From 6684af1a07a1f88f3970bc90e5aed173d39168db Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 20 Sep 2006 15:58:32 +0200 Subject: [S390] zcrypt PCICC, PCIXCC coprocessor card ap bus drivers. Signed-off-by: Ralph Wuerthner Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/zcrypt_cca_key.h | 350 +++++++++++++++++ drivers/s390/crypto/zcrypt_pcicc.c | 630 +++++++++++++++++++++++++++++++ drivers/s390/crypto/zcrypt_pcicc.h | 176 +++++++++ drivers/s390/crypto/zcrypt_pcixcc.c | 714 +++++++++++++++++++++++++++++++++++ drivers/s390/crypto/zcrypt_pcixcc.h | 79 ++++ 5 files changed, 1949 insertions(+) create mode 100644 drivers/s390/crypto/zcrypt_cca_key.h create mode 100644 drivers/s390/crypto/zcrypt_pcicc.c create mode 100644 drivers/s390/crypto/zcrypt_pcicc.h create mode 100644 drivers/s390/crypto/zcrypt_pcixcc.c create mode 100644 drivers/s390/crypto/zcrypt_pcixcc.h (limited to 'drivers/s390/crypto') diff --git a/drivers/s390/crypto/zcrypt_cca_key.h b/drivers/s390/crypto/zcrypt_cca_key.h new file mode 100644 index 00000000000..c80f40d4419 --- /dev/null +++ b/drivers/s390/crypto/zcrypt_cca_key.h @@ -0,0 +1,350 @@ +/* + * linux/drivers/s390/crypto/zcrypt_cca_key.h + * + * zcrypt 2.0.0 + * + * Copyright (C) 2001, 2006 IBM Corporation + * Author(s): Robert Burroughs + * Eric Rossman (edrossma@us.ibm.com) + * + * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) + * Major cleanup & driver split: Martin Schwidefsky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ZCRYPT_CCA_KEY_H_ +#define _ZCRYPT_CCA_KEY_H_ + +struct T6_keyBlock_hdr { + unsigned short blen; + unsigned short ulen; + unsigned short flags; +}; + +/** + * mapping for the cca private ME key token. + * Three parts of interest here: the header, the private section and + * the public section. + * + * mapping for the cca key token header + */ +struct cca_token_hdr { + unsigned char token_identifier; + unsigned char version; + unsigned short token_length; + unsigned char reserved[4]; +} __attribute__((packed)); + +#define CCA_TKN_HDR_ID_EXT 0x1E + +/** + * mapping for the cca private ME section + */ +struct cca_private_ext_ME_sec { + unsigned char section_identifier; + unsigned char version; + unsigned short section_length; + unsigned char private_key_hash[20]; + unsigned char reserved1[4]; + unsigned char key_format; + unsigned char reserved2; + unsigned char key_name_hash[20]; + unsigned char key_use_flags[4]; + unsigned char reserved3[6]; + unsigned char reserved4[24]; + unsigned char confounder[24]; + unsigned char exponent[128]; + unsigned char modulus[128]; +} __attribute__((packed)); + +#define CCA_PVT_USAGE_ALL 0x80 + +/** + * mapping for the cca public section + * In a private key, the modulus doesn't appear in the public + * section. So, an arbitrary public exponent of 0x010001 will be + * used, for a section length of 0x0F always. + */ +struct cca_public_sec { + unsigned char section_identifier; + unsigned char version; + unsigned short section_length; + unsigned char reserved[2]; + unsigned short exponent_len; + unsigned short modulus_bit_len; + unsigned short modulus_byte_len; /* In a private key, this is 0 */ +} __attribute__((packed)); + +/** + * mapping for the cca private CRT key 'token' + * The first three parts (the only parts considered in this release) + * are: the header, the private section and the public section. + * The header and public section are the same as for the + * struct cca_private_ext_ME + * + * Following the structure are the quantities p, q, dp, dq, u, pad, + * and modulus, in that order, where pad_len is the modulo 8 + * complement of the residue modulo 8 of the sum of + * (p_len + q_len + dp_len + dq_len + u_len). + */ +struct cca_pvt_ext_CRT_sec { + unsigned char section_identifier; + unsigned char version; + unsigned short section_length; + unsigned char private_key_hash[20]; + unsigned char reserved1[4]; + unsigned char key_format; + unsigned char reserved2; + unsigned char key_name_hash[20]; + unsigned char key_use_flags[4]; + unsigned short p_len; + unsigned short q_len; + unsigned short dp_len; + unsigned short dq_len; + unsigned short u_len; + unsigned short mod_len; + unsigned char reserved3[4]; + unsigned short pad_len; + unsigned char reserved4[52]; + unsigned char confounder[8]; +} __attribute__((packed)); + +#define CCA_PVT_EXT_CRT_SEC_ID_PVT 0x08 +#define CCA_PVT_EXT_CRT_SEC_FMT_CL 0x40 + +/** + * Set up private key fields of a type6 MEX message. + * Note that all numerics in the key token are big-endian, + * while the entries in the key block header are little-endian. + * + * @mex: pointer to user input data + * @p: pointer to memory area for the key + * + * Returns the size of the key area or -EFAULT + */ +static inline int zcrypt_type6_mex_key_de(struct ica_rsa_modexpo *mex, + void *p, int big_endian) +{ + static struct cca_token_hdr static_pvt_me_hdr = { + .token_identifier = 0x1E, + .token_length = 0x0183, + }; + static struct cca_private_ext_ME_sec static_pvt_me_sec = { + .section_identifier = 0x02, + .section_length = 0x016C, + .key_use_flags = {0x80,0x00,0x00,0x00}, + }; + static struct cca_public_sec static_pub_me_sec = { + .section_identifier = 0x04, + .section_length = 0x000F, + .exponent_len = 0x0003, + }; + static char pk_exponent[3] = { 0x01, 0x00, 0x01 }; + struct { + struct T6_keyBlock_hdr t6_hdr; + struct cca_token_hdr pvtMeHdr; + struct cca_private_ext_ME_sec pvtMeSec; + struct cca_public_sec pubMeSec; + char exponent[3]; + } __attribute__((packed)) *key = p; + unsigned char *temp; + + memset(key, 0, sizeof(*key)); + + if (big_endian) { + key->t6_hdr.blen = cpu_to_be16(0x189); + key->t6_hdr.ulen = cpu_to_be16(0x189 - 2); + } else { + key->t6_hdr.blen = cpu_to_le16(0x189); + key->t6_hdr.ulen = cpu_to_le16(0x189 - 2); + } + key->pvtMeHdr = static_pvt_me_hdr; + key->pvtMeSec = static_pvt_me_sec; + key->pubMeSec = static_pub_me_sec; + /** + * In a private key, the modulus doesn't appear in the public + * section. So, an arbitrary public exponent of 0x010001 will be + * used. + */ + memcpy(key->exponent, pk_exponent, 3); + + /* key parameter block */ + temp = key->pvtMeSec.exponent + + sizeof(key->pvtMeSec.exponent) - mex->inputdatalength; + if (copy_from_user(temp, mex->b_key, mex->inputdatalength)) + return -EFAULT; + + /* modulus */ + temp = key->pvtMeSec.modulus + + sizeof(key->pvtMeSec.modulus) - mex->inputdatalength; + if (copy_from_user(temp, mex->n_modulus, mex->inputdatalength)) + return -EFAULT; + key->pubMeSec.modulus_bit_len = 8 * mex->inputdatalength; + return sizeof(*key); +} + +/** + * Set up private key fields of a type6 MEX message. The _pad variant + * strips leading zeroes from the b_key. + * Note that all numerics in the key token are big-endian, + * while the entries in the key block header are little-endian. + * + * @mex: pointer to user input data + * @p: pointer to memory area for the key + * + * Returns the size of the key area or -EFAULT + */ +static inline int zcrypt_type6_mex_key_en(struct ica_rsa_modexpo *mex, + void *p, int big_endian) +{ + static struct cca_token_hdr static_pub_hdr = { + .token_identifier = 0x1E, + }; + static struct cca_public_sec static_pub_sec = { + .section_identifier = 0x04, + }; + struct { + struct T6_keyBlock_hdr t6_hdr; + struct cca_token_hdr pubHdr; + struct cca_public_sec pubSec; + char exponent[0]; + } __attribute__((packed)) *key = p; + unsigned char *temp; + int i; + + memset(key, 0, sizeof(*key)); + + key->pubHdr = static_pub_hdr; + key->pubSec = static_pub_sec; + + /* key parameter block */ + temp = key->exponent; + if (copy_from_user(temp, mex->b_key, mex->inputdatalength)) + return -EFAULT; + /* Strip leading zeroes from b_key. */ + for (i = 0; i < mex->inputdatalength; i++) + if (temp[i]) + break; + if (i >= mex->inputdatalength) + return -EINVAL; + memmove(temp, temp + i, mex->inputdatalength - i); + temp += mex->inputdatalength - i; + /* modulus */ + if (copy_from_user(temp, mex->n_modulus, mex->inputdatalength)) + return -EFAULT; + + key->pubSec.modulus_bit_len = 8 * mex->inputdatalength; + key->pubSec.modulus_byte_len = mex->inputdatalength; + key->pubSec.exponent_len = mex->inputdatalength - i; + key->pubSec.section_length = sizeof(key->pubSec) + + 2*mex->inputdatalength - i; + key->pubHdr.token_length = + key->pubSec.section_length + sizeof(key->pubHdr); + if (big_endian) { + key->t6_hdr.ulen = cpu_to_be16(key->pubHdr.token_length + 4); + key->t6_hdr.blen = cpu_to_be16(key->pubHdr.token_length + 6); + } else { + key->t6_hdr.ulen = cpu_to_le16(key->pubHdr.token_length + 4); + key->t6_hdr.blen = cpu_to_le16(key->pubHdr.token_length + 6); + } + return sizeof(*key) + 2*mex->inputdatalength - i; +} + +/** + * Set up private key fields of a type6 CRT message. + * Note that all numerics in the key token are big-endian, + * while the entries in the key block header are little-endian. + * + * @mex: pointer to user input data + * @p: pointer to memory area for the key + * + * Returns the size of the key area or -EFAULT + */ +static inline int zcrypt_type6_crt_key(struct ica_rsa_modexpo_crt *crt, + void *p, int big_endian) +{ + static struct cca_public_sec static_cca_pub_sec = { + .section_identifier = 4, + .section_length = 0x000f, + .exponent_len = 0x0003, + }; + static char pk_exponent[3] = { 0x01, 0x00, 0x01 }; + struct { + struct T6_keyBlock_hdr t6_hdr; + struct cca_token_hdr token; + struct cca_pvt_ext_CRT_sec pvt; + char key_parts[0]; + } __attribute__((packed)) *key = p; + struct cca_public_sec *pub; + int short_len, long_len, pad_len, key_len, size; + + memset(key, 0, sizeof(*key)); + + short_len = crt->inputdatalength / 2; + long_len = short_len + 8; + pad_len = -(3*long_len + 2*short_len) & 7; + key_len = 3*long_len + 2*short_len + pad_len + crt->inputdatalength; + size = sizeof(*key) + key_len + sizeof(*pub) + 3; + + /* parameter block.key block */ + if (big_endian) { + key->t6_hdr.blen = cpu_to_be16(size); + key->t6_hdr.ulen = cpu_to_be16(size - 2); + } else { + key->t6_hdr.blen = cpu_to_le16(size); + key->t6_hdr.ulen = cpu_to_le16(size - 2); + } + + /* key token header */ + key->token.token_identifier = CCA_TKN_HDR_ID_EXT; + key->token.token_length = size - 6; + + /* private section */ + key->pvt.section_identifier = CCA_PVT_EXT_CRT_SEC_ID_PVT; + key->pvt.section_length = sizeof(key->pvt) + key_len; + key->pvt.key_format = CCA_PVT_EXT_CRT_SEC_FMT_CL; + key->pvt.key_use_flags[0] = CCA_PVT_USAGE_ALL; + key->pvt.p_len = key->pvt.dp_len = key->pvt.u_len = long_len; + key->pvt.q_len = key->pvt.dq_len = short_len; + key->pvt.mod_len = crt->inputdatalength; + key->pvt.pad_len = pad_len; + + /* key parts */ + if (copy_from_user(key->key_parts, crt->np_prime, long_len) || + copy_from_user(key->key_parts + long_len, + crt->nq_prime, short_len) || + copy_from_user(key->key_parts + long_len + short_len, + crt->bp_key, long_len) || + copy_from_user(key->key_parts + 2*long_len + short_len, + crt->bq_key, short_len) || + copy_from_user(key->key_parts + 2*long_len + 2*short_len, + crt->u_mult_inv, long_len)) + return -EFAULT; + memset(key->key_parts + 3*long_len + 2*short_len + pad_len, + 0xff, crt->inputdatalength); + pub = (struct cca_public_sec *)(key->key_parts + key_len); + *pub = static_cca_pub_sec; + pub->modulus_bit_len = 8 * crt->inputdatalength; + /** + * In a private key, the modulus doesn't appear in the public + * section. So, an arbitrary public exponent of 0x010001 will be + * used. + */ + memcpy((char *) (pub + 1), pk_exponent, 3); + return size; +} + +#endif /* _ZCRYPT_CCA_KEY_H_ */ diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c new file mode 100644 index 00000000000..900362983fe --- /dev/null +++ b/drivers/s390/crypto/zcrypt_pcicc.c @@ -0,0 +1,630 @@ +/* + * linux/drivers/s390/crypto/zcrypt_pcicc.c + * + * zcrypt 2.0.0 + * + * Copyright (C) 2001, 2006 IBM Corporation + * Author(s): Robert Burroughs + * Eric Rossman (edrossma@us.ibm.com) + * + * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) + * Major cleanup & driver split: Martin Schwidefsky + * Ralph Wuerthner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "ap_bus.h" +#include "zcrypt_api.h" +#include "zcrypt_error.h" +#include "zcrypt_pcicc.h" +#include "zcrypt_cca_key.h" + +#define PCICC_MIN_MOD_SIZE 64 /* 512 bits */ +#define PCICC_MAX_MOD_SIZE_OLD 128 /* 1024 bits */ +#define PCICC_MAX_MOD_SIZE 256 /* 2048 bits */ + +/** + * PCICC cards need a speed rating of 0. This keeps them at the end of + * the zcrypt device list (see zcrypt_api.c). PCICC cards are only + * used if no other cards are present because they are slow and can only + * cope with PKCS12 padded requests. The logic is queer. PKCS11 padded + * requests are rejected. The modexpo function encrypts PKCS12 padded data + * and decrypts any non-PKCS12 padded data (except PKCS11) in the assumption + * that it's encrypted PKCS12 data. The modexpo_crt function always decrypts + * the data in the assumption that its PKCS12 encrypted data. + */ +#define PCICC_SPEED_RATING 0 + +#define PCICC_MAX_MESSAGE_SIZE 0x710 /* max size type6 v1 crt message */ +#define PCICC_MAX_RESPONSE_SIZE 0x710 /* max size type86 v1 reply */ + +#define PCICC_CLEANUP_TIME (15*HZ) + +static struct ap_device_id zcrypt_pcicc_ids[] = { + { AP_DEVICE(AP_DEVICE_TYPE_PCICC) }, + { /* end of list */ }, +}; + +#ifndef CONFIG_ZCRYPT_MONOLITHIC +MODULE_DEVICE_TABLE(ap, zcrypt_pcicc_ids); +MODULE_AUTHOR("IBM Corporation"); +MODULE_DESCRIPTION("PCICC Cryptographic Coprocessor device driver, " + "Copyright 2001, 2006 IBM Corporation"); +MODULE_LICENSE("GPL"); +#endif + +static int zcrypt_pcicc_probe(struct ap_device *ap_dev); +static void zcrypt_pcicc_remove(struct ap_device *ap_dev); +static void zcrypt_pcicc_receive(struct ap_device *, struct ap_message *, + struct ap_message *); + +static struct ap_driver zcrypt_pcicc_driver = { + .probe = zcrypt_pcicc_probe, + .remove = zcrypt_pcicc_remove, + .receive = zcrypt_pcicc_receive, + .ids = zcrypt_pcicc_ids, +}; + +/** + * The following is used to initialize the CPRB passed to the PCICC card + * in a type6 message. The 3 fields that must be filled in at execution + * time are req_parml, rpl_parml and usage_domain. Note that all three + * fields are *little*-endian. Actually, everything about this interface + * is ascii/little-endian, since the device has 'Intel inside'. + * + * The CPRB is followed immediately by the parm block. + * The parm block contains: + * - function code ('PD' 0x5044 or 'PK' 0x504B) + * - rule block (0x0A00 'PKCS-1.2' or 0x0A00 'ZERO-PAD') + * - VUD block + */ +static struct CPRB static_cprb = { + .cprb_len = __constant_cpu_to_le16(0x0070), + .cprb_ver_id = 0x41, + .func_id = {0x54,0x32}, + .checkpoint_flag= 0x01, + .svr_namel = __constant_cpu_to_le16(0x0008), + .svr_name = {'I','C','S','F',' ',' ',' ',' '} +}; + +/** + * Check the message for PKCS11 padding. + */ +static inline int is_PKCS11_padded(unsigned char *buffer, int length) +{ + int i; + if ((buffer[0] != 0x00) || (buffer[1] != 0x01)) + return 0; + for (i = 2; i < length; i++) + if (buffer[i] != 0xFF) + break; + if (i < 10 || i == length) + return 0; + if (buffer[i] != 0x00) + return 0; + return 1; +} + +/** + * Check the message for PKCS12 padding. + */ +static inline int is_PKCS12_padded(unsigned char *buffer, int length) +{ + int i; + if ((buffer[0] != 0x00) || (buffer[1] != 0x02)) + return 0; + for (i = 2; i < length; i++) + if (buffer[i] == 0x00) + break; + if ((i < 10) || (i == length)) + return 0; + if (buffer[i] != 0x00) + return 0; + return 1; +} + +/** + * Convert a ICAMEX message to a type6 MEX message. + * + * @zdev: crypto device pointer + * @zreq: crypto request pointer + * @mex: pointer to user input data + * + * Returns 0 on success or -EFAULT. + */ +static int ICAMEX_msg_to_type6MEX_msg(struct zcrypt_device *zdev, + struct ap_message *ap_msg, + struct ica_rsa_modexpo *mex) +{ + static struct type6_hdr static_type6_hdr = { + .type = 0x06, + .offset1 = 0x00000058, + .agent_id = {0x01,0x00,0x43,0x43,0x41,0x2D,0x41,0x50, + 0x50,0x4C,0x20,0x20,0x20,0x01,0x01,0x01}, + .function_code = {'P','K'}, + }; + static struct function_and_rules_block static_pke_function_and_rules ={ + .function_code = {'P','K'}, + .ulen = __constant_cpu_to_le16(10), + .only_rule = {'P','K','C','S','-','1','.','2'} + }; + struct { + struct type6_hdr hdr; + struct CPRB cprb; + struct function_and_rules_block fr; + unsigned short length; + char text[0]; + } __attribute__((packed)) *msg = ap_msg->message; + int vud_len, pad_len, size; + + /* VUD.ciphertext */ + if (copy_from_user(msg->text, mex->inputdata, mex->inputdatalength)) + return -EFAULT; + + if (is_PKCS11_padded(msg->text, mex->inputdatalength)) + return -EINVAL; + + /* static message header and f&r */ + msg->hdr = static_type6_hdr; + msg->fr = static_pke_function_and_rules; + + if (is_PKCS12_padded(msg->text, mex->inputdatalength)) { + /* strip the padding and adjust the data length */ + pad_len = strnlen(msg->text + 2, mex->inputdatalength - 2) + 3; + if (pad_len <= 9 || pad_len >= mex->inputdatalength) + return -ENODEV; + vud_len = mex->inputdatalength - pad_len; + memmove(msg->text, msg->text + pad_len, vud_len); + msg->length = cpu_to_le16(vud_len + 2); + + /* Set up key after the variable length text. */ + size = zcrypt_type6_mex_key_en(mex, msg->text + vud_len, 0); + if (size < 0) + return size; + size += sizeof(*msg) + vud_len; /* total size of msg */ + } else { + vud_len = mex->inputdatalength; + msg->length = cpu_to_le16(2 + vud_len); + + msg->hdr.function_code[1] = 'D'; + msg->fr.function_code[1] = 'D'; + + /* Set up key after the variable length text. */ + size = zcrypt_type6_mex_key_de(mex, msg->text + vud_len, 0); + if (size < 0) + return size; + size += sizeof(*msg) + vud_len; /* total size of msg */ + } + + /* message header, cprb and f&r */ + msg->hdr.ToCardLen1 = (size - sizeof(msg->hdr) + 3) & -4; + msg->hdr.FromCardLen1 = PCICC_MAX_RESPONSE_SIZE - sizeof(msg->hdr); + + msg->cprb = static_cprb; + msg->cprb.usage_domain[0]= AP_QID_QUEUE(zdev->ap_dev->qid); + msg->cprb.req_parml = cpu_to_le16(size - sizeof(msg->hdr) - + sizeof(msg->cprb)); + msg->cprb.rpl_parml = cpu_to_le16(msg->hdr.FromCardLen1); + + ap_msg->length = (size + 3) & -4; + return 0; +} + +/** + * Convert a ICACRT message to a type6 CRT message. + * + * @zdev: crypto device pointer + * @zreq: crypto request pointer + * @crt: pointer to user input data + * + * Returns 0 on success or -EFAULT. + */ +static int ICACRT_msg_to_type6CRT_msg(struct zcrypt_device *zdev, + struct ap_message *ap_msg, + struct ica_rsa_modexpo_crt *crt) +{ + static struct type6_hdr static_type6_hdr = { + .type = 0x06, + .offset1 = 0x00000058, + .agent_id = {0x01,0x00,0x43,0x43,0x41,0x2D,0x41,0x50, + 0x50,0x4C,0x20,0x20,0x20,0x01,0x01,0x01}, + .function_code = {'P','D'}, + }; + static struct function_and_rules_block static_pkd_function_and_rules ={ + .function_code = {'P','D'}, + .ulen = __constant_cpu_to_le16(10), + .only_rule = {'P','K','C','S','-','1','.','2'} + }; + struct { + struct type6_hdr hdr; + struct CPRB cprb; + struct function_and_rules_block fr; + unsigned short length; + char text[0]; + } __attribute__((packed)) *msg = ap_msg->message; + int size; + + /* VUD.ciphertext */ + msg->length = cpu_to_le16(2 + crt->inputdatalength); + if (copy_from_user(msg->text, crt->inputdata, crt->inputdatalength)) + return -EFAULT; + + if (is_PKCS11_padded(msg->text, crt->inputdatalength)) + return -EINVAL; + + /* Set up key after the variable length text. */ + size = zcrypt_type6_crt_key(crt, msg->text + crt->inputdatalength, 0); + if (size < 0) + return size; + size += sizeof(*msg) + crt->inputdatalength; /* total size of msg */ + + /* message header, cprb and f&r */ + msg->hdr = static_type6_hdr; + msg->hdr.ToCardLen1 = (size - sizeof(msg->hdr) + 3) & -4; + msg->hdr.FromCardLen1 = PCICC_MAX_RESPONSE_SIZE - sizeof(msg->hdr); + + msg->cprb = static_cprb; + msg->cprb.usage_domain[0] = AP_QID_QUEUE(zdev->ap_dev->qid); + msg->cprb.req_parml = msg->cprb.rpl_parml = + cpu_to_le16(size - sizeof(msg->hdr) - sizeof(msg->cprb)); + + msg->fr = static_pkd_function_and_rules; + + ap_msg->length = (size + 3) & -4; + return 0; +} + +/** + * Copy results from a type 86 reply message back to user space. + * + * @zdev: crypto device pointer + * @reply: reply AP message. + * @data: pointer to user output data + * @length: size of user output data + * + * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error. + */ +struct type86_reply { + struct type86_hdr hdr; + struct type86_fmt2_ext fmt2; + struct CPRB cprb; + unsigned char pad[4]; /* 4 byte function code/rules block ? */ + unsigned short length; + char text[0]; +} __attribute__((packed)); + +static int convert_type86(struct zcrypt_device *zdev, + struct ap_message *reply, + char __user *outputdata, + unsigned int outputdatalength) +{ + static unsigned char static_pad[] = { + 0x00,0x02, + 0x1B,0x7B,0x5D,0xB5,0x75,0x01,0x3D,0xFD, + 0x8D,0xD1,0xC7,0x03,0x2D,0x09,0x23,0x57, + 0x89,0x49,0xB9,0x3F,0xBB,0x99,0x41,0x5B, + 0x75,0x21,0x7B,0x9D,0x3B,0x6B,0x51,0x39, + 0xBB,0x0D,0x35,0xB9,0x89,0x0F,0x93,0xA5, + 0x0B,0x47,0xF1,0xD3,0xBB,0xCB,0xF1,0x9D, + 0x23,0x73,0x71,0xFF,0xF3,0xF5,0x45,0xFB, + 0x61,0x29,0x23,0xFD,0xF1,0x29,0x3F,0x7F, + 0x17,0xB7,0x1B,0xA9,0x19,0xBD,0x57,0xA9, + 0xD7,0x95,0xA3,0xCB,0xED,0x1D,0xDB,0x45, + 0x7D,0x11,0xD1,0x51,0x1B,0xED,0x71,0xE9, + 0xB1,0xD1,0xAB,0xAB,0x21,0x2B,0x1B,0x9F, + 0x3B,0x9F,0xF7,0xF7,0xBD,0x63,0xEB,0xAD, + 0xDF,0xB3,0x6F,0x5B,0xDB,0x8D,0xA9,0x5D, + 0xE3,0x7D,0x77,0x49,0x47,0xF5,0xA7,0xFD, + 0xAB,0x2F,0x27,0x35,0x77,0xD3,0x49,0xC9, + 0x09,0xEB,0xB1,0xF9,0xBF,0x4B,0xCB,0x2B, + 0xEB,0xEB,0x05,0xFF,0x7D,0xC7,0x91,0x8B, + 0x09,0x83,0xB9,0xB9,0x69,0x33,0x39,0x6B, + 0x79,0x75,0x19,0xBF,0xBB,0x07,0x1D,0xBD, + 0x29,0xBF,0x39,0x95,0x93,0x1D,0x35,0xC7, + 0xC9,0x4D,0xE5,0x97,0x0B,0x43,0x9B,0xF1, + 0x16,0x93,0x03,0x1F,0xA5,0xFB,0xDB,0xF3, + 0x27,0x4F,0x27,0x61,0x05,0x1F,0xB9,0x23, + 0x2F,0xC3,0x81,0xA9,0x23,0x71,0x55,0x55, + 0xEB,0xED,0x41,0xE5,0xF3,0x11,0xF1,0x43, + 0x69,0x03,0xBD,0x0B,0x37,0x0F,0x51,0x8F, + 0x0B,0xB5,0x89,0x5B,0x67,0xA9,0xD9,0x4F, + 0x01,0xF9,0x21,0x77,0x37,0x73,0x79,0xC5, + 0x7F,0x51,0xC1,0xCF,0x97,0xA1,0x75,0xAD, + 0x35,0x9D,0xD3,0xD3,0xA7,0x9D,0x5D,0x41, + 0x6F,0x65,0x1B,0xCF,0xA9,0x87,0x91,0x09 + }; + struct type86_reply *msg = reply->message; + unsigned short service_rc, service_rs; + unsigned int reply_len, pad_len; + char *data; + + service_rc = le16_to_cpu(msg->cprb.ccp_rtcode); + if (unlikely(service_rc != 0)) { + service_rs = le16_to_cpu(msg->cprb.ccp_rscode); + if (service_rc == 8 && service_rs == 66) { + PDEBUG("Bad block format on PCICC\n"); + return -EINVAL; + } + if (service_rc == 8 && service_rs == 65) { + PDEBUG("Probably an even modulus on PCICC\n"); + return -EINVAL; + } + if (service_rc == 8 && service_rs == 770) { + PDEBUG("Invalid key length on PCICC\n"); + zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD; + return -EAGAIN; + } + if (service_rc == 8 && service_rs == 783) { + PDEBUG("Extended bitlengths not enabled on PCICC\n"); + zdev->max_mod_size = PCICC_MAX_MOD_SIZE_OLD; + return -EAGAIN; + } + PRINTK("Unknown service rc/rs (PCICC): %d/%d\n", + service_rc, service_rs); + zdev->online = 0; + return -EAGAIN; /* repeat the request on a different device. */ + } + data = msg->text; + reply_len = le16_to_cpu(msg->length) - 2; + if (reply_len > outputdatalength) + return -EINVAL; + /** + * For all encipher requests, the length of the ciphertext (reply_len) + * will always equal the modulus length. For MEX decipher requests + * the output needs to get padded. Minimum pad size is 10. + * + * Currently, the cases where padding will be added is for: + * - PCIXCC_MCL2 using a CRT form token (since PKD didn't support + * ZERO-PAD and CRT is only supported for PKD requests) + * - PCICC, always + */ + pad_len = outputdatalength - reply_len; + if (pad_len > 0) { + if (pad_len < 10) + return -EINVAL; + /* 'restore' padding left in the PCICC/PCIXCC card. */ + if (copy_to_user(outputdata, static_pad, pad_len - 1)) + return -EFAULT; + if (put_user(0, outputdata + pad_len - 1)) + return -EFAULT; + } + /* Copy the crypto response to user space. */ + if (copy_to_user(outputdata + pad_len, data, reply_len)) + return -EFAULT; + return 0; +} + +static int convert_response(struct zcrypt_device *zdev, + struct ap_message *reply, + char __user *outputdata, + unsigned int outputdatalength) +{ + struct type86_reply *msg = reply->message; + + /* Response type byte is the second byte in the response. */ + switch (msg->hdr.type) { + case TYPE82_RSP_CODE: + case TYPE88_RSP_CODE: + return convert_error(zdev, reply); + case TYPE86_RSP_CODE: + if (msg->hdr.reply_code) + return convert_error(zdev, reply); + if (msg->cprb.cprb_ver_id == 0x01) + return convert_type86(zdev, reply, + outputdata, outputdatalength); + /* no break, incorrect cprb version is an unknown response */ + default: /* Unknown response type, this should NEVER EVER happen */ + PRINTK("Unrecognized Message Header: %08x%08x\n", + *(unsigned int *) reply->message, + *(unsigned int *) (reply->message+4)); + zdev->online = 0; + return -EAGAIN; /* repeat the request on a different device. */ + } +} + +/** + * This function is called from the AP bus code after a crypto request + * "msg" has finished with the reply message "reply". + * It is called from tasklet context. + * @ap_dev: pointer to the AP device + * @msg: pointer to the AP message + * @reply: pointer to the AP reply message + */ +static void zcrypt_pcicc_receive(struct ap_device *ap_dev, + struct ap_message *msg, + struct ap_message *reply) +{ + static struct error_hdr error_reply = { + .type = TYPE82_RSP_CODE, + .reply_code = REP82_ERROR_MACHINE_FAILURE, + }; + struct type86_reply *t86r = reply->message; + int length; + + /* Copy the reply message to the request message buffer. */ + if (IS_ERR(reply)) + memcpy(msg->message, &error_reply, sizeof(error_reply)); + else if (t86r->hdr.type == TYPE86_RSP_CODE && + t86r->cprb.cprb_ver_id == 0x01) { + length = sizeof(struct type86_reply) + t86r->length - 2; + length = min(PCICC_MAX_RESPONSE_SIZE, length); + memcpy(msg->message, reply->message, length); + } else + memcpy(msg->message, reply->message, sizeof error_reply); + complete((struct completion *) msg->private); +} + +static atomic_t zcrypt_step = ATOMIC_INIT(0); + +/** + * The request distributor calls this function if it picked the PCICC + * device to handle a modexpo request. + * @zdev: pointer to zcrypt_device structure that identifies the + * PCICC device to the request distributor + * @mex: pointer to the modexpo request buffer + */ +static long zcrypt_pcicc_modexpo(struct zcrypt_device *zdev, + struct ica_rsa_modexpo *mex) +{ + struct ap_message ap_msg; + struct completion work; + int rc; + + ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); + if (!ap_msg.message) + return -ENOMEM; + ap_msg.length = PAGE_SIZE; + ap_msg.psmid = (((unsigned long long) current->pid) << 32) + + atomic_inc_return(&zcrypt_step); + ap_msg.private = &work; + rc = ICAMEX_msg_to_type6MEX_msg(zdev, &ap_msg, mex); + if (rc) + goto out_free; + init_completion(&work); + ap_queue_message(zdev->ap_dev, &ap_msg); + rc = wait_for_completion_interruptible_timeout( + &work, PCICC_CLEANUP_TIME); + if (rc > 0) + rc = convert_response(zdev, &ap_msg, mex->outputdata, + mex->outputdatalength); + else { + /* Signal pending or message timed out. */ + ap_cancel_message(zdev->ap_dev, &ap_msg); + if (rc == 0) + /* Message timed out. */ + rc = -ETIME; + } +out_free: + free_page((unsigned long) ap_msg.message); + return rc; +} + +/** + * The request distributor calls this function if it picked the PCICC + * device to handle a modexpo_crt request. + * @zdev: pointer to zcrypt_device structure that identifies the + * PCICC device to the request distributor + * @crt: pointer to the modexpoc_crt request buffer + */ +static long zcrypt_pcicc_modexpo_crt(struct zcrypt_device *zdev, + struct ica_rsa_modexpo_crt *crt) +{ + struct ap_message ap_msg; + struct completion work; + int rc; + + ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); + if (!ap_msg.message) + return -ENOMEM; + ap_msg.length = PAGE_SIZE; + ap_msg.psmid = (((unsigned long long) current->pid) << 32) + + atomic_inc_return(&zcrypt_step); + ap_msg.private = &work; + rc = ICACRT_msg_to_type6CRT_msg(zdev, &ap_msg, crt); + if (rc) + goto out_free; + init_completion(&work); + ap_queue_message(zdev->ap_dev, &ap_msg); + rc = wait_for_completion_interruptible_timeout( + &work, PCICC_CLEANUP_TIME); + if (rc > 0) + rc = convert_response(zdev, &ap_msg, crt->outputdata, + crt->outputdatalength); + else { + /* Signal pending or message timed out. */ + ap_cancel_message(zdev->ap_dev, &ap_msg); + if (rc == 0) + /* Message timed out. */ + rc = -ETIME; + } +out_free: + free_page((unsigned long) ap_msg.message); + return rc; +} + +/** + * The crypto operations for a PCICC card. + */ +static struct zcrypt_ops zcrypt_pcicc_ops = { + .rsa_modexpo = zcrypt_pcicc_modexpo, + .rsa_modexpo_crt = zcrypt_pcicc_modexpo_crt, +}; + +/** + * Probe function for PCICC cards. It always accepts the AP device + * since the bus_match already checked the hardware type. + * @ap_dev: pointer to the AP device. + */ +static int zcrypt_pcicc_probe(struct ap_device *ap_dev) +{ + struct zcrypt_device *zdev; + int rc; + + zdev = zcrypt_device_alloc(PCICC_MAX_RESPONSE_SIZE); + if (!zdev) + return -ENOMEM; + zdev->ap_dev = ap_dev; + zdev->ops = &zcrypt_pcicc_ops; + zdev->online = 1; + zdev->user_space_type = ZCRYPT_PCICC; + zdev->type_string = "PCICC"; + zdev->min_mod_size = PCICC_MIN_MOD_SIZE; + zdev->max_mod_size = PCICC_MAX_MOD_SIZE; + zdev->speed_rating = PCICC_SPEED_RATING; + ap_dev->reply = &zdev->reply; + ap_dev->private = zdev; + rc = zcrypt_device_register(zdev); + if (rc) + goto out_free; + return 0; + + out_free: + ap_dev->private = NULL; + zcrypt_device_free(zdev); + return rc; +} + +/** + * This is called to remove the extended PCICC driver information + * if an AP device is removed. + */ +static void zcrypt_pcicc_remove(struct ap_device *ap_dev) +{ + struct zcrypt_device *zdev = ap_dev->private; + + zcrypt_device_unregister(zdev); +} + +int __init zcrypt_pcicc_init(void) +{ + return ap_driver_register(&zcrypt_pcicc_driver, THIS_MODULE, "pcicc"); +} + +void zcrypt_pcicc_exit(void) +{ + ap_driver_unregister(&zcrypt_pcicc_driver); +} + +#ifndef CONFIG_ZCRYPT_MONOLITHIC +module_init(zcrypt_pcicc_init); +module_exit(zcrypt_pcicc_exit); +#endif diff --git a/drivers/s390/crypto/zcrypt_pcicc.h b/drivers/s390/crypto/zcrypt_pcicc.h new file mode 100644 index 00000000000..027bafc7312 --- /dev/null +++ b/drivers/s390/crypto/zcrypt_pcicc.h @@ -0,0 +1,176 @@ +/* + * linux/drivers/s390/crypto/zcrypt_pcicc.h + * + * zcrypt 2.0.0 + * + * Copyright (C) 2001, 2006 IBM Corporation + * Author(s): Robert Burroughs + * Eric Rossman (edrossma@us.ibm.com) + * + * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) + * Major cleanup & driver split: Martin Schwidefsky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ZCRYPT_PCICC_H_ +#define _ZCRYPT_PCICC_H_ + +/** + * The type 6 message family is associated with PCICC or PCIXCC cards. + * + * It contains a message header followed by a CPRB, both of which + * are described below. + * + * Note that all reserved fields must be zeroes. + */ +struct type6_hdr { + unsigned char reserved1; /* 0x00 */ + unsigned char type; /* 0x06 */ + unsigned char reserved2[2]; /* 0x0000 */ + unsigned char right[4]; /* 0x00000000 */ + unsigned char reserved3[2]; /* 0x0000 */ + unsigned char reserved4[2]; /* 0x0000 */ + unsigned char apfs[4]; /* 0x00000000 */ + unsigned int offset1; /* 0x00000058 (offset to CPRB) */ + unsigned int offset2; /* 0x00000000 */ + unsigned int offset3; /* 0x00000000 */ + unsigned int offset4; /* 0x00000000 */ + unsigned char agent_id[16]; /* PCICC: */ + /* 0x0100 */ + /* 0x4343412d4150504c202020 */ + /* 0x010101 */ + /* PCIXCC: */ + /* 0x4341000000000000 */ + /* 0x0000000000000000 */ + unsigned char rqid[2]; /* rqid. internal to 603 */ + unsigned char reserved5[2]; /* 0x0000 */ + unsigned char function_code[2]; /* for PKD, 0x5044 (ascii 'PD') */ + unsigned char reserved6[2]; /* 0x0000 */ + unsigned int ToCardLen1; /* (request CPRB len + 3) & -4 */ + unsigned int ToCardLen2; /* db len 0x00000000 for PKD */ + unsigned int ToCardLen3; /* 0x00000000 */ + unsigned int ToCardLen4; /* 0x00000000 */ + unsigned int FromCardLen1; /* response buffer length */ + unsigned int FromCardLen2; /* db len 0x00000000 for PKD */ + unsigned int FromCardLen3; /* 0x00000000 */ + unsigned int FromCardLen4; /* 0x00000000 */ +} __attribute__((packed)); + +/** + * CPRB + * Note that all shorts, ints and longs are little-endian. + * All pointer fields are 32-bits long, and mean nothing + * + * A request CPRB is followed by a request_parameter_block. + * + * The request (or reply) parameter block is organized thus: + * function code + * VUD block + * key block + */ +struct CPRB { + unsigned short cprb_len; /* CPRB length */ + unsigned char cprb_ver_id; /* CPRB version id. */ + unsigned char pad_000; /* Alignment pad byte. */ + unsigned char srpi_rtcode[4]; /* SRPI return code LELONG */ + unsigned char srpi_verb; /* SRPI verb type */ + unsigned char flags; /* flags */ + unsigned char func_id[2]; /* function id */ + unsigned char checkpoint_flag; /* */ + unsigned char resv2; /* reserved */ + unsigned short req_parml; /* request parameter buffer */ + /* length 16-bit little endian */ + unsigned char req_parmp[4]; /* request parameter buffer * + * pointer (means nothing: the * + * parameter buffer follows * + * the CPRB). */ + unsigned char req_datal[4]; /* request data buffer */ + /* length ULELONG */ + unsigned char req_datap[4]; /* request data buffer */ + /* pointer */ + unsigned short rpl_parml; /* reply parameter buffer */ + /* length 16-bit little endian */ + unsigned char pad_001[2]; /* Alignment pad bytes. ULESHORT */ + unsigned char rpl_parmp[4]; /* reply parameter buffer * + * pointer (means nothing: the * + * parameter buffer follows * + * the CPRB). */ + unsigned char rpl_datal[4]; /* reply data buffer len ULELONG */ + unsigned char rpl_datap[4]; /* reply data buffer */ + /* pointer */ + unsigned short ccp_rscode; /* server reason code ULESHORT */ + unsigned short ccp_rtcode; /* server return code ULESHORT */ + unsigned char repd_parml[2]; /* replied parameter len ULESHORT*/ + unsigned char mac_data_len[2]; /* Mac Data Length ULESHORT */ + unsigned char repd_datal[4]; /* replied data length ULELONG */ + unsigned char req_pc[2]; /* PC identifier */ + unsigned char res_origin[8]; /* resource origin */ + unsigned char mac_value[8]; /* Mac Value */ + unsigned char logon_id[8]; /* Logon Identifier */ + unsigned char usage_domain[2]; /* cdx */ + unsigned char resv3[18]; /* reserved for requestor */ + unsigned short svr_namel; /* server name length ULESHORT */ + unsigned char svr_name[8]; /* server name */ +} __attribute__((packed)); + +/** + * The type 86 message family is associated with PCICC and PCIXCC cards. + * + * It contains a message header followed by a CPRB. The CPRB is + * the same as the request CPRB, which is described above. + * + * If format is 1, an error condition exists and no data beyond + * the 8-byte message header is of interest. + * + * The non-error message is shown below. + * + * Note that all reserved fields must be zeroes. + */ +struct type86_hdr { + unsigned char reserved1; /* 0x00 */ + unsigned char type; /* 0x86 */ + unsigned char format; /* 0x01 (error) or 0x02 (ok) */ + unsigned char reserved2; /* 0x00 */ + unsigned char reply_code; /* reply code (see above) */ + unsigned char reserved3[3]; /* 0x000000 */ +} __attribute__((packed)); + +#define TYPE86_RSP_CODE 0x86 +#define TYPE86_FMT2 0x02 + +struct type86_fmt2_ext { + unsigned char reserved[4]; /* 0x00000000 */ + unsigned char apfs[4]; /* final status */ + unsigned int count1; /* length of CPRB + parameters */ + unsigned int offset1; /* offset to CPRB */ + unsigned int count2; /* 0x00000000 */ + unsigned int offset2; /* db offset 0x00000000 for PKD */ + unsigned int count3; /* 0x00000000 */ + unsigned int offset3; /* 0x00000000 */ + unsigned int count4; /* 0x00000000 */ + unsigned int offset4; /* 0x00000000 */ +} __attribute__((packed)); + +struct function_and_rules_block { + unsigned char function_code[2]; + unsigned short ulen; + unsigned char only_rule[8]; +} __attribute__((packed)); + +int zcrypt_pcicc_init(void); +void zcrypt_pcicc_exit(void); + +#endif /* _ZCRYPT_PCICC_H_ */ diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c new file mode 100644 index 00000000000..6064cf58be4 --- /dev/null +++ b/drivers/s390/crypto/zcrypt_pcixcc.c @@ -0,0 +1,714 @@ +/* + * linux/drivers/s390/crypto/zcrypt_pcixcc.c + * + * zcrypt 2.0.0 + * + * Copyright (C) 2001, 2006 IBM Corporation + * Author(s): Robert Burroughs + * Eric Rossman (edrossma@us.ibm.com) + * + * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) + * Major cleanup & driver split: Martin Schwidefsky + * Ralph Wuerthner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include "ap_bus.h" +#include "zcrypt_api.h" +#include "zcrypt_error.h" +#include "zcrypt_pcicc.h" +#include "zcrypt_pcixcc.h" +#include "zcrypt_cca_key.h" + +#define PCIXCC_MIN_MOD_SIZE 16 /* 128 bits */ +#define PCIXCC_MIN_MOD_SIZE_OLD 64 /* 512 bits */ +#define PCIXCC_MAX_MOD_SIZE 256 /* 2048 bits */ + +#define PCIXCC_MCL2_SPEED_RATING 7870 /* FIXME: needs finetuning */ +#define PCIXCC_MCL3_SPEED_RATING 7870 +#define CEX2C_SPEED_RATING 8540 + +#define PCIXCC_MAX_ICA_MESSAGE_SIZE 0x77c /* max size type6 v2 crt message */ +#define PCIXCC_MAX_ICA_RESPONSE_SIZE 0x77c /* max size type86 v2 reply */ + +#define PCIXCC_MAX_XCRB_MESSAGE_SIZE (12*1024) +#define PCIXCC_MAX_XCRB_RESPONSE_SIZE PCIXCC_MAX_XCRB_MESSAGE_SIZE +#define PCIXCC_MAX_XCRB_DATA_SIZE (11*1024) +#define PCIXCC_MAX_XCRB_REPLY_SIZE (5*1024) + +#define PCIXCC_MAX_RESPONSE_SIZE PCIXCC_MAX_XCRB_RESPONSE_SIZE + +#define PCIXCC_CLEANUP_TIME (15*HZ) + +static struct ap_device_id zcrypt_pcixcc_ids[] = { + { AP_DEVICE(AP_DEVICE_TYPE_PCIXCC) }, + { AP_DEVICE(AP_DEVICE_TYPE_CEX2C) }, + { /* end of list */ }, +}; + +#ifndef CONFIG_ZCRYPT_MONOLITHIC +MODULE_DEVICE_TABLE(ap, zcrypt_pcixcc_ids); +MODULE_AUTHOR("IBM Corporation"); +MODULE_DESCRIPTION("PCIXCC Cryptographic Coprocessor device driver, " + "Copyright 2001, 2006 IBM Corporation"); +MODULE_LICENSE("GPL"); +#endif + +static int zcrypt_pcixcc_probe(struct ap_device *ap_dev); +static void zcrypt_pcixcc_remove(struct ap_device *ap_dev); +static void zcrypt_pcixcc_receive(struct ap_device *, struct ap_message *, + struct ap_message *); + +static struct ap_driver zcrypt_pcixcc_driver = { + .probe = zcrypt_pcixcc_probe, + .remove = zcrypt_pcixcc_remove, + .receive = zcrypt_pcixcc_receive, + .ids = zcrypt_pcixcc_ids, +}; + +/** + * The following is used to initialize the CPRBX passed to the PCIXCC/CEX2C + * card in a type6 message. The 3 fields that must be filled in at execution + * time are req_parml, rpl_parml and usage_domain. + * Everything about this interface is ascii/big-endian, since the + * device does *not* have 'Intel inside'. + * + * The CPRBX is followed immediately by the parm block. + * The parm block contains: + * - function code ('PD' 0x5044 or 'PK' 0x504B) + * - rule block (one of:) + * + 0x000A 'PKCS-1.2' (MCL2 'PD') + * + 0x000A 'ZERO-PAD' (MCL2 'PK') + * + 0x000A 'ZERO-PAD' (MCL3 'PD' or CEX2C 'PD') + * + 0x000A 'MRP ' (MCL3 'PK' or CEX2C 'PK') + * - VUD block + */ +static struct CPRBX static_cprbx = { + .cprb_len = 0x00DC, + .cprb_ver_id = 0x02, + .func_id = {0x54,0x32}, +}; + +/** + * Convert a ICAMEX message to a type6 MEX message. + * + * @zdev: crypto device pointer + * @ap_msg: pointer to AP message + * @mex: pointer to user input data + * + * Returns 0 on success or -EFAULT. + */ +static int ICAMEX_msg_to_type6MEX_msgX(struct zcrypt_device *zdev, + struct ap_message *ap_msg, + struct ica_rsa_modexpo *mex) +{ + static struct type6_hdr static_type6_hdrX = { + .type = 0x06, + .offset1 = 0x00000058, + .agent_id = {'C','A',}, + .function_code = {'P','K'}, + }; + static struct function_and_rules_block static_pke_fnr = { + .function_code = {'P','K'}, + .ulen = 10, + .only_rule = {'M','R','P',' ',' ',' ',' ',' '} + }; + static struct function_and_rules_block static_pke_fnr_MCL2 = { + .function_code = {'P','K'}, + .ulen = 10, + .only_rule = {'Z','E','R','O','-','P','A','D'} + }; + struct { + struct type6_hdr hdr; + struct CPRBX cprbx; + struct function_and_rules_block fr; + unsigned short length; + char text[0]; + } __attribute__((packed)) *msg = ap_msg->message; + int size; + + /* VUD.ciphertext */ + msg->length = mex->inputdatalength + 2; + if (copy_from_user(msg->text, mex->inputdata, mex->inputdatalength)) + return -EFAULT; + + /* Set up key which is located after the variable length text. */ + size = zcrypt_type6_mex_key_en(mex, msg->text+mex->inputdatalength, 1); + if (size < 0) + return size; + size += sizeof(*msg) + mex->inputdatalength; + + /* message header, cprbx and f&r */ + msg->hdr = static_type6_hdrX; + msg->hdr.ToCardLen1 = size - sizeof(msg->hdr); + msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr); + + msg->cprbx = static_cprbx; + msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid); + msg->cprbx.rpl_msgbl = msg->hdr.FromCardLen1; + + msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ? + static_pke_fnr_MCL2 : static_pke_fnr; + + msg->cprbx.req_parml = size - sizeof(msg->hdr) - sizeof(msg->cprbx); + + ap_msg->length = size; + return 0; +} + +/** + * Convert a ICACRT message to a type6 CRT message. + * + * @zdev: crypto device pointer + * @ap_msg: pointer to AP message + * @crt: pointer to user input data + * + * Returns 0 on success or -EFAULT. + */ +static int ICACRT_msg_to_type6CRT_msgX(struct zcrypt_device *zdev, + struct ap_message *ap_msg, + struct ica_rsa_modexpo_crt *crt) +{ + static struct type6_hdr static_type6_hdrX = { + .type = 0x06, + .offset1 = 0x00000058, + .agent_id = {'C','A',}, + .function_code = {'P','D'}, + }; + static struct function_and_rules_block static_pkd_fnr = { + .function_code = {'P','D'}, + .ulen = 10, + .only_rule = {'Z','E','R','O','-','P','A','D'} + }; + + static struct function_and_rules_block static_pkd_fnr_MCL2 = { + .function_code = {'P','D'}, + .ulen = 10, + .only_rule = {'P','K','C','S','-','1','.','2'} + }; + struct { + struct type6_hdr hdr; + struct CPRBX cprbx; + struct function_and_rules_block fr; + unsigned short length; + char text[0]; + } __attribute__((packed)) *msg = ap_msg->message; + int size; + + /* VUD.ciphertext */ + msg->length = crt->inputdatalength + 2; + if (copy_from_user(msg->text, crt->inputdata, crt->inputdatalength)) + return -EFAULT; + + /* Set up key which is located after the variable length text. */ + size = zcrypt_type6_crt_key(crt, msg->text + crt->inputdatalength, 1); + if (size < 0) + return size; + size += sizeof(*msg) + crt->inputdatalength; /* total size of msg */ + + /* message header, cprbx and f&r */ + msg->hdr = static_type6_hdrX; + msg->hdr.ToCardLen1 = size - sizeof(msg->hdr); + msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr); + + msg->cprbx = static_cprbx; + msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid); + msg->cprbx.req_parml = msg->cprbx.rpl_msgbl = + size - sizeof(msg->hdr) - sizeof(msg->cprbx); + + msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ? + static_pkd_fnr_MCL2 : static_pkd_fnr; + + ap_msg->length = size; + return 0; +} + +/** + * Copy results from a type 86 ICA reply message back to user space. + * + * @zdev: crypto device pointer + * @reply: reply AP message. + * @data: pointer to user output data + * @length: size of user output data + * + * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error. + */ +struct type86x_reply { + struct type86_hdr hdr; + struct type86_fmt2_ext fmt2; + struct CPRBX cprbx; + unsigned char pad[4]; /* 4 byte function code/rules block ? */ + unsigned short length; + char text[0]; +} __attribute__((packed)); + +static int convert_type86_ica(struct zcrypt_device *zdev, + struct ap_message *reply, + char __user *outputdata, + unsigned int outputdatalength) +{ + static unsigned char static_pad[] = { + 0x00,0x02, + 0x1B,0x7B,0x5D,0xB5,0x75,0x01,0x3D,0xFD, + 0x8D,0xD1,0xC7,0x03,0x2D,0x09,0x23,0x57, + 0x89,0x49,0xB9,0x3F,0xBB,0x99,0x41,0x5B, + 0x75,0x21,0x7B,0x9D,0x3B,0x6B,0x51,0x39, + 0xBB,0x0D,0x35,0xB9,0x89,0x0F,0x93,0xA5, + 0x0B,0x47,0xF1,0xD3,0xBB,0xCB,0xF1,0x9D, + 0x23,0x73,0x71,0xFF,0xF3,0xF5,0x45,0xFB, + 0x61,0x29,0x23,0xFD,0xF1,0x29,0x3F,0x7F, + 0x17,0xB7,0x1B,0xA9,0x19,0xBD,0x57,0xA9, + 0xD7,0x95,0xA3,0xCB,0xED,0x1D,0xDB,0x45, + 0x7D,0x11,0xD1,0x51,0x1B,0xED,0x71,0xE9, + 0xB1,0xD1,0xAB,0xAB,0x21,0x2B,0x1B,0x9F, + 0x3B,0x9F,0xF7,0xF7,0xBD,0x63,0xEB,0xAD, + 0xDF,0xB3,0x6F,0x5B,0xDB,0x8D,0xA9,0x5D, + 0xE3,0x7D,0x77,0x49,0x47,0xF5,0xA7,0xFD, + 0xAB,0x2F,0x27,0x35,0x77,0xD3,0x49,0xC9, + 0x09,0xEB,0xB1,0xF9,0xBF,0x4B,0xCB,0x2B, + 0xEB,0xEB,0x05,0xFF,0x7D,0xC7,0x91,0x8B, + 0x09,0x83,0xB9,0xB9,0x69,0x33,0x39,0x6B, + 0x79,0x75,0x19,0xBF,0xBB,0x07,0x1D,0xBD, + 0x29,0xBF,0x39,0x95,0x93,0x1D,0x35,0xC7, + 0xC9,0x4D,0xE5,0x97,0x0B,0x43,0x9B,0xF1, + 0x16,0x93,0x03,0x1F,0xA5,0xFB,0xDB,0xF3, + 0x27,0x4F,0x27,0x61,0x05,0x1F,0xB9,0x23, + 0x2F,0xC3,0x81,0xA9,0x23,0x71,0x55,0x55, + 0xEB,0xED,0x41,0xE5,0xF3,0x11,0xF1,0x43, + 0x69,0x03,0xBD,0x0B,0x37,0x0F,0x51,0x8F, + 0x0B,0xB5,0x89,0x5B,0x67,0xA9,0xD9,0x4F, + 0x01,0xF9,0x21,0x77,0x37,0x73,0x79,0xC5, + 0x7F,0x51,0xC1,0xCF,0x97,0xA1,0x75,0xAD, + 0x35,0x9D,0xD3,0xD3,0xA7,0x9D,0x5D,0x41, + 0x6F,0x65,0x1B,0xCF,0xA9,0x87,0x91,0x09 + }; + struct type86x_reply *msg = reply->message; + unsigned short service_rc, service_rs; + unsigned int reply_len, pad_len; + char *data; + + service_rc = msg->cprbx.ccp_rtcode; + if (unlikely(service_rc != 0)) { + service_rs = msg->cprbx.ccp_rscode; + if (service_rc == 8 && service_rs == 66) { + PDEBUG("Bad block format on PCIXCC/CEX2C\n"); + return -EINVAL; + } + if (service_rc == 8 && service_rs == 65) { + PDEBUG("Probably an even modulus on PCIXCC/CEX2C\n"); + return -EINVAL; + } + if (service_rc == 8 && service_rs == 770) { + PDEBUG("Invalid key length on PCIXCC/CEX2C\n"); + zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD; + return -EAGAIN; + } + if (service_rc == 8 && service_rs == 783) { + PDEBUG("Extended bitlengths not enabled on PCIXCC/CEX2C\n"); + zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD; + return -EAGAIN; + } + PRINTK("Unknown service rc/rs (PCIXCC/CEX2C): %d/%d\n", + service_rc, service_rs); + zdev->online = 0; + return -EAGAIN; /* repeat the request on a different device. */ + } + data = msg->text; + reply_len = msg->length - 2; + if (reply_len > outputdatalength) + return -EINVAL; + /** + * For all encipher requests, the length of the ciphertext (reply_len) + * will always equal the modulus length. For MEX decipher requests + * the output needs to get padded. Minimum pad size is 10. + * + * Currently, the cases where padding will be added is for: + * - PCIXCC_MCL2 using a CRT form token (since PKD didn't support + * ZERO-PAD and CRT is only supported for PKD requests) + * - PCICC, always + */ + pad_len = outputdatalength - reply_len; + if (pad_len > 0) { + if (pad_len < 10) + return -EINVAL; + /* 'restore' padding left in the PCICC/PCIXCC card. */ + if (copy_to_user(outputdata, static_pad, pad_len - 1)) + return -EFAULT; + if (put_user(0, outputdata + pad_len - 1)) + return -EFAULT; + } + /* Copy the crypto response to user space. */ + if (copy_to_user(outputdata + pad_len, data, reply_len)) + return -EFAULT; + return 0; +} + +static int convert_response_ica(struct zcrypt_device *zdev, + struct ap_message *reply, + char __user *outputdata, + unsigned int outputdatalength) +{ + struct type86x_reply *msg = reply->message; + + /* Response type byte is the second byte in the response. */ + switch (((unsigned char *) reply->message)[1]) { + case TYPE82_RSP_CODE: + case TYPE88_RSP_CODE: + return convert_error(zdev, reply); + case TYPE86_RSP_CODE: + if (msg->hdr.reply_code) + return convert_error(zdev, reply); + if (msg->cprbx.cprb_ver_id == 0x02) + return convert_type86_ica(zdev, reply, + outputdata, outputdatalength); + /* no break, incorrect cprb version is an unknown response */ + default: /* Unknown response type, this should NEVER EVER happen */ + PRINTK("Unrecognized Message Header: %08x%08x\n", + *(unsigned int *) reply->message, + *(unsigned int *) (reply->message+4)); + zdev->online = 0; + return -EAGAIN; /* repeat the request on a different device. */ + } +} + +/** + * This function is called from the AP bus code after a crypto request + * "msg" has finished with the reply message "reply". + * It is called from tasklet context. + * @ap_dev: pointer to the AP device + * @msg: pointer to the AP message + * @reply: pointer to the AP reply message + */ +static void zcrypt_pcixcc_receive(struct ap_device *ap_dev, + struct ap_message *msg, + struct ap_message *reply) +{ + static struct error_hdr error_reply = { + .type = TYPE82_RSP_CODE, + .reply_code = REP82_ERROR_MACHINE_FAILURE, + }; + struct type86x_reply *t86r = reply->message; + int length; + + /* Copy the reply message to the request message buffer. */ + if (IS_ERR(reply)) + memcpy(msg->message, &error_reply, sizeof(error_reply)); + else if (t86r->hdr.type == TYPE86_RSP_CODE && + t86r->cprbx.cprb_ver_id == 0x02) { + length = sizeof(struct type86x_reply) + t86r->length - 2; + length = min(PCIXCC_MAX_ICA_RESPONSE_SIZE, length); + memcpy(msg->message, reply->message, length); + } else + memcpy(msg->message, reply->message, sizeof error_reply); + complete((struct completion *) msg->private); +} + +static atomic_t zcrypt_step = ATOMIC_INIT(0); + +/** + * The request distributor calls this function if it picked the PCIXCC/CEX2C + * device to handle a modexpo request. + * @zdev: pointer to zcrypt_device structure that identifies the + * PCIXCC/CEX2C device to the request distributor + * @mex: pointer to the modexpo request buffer + */ +static long zcrypt_pcixcc_modexpo(struct zcrypt_device *zdev, + struct ica_rsa_modexpo *mex) +{ + struct ap_message ap_msg; + struct completion work; + int rc; + + ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); + if (!ap_msg.message) + return -ENOMEM; + ap_msg.psmid = (((unsigned long long) current->pid) << 32) + + atomic_inc_return(&zcrypt_step); + ap_msg.private = &work; + rc = ICAMEX_msg_to_type6MEX_msgX(zdev, &ap_msg, mex); + if (rc) + goto out_free; + init_completion(&work); + ap_queue_message(zdev->ap_dev, &ap_msg); + rc = wait_for_completion_interruptible_timeout( + &work, PCIXCC_CLEANUP_TIME); + if (rc > 0) + rc = convert_response_ica(zdev, &ap_msg, mex->outputdata, + mex->outputdatalength); + else { + /* Signal pending or message timed out. */ + ap_cancel_message(zdev->ap_dev, &ap_msg); + if (rc == 0) + /* Message timed out. */ + rc = -ETIME; + } +out_free: + free_page((unsigned long) ap_msg.message); + return rc; +} + +/** + * The request distributor calls this function if it picked the PCIXCC/CEX2C + * device to handle a modexpo_crt request. + * @zdev: pointer to zcrypt_device structure that identifies the + * PCIXCC/CEX2C device to the request distributor + * @crt: pointer to the modexpoc_crt request buffer + */ +static long zcrypt_pcixcc_modexpo_crt(struct zcrypt_device *zdev, + struct ica_rsa_modexpo_crt *crt) +{ + struct ap_message ap_msg; + struct completion work; + int rc; + + ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); + if (!ap_msg.message) + return -ENOMEM; + ap_msg.psmid = (((unsigned long long) current->pid) << 32) + + atomic_inc_return(&zcrypt_step); + ap_msg.private = &work; + rc = ICACRT_msg_to_type6CRT_msgX(zdev, &ap_msg, crt); + if (rc) + goto out_free; + init_completion(&work); + ap_queue_message(zdev->ap_dev, &ap_msg); + rc = wait_for_completion_interruptible_timeout( + &work, PCIXCC_CLEANUP_TIME); + if (rc > 0) + rc = convert_response_ica(zdev, &ap_msg, crt->outputdata, + crt->outputdatalength); + else { + /* Signal pending or message timed out. */ + ap_cancel_message(zdev->ap_dev, &ap_msg); + if (rc == 0) + /* Message timed out. */ + rc = -ETIME; + } +out_free: + free_page((unsigned long) ap_msg.message); + return rc; +} + +/** + * The crypto operations for a PCIXCC/CEX2C card. + */ +static struct zcrypt_ops zcrypt_pcixcc_ops = { + .rsa_modexpo = zcrypt_pcixcc_modexpo, + .rsa_modexpo_crt = zcrypt_pcixcc_modexpo_crt, +}; + +/** + * Micro-code detection function. Its sends a message to a pcixcc card + * to find out the microcode level. + * @ap_dev: pointer to the AP device. + */ +static int zcrypt_pcixcc_mcl(struct ap_device *ap_dev) +{ + static unsigned char msg[] = { + 0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x43,0x41,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x00, + 0x00,0x00,0x01,0xC4,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x07,0x24,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0xDC,0x02,0x00,0x00,0x00,0x54,0x32, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE8, + 0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x0A, + 0x4D,0x52,0x50,0x20,0x20,0x20,0x20,0x20, + 0x00,0x42,0x00,0x01,0x02,0x03,0x04,0x05, + 0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D, + 0x0E,0x0F,0x00,0x11,0x22,0x33,0x44,0x55, + 0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD, + 0xEE,0xFF,0xFF,0xEE,0xDD,0xCC,0xBB,0xAA, + 0x99,0x88,0x77,0x66,0x55,0x44,0x33,0x22, + 0x11,0x00,0x01,0x23,0x45,0x67,0x89,0xAB, + 0xCD,0xEF,0xFE,0xDC,0xBA,0x98,0x76,0x54, + 0x32,0x10,0x00,0x9A,0x00,0x98,0x00,0x00, + 0x1E,0x00,0x00,0x94,0x00,0x00,0x00,0x00, + 0x04,0x00,0x00,0x8C,0x00,0x00,0x00,0x40, + 0x02,0x00,0x00,0x40,0xBA,0xE8,0x23,0x3C, + 0x75,0xF3,0x91,0x61,0xD6,0x73,0x39,0xCF, + 0x7B,0x6D,0x8E,0x61,0x97,0x63,0x9E,0xD9, + 0x60,0x55,0xD6,0xC7,0xEF,0xF8,0x1E,0x63, + 0x95,0x17,0xCC,0x28,0x45,0x60,0x11,0xC5, + 0xC4,0x4E,0x66,0xC6,0xE6,0xC3,0xDE,0x8A, + 0x19,0x30,0xCF,0x0E,0xD7,0xAA,0xDB,0x01, + 0xD8,0x00,0xBB,0x8F,0x39,0x9F,0x64,0x28, + 0xF5,0x7A,0x77,0x49,0xCC,0x6B,0xA3,0x91, + 0x97,0x70,0xE7,0x60,0x1E,0x39,0xE1,0xE5, + 0x33,0xE1,0x15,0x63,0x69,0x08,0x80,0x4C, + 0x67,0xC4,0x41,0x8F,0x48,0xDF,0x26,0x98, + 0xF1,0xD5,0x8D,0x88,0xD9,0x6A,0xA4,0x96, + 0xC5,0x84,0xD9,0x30,0x49,0x67,0x7D,0x19, + 0xB1,0xB3,0x45,0x4D,0xB2,0x53,0x9A,0x47, + 0x3C,0x7C,0x55,0xBF,0xCC,0x85,0x00,0x36, + 0xF1,0x3D,0x93,0x53 + }; + unsigned long long psmid; + struct CPRBX *cprbx; + char *reply; + int rc, i; + + reply = (void *) get_zeroed_page(GFP_KERNEL); + if (!reply) + return -ENOMEM; + + rc = ap_send(ap_dev->qid, 0x0102030405060708ULL, msg, sizeof(msg)); + if (rc) + goto out_free; + + /* Wait for the test message to complete. */ + for (i = 0; i < 6; i++) { + mdelay(300); + rc = ap_recv(ap_dev->qid, &psmid, reply, 4096); + if (rc == 0 && psmid == 0x0102030405060708ULL) + break; + } + + if (i >= 6) { + /* Got no answer. */ + rc = -ENODEV; + goto out_free; + } + + cprbx = (struct CPRBX *) (reply + 48); + if (cprbx->ccp_rtcode == 8 && cprbx->ccp_rscode == 33) + rc = ZCRYPT_PCIXCC_MCL2; + else + rc = ZCRYPT_PCIXCC_MCL3; +out_free: + free_page((unsigned long) reply); + return rc; +} + +/** + * Probe function for PCIXCC/CEX2C cards. It always accepts the AP device + * since the bus_match already checked the hardware type. The PCIXCC + * cards come in two flavours: micro code level 2 and micro code level 3. + * This is checked by sending a test message to the device. + * @ap_dev: pointer to the AP device. + */ +static int zcrypt_pcixcc_probe(struct ap_device *ap_dev) +{ + struct zcrypt_device *zdev; + int rc; + + zdev = zcrypt_device_alloc(PCIXCC_MAX_RESPONSE_SIZE); + if (!zdev) + return -ENOMEM; + zdev->ap_dev = ap_dev; + zdev->ops = &zcrypt_pcixcc_ops; + zdev->online = 1; + if (ap_dev->device_type == AP_DEVICE_TYPE_PCIXCC) { + rc = zcrypt_pcixcc_mcl(ap_dev); + if (rc < 0) { + zcrypt_device_free(zdev); + return rc; + } + zdev->user_space_type = rc; + if (rc == ZCRYPT_PCIXCC_MCL2) { + zdev->type_string = "PCIXCC_MCL2"; + zdev->speed_rating = PCIXCC_MCL2_SPEED_RATING; + zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD; + zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE; + } else { + zdev->type_string = "PCIXCC_MCL3"; + zdev->speed_rating = PCIXCC_MCL3_SPEED_RATING; + zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE; + zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE; + } + } else { + zdev->user_space_type = ZCRYPT_CEX2C; + zdev->type_string = "CEX2C"; + zdev->speed_rating = CEX2C_SPEED_RATING; + zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE; + zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE; + } + ap_dev->reply = &zdev->reply; + ap_dev->private = zdev; + rc = zcrypt_device_register(zdev); + if (rc) + goto out_free; + return 0; + + out_free: + ap_dev->private = NULL; + zcrypt_device_free(zdev); + return rc; +} + +/** + * This is called to remove the extended PCIXCC/CEX2C driver information + * if an AP device is removed. + */ +static void zcrypt_pcixcc_remove(struct ap_device *ap_dev) +{ + struct zcrypt_device *zdev = ap_dev->private; + + zcrypt_device_unregister(zdev); +} + +int __init zcrypt_pcixcc_init(void) +{ + return ap_driver_register(&zcrypt_pcixcc_driver, THIS_MODULE, "pcixcc"); +} + +void zcrypt_pcixcc_exit(void) +{ + ap_driver_unregister(&zcrypt_pcixcc_driver); +} + +#ifndef CONFIG_ZCRYPT_MONOLITHIC +module_init(zcrypt_pcixcc_init); +module_exit(zcrypt_pcixcc_exit); +#endif diff --git a/drivers/s390/crypto/zcrypt_pcixcc.h b/drivers/s390/crypto/zcrypt_pcixcc.h new file mode 100644 index 00000000000..d4c44c4d7ad --- /dev/null +++ b/drivers/s390/crypto/zcrypt_pcixcc.h @@ -0,0 +1,79 @@ +/* + * linux/drivers/s390/crypto/zcrypt_pcixcc.h + * + * zcrypt 2.0.0 + * + * Copyright (C) 2001, 2006 IBM Corporation + * Author(s): Robert Burroughs + * Eric Rossman (edrossma@us.ibm.com) + * + * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) + * Major cleanup & driver split: Martin Schwidefsky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ZCRYPT_PCIXCC_H_ +#define _ZCRYPT_PCIXCC_H_ + +/** + * CPRBX + * Note that all shorts and ints are big-endian. + * All pointer fields are 16 bytes long, and mean nothing. + * + * A request CPRB is followed by a request_parameter_block. + * + * The request (or reply) parameter block is organized thus: + * function code + * VUD block + * key block + */ +struct CPRBX { + unsigned short cprb_len; /* CPRB length 220 */ + unsigned char cprb_ver_id; /* CPRB version id. 0x02 */ + unsigned char pad_000[3]; /* Alignment pad bytes */ + unsigned char func_id[2]; /* function id 0x5432 */ + unsigned char cprb_flags[4]; /* Flags */ + unsigned int req_parml; /* request parameter buffer len */ + unsigned int req_datal; /* request data buffer */ + unsigned int rpl_msgbl; /* reply message block length */ + unsigned int rpld_parml; /* replied parameter block len */ + unsigned int rpl_datal; /* reply data block len */ + unsigned int rpld_datal; /* replied data block len */ + unsigned int req_extbl; /* request extension block len */ + unsigned char pad_001[4]; /* reserved */ + unsigned int rpld_extbl; /* replied extension block len */ + unsigned char req_parmb[16]; /* request parm block 'address' */ + unsigned char req_datab[16]; /* request data block 'address' */ + unsigned char rpl_parmb[16]; /* reply parm block 'address' */ + unsigned char rpl_datab[16]; /* reply data block 'address' */ + unsigned char req_extb[16]; /* request extension block 'addr'*/ + unsigned char rpl_extb[16]; /* reply extension block 'addres'*/ + unsigned short ccp_rtcode; /* server return code */ + unsigned short ccp_rscode; /* server reason code */ + unsigned int mac_data_len; /* Mac Data Length */ + unsigned char logon_id[8]; /* Logon Identifier */ + unsigned char mac_value[8]; /* Mac Value */ + unsigned char mac_content_flgs;/* Mac content flag byte */ + unsigned char pad_002; /* Alignment */ + unsigned short domain; /* Domain */ + unsigned char pad_003[12]; /* Domain masks */ + unsigned char pad_004[36]; /* reserved */ +} __attribute__((packed)); + +int zcrypt_pcixcc_init(void); +void zcrypt_pcixcc_exit(void); + +#endif /* _ZCRYPT_PCIXCC_H_ */ -- cgit v1.2.3