From abb306416a7ec2386678de0da6b632a6cb068af0 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 27 Apr 2009 13:33:24 -0400 Subject: USB: move PCI host controllers to new PM framework This patch (as1236) converts the USB PCI power management routines over to the new PM framework. Signed-off-by: Alan Stern Acked-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 242 +++++++++++++++++++++++---------------------- drivers/usb/core/hcd.h | 9 +- 2 files changed, 126 insertions(+), 125 deletions(-) (limited to 'drivers/usb/core') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index a4301dc02d2..5db4d40db83 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -185,194 +185,198 @@ void usb_hcd_pci_remove(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(usb_hcd_pci_remove); - -#ifdef CONFIG_PM - /** - * usb_hcd_pci_suspend - power management suspend of a PCI-based HCD - * @dev: USB Host Controller being suspended - * @message: Power Management message describing this state transition - * - * Store this function in the HCD's struct pci_driver as .suspend. + * usb_hcd_pci_shutdown - shutdown host controller + * @dev: USB Host Controller being shutdown */ -int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) +void usb_hcd_pci_shutdown(struct pci_dev *dev) +{ + struct usb_hcd *hcd; + + hcd = pci_get_drvdata(dev); + if (!hcd) + return; + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} +EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); + +#ifdef CONFIG_PM_SLEEP + +static int check_root_hub_suspended(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + + if (!(hcd->state == HC_STATE_SUSPENDED || + hcd->state == HC_STATE_HALT)) { + dev_warn(dev, "Root hub is not suspended\n"); + return -EBUSY; + } + return 0; +} + +static int hcd_pci_suspend(struct device *dev) { - struct usb_hcd *hcd = pci_get_drvdata(dev); - int retval = 0; - int wake, w; - int has_pci_pm; + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface * and the stub usb_device (which we check here). But maybe it * didn't; writing sysfs power/state files ignores such rules... - * - * We must ignore the FREEZE vs SUSPEND distinction here, because - * otherwise the swsusp will save (and restore) garbage state. */ - if (!(hcd->state == HC_STATE_SUSPENDED || - hcd->state == HC_STATE_HALT)) { - dev_warn(&dev->dev, "Root hub is not suspended\n"); - retval = -EBUSY; - goto done; - } + retval = check_root_hub_suspended(dev); + if (retval) + return retval; /* We might already be suspended (runtime PM -- not yet written) */ - if (dev->current_state != PCI_D0) - goto done; + if (pci_dev->current_state != PCI_D0) + return retval; if (hcd->driver->pci_suspend) { - retval = hcd->driver->pci_suspend(hcd, message); + retval = hcd->driver->pci_suspend(hcd, PMSG_SUSPEND); suspend_report_result(hcd->driver->pci_suspend, retval); if (retval) - goto done; + return retval; } - synchronize_irq(dev->irq); + synchronize_irq(pci_dev->irq); /* Downstream ports from this root hub should already be quiesced, so * there will be no DMA activity. Now we can shut down the upstream - * link (except maybe for PME# resume signaling) and enter some PCI - * low power state, if the hardware allows. + * link (except maybe for PME# resume signaling). We'll enter a + * low power state during suspend_noirq, if the hardware allows. */ - pci_disable_device(dev); + pci_disable_device(pci_dev); + return retval; +} + +static int hcd_pci_suspend_noirq(struct device *dev) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; + + retval = check_root_hub_suspended(dev); + if (retval) + return retval; - pci_save_state(dev); + pci_save_state(pci_dev); - /* Don't fail on error to enable wakeup. We rely on pci code - * to reject requests the hardware can't implement, rather - * than coding the same thing. + /* If the root hub is HALTed rather than SUSPENDed, + * disallow remote wakeup. */ - wake = (hcd->state == HC_STATE_SUSPENDED && - device_may_wakeup(&dev->dev)); - w = pci_wake_from_d3(dev, wake); - if (w < 0) - wake = w; - dev_dbg(&dev->dev, "wakeup: %d\n", wake); - - /* Don't change state if we don't need to */ - if (message.event == PM_EVENT_FREEZE || - message.event == PM_EVENT_PRETHAW) { - dev_dbg(&dev->dev, "--> no state change\n"); - goto done; - } + if (hcd->state == HC_STATE_HALT) + device_set_wakeup_enable(dev, 0); + dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev)); - has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (!has_pci_pm) { - dev_dbg(&dev->dev, "--> PCI D0 legacy\n"); + /* Possibly enable remote wakeup, + * choose the appropriate low-power state, and go to that state. + */ + retval = pci_prepare_to_sleep(pci_dev); + if (retval == -EIO) { /* Low-power not supported */ + dev_dbg(dev, "--> PCI D0 legacy\n"); + retval = 0; + } else if (retval == 0) { + dev_dbg(dev, "--> PCI %s\n", + pci_power_name(pci_dev->current_state)); } else { - - /* NOTE: dev->current_state becomes nonzero only here, and - * only for devices that support PCI PM. Also, exiting - * PCI_D3 (but not PCI_D1 or PCI_D2) is allowed to reset - * some device state (e.g. as part of clock reinit). - */ - retval = pci_set_power_state(dev, PCI_D3hot); - suspend_report_result(pci_set_power_state, retval); - if (retval == 0) { - dev_dbg(&dev->dev, "--> PCI D3\n"); - } else { - dev_dbg(&dev->dev, "PCI D3 suspend fail, %d\n", - retval); - pci_restore_state(dev); - } + suspend_report_result(pci_prepare_to_sleep, retval); + return retval; } #ifdef CONFIG_PPC_PMAC - if (retval == 0) { - /* Disable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 0); - } + /* Disable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(pci_dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0); } #endif - - done: return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); -/** - * usb_hcd_pci_resume - power management resume of a PCI-based HCD - * @dev: USB Host Controller being resumed - * - * Store this function in the HCD's struct pci_driver as .resume. - */ -int usb_hcd_pci_resume(struct pci_dev *dev) +static int hcd_pci_resume_noirq(struct device *dev) { - struct usb_hcd *hcd; - int retval; + struct pci_dev *pci_dev = to_pci_dev(dev); #ifdef CONFIG_PPC_PMAC /* Reenable ASIC clocks for USB */ if (machine_is(powermac)) { struct device_node *of_node; - of_node = pci_device_to_OF_node(dev); + of_node = pci_device_to_OF_node(pci_dev); if (of_node) pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 1); } #endif - pci_restore_state(dev); + /* Go back to D0 and disable remote wakeup */ + pci_back_from_sleep(pci_dev); + return 0; +} + +static int resume_common(struct device *dev, bool hibernated) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; - hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { - dev_dbg(hcd->self.controller, - "can't resume, not suspended!\n"); + dev_dbg(dev, "can't resume, not suspended!\n"); return 0; } - pci_enable_wake(dev, PCI_D0, false); - - retval = pci_enable_device(dev); + retval = pci_enable_device(pci_dev); if (retval < 0) { - dev_err(&dev->dev, "can't re-enable after resume, %d!\n", - retval); + dev_err(dev, "can't re-enable after resume, %d!\n", retval); return retval; } - pci_set_master(dev); - - /* yes, ignore this result too... */ - (void) pci_wake_from_d3(dev, 0); + pci_set_master(pci_dev); clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); if (hcd->driver->pci_resume) { retval = hcd->driver->pci_resume(hcd); if (retval) { - dev_err(hcd->self.controller, - "PCI post-resume error %d!\n", retval); + dev_err(dev, "PCI post-resume error %d!\n", retval); usb_hc_died(hcd); } } return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_resume); -#endif /* CONFIG_PM */ - -/** - * usb_hcd_pci_shutdown - shutdown host controller - * @dev: USB Host Controller being shutdown - */ -void usb_hcd_pci_shutdown(struct pci_dev *dev) +static int hcd_pci_resume(struct device *dev) { - struct usb_hcd *hcd; - - hcd = pci_get_drvdata(dev); - if (!hcd) - return; + return resume_common(dev, false); +} - if (hcd->driver->shutdown) - hcd->driver->shutdown(hcd); +static int hcd_pci_restore(struct device *dev) +{ + return resume_common(dev, true); } -EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); +struct dev_pm_ops usb_hcd_pci_pm_ops = { + .suspend = hcd_pci_suspend, + .suspend_noirq = hcd_pci_suspend_noirq, + .resume_noirq = hcd_pci_resume_noirq, + .resume = hcd_pci_resume, + .freeze = check_root_hub_suspended, + .freeze_noirq = check_root_hub_suspended, + .thaw_noirq = NULL, + .thaw = NULL, + .poweroff = hcd_pci_suspend, + .poweroff_noirq = hcd_pci_suspend_noirq, + .restore_noirq = hcd_pci_resume_noirq, + .restore = hcd_pci_restore, +}; +EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); + +#endif /* CONFIG_PM_SLEEP */ diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index e7d4479de41..7f068d6e694 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -261,14 +261,11 @@ struct pci_device_id; extern int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id); extern void usb_hcd_pci_remove(struct pci_dev *dev); - -#ifdef CONFIG_PM -extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_resume(struct pci_dev *dev); -#endif /* CONFIG_PM */ - extern void usb_hcd_pci_shutdown(struct pci_dev *dev); +#ifdef CONFIG_PM_SLEEP +extern struct dev_pm_ops usb_hcd_pci_pm_ops; +#endif #endif /* CONFIG_PCI */ /* pci-ish (pdev null is ok) buffer alloc/mapping support */ -- cgit v1.2.3