From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/s390/char/tape_34xx.c | 1385 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1385 insertions(+) create mode 100644 drivers/s390/char/tape_34xx.c (limited to 'drivers/s390/char/tape_34xx.c') diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c new file mode 100644 index 00000000000..480ec87976f --- /dev/null +++ b/drivers/s390/char/tape_34xx.c @@ -0,0 +1,1385 @@ +/* + * drivers/s390/char/tape_34xx.c + * tape device discipline for 3480/3490 tapes. + * + * S390 and zSeries version + * Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Carsten Otte + * Tuan Ngo-Anh + * Martin Schwidefsky + */ + +#include +#include +#include +#include +#include + +#define TAPE_DBF_AREA tape_34xx_dbf + +#include "tape.h" +#include "tape_std.h" + +#define PRINTK_HEADER "TAPE_34XX: " + +/* + * Pointer to debug area. + */ +debug_info_t *TAPE_DBF_AREA = NULL; +EXPORT_SYMBOL(TAPE_DBF_AREA); + +enum tape_34xx_type { + tape_3480, + tape_3490, +}; + +#define TAPE34XX_FMT_3480 0 +#define TAPE34XX_FMT_3480_2_XF 1 +#define TAPE34XX_FMT_3480_XF 2 + +struct tape_34xx_block_id { + unsigned int wrap : 1; + unsigned int segment : 7; + unsigned int format : 2; + unsigned int block : 22; +}; + +/* + * A list of block ID's is used to faster seek blocks. + */ +struct tape_34xx_sbid { + struct list_head list; + struct tape_34xx_block_id bid; +}; + +static void tape_34xx_delete_sbid_from(struct tape_device *, int); + +/* + * Medium sense for 34xx tapes. There is no 'real' medium sense call. + * So we just do a normal sense. + */ +static int +tape_34xx_medium_sense(struct tape_device *device) +{ + struct tape_request *request; + unsigned char *sense; + int rc; + + request = tape_alloc_request(1, 32); + if (IS_ERR(request)) { + DBF_EXCEPTION(6, "MSEN fail\n"); + return PTR_ERR(request); + } + + request->op = TO_MSEN; + tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata); + + rc = tape_do_io_interruptible(device, request); + if (request->rc == 0) { + sense = request->cpdata; + + /* + * This isn't quite correct. But since INTERVENTION_REQUIRED + * means that the drive is 'neither ready nor on-line' it is + * only slightly inaccurate to say there is no tape loaded if + * the drive isn't online... + */ + if (sense[0] & SENSE_INTERVENTION_REQUIRED) + tape_med_state_set(device, MS_UNLOADED); + else + tape_med_state_set(device, MS_LOADED); + + if (sense[1] & SENSE_WRITE_PROTECT) + device->tape_generic_status |= GMT_WR_PROT(~0); + else + device->tape_generic_status &= ~GMT_WR_PROT(~0); + } else { + DBF_EVENT(4, "tape_34xx: medium sense failed with rc=%d\n", + request->rc); + } + tape_free_request(request); + + return rc; +} + +/* + * These functions are currently used only to schedule a medium_sense for + * later execution. This is because we get an interrupt whenever a medium + * is inserted but cannot call tape_do_io* from an interrupt context. + * Maybe that's useful for other actions we want to start from the + * interrupt handler. + */ +static void +tape_34xx_work_handler(void *data) +{ + struct { + struct tape_device *device; + enum tape_op op; + struct work_struct work; + } *p = data; + + switch(p->op) { + case TO_MSEN: + tape_34xx_medium_sense(p->device); + break; + default: + DBF_EVENT(3, "T34XX: internal error: unknown work\n"); + } + + p->device = tape_put_device(p->device); + kfree(p); +} + +static int +tape_34xx_schedule_work(struct tape_device *device, enum tape_op op) +{ + struct { + struct tape_device *device; + enum tape_op op; + struct work_struct work; + } *p; + + if ((p = kmalloc(sizeof(*p), GFP_ATOMIC)) == NULL) + return -ENOMEM; + + memset(p, 0, sizeof(*p)); + INIT_WORK(&p->work, tape_34xx_work_handler, p); + + p->device = tape_get_device_reference(device); + p->op = op; + + schedule_work(&p->work); + return 0; +} + +/* + * Done Handler is called when dev stat = DEVICE-END (successful operation) + */ +static inline int +tape_34xx_done(struct tape_request *request) +{ + DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]); + + switch (request->op) { + case TO_DSE: + case TO_RUN: + case TO_WRI: + case TO_WTM: + case TO_ASSIGN: + case TO_UNASSIGN: + tape_34xx_delete_sbid_from(request->device, 0); + break; + default: + ; + } + return TAPE_IO_SUCCESS; +} + +static inline int +tape_34xx_erp_failed(struct tape_request *request, int rc) +{ + DBF_EVENT(3, "Error recovery failed for %s (RC=%d)\n", + tape_op_verbose[request->op], rc); + return rc; +} + +static inline int +tape_34xx_erp_succeeded(struct tape_request *request) +{ + DBF_EVENT(3, "Error Recovery successful for %s\n", + tape_op_verbose[request->op]); + return tape_34xx_done(request); +} + +static inline int +tape_34xx_erp_retry(struct tape_request *request) +{ + DBF_EVENT(3, "xerp retr %s\n", tape_op_verbose[request->op]); + return TAPE_IO_RETRY; +} + +/* + * This function is called, when no request is outstanding and we get an + * interrupt + */ +static int +tape_34xx_unsolicited_irq(struct tape_device *device, struct irb *irb) +{ + if (irb->scsw.dstat == 0x85 /* READY */) { + /* A medium was inserted in the drive. */ + DBF_EVENT(6, "xuud med\n"); + tape_34xx_delete_sbid_from(device, 0); + tape_34xx_schedule_work(device, TO_MSEN); + } else { + DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id); + PRINT_WARN("Unsolicited IRQ (Device End) caught.\n"); + tape_dump_sense(device, NULL, irb); + } + return TAPE_IO_SUCCESS; +} + +/* + * Read Opposite Error Recovery Function: + * Used, when Read Forward does not work + */ +static int +tape_34xx_erp_read_opposite(struct tape_device *device, + struct tape_request *request) +{ + if (request->op == TO_RFO) { + /* + * We did read forward, but the data could not be read + * *correctly*. We transform the request to a read backward + * and try again. + */ + tape_std_read_backward(device, request); + return tape_34xx_erp_retry(request); + } + if (request->op != TO_RBA) + PRINT_ERR("read_opposite called with state:%s\n", + tape_op_verbose[request->op]); + /* + * We tried to read forward and backward, but hat no + * success -> failed. + */ + return tape_34xx_erp_failed(request, -EIO); +} + +static int +tape_34xx_erp_bug(struct tape_device *device, struct tape_request *request, + struct irb *irb, int no) +{ + if (request->op != TO_ASSIGN) { + PRINT_WARN("An unexpected condition #%d was caught in " + "tape error recovery.\n", no); + PRINT_WARN("Please report this incident.\n"); + if (request) + PRINT_WARN("Operation of tape:%s\n", + tape_op_verbose[request->op]); + tape_dump_sense(device, request, irb); + } + return tape_34xx_erp_failed(request, -EIO); +} + +/* + * Handle data overrun between cu and drive. The channel speed might + * be too slow. + */ +static int +tape_34xx_erp_overrun(struct tape_device *device, struct tape_request *request, + struct irb *irb) +{ + if (irb->ecw[3] == 0x40) { + PRINT_WARN ("Data overrun error between control-unit " + "and drive. Use a faster channel connection, " + "if possible! \n"); + return tape_34xx_erp_failed(request, -EIO); + } + return tape_34xx_erp_bug(device, request, irb, -1); +} + +/* + * Handle record sequence error. + */ +static int +tape_34xx_erp_sequence(struct tape_device *device, + struct tape_request *request, struct irb *irb) +{ + if (irb->ecw[3] == 0x41) { + /* + * cu detected incorrect block-id sequence on tape. + */ + PRINT_WARN("Illegal block-id sequence found!\n"); + return tape_34xx_erp_failed(request, -EIO); + } + /* + * Record sequence error bit is set, but erpa does not + * show record sequence error. + */ + return tape_34xx_erp_bug(device, request, irb, -2); +} + +/* + * This function analyses the tape's sense-data in case of a unit-check. + * If possible, it tries to recover from the error. Else the user is + * informed about the problem. + */ +static int +tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, + struct irb *irb) +{ + int inhibit_cu_recovery; + __u8* sense; + + inhibit_cu_recovery = (*device->modeset_byte & 0x80) ? 1 : 0; + sense = irb->ecw; + +#ifdef CONFIG_S390_TAPE_BLOCK + if (request->op == TO_BLOCK) { + /* + * Recovery for block device requests. Set the block_position + * to something invalid and retry. + */ + device->blk_data.block_position = -1; + if (request->retries-- <= 0) + return tape_34xx_erp_failed(request, -EIO); + else + return tape_34xx_erp_retry(request); + } +#endif + + if ( + sense[0] & SENSE_COMMAND_REJECT && + sense[1] & SENSE_WRITE_PROTECT + ) { + if ( + request->op == TO_DSE || + request->op == TO_WRI || + request->op == TO_WTM + ) { + /* medium is write protected */ + return tape_34xx_erp_failed(request, -EACCES); + } else { + return tape_34xx_erp_bug(device, request, irb, -3); + } + } + + /* + * Special cases for various tape-states when reaching + * end of recorded area + * + * FIXME: Maybe a special case of the special case: + * sense[0] == SENSE_EQUIPMENT_CHECK && + * sense[1] == SENSE_DRIVE_ONLINE && + * sense[3] == 0x47 (Volume Fenced) + * + * This was caused by continued FSF or FSR after an + * 'End Of Data'. + */ + if (( + sense[0] == SENSE_DATA_CHECK || + sense[0] == SENSE_EQUIPMENT_CHECK || + sense[0] == SENSE_EQUIPMENT_CHECK + SENSE_DEFERRED_UNIT_CHECK + ) && ( + sense[1] == SENSE_DRIVE_ONLINE || + sense[1] == SENSE_BEGINNING_OF_TAPE + SENSE_WRITE_MODE + )) { + switch (request->op) { + /* + * sense[0] == SENSE_DATA_CHECK && + * sense[1] == SENSE_DRIVE_ONLINE + * sense[3] == 0x36 (End Of Data) + * + * Further seeks might return a 'Volume Fenced'. + */ + case TO_FSF: + case TO_FSB: + /* Trying to seek beyond end of recorded area */ + return tape_34xx_erp_failed(request, -ENOSPC); + case TO_BSB: + return tape_34xx_erp_retry(request); + + /* + * sense[0] == SENSE_DATA_CHECK && + * sense[1] == SENSE_DRIVE_ONLINE && + * sense[3] == 0x36 (End Of Data) + */ + case TO_LBL: + /* Block could not be located. */ + tape_34xx_delete_sbid_from(device, 0); + return tape_34xx_erp_failed(request, -EIO); + + case TO_RFO: + /* Read beyond end of recorded area -> 0 bytes read */ + return tape_34xx_erp_failed(request, 0); + + /* + * sense[0] == SENSE_EQUIPMENT_CHECK && + * sense[1] == SENSE_DRIVE_ONLINE && + * sense[3] == 0x38 (Physical End Of Volume) + */ + case TO_WRI: + /* Writing at physical end of volume */ + return tape_34xx_erp_failed(request, -ENOSPC); + default: + PRINT_ERR("Invalid op in %s:%i\n", + __FUNCTION__, __LINE__); + return tape_34xx_erp_failed(request, 0); + } + } + + /* Sensing special bits */ + if (sense[0] & SENSE_BUS_OUT_CHECK) + return tape_34xx_erp_retry(request); + + if (sense[0] & SENSE_DATA_CHECK) { + /* + * hardware failure, damaged tape or improper + * operating conditions + */ + switch (sense[3]) { + case 0x23: + /* a read data check occurred */ + if ((sense[2] & SENSE_TAPE_SYNC_MODE) || + inhibit_cu_recovery) + // data check is not permanent, may be + // recovered. We always use async-mode with + // cu-recovery, so this should *never* happen. + return tape_34xx_erp_bug(device, request, + irb, -4); + + /* data check is permanent, CU recovery has failed */ + PRINT_WARN("Permanent read error\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x25: + // a write data check occurred + if ((sense[2] & SENSE_TAPE_SYNC_MODE) || + inhibit_cu_recovery) + // data check is not permanent, may be + // recovered. We always use async-mode with + // cu-recovery, so this should *never* happen. + return tape_34xx_erp_bug(device, request, + irb, -5); + + // data check is permanent, cu-recovery has failed + PRINT_WARN("Permanent write error\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x26: + /* Data Check (read opposite) occurred. */ + return tape_34xx_erp_read_opposite(device, request); + case 0x28: + /* ID-Mark at tape start couldn't be written */ + PRINT_WARN("ID-Mark could not be written.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x31: + /* Tape void. Tried to read beyond end of device. */ + PRINT_WARN("Read beyond end of recorded area.\n"); + return tape_34xx_erp_failed(request, -ENOSPC); + case 0x41: + /* Record sequence error. */ + PRINT_WARN("Invalid block-id sequence found.\n"); + return tape_34xx_erp_failed(request, -EIO); + default: + /* all data checks for 3480 should result in one of + * the above erpa-codes. For 3490, other data-check + * conditions do exist. */ + if (device->cdev->id.driver_info == tape_3480) + return tape_34xx_erp_bug(device, request, + irb, -6); + } + } + + if (sense[0] & SENSE_OVERRUN) + return tape_34xx_erp_overrun(device, request, irb); + + if (sense[1] & SENSE_RECORD_SEQUENCE_ERR) + return tape_34xx_erp_sequence(device, request, irb); + + /* Sensing erpa codes */ + switch (sense[3]) { + case 0x00: + /* Unit check with erpa code 0. Report and ignore. */ + PRINT_WARN("Non-error sense was found. " + "Unit-check will be ignored.\n"); + return TAPE_IO_SUCCESS; + case 0x21: + /* + * Data streaming not operational. CU will switch to + * interlock mode. Reissue the command. + */ + PRINT_WARN("Data streaming not operational. " + "Switching to interlock-mode.\n"); + return tape_34xx_erp_retry(request); + case 0x22: + /* + * Path equipment check. Might be drive adapter error, buffer + * error on the lower interface, internal path not usable, + * or error during cartridge load. + */ + PRINT_WARN("A path equipment check occurred. One of the " + "following conditions occurred:\n"); + PRINT_WARN("drive adapter error, buffer error on the lower " + "interface, internal path not usable, error " + "during cartridge load.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x24: + /* + * Load display check. Load display was command was issued, + * but the drive is displaying a drive check message. Can + * be threated as "device end". + */ + return tape_34xx_erp_succeeded(request); + case 0x27: + /* + * Command reject. May indicate illegal channel program or + * buffer over/underrun. Since all channel programs are + * issued by this driver and ought be correct, we assume a + * over/underrun situation and retry the channel program. + */ + return tape_34xx_erp_retry(request); + case 0x29: + /* + * Function incompatible. Either the tape is idrc compressed + * but the hardware isn't capable to do idrc, or a perform + * subsystem func is issued and the CU is not on-line. + */ + PRINT_WARN ("Function incompatible. Try to switch off idrc\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x2a: + /* + * Unsolicited environmental data. An internal counter + * overflows, we can ignore this and reissue the cmd. + */ + return tape_34xx_erp_retry(request); + case 0x2b: + /* + * Environmental data present. Indicates either unload + * completed ok or read buffered log command completed ok. + */ + if (request->op == TO_RUN) { + /* Rewind unload completed ok. */ + tape_med_state_set(device, MS_UNLOADED); + return tape_34xx_erp_succeeded(request); + } + /* tape_34xx doesn't use read buffered log commands. */ + return tape_34xx_erp_bug(device, request, irb, sense[3]); + case 0x2c: + /* + * Permanent equipment check. CU has tried recovery, but + * did not succeed. + */ + return tape_34xx_erp_failed(request, -EIO); + case 0x2d: + /* Data security erase failure. */ + if (request->op == TO_DSE) + return tape_34xx_erp_failed(request, -EIO); + /* Data security erase failure, but no such command issued. */ + return tape_34xx_erp_bug(device, request, irb, sense[3]); + case 0x2e: + /* + * Not capable. This indicates either that the drive fails + * reading the format id mark or that that format specified + * is not supported by the drive. + */ + PRINT_WARN("Drive not capable processing the tape format!\n"); + return tape_34xx_erp_failed(request, -EMEDIUMTYPE); + case 0x30: + /* The medium is write protected. */ + PRINT_WARN("Medium is write protected!\n"); + return tape_34xx_erp_failed(request, -EACCES); + case 0x32: + // Tension loss. We cannot recover this, it's an I/O error. + PRINT_WARN("The drive lost tape tension.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x33: + /* + * Load Failure. The cartridge was not inserted correctly or + * the tape is not threaded correctly. + */ + PRINT_WARN("Cartridge load failure. Reload the cartridge " + "and try again.\n"); + tape_34xx_delete_sbid_from(device, 0); + return tape_34xx_erp_failed(request, -EIO); + case 0x34: + /* + * Unload failure. The drive cannot maintain tape tension + * and control tape movement during an unload operation. + */ + PRINT_WARN("Failure during cartridge unload. " + "Please try manually.\n"); + if (request->op == TO_RUN) + return tape_34xx_erp_failed(request, -EIO); + return tape_34xx_erp_bug(device, request, irb, sense[3]); + case 0x35: + /* + * Drive equipment check. One of the following: + * - cu cannot recover from a drive detected error + * - a check code message is shown on drive display + * - the cartridge loader does not respond correctly + * - a failure occurs during an index, load, or unload cycle + */ + PRINT_WARN("Equipment check! Please check the drive and " + "the cartridge loader.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x36: + if (device->cdev->id.driver_info == tape_3490) + /* End of data. */ + return tape_34xx_erp_failed(request, -EIO); + /* This erpa is reserved for 3480 */ + return tape_34xx_erp_bug(device, request, irb, sense[3]); + case 0x37: + /* + * Tape length error. The tape is shorter than reported in + * the beginning-of-tape data. + */ + PRINT_WARN("Tape length error.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x38: + /* + * Physical end of tape. A read/write operation reached + * the physical end of tape. + */ + if (request->op==TO_WRI || + request->op==TO_DSE || + request->op==TO_WTM) + return tape_34xx_erp_failed(request, -ENOSPC); + return tape_34xx_erp_failed(request, -EIO); + case 0x39: + /* Backward at Beginning of tape. */ + return tape_34xx_erp_failed(request, -EIO); + case 0x3a: + /* Drive switched to not ready. */ + PRINT_WARN("Drive not ready. Turn the ready/not ready switch " + "to ready position and try again.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x3b: + /* Manual rewind or unload. This causes an I/O error. */ + PRINT_WARN("Medium was rewound or unloaded manually.\n"); + tape_34xx_delete_sbid_from(device, 0); + return tape_34xx_erp_failed(request, -EIO); + case 0x42: + /* + * Degraded mode. A condition that can cause degraded + * performance is detected. + */ + PRINT_WARN("Subsystem is running in degraded mode.\n"); + return tape_34xx_erp_retry(request); + case 0x43: + /* Drive not ready. */ + tape_34xx_delete_sbid_from(device, 0); + tape_med_state_set(device, MS_UNLOADED); + /* Some commands commands are successful even in this case */ + if (sense[1] & SENSE_DRIVE_ONLINE) { + switch(request->op) { + case TO_ASSIGN: + case TO_UNASSIGN: + case TO_DIS: + case TO_NOP: + return tape_34xx_done(request); + break; + default: + break; + } + } + PRINT_WARN("The drive is not ready.\n"); + return tape_34xx_erp_failed(request, -ENOMEDIUM); + case 0x44: + /* Locate Block unsuccessful. */ + if (request->op != TO_BLOCK && request->op != TO_LBL) + /* No locate block was issued. */ + return tape_34xx_erp_bug(device, request, + irb, sense[3]); + return tape_34xx_erp_failed(request, -EIO); + case 0x45: + /* The drive is assigned to a different channel path. */ + PRINT_WARN("The drive is assigned elsewhere.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x46: + /* + * Drive not on-line. Drive may be switched offline, + * the power supply may be switched off or + * the drive address may not be set correctly. + */ + PRINT_WARN("The drive is not on-line."); + return tape_34xx_erp_failed(request, -EIO); + case 0x47: + /* Volume fenced. CU reports volume integrity is lost. */ + PRINT_WARN("Volume fenced. The volume integrity is lost.\n"); + tape_34xx_delete_sbid_from(device, 0); + return tape_34xx_erp_failed(request, -EIO); + case 0x48: + /* Log sense data and retry request. */ + return tape_34xx_erp_retry(request); + case 0x49: + /* Bus out check. A parity check error on the bus was found. */ + PRINT_WARN("Bus out check. A data transfer over the bus " + "has been corrupted.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x4a: + /* Control unit erp failed. */ + PRINT_WARN("The control unit I/O error recovery failed.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x4b: + /* + * CU and drive incompatible. The drive requests micro-program + * patches, which are not available on the CU. + */ + PRINT_WARN("The drive needs microprogram patches from the " + "control unit, which are not available.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x4c: + /* + * Recovered Check-One failure. Cu develops a hardware error, + * but is able to recover. + */ + return tape_34xx_erp_retry(request); + case 0x4d: + if (device->cdev->id.driver_info == tape_3490) + /* + * Resetting event received. Since the driver does + * not support resetting event recovery (which has to + * be handled by the I/O Layer), retry our command. + */ + return tape_34xx_erp_retry(request); + /* This erpa is reserved for 3480. */ + return tape_34xx_erp_bug(device, request, irb, sense[3]); + case 0x4e: + if (device->cdev->id.driver_info == tape_3490) { + /* + * Maximum block size exceeded. This indicates, that + * the block to be written is larger than allowed for + * buffered mode. + */ + PRINT_WARN("Maximum block size for buffered " + "mode exceeded.\n"); + return tape_34xx_erp_failed(request, -ENOBUFS); + } + /* This erpa is reserved for 3480. */ + return tape_34xx_erp_bug(device, request, irb, sense[3]); + case 0x50: + /* + * Read buffered log (Overflow). CU is running in extended + * buffered log mode, and a counter overflows. This should + * never happen, since we're never running in extended + * buffered log mode. + */ + return tape_34xx_erp_retry(request); + case 0x51: + /* + * Read buffered log (EOV). EOF processing occurs while the + * CU is in extended buffered log mode. This should never + * happen, since we're never running in extended buffered + * log mode. + */ + return tape_34xx_erp_retry(request); + case 0x52: + /* End of Volume complete. Rewind unload completed ok. */ + if (request->op == TO_RUN) { + tape_med_state_set(device, MS_UNLOADED); + tape_34xx_delete_sbid_from(device, 0); + return tape_34xx_erp_succeeded(request); + } + return tape_34xx_erp_bug(device, request, irb, sense[3]); + case 0x53: + /* Global command intercept. */ + return tape_34xx_erp_retry(request); + case 0x54: + /* Channel interface recovery (temporary). */ + return tape_34xx_erp_retry(request); + case 0x55: + /* Channel interface recovery (permanent). */ + PRINT_WARN("A permanent channel interface error occurred.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x56: + /* Channel protocol error. */ + PRINT_WARN("A channel protocol error occurred.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x57: + if (device->cdev->id.driver_info == tape_3480) { + /* Attention intercept. */ + PRINT_WARN("An attention intercept occurred, " + "which will be recovered.\n"); + return tape_34xx_erp_retry(request); + } else { + /* Global status intercept. */ + PRINT_WARN("An global status intercept was received, " + "which will be recovered.\n"); + return tape_34xx_erp_retry(request); + } + case 0x5a: + /* + * Tape length incompatible. The tape inserted is too long, + * which could cause damage to the tape or the drive. + */ + PRINT_WARN("Tape Length Incompatible\n"); + PRINT_WARN("Tape length exceeds IBM enhanced capacity " + "cartdridge length or a medium\n"); + PRINT_WARN("with EC-CST identification mark has been mounted " + "in a device that writes\n"); + PRINT_WARN("3480 or 3480 XF format.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x5b: + /* Format 3480 XF incompatible */ + if (sense[1] & SENSE_BEGINNING_OF_TAPE) + /* The tape will get overwritten. */ + return tape_34xx_erp_retry(request); + PRINT_WARN("Format 3480 XF Incompatible\n"); + PRINT_WARN("Medium has been created in 3480 format. " + "To change the format writes\n"); + PRINT_WARN("must be issued at BOT.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x5c: + /* Format 3480-2 XF incompatible */ + PRINT_WARN("Format 3480-2 XF Incompatible\n"); + PRINT_WARN("Device can only read 3480 or 3480 XF format.\n"); + return tape_34xx_erp_failed(request, -EIO); + case 0x5d: + /* Tape length violation. */ + PRINT_WARN("Tape Length Violation\n"); + PRINT_WARN("The mounted tape exceeds IBM Enhanced Capacity " + "Cartdridge System Tape length.\n"); + PRINT_WARN("This may cause damage to the drive or tape when " + "processing to the EOV\n"); + return tape_34xx_erp_failed(request, -EMEDIUMTYPE); + case 0x5e: + /* Compaction algorithm incompatible. */ + PRINT_WARN("Compaction Algorithm Incompatible\n"); + PRINT_WARN("The volume is recorded using an incompatible " + "compaction algorithm,\n"); + PRINT_WARN("which is not supported by the device.\n"); + return tape_34xx_erp_failed(request, -EMEDIUMTYPE); + + /* The following erpas should have been covered earlier. */ + case 0x23: /* Read data check. */ + case 0x25: /* Write data check. */ + case 0x26: /* Data check (read opposite). */ + case 0x28: /* Write id mark check. */ + case 0x31: /* Tape void. */ + case 0x40: /* Overrun error. */ + case 0x41: /* Record sequence error. */ + /* All other erpas are reserved for future use. */ + default: + return tape_34xx_erp_bug(device, request, irb, sense[3]); + } +} + +/* + * 3480/3490 interrupt handler + */ +static int +tape_34xx_irq(struct tape_device *device, struct tape_request *request, + struct irb *irb) +{ + if (request == NULL) + return tape_34xx_unsolicited_irq(device, irb); + + if ((irb->scsw.dstat & DEV_STAT_UNIT_EXCEP) && + (irb->scsw.dstat & DEV_STAT_DEV_END) && + (request->op == TO_WRI)) { + /* Write at end of volume */ + PRINT_INFO("End of volume\n"); /* XXX */ + return tape_34xx_erp_failed(request, -ENOSPC); + } + + if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK) + return tape_34xx_unit_check(device, request, irb); + + if (irb->scsw.dstat & DEV_STAT_DEV_END) { + /* + * A unit exception occurs on skipping over a tapemark block. + */ + if (irb->scsw.dstat & DEV_STAT_UNIT_EXCEP) { + if (request->op == TO_BSB || request->op == TO_FSB) + request->rescnt++; + else + DBF_EVENT(5, "Unit Exception!\n"); + } + return tape_34xx_done(request); + } + + DBF_EVENT(6, "xunknownirq\n"); + PRINT_ERR("Unexpected interrupt.\n"); + PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]); + tape_dump_sense(device, request, irb); + return TAPE_IO_STOP; +} + +/* + * ioctl_overload + */ +static int +tape_34xx_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg) +{ + if (cmd == TAPE390_DISPLAY) { + struct display_struct disp; + + if (copy_from_user(&disp, (char __user *) arg, sizeof(disp)) != 0) + return -EFAULT; + + return tape_std_display(device, &disp); + } else + return -EINVAL; +} + +static inline void +tape_34xx_append_new_sbid(struct tape_34xx_block_id bid, struct list_head *l) +{ + struct tape_34xx_sbid * new_sbid; + + new_sbid = kmalloc(sizeof(*new_sbid), GFP_ATOMIC); + if (!new_sbid) + return; + + new_sbid->bid = bid; + list_add(&new_sbid->list, l); +} + +/* + * Build up the search block ID list. The block ID consists of a logical + * block number and a hardware specific part. The hardware specific part + * helps the tape drive to speed up searching for a specific block. + */ +static void +tape_34xx_add_sbid(struct tape_device *device, struct tape_34xx_block_id bid) +{ + struct list_head * sbid_list; + struct tape_34xx_sbid * sbid; + struct list_head * l; + + /* + * immediately return if there is no list at all or the block to add + * is located in segment 1 of wrap 0 because this position is used + * if no hardware position data is supplied. + */ + sbid_list = (struct list_head *) device->discdata; + if (!sbid_list || (bid.segment < 2 && bid.wrap == 0)) + return; + + /* + * Search the position where to insert the new entry. Hardware + * acceleration uses only the segment and wrap number. So we + * need only one entry for a specific wrap/segment combination. + * If there is a block with a lower number but the same hard- + * ware position data we just update the block number in the + * existing entry. + */ + list_for_each(l, sbid_list) { + sbid = list_entry(l, struct tape_34xx_sbid, list); + + if ( + (sbid->bid.segment == bid.segment) && + (sbid->bid.wrap == bid.wrap) + ) { + if (bid.block < sbid->bid.block) + sbid->bid = bid; + else return; + break; + } + + /* Sort in according to logical block number. */ + if (bid.block < sbid->bid.block) { + tape_34xx_append_new_sbid(bid, l->prev); + break; + } + } + /* List empty or new block bigger than last entry. */ + if (l == sbid_list) + tape_34xx_append_new_sbid(bid, l->prev); + + DBF_LH(4, "Current list is:\n"); + list_for_each(l, sbid_list) { + sbid = list_entry(l, struct tape_34xx_sbid, list); + DBF_LH(4, "%d:%03d@%05d\n", + sbid->bid.wrap, + sbid->bid.segment, + sbid->bid.block + ); + } +} + +/* + * Delete all entries from the search block ID list that belong to tape blocks + * equal or higher than the given number. + */ +static void +tape_34xx_delete_sbid_from(struct tape_device *device, int from) +{ + struct list_head * sbid_list; + struct tape_34xx_sbid * sbid; + struct list_head * l; + struct list_head * n; + + sbid_list = (struct list_head *) device->discdata; + if (!sbid_list) + return; + + list_for_each_safe(l, n, sbid_list) { + sbid = list_entry(l, struct tape_34xx_sbid, list); + if (sbid->bid.block >= from) { + DBF_LH(4, "Delete sbid %d:%03d@%05d\n", + sbid->bid.wrap, + sbid->bid.segment, + sbid->bid.block + ); + list_del(l); + kfree(sbid); + } + } +} + +/* + * Merge hardware position data into a block id. + */ +static void +tape_34xx_merge_sbid( + struct tape_device * device, + struct tape_34xx_block_id * bid +) { + struct tape_34xx_sbid * sbid; + struct tape_34xx_sbid * sbid_to_use; + struct list_head * sbid_list; + struct list_head * l; + + sbid_list = (struct list_head *) device->discdata; + bid->wrap = 0; + bid->segment = 1; + + if (!sbid_list || list_empty(sbid_list)) + return; + + sbid_to_use = NULL; + list_for_each(l, sbid_list) { + sbid = list_entry(l, struct tape_34xx_sbid, list); + + if (sbid->bid.block >= bid->block) + break; + sbid_to_use = sbid; + } + if (sbid_to_use) { + bid->wrap = sbid_to_use->bid.wrap; + bid->segment = sbid_to_use->bid.segment; + DBF_LH(4, "Use %d:%03d@%05d for %05d\n", + sbid_to_use->bid.wrap, + sbid_to_use->bid.segment, + sbid_to_use->bid.block, + bid->block + ); + } +} + +static int +tape_34xx_setup_device(struct tape_device * device) +{ + int rc; + struct list_head * discdata; + + DBF_EVENT(6, "34xx device setup\n"); + if ((rc = tape_std_assign(device)) == 0) { + if ((rc = tape_34xx_medium_sense(device)) != 0) { + DBF_LH(3, "34xx medium sense returned %d\n", rc); + } + } + discdata = kmalloc(sizeof(struct list_head), GFP_KERNEL); + if (discdata) { + INIT_LIST_HEAD(discdata); + device->discdata = discdata; + } + + return rc; +} + +static void +tape_34xx_cleanup_device(struct tape_device *device) +{ + tape_std_unassign(device); + + if (device->discdata) { + tape_34xx_delete_sbid_from(device, 0); + kfree(device->discdata); + device->discdata = NULL; + } +} + + +/* + * MTTELL: Tell block. Return the number of block relative to current file. + */ +static int +tape_34xx_mttell(struct tape_device *device, int mt_count) +{ + struct { + struct tape_34xx_block_id cbid; + struct tape_34xx_block_id dbid; + } __attribute__ ((packed)) block_id; + int rc; + + rc = tape_std_read_block_id(device, (__u64 *) &block_id); + if (rc) + return rc; + + tape_34xx_add_sbid(device, block_id.cbid); + return block_id.cbid.block; +} + +/* + * MTSEEK: seek to the specified block. + */ +static int +tape_34xx_mtseek(struct tape_device *device, int mt_count) +{ + struct tape_request *request; + struct tape_34xx_block_id * bid; + + if (mt_count > 0x3fffff) { + DBF_EXCEPTION(6, "xsee parm\n"); + return -EINVAL; + } + request = tape_alloc_request(3, 4); + if (IS_ERR(request)) + return PTR_ERR(request); + + /* setup ccws */ + request->op = TO_LBL; + bid = (struct tape_34xx_block_id *) request->cpdata; + bid->format = (*device->modeset_byte & 0x08) ? + TAPE34XX_FMT_3480_XF : TAPE34XX_FMT_3480; + bid->block = mt_count; + tape_34xx_merge_sbid(device, bid); + + tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte); + tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata); + tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL); + + /* execute it */ + return tape_do_io_free(device, request); +} + +#ifdef CONFIG_S390_TAPE_BLOCK +/* + * Tape block read for 34xx. + */ +static struct tape_request * +tape_34xx_bread(struct tape_device *device, struct request *req) +{ + struct tape_request *request; + struct ccw1 *ccw; + int count = 0, i; + unsigned off; + char *dst; + struct bio_vec *bv; + struct bio *bio; + struct tape_34xx_block_id * start_block; + + DBF_EVENT(6, "xBREDid:"); + + /* Count the number of blocks for the request. */ + rq_for_each_bio(bio, req) { + bio_for_each_segment(bv, bio, i) { + count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9); + } + } + + /* Allocate the ccw request. */ + request = tape_alloc_request(3+count+1, 8); + if (IS_ERR(request)) + return request; + + /* Setup ccws. */ + request->op = TO_BLOCK; + start_block = (struct tape_34xx_block_id *) request->cpdata; + start_block->block = req->sector >> TAPEBLOCK_HSEC_S2B; + DBF_EVENT(6, "start_block = %i\n", start_block->block); + + ccw = request->cpaddr; + ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte); + + /* + * We always setup a nop after the mode set ccw. This slot is + * used in tape_std_check_locate to insert a locate ccw if the + * current tape position doesn't match the start block to be read. + * The second nop will be filled with a read block id which is in + * turn used by tape_34xx_free_bread to populate the segment bid + * table. + */ + ccw = tape_ccw_cc(ccw, NOP, 0, NULL); + ccw = tape_ccw_cc(ccw, NOP, 0, NULL); + + rq_for_each_bio(bio, req) { + bio_for_each_segment(bv, bio, i) { + dst = kmap(bv->bv_page) + bv->bv_offset; + for (off = 0; off < bv->bv_len; + off += TAPEBLOCK_HSEC_SIZE) { + ccw->flags = CCW_FLAG_CC; + ccw->cmd_code = READ_FORWARD; + ccw->count = TAPEBLOCK_HSEC_SIZE; + set_normalized_cda(ccw, (void*) __pa(dst)); + ccw++; + dst += TAPEBLOCK_HSEC_SIZE; + } + } + } + + ccw = tape_ccw_end(ccw, NOP, 0, NULL); + DBF_EVENT(6, "xBREDccwg\n"); + return request; +} + +static void +tape_34xx_free_bread (struct tape_request *request) +{ + struct ccw1* ccw; + + ccw = request->cpaddr; + if ((ccw + 2)->cmd_code == READ_BLOCK_ID) { + struct { + struct tape_34xx_block_id cbid; + struct tape_34xx_block_id dbid; + } __attribute__ ((packed)) *rbi_data; + + rbi_data = request->cpdata; + + if (request->device) + tape_34xx_add_sbid(request->device, rbi_data->cbid); + } + + /* Last ccw is a nop and doesn't need clear_normalized_cda */ + for (; ccw->flags & CCW_FLAG_CC; ccw++) + if (ccw->cmd_code == READ_FORWARD) + clear_normalized_cda(ccw); + tape_free_request(request); +} + +/* + * check_locate is called just before the tape request is passed to + * the common io layer for execution. It has to check the current + * tape position and insert a locate ccw if it doesn't match the + * start block for the request. + */ +static void +tape_34xx_check_locate(struct tape_device *device, struct tape_request *request) +{ + struct tape_34xx_block_id * start_block; + + start_block = (struct tape_34xx_block_id *) request->cpdata; + if (start_block->block == device->blk_data.block_position) + return; + + DBF_LH(4, "Block seek(%06d+%06d)\n", start_block->block, device->bof); + start_block->wrap = 0; + start_block->segment = 1; + start_block->format = (*device->modeset_byte & 0x08) ? + TAPE34XX_FMT_3480_XF : + TAPE34XX_FMT_3480; + start_block->block = start_block->block + device->bof; + tape_34xx_merge_sbid(device, start_block); + tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata); + tape_ccw_cc(request->cpaddr + 2, READ_BLOCK_ID, 8, request->cpdata); +} +#endif + +/* + * List of 3480/3490 magnetic tape commands. + */ +static tape_mtop_fn tape_34xx_mtop[TAPE_NR_MTOPS] = { + [MTRESET] = tape_std_mtreset, + [MTFSF] = tape_std_mtfsf, + [MTBSF] = tape_std_mtbsf, + [MTFSR] = tape_std_mtfsr, + [MTBSR] = tape_std_mtbsr, + [MTWEOF] = tape_std_mtweof, + [MTREW] = tape_std_mtrew, + [MTOFFL] = tape_std_mtoffl, + [MTNOP] = tape_std_mtnop, + [MTRETEN] = tape_std_mtreten, + [MTBSFM] = tape_std_mtbsfm, + [MTFSFM] = tape_std_mtfsfm, + [MTEOM] = tape_std_mteom, + [MTERASE] = tape_std_mterase, + [MTRAS1] = NULL, + [MTRAS2] = NULL, + [MTRAS3] = NULL, + [MTSETBLK] = tape_std_mtsetblk, + [MTSETDENSITY] = NULL, + [MTSEEK] = tape_34xx_mtseek, + [MTTELL] = tape_34xx_mttell, + [MTSETDRVBUFFER] = NULL, + [MTFSS] = NULL, + [MTBSS] = NULL, + [MTWSM] = NULL, + [MTLOCK] = NULL, + [MTUNLOCK] = NULL, + [MTLOAD] = tape_std_mtload, + [MTUNLOAD] = tape_std_mtunload, + [MTCOMPRESSION] = tape_std_mtcompression, + [MTSETPART] = NULL, + [MTMKPART] = NULL +}; + +/* + * Tape discipline structure for 3480 and 3490. + */ +static struct tape_discipline tape_discipline_34xx = { + .owner = THIS_MODULE, + .setup_device = tape_34xx_setup_device, + .cleanup_device = tape_34xx_cleanup_device, + .process_eov = tape_std_process_eov, + .irq = tape_34xx_irq, + .read_block = tape_std_read_block, + .write_block = tape_std_write_block, +#ifdef CONFIG_S390_TAPE_BLOCK + .bread = tape_34xx_bread, + .free_bread = tape_34xx_free_bread, + .check_locate = tape_34xx_check_locate, +#endif + .ioctl_fn = tape_34xx_ioctl, + .mtop_array = tape_34xx_mtop +}; + +static struct ccw_device_id tape_34xx_ids[] = { + { CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), driver_info: tape_3480}, + { CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), driver_info: tape_3490}, + { /* end of list */ } +}; + +static int +tape_34xx_online(struct ccw_device *cdev) +{ + return tape_generic_online( + cdev->dev.driver_data, + &tape_discipline_34xx + ); +} + +static int +tape_34xx_offline(struct ccw_device *cdev) +{ + return tape_generic_offline(cdev->dev.driver_data); +} + +static struct ccw_driver tape_34xx_driver = { + .name = "tape_34xx", + .owner = THIS_MODULE, + .ids = tape_34xx_ids, + .probe = tape_generic_probe, + .remove = tape_generic_remove, + .set_online = tape_34xx_online, + .set_offline = tape_34xx_offline, +}; + +static int +tape_34xx_init (void) +{ + int rc; + + TAPE_DBF_AREA = debug_register ( "tape_34xx", 1, 2, 4*sizeof(long)); + debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view); +#ifdef DBF_LIKE_HELL + debug_set_level(TAPE_DBF_AREA, 6); +#endif + + DBF_EVENT(3, "34xx init: $Revision: 1.21 $\n"); + /* Register driver for 3480/3490 tapes. */ + rc = ccw_driver_register(&tape_34xx_driver); + if (rc) + DBF_EVENT(3, "34xx init failed\n"); + else + DBF_EVENT(3, "34xx registered\n"); + return rc; +} + +static void +tape_34xx_exit(void) +{ + ccw_driver_unregister(&tape_34xx_driver); + + debug_unregister(TAPE_DBF_AREA); +} + +MODULE_DEVICE_TABLE(ccw, tape_34xx_ids); +MODULE_AUTHOR("(C) 2001-2002 IBM Deutschland Entwicklung GmbH"); +MODULE_DESCRIPTION("Linux on zSeries channel attached 3480 tape " + "device driver ($Revision: 1.21 $)"); +MODULE_LICENSE("GPL"); + +module_init(tape_34xx_init); +module_exit(tape_34xx_exit); -- cgit v1.2.3