From 15052c9e85bf0cdadcb69eb89623bf12bad8b4f8 Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:33:17 +0530
Subject: [SCSI] mpt2sas: Introduced check for enclosure_handle to avoid crash

Kernel panic is seen because of enclosure_handle received from FW is zero.
Check is introduced before calling mpt2sas_config_get_enclosure_pg0.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 2a01a5f2a84..b1326bf78c9 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3663,12 +3663,11 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
 	sas_device->hidden_raid_component = is_pd;
 
 	/* get enclosure_logical_id */
-	if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0,
-	   MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
-	   sas_device->enclosure_handle))) {
+	if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
+	   ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
+	   sas_device->enclosure_handle)))
 		sas_device->enclosure_logical_id =
 		    le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
-	}
 
 	/* get device name */
 	sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
-- 
cgit v1.2.3


From 20f5895d55d9281830bfb7819c5c5b70b05297a6 Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:34:26 +0530
Subject: [SCSI] mpt2sas: Expander fix oops saying "Already part of another
 port"

Kernel panic is seen because driver did not tear down the port which should
be dnoe using mpt2sas_transport_port_remove(). without this fix When expander
is added back we would oops inside sas_port_add_phy.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index b1326bf78c9..918445e1e65 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3426,7 +3426,7 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	__le64 sas_address;
 	int i;
 	unsigned long flags;
-	struct _sas_port *mpt2sas_port;
+	struct _sas_port *mpt2sas_port = NULL;
 	int rc = 0;
 
 	if (!handle)
@@ -3518,12 +3518,20 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 		    &expander_pg1, i, handle))) {
 			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
 			    ioc->name, __FILE__, __LINE__, __func__);
-			continue;
+			rc = -1;
+			goto out_fail;
 		}
 		sas_expander->phy[i].handle = handle;
 		sas_expander->phy[i].phy_id = i;
-		mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i],
-		    expander_pg1, sas_expander->parent_dev);
+
+		if ((mpt2sas_transport_add_expander_phy(ioc,
+		    &sas_expander->phy[i], expander_pg1,
+		    sas_expander->parent_dev))) {
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			rc = -1;
+			goto out_fail;
+		}
 	}
 
 	if (sas_expander->enclosure_handle) {
@@ -3540,8 +3548,9 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 
  out_fail:
 
-	if (sas_expander)
-		kfree(sas_expander->phy);
+	if (mpt2sas_port)
+		mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
+		    sas_expander->parent_handle);
 	kfree(sas_expander);
 	return rc;
 }
-- 
cgit v1.2.3


From 62727a7ba43c0abf2673e3877079c136a9721792 Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:35:18 +0530
Subject: [SCSI] mpt2sas: Raid 10 Value is showing as Raid 1E in
 /va/log/messages

When a volume is activated, the driver will recieve a pair of ir config change
events to remove the foreign volume, then add the native.
In the process of the removal event, the hidden raid componet is removed from
the parent.When the disks is added back, the adding of the port fails becuase
there is no instance of the device in its parent.
To fix this issue, the driver needs to call mpt2sas_transport_update_links()
prior to calling _scsih_add_device. In addition, we added sanity checks on
volume add and removal to ignore events for foreign volumes.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 90 +++++++++++++++++++++++++-----------
 1 file changed, 64 insertions(+), 26 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 918445e1e65..22a95421e36 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -4258,12 +4258,6 @@ _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
 	u16 handle = le16_to_cpu(element->VolDevHandle);
 	int rc;
 
-#if 0 /* RAID_HACKS */
-	if (le32_to_cpu(event_data->Flags) &
-	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
-		return;
-#endif
-
 	mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
 	if (!wwid) {
 		printk(MPT2SAS_ERR_FMT
@@ -4318,12 +4312,6 @@ _scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc,
 	unsigned long flags;
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 
-#if 0 /* RAID_HACKS */
-	if (le32_to_cpu(event_data->Flags) &
-	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
-		return;
-#endif
-
 	spin_lock_irqsave(&ioc->raid_device_lock, flags);
 	raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
 	spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
@@ -4436,14 +4424,38 @@ _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
 	struct _sas_device *sas_device;
 	unsigned long flags;
 	u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
 
 	spin_lock_irqsave(&ioc->sas_device_lock, flags);
 	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	if (sas_device)
+	if (sas_device) {
 		sas_device->hidden_raid_component = 1;
-	else
-		_scsih_add_device(ioc, handle, 0, 1);
+		return;
+	}
+
+	if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+	    MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		return;
+	}
+
+	_scsih_link_change(ioc,
+	    le16_to_cpu(sas_device_pg0.ParentDevHandle),
+	    handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+	_scsih_add_device(ioc, handle, 0, 1);
 }
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
@@ -4543,12 +4555,15 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 {
 	Mpi2EventIrConfigElement_t *element;
 	int i;
+	u8 foreign_config;
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
 		_scsih_sas_ir_config_change_event_debug(ioc, event_data);
 
 #endif
+	foreign_config = (le32_to_cpu(event_data->Flags) &
+	    MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
 
 	element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
 	for (i = 0; i < event_data->NumElements; i++, element++) {
@@ -4556,11 +4571,13 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 		switch (element->ReasonCode) {
 		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
 		case MPI2_EVENT_IR_CHANGE_RC_ADDED:
-			_scsih_sas_volume_add(ioc, element);
+			if (!foreign_config)
+				_scsih_sas_volume_add(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
 		case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
-			_scsih_sas_volume_delete(ioc, element);
+			if (!foreign_config)
+				_scsih_sas_volume_delete(ioc, element);
 			break;
 		case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
 			_scsih_sas_pd_hide(ioc, element);
@@ -4679,6 +4696,9 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	u32 state;
 	struct _sas_device *sas_device;
 	unsigned long flags;
+	Mpi2ConfigReply_t mpi_reply;
+	Mpi2SasDevicePage0_t sas_device_pg0;
+	u32 ioc_status;
 
 	if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
 		return;
@@ -4695,22 +4715,40 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 
 	switch (state) {
-#if 0
-	case MPI2_RAID_PD_STATE_OFFLINE:
-		if (sas_device)
-			_scsih_remove_device(ioc, handle);
-		break;
-#endif
 	case MPI2_RAID_PD_STATE_ONLINE:
 	case MPI2_RAID_PD_STATE_DEGRADED:
 	case MPI2_RAID_PD_STATE_REBUILDING:
 	case MPI2_RAID_PD_STATE_OPTIMAL:
-		if (sas_device)
+		if (sas_device) {
 			sas_device->hidden_raid_component = 1;
-		else
-			_scsih_add_device(ioc, handle, 0, 1);
+			return;
+		}
+
+		if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
+		    &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
+		    handle))) {
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+			printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+			    ioc->name, __FILE__, __LINE__, __func__);
+			return;
+		}
+
+		_scsih_link_change(ioc,
+		    le16_to_cpu(sas_device_pg0.ParentDevHandle),
+		    handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+
+		_scsih_add_device(ioc, handle, 0, 1);
+
 		break;
 
+	case MPI2_RAID_PD_STATE_OFFLINE:
 	case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
 	case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
 	case MPI2_RAID_PD_STATE_HOT_SPARE:
-- 
cgit v1.2.3


From be9e8cd75ce8d94ae4aab721fdcc337fa78a9090 Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:36:43 +0530
Subject: [SCSI] mpt2sas: Excessive log info causes sas iounit page time out

Inhibit 0x3117 loginfos - during cable pull, there are too many printks going
to the syslog, this is have impact on how fast the interrupt routine can handle
keeping up with command completions; this was the root cause to the config
pages timeouts.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c  | 4 ++++
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index f3da592f7bc..ed9965e4b96 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -440,6 +440,10 @@ _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
 	if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
 		return;
 
+	/* each nexus loss loginfo */
+	if (log_info == 0x31170000)
+		return;
+
 	/* eat the loginfos associated with task aborts */
 	if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
 	    0x31140000 || log_info == 0x31130000))
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 22a95421e36..25c8d8294af 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2767,6 +2767,10 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
 	char *desc_ioc_state = NULL;
 	char *desc_scsi_status = NULL;
 	char *desc_scsi_state = ioc->tmp_string;
+	u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
+
+	if (log_info == 0x31170000)
+		return;
 
 	switch (ioc_status) {
 	case MPI2_IOCSTATUS_SUCCESS:
-- 
cgit v1.2.3


From 6bd4e1e4d6023f4da069fd68729c502cc4e6dfd0 Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:37:14 +0530
Subject: [SCSI] mpt2sas: fix infinite loop inside config request

This restriction is introduced just to avoid loop of
config_request. Retry must be limited so we have restricted
config request to maximum 2 times.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_config.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 58cfb97846f..1c6658c6023 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -247,6 +247,12 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	retry_count = 0;
 
  retry_config:
+	if (retry_count) {
+		if (retry_count > 2) /* attempt only 2 retries */
+			return -EFAULT;
+		printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
+		    ioc->name, __func__, retry_count);
+	}
 	wait_state_count = 0;
 	ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
 	while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
-- 
cgit v1.2.3


From e4750c989f732555fca86dd73d488c79972362db Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:37:59 +0530
Subject: [SCSI] mpt2sas: fix crash due to Watchdog is active while OS in
 standby mode

Fix oops ocurring at hibernation time.  This oops was due to the firmware fault
watchdog timer still running after we freed resources. To fix the issue we need
to terminate the watchdog timer at hibernation time.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c  | 88 ++++++++++++++++++++++++------------
 drivers/scsi/mpt2sas/mpt2sas_base.h  |  2 +
 drivers/scsi/mpt2sas/mpt2sas_scsih.c |  2 +
 3 files changed, 64 insertions(+), 28 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index ed9965e4b96..c29c4f9851b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -119,6 +119,64 @@ _base_fault_reset_work(struct work_struct *work)
 	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 }
 
+/**
+ * mpt2sas_base_start_watchdog - start the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+
+	if (ioc->fault_reset_work_q)
+		return;
+
+	/* initialize fault polling */
+	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
+	snprintf(ioc->fault_reset_work_q_name,
+	    sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
+	ioc->fault_reset_work_q =
+		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
+	if (!ioc->fault_reset_work_q) {
+		printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
+		    ioc->name, __func__, __LINE__);
+			return;
+	}
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	if (ioc->fault_reset_work_q)
+		queue_delayed_work(ioc->fault_reset_work_q,
+		    &ioc->fault_reset_work,
+		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+}
+
+/**
+ * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
+ * @ioc: pointer to scsi command object
+ * Context: sleep.
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
+{
+	unsigned long	 flags;
+	struct workqueue_struct *wq;
+
+	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
+	wq = ioc->fault_reset_work_q;
+	ioc->fault_reset_work_q = NULL;
+	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	if (wq) {
+		if (!cancel_delayed_work(&ioc->fault_reset_work))
+			flush_workqueue(wq);
+		destroy_workqueue(wq);
+	}
+}
+
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
  * _base_sas_ioc_info - verbose translation of the ioc status
@@ -3209,7 +3267,6 @@ int
 mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 {
 	int r, i;
-	unsigned long	 flags;
 
 	dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 	    __func__));
@@ -3292,23 +3349,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	if (r)
 		goto out_free_resources;
 
-	/* initialize fault polling */
-	INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
-	snprintf(ioc->fault_reset_work_q_name,
-	    sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
-	ioc->fault_reset_work_q =
-		create_singlethread_workqueue(ioc->fault_reset_work_q_name);
-	if (!ioc->fault_reset_work_q) {
-		printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
-		    ioc->name, __func__, __LINE__);
-			goto out_free_resources;
-	}
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (ioc->fault_reset_work_q)
-		queue_delayed_work(ioc->fault_reset_work_q,
-		    &ioc->fault_reset_work,
-		    msecs_to_jiffies(FAULT_POLLING_INTERVAL));
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	mpt2sas_base_start_watchdog(ioc);
 	return 0;
 
  out_free_resources:
@@ -3341,20 +3382,11 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 void
 mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
 {
-	unsigned long	 flags;
-	struct workqueue_struct *wq;
 
 	dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
 	    __func__));
 
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	wq = ioc->fault_reset_work_q;
-	ioc->fault_reset_work_q = NULL;
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
-	if (!cancel_delayed_work(&ioc->fault_reset_work))
-		flush_workqueue(wq);
-	destroy_workqueue(wq);
-
+	mpt2sas_base_stop_watchdog(ioc);
 	mpt2sas_base_free_resources(ioc);
 	_base_release_memory_pools(ioc);
 	kfree(ioc->pfacts);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 286c185fa9e..a29935726e7 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -673,6 +673,8 @@ typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
 
 /* base shared API */
 extern struct list_head mpt2sas_ioc_list;
+void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
+void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
 
 int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
 void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 25c8d8294af..2e9a4445596 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -5824,6 +5824,7 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 	u32 device_state;
 
+	mpt2sas_base_stop_watchdog(ioc);
 	flush_scheduled_work();
 	scsi_block_requests(shost);
 	device_state = pci_choose_state(pdev, state);
@@ -5866,6 +5867,7 @@ _scsih_resume(struct pci_dev *pdev)
 
 	mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
 	scsi_unblock_requests(shost);
+	mpt2sas_base_start_watchdog(ioc);
 	return 0;
 }
 #endif /* CONFIG_PM */
-- 
cgit v1.2.3


From fcfe6392d18283df3c561b5ef59c330d485ff8ca Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:38:48 +0530
Subject: [SCSI] mpt2sas: fix oops because drv data points to NULL on resume
 from hibernate

Fix another ocurring when the system resumes.  This oops was due to driver
setting the pci drvdata to NULL on the prior hibernation.  Becuase it was
set to NULL, upon resmume we assume the pci drvdata is non-zero, and we oops.
To fix the ooops, we don't set pci drvdata to NULL at hibernation time.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index c29c4f9851b..35a13867495 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1171,7 +1171,6 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
 		}
 	}
 
-	pci_set_drvdata(pdev, ioc->shost);
 	_base_mask_interrupts(ioc);
 	r = _base_enable_msix(ioc);
 	if (r)
@@ -1194,7 +1193,6 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
 	ioc->pci_irq = -1;
 	pci_release_selected_regions(ioc->pdev, ioc->bars);
 	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
 	return r;
 }
 
@@ -3253,7 +3251,6 @@ mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
 	ioc->chip_phys = 0;
 	pci_release_selected_regions(ioc->pdev, ioc->bars);
 	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
 	return;
 }
 
@@ -3275,6 +3272,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	if (r)
 		return r;
 
+	pci_set_drvdata(ioc->pdev, ioc->shost);
 	r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
 	if (r)
 		goto out_free_resources;
@@ -3357,6 +3355,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	ioc->remove_host = 1;
 	mpt2sas_base_free_resources(ioc);
 	_base_release_memory_pools(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
 	kfree(ioc->tm_cmds.reply);
 	kfree(ioc->transport_cmds.reply);
 	kfree(ioc->config_cmds.reply);
@@ -3389,6 +3388,7 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
 	mpt2sas_base_stop_watchdog(ioc);
 	mpt2sas_base_free_resources(ioc);
 	_base_release_memory_pools(ioc);
+	pci_set_drvdata(ioc->pdev, NULL);
 	kfree(ioc->pfacts);
 	kfree(ioc->ctl_cmds.reply);
 	kfree(ioc->base_cmds.reply);
-- 
cgit v1.2.3


From f9b14c9183b250cf128c7d2341e6b9bdbbcd8f35 Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 7 Aug 2009 19:39:59 +0530
Subject: [SCSI] mpt2sas: Bump driver version 01.100.04.00

Bump version to 01.100.04.00

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_base.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index a29935726e7..acdcff150a3 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,10 +69,10 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"01.100.03.00"
+#define MPT2SAS_DRIVER_VERSION		"01.100.04.00"
 #define MPT2SAS_MAJOR_VERSION		01
 #define MPT2SAS_MINOR_VERSION		100
-#define MPT2SAS_BUILD_VERSION		03
+#define MPT2SAS_BUILD_VERSION		04
 #define MPT2SAS_RELEASE_VERSION		00
 
 /*
-- 
cgit v1.2.3


From 388ce4beb7135722c584b0af18f215e3ec657adf Mon Sep 17 00:00:00 2001
From: "Kashyap, Desai" <kashyap.desai@lsi.com>
Date: Fri, 14 Aug 2009 15:01:35 +0530
Subject: [SCSI] mpt2sas: fix config request and diag reset deadlock

Moving the setting and clearing of the mutex's to
_config_request. There was a mutex deadlock when diag reset is called from
inside _config_request, so diag reset was moved to outside the mutexs.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/mpt2sas/mpt2sas_config.c | 85 +++++++++--------------------------
 1 file changed, 20 insertions(+), 65 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 1c6658c6023..6ddee161beb 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -236,12 +236,14 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	Mpi2ConfigRequest_t *config_request;
 	int r;
 	u8 retry_count;
-	u8 issue_reset;
+	u8 issue_host_reset = 0;
 	u16 wait_state_count;
 
+	mutex_lock(&ioc->config_cmds.mutex);
 	if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
 		printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
 		    ioc->name, __func__);
+		mutex_unlock(&ioc->config_cmds.mutex);
 		return -EAGAIN;
 	}
 	retry_count = 0;
@@ -260,8 +262,8 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 			printk(MPT2SAS_ERR_FMT
 			    "%s: failed due to ioc not operational\n",
 			    ioc->name, __func__);
-			ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-			return -EFAULT;
+			r = -EFAULT;
+			goto out;
 		}
 		ssleep(1);
 		ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
@@ -277,8 +279,8 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	if (!smid) {
 		printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
 		    ioc->name, __func__);
-		ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-		return -EAGAIN;
+		r = -EAGAIN;
+		goto out;
 	}
 
 	r = 0;
@@ -298,9 +300,15 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 		    ioc->name, __func__);
 		_debug_dump_mf(mpi_request,
 		    sizeof(Mpi2ConfigRequest_t)/4);
-		if (!(ioc->config_cmds.status & MPT2_CMD_RESET))
-			issue_reset = 1;
-		goto issue_host_reset;
+		retry_count++;
+		if (ioc->config_cmds.smid == smid)
+			mpt2sas_base_free_smid(ioc, smid);
+		if ((ioc->shost_recovery) ||
+		    (ioc->config_cmds.status & MPT2_CMD_RESET))
+			goto retry_config;
+		issue_host_reset = 1;
+		r = -EFAULT;
+		goto out;
 	}
 	if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
 		memcpy(mpi_reply, ioc->config_cmds.reply,
@@ -308,21 +316,13 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
 	if (retry_count)
 		printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n",
 		    ioc->name, __func__);
+out:
 	ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-	return r;
-
- issue_host_reset:
-	if (issue_reset)
+	mutex_unlock(&ioc->config_cmds.mutex);
+	if (issue_host_reset)
 		mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 		    FORCE_BIG_HAMMER);
-	ioc->config_cmds.status = MPT2_CMD_NOT_USED;
-	if (!retry_count) {
-		printk(MPT2SAS_INFO_FMT "%s: attempting retry\n",
-		    ioc->name, __func__);
-		retry_count++;
-		goto retry_config;
-	}
-	return -EFAULT;
+	return r;
 }
 
 /**
@@ -381,7 +381,6 @@ mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -423,7 +422,6 @@ mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -444,7 +442,6 @@ mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2BiosPage2_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -486,7 +483,6 @@ mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -507,7 +503,6 @@ mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2BiosPage3_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -549,7 +544,6 @@ mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -570,7 +564,6 @@ mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -612,7 +605,6 @@ mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -633,7 +625,6 @@ mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -675,7 +666,6 @@ mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -696,7 +686,6 @@ mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
 	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
@@ -738,7 +727,6 @@ mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -759,7 +747,6 @@ mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2IOCPage8_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -801,7 +788,6 @@ mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -824,7 +810,6 @@ mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -869,7 +854,6 @@ mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -892,7 +876,6 @@ mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -937,7 +920,6 @@ mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -959,7 +941,6 @@ mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys)
 	Mpi2ConfigReply_t mpi_reply;
 	Mpi2SasIOUnitPage0_t config_page;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
 	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
@@ -1008,7 +989,6 @@ mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys)
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1032,8 +1012,6 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	Mpi2ConfigRequest_t mpi_request;
 	int r;
 	struct config_request mem;
-
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sz);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1076,7 +1054,6 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1101,7 +1078,6 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sz);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1144,7 +1120,6 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1167,7 +1142,6 @@ mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1212,7 +1186,6 @@ mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1236,7 +1209,6 @@ mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1283,7 +1255,6 @@ mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1306,7 +1277,6 @@ mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1351,7 +1321,6 @@ mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1373,7 +1342,6 @@ mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1419,7 +1387,6 @@ mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1441,7 +1408,6 @@ mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1487,7 +1453,6 @@ mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1511,7 +1476,6 @@ mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t));
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1554,7 +1518,6 @@ mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1578,7 +1541,6 @@ mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 	struct config_request mem;
 	u16 ioc_status;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	*num_pds = 0;
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1626,7 +1588,6 @@ mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1651,7 +1612,6 @@ mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc,
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	memset(config_page, 0, sz);
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1693,7 +1653,6 @@ mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1717,7 +1676,6 @@ mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 	int r;
 	struct config_request mem;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1760,7 +1718,6 @@ mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
@@ -1784,7 +1741,6 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
 	struct config_request mem;
 	u16 ioc_status;
 
-	mutex_lock(&ioc->config_cmds.mutex);
 	*volume_handle = 0;
 	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
 	mpi_request.Function = MPI2_FUNCTION_CONFIG;
@@ -1848,7 +1804,6 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
 		_config_free_config_dma_memory(ioc, &mem);
 
  out:
-	mutex_unlock(&ioc->config_cmds.mutex);
 	return r;
 }
 
-- 
cgit v1.2.3