From 80ff0fd3ab6451407a20c19b80c1643c4a6d6434 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 5 May 2009 17:35:21 -0700 Subject: Staging: Add octeon-ethernet driver files. The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui ports present on the Cavium OCTEON family of SOCs. These SOCs are multi-core mips64 processors with existing support over in arch/mips. The driver files can be categorized into three basic groups: 1) Register definitions, these are named cvmx-*-defs.h 2) Main driver code, these have names that don't start cvmx-. 3) Interface specific functions and other utility code, names starting with cvmx- Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/cvmx-helper-rgmii.c | 525 +++++++++++++++++++++++++++++ 1 file changed, 525 insertions(+) create mode 100644 drivers/staging/octeon/cvmx-helper-rgmii.c (limited to 'drivers/staging/octeon/cvmx-helper-rgmii.c') diff --git a/drivers/staging/octeon/cvmx-helper-rgmii.c b/drivers/staging/octeon/cvmx-helper-rgmii.c new file mode 100644 index 00000000000..aa2d5d7fee2 --- /dev/null +++ b/drivers/staging/octeon/cvmx-helper-rgmii.c @@ -0,0 +1,525 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for RGMII/GMII/MII initialization, configuration, + * and monitoring. + */ +#include + +#include "cvmx-config.h" + + +#include "cvmx-mdio.h" +#include "cvmx-pko.h" +#include "cvmx-helper.h" +#include "cvmx-helper-board.h" + +#include +#include "cvmx-gmxx-defs.h" +#include "cvmx-asxx-defs.h" +#include "cvmx-dbg-defs.h" + +void __cvmx_interrupt_gmxx_enable(int interface); +void __cvmx_interrupt_asxx_enable(int block); + +/** + * Probe RGMII ports and determine the number present + * + * @interface: Interface to probe + * + * Returns Number of RGMII/GMII/MII ports (0-4). + */ +int __cvmx_helper_rgmii_probe(int interface) +{ + int num_ports = 0; + union cvmx_gmxx_inf_mode mode; + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (mode.s.type) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + cvmx_dprintf("ERROR: RGMII initialize called in " + "SPI interface\n"); + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * On these chips "type" says we're in + * GMII/MII mode. This limits us to 2 ports + */ + num_ports = 2; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); + } + } else { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + num_ports = 4; + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + num_ports = 3; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); + } + } + return num_ports; +} + +/** + * Put an RGMII interface in loopback mode. Internal packets sent + * out will be received back again on the same port. Externally + * received packets will echo back out. + * + * @port: IPD port number to loop. + */ +void cvmx_helper_rgmii_internal_loopback(int port) +{ + int interface = (port >> 4) & 1; + int index = port & 0xf; + uint64_t tmp; + + union cvmx_gmxx_prtx_cfg gmx_cfg; + gmx_cfg.u64 = 0; + gmx_cfg.s.duplex = 1; + gmx_cfg.s.slottime = 1; + gmx_cfg.s.speed = 1; + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + tmp = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); +} + +/** + * Workaround ASX setup errata with CN38XX pass1 + * + * @interface: Interface to setup + * @port: Port to setup (0..3) + * @cpu_clock_hz: + * Chip frequency in Hertz + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_errata_asx_pass1(int interface, int port, + int cpu_clock_hz) +{ + /* Set hi water mark as per errata GMX-4 */ + if (cpu_clock_hz >= 325000000 && cpu_clock_hz < 375000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 12); + else if (cpu_clock_hz >= 375000000 && cpu_clock_hz < 437000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 11); + else if (cpu_clock_hz >= 437000000 && cpu_clock_hz < 550000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 10); + else if (cpu_clock_hz >= 550000000 && cpu_clock_hz < 687000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 9); + else + cvmx_dprintf("Illegal clock frequency (%d). " + "CVMX_ASXX_TX_HI_WATERX not set\n", cpu_clock_hz); + return 0; +} + +/** + * Configure all of the ASX, GMX, and PKO regsiters required + * to get RGMII to function on the supplied interface. + * + * @interface: PKO Interface to configure (0 or 1) + * + * Returns Zero on success + */ +int __cvmx_helper_rgmii_enable(int interface) +{ + int num_ports = cvmx_helper_ports_on_interface(interface); + int port; + struct cvmx_sysinfo *sys_info_ptr = cvmx_sysinfo_get(); + union cvmx_gmxx_inf_mode mode; + union cvmx_asxx_tx_prt_en asx_tx; + union cvmx_asxx_rx_prt_en asx_rx; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (mode.s.en == 0) + return -1; + if ((OCTEON_IS_MODEL(OCTEON_CN38XX) || + OCTEON_IS_MODEL(OCTEON_CN58XX)) && mode.s.type == 1) + /* Ignore SPI interfaces */ + return -1; + + /* Configure the ASX registers needed to use the RGMII ports */ + asx_tx.u64 = 0; + asx_tx.s.prt_en = cvmx_build_mask(num_ports); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64); + + asx_rx.u64 = 0; + asx_rx.s.prt_en = cvmx_build_mask(num_ports); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64); + + /* Configure the GMX registers needed to use the RGMII ports */ + for (port = 0; port < num_ports; port++) { + /* Setting of CVMX_GMXX_TXX_THRESH has been moved to + __cvmx_helper_setup_gmx() */ + + if (cvmx_octeon_is_pass1()) + __cvmx_helper_errata_asx_pass1(interface, port, + sys_info_ptr-> + cpu_clock_hz); + else { + /* + * Configure more flexible RGMII preamble + * checking. Pass 1 doesn't support this + * feature. + */ + union cvmx_gmxx_rxx_frm_ctl frm_ctl; + frm_ctl.u64 = + cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL + (port, interface)); + /* New field, so must be compile time */ + frm_ctl.s.pre_free = 1; + cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface), + frm_ctl.u64); + } + + /* + * Each pause frame transmitted will ask for about 10M + * bit times before resume. If buffer space comes + * available before that time has expired, an XON + * pause frame (0 time) will be transmitted to restart + * the flow. + */ + cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface), + 20000); + cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL + (port, interface), 19000); + + if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), + 16); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), + 16); + } else { + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), + 24); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), + 24); + } + } + + __cvmx_helper_setup_gmx(interface, num_ports); + + /* enable the ports now */ + for (port = 0; port < num_ports; port++) { + union cvmx_gmxx_prtx_cfg gmx_cfg; + cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port + (interface, port)); + gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface)); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(port, interface), + gmx_cfg.u64); + } + __cvmx_interrupt_asxx_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +cvmx_helper_link_info_t __cvmx_helper_rgmii_link_get(int ipd_port) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_asxx_prt_loop asxx_prt_loop; + + asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + if (asxx_prt_loop.s.int_loop & (1 << index)) { + /* Force 1Gbps full duplex on internal loopback */ + cvmx_helper_link_info_t result; + result.u64 = 0; + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + return result; + } else + return __cvmx_helper_board_link_get(ipd_port); +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). It is normally best to use + * cvmx_helper_link_autoconf() instead. + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_rgmii_link_set(int ipd_port, + cvmx_helper_link_info_t link_info) +{ + int result = 0; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_gmxx_prtx_cfg original_gmx_cfg; + union cvmx_gmxx_prtx_cfg new_gmx_cfg; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos_save[16]; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp_save; + int i; + + /* Ignore speed sets in the simulator */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) + return 0; + + /* Read the current settings so we know the current enable state */ + original_gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + new_gmx_cfg = original_gmx_cfg; + + /* Disable the lowest level RX */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) & + ~(1 << index)); + + /* Disable all queues so that TX should become idle */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); + pko_mem_queue_qos.u64 = cvmx_read_csr(CVMX_PKO_MEM_QUEUE_QOS); + pko_mem_queue_qos.s.pid = ipd_port; + pko_mem_queue_qos.s.qid = queue; + pko_mem_queue_qos_save[i] = pko_mem_queue_qos; + pko_mem_queue_qos.s.qos_mask = 0; + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos.u64); + } + + /* Disable backpressure */ + gmx_tx_ovr_bp.u64 = cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); + gmx_tx_ovr_bp_save = gmx_tx_ovr_bp; + gmx_tx_ovr_bp.s.bp &= ~(1 << index); + gmx_tx_ovr_bp.s.en |= 1 << index; + cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp.u64); + cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); + + /* + * Poll the GMX state machine waiting for it to become + * idle. Preferably we should only change speed when it is + * idle. If it doesn't become idle we will still do the speed + * change, but there is a slight chance that GMX will + * lockup. + */ + cvmx_write_csr(CVMX_NPI_DBG_SELECT, + interface * 0x800 + index * 0x100 + 0x880); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 7, + ==, 0, 10000); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 0xf, + ==, 0, 10000); + + /* Disable the port before we make any changes */ + new_gmx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Set full/half duplex */ + if (cvmx_octeon_is_pass1()) + /* Half duplex is broken for 38XX Pass 1 */ + new_gmx_cfg.s.duplex = 1; + else if (!link_info.s.link_up) + /* Force full duplex on down links */ + new_gmx_cfg.s.duplex = 1; + else + new_gmx_cfg.s.duplex = link_info.s.full_duplex; + + /* Set the link speed. Anything unknown is set to 1Gbps */ + if (link_info.s.speed == 10) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else if (link_info.s.speed == 100) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else { + new_gmx_cfg.s.slottime = 1; + new_gmx_cfg.s.speed = 1; + } + + /* Adjust the clocks */ + if (link_info.s.speed == 10) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 50); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else if (link_info.s.speed == 100) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 5); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + } + + if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + if ((link_info.s.speed == 10) || (link_info.s.speed == 100)) { + union cvmx_gmxx_inf_mode mode; + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + /* + * Port .en .type .p0mii Configuration + * ---- --- ----- ------ ----------------------------------------- + * X 0 X X All links are disabled. + * 0 1 X 0 Port 0 is RGMII + * 0 1 X 1 Port 0 is MII + * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. + * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or + * MII port is selected by GMX_PRT1_CFG[SPEED]. + */ + + /* In MII mode, CLK_CNT = 1. */ + if (((index == 0) && (mode.s.p0mii == 1)) + || ((index != 0) && (mode.s.type == 1))) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK + (index, interface), 1); + } + } + } + + /* Do a read to make sure all setup stuff is complete */ + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Save the new GMX setting without enabling the port */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + /* Enable the lowest level RX */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) | (1 << + index)); + + /* Re-enable the TX path */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, + pko_mem_queue_qos_save[i].u64); + } + + /* Restore backpressure */ + cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp_save.u64); + + /* Restore the GMX enable state. Port config is complete */ + new_gmx_cfg.s.en = original_gmx_cfg.s.en; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + return result; +} + +/** + * Configure a port for internal and/or external loopback. Internal loopback + * causes packets sent by the port to be received by Octeon. External loopback + * causes packets received from the wire to sent out again. + * + * @ipd_port: IPD/PKO port to loopback. + * @enable_internal: + * Non zero if you want internal loopback + * @enable_external: + * Non zero if you want external loopback + * + * Returns Zero on success, negative on failure. + */ +int __cvmx_helper_rgmii_configure_loopback(int ipd_port, int enable_internal, + int enable_external) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + int original_enable; + union cvmx_gmxx_prtx_cfg gmx_cfg; + union cvmx_asxx_prt_loop asxx_prt_loop; + + /* Read the current enable state and save it */ + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + original_enable = gmx_cfg.s.en; + /* Force port to be disabled */ + gmx_cfg.s.en = 0; + if (enable_internal) { + /* Force speed if we're doing internal loopback */ + gmx_cfg.s.duplex = 1; + gmx_cfg.s.slottime = 1; + gmx_cfg.s.speed = 1; + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + } + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + + /* Set the loopback bits */ + asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + if (enable_internal) + asxx_prt_loop.s.int_loop |= 1 << index; + else + asxx_prt_loop.s.int_loop &= ~(1 << index); + if (enable_external) + asxx_prt_loop.s.ext_loop |= 1 << index; + else + asxx_prt_loop.s.ext_loop &= ~(1 << index); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), asxx_prt_loop.u64); + + /* Force enables in internal loopback */ + if (enable_internal) { + uint64_t tmp; + tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), + (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + (1 << index) | tmp); + original_enable = 1; + } + + /* Restore the enable state */ + gmx_cfg.s.en = original_enable; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + return 0; +} -- cgit v1.2.3