From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/usb/serial/keyspan_usa49msg.h | 282 ++++++++++++++++++++++++++++++++++ 1 file changed, 282 insertions(+) create mode 100644 drivers/usb/serial/keyspan_usa49msg.h (limited to 'drivers/usb/serial/keyspan_usa49msg.h') diff --git a/drivers/usb/serial/keyspan_usa49msg.h b/drivers/usb/serial/keyspan_usa49msg.h new file mode 100644 index 00000000000..163b2dea2ec --- /dev/null +++ b/drivers/usb/serial/keyspan_usa49msg.h @@ -0,0 +1,282 @@ +/* + usa49msg.h + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA49W + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + 4th revision: USA49W version + + Buffer formats for RX/TX data messages are not defined by + a structure, but are described here: + + USB OUT (host -> USAxx, transmit) messages contain a + REQUEST_ACK indicator (set to 0xff to request an ACK at the + completion of transmit; 0x00 otherwise), followed by data: + + RQSTACK DAT DAT DAT ... + + with a total data length of 63. + + USB IN (USAxx -> host, receive) messages begin with a status + byte in which the 0x80 bit is either: + + (a) 0x80 bit clear + indicates that the bytes following it are all data + bytes: + + STAT DATA DATA DATA DATA DATA ... + + for a total of up to 63 DATA bytes, + + or: + + (b) 0x80 bit set + indiates that the bytes following alternate data and + status bytes: + + STAT DATA STAT DATA STAT DATA STAT DATA ... + + for a total of up to 32 DATA bytes. + + The valid bits in the STAT bytes are: + + OVERRUN 0x02 + PARITY 0x04 + FRAMING 0x08 + BREAK 0x10 + + Notes: + + (1) The OVERRUN bit can appear in either (a) or (b) format + messages, but the but the PARITY/FRAMING/BREAK bits + only appear in (b) format messages. + (2) For the host to determine the exact point at which the + overrun occurred (to identify the point in the data + stream at which the data was lost), it needs to count + 128 characters, starting at the first character of the + message in which OVERRUN was reported; the lost character(s) + would have been received between the 128th and 129th + characters. + (3) An RX data message in which the first byte has 0x80 clear + serves as a "break off" indicator. + (4) a control message specifying disablePort will be answered + with a status message, but no further status will be sent + until a control messages with enablePort is sent + + revision history: + + 1999feb10 add reportHskiaChanges to allow us to ignore them + 1999feb10 add txAckThreshold for fast+loose throughput enhancement + 1999mar30 beef up support for RX error reporting + 1999apr14 add resetDataToggle to control message + 2000jan04 merge with usa17msg.h + 2000mar08 clone from usa26msg.h -> usa49msg.h + 2000mar09 change to support 4 ports + 2000may03 change external clocking to match USA-49W hardware + 2000jun01 add extended BSD-style copyright text + 2001jul05 change message format to improve OVERRUN case +*/ + +#ifndef __USA49MSG__ +#define __USA49MSG__ + + +/* + Host->device messages sent on the global control endpoint: + + portNumber message + ---------- -------------------- + 0,1,2,3 portControlMessage + 0x80 globalControlMessage +*/ + +struct keyspan_usa49_portControlMessage +{ + /* + 0. 0/1/2/3 port control message follows + 0x80 set non-port control message follows + */ + u8 portNumber, + + /* + there are three types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the USA26): + */ + setClocking, // host requests baud rate be set + baudLo, // host does baud divisor calculation + baudHi, // baudHi is only used for first port (gives lower rates) + prescaler, // specified as N/8; values 8-ff are valid + // must be set any time internal baud rate is set; + txClocking, // 0=internal, 1=external/DSR + rxClocking, // 0=internal, 1=external/DSR + + setLcr, // host requests lcr be set + lcr, // use PARITY, STOPBITS, DATABITS below + + setFlowControl, // host requests flow control be set + ctsFlowControl, // 1=use CTS flow control, 0=don't + xonFlowControl, // 1=use XON/XOFF flow control, 0=don't + xonChar, // specified in current character format + xoffChar, // specified in current character format + + setRts, // host requests RTS output be set + rts, // 1=active, 0=inactive + + setDtr, // host requests DTR output be set + dtr; // 1=on, 0=off + + + /* + 3. configuration data which is simply used as is (no overhead, + but must be specified correctly in every host message). + */ + u8 forwardingLength, // forward when this number of chars available + dsrFlowControl, // 1=use DSR flow control, 0=don't + txAckThreshold, // 0=not allowed, 1=normal, 2-255 deliver ACK faster + loopbackMode; // 0=no loopback, 1=loopback enabled + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if both _txOn and _txOff flags are set, the + port ends in a TX_OFF state); any non-zero value is respected + */ + u8 _txOn, // enable transmitting (and continue if there's data) + _txOff, // stop transmitting + txFlush, // toss outbound data + txBreak, // turn on break (cleared by _txOn) + rxOn, // turn on receiver + rxOff, // turn off receiver + rxFlush, // toss inbound data + rxForward, // forward all inbound data, NOW (as if fwdLen==1) + returnStatus, // return current status (even if it hasn't changed) + resetDataToggle,// reset data toggle state to DATA0 + enablePort, // start servicing port (move data, check status) + disablePort; // stop servicing port (does implicit tx/rx flush/off) + +}; + +// defines for bits in lcr +#define USA_DATABITS_5 0x00 +#define USA_DATABITS_6 0x01 +#define USA_DATABITS_7 0x02 +#define USA_DATABITS_8 0x03 +#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes +#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte +#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte +#define USA_PARITY_NONE 0x00 +#define USA_PARITY_ODD 0x08 +#define USA_PARITY_EVEN 0x18 +#define PARITY_1 0x28 +#define PARITY_0 0x38 + +/* + during normal operation, status messages are returned + to the host whenever the board detects changes. In some + circumstances (e.g. Windows), status messages from the + device cause problems; to shut them off, the host issues + a control message with the disableStatusMessages flags + set (to any non-zero value). The device will respond to + this message, and then suppress further status messages; + it will resume sending status messages any time the host + sends any control message (either global or port-specific). +*/ + +struct keyspan_usa49_globalControlMessage +{ + u8 portNumber, // 0x80 + sendGlobalStatus, // 1/2=number of status responses requested + resetStatusToggle, // 1=reset global status toggle + resetStatusCount, // a cycling value + remoteWakeupEnable, // 0x10=P1, 0x20=P2, 0x40=P3, 0x80=P4 + disableStatusMessages; // 1=send no status until host talks +}; + +/* + Device->host messages send on the global status endpoint + + portNumber message + ---------- -------------------- + 0x00,0x01,0x02,0x03 portStatusMessage + 0x80 globalStatusMessage + 0x81 globalDebugMessage +*/ + +struct keyspan_usa49_portStatusMessage // one for each port +{ + u8 portNumber, // 0,1,2,3 + cts, // reports CTS pin + dcd, // reports DCD pin + dsr, // reports DSR pin + ri, // reports RI pin + _txOff, // transmit has been disabled (by host) + _txXoff, // transmit is in XOFF state (either host or RX XOFF) + rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off + controlResponse,// 1=a control message has been processed + txAck, // ACK (data TX complete) + rs232valid; // RS-232 signal valid +}; + +// bits in RX data message when STAT byte is included +#define RXERROR_OVERRUN 0x02 +#define RXERROR_PARITY 0x04 +#define RXERROR_FRAMING 0x08 +#define RXERROR_BREAK 0x10 + +struct keyspan_usa49_globalStatusMessage +{ + u8 portNumber, // 0x80=globalStatusMessage + sendGlobalStatus, // from request, decremented + resetStatusCount; // as in request +}; + +struct keyspan_usa49_globalDebugMessage +{ + u8 portNumber, // 0x81=globalDebugMessage + n, // typically a count/status byte + b; // typically a data byte +}; + +// ie: the maximum length of an EZUSB endpoint buffer +#define MAX_DATA_LEN 64 + +// update status approx. 60 times a second (16.6666 ms) +#define STATUS_UPDATE_INTERVAL 16 + +// status rationing tuning value (each port gets checked each n ms) +#define STATUS_RATION 10 + +#endif -- cgit v1.2.3