From b0df54bb4c9df6c1b1633a9f990b718059cda394 Mon Sep 17 00:00:00 2001 From: "brking@us.ibm.com" Date: Tue, 1 Nov 2005 17:01:47 -0600 Subject: [SCSI] ipr: handle new adapter errors Add support for handling some new errors that may be returned by ipr adapters. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 83 ++++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 71 insertions(+), 12 deletions(-) (limited to 'drivers/scsi/ipr.c') diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index eae61d994b9..b773852b4ea 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -291,12 +291,18 @@ struct ipr_error_table_t ipr_error_table[] = { "3110: Device bus error, message or command phase"}, {0x04670400, 0, 1, "9091: Incorrect hardware configuration change has been detected"}, + {0x04678000, 0, 1, + "9073: Invalid multi-adapter configuration"}, {0x046E0000, 0, 1, "FFF4: Command to logical unit failed"}, {0x05240000, 1, 0, "Illegal request, invalid request type or request packet"}, {0x05250000, 0, 0, "Illegal request, invalid resource handle"}, + {0x05258000, 0, 0, + "Illegal request, commands not allowed to this device"}, + {0x05258100, 0, 0, + "Illegal request, command not allowed to a secondary adapter"}, {0x05260000, 0, 0, "Illegal request, invalid field in parameter list"}, {0x05260100, 0, 0, @@ -305,6 +311,8 @@ struct ipr_error_table_t ipr_error_table[] = { "Illegal request, parameter value invalid"}, {0x052C0000, 0, 0, "Illegal request, command sequence error"}, + {0x052C8000, 1, 0, + "Illegal request, dual adapter support not enabled"}, {0x06040500, 0, 1, "9031: Array protection temporarily suspended, protection resuming"}, {0x06040600, 0, 1, @@ -321,18 +329,26 @@ struct ipr_error_table_t ipr_error_table[] = { "3029: A device replacement has occurred"}, {0x064C8000, 0, 1, "9051: IOA cache data exists for a missing or failed device"}, + {0x064C8100, 0, 1, + "9055: Auxiliary cache IOA contains cache data needed by the primary IOA"}, {0x06670100, 0, 1, "9025: Disk unit is not supported at its physical location"}, {0x06670600, 0, 1, "3020: IOA detected a SCSI bus configuration error"}, {0x06678000, 0, 1, "3150: SCSI bus configuration error"}, + {0x06678100, 0, 1, + "9074: Asymmetric advanced function disk configuration"}, {0x06690200, 0, 1, "9041: Array protection temporarily suspended"}, {0x06698200, 0, 1, "9042: Corrupt array parity detected on specified device"}, {0x066B0200, 0, 1, "9030: Array no longer protected due to missing or failed disk unit"}, + {0x066B8000, 0, 1, + "9071: Link operational transition"}, + {0x066B8100, 0, 1, + "9072: Link not operational transition"}, {0x066B8200, 0, 1, "9032: Array exposed but still protected"}, {0x07270000, 0, 0, @@ -1051,31 +1067,69 @@ static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg, } /** - * ipr_log_generic_error - Log an adapter error. - * @ioa_cfg: ioa config struct - * @hostrcb: hostrcb struct + * ipr_log_hex_data - Log additional hex IOA error data. + * @data: IOA error data + * @len: data length * * Return value: * none **/ -static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg, - struct ipr_hostrcb *hostrcb) +static void ipr_log_hex_data(u32 *data, int len) { int i; - int ioa_data_len = be32_to_cpu(hostrcb->hcam.length); - if (ioa_data_len == 0) + if (len == 0) return; - for (i = 0; i < ioa_data_len / 4; i += 4) { + for (i = 0; i < len / 4; i += 4) { ipr_err("%08X: %08X %08X %08X %08X\n", i*4, - be32_to_cpu(hostrcb->hcam.u.raw.data[i]), - be32_to_cpu(hostrcb->hcam.u.raw.data[i+1]), - be32_to_cpu(hostrcb->hcam.u.raw.data[i+2]), - be32_to_cpu(hostrcb->hcam.u.raw.data[i+3])); + be32_to_cpu(data[i]), + be32_to_cpu(data[i+1]), + be32_to_cpu(data[i+2]), + be32_to_cpu(data[i+3])); } } +/** + * ipr_log_dual_ioa_error - Log a dual adapter error. + * @ioa_cfg: ioa config struct + * @hostrcb: hostrcb struct + * + * Return value: + * none + **/ +static void ipr_log_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg, + struct ipr_hostrcb *hostrcb) +{ + struct ipr_hostrcb_type_07_error *error; + + error = &hostrcb->hcam.u.error.u.type_07_error; + error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; + + ipr_err("%s\n", error->failure_reason); + ipr_err("Remote Adapter VPD:\n"); + ipr_log_vpd(&error->vpd); + ipr_log_hex_data(error->data, + be32_to_cpu(hostrcb->hcam.length) - + (offsetof(struct ipr_hostrcb_error, u) + + offsetof(struct ipr_hostrcb_type_07_error, data))); +} + +/** + * ipr_log_generic_error - Log an adapter error. + * @ioa_cfg: ioa config struct + * @hostrcb: hostrcb struct + * + * Return value: + * none + **/ +static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg, + struct ipr_hostrcb *hostrcb) +{ + ipr_log_hex_data(hostrcb->hcam.u.raw.data, + be32_to_cpu(hostrcb->hcam.length)); +} + /** * ipr_get_error - Find the specfied IOASC in the ipr_error_table. * @ioasc: IOASC @@ -1161,6 +1215,9 @@ static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg, case IPR_HOST_RCB_OVERLAY_ID_6: ipr_log_array_error(ioa_cfg, hostrcb); break; + case IPR_HOST_RCB_OVERLAY_ID_7: + ipr_log_dual_ioa_error(ioa_cfg, hostrcb); + break; case IPR_HOST_RCB_OVERLAY_ID_1: case IPR_HOST_RCB_OVERLAY_ID_DEFAULT: default: @@ -3886,6 +3943,7 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, scsi_cmd->result |= (DID_IMM_RETRY << 16); break; case IPR_IOASC_IR_RESOURCE_HANDLE: + case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA: scsi_cmd->result |= (DID_NO_CONNECT << 16); break; case IPR_IOASC_HW_SEL_TIMEOUT: @@ -3898,6 +3956,7 @@ static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, scsi_cmd->result |= (DID_IMM_RETRY << 16); break; case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */ + case IPR_IOASA_IR_DUAL_IOA_DISABLED: scsi_cmd->result |= (DID_PASSTHROUGH << 16); break; case IPR_IOASC_BUS_WAS_RESET: -- cgit v1.2.3