From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/aacraid/commsup.c | 939 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 939 insertions(+) create mode 100644 drivers/scsi/aacraid/commsup.c (limited to 'drivers/scsi/aacraid/commsup.c') diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c new file mode 100644 index 00000000000..3f36dbaa2bb --- /dev/null +++ b/drivers/scsi/aacraid/commsup.c @@ -0,0 +1,939 @@ +/* + * Adaptec AAC series RAID controller driver + * (c) Copyright 2001 Red Hat Inc. + * + * based on the old aacraid driver that is.. + * Adaptec aacraid device driver for Linux. + * + * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Module Name: + * commsup.c + * + * Abstract: Contain all routines that are required for FSA host/adapter + * commuication. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "aacraid.h" + +/** + * fib_map_alloc - allocate the fib objects + * @dev: Adapter to allocate for + * + * Allocate and map the shared PCI space for the FIB blocks used to + * talk to the Adaptec firmware. + */ + +static int fib_map_alloc(struct aac_dev *dev) +{ + if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, &dev->hw_fib_pa))==NULL) + return -ENOMEM; + return 0; +} + +/** + * fib_map_free - free the fib objects + * @dev: Adapter to free + * + * Free the PCI mappings and the memory allocated for FIB blocks + * on this adapter. + */ + +void fib_map_free(struct aac_dev *dev) +{ + pci_free_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, dev->hw_fib_va, dev->hw_fib_pa); +} + +/** + * fib_setup - setup the fibs + * @dev: Adapter to set up + * + * Allocate the PCI space for the fibs, map it and then intialise the + * fib area, the unmapped fib data and also the free list + */ + +int fib_setup(struct aac_dev * dev) +{ + struct fib *fibptr; + struct hw_fib *hw_fib_va; + dma_addr_t hw_fib_pa; + int i; + + if(fib_map_alloc(dev)<0) + return -ENOMEM; + + hw_fib_va = dev->hw_fib_va; + hw_fib_pa = dev->hw_fib_pa; + memset(hw_fib_va, 0, sizeof(struct hw_fib) * AAC_NUM_FIB); + /* + * Initialise the fibs + */ + for (i = 0, fibptr = &dev->fibs[i]; i < AAC_NUM_FIB; i++, fibptr++) + { + fibptr->dev = dev; + fibptr->hw_fib = hw_fib_va; + fibptr->data = (void *) fibptr->hw_fib->data; + fibptr->next = fibptr+1; /* Forward chain the fibs */ + init_MUTEX_LOCKED(&fibptr->event_wait); + spin_lock_init(&fibptr->event_lock); + hw_fib_va->header.XferState = 0xffffffff; + hw_fib_va->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib)); + fibptr->hw_fib_pa = hw_fib_pa; + hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + sizeof(struct hw_fib)); + hw_fib_pa = hw_fib_pa + sizeof(struct hw_fib); + } + /* + * Add the fib chain to the free list + */ + dev->fibs[AAC_NUM_FIB-1].next = NULL; + /* + * Enable this to debug out of queue space + */ + dev->free_fib = &dev->fibs[0]; + return 0; +} + +/** + * fib_alloc - allocate a fib + * @dev: Adapter to allocate the fib for + * + * Allocate a fib from the adapter fib pool. If the pool is empty we + * wait for fibs to become free. + */ + +struct fib * fib_alloc(struct aac_dev *dev) +{ + struct fib * fibptr; + unsigned long flags; + spin_lock_irqsave(&dev->fib_lock, flags); + fibptr = dev->free_fib; + /* Cannot sleep here or you get hangs. Instead we did the + maths at compile time. */ + if(!fibptr) + BUG(); + dev->free_fib = fibptr->next; + spin_unlock_irqrestore(&dev->fib_lock, flags); + /* + * Set the proper node type code and node byte size + */ + fibptr->type = FSAFS_NTC_FIB_CONTEXT; + fibptr->size = sizeof(struct fib); + /* + * Null out fields that depend on being zero at the start of + * each I/O + */ + fibptr->hw_fib->header.XferState = 0; + fibptr->callback = NULL; + fibptr->callback_data = NULL; + + return fibptr; +} + +/** + * fib_free - free a fib + * @fibptr: fib to free up + * + * Frees up a fib and places it on the appropriate queue + * (either free or timed out) + */ + +void fib_free(struct fib * fibptr) +{ + unsigned long flags; + + spin_lock_irqsave(&fibptr->dev->fib_lock, flags); + if (fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT) { + aac_config.fib_timeouts++; + fibptr->next = fibptr->dev->timeout_fib; + fibptr->dev->timeout_fib = fibptr; + } else { + if (fibptr->hw_fib->header.XferState != 0) { + printk(KERN_WARNING "fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n", + (void*)fibptr, + le32_to_cpu(fibptr->hw_fib->header.XferState)); + } + fibptr->next = fibptr->dev->free_fib; + fibptr->dev->free_fib = fibptr; + } + spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags); +} + +/** + * fib_init - initialise a fib + * @fibptr: The fib to initialize + * + * Set up the generic fib fields ready for use + */ + +void fib_init(struct fib *fibptr) +{ + struct hw_fib *hw_fib = fibptr->hw_fib; + + hw_fib->header.StructType = FIB_MAGIC; + hw_fib->header.Size = cpu_to_le16(sizeof(struct hw_fib)); + hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable); + hw_fib->header.SenderFibAddress = cpu_to_le32(fibptr->hw_fib_pa); + hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa); + hw_fib->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib)); +} + +/** + * fib_deallocate - deallocate a fib + * @fibptr: fib to deallocate + * + * Will deallocate and return to the free pool the FIB pointed to by the + * caller. + */ + +void fib_dealloc(struct fib * fibptr) +{ + struct hw_fib *hw_fib = fibptr->hw_fib; + if(hw_fib->header.StructType != FIB_MAGIC) + BUG(); + hw_fib->header.XferState = 0; +} + +/* + * Commuication primitives define and support the queuing method we use to + * support host to adapter commuication. All queue accesses happen through + * these routines and are the only routines which have a knowledge of the + * how these queues are implemented. + */ + +/** + * aac_get_entry - get a queue entry + * @dev: Adapter + * @qid: Queue Number + * @entry: Entry return + * @index: Index return + * @nonotify: notification control + * + * With a priority the routine returns a queue entry if the queue has free entries. If the queue + * is full(no free entries) than no entry is returned and the function returns 0 otherwise 1 is + * returned. + */ + +static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entry, u32 * index, unsigned long *nonotify) +{ + struct aac_queue * q; + + /* + * All of the queues wrap when they reach the end, so we check + * to see if they have reached the end and if they have we just + * set the index back to zero. This is a wrap. You could or off + * the high bits in all updates but this is a bit faster I think. + */ + + q = &dev->queues->queue[qid]; + + *index = le32_to_cpu(*(q->headers.producer)); + if ((*index - 2) == le32_to_cpu(*(q->headers.consumer))) + *nonotify = 1; + + if (qid == AdapHighCmdQueue) { + if (*index >= ADAP_HIGH_CMD_ENTRIES) + *index = 0; + } else if (qid == AdapNormCmdQueue) { + if (*index >= ADAP_NORM_CMD_ENTRIES) + *index = 0; /* Wrap to front of the Producer Queue. */ + } + else if (qid == AdapHighRespQueue) + { + if (*index >= ADAP_HIGH_RESP_ENTRIES) + *index = 0; + } + else if (qid == AdapNormRespQueue) + { + if (*index >= ADAP_NORM_RESP_ENTRIES) + *index = 0; /* Wrap to front of the Producer Queue. */ + } + else { + printk("aacraid: invalid qid\n"); + BUG(); + } + + if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */ + printk(KERN_WARNING "Queue %d full, %d outstanding.\n", + qid, q->numpending); + return 0; + } else { + *entry = q->base + *index; + return 1; + } +} + +/** + * aac_queue_get - get the next free QE + * @dev: Adapter + * @index: Returned index + * @priority: Priority of fib + * @fib: Fib to associate with the queue entry + * @wait: Wait if queue full + * @fibptr: Driver fib object to go with fib + * @nonotify: Don't notify the adapter + * + * Gets the next free QE off the requested priorty adapter command + * queue and associates the Fib with the QE. The QE represented by + * index is ready to insert on the queue when this routine returns + * success. + */ + +static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify) +{ + struct aac_entry * entry = NULL; + int map = 0; + struct aac_queue * q = &dev->queues->queue[qid]; + + spin_lock_irqsave(q->lock, q->SavedIrql); + + if (qid == AdapHighCmdQueue || qid == AdapNormCmdQueue) + { + /* if no entries wait for some if caller wants to */ + while (!aac_get_entry(dev, qid, &entry, index, nonotify)) + { + printk(KERN_ERR "GetEntries failed\n"); + } + /* + * Setup queue entry with a command, status and fib mapped + */ + entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size)); + map = 1; + } + else if (qid == AdapHighRespQueue || qid == AdapNormRespQueue) + { + while(!aac_get_entry(dev, qid, &entry, index, nonotify)) + { + /* if no entries wait for some if caller wants to */ + } + /* + * Setup queue entry with command, status and fib mapped + */ + entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size)); + entry->addr = hw_fib->header.SenderFibAddress; + /* Restore adapters pointer to the FIB */ + hw_fib->header.ReceiverFibAddress = hw_fib->header.SenderFibAddress; /* Let the adapter now where to find its data */ + map = 0; + } + /* + * If MapFib is true than we need to map the Fib and put pointers + * in the queue entry. + */ + if (map) + entry->addr = cpu_to_le32(fibptr->hw_fib_pa); + return 0; +} + + +/** + * aac_insert_entry - insert a queue entry + * @dev: Adapter + * @index: Index of entry to insert + * @qid: Queue number + * @nonotify: Suppress adapter notification + * + * Gets the next free QE off the requested priorty adapter command + * queue and associates the Fib with the QE. The QE represented by + * index is ready to insert on the queue when this routine returns + * success. + */ + +static int aac_insert_entry(struct aac_dev * dev, u32 index, u32 qid, unsigned long nonotify) +{ + struct aac_queue * q = &dev->queues->queue[qid]; + + if(q == NULL) + BUG(); + *(q->headers.producer) = cpu_to_le32(index + 1); + spin_unlock_irqrestore(q->lock, q->SavedIrql); + + if (qid == AdapHighCmdQueue || + qid == AdapNormCmdQueue || + qid == AdapHighRespQueue || + qid == AdapNormRespQueue) + { + if (!nonotify) + aac_adapter_notify(dev, qid); + } + else + printk("Suprise insert!\n"); + return 0; +} + +/* + * Define the highest level of host to adapter communication routines. + * These routines will support host to adapter FS commuication. These + * routines have no knowledge of the commuication method used. This level + * sends and receives FIBs. This level has no knowledge of how these FIBs + * get passed back and forth. + */ + +/** + * fib_send - send a fib to the adapter + * @command: Command to send + * @fibptr: The fib + * @size: Size of fib data area + * @priority: Priority of Fib + * @wait: Async/sync select + * @reply: True if a reply is wanted + * @callback: Called with reply + * @callback_data: Passed to callback + * + * Sends the requested FIB to the adapter and optionally will wait for a + * response FIB. If the caller does not wish to wait for a response than + * an event to wait on must be supplied. This event will be set when a + * response FIB is received from the adapter. + */ + +int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority, int wait, int reply, fib_callback callback, void * callback_data) +{ + u32 index; + u32 qid; + struct aac_dev * dev = fibptr->dev; + unsigned long nointr = 0; + struct hw_fib * hw_fib = fibptr->hw_fib; + struct aac_queue * q; + unsigned long flags = 0; + if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned))) + return -EBUSY; + /* + * There are 5 cases with the wait and reponse requested flags. + * The only invalid cases are if the caller requests to wait and + * does not request a response and if the caller does not want a + * response and the Fib is not allocated from pool. If a response + * is not requesed the Fib will just be deallocaed by the DPC + * routine when the response comes back from the adapter. No + * further processing will be done besides deleting the Fib. We + * will have a debug mode where the adapter can notify the host + * it had a problem and the host can log that fact. + */ + if (wait && !reply) { + return -EINVAL; + } else if (!wait && reply) { + hw_fib->header.XferState |= cpu_to_le32(Async | ResponseExpected); + FIB_COUNTER_INCREMENT(aac_config.AsyncSent); + } else if (!wait && !reply) { + hw_fib->header.XferState |= cpu_to_le32(NoResponseExpected); + FIB_COUNTER_INCREMENT(aac_config.NoResponseSent); + } else if (wait && reply) { + hw_fib->header.XferState |= cpu_to_le32(ResponseExpected); + FIB_COUNTER_INCREMENT(aac_config.NormalSent); + } + /* + * Map the fib into 32bits by using the fib number + */ + + hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr-dev->fibs)) << 1); + hw_fib->header.SenderData = (u32)(fibptr - dev->fibs); + /* + * Set FIB state to indicate where it came from and if we want a + * response from the adapter. Also load the command from the + * caller. + * + * Map the hw fib pointer as a 32bit value + */ + hw_fib->header.Command = cpu_to_le16(command); + hw_fib->header.XferState |= cpu_to_le32(SentFromHost); + fibptr->hw_fib->header.Flags = 0; /* 0 the flags field - internal only*/ + /* + * Set the size of the Fib we want to send to the adapter + */ + hw_fib->header.Size = cpu_to_le16(sizeof(struct aac_fibhdr) + size); + if (le16_to_cpu(hw_fib->header.Size) > le16_to_cpu(hw_fib->header.SenderSize)) { + return -EMSGSIZE; + } + /* + * Get a queue entry connect the FIB to it and send an notify + * the adapter a command is ready. + */ + if (priority == FsaHigh) { + hw_fib->header.XferState |= cpu_to_le32(HighPriority); + qid = AdapHighCmdQueue; + } else { + hw_fib->header.XferState |= cpu_to_le32(NormalPriority); + qid = AdapNormCmdQueue; + } + q = &dev->queues->queue[qid]; + + if(wait) + spin_lock_irqsave(&fibptr->event_lock, flags); + if(aac_queue_get( dev, &index, qid, hw_fib, 1, fibptr, &nointr)<0) + return -EWOULDBLOCK; + dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index)); + dprintk((KERN_DEBUG "Fib contents:.\n")); + dprintk((KERN_DEBUG " Command = %d.\n", hw_fib->header.Command)); + dprintk((KERN_DEBUG " XferState = %x.\n", hw_fib->header.XferState)); + dprintk((KERN_DEBUG " hw_fib va being sent=%p\n",fibptr->hw_fib)); + dprintk((KERN_DEBUG " hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa)); + dprintk((KERN_DEBUG " fib being sent=%p\n",fibptr)); + /* + * Fill in the Callback and CallbackContext if we are not + * going to wait. + */ + if (!wait) { + fibptr->callback = callback; + fibptr->callback_data = callback_data; + } + FIB_COUNTER_INCREMENT(aac_config.FibsSent); + list_add_tail(&fibptr->queue, &q->pendingq); + q->numpending++; + + fibptr->done = 0; + fibptr->flags = 0; + + if(aac_insert_entry(dev, index, qid, (nointr & aac_config.irq_mod)) < 0) + return -EWOULDBLOCK; + /* + * If the caller wanted us to wait for response wait now. + */ + + if (wait) { + spin_unlock_irqrestore(&fibptr->event_lock, flags); + down(&fibptr->event_wait); + if(fibptr->done == 0) + BUG(); + + if((fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)){ + return -ETIMEDOUT; + } else { + return 0; + } + } + /* + * If the user does not want a response than return success otherwise + * return pending + */ + if (reply) + return -EINPROGRESS; + else + return 0; +} + +/** + * aac_consumer_get - get the top of the queue + * @dev: Adapter + * @q: Queue + * @entry: Return entry + * + * Will return a pointer to the entry on the top of the queue requested that + * we are a consumer of, and return the address of the queue entry. It does + * not change the state of the queue. + */ + +int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry) +{ + u32 index; + int status; + if (le32_to_cpu(*q->headers.producer) == le32_to_cpu(*q->headers.consumer)) { + status = 0; + } else { + /* + * The consumer index must be wrapped if we have reached + * the end of the queue, else we just use the entry + * pointed to by the header index + */ + if (le32_to_cpu(*q->headers.consumer) >= q->entries) + index = 0; + else + index = le32_to_cpu(*q->headers.consumer); + *entry = q->base + index; + status = 1; + } + return(status); +} + +/** + * aac_consumer_free - free consumer entry + * @dev: Adapter + * @q: Queue + * @qid: Queue ident + * + * Frees up the current top of the queue we are a consumer of. If the + * queue was full notify the producer that the queue is no longer full. + */ + +void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid) +{ + int wasfull = 0; + u32 notify; + + if ((le32_to_cpu(*q->headers.producer)+1) == le32_to_cpu(*q->headers.consumer)) + wasfull = 1; + + if (le32_to_cpu(*q->headers.consumer) >= q->entries) + *q->headers.consumer = cpu_to_le32(1); + else + *q->headers.consumer = cpu_to_le32(le32_to_cpu(*q->headers.consumer)+1); + + if (wasfull) { + switch (qid) { + + case HostNormCmdQueue: + notify = HostNormCmdNotFull; + break; + case HostHighCmdQueue: + notify = HostHighCmdNotFull; + break; + case HostNormRespQueue: + notify = HostNormRespNotFull; + break; + case HostHighRespQueue: + notify = HostHighRespNotFull; + break; + default: + BUG(); + return; + } + aac_adapter_notify(dev, notify); + } +} + +/** + * fib_adapter_complete - complete adapter issued fib + * @fibptr: fib to complete + * @size: size of fib + * + * Will do all necessary work to complete a FIB that was sent from + * the adapter. + */ + +int fib_adapter_complete(struct fib * fibptr, unsigned short size) +{ + struct hw_fib * hw_fib = fibptr->hw_fib; + struct aac_dev * dev = fibptr->dev; + unsigned long nointr = 0; + if (hw_fib->header.XferState == 0) + return 0; + /* + * If we plan to do anything check the structure type first. + */ + if ( hw_fib->header.StructType != FIB_MAGIC ) { + return -EINVAL; + } + /* + * This block handles the case where the adapter had sent us a + * command and we have finished processing the command. We + * call completeFib when we are done processing the command + * and want to send a response back to the adapter. This will + * send the completed cdb to the adapter. + */ + if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) { + hw_fib->header.XferState |= cpu_to_le32(HostProcessed); + if (hw_fib->header.XferState & cpu_to_le32(HighPriority)) { + u32 index; + if (size) + { + size += sizeof(struct aac_fibhdr); + if (size > le16_to_cpu(hw_fib->header.SenderSize)) + return -EMSGSIZE; + hw_fib->header.Size = cpu_to_le16(size); + } + if(aac_queue_get(dev, &index, AdapHighRespQueue, hw_fib, 1, NULL, &nointr) < 0) { + return -EWOULDBLOCK; + } + if (aac_insert_entry(dev, index, AdapHighRespQueue, (nointr & (int)aac_config.irq_mod)) != 0) { + } + } + else if (hw_fib->header.XferState & NormalPriority) + { + u32 index; + + if (size) { + size += sizeof(struct aac_fibhdr); + if (size > le16_to_cpu(hw_fib->header.SenderSize)) + return -EMSGSIZE; + hw_fib->header.Size = cpu_to_le16(size); + } + if (aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr) < 0) + return -EWOULDBLOCK; + if (aac_insert_entry(dev, index, AdapNormRespQueue, (nointr & (int)aac_config.irq_mod)) != 0) + { + } + } + } + else + { + printk(KERN_WARNING "fib_adapter_complete: Unknown xferstate detected.\n"); + BUG(); + } + return 0; +} + +/** + * fib_complete - fib completion handler + * @fib: FIB to complete + * + * Will do all necessary work to complete a FIB. + */ + +int fib_complete(struct fib * fibptr) +{ + struct hw_fib * hw_fib = fibptr->hw_fib; + + /* + * Check for a fib which has already been completed + */ + + if (hw_fib->header.XferState == 0) + return 0; + /* + * If we plan to do anything check the structure type first. + */ + + if (hw_fib->header.StructType != FIB_MAGIC) + return -EINVAL; + /* + * This block completes a cdb which orginated on the host and we + * just need to deallocate the cdb or reinit it. At this point the + * command is complete that we had sent to the adapter and this + * cdb could be reused. + */ + if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) && + (hw_fib->header.XferState & cpu_to_le32(AdapterProcessed))) + { + fib_dealloc(fibptr); + } + else if(hw_fib->header.XferState & cpu_to_le32(SentFromHost)) + { + /* + * This handles the case when the host has aborted the I/O + * to the adapter because the adapter is not responding + */ + fib_dealloc(fibptr); + } else if(hw_fib->header.XferState & cpu_to_le32(HostOwned)) { + fib_dealloc(fibptr); + } else { + BUG(); + } + return 0; +} + +/** + * aac_printf - handle printf from firmware + * @dev: Adapter + * @val: Message info + * + * Print a message passed to us by the controller firmware on the + * Adaptec board + */ + +void aac_printf(struct aac_dev *dev, u32 val) +{ + int length = val & 0xffff; + int level = (val >> 16) & 0xffff; + char *cp = dev->printfbuf; + + /* + * The size of the printfbuf is set in port.c + * There is no variable or define for it + */ + if (length > 255) + length = 255; + if (cp[length] != 0) + cp[length] = 0; + if (level == LOG_AAC_HIGH_ERROR) + printk(KERN_WARNING "aacraid:%s", cp); + else + printk(KERN_INFO "aacraid:%s", cp); + memset(cp, 0, 256); +} + +/** + * aac_command_thread - command processing thread + * @dev: Adapter to monitor + * + * Waits on the commandready event in it's queue. When the event gets set + * it will pull FIBs off it's queue. It will continue to pull FIBs off + * until the queue is empty. When the queue is empty it will wait for + * more FIBs. + */ + +int aac_command_thread(struct aac_dev * dev) +{ + struct hw_fib *hw_fib, *hw_newfib; + struct fib *fib, *newfib; + struct aac_queue_block *queues = dev->queues; + struct aac_fib_context *fibctx; + unsigned long flags; + DECLARE_WAITQUEUE(wait, current); + + /* + * We can only have one thread per adapter for AIF's. + */ + if (dev->aif_thread) + return -EINVAL; + /* + * Set up the name that will appear in 'ps' + * stored in task_struct.comm[16]. + */ + daemonize("aacraid"); + allow_signal(SIGKILL); + /* + * Let the DPC know it has a place to send the AIF's to. + */ + dev->aif_thread = 1; + add_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait); + set_current_state(TASK_INTERRUPTIBLE); + while(1) + { + spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags); + while(!list_empty(&(queues->queue[HostNormCmdQueue].cmdq))) { + struct list_head *entry; + struct aac_aifcmd * aifcmd; + + set_current_state(TASK_RUNNING); + + entry = queues->queue[HostNormCmdQueue].cmdq.next; + list_del(entry); + + spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags); + fib = list_entry(entry, struct fib, fiblink); + /* + * We will process the FIB here or pass it to a + * worker thread that is TBD. We Really can't + * do anything at this point since we don't have + * anything defined for this thread to do. + */ + hw_fib = fib->hw_fib; + memset(fib, 0, sizeof(struct fib)); + fib->type = FSAFS_NTC_FIB_CONTEXT; + fib->size = sizeof( struct fib ); + fib->hw_fib = hw_fib; + fib->data = hw_fib->data; + fib->dev = dev; + /* + * We only handle AifRequest fibs from the adapter. + */ + aifcmd = (struct aac_aifcmd *) hw_fib->data; + if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) { + /* Handle Driver Notify Events */ + *(u32 *)hw_fib->data = cpu_to_le32(ST_OK); + fib_adapter_complete(fib, sizeof(u32)); + } else { + struct list_head *entry; + /* The u32 here is important and intended. We are using + 32bit wrapping time to fit the adapter field */ + + u32 time_now, time_last; + unsigned long flagv; + + time_now = jiffies/HZ; + + spin_lock_irqsave(&dev->fib_lock, flagv); + entry = dev->fib_list.next; + /* + * For each Context that is on the + * fibctxList, make a copy of the + * fib, and then set the event to wake up the + * thread that is waiting for it. + */ + while (entry != &dev->fib_list) { + /* + * Extract the fibctx + */ + fibctx = list_entry(entry, struct aac_fib_context, next); + /* + * Check if the queue is getting + * backlogged + */ + if (fibctx->count > 20) + { + /* + * It's *not* jiffies folks, + * but jiffies / HZ so do not + * panic ... + */ + time_last = fibctx->jiffies; + /* + * Has it been > 2 minutes + * since the last read off + * the queue? + */ + if ((time_now - time_last) > 120) { + entry = entry->next; + aac_close_fib_context(dev, fibctx); + continue; + } + } + /* + * Warning: no sleep allowed while + * holding spinlock + */ + hw_newfib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC); + newfib = kmalloc(sizeof(struct fib), GFP_ATOMIC); + if (newfib && hw_newfib) { + /* + * Make the copy of the FIB + */ + memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib)); + memcpy(newfib, fib, sizeof(struct fib)); + newfib->hw_fib = hw_newfib; + /* + * Put the FIB onto the + * fibctx's fibs + */ + list_add_tail(&newfib->fiblink, &fibctx->fib_list); + fibctx->count++; + /* + * Set the event to wake up the + * thread that will waiting. + */ + up(&fibctx->wait_sem); + } else { + printk(KERN_WARNING "aifd: didn't allocate NewFib.\n"); + if(newfib) + kfree(newfib); + if(hw_newfib) + kfree(hw_newfib); + } + entry = entry->next; + } + /* + * Set the status of this FIB + */ + *(u32 *)hw_fib->data = cpu_to_le32(ST_OK); + fib_adapter_complete(fib, sizeof(u32)); + spin_unlock_irqrestore(&dev->fib_lock, flagv); + } + spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags); + kfree(fib); + } + /* + * There are no more AIF's + */ + spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags); + schedule(); + + if(signal_pending(current)) + break; + set_current_state(TASK_INTERRUPTIBLE); + } + remove_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait); + dev->aif_thread = 0; + complete_and_exit(&dev->aif_completion, 0); +} -- cgit v1.2.3