From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/wireless/airo_cs.c | 622 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 622 insertions(+) create mode 100644 drivers/net/wireless/airo_cs.c (limited to 'drivers/net/wireless/airo_cs.c') diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c new file mode 100644 index 00000000000..fbf53af6cda --- /dev/null +++ b/drivers/net/wireless/airo_cs.c @@ -0,0 +1,622 @@ +/*====================================================================== + + Aironet driver for 4500 and 4800 series cards + + This code is released under both the GPL version 2 and BSD licenses. + Either license may be used. The respective licenses are found at + the end of this file. + + This code was developed by Benjamin Reed + including portions of which come from the Aironet PC4500 + Developer's Reference Manual and used with permission. Copyright + (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use + code in the Developer's manual was granted for this driver by + Aironet. + + In addition this module was derived from dummy_cs. + The initial developer of dummy_cs is David A. Hinds + . Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + +======================================================================*/ + +#include +#ifdef __IN_PCMCIA_PACKAGE__ +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +/* + All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If + you do not define PCMCIA_DEBUG at all, all the debug code will be + left out. If you compile with PCMCIA_DEBUG=0, the debug code will + be present but disabled -- but it can then be enabled for specific + modules at load time with a 'pc_debug=#' option to insmod. +*/ +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0); +static char *version = "$Revision: 1.2 $"; +#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); +#else +#define DEBUG(n, args...) +#endif + +/*====================================================================*/ + +MODULE_AUTHOR("Benjamin Reed"); +MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \ + cards. This is the module that links the PCMCIA card \ + with the airo module."); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); + +/*====================================================================*/ + +/* + The event() function is this driver's Card Services event handler. + It will be called by Card Services when an appropriate card status + event is received. The config() and release() entry points are + used to configure or release a socket, in response to card + insertion and ejection events. They are invoked from the airo_cs + event handler. +*/ + +struct net_device *init_airo_card( int, int, int, struct device * ); +void stop_airo_card( struct net_device *, int ); +int reset_airo_card( struct net_device * ); + +static void airo_config(dev_link_t *link); +static void airo_release(dev_link_t *link); +static int airo_event(event_t event, int priority, + event_callback_args_t *args); + +/* + The attach() and detach() entry points are used to create and destroy + "instances" of the driver, where each instance represents everything + needed to manage one actual PCMCIA card. +*/ + +static dev_link_t *airo_attach(void); +static void airo_detach(dev_link_t *); + +/* + You'll also need to prototype all the functions that will actually + be used to talk to your device. See 'pcmem_cs' for a good example + of a fully self-sufficient driver; the other drivers rely more or + less on other parts of the kernel. +*/ + +/* + The dev_info variable is the "key" that is used to match up this + device driver with appropriate cards, through the card configuration + database. +*/ + +static dev_info_t dev_info = "airo_cs"; + +/* + A linked list of "instances" of the aironet device. Each actual + PCMCIA card corresponds to one device instance, and is described + by one dev_link_t structure (defined in ds.h). + + You may not want to use a linked list for this -- for example, the + memory card driver uses an array of dev_link_t pointers, where minor + device numbers are used to derive the corresponding array index. +*/ + +static dev_link_t *dev_list = NULL; + +/* + A dev_link_t structure has fields for most things that are needed + to keep track of a socket, but there will usually be some device + specific information that also needs to be kept track of. The + 'priv' pointer in a dev_link_t structure can be used to point to + a device-specific private data structure, like this. + + A driver needs to provide a dev_node_t structure for each device + on a card. In some cases, there is only one device per card (for + example, ethernet cards, modems). In other cases, there may be + many actual or logical devices (SCSI adapters, memory cards with + multiple partitions). The dev_node_t structures need to be kept + in a linked list starting at the 'dev' field of a dev_link_t + structure. We allocate them in the card's private data structure, + because they generally shouldn't be allocated dynamically. + + In this case, we also provide a flag to indicate if a device is + "stopped" due to a power management event, or card ejection. The + device IO routines can use a flag like this to throttle IO to a + card that is not ready to accept it. +*/ + +typedef struct local_info_t { + dev_node_t node; + struct net_device *eth_dev; +} local_info_t; + +/*====================================================================== + + airo_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. + + The dev_link structure is initialized, but we don't actually + configure the card at this point -- we wait until we receive a + card insertion event. + + ======================================================================*/ + +static dev_link_t *airo_attach(void) +{ + client_reg_t client_reg; + dev_link_t *link; + local_info_t *local; + int ret; + + DEBUG(0, "airo_attach()\n"); + + /* Initialize the dev_link_t structure */ + link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL); + if (!link) { + printk(KERN_ERR "airo_cs: no memory for new device\n"); + return NULL; + } + memset(link, 0, sizeof(struct dev_link_t)); + + /* Interrupt setup */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->irq.Handler = NULL; + + /* + General socket configuration defaults can go here. In this + client, we assume very little, and rely on the CIS for almost + everything. In most clients, many details (i.e., number, sizes, + and attributes of IO windows) are fixed by the nature of the + device, and can be hard-wired here. + */ + link->conf.Attributes = 0; + link->conf.Vcc = 50; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Allocate space for private device-specific data */ + local = kmalloc(sizeof(local_info_t), GFP_KERNEL); + if (!local) { + printk(KERN_ERR "airo_cs: no memory for new device\n"); + kfree (link); + return NULL; + } + memset(local, 0, sizeof(local_info_t)); + link->priv = local; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &airo_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != 0) { + cs_error(link->handle, RegisterClient, ret); + airo_detach(link); + return NULL; + } + + return link; +} /* airo_attach */ + +/*====================================================================== + + This deletes a driver "instance". The device is de-registered + with Card Services. If it has been released, all local data + structures are freed. Otherwise, the structures will be freed + when the device is released. + + ======================================================================*/ + +static void airo_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DEBUG(0, "airo_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) break; + if (*linkp == NULL) + return; + + if (link->state & DEV_CONFIG) + airo_release(link); + + if ( ((local_info_t*)link->priv)->eth_dev ) { + stop_airo_card( ((local_info_t*)link->priv)->eth_dev, 0 ); + } + ((local_info_t*)link->priv)->eth_dev = NULL; + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + + + /* Unlink device structure, free pieces */ + *linkp = link->next; + if (link->priv) { + kfree(link->priv); + } + kfree(link); + +} /* airo_detach */ + +/*====================================================================== + + airo_config() is scheduled to run after a CARD_INSERTION event + is received, to configure the PCMCIA socket, and to make the + device available to the system. + + ======================================================================*/ + +#define CS_CHECK(fn, ret) \ +do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +static void airo_config(dev_link_t *link) +{ + client_handle_t handle; + tuple_t tuple; + cisparse_t parse; + local_info_t *dev; + int last_fn, last_ret; + u_char buf[64]; + win_req_t req; + memreq_t map; + + handle = link->handle; + dev = link->priv; + + DEBUG(0, "airo_config(0x%p)\n", link); + + /* + This reads the card's CONFIG tuple to find its configuration + registers. + */ + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* + In this loop, we scan the CIS for configuration table entries, + each of which describes a valid card configuration, including + voltage, IO window, memory window, and interrupt settings. + + We make no assumptions about the card to be configured: we use + just the information available in the CIS. In an ideal world, + this would work for any PCMCIA card, but it requires a complete + and accurate CIS. In practice, a driver usually "knows" most of + these things without consulting the CIS, and most client drivers + will only use the CIS to fill in implementation-defined details. + */ + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t dflt = { 0 }; + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + if (pcmcia_get_tuple_data(handle, &tuple) != 0 || + pcmcia_parse_tuple(handle, &tuple, &parse) != 0) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; + if (cfg->index == 0) goto next_entry; + link->conf.ConfigIndex = cfg->index; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vcc.present & (1<conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000; + + if (cfg->vpp1.present & (1<conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vpp1.present & (1<conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + link->io.Attributes2 = link->io.Attributes1; + link->io.BasePort2 = io->win[1].base; + link->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + + /* + Now set up a common memory window, if needed. There is room + in the dev_link_t structure for one memory window handle, + but if the base addresses need to be saved, or if multiple + windows are needed, the info should go in the private data + structure for this device. + + Note that the memory window base is a physical address, and + needs to be mapped to virtual space with ioremap() before it + is used. + */ + if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { + cistpl_mem_t *mem = + (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; + req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; + req.Base = mem->win[0].host_addr; + req.Size = mem->win[0].len; + req.AccessSpeed = 0; + if (pcmcia_request_window(&link->handle, &req, &link->win) != 0) + goto next_entry; + map.Page = 0; map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(link->win, &map) != 0) + goto next_entry; + } + /* If we got this far, we're cool! */ + break; + + next_entry: + CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple)); + } + + /* + Allocate an interrupt line. Note that this does not assign a + handler to the interrupt, unless the 'Handler' member of the + irq structure is initialized. + */ + if (link->conf.Attributes & CONF_ENABLE_IRQ) + CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq)); + + /* + This actually configures the PCMCIA socket -- setting up + the I/O windows and the interrupt mapping, and putting the + card and host interface into "Memory and IO" mode. + */ + CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf)); + ((local_info_t*)link->priv)->eth_dev = + init_airo_card( link->irq.AssignedIRQ, + link->io.BasePort1, 1, &handle_to_dev(handle) ); + if (!((local_info_t*)link->priv)->eth_dev) goto cs_failed; + + /* + At this point, the dev_node_t structure(s) need to be + initialized and arranged in a linked list at link->dev. + */ + strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name ); + dev->node.major = dev->node.minor = 0; + link->dev = &dev->node; + + /* Finally, report what we've done */ + printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", + dev->node.dev_name, link->conf.ConfigIndex, + link->conf.Vcc/10, link->conf.Vcc%10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); + if (link->conf.Attributes & CONF_ENABLE_IRQ) + printk(", irq %d", link->irq.AssignedIRQ); + if (link->io.NumPorts1) + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + if (link->io.NumPorts2) + printk(" & 0x%04x-0x%04x", link->io.BasePort2, + link->io.BasePort2+link->io.NumPorts2-1); + if (link->win) + printk(", mem 0x%06lx-0x%06lx", req.Base, + req.Base+req.Size-1); + printk("\n"); + + link->state &= ~DEV_CONFIG_PENDING; + return; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + airo_release(link); + +} /* airo_config */ + +/*====================================================================== + + After a card is removed, airo_release() will unregister the + device, and release the PCMCIA configuration. If the device is + still open, this will be postponed until it is closed. + + ======================================================================*/ + +static void airo_release(dev_link_t *link) +{ + DEBUG(0, "airo_release(0x%p)\n", link); + + /* Unlink the device chain */ + link->dev = NULL; + + /* + In a normal driver, additional code may be needed to release + other kernel data structures associated with this device. + */ + + /* Don't bother checking to see if these succeed or not */ + if (link->win) + pcmcia_release_window(link->win); + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; +} + +/*====================================================================== + + The card status event handler. Mostly, this schedules other + stuff to run after an event is received. + + When a CARD_REMOVAL event is received, we immediately set a + private flag to block future accesses to this device. All the + functions that actually access the device should check this flag + to make sure the card is still present. + + ======================================================================*/ + +static int airo_event(event_t event, int priority, + event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + local_info_t *local = link->priv; + + DEBUG(1, "airo_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) { + netif_device_detach(local->eth_dev); + airo_release(link); + } + break; + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + airo_config(link); + break; + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) { + netif_device_detach(local->eth_dev); + pcmcia_release_configuration(link->handle); + } + break; + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) { + pcmcia_request_configuration(link->handle, &link->conf); + reset_airo_card(local->eth_dev); + netif_device_attach(local->eth_dev); + } + break; + } + return 0; +} /* airo_event */ + +static struct pcmcia_driver airo_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "airo_cs", + }, + .attach = airo_attach, + .detach = airo_detach, +}; + +static int airo_cs_init(void) +{ + return pcmcia_register_driver(&airo_driver); +} + +static void airo_cs_cleanup(void) +{ + pcmcia_unregister_driver(&airo_driver); + BUG_ON(dev_list != NULL); +} + +/* + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License + as published by the Free Software Foundation; either version 2 + of the License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + In addition: + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. The name of the author may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +module_init(airo_cs_init); +module_exit(airo_cs_cleanup); -- cgit v1.2.3