From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/pcmcia/o2micro.h | 164 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 drivers/pcmcia/o2micro.h (limited to 'drivers/pcmcia/o2micro.h') diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h new file mode 100644 index 00000000000..b1f6e3d9ee0 --- /dev/null +++ b/drivers/pcmcia/o2micro.h @@ -0,0 +1,164 @@ +/* + * o2micro.h 1.13 1999/10/25 20:03:34 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in which + * case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_O2MICRO_H +#define _LINUX_O2MICRO_H + +#ifndef PCI_VENDOR_ID_O2 +#define PCI_VENDOR_ID_O2 0x1217 +#endif +#ifndef PCI_DEVICE_ID_O2_6729 +#define PCI_DEVICE_ID_O2_6729 0x6729 +#endif +#ifndef PCI_DEVICE_ID_O2_6730 +#define PCI_DEVICE_ID_O2_6730 0x673a +#endif +#ifndef PCI_DEVICE_ID_O2_6832 +#define PCI_DEVICE_ID_O2_6832 0x6832 +#endif +#ifndef PCI_DEVICE_ID_O2_6836 +#define PCI_DEVICE_ID_O2_6836 0x6836 +#endif +#ifndef PCI_DEVICE_ID_O2_6812 +#define PCI_DEVICE_ID_O2_6812 0x6872 +#endif + +/* Additional PCI configuration registers */ + +#define O2_MUX_CONTROL 0x90 /* 32 bit */ +#define O2_MUX_RING_OUT 0x0000000f +#define O2_MUX_SKTB_ACTV 0x000000f0 +#define O2_MUX_SCTA_ACTV_ENA 0x00000100 +#define O2_MUX_SCTB_ACTV_ENA 0x00000200 +#define O2_MUX_SER_IRQ_ROUTE 0x0000e000 +#define O2_MUX_SER_PCI 0x00010000 + +#define O2_MUX_SKTA_TURBO 0x000c0000 /* for 6833, 6860 */ +#define O2_MUX_SKTB_TURBO 0x00300000 +#define O2_MUX_AUX_VCC_3V 0x00400000 +#define O2_MUX_PCI_VCC_5V 0x00800000 +#define O2_MUX_PME_MUX 0x0f000000 + +/* Additional ExCA registers */ + +#define O2_MODE_A 0x38 +#define O2_MODE_A_2 0x26 /* for 6833B, 6860C */ +#define O2_MODE_A_CD_PULSE 0x04 +#define O2_MODE_A_SUSP_EDGE 0x08 +#define O2_MODE_A_HOST_SUSP 0x10 +#define O2_MODE_A_PWR_MASK 0x60 +#define O2_MODE_A_QUIET 0x80 + +#define O2_MODE_B 0x39 +#define O2_MODE_B_2 0x2e /* for 6833B, 6860C */ +#define O2_MODE_B_IDENT 0x03 +#define O2_MODE_B_ID_BSTEP 0x00 +#define O2_MODE_B_ID_CSTEP 0x01 +#define O2_MODE_B_ID_O2 0x02 +#define O2_MODE_B_VS1 0x04 +#define O2_MODE_B_VS2 0x08 +#define O2_MODE_B_IRQ15_RI 0x80 + +#define O2_MODE_C 0x3a +#define O2_MODE_C_DREQ_MASK 0x03 +#define O2_MODE_C_DREQ_INPACK 0x01 +#define O2_MODE_C_DREQ_WP 0x02 +#define O2_MODE_C_DREQ_BVD2 0x03 +#define O2_MODE_C_ZVIDEO 0x08 +#define O2_MODE_C_IREQ_SEL 0x30 +#define O2_MODE_C_MGMT_SEL 0xc0 + +#define O2_MODE_D 0x3b +#define O2_MODE_D_IRQ_MODE 0x03 +#define O2_MODE_D_PCI_CLKRUN 0x04 +#define O2_MODE_D_CB_CLKRUN 0x08 +#define O2_MODE_D_SKT_ACTV 0x20 +#define O2_MODE_D_PCI_FIFO 0x40 /* for OZ6729, OZ6730 */ +#define O2_MODE_D_W97_IRQ 0x40 +#define O2_MODE_D_ISA_IRQ 0x80 + +#define O2_MHPG_DMA 0x3c +#define O2_MHPG_CHANNEL 0x07 +#define O2_MHPG_CINT_ENA 0x08 +#define O2_MHPG_CSC_ENA 0x10 + +#define O2_FIFO_ENA 0x3d +#define O2_FIFO_ZVIDEO_3 0x08 +#define O2_FIFO_PCI_FIFO 0x10 +#define O2_FIFO_POSTWR 0x40 +#define O2_FIFO_BUFFER 0x80 + +#define O2_MODE_E 0x3e +#define O2_MODE_E_MHPG_DMA 0x01 +#define O2_MODE_E_SPKR_OUT 0x02 +#define O2_MODE_E_LED_OUT 0x08 +#define O2_MODE_E_SKTA_ACTV 0x10 + +static int o2micro_override(struct yenta_socket *socket) +{ + /* + * 'reserved' register at 0x94/D4. chaning it to 0xCA (8 bit) enables + * read prefetching which for example makes the RME Hammerfall DSP + * working. for some bridges it is at 0x94, for others at 0xD4. it's + * ok to write to both registers on all O2 bridges. + * from Eric Still, 02Micro. + */ + u8 a, b; + + if (PCI_FUNC(socket->dev->devfn) == 0) { + a = config_readb(socket, 0x94); + b = config_readb(socket, 0xD4); + + printk(KERN_INFO "Yenta O2: res at 0x94/0xD4: %02x/%02x\n", a, b); + + switch (socket->dev->device) { + case PCI_DEVICE_ID_O2_6832: + printk(KERN_INFO "Yenta O2: old bridge, not enabling read prefetch / write burst\n"); + break; + + default: + printk(KERN_INFO "Yenta O2: enabling read prefetch/write burst\n"); + config_writeb(socket, 0x94, a | 0x0a); + config_writeb(socket, 0xD4, b | 0x0a); + } + } + + return 0; +} + +static void o2micro_restore_state(struct yenta_socket *socket) +{ + /* + * as long as read prefetch is the only thing in + * o2micro_override, it's safe to call it from here + */ + o2micro_override(socket); +} + +#endif /* _LINUX_O2MICRO_H */ -- cgit v1.2.3