From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/serial/mpc52xx_uart.c | 852 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 852 insertions(+) create mode 100644 drivers/serial/mpc52xx_uart.c (limited to 'drivers/serial/mpc52xx_uart.c') diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c new file mode 100644 index 00000000000..2a5cf174ca3 --- /dev/null +++ b/drivers/serial/mpc52xx_uart.c @@ -0,0 +1,852 @@ +/* + * drivers/serial/mpc52xx_uart.c + * + * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. + * + * FIXME According to the usermanual the status bits in the status register + * are only updated when the peripherals access the FIFO and not when the + * CPU access them. So since we use this bits to know when we stop writing + * and reading, they may not be updated in-time and a race condition may + * exists. But I haven't be able to prove this and I don't care. But if + * any problem arises, it might worth checking. The TX/RX FIFO Stats + * registers should be used in addition. + * Update: Actually, they seem updated ... At least the bits we use. + * + * + * Maintainer : Sylvain Munaut + * + * Some of the code has been inspired/copied from the 2.4 code written + * by Dale Farnsworth . + * + * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* Platform device Usage : + * + * Since PSCs can have multiple function, the correct driver for each one + * is selected by calling mpc52xx_match_psc_function(...). The function + * handled by this driver is "uart". + * + * The driver init all necessary registers to place the PSC in uart mode without + * DCD. However, the pin multiplexing aren't changed and should be set either + * by the bootloader or in the platform init code. + * + * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2, + * and so on). So the PSC1 is mapped to /dev/ttyS0, PSC2 to /dev/ttyS1 and so + * on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly for + * the console code : without this 1:1 mapping, at early boot time, when we are + * parsing the kernel args console=ttyS?, we wouldn't know wich PSC it will be + * mapped to. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + + + +#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ + + +static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; + /* Rem: - We use the read_status_mask as a shadow of + * psc->mpc52xx_psc_imr + * - It's important that is array is all zero on start as we + * use it to know if it's initialized or not ! If it's not sure + * it's cleared, then a memset(...,0,...) should be added to + * the console_init + */ + +#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) + + +/* Forward declaration of the interruption handling routine */ +static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id,struct pt_regs *regs); + + +/* Simple macro to test if a port is console or not. This one is taken + * for serial_core.c and maybe should be moved to serial_core.h ? */ +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) (0) +#endif + + +/* ======================================================================== */ +/* UART operations */ +/* ======================================================================== */ + +static unsigned int +mpc52xx_uart_tx_empty(struct uart_port *port) +{ + int status = in_be16(&PSC(port)->mpc52xx_psc_status); + return (status & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0; +} + +static void +mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* Not implemented */ +} + +static unsigned int +mpc52xx_uart_get_mctrl(struct uart_port *port) +{ + /* Not implemented */ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void +mpc52xx_uart_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + /* port->lock taken by caller */ + port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); +} + +static void +mpc52xx_uart_start_tx(struct uart_port *port, unsigned int tty_start) +{ + /* port->lock taken by caller */ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); +} + +static void +mpc52xx_uart_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + port->x_char = ch; + if (ch) { + /* Make sure tx interrupts are on */ + /* Truly necessary ??? They should be anyway */ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void +mpc52xx_uart_stop_rx(struct uart_port *port) +{ + /* port->lock taken by caller */ + port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); +} + +static void +mpc52xx_uart_enable_ms(struct uart_port *port) +{ + /* Not implemented */ +} + +static void +mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + if ( ctl == -1 ) + out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK); + else + out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int +mpc52xx_uart_startup(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + int ret; + + /* Request IRQ */ + ret = request_irq(port->irq, mpc52xx_uart_int, + SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port); + if (ret) + return ret; + + /* Reset/activate the port, clear and enable interrupts */ + out_8(&psc->command,MPC52xx_PSC_RST_RX); + out_8(&psc->command,MPC52xx_PSC_RST_TX); + + out_be32(&psc->sicr,0); /* UART mode DCD ignored */ + + out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */ + + out_8(&psc->rfcntl, 0x00); + out_be16(&psc->rfalarm, 0x1ff); + out_8(&psc->tfcntl, 0x07); + out_be16(&psc->tfalarm, 0x80); + + port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; + out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); + + out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); + + return 0; +} + +static void +mpc52xx_uart_shutdown(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* Shut down the port, interrupt and all */ + out_8(&psc->command,MPC52xx_PSC_RST_RX); + out_8(&psc->command,MPC52xx_PSC_RST_TX); + + port->read_status_mask = 0; + out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); + + /* Release interrupt */ + free_irq(port->irq, port); +} + +static void +mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new, + struct termios *old) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned long flags; + unsigned char mr1, mr2; + unsigned short ctr; + unsigned int j, baud, quot; + + /* Prepare what we're gonna write */ + mr1 = 0; + + switch (new->c_cflag & CSIZE) { + case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; + break; + case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; + break; + case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; + break; + case CS8: + default: mr1 |= MPC52xx_PSC_MODE_8_BITS; + } + + if (new->c_cflag & PARENB) { + mr1 |= (new->c_cflag & PARODD) ? + MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; + } else + mr1 |= MPC52xx_PSC_MODE_PARNONE; + + + mr2 = 0; + + if (new->c_cflag & CSTOPB) + mr2 |= MPC52xx_PSC_MODE_TWO_STOP; + else + mr2 |= ((new->c_cflag & CSIZE) == CS5) ? + MPC52xx_PSC_MODE_ONE_STOP_5_BITS : + MPC52xx_PSC_MODE_ONE_STOP; + + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + ctr = quot & 0xffff; + + /* Get the lock */ + spin_lock_irqsave(&port->lock, flags); + + /* Update the per-port timeout */ + uart_update_timeout(port, new->c_cflag, baud); + + /* Do our best to flush TX & RX, so we don't loose anything */ + /* But we don't wait indefinitly ! */ + j = 5000000; /* Maximum wait */ + /* FIXME Can't receive chars since set_termios might be called at early + * boot for the console, all stuff is not yet ready to receive at that + * time and that just makes the kernel oops */ + /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ + while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && + --j) + udelay(1); + + if (!j) + printk( KERN_ERR "mpc52xx_uart.c: " + "Unable to flush RX & TX fifos in-time in set_termios." + "Some chars may have been lost.\n" ); + + /* Reset the TX & RX */ + out_8(&psc->command,MPC52xx_PSC_RST_RX); + out_8(&psc->command,MPC52xx_PSC_RST_TX); + + /* Send new mode settings */ + out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&psc->mode,mr1); + out_8(&psc->mode,mr2); + out_8(&psc->ctur,ctr >> 8); + out_8(&psc->ctlr,ctr & 0xff); + + /* Reenable TX & RX */ + out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); + + /* We're all set, release the lock */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char * +mpc52xx_uart_type(struct uart_port *port) +{ + return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL; +} + +static void +mpc52xx_uart_release_port(struct uart_port *port) +{ + if (port->flags & UPF_IOREMAP) { /* remapped by us ? */ + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, MPC52xx_PSC_SIZE); +} + +static int +mpc52xx_uart_request_port(struct uart_port *port) +{ + if (port->flags & UPF_IOREMAP) /* Need to remap ? */ + port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE); + + if (!port->membase) + return -EINVAL; + + return request_mem_region(port->mapbase, MPC52xx_PSC_SIZE, + "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; +} + +static void +mpc52xx_uart_config_port(struct uart_port *port, int flags) +{ + if ( (flags & UART_CONFIG_TYPE) && + (mpc52xx_uart_request_port(port) == 0) ) + port->type = PORT_MPC52xx; +} + +static int +mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx ) + return -EINVAL; + + if ( (ser->irq != port->irq) || + (ser->io_type != SERIAL_IO_MEM) || + (ser->baud_base != port->uartclk) || + (ser->iomem_base != (void*)port->mapbase) || + (ser->hub6 != 0 ) ) + return -EINVAL; + + return 0; +} + + +static struct uart_ops mpc52xx_uart_ops = { + .tx_empty = mpc52xx_uart_tx_empty, + .set_mctrl = mpc52xx_uart_set_mctrl, + .get_mctrl = mpc52xx_uart_get_mctrl, + .stop_tx = mpc52xx_uart_stop_tx, + .start_tx = mpc52xx_uart_start_tx, + .send_xchar = mpc52xx_uart_send_xchar, + .stop_rx = mpc52xx_uart_stop_rx, + .enable_ms = mpc52xx_uart_enable_ms, + .break_ctl = mpc52xx_uart_break_ctl, + .startup = mpc52xx_uart_startup, + .shutdown = mpc52xx_uart_shutdown, + .set_termios = mpc52xx_uart_set_termios, +/* .pm = mpc52xx_uart_pm, Not supported yet */ +/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */ + .type = mpc52xx_uart_type, + .release_port = mpc52xx_uart_release_port, + .request_port = mpc52xx_uart_request_port, + .config_port = mpc52xx_uart_config_port, + .verify_port = mpc52xx_uart_verify_port +}; + + +/* ======================================================================== */ +/* Interrupt handling */ +/* ======================================================================== */ + +static inline int +mpc52xx_uart_int_rx_chars(struct uart_port *port, struct pt_regs *regs) +{ + struct tty_struct *tty = port->info->tty; + unsigned char ch; + unsigned short status; + + /* While we can read, do so ! */ + while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) & + MPC52xx_PSC_SR_RXRDY) { + + /* If we are full, just stop reading */ + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + break; + + /* Get the char */ + ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8); + + /* Handle sysreq char */ +#ifdef SUPPORT_SYSRQ + if (uart_handle_sysrq_char(port, ch, regs)) { + port->sysrq = 0; + continue; + } +#endif + + /* Store it */ + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = 0; + port->icount.rx++; + + if ( status & (MPC52xx_PSC_SR_PE | + MPC52xx_PSC_SR_FE | + MPC52xx_PSC_SR_RB | + MPC52xx_PSC_SR_OE) ) { + + if (status & MPC52xx_PSC_SR_RB) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + uart_handle_break(port); + } else if (status & MPC52xx_PSC_SR_PE) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (status & MPC52xx_PSC_SR_FE) + *tty->flip.flag_buf_ptr = TTY_FRAME; + if (status & MPC52xx_PSC_SR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + if (tty->flip.count < (TTY_FLIPBUF_SIZE-1)) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + } + + /* Clear error condition */ + out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT); + + } + + tty->flip.char_buf_ptr++; + tty->flip.flag_buf_ptr++; + tty->flip.count++; + + } + + tty_flip_buffer_push(tty); + + return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY; +} + +static inline int +mpc52xx_uart_int_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + /* Process out of band chars */ + if (port->x_char) { + out_8(&PSC(port)->mpc52xx_psc_buffer_8, port->x_char); + port->icount.tx++; + port->x_char = 0; + return 1; + } + + /* Nothing to do ? */ + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mpc52xx_uart_stop_tx(port,0); + return 0; + } + + /* Send chars */ + while (in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXRDY) { + out_8(&PSC(port)->mpc52xx_psc_buffer_8, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* Maybe we're done after all */ + if (uart_circ_empty(xmit)) { + mpc52xx_uart_stop_tx(port,0); + return 0; + } + + return 1; +} + +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = (struct uart_port *) dev_id; + unsigned long pass = ISR_PASS_LIMIT; + unsigned int keepgoing; + unsigned short status; + + if ( irq != port->irq ) { + printk( KERN_WARNING + "mpc52xx_uart_int : " \ + "Received wrong int %d. Waiting for %d\n", + irq, port->irq); + return IRQ_NONE; + } + + spin_lock(&port->lock); + + /* While we have stuff to do, we continue */ + do { + /* If we don't find anything to do, we stop */ + keepgoing = 0; + + /* Read status */ + status = in_be16(&PSC(port)->mpc52xx_psc_isr); + status &= port->read_status_mask; + + /* Do we need to receive chars ? */ + /* For this RX interrupts must be on and some chars waiting */ + if ( status & MPC52xx_PSC_IMR_RXRDY ) + keepgoing |= mpc52xx_uart_int_rx_chars(port, regs); + + /* Do we need to send chars ? */ + /* For this, TX must be ready and TX interrupt enabled */ + if ( status & MPC52xx_PSC_IMR_TXRDY ) + keepgoing |= mpc52xx_uart_int_tx_chars(port); + + /* Limit number of iteration */ + if ( !(--pass) ) + keepgoing = 0; + + } while (keepgoing); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + + +/* ======================================================================== */ +/* Console ( if applicable ) */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE + +static void __init +mpc52xx_console_get_options(struct uart_port *port, + int *baud, int *parity, int *bits, int *flow) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned char mr1; + + /* Read the mode registers */ + out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); + mr1 = in_8(&psc->mode); + + /* CT{U,L}R are write-only ! */ + *baud = __res.bi_baudrate ? + __res.bi_baudrate : CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + + /* Parse them */ + switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { + case MPC52xx_PSC_MODE_5_BITS: *bits = 5; break; + case MPC52xx_PSC_MODE_6_BITS: *bits = 6; break; + case MPC52xx_PSC_MODE_7_BITS: *bits = 7; break; + case MPC52xx_PSC_MODE_8_BITS: + default: *bits = 8; + } + + if (mr1 & MPC52xx_PSC_MODE_PARNONE) + *parity = 'n'; + else + *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; +} + +static void +mpc52xx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned int i, j; + + /* Disable interrupts */ + out_be16(&psc->mpc52xx_psc_imr, 0); + + /* Wait the TX buffer to be empty */ + j = 5000000; /* Maximum wait */ + while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && + --j) + udelay(1); + + /* Write all the chars */ + for ( i=0 ; impc52xx_psc_buffer_8, *s); + + /* Line return handling */ + if ( *s++ == '\n' ) + out_8(&psc->mpc52xx_psc_buffer_8, '\r'); + + /* Wait the TX buffer to be empty */ + j = 20000; /* Maximum wait */ + while (!(in_be16(&psc->mpc52xx_psc_status) & + MPC52xx_PSC_SR_TXEMP) && --j) + udelay(1); + } + + /* Restore interrupt state */ + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static int __init +mpc52xx_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + + int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + + /* Basic port init. Needed since we use some uart_??? func before + * real init for early access */ + spin_lock_init(&port->lock); + port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */ + port->ops = &mpc52xx_uart_ops; + port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1)); + + /* We ioremap ourself */ + port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE); + if (port->membase == NULL) + return -EINVAL; + + /* Setup the port parameters accoding to options */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +extern struct uart_driver mpc52xx_uart_driver; + +static struct console mpc52xx_console = { + .name = "ttyS", + .write = mpc52xx_console_write, + .device = uart_console_device, + .setup = mpc52xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyS0 ) */ + .data = &mpc52xx_uart_driver, +}; + + +static int __init +mpc52xx_console_init(void) +{ + register_console(&mpc52xx_console); + return 0; +} + +console_initcall(mpc52xx_console_init); + +#define MPC52xx_PSC_CONSOLE &mpc52xx_console +#else +#define MPC52xx_PSC_CONSOLE NULL +#endif + + +/* ======================================================================== */ +/* UART Driver */ +/* ======================================================================== */ + +static struct uart_driver mpc52xx_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "mpc52xx_psc_uart", + .dev_name = "ttyS", + .devfs_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = MPC52xx_PSC_MAXNUM, + .cons = MPC52xx_PSC_CONSOLE, +}; + + +/* ======================================================================== */ +/* Platform Driver */ +/* ======================================================================== */ + +static int __devinit +mpc52xx_uart_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct resource *res = pdev->resource; + + struct uart_port *port = NULL; + int i, idx, ret; + + /* Check validity & presence */ + idx = pdev->id; + if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + + if (!mpc52xx_match_psc_function(idx,"uart")) + return -ENODEV; + + /* Init the port structure */ + port = &mpc52xx_uart_ports[idx]; + + memset(port, 0x00, sizeof(struct uart_port)); + + spin_lock_init(&port->lock); + port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */ + port->fifosize = 255; /* Should be 512 ! But it can't be */ + /* stored in a unsigned char */ + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | + ( uart_console(port) ? 0 : UPF_IOREMAP ); + port->line = idx; + port->ops = &mpc52xx_uart_ops; + + /* Search for IRQ and mapbase */ + for (i=0 ; inum_resources ; i++, res++) { + if (res->flags & IORESOURCE_MEM) + port->mapbase = res->start; + else if (res->flags & IORESOURCE_IRQ) + port->irq = res->start; + } + if (!port->irq || !port->mapbase) + return -EINVAL; + + /* Add the port to the uart sub-system */ + ret = uart_add_one_port(&mpc52xx_uart_driver, port); + if (!ret) + dev_set_drvdata(dev, (void*)port); + + return ret; +} + +static int +mpc52xx_uart_remove(struct device *dev) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + + if (port) + uart_remove_one_port(&mpc52xx_uart_driver, port); + + return 0; +} + +#ifdef CONFIG_PM +static int +mpc52xx_uart_suspend(struct device *dev, u32 state, u32 level) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); + + if (sport && level == SUSPEND_DISABLE) + uart_suspend_port(&mpc52xx_uart_driver, port); + + return 0; +} + +static int +mpc52xx_uart_resume(struct device *dev, u32 level) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); + + if (port && level == RESUME_ENABLE) + uart_resume_port(&mpc52xx_uart_driver, port); + + return 0; +} +#endif + +static struct device_driver mpc52xx_uart_platform_driver = { + .name = "mpc52xx-psc", + .bus = &platform_bus_type, + .probe = mpc52xx_uart_probe, + .remove = mpc52xx_uart_remove, +#ifdef CONFIG_PM + .suspend = mpc52xx_uart_suspend, + .resume = mpc52xx_uart_resume, +#endif +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: MPC52xx PSC driver\n"); + + ret = uart_register_driver(&mpc52xx_uart_driver); + if (ret == 0) { + ret = driver_register(&mpc52xx_uart_platform_driver); + if (ret) + uart_unregister_driver(&mpc52xx_uart_driver); + } + + return ret; +} + +static void __exit +mpc52xx_uart_exit(void) +{ + driver_unregister(&mpc52xx_uart_platform_driver); + uart_unregister_driver(&mpc52xx_uart_driver); +} + + +module_init(mpc52xx_uart_init); +module_exit(mpc52xx_uart_exit); + +MODULE_AUTHOR("Sylvain Munaut "); +MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3