From ef2f8d45771490de5b8373c25e983ee1e3aee9ea Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 12 Jun 2009 14:17:19 +0300 Subject: wl1251: add wl1251 prefix to all 1251 files Now that all 1271 files are split, we can add wl1251_ prefix to the files. Signed-off-by: Kalle Valo Reviewed-by: Vidhya Govindan Reviewed-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1251_boot.c | 297 ++++++++++++++++++++++++++++++ 1 file changed, 297 insertions(+) create mode 100644 drivers/net/wireless/wl12xx/wl1251_boot.c (limited to 'drivers/net/wireless/wl12xx/wl1251_boot.c') diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c new file mode 100644 index 00000000000..c52a2085671 --- /dev/null +++ b/drivers/net/wireless/wl12xx/wl1251_boot.c @@ -0,0 +1,297 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * Contact: Kalle Valo + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include + +#include "reg.h" +#include "wl1251_boot.h" +#include "wl1251_spi.h" +#include "wl1251_event.h" + +static void wl12xx_boot_enable_interrupts(struct wl12xx *wl) +{ + enable_irq(wl->irq); +} + +void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl) +{ + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask)); + wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL); +} + +int wl12xx_boot_soft_reset(struct wl12xx *wl) +{ + unsigned long timeout; + u32 boot_data; + + /* perform soft reset */ + wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); + + /* SOFT_RESET is self clearing */ + timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); + while (1) { + boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET); + wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); + if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) + break; + + if (time_after(jiffies, timeout)) { + /* 1.2 check pWhalBus->uSelfClearTime if the + * timeout was reached */ + wl12xx_error("soft reset timeout"); + return -1; + } + + udelay(SOFT_RESET_STALL_TIME); + } + + /* disable Rx/Tx */ + wl12xx_reg_write32(wl, ENABLE, 0x0); + + /* disable auto calibration on start*/ + wl12xx_reg_write32(wl, SPARE_A2, 0xffff); + + return 0; +} + +int wl12xx_boot_init_seq(struct wl12xx *wl) +{ + u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq; + + /* + * col #1: INTEGER_DIVIDER + * col #2: FRACTIONAL_DIVIDER + * col #3: ATTN_BB + * col #4: ALPHA_BB + * col #5: STOP_TIME_BB + * col #6: BB_PLL_LOOP_FILTER + */ + static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = { + + { 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/ + { 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/ + { 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/ + { 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/ + { 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */ + }; + + /* read NVS params */ + scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6); + wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6); + + /* read ELP_CMD */ + elp_cmd = wl12xx_reg_read32(wl, ELP_CMD); + wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd); + + /* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */ + ref_freq = scr_pad6 & 0x000000FF; + wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq); + + wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9); + + /* + * PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME) + */ + wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6); + + /* + * set the clock detect feature to work in the restart wu procedure + * (ELP_CFG_MODE[14]) and Select the clock source type + * (ELP_CFG_MODE[13:12]) + */ + tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000; + wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp); + + /* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */ + elp_cmd |= 0x00000040; + wl12xx_reg_write32(wl, ELP_CMD, elp_cmd); + + /* PG 1.2: Set the BB PLL stable time to be 1000usec + * (PLL_STABLE_TIME) */ + wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20); + + /* PG 1.2: read clock request time */ + init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME); + + /* + * PG 1.2: set the clock request time to be ref_clk_settling_time - + * 1ms = 4ms + */ + if (init_data > 0x21) + tmp = init_data - 0x21; + else + tmp = 0; + wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp); + + /* set BB PLL configurations in RF AFE */ + wl12xx_reg_write32(wl, 0x003058cc, 0x4B5); + + /* set RF_AFE_REG_5 */ + wl12xx_reg_write32(wl, 0x003058d4, 0x50); + + /* set RF_AFE_CTRL_REG_2 */ + wl12xx_reg_write32(wl, 0x00305948, 0x11c001); + + /* + * change RF PLL and BB PLL divider for VCO clock and adjust VCO + * bais current(RF_AFE_REG_13) + */ + wl12xx_reg_write32(wl, 0x003058f4, 0x1e); + + /* set BB PLL configurations */ + tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000; + wl12xx_reg_write32(wl, 0x00305840, tmp); + + /* set fractional divider according to Appendix C-BB PLL + * Calculations + */ + tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER]; + wl12xx_reg_write32(wl, 0x00305844, tmp); + + /* set the initial data for the sigma delta */ + wl12xx_reg_write32(wl, 0x00305848, 0x3039); + + /* + * set the accumulator attenuation value, calibration loop1 + * (alpha), calibration loop2 (beta), calibration loop3 (gamma) and + * the VCO gain + */ + tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) | + (LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1; + wl12xx_reg_write32(wl, 0x00305854, tmp); + + /* + * set the calibration stop time after holdoff time expires and set + * settling time HOLD_OFF_TIME_BB + */ + tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000; + wl12xx_reg_write32(wl, 0x00305858, tmp); + + /* + * set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL + * constant leakage current to linearize PFD to 0uA - + * BB_ILOOPF[7:3] + */ + tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030; + wl12xx_reg_write32(wl, 0x003058f8, tmp); + + /* + * set regulator output voltage for n divider to + * 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2], + * set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB + * PLL auto-call to normal mode- BB_CALGAIN_3DB[8] + */ + wl12xx_reg_write32(wl, 0x003058f0, 0x29); + + /* enable restart wakeup sequence (ELP_CMD[0]) */ + wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1); + + /* restart sequence completed */ + udelay(2000); + + return 0; +} + +int wl12xx_boot_run_firmware(struct wl12xx *wl) +{ + int loop, ret; + u32 chip_id, interrupt; + + wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); + + chip_id = wl12xx_reg_read32(wl, CHIP_ID_B); + + wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id); + + if (chip_id != wl->chip.id) { + wl12xx_error("chip id doesn't match after firmware boot"); + return -EIO; + } + + /* wait for init to complete */ + loop = 0; + while (loop++ < INIT_LOOP) { + udelay(INIT_LOOP_DELAY); + interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + + if (interrupt == 0xffffffff) { + wl12xx_error("error reading hardware complete " + "init indication"); + return -EIO; + } + /* check that ACX_INTR_INIT_COMPLETE is enabled */ + else if (interrupt & wl->chip.intr_init_complete) { + wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK, + wl->chip.intr_init_complete); + break; + } + } + + if (loop >= INIT_LOOP) { + wl12xx_error("timeout waiting for the hardware to " + "complete initialization"); + return -EIO; + } + + /* get hardware config command mail box */ + wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR); + + /* get hardware config event mail box */ + wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR); + + /* set the working partition to its "running" mode offset */ + wl12xx_set_partition(wl, + wl->chip.p_table[PART_WORK].mem.start, + wl->chip.p_table[PART_WORK].mem.size, + wl->chip.p_table[PART_WORK].reg.start, + wl->chip.p_table[PART_WORK].reg.size); + + wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x", + wl->cmd_box_addr, wl->event_box_addr); + + wl->chip.op_fw_version(wl); + + /* + * in case of full asynchronous mode the firmware event must be + * ready to receive event from the command mailbox + */ + + /* enable gpio interrupts */ + wl12xx_boot_enable_interrupts(wl); + + wl->chip.op_target_enable_interrupts(wl); + + /* unmask all mbox events */ + wl->event_mask = 0xffffffff; + + ret = wl12xx_event_unmask(wl); + if (ret < 0) { + wl12xx_error("EVENT mask setting failed"); + return ret; + } + + wl12xx_event_mbox_config(wl); + + /* firmware startup completed */ + return 0; +} -- cgit v1.2.3