From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@ppc970.osdl.org>
Date: Sat, 16 Apr 2005 15:20:36 -0700
Subject: Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
---
 drivers/usb/core/otg_whitelist.h | 112 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 112 insertions(+)
 create mode 100644 drivers/usb/core/otg_whitelist.h

(limited to 'drivers/usb/core/otg_whitelist.h')

diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
new file mode 100644
index 00000000000..627a5a2fc9c
--- /dev/null
+++ b/drivers/usb/core/otg_whitelist.h
@@ -0,0 +1,112 @@
+/*
+ * drivers/usb/core/otg_whitelist.h
+ *
+ * Copyright (C) 2004 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * This OTG Whitelist is the OTG "Targeted Peripheral List".  It should
+ * mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
+ *
+ * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
+ */ 
+
+static struct usb_device_id whitelist_table [] = {
+
+/* hubs are optional in OTG, but very handy ... */
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
+
+#ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
+/* FIXME actually, printers are NOT supposed to use device classes;
+ * they're supposed to use interface classes...
+ */
+{ USB_DEVICE_INFO(7, 1, 1) },
+{ USB_DEVICE_INFO(7, 1, 2) },
+{ USB_DEVICE_INFO(7, 1, 3) },
+#endif
+
+#ifdef	CONFIG_USB_CDCETHER
+/* Linux-USB CDC Ethernet gadget */
+{ USB_DEVICE(0x0525, 0xa4a1), },
+/* Linux-USB CDC Ethernet + RNDIS gadget */
+{ USB_DEVICE(0x0525, 0xa4a2), },
+#endif
+
+#if	defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
+/* gadget zero, for testing */
+{ USB_DEVICE(0x0525, 0xa4a0), },
+#endif
+
+{ }	/* Terminating entry */
+};
+
+static int is_targeted(struct usb_device *dev)
+{
+	struct usb_device_id	*id = whitelist_table;
+
+	/* possible in developer configs only! */
+	if (!dev->bus->otg_port)
+		return 1;
+
+	/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
+	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && 
+	     le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
+		return 0;
+
+	/* NOTE: can't use usb_match_id() since interface caches
+	 * aren't set up yet. this is cut/paste from that code.
+	 */
+	for (id = whitelist_table; id->match_flags; id++) {
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+		    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+		    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+			continue;
+
+		/* No need to test id->bcdDevice_lo != 0, since 0 is never
+		   greater than any unsigned number. */
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+		    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+		    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+		    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+		    (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass))
+			continue;
+
+		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+			continue;
+
+		return 1;
+	}
+
+	/* add other match criteria here ... */
+
+
+	/* OTG MESSAGE: report errors here, customize to match your product */
+	dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
+		le16_to_cpu(dev->descriptor.idVendor),
+		le16_to_cpu(dev->descriptor.idProduct));
+#ifdef	CONFIG_USB_OTG_WHITELIST
+	return 0;
+#else
+	return 1;
+#endif
+}
+
-- 
cgit v1.2.3