From 4ef250114f6672dd36f9b961a71d229642517645 Mon Sep 17 00:00:00 2001 From: Dominik Geyer Date: Tue, 29 Dec 2009 08:27:57 +0100 Subject: ath9k: Fix Kconfig depends for ATH9K_DEBUGFS Add missing DEBUG_FS dependency for ATH9K_DEBUGFS in ath9k's Kconfig. Signed-off-by: Dominik D. Geyer Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 03a1106ad72..5774cea23a3 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -25,7 +25,7 @@ config ATH9K config ATH9K_DEBUGFS bool "Atheros ath9k debugging" - depends on ATH9K + depends on ATH9K && DEBUG_FS ---help--- Say Y, if you need access to ath9k's statistics for interrupts, rate control, etc. -- cgit v1.2.3 From 13bda1225072f26603d3aeefc1f14c18b2ab29cd Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 29 Dec 2009 22:57:28 +0800 Subject: ath9k: fix ito64 The unit of sizeof() is byte instead of bit, so fix it. The patch can fix debug output of some dma_addr_t variables. Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index e2cef2ff5d8..1597a42731e 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -33,11 +33,11 @@ struct ath_node; /* Macro to expand scalars to 64-bit objects */ -#define ito64(x) (sizeof(x) == 8) ? \ +#define ito64(x) (sizeof(x) == 1) ? \ (((unsigned long long int)(x)) & (0xff)) : \ - (sizeof(x) == 16) ? \ + (sizeof(x) == 2) ? \ (((unsigned long long int)(x)) & 0xffff) : \ - ((sizeof(x) == 32) ? \ + ((sizeof(x) == 4) ? \ (((unsigned long long int)(x)) & 0xffffffff) : \ (unsigned long long int)(x)) -- cgit v1.2.3 From 90852f7aed0f90d443efd7e0f9b82d8ac8186848 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 2 Jan 2010 10:31:42 +0100 Subject: mwl8k: fix configure_filter() memory leak on error If there was an error acquiring the firmware lock in mwl8k_configure_filter(), we would end up leaking the multicast command packet prepared by mwl8k_prepare_multicast(). Signed-off-by: Lennert Buytenhek Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 59d49159cf2..59f92105b0c 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3157,8 +3157,10 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw, /* Clear unsupported feature flags */ *total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC; - if (mwl8k_fw_lock(hw)) + if (mwl8k_fw_lock(hw)) { + kfree(cmd); return; + } if (priv->sniffer_enabled) { mwl8k_enable_sniffer(hw, 0); -- cgit v1.2.3 From 8a9ac160e844c7ce8074f6aa531feefb4acdee7c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 3 Jan 2010 11:19:35 +0200 Subject: iwl: off by one bug tid is used as an array offset. agg = &priv->stations[sta_id].tid[tid].agg; iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); It should be limitted to MAX_TID_COUNT - 1; struct iwl_tid_data tid[MAX_TID_COUNT]; regards, dan carpenter Signed-off-by: Dan Carpenter CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 484c5fdf7c2..761aab127e7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1961,7 +1961,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, struct ieee80211_tx_info *info; struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->u.status); - int tid = MAX_TID_COUNT; + int tid = MAX_TID_COUNT - 1; int sta_id; int freed; u8 *qc = NULL; -- cgit v1.2.3 From 7de3c5dc0ac89b847b00f25d16976c158dc38e4c Mon Sep 17 00:00:00 2001 From: Benoit Papillault Date: Sun, 3 Jan 2010 10:20:01 +0100 Subject: zd1211rw: Fix multicast filtering. If multicast parameter (as returned by zd_op_prepare_multicast) has changed, no bit in changed_flags is set. To handle this situation, we do not return if changed_flags is 0. If we do so, we will have some issue with IPv6 which uses multicast for link layer address resolution. Signed-off-by: Benoit Papillault Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index cc648efb8ed..9d9b263733e 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -987,12 +987,13 @@ static void zd_op_configure_filter(struct ieee80211_hw *hw, changed_flags &= SUPPORTED_FIF_FLAGS; *new_flags &= SUPPORTED_FIF_FLAGS; - /* changed_flags is always populated but this driver - * doesn't support all FIF flags so its possible we don't - * need to do anything */ - if (!changed_flags) - return; - + /* + * If multicast parameter (as returned by zd_op_prepare_multicast) + * has changed, no bit in changed_flags is set. To handle this + * situation, we do not return if changed_flags is 0. If we do so, + * we will have some issue with IPv6 which uses multicast for link + * layer address resolution. + */ if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)) zd_mc_add_all(&hash); -- cgit v1.2.3 From 359207c687cc8f4f9845c8dadd0d6dabad44e584 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 4 Jan 2010 10:40:39 -0500 Subject: ath5k: Fix eeprom checksum check for custom sized eeproms Commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5 enabled EEPROM checksum checks to avoid bogus bug reports but failed to address updating the code to consider devices with custom EEPROM sizes. Devices with custom sized EEPROMs have the upper limit size stuffed in the EEPROM. Use this as the upper limit instead of the static default size. In case of a checksum error also provide back the max size and whether or not this was the default size or a custom one. If the EEPROM is busted we add a failsafe check to ensure we don't loop forever or try to read bogus areas of hardware. This closes bug 14874 http://bugzilla.kernel.org/show_bug.cgi?id=14874 Cc: stable@kernel.org Cc: David Quan Cc: Stephen Beahm Reported-by: Joshua Covington Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/eeprom.c | 32 +++++++++++++++++++++++++++++--- drivers/net/wireless/ath/ath5k/eeprom.h | 8 ++++++++ 2 files changed, 37 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 79188526260..9a96550006a 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -97,7 +97,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; int ret; u16 val; - u32 cksum, offset; + u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX; /* * Read values from EEPROM and store them in the capability structure @@ -116,12 +116,38 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) * Validate the checksum of the EEPROM date. There are some * devices with invalid EEPROMs. */ - for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) { + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val); + if (val) { + eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) << + AR5K_EEPROM_SIZE_ENDLOC_SHIFT; + AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val); + eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE; + + /* + * Fail safe check to prevent stupid loops due + * to busted EEPROMs. XXX: This value is likely too + * big still, waiting on a better value. + */ + if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) { + ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: " + "%d (0x%04x) max expected: %d (0x%04x)\n", + eep_max, eep_max, + 3 * AR5K_EEPROM_INFO_MAX, + 3 * AR5K_EEPROM_INFO_MAX); + return -EIO; + } + } + + for (cksum = 0, offset = 0; offset < eep_max; offset++) { AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val); cksum ^= val; } if (cksum != AR5K_EEPROM_INFO_CKSUM) { - ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum); + ATH5K_ERR(ah->ah_sc, "Invalid EEPROM " + "checksum: 0x%04x eep_max: 0x%04x (%s)\n", + cksum, eep_max, + eep_max == AR5K_EEPROM_INFO_MAX ? + "default size" : "custom size"); return -EIO; } diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h index 0123f3521a0..473a483bb9c 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.h +++ b/drivers/net/wireless/ath/ath5k/eeprom.h @@ -37,6 +37,14 @@ #define AR5K_EEPROM_RFKILL_POLARITY_S 1 #define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ + +/* FLASH(EEPROM) Defines for AR531X chips */ +#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */ +#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */ +#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0 +#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4 +#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12 + #define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ #define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ #define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) -- cgit v1.2.3 From b59a52f12e483b79e7d32da7ec30dcf3b2e0210b Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Wed, 30 Dec 2009 11:36:29 +0100 Subject: rt2x00: use correct headroom for transmission Use rt2x00dev->ops->extra_tx_headroom, not rt2x00dev->hw->extra_tx_headroom in the tx code, as the later may include other headroom not to be used in the chipset driver. Signed-off-by: Pavel Roskin Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 239afc7a9c0..9915a09141e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -104,7 +104,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) * is also mapped to the DMA so it can be used for transfering * additional descriptor information to the hardware. */ - skb_push(skb, rt2x00dev->hw->extra_tx_headroom); + skb_push(skb, rt2x00dev->ops->extra_tx_headroom); skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE); @@ -112,7 +112,7 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) /* * Restore data pointer to original location again. */ - skb_pull(skb, rt2x00dev->hw->extra_tx_headroom); + skb_pull(skb, rt2x00dev->ops->extra_tx_headroom); skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; } @@ -134,7 +134,7 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) * by the driver, but it was actually mapped to DMA. */ dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, - skb->len + rt2x00dev->hw->extra_tx_headroom, + skb->len + rt2x00dev->ops->extra_tx_headroom, DMA_TO_DEVICE); skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; } -- cgit v1.2.3 From 301a8234ea81938f0f083ae4e274d9c9296f3c86 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Wed, 30 Dec 2009 11:36:33 +0100 Subject: rt2x00: Fix LED configuration setting for rt2800. rt2800_blink_set uses an illegal value to set the LED_CFG_G_LED_MODE field of the LED_CFG register. This field is only 2 bits large, so should be initialized with value that fits. Use default value from the vendor driver. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 27bf887f145..9deae41cb78 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -340,7 +340,7 @@ static int rt2800_blink_set(struct led_classdev *led_cdev, rt2x00_set_field32(®, LED_CFG_OFF_PERIOD, *delay_off); rt2x00_set_field32(®, LED_CFG_SLOW_BLINK_PERIOD, 3); rt2x00_set_field32(®, LED_CFG_R_LED_MODE, 3); - rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 12); + rt2x00_set_field32(®, LED_CFG_G_LED_MODE, 3); rt2x00_set_field32(®, LED_CFG_Y_LED_MODE, 3); rt2x00_set_field32(®, LED_CFG_LED_POLAR, 1); rt2800_register_write(led->rt2x00dev, LED_CFG, reg); -- cgit v1.2.3 From 7a4a77b7771164d61ce702a588067d1e1d66db7c Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Wed, 30 Dec 2009 11:36:30 +0100 Subject: rt2x00: Properly request tx headroom for alignment operations. Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too small" error message when a frame needs to be properly aligned before transmitting it. This is because the space needed to ensure proper alignment isn't requested from mac80211. Fix this by adding sufficient amount of alignment space to the amount of headroom requested for TX frames. Reported-by: David Ellingsworth Signed-off-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++++ drivers/net/wireless/rt2x00/rt2x00dev.c | 12 +++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 4d841c07c97..dcfc8c25d1a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -112,6 +112,12 @@ #define ALIGN_SIZE(__skb, __header) \ ( ((unsigned long)((__skb)->data + (__header))) & 3 ) +/* + * Constants for extra TX headroom for alignment purposes. + */ +#define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */ +#define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */ + /* * Standard timing and size defines. * These values should follow the ieee80211 specifications. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 06c43ca39bf..265e66dba55 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -686,7 +686,17 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) /* * Initialize extra TX headroom required. */ - rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom; + rt2x00dev->hw->extra_tx_headroom = + max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM, + rt2x00dev->ops->extra_tx_headroom); + + /* + * Take TX headroom required for alignment into account. + */ + if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags)) + rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE; + else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) + rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE; /* * Register HW. -- cgit v1.2.3 From c8106d7625a58ee4387cb2efe3e82320ad44b467 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Fri, 8 Jan 2010 10:04:30 -0800 Subject: iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr When txq read_ptr equals to write_ptr, iwl_queue_used should always return false. Because there is no used TFD in this case. This is a complementary fix to the fix already included in commit "iwl3945: fix panic in iwl3945 driver". Both fixes are needed to address the panic below. This problem was discussed on linux-wireless in http://thread.gmane.org/gmane.linux.kernel.wireless.general/43568 <1>[ 7290.414172] IP: [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.414205] PGD 0 <1>[ 7290.414214] Thread overran stack, or stack corrupted <0>[ 7290.414229] Oops: 0002 [#1] PREEMPT SMP <0>[ 7290.414246] last sysfs file: /sys/devices/platform/coretemp.1/temp1_input <4>[ 7290.414265] CPU 0 <4>[ 7290.414274] Modules linked in: af_packet nfsd usb_storage usb_libusual cpufreq_powersave exportfs cpufreq_conservative iwl3945 nfs cpufreq_userspace snd_hda_codec_realtek acpi_cpufreq uvcvideo lockd iwlcore snd_hda_intel joydev coretemp nfs_acl videodev snd_hda_codec mac80211 v4l1_compat snd_hwdep sbp2 v4l2_compat_ioctl32 uhci_hcd psmouse auth_rpcgss ohci1394 cfg80211 ehci_hcd video ieee1394 snd_pcm serio_raw battery ac nvidia(P) usbcore output sunrpc evdev lirc_ene0100 snd_page_alloc rfkill tg3 libphy fuse lzo lzo_decompress lzo_compress <6>[ 7290.414486] Pid: 0, comm: swapper Tainted: P 2.6.32-rc8-wl #213 Aspire 5720 <6>[ 7290.414507] RIP: 0010:[] [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <6>[ 7290.414541] RSP: 0018:ffff880002203d60 EFLAGS: 00010246 <6>[ 7290.414557] RAX: 000000000000004f RBX: ffff880064c11600 RCX: 0000000000000013 <6>[ 7290.414576] RDX: ffffffffa0ddcf20 RSI: ffff8800512b7008 RDI: 0000000000000038 <6>[ 7290.414596] RBP: ffff880002203dd0 R08: 0000000000000000 R09: 0000000000000100 <6>[ 7290.414616] R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000a0 <6>[ 7290.414635] R13: 0000000000000002 R14: 0000000000000013 R15: 0000000000020201 <6>[ 7290.414655] FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 <6>[ 7290.414677] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <6>[ 7290.414693] CR2: 0000000000000041 CR3: 0000000001001000 CR4: 00000000000006f0 <6>[ 7290.414712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <6>[ 7290.414732] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[ 7290.414752] Process swapper (pid: 0, threadinfo ffffffff81524000, task ffffffff81528b60) <0>[ 7290.414772] Stack: <4>[ 7290.414780] ffff880002203da0 0000000000000046 0000000000000000 0000000000000046 <4>[ 7290.414804] <0> 0000000000000282 0000000000000282 0000000000000282 ffff880064c12010 <4>[ 7290.414830] <0> ffff880002203db0 ffff880064c11600 ffff880064c12e50 ffff8800512b7000 <0>[ 7290.414858] Call Trace: <0>[ 7290.414867] <4>[ 7290.414884] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.414910] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.414931] [] tasklet_action+0x101/0x110 <4>[ 7290.414950] [] __do_softirq+0xc0/0x160 <4>[ 7290.414968] [] call_softirq+0x1c/0x30 <4>[ 7290.414986] [] do_softirq+0x75/0xb0 <4>[ 7290.415003] [] irq_exit+0x95/0xa0 <4>[ 7290.415020] [] do_IRQ+0x77/0xf0 <4>[ 7290.415038] [] ret_from_intr+0x0/0xf <0>[ 7290.415052] <4>[ 7290.415067] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415087] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415107] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415130] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415149] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415168] [] ? rest_init+0x75/0x80 <4>[ 7290.415187] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.415206] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.415227] [] ? x86_64_start_kernel+0xe4/0xeb <0>[ 7290.415243] Code: 00 41 39 ce 0f 8d e8 01 00 00 48 8b 47 40 48 63 d2 48 69 d2 98 00 00 00 4c 8b 04 02 48 c7 c2 20 cf dd a0 49 8d 78 38 49 8d 40 4f 47 09 00 c6 47 0c 00 c6 47 0f 00 c6 47 12 00 c6 47 15 00 49 <1>[ 7290.415382] RIP [] iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415410] RSP <0>[ 7290.415421] CR2: 0000000000000041 <4>[ 7290.415436] ---[ end trace ec46807277caa515 ]--- <0>[ 7290.415450] Kernel panic - not syncing: Fatal exception in interrupt <4>[ 7290.415468] Pid: 0, comm: swapper Tainted: P D 2.6.32-rc8-wl #213 <4>[ 7290.415486] Call Trace: <4>[ 7290.415495] [] panic+0x7d/0x13a <4>[ 7290.415519] [] oops_end+0xda/0xe0 <4>[ 7290.415538] [] no_context+0xea/0x250 <4>[ 7290.415557] [] ? select_task_rq_fair+0x511/0x780 <4>[ 7290.415578] [] __bad_area_nosemaphore+0x125/0x1e0 <4>[ 7290.415597] [] ? __enqueue_entity+0x7c/0x80 <4>[ 7290.415616] [] ? enqueue_task_fair+0x111/0x150 <4>[ 7290.415636] [] bad_area_nosemaphore+0xe/0x10 <4>[ 7290.415656] [] do_page_fault+0x26a/0x320 <4>[ 7290.415674] [] page_fault+0x1f/0x30 <4>[ 7290.415697] [] ? iwl3945_rx_reply_tx+0xc1/0x450 [iwl3945] <4>[ 7290.415723] [] iwl3945_irq_tasklet+0x657/0x1740 [iwl3945] <4>[ 7290.415746] [] ? _spin_unlock+0x30/0x60 <4>[ 7290.415764] [] tasklet_action+0x101/0x110 <4>[ 7290.415783] [] __do_softirq+0xc0/0x160 <4>[ 7290.415801] [] call_softirq+0x1c/0x30 <4>[ 7290.415818] [] do_softirq+0x75/0xb0 <4>[ 7290.415835] [] irq_exit+0x95/0xa0 <4>[ 7290.415852] [] do_IRQ+0x77/0xf0 <4>[ 7290.415869] [] ret_from_intr+0x0/0xf <4>[ 7290.415883] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415911] [] ? acpi_idle_enter_bm+0x27a/0x2a5 <4>[ 7290.415931] [] ? acpi_idle_enter_bm+0x270/0x2a5 <4>[ 7290.415952] [] ? cpuidle_idle_call+0x93/0xf0 <4>[ 7290.415971] [] ? cpu_idle+0xa7/0x110 <4>[ 7290.415989] [] ? rest_init+0x75/0x80 <4>[ 7290.416007] [] ? start_kernel+0x3a7/0x3b3 <4>[ 7290.416026] [] ? x86_64_start_reservations+0x125/0x129 <4>[ 7290.416047] [] ? x86_64_start_kernel+0xe4/0xeb Reported-by: Maxim Levitsky Tested-by: Maxim Levitsky Signed-off-by: Zhu Yi Signed-off-by: Reinette Chatre CC: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-dev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 165d1f6e2dd..3822cf53e36 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -711,7 +711,7 @@ extern void iwl_txq_ctx_stop(struct iwl_priv *priv); extern int iwl_queue_space(const struct iwl_queue *q); static inline int iwl_queue_used(const struct iwl_queue *q, int i) { - return q->write_ptr > q->read_ptr ? + return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr && i < q->write_ptr) : !(i < q->read_ptr && i >= q->write_ptr); } -- cgit v1.2.3 From c91c3efca5297bd67324654524ced38162f2e579 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 8 Jan 2010 10:04:31 -0800 Subject: iwlwifi: disable tx on beacon update notification On beacon change update notification from mac we are not disabling the tx in adhoc mode. Mac sends BSS_CHANGED_BEACON_ENABLED when station leaves IBSS. Driver should indicate uCode to not to send anything on receiving this notification. Functionality to indicate uCode is duplicated across two notifications so created a common function called iwl_set_no_assoc. Fix the issue at http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2133. Signed-off-by: Abhijeet Kolekar Tested-by: Johannes Berg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 45 ++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 20 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 574d3665870..5461f105bd2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2344,6 +2344,21 @@ static void iwl_ht_conf(struct iwl_priv *priv, IWL_DEBUG_MAC80211(priv, "leave\n"); } +static inline void iwl_set_no_assoc(struct iwl_priv *priv) +{ + priv->assoc_id = 0; + iwl_led_disassociate(priv); + /* + * inform the ucode that there is no longer an + * association and that no more packets should be + * sent + */ + priv->staging_rxon.filter_flags &= + ~RXON_FILTER_ASSOC_MSK; + priv->staging_rxon.assoc_id = 0; + iwlcore_commit_rxon(priv); +} + #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) void iwl_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -2475,20 +2490,8 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; if (!iwl_is_rfkill(priv)) priv->cfg->ops->lib->post_associate(priv); - } else { - priv->assoc_id = 0; - iwl_led_disassociate(priv); - - /* - * inform the ucode that there is no longer an - * association and that no more packets should be - * send - */ - priv->staging_rxon.filter_flags &= - ~RXON_FILTER_ASSOC_MSK; - priv->staging_rxon.assoc_id = 0; - iwlcore_commit_rxon(priv); - } + } else + iwl_set_no_assoc(priv); } if (changes && iwl_is_associated(priv) && priv->assoc_id) { @@ -2503,12 +2506,14 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw, } } - if ((changes & BSS_CHANGED_BEACON_ENABLED) && - vif->bss_conf.enable_beacon) { - memcpy(priv->staging_rxon.bssid_addr, - bss_conf->bssid, ETH_ALEN); - memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); - iwlcore_config_ap(priv); + if (changes & BSS_CHANGED_BEACON_ENABLED) { + if (vif->bss_conf.enable_beacon) { + memcpy(priv->staging_rxon.bssid_addr, + bss_conf->bssid, ETH_ALEN); + memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); + iwlcore_config_ap(priv); + } else + iwl_set_no_assoc(priv); } mutex_unlock(&priv->mutex); -- cgit v1.2.3 From 39825f4dc9f4e409e8ea43ef4df04a924699ad1f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 9 Jan 2010 11:41:48 +0300 Subject: iwlwifi: silence buffer overflow warning Smatch (and presumably other static checkers) complain that MAX_TID_COUNT is past the end of the array. In the resulting discussion, Zhu Yi pointed out that this value is not used in real life and the assignment was only there to silence a gcc warning. If there were a bug in the surrounding code and the value were used, the WARN_ON(!qc) would print a warning before the crash. Signed-off-by: Dan Carpenter Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 761aab127e7..9b4b8b5c757 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1961,7 +1961,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, struct ieee80211_tx_info *info; struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0]; u32 status = le32_to_cpu(tx_resp->u.status); - int tid = MAX_TID_COUNT - 1; + int uninitialized_var(tid); int sta_id; int freed; u8 *qc = NULL; -- cgit v1.2.3