RXNOBUF + ); + LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask); + + sc->lmc_cmdmode |= TULIP_CMD_TXRUN; + sc->lmc_cmdmode |= TULIP_CMD_RXRUN; + LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode); + + sc->lmc_ok = 1; /* Run watchdog */ + + /* + * Set the if up now - pfb + */ + + sc->last_link_status = 1; + + /* + * Setup a timer for the watchdog on probe, and start it running. + * Since lmc_ok == 0, it will be a NOP for now. + */ + init_timer (&sc->timer); + sc->timer.expires = jiffies + HZ; + sc->timer.data = (unsigned long) dev; + sc->timer.function = &lmc_watchdog; + add_timer (&sc->timer); + + lmc_trace(dev, "lmc_open out"); + + return (0); +} + +/* Total reset to compensate for the AdTran DSU doing bad things + * under heavy load + */ + +static void lmc_running_reset (struct net_device *dev) /*fold00*/ +{ + + lmc_softc_t *sc = (lmc_softc_t *) dev->priv; + + lmc_trace(dev, "lmc_runnig_reset in"); + + /* stop interrupts */ + /* Clear the interrupt mask */ + LMC_CSR_WRITE (sc, csr_intr, 0x00000000); + + lmc_dec_reset (sc); + lmc_reset (sc); + lmc_softreset (sc); + /* sc->lmc_miireg16 |= LMC_MII16_LED_ALL; */ + sc->lmc_media->set_link_status (sc, 1); + sc->lmc_media->set_status (sc, NULL); + + //dev->flags |= IFF_RUNNING; + + netif_wake_queue(dev); + + sc->lmc_txfull = 0; + sc->stats.tx_tbusy0++ ; + + sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK; + LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask); + + sc->lmc_cmdmode |= (TULIP_CMD_TXRUN | TULIP_CMD_RXRUN); + LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode); + + lmc_trace(dev, "lmc_runnin_reset_out"); +} + + +/* This is what is called when you ifconfig down a device. + * This disables the timer for the watchdog and keepalives, + * and disables the irq for dev. + */ +static int lmc_close (struct net_device *dev) /*fold00*/ +{ + /* not calling release_region() as we should */ + lmc_softc_t *sc; + + lmc_trace(dev, "lmc_close in"); + + sc = dev->priv; + sc->lmc_ok = 0; + sc->lmc_media->set_link_status (sc, 0); + del_timer (&sc->timer); + lmc_proto_close(sc); + lmc_ifdown (dev); + + lmc_trace(dev, "lmc_close out"); + + return 0; +} + +/* Ends the transfer of packets */ +/* When the interface goes down, this is called */ +static int lmc_ifdown (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc = dev->priv; + u32 csr6; + int i; + + lmc_trace(dev, "lmc_ifdown in"); + + /* Don't let anything else go on right now */ + // dev->start = 0; + netif_stop_queue(dev); + sc->stats.tx_tbusy1++ ; + + /* stop interrupts */ + /* Clear the interrupt mask */ + LMC_CSR_WRITE (sc, csr_intr, 0x00000000); + + /* Stop Tx and Rx on the chip */ + csr6 = LMC_CSR_READ (sc, csr_command); + csr6 &= ~LMC_DEC_ST; /* Turn off the Transmission bit */ + csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */ + LMC_CSR_WRITE (sc, csr_command, csr6); + + dev->flags &= ~IFF_RUNNING; + + sc->stats.rx_missed_errors += + LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + + /* release the interrupt */ + if(sc->got_irq == 1){ + free_irq (dev->irq, dev); + sc->got_irq = 0; + } + + /* free skbuffs in the Rx queue */ + for (i = 0; i < LMC_RXDESCS; i++) + { + struct sk_buff *skb = sc->lmc_rxq[i]; + sc->lmc_rxq[i] = NULL; + sc->lmc_rxring[i].status = 0; + sc->lmc_rxring[i].length = 0; + sc->lmc_rxring[i].buffer1 = 0xDEADBEEF; + if (skb != NULL) + dev_kfree_skb(skb); + sc->lmc_rxq[i] = NULL; + } + + for (i = 0; i < LMC_TXDESCS; i++) + { + if (sc->lmc_txq[i] != NULL) + dev_kfree_skb(sc->lmc_txq[i]); + sc->lmc_txq[i] = NULL; + } + + lmc_led_off (sc, LMC_MII16_LED_ALL); + + netif_wake_queue(dev); + sc->stats.tx_tbusy0++ ; + + lmc_trace(dev, "lmc_ifdown out"); + + return 0; +} + +/* Interrupt handling routine. This will take an incoming packet, or clean + * up after a trasmit. + */ +static irqreturn_t lmc_interrupt (int irq, void *dev_instance, struct pt_regs *regs) /*fold00*/ +{ + struct net_device *dev = (struct net_device *) dev_instance; + lmc_softc_t *sc; + u32 csr; + int i; + s32 stat; + unsigned int badtx; + u32 firstcsr; + int max_work = LMC_RXDESCS; + int handled = 0; + + lmc_trace(dev, "lmc_interrupt in"); + + sc = dev->priv; + + spin_lock(&sc->lmc_lock); + + /* + * Read the csr to find what interrupts we have (if any) + */ + csr = LMC_CSR_READ (sc, csr_status); + + /* + * Make sure this is our interrupt + */ + if ( ! (csr & sc->lmc_intrmask)) { + goto lmc_int_fail_out; + } + + firstcsr = csr; + + /* always go through this loop at least once */ + while (csr & sc->lmc_intrmask) { + handled = 1; + + /* + * Clear interrupt bits, we handle all case below + */ + LMC_CSR_WRITE (sc, csr_status, csr); + + /* + * One of + * - Transmit process timed out CSR5<1> + * - Transmit jabber timeout CSR5<3> + * - Transmit underflow CSR5<5> + * - Transmit Receiver buffer unavailable CSR5<7> + * - Receive process stopped CSR5<8> + * - Receive watchdog timeout CSR5<9> + * - Early transmit interrupt CSR5<10> + * + * Is this really right? Should we do a running reset for jabber? + * (being a WAN card and all) + */ + if (csr & TULIP_STS_ABNRMLINTR){ + lmc_running_reset (dev); + break; + } + + if (csr & TULIP_STS_RXINTR){ + lmc_trace(dev, "rx interrupt"); + lmc_rx (dev); + + } + if (csr & (TULIP_STS_TXINTR | TULIP_STS_TXNOBUF | TULIP_STS_TXSTOPPED)) { + + int n_compl = 0 ; + /* reset the transmit timeout detection flag -baz */ + sc->stats.tx_NoCompleteCnt = 0; + + badtx = sc->lmc_taint_tx; + i = badtx % LMC_TXDESCS; + + while ((badtx < sc->lmc_next_tx)) { + stat = sc->lmc_txring[i].status; + + LMC_EVENT_LOG (LMC_EVENT_XMTINT, stat, + sc->lmc_txring[i].length); + /* + * If bit 31 is 1 the tulip owns it break out of the loop + */ + if (stat & 0x80000000) + break; + + n_compl++ ; /* i.e., have an empty slot in ring */ + /* + * If we have no skbuff or have cleared it + * Already continue to the next buffer + */ + if (sc->lmc_txq[i] == NULL) + continue; + + /* + * Check the total error summary to look for any errors + */ + if (stat & 0x8000) { + sc->stats.tx_errors++; + if (stat & 0x4104) + sc->stats.tx_aborted_errors++; + if (stat & 0x0C00) + sc->stats.tx_carrier_errors++; + if (stat & 0x0200) + sc->stats.tx_window_errors++; + if (stat & 0x0002) + sc->stats.tx_fifo_errors++; + } + else { + + sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff; + + sc->stats.tx_packets++; + } + + // dev_kfree_skb(sc->lmc_txq[i]); + dev_kfree_skb_irq(sc->lmc_txq[i]); + sc->lmc_txq[i] = NULL; + + badtx++; + i = badtx % LMC_TXDESCS; + } + + if (sc->lmc_next_tx - badtx > LMC_TXDESCS) + { + printk ("%s: out of sync pointer\n", dev->name); + badtx += LMC_TXDESCS; + } + LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0); + sc->lmc_txfull = 0; + netif_wake_queue(dev); + sc->stats.tx_tbusy0++ ; + + +#ifdef DEBUG + sc->stats.dirtyTx = badtx; + sc->stats.lmc_next_tx = sc->lmc_next_tx; + sc->stats.lmc_txfull = sc->lmc_txfull; +#endif + sc->lmc_taint_tx = badtx; + + /* + * Why was there a break here??? + */ + } /* end handle transmit interrupt */ + + if (csr & TULIP_STS_SYSERROR) { + u32 error; + printk (KERN_WARNING "%s: system bus error csr: %#8.8x\n", dev->name, csr); + error = csr>>23 & 0x7; + switch(error){ + case 0x000: + printk(KERN_WARNING "%s: Parity Fault (bad)\n", dev->name); + break; + case 0x001: + printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name); + break; + case 0x010: + printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name); + break; + default: + printk(KERN_WARNING "%s: This bus error code was supposed to be reserved!\n", dev->name); + } + lmc_dec_reset (sc); + lmc_reset (sc); + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, + lmc_mii_readreg (sc, 0, 16), + lmc_mii_readreg (sc, 0, 17)); + + } + + + if(max_work-- <= 0) + break; + + /* + * Get current csr status to make sure + * we've cleared all interrupts + */ + csr = LMC_CSR_READ (sc, csr_status); + } /* end interrupt loop */ + LMC_EVENT_LOG(LMC_EVENT_INT, firstcsr, csr); + +lmc_int_fail_out: + + spin_unlock(&sc->lmc_lock); + + lmc_trace(dev, "lmc_interrupt out"); + return IRQ_RETVAL(handled); +} + +static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc; + u32 flag; + int entry; + int ret = 0; + unsigned long flags; + + lmc_trace(dev, "lmc_start_xmit in"); + + sc = dev->priv; + + spin_lock_irqsave(&sc->lmc_lock, flags); + + /* normal path, tbusy known to be zero */ + + entry = sc->lmc_next_tx % LMC_TXDESCS; + + sc->lmc_txq[entry] = skb; + sc->lmc_txring[entry].buffer1 = virt_to_bus (skb->data); + + LMC_CONSOLE_LOG("xmit", skb->data, skb->len); + +#ifndef GCOM + /* If the queue is less than half full, don't interrupt */ + if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS / 2) + { + /* Do not interrupt on completion of this packet */ + flag = 0x60000000; + netif_wake_queue(dev); + } + else if (sc->lmc_next_tx - sc->lmc_taint_tx == LMC_TXDESCS / 2) + { + /* This generates an interrupt on completion of this packet */ + flag = 0xe0000000; + netif_wake_queue(dev); + } + else if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS - 1) + { + /* Do not interrupt on completion of this packet */ + flag = 0x60000000; + netif_wake_queue(dev); + } + else + { + /* This generates an interrupt on completion of this packet */ + flag = 0xe0000000; + sc->lmc_txfull = 1; + netif_stop_queue(dev); + } +#else + flag = LMC_TDES_INTERRUPT_ON_COMPLETION; + + if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1) + { /* ring full, go busy */ + sc->lmc_txfull = 1; + netif_stop_queue(dev); + sc->stats.tx_tbusy1++ ; + LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0); + } +#endif + + + if (entry == LMC_TXDESCS - 1) /* last descriptor in ring */ + flag |= LMC_TDES_END_OF_RING; /* flag as such for Tulip */ + + /* don't pad small packets either */ + flag = sc->lmc_txring[entry].length = (skb->len) | flag | + sc->TxDescriptControlInit; + + /* set the transmit timeout flag to be checked in + * the watchdog timer handler. -baz + */ + + sc->stats.tx_NoCompleteCnt++; + sc->lmc_next_tx++; + + /* give ownership to the chip */ + LMC_EVENT_LOG(LMC_EVENT_XMT, flag, entry); + sc->lmc_txring[entry].status = 0x80000000; + + /* send now! */ + LMC_CSR_WRITE (sc, csr_txpoll, 0); + + dev->trans_start = jiffies; + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_start_xmit_out"); + return ret; +} + + +static int lmc_rx (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc; + int i; + int rx_work_limit = LMC_RXDESCS; + unsigned int next_rx; + int rxIntLoopCnt; /* debug -baz */ + int localLengthErrCnt = 0; + long stat; + struct sk_buff *skb, *nsb; + u16 len; + + lmc_trace(dev, "lmc_rx in"); + + sc = dev->priv; + + lmc_led_on(sc, LMC_DS3_LED3); + + rxIntLoopCnt = 0; /* debug -baz */ + + i = sc->lmc_next_rx % LMC_RXDESCS; + next_rx = sc->lmc_next_rx; + + while (((stat = sc->lmc_rxring[i].status) & LMC_RDES_OWN_BIT) != DESC_OWNED_BY_DC21X4) + { + rxIntLoopCnt++; /* debug -baz */ + len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER); + if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */ + if ((stat & 0x0000ffff) != 0x7fff) { + /* Oversized frame */ + sc->stats.rx_length_errors++; + goto skip_packet; + } + } + + if(stat & 0x00000008){ /* Catch a dribbling bit error */ + sc->stats.rx_errors++; + sc->stats.rx_frame_errors++; + goto skip_packet; + } + + + if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */ + sc->stats.rx_errors++; + sc->stats.rx_crc_errors++; + goto skip_packet; + } + + + if (len > LMC_PKT_BUF_SZ){ + sc->stats.rx_length_errors++; + localLengthErrCnt++; + goto skip_packet; + } + + if (len < sc->lmc_crcSize + 2) { + sc->stats.rx_length_errors++; + sc->stats.rx_SmallPktCnt++; + localLengthErrCnt++; + goto skip_packet; + } + + if(stat & 0x00004000){ + printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name); + } + + len -= sc->lmc_crcSize; + + skb = sc->lmc_rxq[i]; + + /* + * We ran out of memory at some point + * just allocate an skb buff and continue. + */ + + if(skb == 0x0){ + nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2); + if (nsb) { + sc->lmc_rxq[i] = nsb; + nsb->dev = dev; + sc->lmc_rxring[i].buffer1 = virt_to_bus (nsb->tail); + } + sc->failed_recv_alloc = 1; + goto skip_packet; + } + + dev->last_rx = jiffies; + sc->stats.rx_packets++; + sc->stats.rx_bytes += len; + + LMC_CONSOLE_LOG("recv", skb->data, len); + + /* + * I'm not sure of the sanity of this + * Packets could be arriving at a constant + * 44.210mbits/sec and we're going to copy + * them into a new buffer?? + */ + + if(len > (LMC_MTU - (LMC_MTU>>2))){ /* len > LMC_MTU * 0.75 */ + /* + * If it's a large packet don't copy it just hand it up + */ + give_it_anyways: + + sc->lmc_rxq[i] = NULL; + sc->lmc_rxring[i].buffer1 = 0x0; + + skb_put (skb, len); + skb->protocol = lmc_proto_type(sc, skb); + skb->protocol = htons(ETH_P_WAN_PPP); + skb->mac.raw = skb->data; +// skb->nh.raw = skb->data; + skb->dev = dev; + lmc_proto_netif(sc, skb); + + /* + * This skb will be destroyed by the upper layers, make a new one + */ + nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2); + if (nsb) { + sc->lmc_rxq[i] = nsb; + nsb->dev = dev; + sc->lmc_rxring[i].buffer1 = virt_to_bus (nsb->tail); + /* Transferred to 21140 below */ + } + else { + /* + * We've run out of memory, stop trying to allocate + * memory and exit the interrupt handler + * + * The chip may run out of receivers and stop + * in which care we'll try to allocate the buffer + * again. (once a second) + */ + sc->stats.rx_BuffAllocErr++; + LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len); + sc->failed_recv_alloc = 1; + goto skip_out_of_mem; + } + } + else { + nsb = dev_alloc_skb(len); + if(!nsb) { + goto give_it_anyways; + } + memcpy(skb_put(nsb, len), skb->data, len); + + nsb->protocol = lmc_proto_type(sc, skb); + nsb->mac.raw = nsb->data; +// nsb->nh.raw = nsb->data; + nsb->dev = dev; + lmc_proto_netif(sc, nsb); + } + + skip_packet: + LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len); + sc->lmc_rxring[i].status = DESC_OWNED_BY_DC21X4; + + sc->lmc_next_rx++; + i = sc->lmc_next_rx % LMC_RXDESCS; + rx_work_limit--; + if (rx_work_limit < 0) + break; + } + + /* detect condition for LMC1000 where DSU cable attaches and fills + * descriptors with bogus packets + * + if (localLengthErrCnt > LMC_RXDESCS - 3) { + sc->stats.rx_BadPktSurgeCnt++; + LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, + localLengthErrCnt, + sc->stats.rx_BadPktSurgeCnt); + } */ + + /* save max count of receive descriptors serviced */ + if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) { + sc->stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */ + } + +#ifdef DEBUG + if (rxIntLoopCnt == 0) + { + for (i = 0; i < LMC_RXDESCS; i++) + { + if ((sc->lmc_rxring[i].status & LMC_RDES_OWN_BIT) + != DESC_OWNED_BY_DC21X4) + { + rxIntLoopCnt++; + } + } + LMC_EVENT_LOG(LMC_EVENT_RCVEND, rxIntLoopCnt, 0); + } +#endif + + + lmc_led_off(sc, LMC_DS3_LED3); + +skip_out_of_mem: + + lmc_trace(dev, "lmc_rx out"); + + return 0; +} + +static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/ +{ + lmc_softc_t *sc = dev->priv; + unsigned long flags; + + lmc_trace(dev, "lmc_get_stats in"); + + + spin_lock_irqsave(&sc->lmc_lock, flags); + + sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_get_stats out"); + + return (struct net_device_stats *) &sc->stats; +} + +static struct pci_driver lmc_driver = { + .name = "lmc", + .id_table = lmc_pci_tbl, + .probe = lmc_init_one, + .remove = __devexit_p(lmc_remove_one), +}; + +static int __init init_lmc(void) +{ + return pci_module_init(&lmc_driver); +} + +static void __exit exit_lmc(void) +{ + pci_unregister_driver(&lmc_driver); +} + +module_init(init_lmc); +module_exit(exit_lmc); + +unsigned lmc_mii_readreg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno) /*fold00*/ +{ + int i; + int command = (0xf6 << 10) | (devaddr << 5) | regno; + int retval = 0; + + lmc_trace(sc->lmc_device, "lmc_mii_readreg in"); + + LMC_MII_SYNC (sc); + + lmc_trace(sc->lmc_device, "lmc_mii_readreg: done sync"); + + for (i = 15; i >= 0; i--) + { + int dataval = (command & (1 << i)) ? 0x20000 : 0; + + LMC_CSR_WRITE (sc, csr_9, dataval); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + LMC_CSR_WRITE (sc, csr_9, dataval | 0x10000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + } + + lmc_trace(sc->lmc_device, "lmc_mii_readreg: done1"); + + for (i = 19; i > 0; i--) + { + LMC_CSR_WRITE (sc, csr_9, 0x40000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + retval = (retval << 1) | ((LMC_CSR_READ (sc, csr_9) & 0x80000) ? 1 : 0); + LMC_CSR_WRITE (sc, csr_9, 0x40000 | 0x10000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + } + + lmc_trace(sc->lmc_device, "lmc_mii_readreg out"); + + return (retval >> 1) & 0xffff; +} + +void lmc_mii_writereg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data) /*fold00*/ +{ + int i = 32; + int command = (0x5002 << 16) | (devaddr << 23) | (regno << 18) | data; + + lmc_trace(sc->lmc_device, "lmc_mii_writereg in"); + + LMC_MII_SYNC (sc); + + i = 31; + while (i >= 0) + { + int datav; + + if (command & (1 << i)) + datav = 0x20000; + else + datav = 0x00000; + + LMC_CSR_WRITE (sc, csr_9, datav); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + LMC_CSR_WRITE (sc, csr_9, (datav | 0x10000)); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + i--; + } + + i = 2; + while (i > 0) + { + LMC_CSR_WRITE (sc, csr_9, 0x40000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + LMC_CSR_WRITE (sc, csr_9, 0x50000); + lmc_delay (); + /* __SLOW_DOWN_IO; */ + i--; + } + + lmc_trace(sc->lmc_device, "lmc_mii_writereg out"); +} + +static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/ +{ + int i; + + lmc_trace(sc->lmc_device, "lmc_softreset in"); + + /* Initialize the receive rings and buffers. */ + sc->lmc_txfull = 0; + sc->lmc_next_rx = 0; + sc->lmc_next_tx = 0; + sc->lmc_taint_rx = 0; + sc->lmc_taint_tx = 0; + + /* + * Setup each one of the receiver buffers + * allocate an skbuff for each one, setup the descriptor table + * and point each buffer at the next one + */ + + for (i = 0; i < LMC_RXDESCS; i++) + { + struct sk_buff *skb; + + if (sc->lmc_rxq[i] == NULL) + { + skb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2); + if(skb == NULL){ + printk(KERN_WARNING "%s: Failed to allocate receiver ring, will try again\n", sc->name); + sc->failed_ring = 1; + break; + } + else{ + sc->lmc_rxq[i] = skb; + } + } + else + { + skb = sc->lmc_rxq[i]; + } + + skb->dev = sc->lmc_device; + + /* owned by 21140 */ + sc->lmc_rxring[i].status = 0x80000000; + + /* used to be PKT_BUF_SZ now uses skb since we lose some to head room */ + sc->lmc_rxring[i].length = skb->end - skb->data; + + /* use to be tail which is dumb since you're thinking why write + * to the end of the packj,et but since there's nothing there tail == data + */ + sc->lmc_rxring[i].buffer1 = virt_to_bus (skb->data); + + /* This is fair since the structure is static and we have the next address */ + sc->lmc_rxring[i].buffer2 = virt_to_bus (&sc->lmc_rxring[i + 1]); + + } + + /* + * Sets end of ring + */ + sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */ + sc->lmc_rxring[i - 1].buffer2 = virt_to_bus (&sc->lmc_rxring[0]); /* Point back to the start */ + LMC_CSR_WRITE (sc, csr_rxlist, virt_to_bus (sc->lmc_rxring)); /* write base address */ + + + /* Initialize the transmit rings and buffers */ + for (i = 0; i < LMC_TXDESCS; i++) + { + if (sc->lmc_txq[i] != NULL){ /* have buffer */ + dev_kfree_skb(sc->lmc_txq[i]); /* free it */ + sc->stats.tx_dropped++; /* We just dropped a packet */ + } + sc->lmc_txq[i] = NULL; + sc->lmc_txring[i].status = 0x00000000; + sc->lmc_txring[i].buffer2 = virt_to_bus (&sc->lmc_txring[i + 1]); + } + sc->lmc_txring[i - 1].buffer2 = virt_to_bus (&sc->lmc_txring[0]); + LMC_CSR_WRITE (sc, csr_txlist, virt_to_bus (sc->lmc_txring)); + + lmc_trace(sc->lmc_device, "lmc_softreset out"); +} + +void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in"); + sc->lmc_gpio_io &= ~bits; + LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io)); + lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out"); +} + +void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in"); + sc->lmc_gpio_io |= bits; + LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io)); + lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out"); +} + +void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_led_on in"); + if((~sc->lmc_miireg16) & led){ /* Already on! */ + lmc_trace(sc->lmc_device, "lmc_led_on aon out"); + return; + } + + sc->lmc_miireg16 &= ~led; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + lmc_trace(sc->lmc_device, "lmc_led_on out"); +} + +void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_led_off in"); + if(sc->lmc_miireg16 & led){ /* Already set don't do anything */ + lmc_trace(sc->lmc_device, "lmc_led_off aoff out"); + return; + } + + sc->lmc_miireg16 |= led; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + lmc_trace(sc->lmc_device, "lmc_led_off out"); +} + +static void lmc_reset(lmc_softc_t * const sc) /*fold00*/ +{ + lmc_trace(sc->lmc_device, "lmc_reset in"); + sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET; + lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16); + + /* + * make some of the GPIO pins be outputs + */ + lmc_gpio_mkoutput(sc, LMC_GEP_RESET); + + /* + * RESET low to force state reset. This also forces + * the transmitter clock to be internal, but we expect to reset + * that later anyway. + */ + sc->lmc_gpio &= ~(LMC_GEP_RESET); + LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio); + + /* + * hold for more than 10 microseconds + */ + udelay(50); + + /* + * stop driving Xilinx-related signals + */ + lmc_gpio_mkinput(sc, LMC_GEP_RESET); + + /* + * Call media specific init routine + */ + sc->lmc_media->init(sc); + + sc->stats.resetCount++; + lmc_trace(sc->lmc_device, "lmc_reset out"); +} + +static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/ +{ + u_int32_t val; + lmc_trace(sc->lmc_device, "lmc_dec_reset in"); + + /* + * disable all interrupts + */ + sc->lmc_intrmask = 0; + LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask); + + /* + * Reset the chip with a software reset command. + * Wait 10 microseconds (actually 50 PCI cycles but at + * 33MHz that comes to two microseconds but wait a + * bit longer anyways) + */ + LMC_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET); + udelay(25); +#ifdef __sparc__ + sc->lmc_busmode = LMC_CSR_READ(sc, csr_busmode); + sc->lmc_busmode = 0x00100000; + sc->lmc_busmode &= ~TULIP_BUSMODE_SWRESET; + LMC_CSR_WRITE(sc, csr_busmode, sc->lmc_busmode); +#endif + sc->lmc_cmdmode = LMC_CSR_READ(sc, csr_command); + + /* + * We want: + * no ethernet address in frames we write + * disable padding (txdesc, padding disable) + * ignore runt frames (rdes0 bit 15) + * no receiver watchdog or transmitter jabber timer + * (csr15 bit 0,14 == 1) + * if using 16-bit CRC, turn off CRC (trans desc, crc disable) + */ + + sc->lmc_cmdmode |= ( TULIP_CMD_PROMISCUOUS + | TULIP_CMD_FULLDUPLEX + | TULIP_CMD_PASSBADPKT + | TULIP_CMD_NOHEARTBEAT + | TULIP_CMD_PORTSELECT + | TULIP_CMD_RECEIVEALL + | TULIP_CMD_MUSTBEONE + ); + sc->lmc_cmdmode &= ~( TULIP_CMD_OPERMODE + | TULIP_CMD_THRESHOLDCTL + | TULIP_CMD_STOREFWD + | TULIP_CMD_TXTHRSHLDCTL + ); + + LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode); + + /* + * disable receiver watchdog and transmit jabber + */ + val = LMC_CSR_READ(sc, csr_sia_general); + val |= (TULIP_WATCHDOG_TXDISABLE | TULIP_WATCHDOG_RXDISABLE); + LMC_CSR_WRITE(sc, csr_sia_general, val); + + lmc_trace(sc->lmc_device, "lmc_dec_reset out"); +} + +static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00*/ + size_t csr_size) +{ + lmc_trace(sc->lmc_device, "lmc_initcsrs in"); + sc->lmc_csrs.csr_busmode = csr_base + 0 * csr_size; + sc->lmc_csrs.csr_txpoll = csr_base + 1 * csr_size; + sc->lmc_csrs.csr_rxpoll = csr_base + 2 * csr_size; + sc->lmc_csrs.csr_rxlist = csr_base + 3 * csr_size; + sc->lmc_csrs.csr_txlist = csr_base + 4 * csr_size; + sc->lmc_csrs.csr_status = csr_base + 5 * csr_size; + sc->lmc_csrs.csr_command = csr_base + 6 * csr_size; + sc->lmc_csrs.csr_intr = csr_base + 7 * csr_size; + sc->lmc_csrs.csr_missed_frames = csr_base + 8 * csr_size; + sc->lmc_csrs.csr_9 = csr_base + 9 * csr_size; + sc->lmc_csrs.csr_10 = csr_base + 10 * csr_size; + sc->lmc_csrs.csr_11 = csr_base + 11 * csr_size; + sc->lmc_csrs.csr_12 = csr_base + 12 * csr_size; + sc->lmc_csrs.csr_13 = csr_base + 13 * csr_size; + sc->lmc_csrs.csr_14 = csr_base + 14 * csr_size; + sc->lmc_csrs.csr_15 = csr_base + 15 * csr_size; + lmc_trace(sc->lmc_device, "lmc_initcsrs out"); +} + +static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ + lmc_softc_t *sc; + u32 csr6; + unsigned long flags; + + lmc_trace(dev, "lmc_driver_timeout in"); + + sc = dev->priv; + + spin_lock_irqsave(&sc->lmc_lock, flags); + + printk("%s: Xmitter busy|\n", dev->name); + + sc->stats.tx_tbusy_calls++ ; + if (jiffies - dev->trans_start < TX_TIMEOUT) { + goto bug_out; + } + + /* + * Chip seems to have locked up + * Reset it + * This whips out all our decriptor + * table and starts from scartch + */ + + LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO, + LMC_CSR_READ (sc, csr_status), + sc->stats.tx_ProcTimeout); + + lmc_running_reset (dev); + + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, + lmc_mii_readreg (sc, 0, 16), + lmc_mii_readreg (sc, 0, 17)); + + /* restart the tx processes */ + csr6 = LMC_CSR_READ (sc, csr_command); + LMC_CSR_WRITE (sc, csr_command, csr6 | 0x0002); + LMC_CSR_WRITE (sc, csr_command, csr6 | 0x2002); + + /* immediate transmit */ + LMC_CSR_WRITE (sc, csr_txpoll, 0); + + sc->stats.tx_errors++; + sc->stats.tx_ProcTimeout++; /* -baz */ + + dev->trans_start = jiffies; + +bug_out: + + spin_unlock_irqrestore(&sc->lmc_lock, flags); + + lmc_trace(dev, "lmc_driver_timout out"); + + +} diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c new file mode 100644 index 00000000000..f55ce76b00e --- /dev/null +++ b/drivers/net/wan/lmc/lmc_media.c @@ -0,0 +1,1246 @@ +/* $Id: lmc_media.c,v 1.13 2000/04/11 05:25:26 asj Exp $ */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include /* Processor type for cache alignment. */ +#include +#include + +#include + +#include "lmc.h" +#include "lmc_var.h" +#include "lmc_ioctl.h" +#include "lmc_debug.h" + +#define CONFIG_LMC_IGNORE_HARDWARE_HANDSHAKE 1 + + /* + * Copyright (c) 1997-2000 LAN Media Corporation (LMC) + * All rights reserved. www.lanmedia.com + * + * This code is written by: + * Andrew Stanley-Jones (asj@cban.com) + * Rob Braun (bbraun@vix.com), + * Michael Graff (explorer@vix.com) and + * Matt Thomas (matt@3am-software.com). + * + * This software may be used and distributed according to the terms + * of the GNU General Public License version 2, incorporated herein by reference. + */ + +/* + * For lack of a better place, put the SSI cable stuff here. + */ +char *lmc_t1_cables[] = { + "V.10/RS423", "EIA530A", "reserved", "X.21", "V.35", + "EIA449/EIA530/V.36", "V.28/EIA232", "none", NULL +}; + +/* + * protocol independent method. + */ +static void lmc_set_protocol (lmc_softc_t * const, lmc_ctl_t *); + +/* + * media independent methods to check on media status, link, light LEDs, + * etc. + */ +static void lmc_ds3_init (lmc_softc_t * const); +static void lmc_ds3_default (lmc_softc_t * const); +static void lmc_ds3_set_status (lmc_softc_t * const, lmc_ctl_t *); +static void lmc_ds3_set_100ft (lmc_softc_t * const, int); +static int lmc_ds3_get_link_status (lmc_softc_t * const); +static void lmc_ds3_set_crc_length (lmc_softc_t * const, int); +static void lmc_ds3_set_scram (lmc_softc_t * const, int); +static void lmc_ds3_watchdog (lmc_softc_t * const); + +static void lmc_hssi_init (lmc_softc_t * const); +static void lmc_hssi_default (lmc_softc_t * const); +static void lmc_hssi_set_status (lmc_softc_t * const, lmc_ctl_t *); +static void lmc_hssi_set_clock (lmc_softc_t * const, int); +static int lmc_hssi_get_link_status (lmc_softc_t * const); +static void lmc_hssi_set_link_status (lmc_softc_t * const, int); +static void lmc_hssi_set_crc_length (lmc_softc_t * const, int); +static void lmc_hssi_watchdog (lmc_softc_t * const); + +static void lmc_ssi_init (lmc_softc_t * const); +static void lmc_ssi_default (lmc_softc_t * const); +static void lmc_ssi_set_status (lmc_softc_t * const, lmc_ctl_t *); +static void lmc_ssi_set_clock (lmc_softc_t * const, int); +static void lmc_ssi_set_speed (lmc_softc_t * const, lmc_ctl_t *); +static int lmc_ssi_get_link_status (lmc_softc_t * const); +static void lmc_ssi_set_link_status (lmc_softc_t * const, int); +static void lmc_ssi_set_crc_length (lmc_softc_t * const, int); +static void lmc_ssi_watchdog (lmc_softc_t * const); + +static void lmc_t1_init (lmc_softc_t * const); +static void lmc_t1_default (lmc_softc_t * const); +static void lmc_t1_set_status (lmc_softc_t * const, lmc_ctl_t *); +static int lmc_t1_get_link_status (lmc_softc_t * const); +static void lmc_t1_set_circuit_type (lmc_softc_t * const, int); +static void lmc_t1_set_crc_length (lmc_softc_t * const, int); +static void lmc_t1_set_clock (lmc_softc_t * const, int); +static void lmc_t1_watchdog (lmc_softc_t * const); + +static void lmc_dummy_set_1 (lmc_softc_t * const, int); +static void lmc_dummy_set2_1 (lmc_softc_t * const, lmc_ctl_t *); + +static inline void write_av9110_bit (lmc_softc_t *, int); +static void write_av9110 (lmc_softc_t *, u_int32_t, u_int32_t, u_int32_t, + u_int32_t, u_int32_t); + +lmc_media_t lmc_ds3_media = { + lmc_ds3_init, /* special media init stuff */ + lmc_ds3_default, /* reset to default state */ + lmc_ds3_set_status, /* reset status to state provided */ + lmc_dummy_set_1, /* set clock source */ + lmc_dummy_set2_1, /* set line speed */ + lmc_ds3_set_100ft, /* set cable length */ + lmc_ds3_set_scram, /* set scrambler */ + lmc_ds3_get_link_status, /* get link status */ + lmc_dummy_set_1, /* set link status */ + lmc_ds3_set_crc_length, /* set CRC length */ + lmc_dummy_set_1, /* set T1 or E1 circuit type */ + lmc_ds3_watchdog +}; + +lmc_media_t lmc_hssi_media = { + lmc_hssi_init, /* special media init stuff */ + lmc_hssi_default, /* reset to default state */ + lmc_hssi_set_status, /* reset status to state provided */ + lmc_hssi_set_clock, /* set clock source */ + lmc_dummy_set2_1, /* set line speed */ + lmc_dummy_set_1, /* set cable length */ + lmc_dummy_set_1, /* set scrambler */ + lmc_hssi_get_link_status, /* get link status */ + lmc_hssi_set_link_status, /* set link status */ + lmc_hssi_set_crc_length, /* set CRC length */ + lmc_dummy_set_1, /* set T1 or E1 circuit type */ + lmc_hssi_watchdog +}; + +lmc_media_t lmc_ssi_media = { lmc_ssi_init, /* special media init stuff */ + lmc_ssi_default, /* reset to default state */ + lmc_ssi_set_status, /* reset status to state provided */ + lmc_ssi_set_clock, /* set clock source */ + lmc_ssi_set_speed, /* set line speed */ + lmc_dummy_set_1, /* set cable length */ + lmc_dummy_set_1, /* set scrambler */ + lmc_ssi_get_link_status, /* get link status */ + lmc_ssi_set_link_status, /* set link status */ + lmc_ssi_set_crc_length, /* set CRC length */ + lmc_dummy_set_1, /* set T1 or E1 circuit type */ + lmc_ssi_watchdog +}; + +lmc_media_t lmc_t1_media = { + lmc_t1_init, /* special media init stuff */ + lmc_t1_default, /* reset to default state */ + lmc_t1_set_status, /* reset status to state provided */ + lmc_t1_set_clock, /* set clock source */ + lmc_dummy_set2_1, /* set line speed */ + lmc_dummy_set_1, /* set cable length */ + lmc_dummy_set_1, /* set scrambler */ + lmc_t1_get_link_status, /* get link status */ + lmc_dummy_set_1, /* set link status */ + lmc_t1_set_crc_length, /* set CRC length */ + lmc_t1_set_circuit_type, /* set T1 or E1 circuit type */ + lmc_t1_watchdog +}; + +static void +lmc_dummy_set_1 (lmc_softc_t * const sc, int a) +{ +} + +static void +lmc_dummy_set2_1 (lmc_softc_t * const sc, lmc_ctl_t * a) +{ +} + +/* + * HSSI methods + */ + +static void +lmc_hssi_init (lmc_softc_t * const sc) +{ + sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC5200; + + lmc_gpio_mkoutput (sc, LMC_GEP_HSSI_CLOCK); +} + +static void +lmc_hssi_default (lmc_softc_t * const sc) +{ + sc->lmc_miireg16 = LMC_MII16_LED_ALL; + + sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN); + sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT); + sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16); +} + +/* + * Given a user provided state, set ourselves up to match it. This will + * always reset the card if needed. + */ +static void +lmc_hssi_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl) +{ + if (ctl == NULL) + { + sc->lmc_media->set_clock_source (sc, sc->ictl.clock_source); + lmc_set_protocol (sc, NULL); + + return; + } + + /* + * check for change in clock source + */ + if (ctl->clock_source && !sc->ictl.clock_source) + { + sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_INT); + sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_INT; + } + else if (!ctl->clock_source && sc->ictl.clock_source) + { + sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT; + sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT); + } + + lmc_set_protocol (sc, ctl); +} + +/* + * 1 == internal, 0 == external + */ +static void +lmc_hssi_set_clock (lmc_softc_t * const sc, int ie) +{ + int old; + old = sc->ictl.clock_source; + if (ie == LMC_CTL_CLOCK_SOURCE_EXT) + { + sc->lmc_gpio |= LMC_GEP_HSSI_CLOCK; + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT; + if(old != ie) + printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS); + } + else + { + sc->lmc_gpio &= ~(LMC_GEP_HSSI_CLOCK); + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT; + if(old != ie) + printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS); + } +} + +/* + * return hardware link status. + * 0 == link is down, 1 == link is up. + */ +static int +lmc_hssi_get_link_status (lmc_softc_t * const sc) +{ + /* + * We're using the same code as SSI since + * they're practically the same + */ + return lmc_ssi_get_link_status(sc); +} + +static void +lmc_hssi_set_link_status (lmc_softc_t * const sc, int state) +{ + if (state == LMC_LINK_UP) + sc->lmc_miireg16 |= LMC_MII16_HSSI_TA; + else + sc->lmc_miireg16 &= ~LMC_MII16_HSSI_TA; + + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); +} + +/* + * 0 == 16bit, 1 == 32bit + */ +static void +lmc_hssi_set_crc_length (lmc_softc_t * const sc, int state) +{ + if (state == LMC_CTL_CRC_LENGTH_32) + { + /* 32 bit */ + sc->lmc_miireg16 |= LMC_MII16_HSSI_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32; + } + else + { + /* 16 bit */ + sc->lmc_miireg16 &= ~LMC_MII16_HSSI_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16; + } + + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); +} + +static void +lmc_hssi_watchdog (lmc_softc_t * const sc) +{ + /* HSSI is blank */ +} + +/* + * DS3 methods + */ + +/* + * Set cable length + */ +static void +lmc_ds3_set_100ft (lmc_softc_t * const sc, int ie) +{ + if (ie == LMC_CTL_CABLE_LENGTH_GT_100FT) + { + sc->lmc_miireg16 &= ~LMC_MII16_DS3_ZERO; + sc->ictl.cable_length = LMC_CTL_CABLE_LENGTH_GT_100FT; + } + else if (ie == LMC_CTL_CABLE_LENGTH_LT_100FT) + { + sc->lmc_miireg16 |= LMC_MII16_DS3_ZERO; + sc->ictl.cable_length = LMC_CTL_CABLE_LENGTH_LT_100FT; + } + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); +} + +static void +lmc_ds3_default (lmc_softc_t * const sc) +{ + sc->lmc_miireg16 = LMC_MII16_LED_ALL; + + sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN); + sc->lmc_media->set_cable_length (sc, LMC_CTL_CABLE_LENGTH_LT_100FT); + sc->lmc_media->set_scrambler (sc, LMC_CTL_OFF); + sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16); +} + +/* + * Given a user provided state, set ourselves up to match it. This will + * always reset the card if needed. + */ +static void +lmc_ds3_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl) +{ + if (ctl == NULL) + { + sc->lmc_media->set_cable_length (sc, sc->ictl.cable_length); + sc->lmc_media->set_scrambler (sc, sc->ictl.scrambler_onoff); + lmc_set_protocol (sc, NULL); + + return; + } + + /* + * check for change in cable length setting + */ + if (ctl->cable_length && !sc->ictl.cable_length) + lmc_ds3_set_100ft (sc, LMC_CTL_CABLE_LENGTH_GT_100FT); + else if (!ctl->cable_length && sc->ictl.cable_length) + lmc_ds3_set_100ft (sc, LMC_CTL_CABLE_LENGTH_LT_100FT); + + /* + * Check for change in scrambler setting (requires reset) + */ + if (ctl->scrambler_onoff && !sc->ictl.scrambler_onoff) + lmc_ds3_set_scram (sc, LMC_CTL_ON); + else if (!ctl->scrambler_onoff && sc->ictl.scrambler_onoff) + lmc_ds3_set_scram (sc, LMC_CTL_OFF); + + lmc_set_protocol (sc, ctl); +} + +static void +lmc_ds3_init (lmc_softc_t * const sc) +{ + int i; + + sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC5245; + + /* writes zeros everywhere */ + for (i = 0; i < 21; i++) + { + lmc_mii_writereg (sc, 0, 17, i); + lmc_mii_writereg (sc, 0, 18, 0); + } + + /* set some essential bits */ + lmc_mii_writereg (sc, 0, 17, 1); + lmc_mii_writereg (sc, 0, 18, 0x25); /* ser, xtx */ + + lmc_mii_writereg (sc, 0, 17, 5); + lmc_mii_writereg (sc, 0, 18, 0x80); /* emode */ + + lmc_mii_writereg (sc, 0, 17, 14); + lmc_mii_writereg (sc, 0, 18, 0x30); /* rcgen, tcgen */ + + /* clear counters and latched bits */ + for (i = 0; i < 21; i++) + { + lmc_mii_writereg (sc, 0, 17, i); + lmc_mii_readreg (sc, 0, 18); + } +} + +/* + * 1 == DS3 payload scrambled, 0 == not scrambled + */ +static void +lmc_ds3_set_scram (lmc_softc_t * const sc, int ie) +{ + if (ie == LMC_CTL_ON) + { + sc->lmc_miireg16 |= LMC_MII16_DS3_SCRAM; + sc->ictl.scrambler_onoff = LMC_CTL_ON; + } + else + { + sc->lmc_miireg16 &= ~LMC_MII16_DS3_SCRAM; + sc->ictl.scrambler_onoff = LMC_CTL_OFF; + } + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); +} + +/* + * return hardware link status. + * 0 == link is down, 1 == link is up. + */ +static int +lmc_ds3_get_link_status (lmc_softc_t * const sc) +{ + u_int16_t link_status, link_status_11; + int ret = 1; + + lmc_mii_writereg (sc, 0, 17, 7); + link_status = lmc_mii_readreg (sc, 0, 18); + + /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions + * led0 yellow = far-end adapter is in Red alarm condition + * led1 blue = received an Alarm Indication signal + * (upstream failure) + * led2 Green = power to adapter, Gate Array loaded & driver + * attached + * led3 red = Loss of Signal (LOS) or out of frame (OOF) + * conditions detected on T3 receive signal + */ + + lmc_led_on(sc, LMC_DS3_LED2); + + if ((link_status & LMC_FRAMER_REG0_DLOS) || + (link_status & LMC_FRAMER_REG0_OOFS)){ + ret = 0; + if(sc->last_led_err[3] != 1){ + u16 r1; + lmc_mii_writereg (sc, 0, 17, 01); /* Turn on Xbit error as our cisco does */ + r1 = lmc_mii_readreg (sc, 0, 18); + r1 &= 0xfe; + lmc_mii_writereg(sc, 0, 18, r1); + printk(KERN_WARNING "%s: Red Alarm - Loss of Signal or Loss of Framing\n", sc->name); + } + lmc_led_on(sc, LMC_DS3_LED3); /* turn on red LED */ + sc->last_led_err[3] = 1; + } + else { + lmc_led_off(sc, LMC_DS3_LED3); /* turn on red LED */ + if(sc->last_led_err[3] == 1){ + u16 r1; + lmc_mii_writereg (sc, 0, 17, 01); /* Turn off Xbit error */ + r1 = lmc_mii_readreg (sc, 0, 18); + r1 |= 0x01; + lmc_mii_writereg(sc, 0, 18, r1); + } + sc->last_led_err[3] = 0; + } + + lmc_mii_writereg(sc, 0, 17, 0x10); + link_status_11 = lmc_mii_readreg(sc, 0, 18); + if((link_status & LMC_FRAMER_REG0_AIS) || + (link_status_11 & LMC_FRAMER_REG10_XBIT)) { + ret = 0; + if(sc->last_led_err[0] != 1){ + printk(KERN_WARNING "%s: AIS Alarm or XBit Error\n", sc->name); + printk(KERN_WARNING "%s: Remote end has loss of signal or framing\n", sc->name); + } + lmc_led_on(sc, LMC_DS3_LED0); + sc->last_led_err[0] = 1; + } + else { + lmc_led_off(sc, LMC_DS3_LED0); + sc->last_led_err[0] = 0; + } + + lmc_mii_writereg (sc, 0, 17, 9); + link_status = lmc_mii_readreg (sc, 0, 18); + + if(link_status & LMC_FRAMER_REG9_RBLUE){ + ret = 0; + if(sc->last_led_err[1] != 1){ + printk(KERN_WARNING "%s: Blue Alarm - Receiving all 1's\n", sc->name); + } + lmc_led_on(sc, LMC_DS3_LED1); + sc->last_led_err[1] = 1; + } + else { + lmc_led_off(sc, LMC_DS3_LED1); + sc->last_led_err[1] = 0; + } + + return ret; +} + +/* + * 0 == 16bit, 1 == 32bit + */ +static void +lmc_ds3_set_crc_length (lmc_softc_t * const sc, int state) +{ + if (state == LMC_CTL_CRC_LENGTH_32) + { + /* 32 bit */ + sc->lmc_miireg16 |= LMC_MII16_DS3_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32; + } + else + { + /* 16 bit */ + sc->lmc_miireg16 &= ~LMC_MII16_DS3_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16; + } + + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); +} + +static void +lmc_ds3_watchdog (lmc_softc_t * const sc) +{ + +} + + +/* + * SSI methods + */ + +static void +lmc_ssi_init (lmc_softc_t * const sc) +{ + u_int16_t mii17; + int cable; + + sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000; + + mii17 = lmc_mii_readreg (sc, 0, 17); + + cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT; + sc->ictl.cable_type = cable; + + lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK); +} + +static void +lmc_ssi_default (lmc_softc_t * const sc) +{ + sc->lmc_miireg16 = LMC_MII16_LED_ALL; + + /* + * make TXCLOCK always be an output + */ + lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK); + + sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN); + sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT); + sc->lmc_media->set_speed (sc, NULL); + sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16); +} + +/* + * Given a user provided state, set ourselves up to match it. This will + * always reset the card if needed. + */ +static void +lmc_ssi_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl) +{ + if (ctl == NULL) + { + sc->lmc_media->set_clock_source (sc, sc->ictl.clock_source); + sc->lmc_media->set_speed (sc, &sc->ictl); + lmc_set_protocol (sc, NULL); + + return; + } + + /* + * check for change in clock source + */ + if (ctl->clock_source == LMC_CTL_CLOCK_SOURCE_INT + && sc->ictl.clock_source == LMC_CTL_CLOCK_SOURCE_EXT) + { + sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_INT); + sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_INT; + } + else if (ctl->clock_source == LMC_CTL_CLOCK_SOURCE_EXT + && sc->ictl.clock_source == LMC_CTL_CLOCK_SOURCE_INT) + { + sc->lmc_media->set_clock_source (sc, LMC_CTL_CLOCK_SOURCE_EXT); + sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT; + } + + if (ctl->clock_rate != sc->ictl.clock_rate) + sc->lmc_media->set_speed (sc, ctl); + + lmc_set_protocol (sc, ctl); +} + +/* + * 1 == internal, 0 == external + */ +static void +lmc_ssi_set_clock (lmc_softc_t * const sc, int ie) +{ + int old; + old = ie; + if (ie == LMC_CTL_CLOCK_SOURCE_EXT) + { + sc->lmc_gpio &= ~(LMC_GEP_SSI_TXCLOCK); + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT; + if(ie != old) + printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS); + } + else + { + sc->lmc_gpio |= LMC_GEP_SSI_TXCLOCK; + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT; + if(ie != old) + printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS); + } +} + +static void +lmc_ssi_set_speed (lmc_softc_t * const sc, lmc_ctl_t * ctl) +{ + lmc_ctl_t *ictl = &sc->ictl; + lmc_av9110_t *av; + + /* original settings for clock rate of: + * 100 Khz (8,25,0,0,2) were incorrect + * they should have been 80,125,1,3,3 + * There are 17 param combinations to produce this freq. + * For 1.5 Mhz use 120,100,1,1,2 (226 param. combinations) + */ + if (ctl == NULL) + { + av = &ictl->cardspec.ssi; + ictl->clock_rate = 1500000; + av->f = ictl->clock_rate; + av->n = 120; + av->m = 100; + av->v = 1; + av->x = 1; + av->r = 2; + + write_av9110 (sc, av->n, av->m, av->v, av->x, av->r); + return; + } + + av = &ctl->cardspec.ssi; + + if (av->f == 0) + return; + + ictl->clock_rate = av->f; /* really, this is the rate we are */ + ictl->cardspec.ssi = *av; + + write_av9110 (sc, av->n, av->m, av->v, av->x, av->r); +} + +/* + * return hardware link status. + * 0 == link is down, 1 == link is up. + */ +static int +lmc_ssi_get_link_status (lmc_softc_t * const sc) +{ + u_int16_t link_status; + u_int32_t ticks; + int ret = 1; + int hw_hdsk = 1; + + /* + * missing CTS? Hmm. If we require CTS on, we may never get the + * link to come up, so omit it in this test. + * + * Also, it seems that with a loopback cable, DCD isn't asserted, + * so just check for things like this: + * DSR _must_ be asserted. + * One of DCD or CTS must be asserted. + */ + + /* LMC 1000 (SSI) LED definitions + * led0 Green = power to adapter, Gate Array loaded & + * driver attached + * led1 Green = DSR and DTR and RTS and CTS are set + * led2 Green = Cable detected + * led3 red = No timing is available from the + * cable or the on-board frequency + * generator. + */ + + link_status = lmc_mii_readreg (sc, 0, 16); + + /* Is the transmit clock still available */ + ticks = LMC_CSR_READ (sc, csr_gp_timer); + ticks = 0x0000ffff - (ticks & 0x0000ffff); + + lmc_led_on (sc, LMC_MII16_LED0); + + /* ====== transmit clock determination ===== */ + if (sc->lmc_timing == LMC_CTL_CLOCK_SOURCE_INT) { + lmc_led_off(sc, LMC_MII16_LED3); + } + else if (ticks == 0 ) { /* no clock found ? */ + ret = 0; + if(sc->last_led_err[3] != 1){ + sc->stats.tx_lossOfClockCnt++; + printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name); + } + sc->last_led_err[3] = 1; + lmc_led_on (sc, LMC_MII16_LED3); /* turn ON red LED */ + } + else { + if(sc->last_led_err[3] == 1) + printk(KERN_WARNING "%s: Clock Returned\n", sc->name); + sc->last_led_err[3] = 0; + lmc_led_off (sc, LMC_MII16_LED3); /* turn OFF red LED */ + } + + if ((link_status & LMC_MII16_SSI_DSR) == 0) { /* Also HSSI CA */ + ret = 0; + hw_hdsk = 0; + } + +#ifdef CONFIG_LMC_IGNORE_HARDWARE_HANDSHAKE + if ((link_status & (LMC_MII16_SSI_CTS | LMC_MII16_SSI_DCD)) == 0){ + ret = 0; + hw_hdsk = 0; + } +#endif + + if(hw_hdsk == 0){ + if(sc->last_led_err[1] != 1) + printk(KERN_WARNING "%s: DSR not asserted\n", sc->name); + sc->last_led_err[1] = 1; + lmc_led_off(sc, LMC_MII16_LED1); + } + else { + if(sc->last_led_err[1] != 0) + printk(KERN_WARNING "%s: DSR now asserted\n", sc->name); + sc->last_led_err[1] = 0; + lmc_led_on(sc, LMC_MII16_LED1); + } + + if(ret == 1) { + lmc_led_on(sc, LMC_MII16_LED2); /* Over all good status? */ + } + + return ret; +} + +static void +lmc_ssi_set_link_status (lmc_softc_t * const sc, int state) +{ + if (state == LMC_LINK_UP) + { + sc->lmc_miireg16 |= (LMC_MII16_SSI_DTR | LMC_MII16_SSI_RTS); + printk (LMC_PRINTF_FMT ": asserting DTR and RTS\n", LMC_PRINTF_ARGS); + } + else + { + sc->lmc_miireg16 &= ~(LMC_MII16_SSI_DTR | LMC_MII16_SSI_RTS); + printk (LMC_PRINTF_FMT ": deasserting DTR and RTS\n", LMC_PRINTF_ARGS); + } + + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); + +} + +/* + * 0 == 16bit, 1 == 32bit + */ +static void +lmc_ssi_set_crc_length (lmc_softc_t * const sc, int state) +{ + if (state == LMC_CTL_CRC_LENGTH_32) + { + /* 32 bit */ + sc->lmc_miireg16 |= LMC_MII16_SSI_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32; + sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_4; + + } + else + { + /* 16 bit */ + sc->lmc_miireg16 &= ~LMC_MII16_SSI_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16; + sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_2; + } + + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); +} + +/* + * These are bits to program the ssi frequency generator + */ +static inline void +write_av9110_bit (lmc_softc_t * sc, int c) +{ + /* + * set the data bit as we need it. + */ + sc->lmc_gpio &= ~(LMC_GEP_CLK); + if (c & 0x01) + sc->lmc_gpio |= LMC_GEP_DATA; + else + sc->lmc_gpio &= ~(LMC_GEP_DATA); + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + + /* + * set the clock to high + */ + sc->lmc_gpio |= LMC_GEP_CLK; + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + + /* + * set the clock to low again. + */ + sc->lmc_gpio &= ~(LMC_GEP_CLK); + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); +} + +static void +write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v, + u_int32_t x, u_int32_t r) +{ + int i; + +#if 0 + printk (LMC_PRINTF_FMT ": speed %u, %d %d %d %d %d\n", + LMC_PRINTF_ARGS, sc->ictl.clock_rate, n, m, v, x, r); +#endif + + sc->lmc_gpio |= LMC_GEP_SSI_GENERATOR; + sc->lmc_gpio &= ~(LMC_GEP_DATA | LMC_GEP_CLK); + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + + /* + * Set the TXCLOCK, GENERATOR, SERIAL, and SERIALCLK + * as outputs. + */ + lmc_gpio_mkoutput (sc, (LMC_GEP_DATA | LMC_GEP_CLK + | LMC_GEP_SSI_GENERATOR)); + + sc->lmc_gpio &= ~(LMC_GEP_SSI_GENERATOR); + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + + /* + * a shifting we will go... + */ + for (i = 0; i < 7; i++) + write_av9110_bit (sc, n >> i); + for (i = 0; i < 7; i++) + write_av9110_bit (sc, m >> i); + for (i = 0; i < 1; i++) + write_av9110_bit (sc, v >> i); + for (i = 0; i < 2; i++) + write_av9110_bit (sc, x >> i); + for (i = 0; i < 2; i++) + write_av9110_bit (sc, r >> i); + for (i = 0; i < 5; i++) + write_av9110_bit (sc, 0x17 >> i); + + /* + * stop driving serial-related signals + */ + lmc_gpio_mkinput (sc, + (LMC_GEP_DATA | LMC_GEP_CLK + | LMC_GEP_SSI_GENERATOR)); +} + +static void +lmc_ssi_watchdog (lmc_softc_t * const sc) +{ + u_int16_t mii17; + struct ssicsr2 + { + unsigned short dtr:1, dsr:1, rts:1, cable:3, crc:1, led0:1, led1:1, + led2:1, led3:1, fifo:1, ll:1, rl:1, tm:1, loop:1; + }; + struct ssicsr2 *ssicsr; + mii17 = lmc_mii_readreg (sc, 0, 17); + ssicsr = (struct ssicsr2 *) &mii17; + if (ssicsr->cable == 7) + { + lmc_led_off (sc, LMC_MII16_LED2); + } + else + { + lmc_led_on (sc, LMC_MII16_LED2); + } + +} + +/* + * T1 methods + */ + +/* + * The framer regs are multiplexed through MII regs 17 & 18 + * write the register address to MII reg 17 and the * data to MII reg 18. */ +static void +lmc_t1_write (lmc_softc_t * const sc, int a, int d) +{ + lmc_mii_writereg (sc, 0, 17, a); + lmc_mii_writereg (sc, 0, 18, d); +} + +/* Save a warning +static int +lmc_t1_read (lmc_softc_t * const sc, int a) +{ + lmc_mii_writereg (sc, 0, 17, a); + return lmc_mii_readreg (sc, 0, 18); +} +*/ + + +static void +lmc_t1_init (lmc_softc_t * const sc) +{ + u_int16_t mii16; + int i; + + sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200; + mii16 = lmc_mii_readreg (sc, 0, 16); + + /* reset 8370 */ + mii16 &= ~LMC_MII16_T1_RST; + lmc_mii_writereg (sc, 0, 16, mii16 | LMC_MII16_T1_RST); + lmc_mii_writereg (sc, 0, 16, mii16); + + /* set T1 or E1 line. Uses sc->lmcmii16 reg in function so update it */ + sc->lmc_miireg16 = mii16; + lmc_t1_set_circuit_type(sc, LMC_CTL_CIRCUIT_TYPE_T1); + mii16 = sc->lmc_miireg16; + + lmc_t1_write (sc, 0x01, 0x1B); /* CR0 - primary control */ + lmc_t1_write (sc, 0x02, 0x42); /* JAT_CR - jitter atten config */ + lmc_t1_write (sc, 0x14, 0x00); /* LOOP - loopback config */ + lmc_t1_write (sc, 0x15, 0x00); /* DL3_TS - external data link timeslot */ + lmc_t1_write (sc, 0x18, 0xFF); /* PIO - programmable I/O */ + lmc_t1_write (sc, 0x19, 0x30); /* POE - programmable OE */ + lmc_t1_write (sc, 0x1A, 0x0F); /* CMUX - clock input mux */ + lmc_t1_write (sc, 0x20, 0x41); /* LIU_CR - RX LIU config */ + lmc_t1_write (sc, 0x22, 0x76); /* RLIU_CR - RX LIU config */ + lmc_t1_write (sc, 0x40, 0x03); /* RCR0 - RX config */ + lmc_t1_write (sc, 0x45, 0x00); /* RALM - RX alarm config */ + lmc_t1_write (sc, 0x46, 0x05); /* LATCH - RX alarm/err/cntr latch */ + lmc_t1_write (sc, 0x68, 0x40); /* TLIU_CR - TX LIU config */ + lmc_t1_write (sc, 0x70, 0x0D); /* TCR0 - TX framer config */ + lmc_t1_write (sc, 0x71, 0x05); /* TCR1 - TX config */ + lmc_t1_write (sc, 0x72, 0x0B); /* TFRM - TX frame format */ + lmc_t1_write (sc, 0x73, 0x00); /* TERROR - TX error insert */ + lmc_t1_write (sc, 0x74, 0x00); /* TMAN - TX manual Sa/FEBE config */ + lmc_t1_write (sc, 0x75, 0x00); /* TALM - TX alarm signal config */ + lmc_t1_write (sc, 0x76, 0x00); /* TPATT - TX test pattern config */ + lmc_t1_write (sc, 0x77, 0x00); /* TLB - TX inband loopback config */ + lmc_t1_write (sc, 0x90, 0x05); /* CLAD_CR - clock rate adapter config */ + lmc_t1_write (sc, 0x91, 0x05); /* CSEL - clad freq sel */ + lmc_t1_write (sc, 0xA6, 0x00); /* DL1_CTL - DL1 control */ + lmc_t1_write (sc, 0xB1, 0x00); /* DL2_CTL - DL2 control */ + lmc_t1_write (sc, 0xD0, 0x47); /* SBI_CR - sys bus iface config */ + lmc_t1_write (sc, 0xD1, 0x70); /* RSB_CR - RX sys bus config */ + lmc_t1_write (sc, 0xD4, 0x30); /* TSB_CR - TX sys bus config */ + for (i = 0; i < 32; i++) + { + lmc_t1_write (sc, 0x0E0 + i, 0x00); /* SBCn - sys bus per-channel ctl */ + lmc_t1_write (sc, 0x100 + i, 0x00); /* TPCn - TX per-channel ctl */ + lmc_t1_write (sc, 0x180 + i, 0x00); /* RPCn - RX per-channel ctl */ + } + for (i = 1; i < 25; i++) + { + lmc_t1_write (sc, 0x0E0 + i, 0x0D); /* SBCn - sys bus per-channel ctl */ + } + + mii16 |= LMC_MII16_T1_XOE; + lmc_mii_writereg (sc, 0, 16, mii16); + sc->lmc_miireg16 = mii16; +} + +static void +lmc_t1_default (lmc_softc_t * const sc) +{ + sc->lmc_miireg16 = LMC_MII16_LED_ALL; + sc->lmc_media->set_link_status (sc, LMC_LINK_DOWN); + sc->lmc_media->set_circuit_type (sc, LMC_CTL_CIRCUIT_TYPE_T1); + sc->lmc_media->set_crc_length (sc, LMC_CTL_CRC_LENGTH_16); + /* Right now we can only clock from out internal source */ + sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT; +} +/* * Given a user provided state, set ourselves up to match it. This will * always reset the card if needed. + */ +static void +lmc_t1_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl) +{ + if (ctl == NULL) + { + sc->lmc_media->set_circuit_type (sc, sc->ictl.circuit_type); + lmc_set_protocol (sc, NULL); + + return; + } + /* + * check for change in circuit type */ + if (ctl->circuit_type == LMC_CTL_CIRCUIT_TYPE_T1 + && sc->ictl.circuit_type == + LMC_CTL_CIRCUIT_TYPE_E1) sc->lmc_media->set_circuit_type (sc, + LMC_CTL_CIRCUIT_TYPE_E1); + else if (ctl->circuit_type == LMC_CTL_CIRCUIT_TYPE_E1 + && sc->ictl.circuit_type == LMC_CTL_CIRCUIT_TYPE_T1) + sc->lmc_media->set_circuit_type (sc, LMC_CTL_CIRCUIT_TYPE_T1); + lmc_set_protocol (sc, ctl); +} +/* + * return hardware link status. + * 0 == link is down, 1 == link is up. + */ static int +lmc_t1_get_link_status (lmc_softc_t * const sc) +{ + u_int16_t link_status; + int ret = 1; + + /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions + * led0 yellow = far-end adapter is in Red alarm condition + * led1 blue = received an Alarm Indication signal + * (upstream failure) + * led2 Green = power to adapter, Gate Array loaded & driver + * attached + * led3 red = Loss of Signal (LOS) or out of frame (OOF) + * conditions detected on T3 receive signal + */ + lmc_trace(sc->lmc_device, "lmc_t1_get_link_status in"); + lmc_led_on(sc, LMC_DS3_LED2); + + lmc_mii_writereg (sc, 0, 17, T1FRAMER_ALARM1_STATUS); + link_status = lmc_mii_readreg (sc, 0, 18); + + + if (link_status & T1F_RAIS) { /* turn on blue LED */ + ret = 0; + if(sc->last_led_err[1] != 1){ + printk(KERN_WARNING "%s: Receive AIS/Blue Alarm. Far end in RED alarm\n", sc->name); + } + lmc_led_on(sc, LMC_DS3_LED1); + sc->last_led_err[1] = 1; + } + else { + if(sc->last_led_err[1] != 0){ + printk(KERN_WARNING "%s: End AIS/Blue Alarm\n", sc->name); + } + lmc_led_off (sc, LMC_DS3_LED1); + sc->last_led_err[1] = 0; + } + + /* + * Yellow Alarm is nasty evil stuff, looks at data patterns + * inside the channel and confuses it with HDLC framing + * ignore all yellow alarms. + * + * Do listen to MultiFrame Yellow alarm which while implemented + * different ways isn't in the channel and hence somewhat + * more reliable + */ + + if (link_status & T1F_RMYEL) { + ret = 0; + if(sc->last_led_err[0] != 1){ + printk(KERN_WARNING "%s: Receive Yellow AIS Alarm\n", sc->name); + } + lmc_led_on(sc, LMC_DS3_LED0); + sc->last_led_err[0] = 1; + } + else { + if(sc->last_led_err[0] != 0){ + printk(KERN_WARNING "%s: End of Yellow AIS Alarm\n", sc->name); + } + lmc_led_off(sc, LMC_DS3_LED0); + sc->last_led_err[0] = 0; + } + + /* + * Loss of signal and los of frame + * Use the green bit to identify which one lit the led + */ + if(link_status & T1F_RLOF){ + ret = 0; + if(sc->last_led_err[3] != 1){ + printk(KERN_WARNING "%s: Local Red Alarm: Loss of Framing\n", sc->name); + } + lmc_led_on(sc, LMC_DS3_LED3); + sc->last_led_err[3] = 1; + + } + else { + if(sc->last_led_err[3] != 0){ + printk(KERN_WARNING "%s: End Red Alarm (LOF)\n", sc->name); + } + if( ! (link_status & T1F_RLOS)) + lmc_led_off(sc, LMC_DS3_LED3); + sc->last_led_err[3] = 0; + } + + if(link_status & T1F_RLOS){ + ret = 0; + if(sc->last_led_err[2] != 1){ + printk(KERN_WARNING "%s: Local Red Alarm: Loss of Signal\n", sc->name); + } + lmc_led_on(sc, LMC_DS3_LED3); + sc->last_led_err[2] = 1; + + } + else { + if(sc->last_led_err[2] != 0){ + printk(KERN_WARNING "%s: End Red Alarm (LOS)\n", sc->name); + } + if( ! (link_status & T1F_RLOF)) + lmc_led_off(sc, LMC_DS3_LED3); + sc->last_led_err[2] = 0; + } + + sc->lmc_xinfo.t1_alarm1_status = link_status; + + lmc_mii_writereg (sc, 0, 17, T1FRAMER_ALARM2_STATUS); + sc->lmc_xinfo.t1_alarm2_status = lmc_mii_readreg (sc, 0, 18); + + + lmc_trace(sc->lmc_device, "lmc_t1_get_link_status out"); + + return ret; +} + +/* + * 1 == T1 Circuit Type , 0 == E1 Circuit Type + */ +static void +lmc_t1_set_circuit_type (lmc_softc_t * const sc, int ie) +{ + if (ie == LMC_CTL_CIRCUIT_TYPE_T1) { + sc->lmc_miireg16 |= LMC_MII16_T1_Z; + sc->ictl.circuit_type = LMC_CTL_CIRCUIT_TYPE_T1; + printk(KERN_INFO "%s: In T1 Mode\n", sc->name); + } + else { + sc->lmc_miireg16 &= ~LMC_MII16_T1_Z; + sc->ictl.circuit_type = LMC_CTL_CIRCUIT_TYPE_E1; + printk(KERN_INFO "%s: In E1 Mode\n", sc->name); + } + + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); + +} + +/* + * 0 == 16bit, 1 == 32bit */ +static void +lmc_t1_set_crc_length (lmc_softc_t * const sc, int state) +{ + if (state == LMC_CTL_CRC_LENGTH_32) + { + /* 32 bit */ + sc->lmc_miireg16 |= LMC_MII16_T1_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_32; + sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_4; + + } + else + { + /* 16 bit */ sc->lmc_miireg16 &= ~LMC_MII16_T1_CRC; + sc->ictl.crc_length = LMC_CTL_CRC_LENGTH_16; + sc->lmc_crcSize = LMC_CTL_CRC_BYTESIZE_2; + + } + + lmc_mii_writereg (sc, 0, 16, sc->lmc_miireg16); +} + +/* + * 1 == internal, 0 == external + */ +static void +lmc_t1_set_clock (lmc_softc_t * const sc, int ie) +{ + int old; + old = ie; + if (ie == LMC_CTL_CLOCK_SOURCE_EXT) + { + sc->lmc_gpio &= ~(LMC_GEP_SSI_TXCLOCK); + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_EXT; + if(old != ie) + printk (LMC_PRINTF_FMT ": clock external\n", LMC_PRINTF_ARGS); + } + else + { + sc->lmc_gpio |= LMC_GEP_SSI_TXCLOCK; + LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); + sc->ictl.clock_source = LMC_CTL_CLOCK_SOURCE_INT; + if(old != ie) + printk (LMC_PRINTF_FMT ": clock internal\n", LMC_PRINTF_ARGS); + } +} + +static void +lmc_t1_watchdog (lmc_softc_t * const sc) +{ +} + +static void +lmc_set_protocol (lmc_softc_t * const sc, lmc_ctl_t * ctl) +{ + if (ctl == 0) + { + sc->ictl.keepalive_onoff = LMC_CTL_ON; + + return; + } +} diff --git a/drivers/net/wan/lmc/lmc_media.h b/drivers/net/wan/lmc/lmc_media.h new file mode 100644 index 00000000000..ddcc0040356 --- /dev/null +++ b/drivers/net/wan/lmc/lmc_media.h @@ -0,0 +1,65 @@ +#ifndef _LMC_MEDIA_H_ +#define _LMC_MEDIA_H_ + +lmc_media_t lmc_ds3_media = { + lmc_ds3_init, /* special media init stuff */ + lmc_ds3_default, /* reset to default state */ + lmc_ds3_set_status, /* reset status to state provided */ + lmc_dummy_set_1, /* set clock source */ + lmc_dummy_set2_1, /* set line speed */ + lmc_ds3_set_100ft, /* set cable length */ + lmc_ds3_set_scram, /* set scrambler */ + lmc_ds3_get_link_status, /* get link status */ + lmc_dummy_set_1, /* set link status */ + lmc_ds3_set_crc_length, /* set CRC length */ + lmc_dummy_set_1, /* set T1 or E1 circuit type */ + lmc_ds3_watchdog +}; + +lmc_media_t lmc_hssi_media = { + lmc_hssi_init, /* special media init stuff */ + lmc_hssi_default, /* reset to default state */ + lmc_hssi_set_status, /* reset status to state provided */ + lmc_hssi_set_clock, /* set clock source */ + lmc_dummy_set2_1, /* set line speed */ + lmc_dummy_set_1, /* set cable length */ + lmc_dummy_set_1, /* set scrambler */ + lmc_hssi_get_link_status, /* get link status */ + lmc_hssi_set_link_status, /* set link status */ + lmc_hssi_set_crc_length, /* set CRC length */ + lmc_dummy_set_1, /* set T1 or E1 circuit type */ + lmc_hssi_watchdog +}; + +lmc_media_t lmc_ssi_media = { lmc_ssi_init, /* special media init stuff */ + lmc_ssi_default, /* reset to default state */ + lmc_ssi_set_status, /* reset status to state provided */ + lmc_ssi_set_clock, /* set clock source */ + lmc_ssi_set_speed, /* set line speed */ + lmc_dummy_set_1, /* set cable length */ + lmc_dummy_set_1, /* set scrambler */ + lmc_ssi_get_link_status, /* get link status */ + lmc_ssi_set_link_status, /* set link status */ + lmc_ssi_set_crc_length, /* set CRC length */ + lmc_dummy_set_1, /* set T1 or E1 circuit type */ + lmc_ssi_watchdog +}; + +lmc_media_t lmc_t1_media = { + lmc_t1_init, /* special media init stuff */ + lmc_t1_default, /* reset to default state */ + lmc_t1_set_status, /* reset status to state provided */ + lmc_t1_set_clock, /* set clock source */ + lmc_dummy_set2_1, /* set line speed */ + lmc_dummy_set_1, /* set cable length */ + lmc_dummy_set_1, /* set scrambler */ + lmc_t1_get_link_status, /* get link status */ + lmc_dummy_set_1, /* set link status */ + lmc_t1_set_crc_length, /* set CRC length */ + lmc_t1_set_circuit_type, /* set T1 or E1 circuit type */ + lmc_t1_watchdog +}; + + +#endif + diff --git a/drivers/net/wan/lmc/lmc_prot.h b/drivers/net/wan/lmc/lmc_prot.h new file mode 100644 index 00000000000..f3b1df9e2cd --- /dev/null +++ b/drivers/net/wan/lmc/lmc_prot.h @@ -0,0 +1,15 @@ +#ifndef _LMC_PROTO_H_ +#define _LMC_PROTO_H_ + +void lmc_proto_init(lmc_softc_t * const) +void lmc_proto_attach(lmc_softc_t *sc const) +void lmc_proto_detach(lmc_softc *sc const) +void lmc_proto_reopen(lmc_softc_t *sc const) +int lmc_proto_ioctl(lmc_softc_t *sc const, struct ifreq *ifr, int cmd) +void lmc_proto_open(lmc_softc_t *sc const) +void lmc_proto_close(lmc_softc_t *sc const) +unsigned short lmc_proto_type(lmc_softc_t *sc const, struct skbuff *skb) + + +#endif + diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c new file mode 100644 index 00000000000..74876c0073e --- /dev/null +++ b/drivers/net/wan/lmc/lmc_proto.c @@ -0,0 +1,249 @@ + /* + * Copyright (c) 1997-2000 LAN Media Corporation (LMC) + * All rights reserved. www.lanmedia.com + * + * This code is written by: + * Andrew Stanley-Jones (asj@cban.com) + * Rob Braun (bbraun@vix.com), + * Michael Graff (explorer@vix.com) and + * Matt Thomas (matt@3am-software.com). + * + * With Help By: + * David Boggs + * Ron Crane + * Allan Cox + * + * This software may be used and distributed according to the terms + * of the GNU General Public License version 2, incorporated herein by reference. + * + * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include /* Processor type for cache alignment. */ +#include +#include +#include + +#include "lmc.h" +#include "lmc_var.h" +#include "lmc_debug.h" +#include "lmc_ioctl.h" +#include "lmc_proto.h" + +/* + * The compile-time variable SPPPSTUP causes the module to be + * compiled without referencing any of the sync ppp routines. + */ +#ifdef SPPPSTUB +#define SPPP_detach(d) (void)0 +#define SPPP_open(d) 0 +#define SPPP_reopen(d) (void)0 +#define SPPP_close(d) (void)0 +#define SPPP_attach(d) (void)0 +#define SPPP_do_ioctl(d,i,c) -EOPNOTSUPP +#else +#define SPPP_attach(x) sppp_attach((x)->pd) +#define SPPP_detach(x) sppp_detach((x)->pd->dev) +#define SPPP_open(x) sppp_open((x)->pd->dev) +#define SPPP_reopen(x) sppp_reopen((x)->pd->dev) +#define SPPP_close(x) sppp_close((x)->pd->dev) +#define SPPP_do_ioctl(x, y, z) sppp_do_ioctl((x)->pd->dev, (y), (z)) +#endif + +// init +void lmc_proto_init(lmc_softc_t *sc) /*FOLD00*/ +{ + lmc_trace(sc->lmc_device, "lmc_proto_init in"); + switch(sc->if_type){ + case LMC_PPP: + sc->pd = kmalloc(sizeof(struct ppp_device), GFP_KERNEL); + if (!sc->pd) { + printk("lmc_proto_init(): kmalloc failure!\n"); + return; + } + sc->pd->dev = sc->lmc_device; + sc->if_ptr = sc->pd; + break; + case LMC_RAW: + break; + default: + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_init out"); +} + +// attach +void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ +{ + lmc_trace(sc->lmc_device, "lmc_proto_attach in"); + switch(sc->if_type){ + case LMC_PPP: + { + struct net_device *dev = sc->lmc_device; + SPPP_attach(sc); + dev->do_ioctl = lmc_ioctl; + } + break; + case LMC_NET: + { + struct net_device *dev = sc->lmc_device; + /* + * They set a few basics because they don't use sync_ppp + */ + dev->flags |= IFF_POINTOPOINT; + dev->hard_header = NULL; + dev->hard_header_len = 0; + dev->addr_len = 0; + } + case LMC_RAW: /* Setup the task queue, maybe we should notify someone? */ + { + } + default: + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_attach out"); +} + +// detach +void lmc_proto_detach(lmc_softc_t *sc) /*FOLD00*/ +{ + switch(sc->if_type){ + case LMC_PPP: + SPPP_detach(sc); + break; + case LMC_RAW: /* Tell someone we're detaching? */ + break; + default: + break; + } + +} + +// reopen +void lmc_proto_reopen(lmc_softc_t *sc) /*FOLD00*/ +{ + lmc_trace(sc->lmc_device, "lmc_proto_reopen in"); + switch(sc->if_type){ + case LMC_PPP: + SPPP_reopen(sc); + break; + case LMC_RAW: /* Reset the interface after being down, prerape to receive packets again */ + break; + default: + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_reopen out"); +} + + +// ioctl +int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) /*FOLD00*/ +{ + lmc_trace(sc->lmc_device, "lmc_proto_ioctl out"); + switch(sc->if_type){ + case LMC_PPP: + return SPPP_do_ioctl (sc, ifr, cmd); + break; + default: + return -EOPNOTSUPP; + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_ioctl out"); +} + +// open +void lmc_proto_open(lmc_softc_t *sc) /*FOLD00*/ +{ + int ret; + + lmc_trace(sc->lmc_device, "lmc_proto_open in"); + switch(sc->if_type){ + case LMC_PPP: + ret = SPPP_open(sc); + if(ret < 0) + printk("%s: syncPPP open failed: %d\n", sc->name, ret); + break; + case LMC_RAW: /* We're about to start getting packets! */ + break; + default: + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_open out"); +} + +// close + +void lmc_proto_close(lmc_softc_t *sc) /*FOLD00*/ +{ + lmc_trace(sc->lmc_device, "lmc_proto_close in"); + switch(sc->if_type){ + case LMC_PPP: + SPPP_close(sc); + break; + case LMC_RAW: /* Interface going down */ + break; + default: + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_close out"); +} + +unsigned short lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ +{ + lmc_trace(sc->lmc_device, "lmc_proto_type in"); + switch(sc->if_type){ + case LMC_PPP: + return htons(ETH_P_WAN_PPP); + break; + case LMC_NET: + return htons(ETH_P_802_2); + break; + case LMC_RAW: /* Packet type for skbuff kind of useless */ + return htons(ETH_P_802_2); + break; + default: + printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name); + return htons(ETH_P_802_2); + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_tye out"); + +} + +void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ +{ + lmc_trace(sc->lmc_device, "lmc_proto_netif in"); + switch(sc->if_type){ + case LMC_PPP: + case LMC_NET: + default: + skb->dev->last_rx = jiffies; + netif_rx(skb); + break; + case LMC_RAW: + break; + } + lmc_trace(sc->lmc_device, "lmc_proto_netif out"); +} + diff --git a/drivers/net/wan/lmc/lmc_proto.h b/drivers/net/wan/lmc/lmc_proto.h new file mode 100644 index 00000000000..080a5577334 --- /dev/null +++ b/drivers/net/wan/lmc/lmc_proto.h @@ -0,0 +1,16 @@ +#ifndef _LMC_PROTO_H_ +#define _LMC_PROTO_H_ + +void lmc_proto_init(lmc_softc_t *sc); +void lmc_proto_attach(lmc_softc_t *sc); +void lmc_proto_detach(lmc_softc_t *sc); +void lmc_proto_reopen(lmc_softc_t *sc); +int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd); +void lmc_proto_open(lmc_softc_t *sc); +void lmc_proto_close(lmc_softc_t *sc); +unsigned short lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb); +void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb); +int lmc_skb_rawpackets(char *buf, char **start, off_t offset, int len, int unused); + +#endif + diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h new file mode 100644 index 00000000000..6d003a39bfa --- /dev/null +++ b/drivers/net/wan/lmc/lmc_var.h @@ -0,0 +1,570 @@ +#ifndef _LMC_VAR_H_ +#define _LMC_VAR_H_ + +/* $Id: lmc_var.h,v 1.17 2000/04/06 12:16:47 asj Exp $ */ + + /* + * Copyright (c) 1997-2000 LAN Media Corporation (LMC) + * All rights reserved. www.lanmedia.com + * + * This code is written by: + * Andrew Stanley-Jones (asj@cban.com) + * Rob Braun (bbraun@vix.com), + * Michael Graff (explorer@vix.com) and + * Matt Thomas (matt@3am-software.com). + * + * This software may be used and distributed according to the terms + * of the GNU General Public License version 2, incorporated herein by reference. + */ + +#include + +#ifndef __KERNEL__ +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +#endif + +/* + * basic definitions used in lmc include files + */ + +typedef struct lmc___softc lmc_softc_t; +typedef struct lmc___media lmc_media_t; +typedef struct lmc___ctl lmc_ctl_t; + +#define lmc_csrptr_t unsigned long +#define u_int16_t u16 +#define u_int8_t u8 +#define tulip_uint32_t u32 + +#define LMC_REG_RANGE 0x80 + +#define LMC_PRINTF_FMT "%s" +#define LMC_PRINTF_ARGS (sc->lmc_device->name) + +#define TX_TIMEOUT (2*HZ) + +#define LMC_TXDESCS 32 +#define LMC_RXDESCS 32 + +#define LMC_LINK_UP 1 +#define LMC_LINK_DOWN 0 + +/* These macros for generic read and write to and from the dec chip */ +#define LMC_CSR_READ(sc, csr) \ + inl((sc)->lmc_csrs.csr) +#define LMC_CSR_WRITE(sc, reg, val) \ + outl((val), (sc)->lmc_csrs.reg) + +//#ifdef _LINUX_DELAY_H +// #define SLOW_DOWN_IO udelay(2); +// #undef __SLOW_DOWN_IO +// #define __SLOW_DOWN_IO udelay(2); +//#endif + +#define DELAY(n) SLOW_DOWN_IO + +#define lmc_delay() inl(sc->lmc_csrs.csr_9) + +/* This macro sync's up with the mii so that reads and writes can take place */ +#define LMC_MII_SYNC(sc) do {int n=32; while( n >= 0 ) { \ + LMC_CSR_WRITE((sc), csr_9, 0x20000); \ + lmc_delay(); \ + LMC_CSR_WRITE((sc), csr_9, 0x30000); \ + lmc_delay(); \ + n--; }} while(0) + +struct lmc_regfile_t { + lmc_csrptr_t csr_busmode; /* CSR0 */ + lmc_csrptr_t csr_txpoll; /* CSR1 */ + lmc_csrptr_t csr_rxpoll; /* CSR2 */ + lmc_csrptr_t csr_rxlist; /* CSR3 */ + lmc_csrptr_t csr_txlist; /* CSR4 */ + lmc_csrptr_t csr_status; /* CSR5 */ + lmc_csrptr_t csr_command; /* CSR6 */ + lmc_csrptr_t csr_intr; /* CSR7 */ + lmc_csrptr_t csr_missed_frames; /* CSR8 */ + lmc_csrptr_t csr_9; /* CSR9 */ + lmc_csrptr_t csr_10; /* CSR10 */ + lmc_csrptr_t csr_11; /* CSR11 */ + lmc_csrptr_t csr_12; /* CSR12 */ + lmc_csrptr_t csr_13; /* CSR13 */ + lmc_csrptr_t csr_14; /* CSR14 */ + lmc_csrptr_t csr_15; /* CSR15 */ +}; + +#define csr_enetrom csr_9 /* 21040 */ +#define csr_reserved csr_10 /* 21040 */ +#define csr_full_duplex csr_11 /* 21040 */ +#define csr_bootrom csr_10 /* 21041/21140A/?? */ +#define csr_gp csr_12 /* 21140* */ +#define csr_watchdog csr_15 /* 21140* */ +#define csr_gp_timer csr_11 /* 21041/21140* */ +#define csr_srom_mii csr_9 /* 21041/21140* */ +#define csr_sia_status csr_12 /* 2104x */ +#define csr_sia_connectivity csr_13 /* 2104x */ +#define csr_sia_tx_rx csr_14 /* 2104x */ +#define csr_sia_general csr_15 /* 2104x */ + +/* tulip length/control transmit descriptor definitions + * used to define bits in the second tulip_desc_t field (length) + * for the transmit descriptor -baz */ + +#define LMC_TDES_FIRST_BUFFER_SIZE ((u_int32_t)(0x000007FF)) +#define LMC_TDES_SECOND_BUFFER_SIZE ((u_int32_t)(0x003FF800)) +#define LMC_TDES_HASH_FILTERING ((u_int32_t)(0x00400000)) +#define LMC_TDES_DISABLE_PADDING ((u_int32_t)(0x00800000)) +#define LMC_TDES_SECOND_ADDR_CHAINED ((u_int32_t)(0x01000000)) +#define LMC_TDES_END_OF_RING ((u_int32_t)(0x02000000)) +#define LMC_TDES_ADD_CRC_DISABLE ((u_int32_t)(0x04000000)) +#define LMC_TDES_SETUP_PACKET ((u_int32_t)(0x08000000)) +#define LMC_TDES_INVERSE_FILTERING ((u_int32_t)(0x10000000)) +#define LMC_TDES_FIRST_SEGMENT ((u_int32_t)(0x20000000)) +#define LMC_TDES_LAST_SEGMENT ((u_int32_t)(0x40000000)) +#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u_int32_t)(0x80000000)) + +#define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER 11 +#define TDES_COLLISION_COUNT_BIT_NUMBER 3 + +/* Constants for the RCV descriptor RDES */ + +#define LMC_RDES_OVERFLOW ((u_int32_t)(0x00000001)) +#define LMC_RDES_CRC_ERROR ((u_int32_t)(0x00000002)) +#define LMC_RDES_DRIBBLING_BIT ((u_int32_t)(0x00000004)) +#define LMC_RDES_REPORT_ON_MII_ERR ((u_int32_t)(0x00000008)) +#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u_int32_t)(0x00000010)) +#define LMC_RDES_FRAME_TYPE ((u_int32_t)(0x00000020)) +#define LMC_RDES_COLLISION_SEEN ((u_int32_t)(0x00000040)) +#define LMC_RDES_FRAME_TOO_LONG ((u_int32_t)(0x00000080)) +#define LMC_RDES_LAST_DESCRIPTOR ((u_int32_t)(0x00000100)) +#define LMC_RDES_FIRST_DESCRIPTOR ((u_int32_t)(0x00000200)) +#define LMC_RDES_MULTICAST_FRAME ((u_int32_t)(0x00000400)) +#define LMC_RDES_RUNT_FRAME ((u_int32_t)(0x00000800)) +#define LMC_RDES_DATA_TYPE ((u_int32_t)(0x00003000)) +#define LMC_RDES_LENGTH_ERROR ((u_int32_t)(0x00004000)) +#define LMC_RDES_ERROR_SUMMARY ((u_int32_t)(0x00008000)) +#define LMC_RDES_FRAME_LENGTH ((u_int32_t)(0x3FFF0000)) +#define LMC_RDES_OWN_BIT ((u_int32_t)(0x80000000)) + +#define RDES_FRAME_LENGTH_BIT_NUMBER 16 + +#define LMC_RDES_ERROR_MASK ( (u_int32_t)( \ + LMC_RDES_OVERFLOW \ + | LMC_RDES_DRIBBLING_BIT \ + | LMC_RDES_REPORT_ON_MII_ERR \ + | LMC_RDES_COLLISION_SEEN ) ) + + +/* + * Ioctl info + */ + +typedef struct { + u_int32_t n; + u_int32_t m; + u_int32_t v; + u_int32_t x; + u_int32_t r; + u_int32_t f; + u_int32_t exact; +} lmc_av9110_t; + +/* + * Common structure passed to the ioctl code. + */ +struct lmc___ctl { + u_int32_t cardtype; + u_int32_t clock_source; /* HSSI, T1 */ + u_int32_t clock_rate; /* T1 */ + u_int32_t crc_length; + u_int32_t cable_length; /* DS3 */ + u_int32_t scrambler_onoff; /* DS3 */ + u_int32_t cable_type; /* T1 */ + u_int32_t keepalive_onoff; /* protocol */ + u_int32_t ticks; /* ticks/sec */ + union { + lmc_av9110_t ssi; + } cardspec; + u_int32_t circuit_type; /* T1 or E1 */ +}; + + +/* + * Carefull, look at the data sheet, there's more to this + * structure than meets the eye. It should probably be: + * + * struct tulip_desc_t { + * u8 own:1; + * u32 status:31; + * u32 control:10; + * u32 buffer1; + * u32 buffer2; + * }; + * You could also expand status control to provide more bit information + */ + +struct tulip_desc_t { + s32 status; + s32 length; + u32 buffer1; + u32 buffer2; +}; + +/* + * media independent methods to check on media status, link, light LEDs, + * etc. + */ +struct lmc___media { + void (* init)(lmc_softc_t * const); + void (* defaults)(lmc_softc_t * const); + void (* set_status)(lmc_softc_t * const, lmc_ctl_t *); + void (* set_clock_source)(lmc_softc_t * const, int); + void (* set_speed)(lmc_softc_t * const, lmc_ctl_t *); + void (* set_cable_length)(lmc_softc_t * const, int); + void (* set_scrambler)(lmc_softc_t * const, int); + int (* get_link_status)(lmc_softc_t * const); + void (* set_link_status)(lmc_softc_t * const, int); + void (* set_crc_length)(lmc_softc_t * const, int); + void (* set_circuit_type)(lmc_softc_t * const, int); + void (* watchdog)(lmc_softc_t * const); +}; + + +#define STATCHECK 0xBEEFCAFE + +/* Included in this structure are first + * - standard net_device_stats + * - some other counters used for debug and driver performance + * evaluation -baz + */ +struct lmc_statistics +{ + unsigned long rx_packets; /* total packets received */ + unsigned long tx_packets; /* total packets transmitted */ + unsigned long rx_bytes; + unsigned long tx_bytes; + + unsigned long rx_errors; /* bad packets received */ + unsigned long tx_errors; /* packet transmit problems */ + unsigned long rx_dropped; /* no space in linux buffers */ + unsigned long tx_dropped; /* no space available in linux */ + unsigned long multicast; /* multicast packets received */ + unsigned long collisions; + + /* detailed rx_errors: */ + unsigned long rx_length_errors; + unsigned long rx_over_errors; /* receiver ring buff overflow */ + unsigned long rx_crc_errors; /* recved pkt with crc error */ + unsigned long rx_frame_errors; /* recv'd frame alignment error */ + unsigned long rx_fifo_errors; /* recv'r fifo overrun */ + unsigned long rx_missed_errors; /* receiver missed packet */ + + /* detailed tx_errors */ + unsigned long tx_aborted_errors; + unsigned long tx_carrier_errors; + unsigned long tx_fifo_errors; + unsigned long tx_heartbeat_errors; + unsigned long tx_window_errors; + + /* for cslip etc */ + unsigned long rx_compressed; + unsigned long tx_compressed; + + /* ------------------------------------- + * Custom stats & counters follow -baz */ + u_int32_t version_size; + u_int32_t lmc_cardtype; + + u_int32_t tx_ProcTimeout; + u_int32_t tx_IntTimeout; + u_int32_t tx_NoCompleteCnt; + u_int32_t tx_MaxXmtsB4Int; + u_int32_t tx_TimeoutCnt; + u_int32_t tx_OutOfSyncPtr; + u_int32_t tx_tbusy0; + u_int32_t tx_tbusy1; + u_int32_t tx_tbusy_calls; + u_int32_t resetCount; + u_int32_t lmc_txfull; + u_int32_t tbusy; + u_int32_t dirtyTx; + u_int32_t lmc_next_tx; + u_int32_t otherTypeCnt; + u_int32_t lastType; + u_int32_t lastTypeOK; + u_int32_t txLoopCnt; + u_int32_t usedXmtDescripCnt; + u_int32_t txIndexCnt; + u_int32_t rxIntLoopCnt; + + u_int32_t rx_SmallPktCnt; + u_int32_t rx_BadPktSurgeCnt; + u_int32_t rx_BuffAllocErr; + u_int32_t tx_lossOfClockCnt; + + /* T1 error counters */ + u_int32_t framingBitErrorCount; + u_int32_t lineCodeViolationCount; + + u_int32_t lossOfFrameCount; + u_int32_t changeOfFrameAlignmentCount; + u_int32_t severelyErroredFrameCount; + + u_int32_t check; +}; + + +typedef struct lmc_xinfo { + u_int32_t Magic0; /* BEEFCAFE */ + + u_int32_t PciCardType; + u_int32_t PciSlotNumber; /* PCI slot number */ + + u_int16_t DriverMajorVersion; + u_int16_t DriverMinorVersion; + u_int16_t DriverSubVersion; + + u_int16_t XilinxRevisionNumber; + u_int16_t MaxFrameSize; + + u_int16_t t1_alarm1_status; + u_int16_t t1_alarm2_status; + + int link_status; + u_int32_t mii_reg16; + + u_int32_t Magic1; /* DEADBEEF */ +} LMC_XINFO; + + +/* + * forward decl + */ +struct lmc___softc { + void *if_ptr; /* General purpose pointer (used by SPPP) */ + char *name; + u8 board_idx; + struct lmc_statistics stats; + struct net_device *lmc_device; + + int hang, rxdesc, bad_packet, some_counter; + u_int32_t txgo; + struct lmc_regfile_t lmc_csrs; + volatile u_int32_t lmc_txtick; + volatile u_int32_t lmc_rxtick; + u_int32_t lmc_flags; + u_int32_t lmc_intrmask; /* our copy of csr_intr */ + u_int32_t lmc_cmdmode; /* our copy of csr_cmdmode */ + u_int32_t lmc_busmode; /* our copy of csr_busmode */ + u_int32_t lmc_gpio_io; /* state of in/out settings */ + u_int32_t lmc_gpio; /* state of outputs */ + struct sk_buff* lmc_txq[LMC_TXDESCS]; + struct sk_buff* lmc_rxq[LMC_RXDESCS]; + volatile + struct tulip_desc_t lmc_rxring[LMC_RXDESCS]; + volatile + struct tulip_desc_t lmc_txring[LMC_TXDESCS]; + unsigned int lmc_next_rx, lmc_next_tx; + volatile + unsigned int lmc_taint_tx, lmc_taint_rx; + int lmc_tx_start, lmc_txfull; + int lmc_txbusy; + u_int16_t lmc_miireg16; + int lmc_ok; + int last_link_status; + int lmc_cardtype; + u_int32_t last_frameerr; + lmc_media_t *lmc_media; + struct timer_list timer; + lmc_ctl_t ictl; + u_int32_t TxDescriptControlInit; + + int tx_TimeoutInd; /* additional driver state */ + int tx_TimeoutDisplay; + unsigned int lastlmc_taint_tx; + int lasttx_packets; + u_int32_t tx_clockState; + u_int32_t lmc_crcSize; + LMC_XINFO lmc_xinfo; + char lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */ + char lmc_timing; /* for HSSI and SSI */ + int got_irq; + + char last_led_err[4]; + + u32 last_int; + u32 num_int; + + spinlock_t lmc_lock; + u_int16_t if_type; /* PPP or NET */ + struct ppp_device *pd; + + /* Failure cases */ + u8 failed_ring; + u8 failed_recv_alloc; + + /* Structure check */ + u32 check; +}; + +#define LMC_PCI_TIME 1 +#define LMC_EXT_TIME 0 + +#define PKT_BUF_SZ 1542 /* was 1536 */ + +/* CSR5 settings */ +#define TIMER_INT 0x00000800 +#define TP_LINK_FAIL 0x00001000 +#define TP_LINK_PASS 0x00000010 +#define NORMAL_INT 0x00010000 +#define ABNORMAL_INT 0x00008000 +#define RX_JABBER_INT 0x00000200 +#define RX_DIED 0x00000100 +#define RX_NOBUFF 0x00000080 +#define RX_INT 0x00000040 +#define TX_FIFO_UNDER 0x00000020 +#define TX_JABBER 0x00000008 +#define TX_NOBUFF 0x00000004 +#define TX_DIED 0x00000002 +#define TX_INT 0x00000001 + +/* CSR6 settings */ +#define OPERATION_MODE 0x00000200 /* Full Duplex */ +#define PROMISC_MODE 0x00000040 /* Promiscuous Mode */ +#define RECIEVE_ALL 0x40000000 /* Recieve All */ +#define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames */ + +/* Dec control registers CSR6 as well */ +#define LMC_DEC_ST 0x00002000 +#define LMC_DEC_SR 0x00000002 + +/* CSR15 settings */ +#define RECV_WATCHDOG_DISABLE 0x00000010 +#define JABBER_DISABLE 0x00000001 + +/* More settings */ +/* + * aSR6 -- Command (Operation Mode) Register + */ +#define TULIP_CMD_RECEIVEALL 0x40000000L /* (RW) Receivel all frames? */ +#define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (21140) */ +#define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (21140) */ +#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Foward (21140) */ +#define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (21140) */ +#define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (21140) */ +#define TULIP_CMD_FULLDUPLEX 0x00000200L /* (RW) Full Duplex Mode */ +#define TULIP_CMD_OPERMODE 0x00000C00L /* (RW) Operating Mode */ +#define TULIP_CMD_PROMISCUOUS 0x00000041L /* (RW) Promiscuous Mode */ +#define TULIP_CMD_PASSBADPKT 0x00000008L /* (RW) Pass Bad Frames */ +#define TULIP_CMD_THRESHOLDCTL 0x0000C000L /* (RW) Threshold Control */ + +#define TULIP_GP_PINSET 0x00000100L +#define TULIP_BUSMODE_SWRESET 0x00000001L +#define TULIP_WATCHDOG_TXDISABLE 0x00000001L +#define TULIP_WATCHDOG_RXDISABLE 0x00000010L + +#define TULIP_STS_NORMALINTR 0x00010000L /* (RW) Normal Interrupt */ +#define TULIP_STS_ABNRMLINTR 0x00008000L /* (RW) Abnormal Interrupt */ +#define TULIP_STS_ERI 0x00004000L /* (RW) Early Receive Interrupt */ +#define TULIP_STS_SYSERROR 0x00002000L /* (RW) System Error */ +#define TULIP_STS_GTE 0x00000800L /* (RW) General Pupose Timer Exp */ +#define TULIP_STS_ETI 0x00000400L /* (RW) Early Transmit Interrupt */ +#define TULIP_STS_RXWT 0x00000200L /* (RW) Receiver Watchdog Timeout */ +#define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receiver Process Stopped */ +#define TULIP_STS_RXNOBUF 0x00000080L /* (RW) Receive Buf Unavail */ +#define TULIP_STS_RXINTR 0x00000040L /* (RW) Receive Interrupt */ +#define TULIP_STS_TXUNDERFLOW 0x00000020L /* (RW) Transmit Underflow */ +#define TULIP_STS_TXJABER 0x00000008L /* (RW) Jabber timeout */ +#define TULIP_STS_TXNOBUF 0x00000004L +#define TULIP_STS_TXSTOPPED 0x00000002L /* (RW) Transmit Process Stopped */ +#define TULIP_STS_TXINTR 0x00000001L /* (RW) Transmit Interrupt */ + +#define TULIP_STS_RXS_STOPPED 0x00000000L /* 000 - Stopped */ + +#define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receive Process Stopped */ +#define TULIP_STS_RXNOBUF 0x00000080L + +#define TULIP_CMD_TXRUN 0x00002000L /* (RW) Start/Stop Transmitter */ +#define TULIP_CMD_RXRUN 0x00000002L /* (RW) Start/Stop Receive Filtering */ +#define TULIP_DSTS_TxDEFERRED 0x00000001 /* Initially Deferred */ +#define TULIP_DSTS_OWNER 0x80000000 /* Owner (1 = 21040) */ +#define TULIP_DSTS_RxMIIERR 0x00000008 +#define LMC_DSTS_ERRSUM (TULIP_DSTS_RxMIIERR) + +#define TULIP_DEFAULT_INTR_MASK (TULIP_STS_NORMALINTR \ + | TULIP_STS_RXINTR \ + | TULIP_STS_TXINTR \ + | TULIP_STS_ABNRMLINTR \ + | TULIP_STS_SYSERROR \ + | TULIP_STS_TXSTOPPED \ + | TULIP_STS_TXUNDERFLOW\ + | TULIP_STS_RXSTOPPED ) + +#define DESC_OWNED_BY_SYSTEM ((u_int32_t)(0x00000000)) +#define DESC_OWNED_BY_DC21X4 ((u_int32_t)(0x80000000)) + +#ifndef TULIP_CMD_RECEIVEALL +#define TULIP_CMD_RECEIVEALL 0x40000000L +#endif + +/* Adapter module number */ +#define LMC_ADAP_HSSI 2 +#define LMC_ADAP_DS3 3 +#define LMC_ADAP_SSI 4 +#define LMC_ADAP_T1 5 + +#define HDLC_HDR_LEN 4 +#define HDLC_ADDR_LEN 1 +#define HDLC_SLARP 0x8035 +#define LMC_MTU 1500 +#define SLARP_LINECHECK 2 + +#define LMC_CRC_LEN_16 2 /* 16-bit CRC */ +#define LMC_CRC_LEN_32 4 + +#ifdef LMC_HDLC +/* definition of an hdlc header. */ +struct hdlc_hdr +{ + u8 address; + u8 control; + u16 type; +}; + +/* definition of a slarp header. */ +struct slarp +{ + long code; + union sl + { + struct + { + ulong address; + ulong mask; + ushort unused; + } add; + struct + { + ulong mysequence; + ulong yoursequence; + ushort reliability; + ulong time; + } chk; + } t; +}; +#endif /* LMC_HDLC */ + + +#endif /* _LMC_VAR_H_ */ -- cgit v1.2.3