From 394b701ce4fbfde919a9bcbf84cb4820a7c6d47c Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Mon, 7 Nov 2005 01:00:15 -0800 Subject: [PATCH] RapidIO support: core base Adds a RapidIO subsystem to the kernel. RIO is a switched fabric interconnect used in higher-end embedded applications. The curious can look at the specs over at http://www.rapidio.org The core code implements enumeration/discovery, management of devices/resources, and interfaces for RIO drivers. There's a lot more to do to take advantages of all the hardware features. However, this should provide a good base for folks with RIO hardware to start contributing. Signed-off-by: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/Kconfig | 18 ++ drivers/rapidio/Makefile | 6 + drivers/rapidio/rio-access.c | 175 +++++++++++++++ drivers/rapidio/rio-driver.c | 229 ++++++++++++++++++++ drivers/rapidio/rio-sysfs.c | 230 ++++++++++++++++++++ drivers/rapidio/rio.c | 503 +++++++++++++++++++++++++++++++++++++++++++ drivers/rapidio/rio.h | 57 +++++ 7 files changed, 1218 insertions(+) create mode 100644 drivers/rapidio/Kconfig create mode 100644 drivers/rapidio/Makefile create mode 100644 drivers/rapidio/rio-access.c create mode 100644 drivers/rapidio/rio-driver.c create mode 100644 drivers/rapidio/rio-sysfs.c create mode 100644 drivers/rapidio/rio.c create mode 100644 drivers/rapidio/rio.h (limited to 'drivers/rapidio') diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig new file mode 100644 index 00000000000..0b2d2c3579a --- /dev/null +++ b/drivers/rapidio/Kconfig @@ -0,0 +1,18 @@ +# +# RapidIO configuration +# +config RAPIDIO_8_BIT_TRANSPORT + bool "8-bit transport addressing" + depends on RAPIDIO + ---help--- + By default, the kernel assumes a 16-bit addressed RapidIO + network. By selecting this option, the kernel will support + an 8-bit addressed network. + +config RAPIDIO_DISC_TIMEOUT + int "Discovery timeout duration (seconds)" + depends on RAPIDIO + default "30" + ---help--- + Amount of time a discovery node waits for a host to complete + enumeration beforing giving up. diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile new file mode 100644 index 00000000000..7c0e1818de5 --- /dev/null +++ b/drivers/rapidio/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for RapidIO interconnect services +# +obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o + +obj-$(CONFIG_RAPIDIO) += switches/ diff --git a/drivers/rapidio/rio-access.c b/drivers/rapidio/rio-access.c new file mode 100644 index 00000000000..b9fab2ae3a3 --- /dev/null +++ b/drivers/rapidio/rio-access.c @@ -0,0 +1,175 @@ +/* + * RapidIO configuration space access support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +/* + * These interrupt-safe spinlocks protect all accesses to RIO + * configuration space and doorbell access. + */ +static spinlock_t rio_config_lock = SPIN_LOCK_UNLOCKED; +static spinlock_t rio_doorbell_lock = SPIN_LOCK_UNLOCKED; + +/* + * Wrappers for all RIO configuration access functions. They just check + * alignment, do locking and call the low-level functions pointed to + * by rio_mport->ops. + */ + +#define RIO_8_BAD 0 +#define RIO_16_BAD (offset & 1) +#define RIO_32_BAD (offset & 3) + +/** + * RIO_LOP_READ - Generate rio_local_read_config_* functions + * @size: Size of configuration space read (8, 16, 32 bits) + * @type: C type of value argument + * @len: Length of configuration space read (1, 2, 4 bytes) + * + * Generates rio_local_read_config_* functions used to access + * configuration space registers on the local device. + */ +#define RIO_LOP_READ(size,type,len) \ +int __rio_local_read_config_##size \ + (struct rio_mport *mport, u32 offset, type *value) \ +{ \ + int res; \ + unsigned long flags; \ + u32 data = 0; \ + if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ + spin_lock_irqsave(&rio_config_lock, flags); \ + res = mport->ops->lcread(mport->id, offset, len, &data); \ + *value = (type)data; \ + spin_unlock_irqrestore(&rio_config_lock, flags); \ + return res; \ +} + +/** + * RIO_LOP_WRITE - Generate rio_local_write_config_* functions + * @size: Size of configuration space write (8, 16, 32 bits) + * @type: C type of value argument + * @len: Length of configuration space write (1, 2, 4 bytes) + * + * Generates rio_local_write_config_* functions used to access + * configuration space registers on the local device. + */ +#define RIO_LOP_WRITE(size,type,len) \ +int __rio_local_write_config_##size \ + (struct rio_mport *mport, u32 offset, type value) \ +{ \ + int res; \ + unsigned long flags; \ + if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ + spin_lock_irqsave(&rio_config_lock, flags); \ + res = mport->ops->lcwrite(mport->id, offset, len, value); \ + spin_unlock_irqrestore(&rio_config_lock, flags); \ + return res; \ +} + +RIO_LOP_READ(8, u8, 1) +RIO_LOP_READ(16, u16, 2) +RIO_LOP_READ(32, u32, 4) +RIO_LOP_WRITE(8, u8, 1) +RIO_LOP_WRITE(16, u16, 2) +RIO_LOP_WRITE(32, u32, 4) + +EXPORT_SYMBOL_GPL(__rio_local_read_config_8); +EXPORT_SYMBOL_GPL(__rio_local_read_config_16); +EXPORT_SYMBOL_GPL(__rio_local_read_config_32); +EXPORT_SYMBOL_GPL(__rio_local_write_config_8); +EXPORT_SYMBOL_GPL(__rio_local_write_config_16); +EXPORT_SYMBOL_GPL(__rio_local_write_config_32); + +/** + * RIO_OP_READ - Generate rio_mport_read_config_* functions + * @size: Size of configuration space read (8, 16, 32 bits) + * @type: C type of value argument + * @len: Length of configuration space read (1, 2, 4 bytes) + * + * Generates rio_mport_read_config_* functions used to access + * configuration space registers on the local device. + */ +#define RIO_OP_READ(size,type,len) \ +int rio_mport_read_config_##size \ + (struct rio_mport *mport, u16 destid, u8 hopcount, u32 offset, type *value) \ +{ \ + int res; \ + unsigned long flags; \ + u32 data = 0; \ + if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ + spin_lock_irqsave(&rio_config_lock, flags); \ + res = mport->ops->cread(mport->id, destid, hopcount, offset, len, &data); \ + *value = (type)data; \ + spin_unlock_irqrestore(&rio_config_lock, flags); \ + return res; \ +} + +/** + * RIO_OP_WRITE - Generate rio_mport_write_config_* functions + * @size: Size of configuration space write (8, 16, 32 bits) + * @type: C type of value argument + * @len: Length of configuration space write (1, 2, 4 bytes) + * + * Generates rio_mport_write_config_* functions used to access + * configuration space registers on the local device. + */ +#define RIO_OP_WRITE(size,type,len) \ +int rio_mport_write_config_##size \ + (struct rio_mport *mport, u16 destid, u8 hopcount, u32 offset, type value) \ +{ \ + int res; \ + unsigned long flags; \ + if (RIO_##size##_BAD) return RIO_BAD_SIZE; \ + spin_lock_irqsave(&rio_config_lock, flags); \ + res = mport->ops->cwrite(mport->id, destid, hopcount, offset, len, value); \ + spin_unlock_irqrestore(&rio_config_lock, flags); \ + return res; \ +} + +RIO_OP_READ(8, u8, 1) +RIO_OP_READ(16, u16, 2) +RIO_OP_READ(32, u32, 4) +RIO_OP_WRITE(8, u8, 1) +RIO_OP_WRITE(16, u16, 2) +RIO_OP_WRITE(32, u32, 4) + +EXPORT_SYMBOL_GPL(rio_mport_read_config_8); +EXPORT_SYMBOL_GPL(rio_mport_read_config_16); +EXPORT_SYMBOL_GPL(rio_mport_read_config_32); +EXPORT_SYMBOL_GPL(rio_mport_write_config_8); +EXPORT_SYMBOL_GPL(rio_mport_write_config_16); +EXPORT_SYMBOL_GPL(rio_mport_write_config_32); + +/** + * rio_mport_send_doorbell - Send a doorbell message + * + * @mport: RIO master port + * @destid: RIO device destination ID + * @data: Doorbell message data + * + * Send a doorbell message to a RIO device. The doorbell message + * has a 16-bit info field provided by the data argument. + */ +int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data) +{ + int res; + unsigned long flags; + + spin_lock_irqsave(&rio_doorbell_lock, flags); + res = mport->ops->dsend(mport->id, destid, data); + spin_unlock_irqrestore(&rio_doorbell_lock, flags); + + return res; +} + +EXPORT_SYMBOL_GPL(rio_mport_send_doorbell); diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c new file mode 100644 index 00000000000..dc749609699 --- /dev/null +++ b/drivers/rapidio/rio-driver.c @@ -0,0 +1,229 @@ +/* + * RapidIO driver support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include + +#include "rio.h" + +/** + * rio_match_device - Tell if a RIO device has a matching RIO device id structure + * @id: the RIO device id structure to match against + * @rdev: the RIO device structure to match against + * + * Used from driver probe and bus matching to check whether a RIO device + * matches a device id structure provided by a RIO driver. Returns the + * matching &struct rio_device_id or %NULL if there is no match. + */ +static const struct rio_device_id *rio_match_device(const struct rio_device_id + *id, + const struct rio_dev *rdev) +{ + while (id->vid || id->asm_vid) { + if (((id->vid == RIO_ANY_ID) || (id->vid == rdev->vid)) && + ((id->did == RIO_ANY_ID) || (id->did == rdev->did)) && + ((id->asm_vid == RIO_ANY_ID) + || (id->asm_vid == rdev->asm_vid)) + && ((id->asm_did == RIO_ANY_ID) + || (id->asm_did == rdev->asm_did))) + return id; + id++; + } + return NULL; +} + +/** + * rio_dev_get - Increments the reference count of the RIO device structure + * + * @rdev: RIO device being referenced + * + * Each live reference to a device should be refcounted. + * + * Drivers for RIO devices should normally record such references in + * their probe() methods, when they bind to a device, and release + * them by calling rio_dev_put(), in their disconnect() methods. + */ +struct rio_dev *rio_dev_get(struct rio_dev *rdev) +{ + if (rdev) + get_device(&rdev->dev); + + return rdev; +} + +/** + * rio_dev_put - Release a use of the RIO device structure + * + * @rdev: RIO device being disconnected + * + * Must be called when a user of a device is finished with it. + * When the last user of the device calls this function, the + * memory of the device is freed. + */ +void rio_dev_put(struct rio_dev *rdev) +{ + if (rdev) + put_device(&rdev->dev); +} + +/** + * rio_device_probe - Tell if a RIO device structure has a matching RIO + * device id structure + * @id: the RIO device id structure to match against + * @dev: the RIO device structure to match against + * + * return 0 and set rio_dev->driver when drv claims rio_dev, else error + */ +static int rio_device_probe(struct device *dev) +{ + struct rio_driver *rdrv = to_rio_driver(dev->driver); + struct rio_dev *rdev = to_rio_dev(dev); + int error = -ENODEV; + const struct rio_device_id *id; + + if (!rdev->driver && rdrv->probe) { + if (!rdrv->id_table) + return error; + id = rio_match_device(rdrv->id_table, rdev); + rio_dev_get(rdev); + if (id) + error = rdrv->probe(rdev, id); + if (error >= 0) { + rdev->driver = rdrv; + error = 0; + rio_dev_put(rdev); + } + } + return error; +} + +/** + * rio_device_remove - Remove a RIO device from the system + * + * @dev: the RIO device structure to match against + * + * Remove a RIO device from the system. If it has an associated + * driver, then run the driver remove() method. Then update + * the reference count. + */ +static int rio_device_remove(struct device *dev) +{ + struct rio_dev *rdev = to_rio_dev(dev); + struct rio_driver *rdrv = rdev->driver; + + if (rdrv) { + if (rdrv->remove) + rdrv->remove(rdev); + rdev->driver = NULL; + } + + rio_dev_put(rdev); + + return 0; +} + +/** + * rio_register_driver - register a new RIO driver + * @rdrv: the RIO driver structure to register + * + * Adds a &struct rio_driver to the list of registered drivers + * Returns a negative value on error, otherwise 0. If no error + * occurred, the driver remains registered even if no device + * was claimed during registration. + */ +int rio_register_driver(struct rio_driver *rdrv) +{ + /* initialize common driver fields */ + rdrv->driver.name = rdrv->name; + rdrv->driver.bus = &rio_bus_type; + rdrv->driver.probe = rio_device_probe; + rdrv->driver.remove = rio_device_remove; + + /* register with core */ + return driver_register(&rdrv->driver); +} + +/** + * rio_unregister_driver - unregister a RIO driver + * @rdrv: the RIO driver structure to unregister + * + * Deletes the &struct rio_driver from the list of registered RIO + * drivers, gives it a chance to clean up by calling its remove() + * function for each device it was responsible for, and marks those + * devices as driverless. + */ +void rio_unregister_driver(struct rio_driver *rdrv) +{ + driver_unregister(&rdrv->driver); +} + +/** + * rio_match_bus - Tell if a RIO device structure has a matching RIO + * driver device id structure + * @dev: the standard device structure to match against + * @drv: the standard driver structure containing the ids to match against + * + * Used by a driver to check whether a RIO device present in the + * system is in its list of supported devices. Returns 1 if + * there is a matching &struct rio_device_id or 0 if there is + * no match. + */ +static int rio_match_bus(struct device *dev, struct device_driver *drv) +{ + struct rio_dev *rdev = to_rio_dev(dev); + struct rio_driver *rdrv = to_rio_driver(drv); + const struct rio_device_id *id = rdrv->id_table; + const struct rio_device_id *found_id; + + if (!id) + goto out; + + found_id = rio_match_device(id, rdev); + + if (found_id) + return 1; + + out:return 0; +} + +static struct device rio_bus = { + .bus_id = "rapidio", +}; + +struct bus_type rio_bus_type = { + .name = "rapidio", + .match = rio_match_bus, + .dev_attrs = rio_dev_attrs +}; + +/** + * rio_bus_init - Register the RapidIO bus with the device model + * + * Registers the RIO bus device and RIO bus type with the Linux + * device model. + */ +static int __init rio_bus_init(void) +{ + if (device_register(&rio_bus) < 0) + printk("RIO: failed to register RIO bus device\n"); + return bus_register(&rio_bus_type); +} + +postcore_initcall(rio_bus_init); + +EXPORT_SYMBOL_GPL(rio_register_driver); +EXPORT_SYMBOL_GPL(rio_unregister_driver); +EXPORT_SYMBOL_GPL(rio_bus_type); +EXPORT_SYMBOL_GPL(rio_dev_get); +EXPORT_SYMBOL_GPL(rio_dev_put); diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c new file mode 100644 index 00000000000..73218a37506 --- /dev/null +++ b/drivers/rapidio/rio-sysfs.c @@ -0,0 +1,230 @@ +/* + * RapidIO sysfs attributes and support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include "rio.h" + +/* Sysfs support */ +#define rio_config_attr(field, format_string) \ +static ssize_t \ + field##_show(struct device *dev, char *buf) \ +{ \ + struct rio_dev *rdev = to_rio_dev(dev); \ + \ + return sprintf(buf, format_string, rdev->field); \ +} \ + +rio_config_attr(did, "0x%04x\n"); +rio_config_attr(vid, "0x%04x\n"); +rio_config_attr(device_rev, "0x%08x\n"); +rio_config_attr(asm_did, "0x%04x\n"); +rio_config_attr(asm_vid, "0x%04x\n"); +rio_config_attr(asm_rev, "0x%04x\n"); + +static ssize_t routes_show(struct device *dev, char *buf) +{ + struct rio_dev *rdev = to_rio_dev(dev); + char *str = buf; + int i; + + if (!rdev->rswitch) + goto out; + + for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) { + if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE) + continue; + str += + sprintf(str, "%04x %02x\n", i, + rdev->rswitch->route_table[i]); + } + + out: + return (str - buf); +} + +struct device_attribute rio_dev_attrs[] = { + __ATTR_RO(did), + __ATTR_RO(vid), + __ATTR_RO(device_rev), + __ATTR_RO(asm_did), + __ATTR_RO(asm_vid), + __ATTR_RO(asm_rev), + __ATTR_RO(routes), + __ATTR_NULL, +}; + +static ssize_t +rio_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + struct rio_dev *dev = + to_rio_dev(container_of(kobj, struct device, kobj)); + unsigned int size = 0x100; + loff_t init_off = off; + u8 *data = (u8 *) buf; + + /* Several chips lock up trying to read undefined config space */ + if (capable(CAP_SYS_ADMIN)) + size = 0x200000; + + if (off > size) + return 0; + if (off + count > size) { + size -= off; + count = size; + } else { + size = count; + } + + if ((off & 1) && size) { + u8 val; + rio_read_config_8(dev, off, &val); + data[off - init_off] = val; + off++; + size--; + } + + if ((off & 3) && size > 2) { + u16 val; + rio_read_config_16(dev, off, &val); + data[off - init_off] = (val >> 8) & 0xff; + data[off - init_off + 1] = val & 0xff; + off += 2; + size -= 2; + } + + while (size > 3) { + u32 val; + rio_read_config_32(dev, off, &val); + data[off - init_off] = (val >> 24) & 0xff; + data[off - init_off + 1] = (val >> 16) & 0xff; + data[off - init_off + 2] = (val >> 8) & 0xff; + data[off - init_off + 3] = val & 0xff; + off += 4; + size -= 4; + } + + if (size >= 2) { + u16 val; + rio_read_config_16(dev, off, &val); + data[off - init_off] = (val >> 8) & 0xff; + data[off - init_off + 1] = val & 0xff; + off += 2; + size -= 2; + } + + if (size > 0) { + u8 val; + rio_read_config_8(dev, off, &val); + data[off - init_off] = val; + off++; + --size; + } + + return count; +} + +static ssize_t +rio_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count) +{ + struct rio_dev *dev = + to_rio_dev(container_of(kobj, struct device, kobj)); + unsigned int size = count; + loff_t init_off = off; + u8 *data = (u8 *) buf; + + if (off > 0x200000) + return 0; + if (off + count > 0x200000) { + size = 0x200000 - off; + count = size; + } + + if ((off & 1) && size) { + rio_write_config_8(dev, off, data[off - init_off]); + off++; + size--; + } + + if ((off & 3) && (size > 2)) { + u16 val = data[off - init_off + 1]; + val |= (u16) data[off - init_off] << 8; + rio_write_config_16(dev, off, val); + off += 2; + size -= 2; + } + + while (size > 3) { + u32 val = data[off - init_off + 3]; + val |= (u32) data[off - init_off + 2] << 8; + val |= (u32) data[off - init_off + 1] << 16; + val |= (u32) data[off - init_off] << 24; + rio_write_config_32(dev, off, val); + off += 4; + size -= 4; + } + + if (size >= 2) { + u16 val = data[off - init_off + 1]; + val |= (u16) data[off - init_off] << 8; + rio_write_config_16(dev, off, val); + off += 2; + size -= 2; + } + + if (size) { + rio_write_config_8(dev, off, data[off - init_off]); + off++; + --size; + } + + return count; +} + +static struct bin_attribute rio_config_attr = { + .attr = { + .name = "config", + .mode = S_IRUGO | S_IWUSR, + .owner = THIS_MODULE, + }, + .size = 0x200000, + .read = rio_read_config, + .write = rio_write_config, +}; + +/** + * rio_create_sysfs_dev_files - create RIO specific sysfs files + * @rdev: device whose entries should be created + * + * Create files when @rdev is added to sysfs. + */ +int rio_create_sysfs_dev_files(struct rio_dev *rdev) +{ + sysfs_create_bin_file(&rdev->dev.kobj, &rio_config_attr); + + return 0; +} + +/** + * rio_remove_sysfs_dev_files - cleanup RIO specific sysfs files + * @rdev: device whose entries we should free + * + * Cleanup when @rdev is removed from sysfs. + */ +void rio_remove_sysfs_dev_files(struct rio_dev *rdev) +{ + sysfs_remove_bin_file(&rdev->dev.kobj, &rio_config_attr); +} diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c new file mode 100644 index 00000000000..adc299e2b07 --- /dev/null +++ b/drivers/rapidio/rio.c @@ -0,0 +1,503 @@ +/* + * RapidIO interconnect services + * (RapidIO Interconnect Specification, http://www.rapidio.org) + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "rio.h" + +static LIST_HEAD(rio_mports); + +/** + * rio_local_get_device_id - Get the base/extended device id for a port + * @port: RIO master port from which to get the deviceid + * + * Reads the base/extended device id from the local device + * implementing the master port. Returns the 8/16-bit device + * id. + */ +u16 rio_local_get_device_id(struct rio_mport *port) +{ + u32 result; + + rio_local_read_config_32(port, RIO_DID_CSR, &result); + + return (RIO_GET_DID(result)); +} + +/** + * rio_request_inb_mbox - request inbound mailbox service + * @mport: RIO master port from which to allocate the mailbox resource + * @mbox: Mailbox number to claim + * @entries: Number of entries in inbound mailbox queue + * @minb: Callback to execute when inbound message is received + * + * Requests ownership of an inbound mailbox resource and binds + * a callback function to the resource. Returns %0 on success. + */ +int rio_request_inb_mbox(struct rio_mport *mport, + int mbox, + int entries, + void (*minb) (struct rio_mport * mport, int mbox, + int slot)) +{ + int rc = 0; + + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_mbox_res(res, mbox, mbox); + + /* Make sure this mailbox isn't in use */ + if ((rc = + request_resource(&mport->riores[RIO_INB_MBOX_RESOURCE], + res)) < 0) { + kfree(res); + goto out; + } + + mport->inb_msg[mbox].res = res; + + /* Hook the inbound message callback */ + mport->inb_msg[mbox].mcback = minb; + + rc = rio_open_inb_mbox(mport, mbox, entries); + } else + rc = -ENOMEM; + + out: + return rc; +} + +/** + * rio_release_inb_mbox - release inbound mailbox message service + * @mport: RIO master port from which to release the mailbox resource + * @mbox: Mailbox number to release + * + * Releases ownership of an inbound mailbox resource. Returns 0 + * if the request has been satisfied. + */ +int rio_release_inb_mbox(struct rio_mport *mport, int mbox) +{ + rio_close_inb_mbox(mport, mbox); + + /* Release the mailbox resource */ + return release_resource(mport->inb_msg[mbox].res); +} + +/** + * rio_request_outb_mbox - request outbound mailbox service + * @mport: RIO master port from which to allocate the mailbox resource + * @mbox: Mailbox number to claim + * @entries: Number of entries in outbound mailbox queue + * @moutb: Callback to execute when outbound message is sent + * + * Requests ownership of an outbound mailbox resource and binds + * a callback function to the resource. Returns 0 on success. + */ +int rio_request_outb_mbox(struct rio_mport *mport, + int mbox, + int entries, + void (*moutb) (struct rio_mport * mport, int mbox, + int slot)) +{ + int rc = 0; + + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_mbox_res(res, mbox, mbox); + + /* Make sure this outbound mailbox isn't in use */ + if ((rc = + request_resource(&mport->riores[RIO_OUTB_MBOX_RESOURCE], + res)) < 0) { + kfree(res); + goto out; + } + + mport->outb_msg[mbox].res = res; + + /* Hook the inbound message callback */ + mport->outb_msg[mbox].mcback = moutb; + + rc = rio_open_outb_mbox(mport, mbox, entries); + } else + rc = -ENOMEM; + + out: + return rc; +} + +/** + * rio_release_outb_mbox - release outbound mailbox message service + * @mport: RIO master port from which to release the mailbox resource + * @mbox: Mailbox number to release + * + * Releases ownership of an inbound mailbox resource. Returns 0 + * if the request has been satisfied. + */ +int rio_release_outb_mbox(struct rio_mport *mport, int mbox) +{ + rio_close_outb_mbox(mport, mbox); + + /* Release the mailbox resource */ + return release_resource(mport->outb_msg[mbox].res); +} + +/** + * rio_setup_inb_dbell - bind inbound doorbell callback + * @mport: RIO master port to bind the doorbell callback + * @res: Doorbell message resource + * @dinb: Callback to execute when doorbell is received + * + * Adds a doorbell resource/callback pair into a port's + * doorbell event list. Returns 0 if the request has been + * satisfied. + */ +static int +rio_setup_inb_dbell(struct rio_mport *mport, struct resource *res, + void (*dinb) (struct rio_mport * mport, u16 src, u16 dst, + u16 info)) +{ + int rc = 0; + struct rio_dbell *dbell; + + if (!(dbell = kmalloc(sizeof(struct rio_dbell), GFP_KERNEL))) { + rc = -ENOMEM; + goto out; + } + + dbell->res = res; + dbell->dinb = dinb; + + list_add_tail(&dbell->node, &mport->dbells); + + out: + return rc; +} + +/** + * rio_request_inb_dbell - request inbound doorbell message service + * @mport: RIO master port from which to allocate the doorbell resource + * @start: Doorbell info range start + * @end: Doorbell info range end + * @dinb: Callback to execute when doorbell is received + * + * Requests ownership of an inbound doorbell resource and binds + * a callback function to the resource. Returns 0 if the request + * has been satisfied. + */ +int rio_request_inb_dbell(struct rio_mport *mport, + u16 start, + u16 end, + void (*dinb) (struct rio_mport * mport, u16 src, + u16 dst, u16 info)) +{ + int rc = 0; + + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_dbell_res(res, start, end); + + /* Make sure these doorbells aren't in use */ + if ((rc = + request_resource(&mport->riores[RIO_DOORBELL_RESOURCE], + res)) < 0) { + kfree(res); + goto out; + } + + /* Hook the doorbell callback */ + rc = rio_setup_inb_dbell(mport, res, dinb); + } else + rc = -ENOMEM; + + out: + return rc; +} + +/** + * rio_release_inb_dbell - release inbound doorbell message service + * @mport: RIO master port from which to release the doorbell resource + * @start: Doorbell info range start + * @end: Doorbell info range end + * + * Releases ownership of an inbound doorbell resource and removes + * callback from the doorbell event list. Returns 0 if the request + * has been satisfied. + */ +int rio_release_inb_dbell(struct rio_mport *mport, u16 start, u16 end) +{ + int rc = 0, found = 0; + struct rio_dbell *dbell; + + list_for_each_entry(dbell, &mport->dbells, node) { + if ((dbell->res->start == start) && (dbell->res->end == end)) { + found = 1; + break; + } + } + + /* If we can't find an exact match, fail */ + if (!found) { + rc = -EINVAL; + goto out; + } + + /* Delete from list */ + list_del(&dbell->node); + + /* Release the doorbell resource */ + rc = release_resource(dbell->res); + + /* Free the doorbell event */ + kfree(dbell); + + out: + return rc; +} + +/** + * rio_request_outb_dbell - request outbound doorbell message range + * @rdev: RIO device from which to allocate the doorbell resource + * @start: Doorbell message range start + * @end: Doorbell message range end + * + * Requests ownership of a doorbell message range. Returns a resource + * if the request has been satisfied or %NULL on failure. + */ +struct resource *rio_request_outb_dbell(struct rio_dev *rdev, u16 start, + u16 end) +{ + struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); + + if (res) { + rio_init_dbell_res(res, start, end); + + /* Make sure these doorbells aren't in use */ + if (request_resource(&rdev->riores[RIO_DOORBELL_RESOURCE], res) + < 0) { + kfree(res); + res = NULL; + } + } + + return res; +} + +/** + * rio_release_outb_dbell - release outbound doorbell message range + * @rdev: RIO device from which to release the doorbell resource + * @res: Doorbell resource to be freed + * + * Releases ownership of a doorbell message range. Returns 0 if the + * request has been satisfied. + */ +int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res) +{ + int rc = release_resource(res); + + kfree(res); + + return rc; +} + +/** + * rio_mport_get_feature - query for devices' extended features + * @port: Master port to issue transaction + * @local: Indicate a local master port or remote device access + * @destid: Destination ID of the device + * @hopcount: Number of switch hops to the device + * @ftr: Extended feature code + * + * Tell if a device supports a given RapidIO capability. + * Returns the offset of the requested extended feature + * block within the device's RIO configuration space or + * 0 in case the device does not support it. Possible + * values for @ftr: + * + * %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices + * + * %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices + * + * %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices + * + * %RIO_EFB_SER_EP_ID LP/Serial EP Devices + * + * %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices + * + * %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices + */ +u32 +rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, + u8 hopcount, int ftr) +{ + u32 asm_info, ext_ftr_ptr, ftr_header; + + if (local) + rio_local_read_config_32(port, RIO_ASM_INFO_CAR, &asm_info); + else + rio_mport_read_config_32(port, destid, hopcount, + RIO_ASM_INFO_CAR, &asm_info); + + ext_ftr_ptr = asm_info & RIO_EXT_FTR_PTR_MASK; + + while (ext_ftr_ptr) { + if (local) + rio_local_read_config_32(port, ext_ftr_ptr, + &ftr_header); + else + rio_mport_read_config_32(port, destid, hopcount, + ext_ftr_ptr, &ftr_header); + if (RIO_GET_BLOCK_ID(ftr_header) == ftr) + return ext_ftr_ptr; + if (!(ext_ftr_ptr = RIO_GET_BLOCK_PTR(ftr_header))) + break; + } + + return 0; +} + +/** + * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did + * @vid: RIO vid to match or %RIO_ANY_ID to match all vids + * @did: RIO did to match or %RIO_ANY_ID to match all dids + * @asm_vid: RIO asm_vid to match or %RIO_ANY_ID to match all asm_vids + * @asm_did: RIO asm_did to match or %RIO_ANY_ID to match all asm_dids + * @from: Previous RIO device found in search, or %NULL for new search + * + * Iterates through the list of known RIO devices. If a RIO device is + * found with a matching @vid, @did, @asm_vid, @asm_did, the reference + * count to the device is incrememted and a pointer to its device + * structure is returned. Otherwise, %NULL is returned. A new search + * is initiated by passing %NULL to the @from argument. Otherwise, if + * @from is not %NULL, searches continue from next device on the global + * list. The reference count for @from is always decremented if it is + * not %NULL. + */ +struct rio_dev *rio_get_asm(u16 vid, u16 did, + u16 asm_vid, u16 asm_did, struct rio_dev *from) +{ + struct list_head *n; + struct rio_dev *rdev; + + WARN_ON(in_interrupt()); + spin_lock(&rio_global_list_lock); + n = from ? from->global_list.next : rio_devices.next; + + while (n && (n != &rio_devices)) { + rdev = rio_dev_g(n); + if ((vid == RIO_ANY_ID || rdev->vid == vid) && + (did == RIO_ANY_ID || rdev->did == did) && + (asm_vid == RIO_ANY_ID || rdev->asm_vid == asm_vid) && + (asm_did == RIO_ANY_ID || rdev->asm_did == asm_did)) + goto exit; + n = n->next; + } + rdev = NULL; + exit: + rio_dev_put(from); + rdev = rio_dev_get(rdev); + spin_unlock(&rio_global_list_lock); + return rdev; +} + +/** + * rio_get_device - Begin or continue searching for a RIO device by vid/did + * @vid: RIO vid to match or %RIO_ANY_ID to match all vids + * @did: RIO did to match or %RIO_ANY_ID to match all dids + * @from: Previous RIO device found in search, or %NULL for new search + * + * Iterates through the list of known RIO devices. If a RIO device is + * found with a matching @vid and @did, the reference count to the + * device is incrememted and a pointer to its device structure is returned. + * Otherwise, %NULL is returned. A new search is initiated by passing %NULL + * to the @from argument. Otherwise, if @from is not %NULL, searches + * continue from next device on the global list. The reference count for + * @from is always decremented if it is not %NULL. + */ +struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from) +{ + return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from); +} + +static void rio_fixup_device(struct rio_dev *dev) +{ +} + +static int __devinit rio_init(void) +{ + struct rio_dev *dev = NULL; + + while ((dev = rio_get_device(RIO_ANY_ID, RIO_ANY_ID, dev)) != NULL) { + rio_fixup_device(dev); + } + return 0; +} + +device_initcall(rio_init); + +int rio_init_mports(void) +{ + int rc = 0; + struct rio_mport *port; + + list_for_each_entry(port, &rio_mports, node) { + if (!request_mem_region(port->iores.start, + port->iores.end - port->iores.start, + port->name)) { + printk(KERN_ERR + "RIO: Error requesting master port region %8.8lx-%8.8lx\n", + port->iores.start, port->iores.end - 1); + rc = -ENOMEM; + goto out; + } + + if (port->host_deviceid >= 0) + rio_enum_mport(port); + else + rio_disc_mport(port); + } + + out: + return rc; +} + +void rio_register_mport(struct rio_mport *port) +{ + list_add_tail(&port->node, &rio_mports); +} + +EXPORT_SYMBOL_GPL(rio_local_get_device_id); +EXPORT_SYMBOL_GPL(rio_get_device); +EXPORT_SYMBOL_GPL(rio_get_asm); +EXPORT_SYMBOL_GPL(rio_request_inb_dbell); +EXPORT_SYMBOL_GPL(rio_release_inb_dbell); +EXPORT_SYMBOL_GPL(rio_request_outb_dbell); +EXPORT_SYMBOL_GPL(rio_release_outb_dbell); +EXPORT_SYMBOL_GPL(rio_request_inb_mbox); +EXPORT_SYMBOL_GPL(rio_release_inb_mbox); +EXPORT_SYMBOL_GPL(rio_request_outb_mbox); +EXPORT_SYMBOL_GPL(rio_release_outb_mbox); diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h new file mode 100644 index 00000000000..f865a68cd3d --- /dev/null +++ b/drivers/rapidio/rio.h @@ -0,0 +1,57 @@ +/* + * RapidIO interconnect services + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +/* Functions internal to the RIO core code */ + +extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid, + u8 hopcount, int ftr); +extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); +extern int rio_enum_mport(struct rio_mport *mport); +extern int rio_disc_mport(struct rio_mport *mport); + +/* Structures internal to the RIO core code */ +extern struct device_attribute rio_dev_attrs[]; +extern spinlock_t rio_global_list_lock; + +/* Helpers internal to the RIO core code */ +#define DECLARE_RIO_ROUTE_SECTION(section, vid, did, add_hook, get_hook) \ + static struct rio_route_ops __rio_route_ops __attribute_used__ \ + __attribute__((__section__(#section))) = { vid, did, add_hook, get_hook }; + +/** + * DECLARE_RIO_ROUTE_OPS - Registers switch routing operations + * @vid: RIO vendor ID + * @did: RIO device ID + * @add_hook: Callback that adds a route entry + * @get_hook: Callback that gets a route entry + * + * Manipulating switch route tables in RIO is switch specific. This + * registers a switch by vendor and device ID with two callbacks for + * modifying and retrieving route entries in a switch. A &struct + * rio_route_ops is initialized with the ops and placed into a + * RIO-specific kernel section. + */ +#define DECLARE_RIO_ROUTE_OPS(vid, did, add_hook, get_hook) \ + DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \ + vid, did, add_hook, get_hook) + +#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT +#define RIO_GET_DID(x) ((x & 0x00ff0000) >> 16) +#define RIO_SET_DID(x) ((x & 0x000000ff) << 16) +#else +#define RIO_GET_DID(x) (x & 0xffff) +#define RIO_SET_DID(x) (x & 0xffff) +#endif -- cgit v1.2.3