From cfc3a44c3c32abe48898398d9a92e8524c976803 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 4 Jan 2009 16:12:11 -0800 Subject: starfire: use request_firmware() Firmware blob is big endian Signed-off-by: Jaswinder Singh Rajput Signed-off-by: David S. Miller --- drivers/net/starfire.c | 54 +++++- drivers/net/starfire_firmware.h | 346 --------------------------------------- drivers/net/starfire_firmware.pl | 31 ---- 3 files changed, 48 insertions(+), 383 deletions(-) delete mode 100644 drivers/net/starfire_firmware.h delete mode 100644 drivers/net/starfire_firmware.pl (limited to 'drivers/net') diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index f54ac2389da..57fb1f71c47 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -42,11 +42,11 @@ #include #include #include +#include #include /* Processor type for cache alignment. */ #include #include -#include "starfire_firmware.h" /* * The current frame processor firmware fails to checksum a fragment * of length 1. If and when this is fixed, the #define below can be removed. @@ -173,6 +173,10 @@ static int full_duplex[MAX_UNITS] = {0, }; #define skb_first_frag_len(skb) skb_headlen(skb) #define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1) +/* Firmware names */ +#define FIRMWARE_RX "adaptec/starfire_rx.bin" +#define FIRMWARE_TX "adaptec/starfire_tx.bin" + /* These identify the driver base version and may not be removed. */ static char version[] = KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker \n" @@ -182,6 +186,8 @@ MODULE_AUTHOR("Donald Becker "); MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_FIRMWARE(FIRMWARE_RX); +MODULE_FIRMWARE(FIRMWARE_TX); module_param(max_interrupt_work, int, 0); module_param(mtu, int, 0); @@ -902,9 +908,12 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val static int netdev_open(struct net_device *dev) { + const struct firmware *fw_rx, *fw_tx; + const __be32 *fw_rx_data, *fw_tx_data; struct netdev_private *np = netdev_priv(dev); void __iomem *ioaddr = np->base; int i, retval; + size_t tx_size, rx_size; size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size; /* Do we ever need to reset the chip??? */ @@ -1040,11 +1049,40 @@ static int netdev_open(struct net_device *dev) writel(ETH_P_8021Q, ioaddr + VlanType); #endif /* VLAN_SUPPORT */ + retval = request_firmware(&fw_rx, FIRMWARE_RX, &np->pci_dev->dev); + if (retval) { + printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", + FIRMWARE_RX); + return retval; + } + if (fw_rx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_rx->size, FIRMWARE_RX); + retval = -EINVAL; + goto out_rx; + } + retval = request_firmware(&fw_tx, FIRMWARE_TX, &np->pci_dev->dev); + if (retval) { + printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n", + FIRMWARE_TX); + goto out_rx; + } + if (fw_tx->size % 4) { + printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n", + fw_tx->size, FIRMWARE_TX); + retval = -EINVAL; + goto out_tx; + } + fw_rx_data = (const __be32 *)&fw_rx->data[0]; + fw_tx_data = (const __be32 *)&fw_tx->data[0]; + rx_size = fw_rx->size / 4; + tx_size = fw_tx->size / 4; + /* Load Rx/Tx firmware into the frame processors */ - for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++) - writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4); - for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++) - writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4); + for (i = 0; i < rx_size; i++) + writel(be32_to_cpup(&fw_rx_data[i]), ioaddr + RxGfpMem + i * 4); + for (i = 0; i < tx_size; i++) + writel(be32_to_cpup(&fw_tx_data[i]), ioaddr + TxGfpMem + i * 4); if (enable_hw_cksum) /* Enable the Rx and Tx units, and the Rx/Tx frame processors. */ writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl); @@ -1056,7 +1094,11 @@ static int netdev_open(struct net_device *dev) printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name); - return 0; +out_tx: + release_firmware(fw_tx); +out_rx: + release_firmware(fw_rx); + return retval; } diff --git a/drivers/net/starfire_firmware.h b/drivers/net/starfire_firmware.h deleted file mode 100644 index 0a668528955..00000000000 --- a/drivers/net/starfire_firmware.h +++ /dev/null @@ -1,346 +0,0 @@ -/* - * Copyright 2003 Adaptec, Inc. - * - * Please read the following license before using the Adaptec Software - * ("Program"). If you do not agree to the license terms, do not use the - * Program: - * - * You agree to be bound by version 2 of the General Public License ("GPL") - * dated June 1991, which can be found at http://www.fsf.org/licenses/gpl.html. - * If the link is broken, write to Free Software Foundation, 59 Temple Place, - * Boston, Massachusetts 02111-1307. - * - * BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND - * THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE - * IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE - * (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR - * OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR - * DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES - * ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM. - * - */ - -static const u32 firmware_rx[] = { - 0x010003dc, 0x00000000, - 0x04000421, 0x00000086, - 0x80000015, 0x0000180e, - 0x81000015, 0x00006664, - 0x1a0040ab, 0x00000b06, - 0x14200011, 0x00000000, - 0x14204022, 0x0000aaaa, - 0x14204022, 0x00000300, - 0x14204022, 0x00000000, - 0x1a0040ab, 0x00000b14, - 0x14200011, 0x00000000, - 0x83000015, 0x00000002, - 0x04000021, 0x00000000, - 0x00000010, 0x00000000, - 0x04000421, 0x00000087, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00008015, 0x00000000, - 0x0000003e, 0x00000000, - 0x00000010, 0x00000000, - 0x82000015, 0x00004000, - 0x009e8050, 0x00000000, - 0x03008015, 0x00000000, - 0x86008015, 0x00000000, - 0x82000015, 0x00008000, - 0x0100001c, 0x00000000, - 0x000050a0, 0x0000010c, - 0x4e20d011, 0x00006008, - 0x1420d012, 0x00004008, - 0x0000f090, 0x00007000, - 0x0000c8b0, 0x00003000, - 0x00004040, 0x00000000, - 0x00108015, 0x00000000, - 0x00a2c150, 0x00004000, - 0x00a400b0, 0x00000014, - 0x00000020, 0x00000000, - 0x2500400d, 0x00002525, - 0x00047220, 0x00003100, - 0x00934070, 0x00000000, - 0x00000020, 0x00000000, - 0x00924460, 0x00000184, - 0x2b20c011, 0x00000000, - 0x0000c420, 0x00000540, - 0x36014018, 0x0000422d, - 0x14200011, 0x00000000, - 0x00924460, 0x00000183, - 0x3200001f, 0x00000034, - 0x02ac0015, 0x00000002, - 0x00a60110, 0x00000008, - 0x42200011, 0x00000000, - 0x00924060, 0x00000103, - 0x0000001e, 0x00000000, - 0x00000020, 0x00000100, - 0x0000001e, 0x00000000, - 0x00924460, 0x00000086, - 0x00004080, 0x00000000, - 0x0092c070, 0x00000000, - 0x00924060, 0x00000100, - 0x0000c890, 0x00005000, - 0x00a6c110, 0x00000000, - 0x00b0c090, 0x00000012, - 0x021c0015, 0x00000000, - 0x3200001f, 0x00000034, - 0x00924460, 0x00000510, - 0x44210011, 0x00000000, - 0x42000011, 0x00000000, - 0x83000015, 0x00000040, - 0x00924460, 0x00000508, - 0x45014018, 0x00004545, - 0x00808050, 0x00000000, - 0x62208012, 0x00000000, - 0x82000015, 0x00000800, - 0x15200011, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x80000015, 0x0000eea4, - 0x81000015, 0x0000005f, - 0x00000060, 0x00000000, - 0x00004120, 0x00000000, - 0x00004a00, 0x00004000, - 0x00924460, 0x00000190, - 0x5601401a, 0x00005956, - 0x14000011, 0x00000000, - 0x00934050, 0x00000018, - 0x00930050, 0x00000018, - 0x3601403a, 0x0000002d, - 0x000643a9, 0x00000000, - 0x0000c420, 0x00000140, - 0x5601401a, 0x00005956, - 0x14000011, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x000642a9, 0x00000000, - 0x00024420, 0x00000183, - 0x5601401a, 0x00005956, - 0x82000015, 0x00002000, - 0x15200011, 0x00000000, - 0x82000015, 0x00000010, - 0x15200011, 0x00000000, - 0x82000015, 0x00000010, - 0x15200011, 0x00000000, -}; /* 104 Rx instructions */ -#define FIRMWARE_RX_SIZE 104 - -static const u32 firmware_tx[] = { - 0x010003dc, 0x00000000, - 0x04000421, 0x00000086, - 0x80000015, 0x0000180e, - 0x81000015, 0x00006664, - 0x1a0040ab, 0x00000b06, - 0x14200011, 0x00000000, - 0x14204022, 0x0000aaaa, - 0x14204022, 0x00000300, - 0x14204022, 0x00000000, - 0x1a0040ab, 0x00000b14, - 0x14200011, 0x00000000, - 0x83000015, 0x00000002, - 0x04000021, 0x00000000, - 0x00000010, 0x00000000, - 0x04000421, 0x00000087, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00008015, 0x00000000, - 0x0000003e, 0x00000000, - 0x00000010, 0x00000000, - 0x82000015, 0x00004000, - 0x009e8050, 0x00000000, - 0x03008015, 0x00000000, - 0x86008015, 0x00000000, - 0x82000015, 0x00008000, - 0x0100001c, 0x00000000, - 0x000050a0, 0x0000010c, - 0x4e20d011, 0x00006008, - 0x1420d012, 0x00004008, - 0x0000f090, 0x00007000, - 0x0000c8b0, 0x00003000, - 0x00004040, 0x00000000, - 0x00108015, 0x00000000, - 0x00a2c150, 0x00004000, - 0x00a400b0, 0x00000014, - 0x00000020, 0x00000000, - 0x2500400d, 0x00002525, - 0x00047220, 0x00003100, - 0x00934070, 0x00000000, - 0x00000020, 0x00000000, - 0x00924460, 0x00000184, - 0x2b20c011, 0x00000000, - 0x0000c420, 0x00000540, - 0x36014018, 0x0000422d, - 0x14200011, 0x00000000, - 0x00924460, 0x00000183, - 0x3200001f, 0x00000034, - 0x02ac0015, 0x00000002, - 0x00a60110, 0x00000008, - 0x42200011, 0x00000000, - 0x00924060, 0x00000103, - 0x0000001e, 0x00000000, - 0x00000020, 0x00000100, - 0x0000001e, 0x00000000, - 0x00924460, 0x00000086, - 0x00004080, 0x00000000, - 0x0092c070, 0x00000000, - 0x00924060, 0x00000100, - 0x0000c890, 0x00005000, - 0x00a6c110, 0x00000000, - 0x00b0c090, 0x00000012, - 0x021c0015, 0x00000000, - 0x3200001f, 0x00000034, - 0x00924460, 0x00000510, - 0x44210011, 0x00000000, - 0x42000011, 0x00000000, - 0x83000015, 0x00000040, - 0x00924460, 0x00000508, - 0x45014018, 0x00004545, - 0x00808050, 0x00000000, - 0x62208012, 0x00000000, - 0x82000015, 0x00000800, - 0x15200011, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x80000015, 0x0000eea4, - 0x81000015, 0x0000005f, - 0x00000060, 0x00000000, - 0x00004120, 0x00000000, - 0x00004a00, 0x00004000, - 0x00924460, 0x00000190, - 0x5601401a, 0x00005956, - 0x14000011, 0x00000000, - 0x00934050, 0x00000018, - 0x00930050, 0x00000018, - 0x3601403a, 0x0000002d, - 0x000643a9, 0x00000000, - 0x0000c420, 0x00000140, - 0x5601401a, 0x00005956, - 0x14000011, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x000642a9, 0x00000000, - 0x00024420, 0x00000183, - 0x5601401a, 0x00005956, - 0x82000015, 0x00002000, - 0x15200011, 0x00000000, - 0x82000015, 0x00000010, - 0x15200011, 0x00000000, - 0x82000015, 0x00000010, - 0x15200011, 0x00000000, -}; /* 104 Tx instructions */ -#define FIRMWARE_TX_SIZE 104 -#if 0 -static const u32 firmware_wol[] = { - 0x010003dc, 0x00000000, - 0x19000421, 0x00000087, - 0x80000015, 0x00001a1a, - 0x81000015, 0x00001a1a, - 0x1a0040ab, 0x00000b06, - 0x15200011, 0x00000000, - 0x15204022, 0x0000aaaa, - 0x15204022, 0x00000300, - 0x15204022, 0x00000000, - 0x1a0040ab, 0x00000b15, - 0x15200011, 0x00000000, - 0x83000015, 0x00000002, - 0x04000021, 0x00000000, - 0x00000010, 0x00000000, - 0x04000421, 0x00000087, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00008015, 0x00000000, - 0x0000003e, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x82000015, 0x00004000, - 0x82000015, 0x00008000, - 0x0000000c, 0x00000000, - 0x00000010, 0x00000000, - 0x00004080, 0x00000100, - 0x1f20c011, 0x00001122, - 0x2720f011, 0x00003011, - 0x19200071, 0x00000000, - 0x1a200051, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x1d2040a4, 0x00003344, - 0x1d2040a2, 0x00005566, - 0x000040a0, 0x00000100, - 0x00108050, 0x00000001, - 0x1a208012, 0x00000006, - 0x82000015, 0x00008080, - 0x010003dc, 0x00000000, - 0x1d2040a4, 0x00002233, - 0x1d2040a4, 0x00004455, - 0x2d208011, 0x00000005, - 0x1d2040a4, 0x00006611, - 0x00108050, 0x00000001, - 0x27200011, 0x00000000, - 0x1d2050a4, 0x00006600, - 0x82000015, 0x00008080, - 0x010003dc, 0x00000000, - 0x00000050, 0x00000000, - 0x1b200031, 0x00000000, - 0x0000001e, 0x00000000, - 0x0000001e, 0x00000000, - 0x0000001e, 0x00000000, - 0x0000001e, 0x00000000, - 0x00924460, 0x00000086, - 0x00004080, 0x00000000, - 0x0092c070, 0x00000000, - 0x00924060, 0x00000100, - 0x0000c890, 0x00005000, - 0x00a6c110, 0x00000000, - 0x00b0c090, 0x00000012, - 0x021c0015, 0x00000000, - 0x3200001f, 0x00000034, - 0x00924460, 0x00000510, - 0x44210011, 0x00000000, - 0x42000011, 0x00000000, - 0x83000015, 0x00000040, - 0x00924460, 0x00000508, - 0x476a0012, 0x00000100, - 0x83000015, 0x00000008, - 0x16200011, 0x00000000, - 0x001e8050, 0x00000000, - 0x001e8050, 0x00000000, - 0x00808050, 0x00000000, - 0x03008015, 0x00000000, - 0x62208012, 0x00000000, - 0x82000015, 0x00000800, - 0x16200011, 0x00000000, - 0x80000015, 0x0000eea4, - 0x81000015, 0x0000005f, - 0x00000020, 0x00000000, - 0x00004120, 0x00000000, - 0x00004a00, 0x00004000, - 0x00924460, 0x00000190, - 0x5c01401a, 0x0000595c, - 0x15000011, 0x00000000, - 0x00934050, 0x00000018, - 0x00930050, 0x00000018, - 0x3601403a, 0x0000002d, - 0x00064029, 0x00000000, - 0x0000c420, 0x00000140, - 0x5c01401a, 0x0000595c, - 0x15000011, 0x00000000, - 0x00000010, 0x00000000, - 0x00000010, 0x00000000, - 0x00064029, 0x00000000, - 0x00024420, 0x00000183, - 0x5c01401a, 0x0000595c, - 0x82000015, 0x00002000, - 0x16200011, 0x00000000, - 0x82000015, 0x00000010, - 0x16200011, 0x00000000, - 0x82000015, 0x00000010, - 0x16200011, 0x00000000, -}; /* 104 WoL instructions */ -#define FIRMWARE_WOL_SIZE 104 -#endif diff --git a/drivers/net/starfire_firmware.pl b/drivers/net/starfire_firmware.pl deleted file mode 100644 index 0c82b80e107..00000000000 --- a/drivers/net/starfire_firmware.pl +++ /dev/null @@ -1,31 +0,0 @@ -#!/usr/bin/perl - -# This script can be used to generate a new starfire_firmware.h -# from GFP_RX.DAT and GFP_TX.DAT, files included with the DDK -# and also with the Novell drivers. - -open FW, "GFP_RX.DAT" || die; -open FWH, ">starfire_firmware.h" || die; - -printf(FWH "static u32 firmware_rx[] = {\n"); -$counter = 0; -while ($foo = ) { - chomp; - printf(FWH " 0x%s, 0x0000%s,\n", substr($foo, 4, 8), substr($foo, 0, 4)); - $counter++; -} - -close FW; -open FW, "GFP_TX.DAT" || die; - -printf(FWH "};\t/* %d Rx instructions */\n#define FIRMWARE_RX_SIZE %d\n\nstatic u32 firmware_tx[] = {\n", $counter, $counter); -$counter = 0; -while ($foo = ) { - chomp; - printf(FWH " 0x%s, 0x0000%s,\n", substr($foo, 4, 8), substr($foo, 0, 4)); - $counter++; -} - -close FW; -printf(FWH "};\t/* %d Tx instructions */\n#define FIRMWARE_TX_SIZE %d\n", $counter, $counter); -close(FWH); -- cgit v1.2.3