From d7e055f1975cac560427c924d2bff4b5d41fe442 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 27 Oct 2009 10:54:49 -0700 Subject: USB: ehci: Minor constant fix for SCHEDULE_SLOP. Change the constant SCHEDULE_SLOP to be 80 microframes, instead of 10 frames. It was always multiplied by 8 to convert frames to microframes. SCHEDULE_SLOP is only used in ehci-sched.c. Signed-off-by: Sarah Sharp Cc: David Brownell Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a5535b5e3fe..84079ebbe65 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1385,7 +1385,7 @@ sitd_slot_ok ( * given EHCI_TUNE_FLS and the slop). Or, write a smarter scheduler! */ -#define SCHEDULE_SLOP 10 /* frames */ +#define SCHEDULE_SLOP 80 /* microframes */ static int iso_stream_schedule ( @@ -1399,7 +1399,7 @@ iso_stream_schedule ( unsigned mod = ehci->periodic_size << 3; struct ehci_iso_sched *sched = urb->hcpriv; - if (sched->span > (mod - 8 * SCHEDULE_SLOP)) { + if (sched->span > (mod - SCHEDULE_SLOP)) { ehci_dbg (ehci, "iso request %p too long\n", urb); status = -EFBIG; goto fail; @@ -1432,7 +1432,7 @@ iso_stream_schedule ( start += mod; /* Fell behind (by up to twice the slop amount)? */ - if (start >= max - 2 * 8 * SCHEDULE_SLOP) + if (start >= max - 2 * SCHEDULE_SLOP) start += period * DIV_ROUND_UP( max - start, period) - mod; @@ -1451,7 +1451,7 @@ iso_stream_schedule ( * can also help high bandwidth if the dma and irq loads don't * jump until after the queue is primed. */ - start = SCHEDULE_SLOP * 8 + (now & ~0x07); + start = SCHEDULE_SLOP + (now & ~0x07); start %= mod; stream->next_uframe = start; -- cgit v1.2.3