From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/sym53c416.c | 881 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 881 insertions(+) create mode 100644 drivers/scsi/sym53c416.c (limited to 'drivers/scsi/sym53c416.c') diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c new file mode 100644 index 00000000000..f26c3a29e63 --- /dev/null +++ b/drivers/scsi/sym53c416.c @@ -0,0 +1,881 @@ +/* + * sym53c416.c + * Low-level SCSI driver for sym53c416 chip. + * Copyright (C) 1998 Lieven Willems (lw_linux@hotmail.com) + * + * Changes : + * + * Marcelo Tosatti : Added io_request_lock locking + * Alan Cox : Cleaned up code formatting + * Fixed an irq locking bug + * Added ISAPnP support + * Bjoern A. Zeeb : Initial irq locking updates + * Added another card with ISAPnP support + * + * LILO command line usage: sym53c416=[,] + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include "sym53c416.h" + +#define VERSION_STRING "Version 1.0.0-ac" + +#define TC_LOW 0x00 /* Transfer counter low */ +#define TC_MID 0x01 /* Transfer counter mid */ +#define SCSI_FIFO 0x02 /* SCSI FIFO register */ +#define COMMAND_REG 0x03 /* Command Register */ +#define STATUS_REG 0x04 /* Status Register (READ) */ +#define DEST_BUS_ID 0x04 /* Destination Bus ID (WRITE) */ +#define INT_REG 0x05 /* Interrupt Register (READ) */ +#define TOM 0x05 /* Time out multiplier (WRITE) */ +#define STP 0x06 /* Synchronous Transfer period */ +#define SYNC_OFFSET 0x07 /* Synchronous Offset */ +#define CONF_REG_1 0x08 /* Configuration register 1 */ +#define CONF_REG_2 0x0B /* Configuration register 2 */ +#define CONF_REG_3 0x0C /* Configuration register 3 */ +#define CONF_REG_4 0x0D /* Configuration register 4 */ +#define TC_HIGH 0x0E /* Transfer counter high */ +#define PIO_FIFO_1 0x10 /* PIO FIFO register 1 */ +#define PIO_FIFO_2 0x11 /* PIO FIFO register 2 */ +#define PIO_FIFO_3 0x12 /* PIO FIFO register 3 */ +#define PIO_FIFO_4 0x13 /* PIO FIFO register 4 */ +#define PIO_FIFO_CNT 0x14 /* PIO FIFO count */ +#define PIO_INT_REG 0x15 /* PIO interrupt register */ +#define CONF_REG_5 0x16 /* Configuration register 5 */ +#define FEATURE_EN 0x1D /* Feature Enable register */ + +/* Configuration register 1 entries: */ +/* Bits 2-0: SCSI ID of host adapter */ +#define SCM 0x80 /* Slow Cable Mode */ +#define SRID 0x40 /* SCSI Reset Interrupt Disable */ +#define PTM 0x20 /* Parity Test Mode */ +#define EPC 0x10 /* Enable Parity Checking */ +#define CTME 0x08 /* Special Test Mode */ + +/* Configuration register 2 entries: */ +#define FE 0x40 /* Features Enable */ +#define SCSI2 0x08 /* SCSI 2 Enable */ +#define TBPA 0x04 /* Target Bad Parity Abort */ + +/* Configuration register 3 entries: */ +#define IDMRC 0x80 /* ID Message Reserved Check */ +#define QTE 0x40 /* Queue Tag Enable */ +#define CDB10 0x20 /* Command Descriptor Block 10 */ +#define FSCSI 0x10 /* FastSCSI */ +#define FCLK 0x08 /* FastClock */ + +/* Configuration register 4 entries: */ +#define RBS 0x08 /* Register bank select */ +#define EAN 0x04 /* Enable Active Negotiation */ + +/* Configuration register 5 entries: */ +#define LPSR 0x80 /* Lower Power SCSI Reset */ +#define IE 0x20 /* Interrupt Enable */ +#define LPM 0x02 /* Low Power Mode */ +#define WSE0 0x01 /* 0WS Enable */ + +/* Interrupt register entries: */ +#define SRST 0x80 /* SCSI Reset */ +#define ILCMD 0x40 /* Illegal Command */ +#define DIS 0x20 /* Disconnect */ +#define BS 0x10 /* Bus Service */ +#define FC 0x08 /* Function Complete */ +#define RESEL 0x04 /* Reselected */ +#define SI 0x03 /* Selection Interrupt */ + +/* Status Register Entries: */ +#define SCI 0x80 /* SCSI Core Int */ +#define GE 0x40 /* Gross Error */ +#define PE 0x20 /* Parity Error */ +#define TC 0x10 /* Terminal Count */ +#define VGC 0x08 /* Valid Group Code */ +#define PHBITS 0x07 /* Phase bits */ + +/* PIO Interrupt Register Entries: */ +#define SCI 0x80 /* SCSI Core Int */ +#define PFI 0x40 /* PIO FIFO Interrupt */ +#define FULL 0x20 /* PIO FIFO Full */ +#define EMPTY 0x10 /* PIO FIFO Empty */ +#define CE 0x08 /* Collision Error */ +#define OUE 0x04 /* Overflow / Underflow error */ +#define FIE 0x02 /* Full Interrupt Enable */ +#define EIE 0x01 /* Empty Interrupt Enable */ + +/* SYM53C416 SCSI phases (lower 3 bits of SYM53C416_STATUS_REG) */ +#define PHASE_DATA_OUT 0x00 +#define PHASE_DATA_IN 0x01 +#define PHASE_COMMAND 0x02 +#define PHASE_STATUS 0x03 +#define PHASE_RESERVED_1 0x04 +#define PHASE_RESERVED_2 0x05 +#define PHASE_MESSAGE_OUT 0x06 +#define PHASE_MESSAGE_IN 0x07 + +/* SYM53C416 core commands */ +#define NOOP 0x00 +#define FLUSH_FIFO 0x01 +#define RESET_CHIP 0x02 +#define RESET_SCSI_BUS 0x03 +#define DISABLE_SEL_RESEL 0x45 +#define RESEL_SEQ 0x40 +#define SEL_WITHOUT_ATN_SEQ 0x41 +#define SEL_WITH_ATN_SEQ 0x42 +#define SEL_WITH_ATN_AND_STOP_SEQ 0x43 +#define ENABLE_SEL_RESEL 0x44 +#define SEL_WITH_ATN3_SEQ 0x46 +#define RESEL3_SEQ 0x47 +#define SND_MSG 0x20 +#define SND_STAT 0x21 +#define SND_DATA 0x22 +#define DISCONNECT_SEQ 0x23 +#define TERMINATE_SEQ 0x24 +#define TARGET_COMM_COMPLETE_SEQ 0x25 +#define DISCONN 0x27 +#define RECV_MSG_SEQ 0x28 +#define RECV_CMD 0x29 +#define RECV_DATA 0x2A +#define RECV_CMD_SEQ 0x2B +#define TARGET_ABORT_PIO 0x04 +#define TRANSFER_INFORMATION 0x10 +#define INIT_COMM_COMPLETE_SEQ 0x11 +#define MSG_ACCEPTED 0x12 +#define TRANSFER_PAD 0x18 +#define SET_ATN 0x1A +#define RESET_ATN 0x1B +#define ILLEGAL 0xFF + +#define PIO_MODE 0x80 + +#define IO_RANGE 0x20 /* 0x00 - 0x1F */ +#define ID "sym53c416" /* Attention: copied to the sym53c416.h */ +#define PIO_SIZE 128 /* Size of PIO fifo is 128 bytes */ + +#define READ_TIMEOUT 150 +#define WRITE_TIMEOUT 150 + +#ifdef MODULE + +#define sym53c416_base sym53c416 +#define sym53c416_base_1 sym53c416_1 +#define sym53c416_base_2 sym53c416_2 +#define sym53c416_base_3 sym53c416_3 + +static unsigned int sym53c416_base[2] = {0,0}; +static unsigned int sym53c416_base_1[2] = {0,0}; +static unsigned int sym53c416_base_2[2] = {0,0}; +static unsigned int sym53c416_base_3[2] = {0,0}; + +#endif + +#define MAXHOSTS 4 + +#define SG_ADDRESS(buffer) ((char *) (page_address((buffer)->page)+(buffer)->offset)) + +enum phases +{ + idle, + data_out, + data_in, + command_ph, + status_ph, + message_out, + message_in +}; + +typedef struct +{ + int base; + int irq; + int scsi_id; +} host; + +static host hosts[MAXHOSTS] = { + {0, 0, SYM53C416_SCSI_ID}, + {0, 0, SYM53C416_SCSI_ID}, + {0, 0, SYM53C416_SCSI_ID}, + {0, 0, SYM53C416_SCSI_ID} + }; + +static int host_index = 0; +static char info[120]; +static Scsi_Cmnd *current_command = NULL; +static int fastpio = 1; + +static int probeaddrs[] = {0x200, 0x220, 0x240, 0}; + +static void sym53c416_set_transfer_counter(int base, unsigned int len) +{ + /* Program Transfer Counter */ + outb(len & 0x0000FF, base + TC_LOW); + outb((len & 0x00FF00) >> 8, base + TC_MID); + outb((len & 0xFF0000) >> 16, base + TC_HIGH); +} + +static DEFINE_SPINLOCK(sym53c416_lock); + +/* Returns the number of bytes read */ +static __inline__ unsigned int sym53c416_read(int base, unsigned char *buffer, unsigned int len) +{ + unsigned int orig_len = len; + unsigned long flags = 0; + unsigned int bytes_left; + unsigned long i; + int timeout = READ_TIMEOUT; + + /* Do transfer */ + spin_lock_irqsave(&sym53c416_lock, flags); + while(len && timeout) + { + bytes_left = inb(base + PIO_FIFO_CNT); /* Number of bytes in the PIO FIFO */ + if(fastpio && bytes_left > 3) + { + insl(base + PIO_FIFO_1, buffer, bytes_left >> 2); + buffer += bytes_left & 0xFC; + len -= bytes_left & 0xFC; + } + else if(bytes_left > 0) + { + len -= bytes_left; + for(; bytes_left > 0; bytes_left--) + *(buffer++) = inb(base + PIO_FIFO_1); + } + else + { + i = jiffies + timeout; + spin_unlock_irqrestore(&sym53c416_lock, flags); + while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & EMPTY) && timeout) + if(inb(base + PIO_INT_REG) & SCI) + timeout = 0; + spin_lock_irqsave(&sym53c416_lock, flags); + if(inb(base + PIO_INT_REG) & EMPTY) + timeout = 0; + } + } + spin_unlock_irqrestore(&sym53c416_lock, flags); + return orig_len - len; +} + +/* Returns the number of bytes written */ +static __inline__ unsigned int sym53c416_write(int base, unsigned char *buffer, unsigned int len) +{ + unsigned int orig_len = len; + unsigned long flags = 0; + unsigned int bufferfree; + unsigned long i; + unsigned int timeout = WRITE_TIMEOUT; + + /* Do transfer */ + spin_lock_irqsave(&sym53c416_lock, flags); + while(len && timeout) + { + bufferfree = PIO_SIZE - inb(base + PIO_FIFO_CNT); + if(bufferfree > len) + bufferfree = len; + if(fastpio && bufferfree > 3) + { + outsl(base + PIO_FIFO_1, buffer, bufferfree >> 2); + buffer += bufferfree & 0xFC; + len -= bufferfree & 0xFC; + } + else if(bufferfree > 0) + { + len -= bufferfree; + for(; bufferfree > 0; bufferfree--) + outb(*(buffer++), base + PIO_FIFO_1); + } + else + { + i = jiffies + timeout; + spin_unlock_irqrestore(&sym53c416_lock, flags); + while(time_before(jiffies, i) && (inb(base + PIO_INT_REG) & FULL) && timeout) + ; + spin_lock_irqsave(&sym53c416_lock, flags); + if(inb(base + PIO_INT_REG) & FULL) + timeout = 0; + } + } + spin_unlock_irqrestore(&sym53c416_lock, flags); + return orig_len - len; +} + +static irqreturn_t sym53c416_intr_handle(int irq, void *dev_id, + struct pt_regs *regs) +{ + struct Scsi_Host *dev = dev_id; + int base = 0; + int i; + unsigned long flags = 0; + unsigned char status_reg, pio_int_reg, int_reg; + struct scatterlist *sglist; + unsigned int sgcount; + unsigned int tot_trans = 0; + + /* We search the base address of the host adapter which caused the interrupt */ + /* FIXME: should pass dev_id sensibly as hosts[i] */ + for(i = 0; i < host_index && !base; i++) + if(irq == hosts[i].irq) + base = hosts[i].base; + /* If no adapter found, we cannot handle the interrupt. Leave a message */ + /* and continue. This should never happen... */ + if(!base) + { + printk(KERN_ERR "sym53c416: No host adapter defined for interrupt %d\n", irq); + return IRQ_NONE; + } + /* Now we have the base address and we can start handling the interrupt */ + + spin_lock_irqsave(dev->host_lock,flags); + status_reg = inb(base + STATUS_REG); + pio_int_reg = inb(base + PIO_INT_REG); + int_reg = inb(base + INT_REG); + spin_unlock_irqrestore(dev->host_lock, flags); + + /* First, we handle error conditions */ + if(int_reg & SCI) /* SCSI Reset */ + { + printk(KERN_DEBUG "sym53c416: Reset received\n"); + current_command->SCp.phase = idle; + current_command->result = DID_RESET << 16; + spin_lock_irqsave(dev->host_lock, flags); + current_command->scsi_done(current_command); + spin_unlock_irqrestore(dev->host_lock, flags); + goto out; + } + if(int_reg & ILCMD) /* Illegal Command */ + { + printk(KERN_WARNING "sym53c416: Illegal Command: 0x%02x.\n", inb(base + COMMAND_REG)); + current_command->SCp.phase = idle; + current_command->result = DID_ERROR << 16; + spin_lock_irqsave(dev->host_lock, flags); + current_command->scsi_done(current_command); + spin_unlock_irqrestore(dev->host_lock, flags); + goto out; + } + if(status_reg & GE) /* Gross Error */ + { + printk(KERN_WARNING "sym53c416: Controller reports gross error.\n"); + current_command->SCp.phase = idle; + current_command->result = DID_ERROR << 16; + spin_lock_irqsave(dev->host_lock, flags); + current_command->scsi_done(current_command); + spin_unlock_irqrestore(dev->host_lock, flags); + goto out; + } + if(status_reg & PE) /* Parity Error */ + { + printk(KERN_WARNING "sym53c416:SCSI parity error.\n"); + current_command->SCp.phase = idle; + current_command->result = DID_PARITY << 16; + spin_lock_irqsave(dev->host_lock, flags); + current_command->scsi_done(current_command); + spin_unlock_irqrestore(dev->host_lock, flags); + goto out; + } + if(pio_int_reg & (CE | OUE)) + { + printk(KERN_WARNING "sym53c416: PIO interrupt error.\n"); + current_command->SCp.phase = idle; + current_command->result = DID_ERROR << 16; + spin_lock_irqsave(dev->host_lock, flags); + current_command->scsi_done(current_command); + spin_unlock_irqrestore(dev->host_lock, flags); + goto out; + } + if(int_reg & DIS) /* Disconnect */ + { + if(current_command->SCp.phase != message_in) + current_command->result = DID_NO_CONNECT << 16; + else + current_command->result = (current_command->SCp.Status & 0xFF) | ((current_command->SCp.Message & 0xFF) << 8) | (DID_OK << 16); + current_command->SCp.phase = idle; + spin_lock_irqsave(dev->host_lock, flags); + current_command->scsi_done(current_command); + spin_unlock_irqrestore(dev->host_lock, flags); + goto out; + } + /* Now we handle SCSI phases */ + + switch(status_reg & PHBITS) /* Filter SCSI phase out of status reg */ + { + case PHASE_DATA_OUT: + { + if(int_reg & BS) + { + current_command->SCp.phase = data_out; + outb(FLUSH_FIFO, base + COMMAND_REG); + sym53c416_set_transfer_counter(base, current_command->request_bufflen); + outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG); + if(!current_command->use_sg) + tot_trans = sym53c416_write(base, current_command->request_buffer, current_command->request_bufflen); + else + { + sgcount = current_command->use_sg; + sglist = current_command->request_buffer; + while(sgcount--) + { + tot_trans += sym53c416_write(base, SG_ADDRESS(sglist), sglist->length); + sglist++; + } + } + if(tot_trans < current_command->underflow) + printk(KERN_WARNING "sym53c416: Underflow, wrote %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow); + } + break; + } + + case PHASE_DATA_IN: + { + if(int_reg & BS) + { + current_command->SCp.phase = data_in; + outb(FLUSH_FIFO, base + COMMAND_REG); + sym53c416_set_transfer_counter(base, current_command->request_bufflen); + outb(TRANSFER_INFORMATION | PIO_MODE, base + COMMAND_REG); + if(!current_command->use_sg) + tot_trans = sym53c416_read(base, current_command->request_buffer, current_command->request_bufflen); + else + { + sgcount = current_command->use_sg; + sglist = current_command->request_buffer; + while(sgcount--) + { + tot_trans += sym53c416_read(base, SG_ADDRESS(sglist), sglist->length); + sglist++; + } + } + if(tot_trans < current_command->underflow) + printk(KERN_WARNING "sym53c416: Underflow, read %d bytes, request for %d bytes.\n", tot_trans, current_command->underflow); + } + break; + } + + case PHASE_COMMAND: + { + current_command->SCp.phase = command_ph; + printk(KERN_ERR "sym53c416: Unknown interrupt in command phase.\n"); + break; + } + + case PHASE_STATUS: + { + current_command->SCp.phase = status_ph; + outb(FLUSH_FIFO, base + COMMAND_REG); + outb(INIT_COMM_COMPLETE_SEQ, base + COMMAND_REG); + break; + } + + case PHASE_RESERVED_1: + case PHASE_RESERVED_2: + { + printk(KERN_ERR "sym53c416: Reserved phase occurred.\n"); + break; + } + + case PHASE_MESSAGE_OUT: + { + current_command->SCp.phase = message_out; + outb(SET_ATN, base + COMMAND_REG); + outb(MSG_ACCEPTED, base + COMMAND_REG); + break; + } + + case PHASE_MESSAGE_IN: + { + current_command->SCp.phase = message_in; + current_command->SCp.Status = inb(base + SCSI_FIFO); + current_command->SCp.Message = inb(base + SCSI_FIFO); + if(current_command->SCp.Message == SAVE_POINTERS || current_command->SCp.Message == DISCONNECT) + outb(SET_ATN, base + COMMAND_REG); + outb(MSG_ACCEPTED, base + COMMAND_REG); + break; + } + } +out: + return IRQ_HANDLED; +} + +static void sym53c416_init(int base, int scsi_id) +{ + outb(RESET_CHIP, base + COMMAND_REG); + outb(NOOP, base + COMMAND_REG); + outb(0x99, base + TOM); /* Time out of 250 ms */ + outb(0x05, base + STP); + outb(0x00, base + SYNC_OFFSET); + outb(EPC | scsi_id, base + CONF_REG_1); + outb(FE | SCSI2 | TBPA, base + CONF_REG_2); + outb(IDMRC | QTE | CDB10 | FSCSI | FCLK, base + CONF_REG_3); + outb(0x83 | EAN, base + CONF_REG_4); + outb(IE | WSE0, base + CONF_REG_5); + outb(0, base + FEATURE_EN); +} + +static int sym53c416_probeirq(int base, int scsi_id) +{ + int irq, irqs; + unsigned long i; + + /* Clear interrupt register */ + inb(base + INT_REG); + /* Start probing for irq's */ + irqs = probe_irq_on(); + /* Reinit chip */ + sym53c416_init(base, scsi_id); + /* Cause interrupt */ + outb(NOOP, base + COMMAND_REG); + outb(ILLEGAL, base + COMMAND_REG); + outb(0x07, base + DEST_BUS_ID); + outb(0x00, base + DEST_BUS_ID); + /* Wait for interrupt to occur */ + i = jiffies + 20; + while(time_before(jiffies, i) && !(inb(base + STATUS_REG) & SCI)) + barrier(); + if(time_before_eq(i, jiffies)) /* timed out */ + return 0; + /* Get occurred irq */ + irq = probe_irq_off(irqs); + sym53c416_init(base, scsi_id); + return irq; +} + +/* Setup: sym53c416=base,irq */ +void sym53c416_setup(char *str, int *ints) +{ + int i; + + if(host_index >= MAXHOSTS) + { + printk(KERN_WARNING "sym53c416: Too many hosts defined\n"); + return; + } + if(ints[0] < 1 || ints[0] > 2) + { + printk(KERN_ERR "sym53c416: Wrong number of parameters:\n"); + printk(KERN_ERR "sym53c416: usage: sym53c416=[,]\n"); + return; + } + for(i = 0; i < host_index && i >= 0; i++) + if(hosts[i].base == ints[1]) + i = -2; + if(i >= 0) + { + hosts[host_index].base = ints[1]; + hosts[host_index].irq = (ints[0] == 2)? ints[2] : 0; + host_index++; + } +} + +static int sym53c416_test(int base) +{ + outb(RESET_CHIP, base + COMMAND_REG); + outb(NOOP, base + COMMAND_REG); + if(inb(base + COMMAND_REG) != NOOP) + return 0; + if(!inb(base + TC_HIGH) || inb(base + TC_HIGH) == 0xFF) + return 0; + if((inb(base + PIO_INT_REG) & (FULL | EMPTY | CE | OUE | FIE | EIE)) != EMPTY) + return 0; + return 1; +} + + +static struct isapnp_device_id id_table[] __devinitdata = { + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4161), 0 }, + { ISAPNP_ANY_ID, ISAPNP_ANY_ID, + ISAPNP_VENDOR('S','L','I'), ISAPNP_FUNCTION(0x4163), 0 }, + { ISAPNP_DEVICE_SINGLE_END } +}; + +MODULE_DEVICE_TABLE(isapnp, id_table); + +static void sym53c416_probe(void) +{ + int *base = probeaddrs; + int ints[2]; + + ints[0] = 1; + for(; *base; base++) { + if (request_region(*base, IO_RANGE, ID)) { + if (sym53c416_test(*base)) { + ints[1] = *base; + sym53c416_setup(NULL, ints); + } + release_region(*base, IO_RANGE); + } + } +} + +int __init sym53c416_detect(Scsi_Host_Template *tpnt) +{ + unsigned long flags; + struct Scsi_Host * shpnt = NULL; + int i; + int count; + struct pnp_dev *idev = NULL; + +#ifdef MODULE + int ints[3]; + + ints[0] = 2; + if(sym53c416_base) + { + ints[1] = sym53c416_base[0]; + ints[2] = sym53c416_base[1]; + sym53c416_setup(NULL, ints); + } + if(sym53c416_base_1) + { + ints[1] = sym53c416_base_1[0]; + ints[2] = sym53c416_base_1[1]; + sym53c416_setup(NULL, ints); + } + if(sym53c416_base_2) + { + ints[1] = sym53c416_base_2[0]; + ints[2] = sym53c416_base_2[1]; + sym53c416_setup(NULL, ints); + } + if(sym53c416_base_3) + { + ints[1] = sym53c416_base_3[0]; + ints[2] = sym53c416_base_3[1]; + sym53c416_setup(NULL, ints); + } +#endif + printk(KERN_INFO "sym53c416.c: %s\n", VERSION_STRING); + + for (i=0; id_table[i].vendor != 0; i++) { + while((idev=pnp_find_dev(NULL, id_table[i].vendor, + id_table[i].function, idev))!=NULL) + { + int i[3]; + + if(pnp_device_attach(idev)<0) + { + printk(KERN_WARNING "sym53c416: unable to attach PnP device.\n"); + continue; + } + if(pnp_activate_dev(idev) < 0) + { + printk(KERN_WARNING "sym53c416: unable to activate PnP device.\n"); + pnp_device_detach(idev); + continue; + + } + + i[0] = 2; + i[1] = pnp_port_start(idev, 0); + i[2] = pnp_irq(idev, 0); + + printk(KERN_INFO "sym53c416: ISAPnP card found and configured at 0x%X, IRQ %d.\n", + i[1], i[2]); + sym53c416_setup(NULL, i); + } + } + sym53c416_probe(); + + /* Now we register and set up each host adapter found... */ + for(count = 0, i = 0; i < host_index; i++) { + if (!request_region(hosts[i].base, IO_RANGE, ID)) + continue; + if (!sym53c416_test(hosts[i].base)) { + printk(KERN_WARNING "No sym53c416 found at address 0x%03x\n", hosts[i].base); + goto fail_release_region; + } + + /* We don't have an irq yet, so we should probe for one */ + if (!hosts[i].irq) + hosts[i].irq = sym53c416_probeirq(hosts[i].base, hosts[i].scsi_id); + if (!hosts[i].irq) + goto fail_release_region; + + shpnt = scsi_register(tpnt, 0); + if (!shpnt) + goto fail_release_region; + /* Request for specified IRQ */ + if (request_irq(hosts[i].irq, sym53c416_intr_handle, 0, ID, shpnt)) + goto fail_free_host; + + spin_lock_irqsave(&sym53c416_lock, flags); + shpnt->unique_id = hosts[i].base; + shpnt->io_port = hosts[i].base; + shpnt->n_io_port = IO_RANGE; + shpnt->irq = hosts[i].irq; + shpnt->this_id = hosts[i].scsi_id; + sym53c416_init(hosts[i].base, hosts[i].scsi_id); + count++; + spin_unlock_irqrestore(&sym53c416_lock, flags); + continue; + + fail_free_host: + scsi_unregister(shpnt); + fail_release_region: + release_region(hosts[i].base, IO_RANGE); + } + return count; +} + +const char *sym53c416_info(struct Scsi_Host *SChost) +{ + int i; + int base = SChost->io_port; + int irq = SChost->irq; + int scsi_id = 0; + int rev = inb(base + TC_HIGH); + + for(i = 0; i < host_index; i++) + if(hosts[i].base == base) + scsi_id = hosts[i].scsi_id; + sprintf(info, "Symbios Logic 53c416 (rev. %d) at 0x%03x, irq %d, SCSI-ID %d, %s pio", rev, base, irq, scsi_id, (fastpio)? "fast" : "slow"); + return info; +} + +int sym53c416_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) +{ + int base; + unsigned long flags = 0; + int i; + + /* Store base register as we can have more than one controller in the system */ + base = SCpnt->device->host->io_port; + current_command = SCpnt; /* set current command */ + current_command->scsi_done = done; /* set ptr to done function */ + current_command->SCp.phase = command_ph; /* currect phase is the command phase */ + current_command->SCp.Status = 0; + current_command->SCp.Message = 0; + + spin_lock_irqsave(&sym53c416_lock, flags); + outb(SCpnt->device->id, base + DEST_BUS_ID); /* Set scsi id target */ + outb(FLUSH_FIFO, base + COMMAND_REG); /* Flush SCSI and PIO FIFO's */ + /* Write SCSI command into the SCSI fifo */ + for(i = 0; i < SCpnt->cmd_len; i++) + outb(SCpnt->cmnd[i], base + SCSI_FIFO); + /* Start selection sequence */ + outb(SEL_WITHOUT_ATN_SEQ, base + COMMAND_REG); + /* Now an interrupt will be generated which we will catch in out interrupt routine */ + spin_unlock_irqrestore(&sym53c416_lock, flags); + return 0; +} + +static int sym53c416_abort(Scsi_Cmnd *SCpnt) +{ + return FAILED; +} + +static int sym53c416_bus_reset(Scsi_Cmnd *SCpnt) +{ + return FAILED; +} + +static int sym53c416_device_reset(Scsi_Cmnd *SCpnt) +{ + return FAILED; +} + +static int sym53c416_host_reset(Scsi_Cmnd *SCpnt) +{ + int base; + int scsi_id = -1; + int i; + + /* printk("sym53c416_reset\n"); */ + base = SCpnt->device->host->io_port; + /* search scsi_id - fixme, we shouldnt need to iterate for this! */ + for(i = 0; i < host_index && scsi_id != -1; i++) + if(hosts[i].base == base) + scsi_id = hosts[i].scsi_id; + outb(RESET_CHIP, base + COMMAND_REG); + outb(NOOP | PIO_MODE, base + COMMAND_REG); + outb(RESET_SCSI_BUS, base + COMMAND_REG); + sym53c416_init(base, scsi_id); + return SUCCESS; +} + +static int sym53c416_release(struct Scsi_Host *shost) +{ + if (shost->irq) + free_irq(shost->irq, shost); + if (shost->io_port && shost->n_io_port) + release_region(shost->io_port, shost->n_io_port); + return 0; +} + +static int sym53c416_bios_param(struct scsi_device *sdev, + struct block_device *dev, + sector_t capacity, int *ip) +{ + int size; + + size = capacity; + ip[0] = 64; /* heads */ + ip[1] = 32; /* sectors */ + if((ip[2] = size >> 11) > 1024) /* cylinders, test for big disk */ + { + ip[0] = 255; /* heads */ + ip[1] = 63; /* sectors */ + ip[2] = size / (255 * 63); /* cylinders */ + } + return 0; +} + +/* Loadable module support */ +#ifdef MODULE + +MODULE_AUTHOR("Lieven Willems"); +MODULE_LICENSE("GPL"); + +module_param_array(sym53c416, uint, NULL, 0); +module_param_array(sym53c416_1, uint, NULL, 0); +module_param_array(sym53c416_2, uint, NULL, 0); +module_param_array(sym53c416_3, uint, NULL, 0); + +#endif + +static Scsi_Host_Template driver_template = { + .proc_name = "sym53c416", + .name = "Symbios Logic 53c416", + .detect = sym53c416_detect, + .info = sym53c416_info, + .queuecommand = sym53c416_queuecommand, + .eh_abort_handler = sym53c416_abort, + .eh_host_reset_handler =sym53c416_host_reset, + .eh_bus_reset_handler = sym53c416_bus_reset, + .eh_device_reset_handler =sym53c416_device_reset, + .release = sym53c416_release, + .bios_param = sym53c416_bios_param, + .can_queue = 1, + .this_id = SYM53C416_SCSI_ID, + .sg_tablesize = 32, + .cmd_per_lun = 1, + .unchecked_isa_dma = 1, + .use_clustering = ENABLE_CLUSTERING, +}; +#include "scsi_module.c" -- cgit v1.2.3