From 52e15f0eae193a8e4ca31c1520179b8d65c79811 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 2 Jan 2009 13:40:14 +0000 Subject: Blackfin Serial Driver: updates kgdb over Blackfin serial driver with kgdb framework Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 187 ++++++++++++++++++++++------------------------ 1 file changed, 89 insertions(+), 98 deletions(-) (limited to 'drivers/serial/bfin_5xx.c') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 569f0e2476c..d63fad7363b 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -22,7 +22,8 @@ #include #include -#ifdef CONFIG_KGDB_UART +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) #include #include #endif @@ -45,6 +46,16 @@ static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource); +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + +# ifndef CONFIG_SERIAL_BFIN_PIO +# error KGDB only support UART in PIO mode. +# endif + +static int kgdboc_port_line; +static int kgdboc_break_enabled; +#endif /* * Setup for console. Argument comes from the menuconfig */ @@ -110,9 +121,7 @@ static void bfin_serial_start_tx(struct uart_port *port) static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) -#endif + UART_CLEAR_IER(uart, ERBFI); } @@ -123,49 +132,6 @@ static void bfin_serial_enable_ms(struct uart_port *port) { } -#ifdef CONFIG_KGDB_UART -static int kgdb_entry_state; - -void kgdb_put_debug_char(int chr) -{ - struct bfin_serial_port *uart; - - if (CONFIG_KGDB_UART_PORT < 0 - || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) - uart = &bfin_serial_ports[0]; - else - uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - - while (!(UART_GET_LSR(uart) & THRE)) { - SSYNC(); - } - - UART_CLEAR_DLAB(uart); - UART_PUT_CHAR(uart, (unsigned char)chr); - SSYNC(); -} - -int kgdb_get_debug_char(void) -{ - struct bfin_serial_port *uart; - unsigned char chr; - - if (CONFIG_KGDB_UART_PORT < 0 - || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS) - uart = &bfin_serial_ports[0]; - else - uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - - while(!(UART_GET_LSR(uart) & DR)) { - SSYNC(); - } - UART_CLEAR_DLAB(uart); - chr = UART_GET_CHAR(uart); - SSYNC(); - - return chr; -} -#endif #if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) # define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) @@ -178,7 +144,7 @@ int kgdb_get_debug_char(void) #ifdef CONFIG_SERIAL_BFIN_PIO static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { - struct tty_struct *tty = uart->port.info->port.tty; + struct tty_struct *tty = NULL; unsigned int status, ch, flg; static struct timeval anomaly_start = { .tv_sec = 0 }; @@ -188,27 +154,18 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) ch = UART_GET_CHAR(uart); uart->port.icount.rx++; -#ifdef CONFIG_KGDB_UART - if (uart->port.line == CONFIG_KGDB_UART_PORT) { - struct pt_regs *regs = get_irq_regs(); - if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */ - kgdb_breakkey_pressed(regs); - return; - } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */ - kgdb_entry_state = 1; - } else if (kgdb_entry_state == 1 && ch == 'q') { - kgdb_entry_state = 0; - kgdb_breakkey_pressed(regs); +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdb_connected && kgdboc_port_line == uart->port.line) + if (ch == 0x3) {/* Ctrl + C */ + kgdb_breakpoint(); return; - } else if (ch == 0x3) {/* Ctrl + C */ - kgdb_entry_state = 0; - kgdb_breakkey_pressed(regs); - return; - } else { - kgdb_entry_state = 0; } - } + + if (!uart->port.info || !uart->port.info->tty) + return; #endif + tty = uart->port.info->tty; if (ANOMALY_05000363) { /* The BF533 (and BF561) family of processors have a nice anomaly @@ -630,16 +587,16 @@ static int bfin_serial_startup(struct uart_port *port) uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); #else +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) + kgdboc_break_enabled = 0; + else { +# endif if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart)) { -# ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) { -# endif printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); return -EBUSY; -# ifdef CONFIG_KGDB_UART - } -# endif } if (request_irq @@ -685,6 +642,10 @@ static int bfin_serial_startup(struct uart_port *port) } } # endif +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + } +# endif #endif UART_SET_IER(uart, ERBFI); return 0; @@ -715,9 +676,6 @@ static void bfin_serial_shutdown(struct uart_port *port) default: break; }; -#endif -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) #endif free_irq(uart->port.irq, uart); free_irq(uart->port.irq+1, uart); @@ -887,6 +845,51 @@ static void bfin_serial_set_ldisc(struct uart_port *port) } } +#ifdef CONFIG_CONSOLE_POLL +static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while (!(UART_GET_LSR(uart) & THRE)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + UART_PUT_CHAR(uart, (unsigned char)chr); +} + +static int bfin_serial_poll_get_char(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned char chr; + + while (!(UART_GET_LSR(uart) & DR)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + chr = UART_GET_CHAR(uart); + + return chr; +} +#endif + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) +static void bfin_kgdboc_port_shutdown(struct uart_port *port) +{ + if (kgdboc_break_enabled) { + kgdboc_break_enabled = 0; + bfin_serial_shutdown(port); + } +} + +static int bfin_kgdboc_port_startup(struct uart_port *port) +{ + kgdboc_port_line = port->line; + kgdboc_break_enabled = !bfin_serial_startup(port); + return 0; +} +#endif + static struct uart_ops bfin_serial_pops = { .tx_empty = bfin_serial_tx_empty, .set_mctrl = bfin_serial_set_mctrl, @@ -905,6 +908,15 @@ static struct uart_ops bfin_serial_pops = { .request_port = bfin_serial_request_port, .config_port = bfin_serial_config_port, .verify_port = bfin_serial_verify_port, +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + .kgdboc_port_startup = bfin_kgdboc_port_startup, + .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, +#endif +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = bfin_serial_poll_put_char, + .poll_get_char = bfin_serial_poll_get_char, +#endif }; static void __init bfin_serial_init_ports(void) @@ -1076,10 +1088,7 @@ static int __init bfin_serial_rs_console_init(void) { bfin_serial_init_ports(); register_console(&bfin_serial_console); -#ifdef CONFIG_KGDB_UART - kgdb_entry_state = 0; - init_kgdb_uart(); -#endif + return 0; } console_initcall(bfin_serial_rs_console_init); @@ -1235,10 +1244,6 @@ static struct platform_driver bfin_serial_driver = { static int __init bfin_serial_init(void) { int ret; -#ifdef CONFIG_KGDB_UART - struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT]; - struct ktermios t; -#endif pr_info("Serial: Blackfin serial driver\n"); @@ -1252,21 +1257,6 @@ static int __init bfin_serial_init(void) uart_unregister_driver(&bfin_serial_reg); } } -#ifdef CONFIG_KGDB_UART - if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) { - request_irq(uart->port.irq, bfin_serial_rx_int, - IRQF_DISABLED, "BFIN_UART_RX", uart); - pr_info("Request irq for kgdb uart port\n"); - UART_SET_IER(uart, ERBFI); - SSYNC(); - t.c_cflag = CS8|B57600; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = CONFIG_KGDB_UART_PORT; - bfin_serial_set_termios(&uart->port, &t, &t); - } -#endif return ret; } @@ -1276,6 +1266,7 @@ static void __exit bfin_serial_exit(void) uart_unregister_driver(&bfin_serial_reg); } + module_init(bfin_serial_init); module_exit(bfin_serial_exit); -- cgit v1.2.3 From 80d5c474b87da88eca8e1ab034e26daa9f688130 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Fri, 2 Jan 2009 13:40:22 +0000 Subject: Blackfin Serial Driver: fix bug - SIR driver stop receiving randomly Bug description: The IRDA receiver may can't receiving any more after processed some signals. To duplicate this issue is put three IRDA devices together, one blackfin, two none blackfin, they will detect each other. Let one none blackfin devices irdaping the blackfin devices, when it stopped print out ping information, it is the time that blackfin stoped receiving, the time is random. The related register bit is OK, the other devices is sending data continuously. But no interrupt come. Fixing: I tried Michael's suggestion that request the UARTx error interrupt, and reset the IRDA when found FE error. This method helps much, but it can't completely avoid stop. Reset the IRDA before every time sending the data is more safe. Signed-off-by: Graf Yang Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers/serial/bfin_5xx.c') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d63fad7363b..59a221f9ee9 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -73,6 +73,8 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart); static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); +static void bfin_serial_reset_irda(struct uart_port *port); + /* * interrupts are disabled on entry */ @@ -105,6 +107,14 @@ static void bfin_serial_stop_tx(struct uart_port *port) static void bfin_serial_start_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct tty_struct *tty = uart->port.info->port.tty; + + /* + * To avoid losting RX interrupt, we reset IR function + * before sending data. + */ + if (tty->termios->c_line == N_IRDA) + bfin_serial_reset_irda(port); #ifdef CONFIG_SERIAL_BFIN_DMA if (uart->tx_done) @@ -890,6 +900,20 @@ static int bfin_kgdboc_port_startup(struct uart_port *port) } #endif +static void bfin_serial_reset_irda(struct uart_port *port) +{ + int line = port->line; + unsigned short val; + + val = UART_GET_GCTL(&bfin_serial_ports[line]); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + SSYNC(); + val |= (IREN | RPOLC); + UART_PUT_GCTL(&bfin_serial_ports[line], val); + SSYNC(); +} + static struct uart_ops bfin_serial_pops = { .tx_empty = bfin_serial_tx_empty, .set_mctrl = bfin_serial_set_mctrl, -- cgit v1.2.3 From b6efa1eabbe8d23fd7dcad1eed8ce945f4adea83 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 2 Jan 2009 13:40:31 +0000 Subject: Blackfin Serial Driver: Clean serial console and early prink code. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) (limited to 'drivers/serial/bfin_5xx.c') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 59a221f9ee9..88449d36a3f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -986,7 +986,7 @@ static void __init bfin_serial_init_ports(void) } -#ifdef CONFIG_SERIAL_BFIN_CONSOLE +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) /* * If the port was already initialised (eg, by a boot loader), * try to determine the current setup. @@ -1030,24 +1030,20 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, } pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); } -#endif -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) static struct uart_driver bfin_serial_reg; static int __init bfin_serial_console_setup(struct console *co, char *options) { struct bfin_serial_port *uart; -# ifdef CONFIG_SERIAL_BFIN_CONSOLE int baud = 57600; int bits = 8; int parity = 'n'; -# ifdef CONFIG_SERIAL_BFIN_CTSRTS +# ifdef CONFIG_SERIAL_BFIN_CTSRTS int flow = 'r'; -# else +# else int flow = 'n'; -# endif # endif /* @@ -1059,16 +1055,12 @@ bfin_serial_console_setup(struct console *co, char *options) co->index = 0; uart = &bfin_serial_ports[co->index]; -# ifdef CONFIG_SERIAL_BFIN_CONSOLE if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else bfin_serial_console_get_options(uart, &baud, &parity, &bits); return uart_set_options(&uart->port, co, baud, parity, bits, flow); -# else - return 0; -# endif } #endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || defined (CONFIG_EARLY_PRINTK) */ @@ -1177,7 +1169,7 @@ struct console __init *bfin_earlyserial_init(unsigned int port, return &bfin_early_serial_console; } -#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ +#endif /* CONFIG_EARLY_PRINTK */ static struct uart_driver bfin_serial_reg = { .owner = THIS_MODULE, -- cgit v1.2.3 From 68a784cb1add52543644a879ef601f3b52d18623 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 2 Jan 2009 13:40:38 +0000 Subject: Blackfin Serial Driver: Fix bug - BF527-EZKIT unable to receive large files over UART in DMA mode Add spin_lock_irqsave() when receive and transfer data. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/serial/bfin_5xx.c') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 88449d36a3f..1c85039d021 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -81,7 +81,9 @@ static void bfin_serial_reset_irda(struct uart_port *port); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifdef CONFIG_SERIAL_BFIN_DMA struct circ_buf *xmit = &uart->port.info->xmit; +#endif while (!(UART_GET_LSR(uart) & TEMT)) cpu_relax(); @@ -412,7 +414,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { - int x_pos, pos; + int x_pos, pos, flags; + + spin_lock_irqsave(&uart->port.lock, flags); uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); @@ -430,6 +434,8 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } + spin_unlock_irqrestore(&uart->port.lock, flags); + mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); } @@ -464,10 +470,9 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); + bfin_serial_dma_rx_chars(uart); spin_unlock(&uart->port.lock); - mod_timer(&(uart->rx_dma_timer), jiffies); - return IRQ_HANDLED; } #endif -- cgit v1.2.3 From e482a2378f3d1aef7fa8942f8f163078f01bb456 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 2 Jan 2009 13:40:45 +0000 Subject: Blackfin Serial Driver: Remove BI status for known_good_char Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/serial/bfin_5xx.c') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 1c85039d021..318d69dce8e 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -219,6 +219,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) return; known_good_char: + status &= ~BI; anomaly_start.tv_sec = 0; } } -- cgit v1.2.3