From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/aic7xxx/aiclib.h | 1085 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1085 insertions(+) create mode 100644 drivers/scsi/aic7xxx/aiclib.h (limited to 'drivers/scsi/aic7xxx/aiclib.h') diff --git a/drivers/scsi/aic7xxx/aiclib.h b/drivers/scsi/aic7xxx/aiclib.h new file mode 100644 index 00000000000..bfe6f954d3c --- /dev/null +++ b/drivers/scsi/aic7xxx/aiclib.h @@ -0,0 +1,1085 @@ +/* + * Largely written by Julian Elischer (julian@tfs.com) + * for TRW Financial Systems. + * + * TRW Financial Systems, in accordance with their agreement with Carnegie + * Mellon University, makes this software available to CMU to distribute + * or use in any manner that they see fit as long as this message is kept with + * the software. For this reason TFS also grants any other persons or + * organisations permission to use or modify this software. + * + * TFS supplies this software to be publicly redistributed + * on the understanding that TFS is not responsible for the correct + * functioning of this software in any circumstances. + * + * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 + * + * $FreeBSD: src/sys/cam/scsi/scsi_all.h,v 1.21 2002/10/08 17:12:44 ken Exp $ + * + * Copyright (c) 2003 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * $Id$ + */ + +#ifndef _AICLIB_H +#define _AICLIB_H + +/* + * Linux Interrupt Support. + */ +#ifndef IRQ_RETVAL +typedef void irqreturn_t; +#define IRQ_RETVAL(x) +#endif + +/* + * SCSI command format + */ + +/* + * Define dome bits that are in ALL (or a lot of) scsi commands + */ +#define SCSI_CTL_LINK 0x01 +#define SCSI_CTL_FLAG 0x02 +#define SCSI_CTL_VENDOR 0xC0 +#define SCSI_CMD_LUN 0xA0 /* these two should not be needed */ +#define SCSI_CMD_LUN_SHIFT 5 /* LUN in the cmd is no longer SCSI */ + +#define SCSI_MAX_CDBLEN 16 /* + * 16 byte commands are in the + * SCSI-3 spec + */ +/* 6byte CDBs special case 0 length to be 256 */ +#define SCSI_CDB6_LEN(len) ((len) == 0 ? 256 : len) + +/* + * This type defines actions to be taken when a particular sense code is + * received. Right now, these flags are only defined to take up 16 bits, + * but can be expanded in the future if necessary. + */ +typedef enum { + SS_NOP = 0x000000, /* Do nothing */ + SS_RETRY = 0x010000, /* Retry the command */ + SS_FAIL = 0x020000, /* Bail out */ + SS_START = 0x030000, /* Send a Start Unit command to the device, + * then retry the original command. + */ + SS_TUR = 0x040000, /* Send a Test Unit Ready command to the + * device, then retry the original command. + */ + SS_REQSENSE = 0x050000, /* Send a RequestSense command to the + * device, then retry the original command. + */ + SS_INQ_REFRESH = 0x060000, + SS_MASK = 0xff0000 +} aic_sense_action; + +typedef enum { + SSQ_NONE = 0x0000, + SSQ_DECREMENT_COUNT = 0x0100, /* Decrement the retry count */ + SSQ_MANY = 0x0200, /* send lots of recovery commands */ + SSQ_RANGE = 0x0400, /* + * This table entry represents the + * end of a range of ASCQs that + * have identical error actions + * and text. + */ + SSQ_PRINT_SENSE = 0x0800, + SSQ_DELAY = 0x1000, /* Delay before retry. */ + SSQ_DELAY_RANDOM = 0x2000, /* Randomized delay before retry. */ + SSQ_FALLBACK = 0x4000, /* Do a speed fallback to recover */ + SSQ_MASK = 0xff00 +} aic_sense_action_qualifier; + +/* Mask for error status values */ +#define SS_ERRMASK 0xff + +/* The default, retyable, error action */ +#define SS_RDEF SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE|EIO + +/* The retyable, error action, with table specified error code */ +#define SS_RET SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE + +/* Fatal error action, with table specified error code */ +#define SS_FATAL SS_FAIL|SSQ_PRINT_SENSE + +struct scsi_generic +{ + uint8_t opcode; + uint8_t bytes[11]; +}; + +struct scsi_request_sense +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused[2]; + uint8_t length; + uint8_t control; +}; + +struct scsi_test_unit_ready +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused[3]; + uint8_t control; +}; + +struct scsi_send_diag +{ + uint8_t opcode; + uint8_t byte2; +#define SSD_UOL 0x01 +#define SSD_DOL 0x02 +#define SSD_SELFTEST 0x04 +#define SSD_PF 0x10 + uint8_t unused[1]; + uint8_t paramlen[2]; + uint8_t control; +}; + +struct scsi_sense +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused[2]; + uint8_t length; + uint8_t control; +}; + +struct scsi_inquiry +{ + uint8_t opcode; + uint8_t byte2; +#define SI_EVPD 0x01 + uint8_t page_code; + uint8_t reserved; + uint8_t length; + uint8_t control; +}; + +struct scsi_mode_sense_6 +{ + uint8_t opcode; + uint8_t byte2; +#define SMS_DBD 0x08 + uint8_t page; +#define SMS_PAGE_CODE 0x3F +#define SMS_VENDOR_SPECIFIC_PAGE 0x00 +#define SMS_DISCONNECT_RECONNECT_PAGE 0x02 +#define SMS_PERIPHERAL_DEVICE_PAGE 0x09 +#define SMS_CONTROL_MODE_PAGE 0x0A +#define SMS_ALL_PAGES_PAGE 0x3F +#define SMS_PAGE_CTRL_MASK 0xC0 +#define SMS_PAGE_CTRL_CURRENT 0x00 +#define SMS_PAGE_CTRL_CHANGEABLE 0x40 +#define SMS_PAGE_CTRL_DEFAULT 0x80 +#define SMS_PAGE_CTRL_SAVED 0xC0 + uint8_t unused; + uint8_t length; + uint8_t control; +}; + +struct scsi_mode_sense_10 +{ + uint8_t opcode; + uint8_t byte2; /* same bits as small version */ + uint8_t page; /* same bits as small version */ + uint8_t unused[4]; + uint8_t length[2]; + uint8_t control; +}; + +struct scsi_mode_select_6 +{ + uint8_t opcode; + uint8_t byte2; +#define SMS_SP 0x01 +#define SMS_PF 0x10 + uint8_t unused[2]; + uint8_t length; + uint8_t control; +}; + +struct scsi_mode_select_10 +{ + uint8_t opcode; + uint8_t byte2; /* same bits as small version */ + uint8_t unused[5]; + uint8_t length[2]; + uint8_t control; +}; + +/* + * When sending a mode select to a tape drive, the medium type must be 0. + */ +struct scsi_mode_hdr_6 +{ + uint8_t datalen; + uint8_t medium_type; + uint8_t dev_specific; + uint8_t block_descr_len; +}; + +struct scsi_mode_hdr_10 +{ + uint8_t datalen[2]; + uint8_t medium_type; + uint8_t dev_specific; + uint8_t reserved[2]; + uint8_t block_descr_len[2]; +}; + +struct scsi_mode_block_descr +{ + uint8_t density_code; + uint8_t num_blocks[3]; + uint8_t reserved; + uint8_t block_len[3]; +}; + +struct scsi_log_sense +{ + uint8_t opcode; + uint8_t byte2; +#define SLS_SP 0x01 +#define SLS_PPC 0x02 + uint8_t page; +#define SLS_PAGE_CODE 0x3F +#define SLS_ALL_PAGES_PAGE 0x00 +#define SLS_OVERRUN_PAGE 0x01 +#define SLS_ERROR_WRITE_PAGE 0x02 +#define SLS_ERROR_READ_PAGE 0x03 +#define SLS_ERROR_READREVERSE_PAGE 0x04 +#define SLS_ERROR_VERIFY_PAGE 0x05 +#define SLS_ERROR_NONMEDIUM_PAGE 0x06 +#define SLS_ERROR_LASTN_PAGE 0x07 +#define SLS_PAGE_CTRL_MASK 0xC0 +#define SLS_PAGE_CTRL_THRESHOLD 0x00 +#define SLS_PAGE_CTRL_CUMULATIVE 0x40 +#define SLS_PAGE_CTRL_THRESH_DEFAULT 0x80 +#define SLS_PAGE_CTRL_CUMUL_DEFAULT 0xC0 + uint8_t reserved[2]; + uint8_t paramptr[2]; + uint8_t length[2]; + uint8_t control; +}; + +struct scsi_log_select +{ + uint8_t opcode; + uint8_t byte2; +/* SLS_SP 0x01 */ +#define SLS_PCR 0x02 + uint8_t page; +/* SLS_PAGE_CTRL_MASK 0xC0 */ +/* SLS_PAGE_CTRL_THRESHOLD 0x00 */ +/* SLS_PAGE_CTRL_CUMULATIVE 0x40 */ +/* SLS_PAGE_CTRL_THRESH_DEFAULT 0x80 */ +/* SLS_PAGE_CTRL_CUMUL_DEFAULT 0xC0 */ + uint8_t reserved[4]; + uint8_t length[2]; + uint8_t control; +}; + +struct scsi_log_header +{ + uint8_t page; + uint8_t reserved; + uint8_t datalen[2]; +}; + +struct scsi_log_param_header { + uint8_t param_code[2]; + uint8_t param_control; +#define SLP_LP 0x01 +#define SLP_LBIN 0x02 +#define SLP_TMC_MASK 0x0C +#define SLP_TMC_ALWAYS 0x00 +#define SLP_TMC_EQUAL 0x04 +#define SLP_TMC_NOTEQUAL 0x08 +#define SLP_TMC_GREATER 0x0C +#define SLP_ETC 0x10 +#define SLP_TSD 0x20 +#define SLP_DS 0x40 +#define SLP_DU 0x80 + uint8_t param_len; +}; + +struct scsi_control_page { + uint8_t page_code; + uint8_t page_length; + uint8_t rlec; +#define SCB_RLEC 0x01 /*Report Log Exception Cond*/ + uint8_t queue_flags; +#define SCP_QUEUE_ALG_MASK 0xF0 +#define SCP_QUEUE_ALG_RESTRICTED 0x00 +#define SCP_QUEUE_ALG_UNRESTRICTED 0x10 +#define SCP_QUEUE_ERR 0x02 /*Queued I/O aborted for CACs*/ +#define SCP_QUEUE_DQUE 0x01 /*Queued I/O disabled*/ + uint8_t eca_and_aen; +#define SCP_EECA 0x80 /*Enable Extended CA*/ +#define SCP_RAENP 0x04 /*Ready AEN Permission*/ +#define SCP_UAAENP 0x02 /*UA AEN Permission*/ +#define SCP_EAENP 0x01 /*Error AEN Permission*/ + uint8_t reserved; + uint8_t aen_holdoff_period[2]; +}; + +struct scsi_reserve +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused[2]; + uint8_t length; + uint8_t control; +}; + +struct scsi_release +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused[2]; + uint8_t length; + uint8_t control; +}; + +struct scsi_prevent +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused[2]; + uint8_t how; + uint8_t control; +}; +#define PR_PREVENT 0x01 +#define PR_ALLOW 0x00 + +struct scsi_sync_cache +{ + uint8_t opcode; + uint8_t byte2; + uint8_t begin_lba[4]; + uint8_t reserved; + uint8_t lb_count[2]; + uint8_t control; +}; + + +struct scsi_changedef +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused1; + uint8_t how; + uint8_t unused[4]; + uint8_t datalen; + uint8_t control; +}; + +struct scsi_read_buffer +{ + uint8_t opcode; + uint8_t byte2; +#define RWB_MODE 0x07 +#define RWB_MODE_HDR_DATA 0x00 +#define RWB_MODE_DATA 0x02 +#define RWB_MODE_DOWNLOAD 0x04 +#define RWB_MODE_DOWNLOAD_SAVE 0x05 + uint8_t buffer_id; + uint8_t offset[3]; + uint8_t length[3]; + uint8_t control; +}; + +struct scsi_write_buffer +{ + uint8_t opcode; + uint8_t byte2; + uint8_t buffer_id; + uint8_t offset[3]; + uint8_t length[3]; + uint8_t control; +}; + +struct scsi_rw_6 +{ + uint8_t opcode; + uint8_t addr[3]; +/* only 5 bits are valid in the MSB address byte */ +#define SRW_TOPADDR 0x1F + uint8_t length; + uint8_t control; +}; + +struct scsi_rw_10 +{ + uint8_t opcode; +#define SRW10_RELADDR 0x01 +#define SRW10_FUA 0x08 +#define SRW10_DPO 0x10 + uint8_t byte2; + uint8_t addr[4]; + uint8_t reserved; + uint8_t length[2]; + uint8_t control; +}; + +struct scsi_rw_12 +{ + uint8_t opcode; +#define SRW12_RELADDR 0x01 +#define SRW12_FUA 0x08 +#define SRW12_DPO 0x10 + uint8_t byte2; + uint8_t addr[4]; + uint8_t length[4]; + uint8_t reserved; + uint8_t control; +}; + +struct scsi_start_stop_unit +{ + uint8_t opcode; + uint8_t byte2; +#define SSS_IMMED 0x01 + uint8_t reserved[2]; + uint8_t how; +#define SSS_START 0x01 +#define SSS_LOEJ 0x02 + uint8_t control; +}; + +#define SC_SCSI_1 0x01 +#define SC_SCSI_2 0x03 + +/* + * Opcodes + */ + +#define TEST_UNIT_READY 0x00 +#define REQUEST_SENSE 0x03 +#define READ_6 0x08 +#define WRITE_6 0x0a +#define INQUIRY 0x12 +#define MODE_SELECT_6 0x15 +#define MODE_SENSE_6 0x1a +#define START_STOP_UNIT 0x1b +#define START_STOP 0x1b +#define RESERVE 0x16 +#define RELEASE 0x17 +#define RECEIVE_DIAGNOSTIC 0x1c +#define SEND_DIAGNOSTIC 0x1d +#define PREVENT_ALLOW 0x1e +#define READ_CAPACITY 0x25 +#define READ_10 0x28 +#define WRITE_10 0x2a +#define POSITION_TO_ELEMENT 0x2b +#define SYNCHRONIZE_CACHE 0x35 +#define WRITE_BUFFER 0x3b +#define READ_BUFFER 0x3c +#define CHANGE_DEFINITION 0x40 +#define LOG_SELECT 0x4c +#define LOG_SENSE 0x4d +#ifdef XXXCAM +#define MODE_SENSE_10 0x5A +#endif +#define MODE_SELECT_10 0x55 +#define MOVE_MEDIUM 0xa5 +#define READ_12 0xa8 +#define WRITE_12 0xaa +#define READ_ELEMENT_STATUS 0xb8 + + +/* + * Device Types + */ +#define T_DIRECT 0x00 +#define T_SEQUENTIAL 0x01 +#define T_PRINTER 0x02 +#define T_PROCESSOR 0x03 +#define T_WORM 0x04 +#define T_CDROM 0x05 +#define T_SCANNER 0x06 +#define T_OPTICAL 0x07 +#define T_CHANGER 0x08 +#define T_COMM 0x09 +#define T_ASC0 0x0a +#define T_ASC1 0x0b +#define T_STORARRAY 0x0c +#define T_ENCLOSURE 0x0d +#define T_RBC 0x0e +#define T_OCRW 0x0f +#define T_NODEVICE 0x1F +#define T_ANY 0xFF /* Used in Quirk table matches */ + +#define T_REMOV 1 +#define T_FIXED 0 + +/* + * This length is the initial inquiry length used by the probe code, as + * well as the legnth necessary for aic_print_inquiry() to function + * correctly. If either use requires a different length in the future, + * the two values should be de-coupled. + */ +#define SHORT_INQUIRY_LENGTH 36 + +struct scsi_inquiry_data +{ + uint8_t device; +#define SID_TYPE(inq_data) ((inq_data)->device & 0x1f) +#define SID_QUAL(inq_data) (((inq_data)->device & 0xE0) >> 5) +#define SID_QUAL_LU_CONNECTED 0x00 /* + * The specified peripheral device + * type is currently connected to + * logical unit. If the target cannot + * determine whether or not a physical + * device is currently connected, it + * shall also use this peripheral + * qualifier when returning the INQUIRY + * data. This peripheral qualifier + * does not mean that the device is + * ready for access by the initiator. + */ +#define SID_QUAL_LU_OFFLINE 0x01 /* + * The target is capable of supporting + * the specified peripheral device type + * on this logical unit; however, the + * physical device is not currently + * connected to this logical unit. + */ +#define SID_QUAL_RSVD 0x02 +#define SID_QUAL_BAD_LU 0x03 /* + * The target is not capable of + * supporting a physical device on + * this logical unit. For this + * peripheral qualifier the peripheral + * device type shall be set to 1Fh to + * provide compatibility with previous + * versions of SCSI. All other + * peripheral device type values are + * reserved for this peripheral + * qualifier. + */ +#define SID_QUAL_IS_VENDOR_UNIQUE(inq_data) ((SID_QUAL(inq_data) & 0x08) != 0) + uint8_t dev_qual2; +#define SID_QUAL2 0x7F +#define SID_IS_REMOVABLE(inq_data) (((inq_data)->dev_qual2 & 0x80) != 0) + uint8_t version; +#define SID_ANSI_REV(inq_data) ((inq_data)->version & 0x07) +#define SCSI_REV_0 0 +#define SCSI_REV_CCS 1 +#define SCSI_REV_2 2 +#define SCSI_REV_SPC 3 +#define SCSI_REV_SPC2 4 + +#define SID_ECMA 0x38 +#define SID_ISO 0xC0 + uint8_t response_format; +#define SID_AENC 0x80 +#define SID_TrmIOP 0x40 + uint8_t additional_length; + uint8_t reserved[2]; + uint8_t flags; +#define SID_SftRe 0x01 +#define SID_CmdQue 0x02 +#define SID_Linked 0x08 +#define SID_Sync 0x10 +#define SID_WBus16 0x20 +#define SID_WBus32 0x40 +#define SID_RelAdr 0x80 +#define SID_VENDOR_SIZE 8 + char vendor[SID_VENDOR_SIZE]; +#define SID_PRODUCT_SIZE 16 + char product[SID_PRODUCT_SIZE]; +#define SID_REVISION_SIZE 4 + char revision[SID_REVISION_SIZE]; + /* + * The following fields were taken from SCSI Primary Commands - 2 + * (SPC-2) Revision 14, Dated 11 November 1999 + */ +#define SID_VENDOR_SPECIFIC_0_SIZE 20 + uint8_t vendor_specific0[SID_VENDOR_SPECIFIC_0_SIZE]; + /* + * An extension of SCSI Parallel Specific Values + */ +#define SID_SPI_IUS 0x01 +#define SID_SPI_QAS 0x02 +#define SID_SPI_CLOCK_ST 0x00 +#define SID_SPI_CLOCK_DT 0x04 +#define SID_SPI_CLOCK_DT_ST 0x0C +#define SID_SPI_MASK 0x0F + uint8_t spi3data; + uint8_t reserved2; + /* + * Version Descriptors, stored 2 byte values. + */ + uint8_t version1[2]; + uint8_t version2[2]; + uint8_t version3[2]; + uint8_t version4[2]; + uint8_t version5[2]; + uint8_t version6[2]; + uint8_t version7[2]; + uint8_t version8[2]; + + uint8_t reserved3[22]; + +#define SID_VENDOR_SPECIFIC_1_SIZE 160 + uint8_t vendor_specific1[SID_VENDOR_SPECIFIC_1_SIZE]; +}; + +struct scsi_vpd_unit_serial_number +{ + uint8_t device; + uint8_t page_code; +#define SVPD_UNIT_SERIAL_NUMBER 0x80 + uint8_t reserved; + uint8_t length; /* serial number length */ +#define SVPD_SERIAL_NUM_SIZE 251 + uint8_t serial_num[SVPD_SERIAL_NUM_SIZE]; +}; + +struct scsi_read_capacity +{ + uint8_t opcode; + uint8_t byte2; + uint8_t addr[4]; + uint8_t unused[3]; + uint8_t control; +}; + +struct scsi_read_capacity_data +{ + uint8_t addr[4]; + uint8_t length[4]; +}; + +struct scsi_report_luns +{ + uint8_t opcode; + uint8_t byte2; + uint8_t unused[3]; + uint8_t addr[4]; + uint8_t control; +}; + +struct scsi_report_luns_data { + uint8_t length[4]; /* length of LUN inventory, in bytes */ + uint8_t reserved[4]; /* unused */ + /* + * LUN inventory- we only support the type zero form for now. + */ + struct { + uint8_t lundata[8]; + } luns[1]; +}; +#define RPL_LUNDATA_ATYP_MASK 0xc0 /* MBZ for type 0 lun */ +#define RPL_LUNDATA_T0LUN 1 /* @ lundata[1] */ + + +struct scsi_sense_data +{ + uint8_t error_code; +#define SSD_ERRCODE 0x7F +#define SSD_CURRENT_ERROR 0x70 +#define SSD_DEFERRED_ERROR 0x71 +#define SSD_ERRCODE_VALID 0x80 + uint8_t segment; + uint8_t flags; +#define SSD_KEY 0x0F +#define SSD_KEY_NO_SENSE 0x00 +#define SSD_KEY_RECOVERED_ERROR 0x01 +#define SSD_KEY_NOT_READY 0x02 +#define SSD_KEY_MEDIUM_ERROR 0x03 +#define SSD_KEY_HARDWARE_ERROR 0x04 +#define SSD_KEY_ILLEGAL_REQUEST 0x05 +#define SSD_KEY_UNIT_ATTENTION 0x06 +#define SSD_KEY_DATA_PROTECT 0x07 +#define SSD_KEY_BLANK_CHECK 0x08 +#define SSD_KEY_Vendor_Specific 0x09 +#define SSD_KEY_COPY_ABORTED 0x0a +#define SSD_KEY_ABORTED_COMMAND 0x0b +#define SSD_KEY_EQUAL 0x0c +#define SSD_KEY_VOLUME_OVERFLOW 0x0d +#define SSD_KEY_MISCOMPARE 0x0e +#define SSD_KEY_RESERVED 0x0f +#define SSD_ILI 0x20 +#define SSD_EOM 0x40 +#define SSD_FILEMARK 0x80 + uint8_t info[4]; + uint8_t extra_len; + uint8_t cmd_spec_info[4]; + uint8_t add_sense_code; + uint8_t add_sense_code_qual; + uint8_t fru; + uint8_t sense_key_spec[3]; +#define SSD_SCS_VALID 0x80 +#define SSD_FIELDPTR_CMD 0x40 +#define SSD_BITPTR_VALID 0x08 +#define SSD_BITPTR_VALUE 0x07 +#define SSD_MIN_SIZE 18 + uint8_t extra_bytes[14]; +#define SSD_FULL_SIZE sizeof(struct scsi_sense_data) +}; + +struct scsi_mode_header_6 +{ + uint8_t data_length; /* Sense data length */ + uint8_t medium_type; + uint8_t dev_spec; + uint8_t blk_desc_len; +}; + +struct scsi_mode_header_10 +{ + uint8_t data_length[2];/* Sense data length */ + uint8_t medium_type; + uint8_t dev_spec; + uint8_t unused[2]; + uint8_t blk_desc_len[2]; +}; + +struct scsi_mode_page_header +{ + uint8_t page_code; + uint8_t page_length; +}; + +struct scsi_mode_blk_desc +{ + uint8_t density; + uint8_t nblocks[3]; + uint8_t reserved; + uint8_t blklen[3]; +}; + +#define SCSI_DEFAULT_DENSITY 0x00 /* use 'default' density */ +#define SCSI_SAME_DENSITY 0x7f /* use 'same' density- >= SCSI-2 only */ + + +/* + * Status Byte + */ +#define SCSI_STATUS_OK 0x00 +#define SCSI_STATUS_CHECK_COND 0x02 +#define SCSI_STATUS_COND_MET 0x04 +#define SCSI_STATUS_BUSY 0x08 +#define SCSI_STATUS_INTERMED 0x10 +#define SCSI_STATUS_INTERMED_COND_MET 0x14 +#define SCSI_STATUS_RESERV_CONFLICT 0x18 +#define SCSI_STATUS_CMD_TERMINATED 0x22 /* Obsolete in SAM-2 */ +#define SCSI_STATUS_QUEUE_FULL 0x28 +#define SCSI_STATUS_ACA_ACTIVE 0x30 +#define SCSI_STATUS_TASK_ABORTED 0x40 + +struct scsi_inquiry_pattern { + uint8_t type; + uint8_t media_type; +#define SIP_MEDIA_REMOVABLE 0x01 +#define SIP_MEDIA_FIXED 0x02 + const char *vendor; + const char *product; + const char *revision; +}; + +struct scsi_static_inquiry_pattern { + uint8_t type; + uint8_t media_type; + char vendor[SID_VENDOR_SIZE+1]; + char product[SID_PRODUCT_SIZE+1]; + char revision[SID_REVISION_SIZE+1]; +}; + +struct scsi_sense_quirk_entry { + struct scsi_inquiry_pattern inq_pat; + int num_sense_keys; + int num_ascs; + struct sense_key_table_entry *sense_key_info; + struct asc_table_entry *asc_info; +}; + +struct sense_key_table_entry { + uint8_t sense_key; + uint32_t action; + const char *desc; +}; + +struct asc_table_entry { + uint8_t asc; + uint8_t ascq; + uint32_t action; + const char *desc; +}; + +struct op_table_entry { + uint8_t opcode; + uint16_t opmask; + const char *desc; +}; + +struct scsi_op_quirk_entry { + struct scsi_inquiry_pattern inq_pat; + int num_ops; + struct op_table_entry *op_table; +}; + +typedef enum { + SSS_FLAG_NONE = 0x00, + SSS_FLAG_PRINT_COMMAND = 0x01 +} scsi_sense_string_flags; + +extern const char *scsi_sense_key_text[]; + +/************************* Large Disk Handling ********************************/ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) +static __inline int aic_sector_div(u_long capacity, int heads, int sectors); + +static __inline int +aic_sector_div(u_long capacity, int heads, int sectors) +{ + return (capacity / (heads * sectors)); +} +#else +static __inline int aic_sector_div(sector_t capacity, int heads, int sectors); + +static __inline int +aic_sector_div(sector_t capacity, int heads, int sectors) +{ + /* ugly, ugly sector_div calling convention.. */ + sector_div(capacity, (heads * sectors)); + return (int)capacity; +} +#endif + +/**************************** Module Library Hack *****************************/ +/* + * What we'd like to do is have a single "scsi library" module that both the + * aic7xxx and aic79xx drivers could load and depend on. A cursory examination + * of implementing module dependencies in Linux (handling the install and + * initrd cases) does not look promissing. For now, we just duplicate this + * code in both drivers using a simple symbol renaming scheme that hides this + * hack from the drivers. + */ +#define AIC_LIB_ENTRY_CONCAT(x, prefix) prefix ## x +#define AIC_LIB_ENTRY_EXPAND(x, prefix) AIC_LIB_ENTRY_CONCAT(x, prefix) +#define AIC_LIB_ENTRY(x) AIC_LIB_ENTRY_EXPAND(x, AIC_LIB_PREFIX) + +#define aic_sense_desc AIC_LIB_ENTRY(_sense_desc) +#define aic_sense_error_action AIC_LIB_ENTRY(_sense_error_action) +#define aic_error_action AIC_LIB_ENTRY(_error_action) +#define aic_op_desc AIC_LIB_ENTRY(_op_desc) +#define aic_cdb_string AIC_LIB_ENTRY(_cdb_string) +#define aic_print_inquiry AIC_LIB_ENTRY(_print_inquiry) +#define aic_calc_syncsrate AIC_LIB_ENTRY(_calc_syncrate) +#define aic_calc_syncparam AIC_LIB_ENTRY(_calc_syncparam) +#define aic_calc_speed AIC_LIB_ENTRY(_calc_speed) +#define aic_inquiry_match AIC_LIB_ENTRY(_inquiry_match) +#define aic_static_inquiry_match AIC_LIB_ENTRY(_static_inquiry_match) +#define aic_parse_brace_option AIC_LIB_ENTRY(_parse_brace_option) + +/******************************************************************************/ + +void aic_sense_desc(int /*sense_key*/, int /*asc*/, + int /*ascq*/, struct scsi_inquiry_data*, + const char** /*sense_key_desc*/, + const char** /*asc_desc*/); +aic_sense_action aic_sense_error_action(struct scsi_sense_data*, + struct scsi_inquiry_data*, + uint32_t /*sense_flags*/); +uint32_t aic_error_action(struct scsi_cmnd *, + struct scsi_inquiry_data *, + cam_status, u_int); + +#define SF_RETRY_UA 0x01 +#define SF_NO_PRINT 0x02 +#define SF_QUIET_IR 0x04 /* Be quiet about Illegal Request reponses */ +#define SF_PRINT_ALWAYS 0x08 + + +const char * aic_op_desc(uint16_t /*opcode*/, struct scsi_inquiry_data*); +char * aic_cdb_string(uint8_t* /*cdb_ptr*/, char* /*cdb_string*/, + size_t /*len*/); +void aic_print_inquiry(struct scsi_inquiry_data*); + +u_int aic_calc_syncsrate(u_int /*period_factor*/); +u_int aic_calc_syncparam(u_int /*period*/); +u_int aic_calc_speed(u_int width, u_int period, u_int offset, + u_int min_rate); + +int aic_inquiry_match(caddr_t /*inqbuffer*/, + caddr_t /*table_entry*/); +int aic_static_inquiry_match(caddr_t /*inqbuffer*/, + caddr_t /*table_entry*/); + +typedef void aic_option_callback_t(u_long, int, int, int32_t); +char * aic_parse_brace_option(char *opt_name, char *opt_arg, + char *end, int depth, + aic_option_callback_t *, u_long); + +static __inline void scsi_extract_sense(struct scsi_sense_data *sense, + int *error_code, int *sense_key, + int *asc, int *ascq); +static __inline void scsi_ulto2b(uint32_t val, uint8_t *bytes); +static __inline void scsi_ulto3b(uint32_t val, uint8_t *bytes); +static __inline void scsi_ulto4b(uint32_t val, uint8_t *bytes); +static __inline uint32_t scsi_2btoul(uint8_t *bytes); +static __inline uint32_t scsi_3btoul(uint8_t *bytes); +static __inline int32_t scsi_3btol(uint8_t *bytes); +static __inline uint32_t scsi_4btoul(uint8_t *bytes); + +static __inline void scsi_extract_sense(struct scsi_sense_data *sense, + int *error_code, int *sense_key, + int *asc, int *ascq) +{ + *error_code = sense->error_code & SSD_ERRCODE; + *sense_key = sense->flags & SSD_KEY; + *asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0; + *ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0; +} + +static __inline void +scsi_ulto2b(uint32_t val, uint8_t *bytes) +{ + + bytes[0] = (val >> 8) & 0xff; + bytes[1] = val & 0xff; +} + +static __inline void +scsi_ulto3b(uint32_t val, uint8_t *bytes) +{ + + bytes[0] = (val >> 16) & 0xff; + bytes[1] = (val >> 8) & 0xff; + bytes[2] = val & 0xff; +} + +static __inline void +scsi_ulto4b(uint32_t val, uint8_t *bytes) +{ + + bytes[0] = (val >> 24) & 0xff; + bytes[1] = (val >> 16) & 0xff; + bytes[2] = (val >> 8) & 0xff; + bytes[3] = val & 0xff; +} + +static __inline uint32_t +scsi_2btoul(uint8_t *bytes) +{ + uint32_t rv; + + rv = (bytes[0] << 8) | + bytes[1]; + return (rv); +} + +static __inline uint32_t +scsi_3btoul(uint8_t *bytes) +{ + uint32_t rv; + + rv = (bytes[0] << 16) | + (bytes[1] << 8) | + bytes[2]; + return (rv); +} + +static __inline int32_t +scsi_3btol(uint8_t *bytes) +{ + uint32_t rc = scsi_3btoul(bytes); + + if (rc & 0x00800000) + rc |= 0xff000000; + + return (int32_t) rc; +} + +static __inline uint32_t +scsi_4btoul(uint8_t *bytes) +{ + uint32_t rv; + + rv = (bytes[0] << 24) | + (bytes[1] << 16) | + (bytes[2] << 8) | + bytes[3]; + return (rv); +} + +/* Macros for generating the elements of the PCI ID tables. */ + +#define GETID(v, s) (unsigned)(((v) >> (s)) & 0xFFFF ?: PCI_ANY_ID) + +#define ID_C(x, c) \ +{ \ + GETID(x,32), GETID(x,48), GETID(x,0), GETID(x,16), \ + (c) << 8, 0xFFFF00, 0 \ +} + +#define ID2C(x) \ + ID_C(x, PCI_CLASS_STORAGE_SCSI), \ + ID_C(x, PCI_CLASS_STORAGE_RAID) + +#define IDIROC(x) ((x) | ~ID_ALL_IROC_MASK) + +/* Generate IDs for all 16 possibilites. + * The argument has already masked out + * the 4 least significant bits of the device id. + * (e.g., mask: ID_9005_GENERIC_MASK). + */ +#define ID16(x) \ + ID(x), \ + ID((x) | 0x0001000000000000ull), \ + ID((x) | 0x0002000000000000ull), \ + ID((x) | 0x0003000000000000ull), \ + ID((x) | 0x0004000000000000ull), \ + ID((x) | 0x0005000000000000ull), \ + ID((x) | 0x0006000000000000ull), \ + ID((x) | 0x0007000000000000ull), \ + ID((x) | 0x0008000000000000ull), \ + ID((x) | 0x0009000000000000ull), \ + ID((x) | 0x000A000000000000ull), \ + ID((x) | 0x000B000000000000ull), \ + ID((x) | 0x000C000000000000ull), \ + ID((x) | 0x000D000000000000ull), \ + ID((x) | 0x000E000000000000ull), \ + ID((x) | 0x000F000000000000ull) + +#endif /*_AICLIB_H */ -- cgit v1.2.3