From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/video/pxafb.c | 1390 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1390 insertions(+) create mode 100644 drivers/video/pxafb.c (limited to 'drivers/video/pxafb.c') diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c new file mode 100644 index 00000000000..483ad9bab53 --- /dev/null +++ b/drivers/video/pxafb.c @@ -0,0 +1,1390 @@ +/* + * linux/drivers/video/pxafb.c + * + * Copyright (C) 1999 Eric A. Thomas. + * Copyright (C) 2004 Jean-Frederic Clere. + * Copyright (C) 2004 Ian Campbell. + * Copyright (C) 2004 Jeff Lackey. + * Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas + * which in turn is + * Based on acornfb.c Copyright (C) Russell King. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Intel PXA250/210 LCD Controller Frame Buffer Driver + * + * Please direct your questions and comments on this driver to the following + * email address: + * + * linux-arm-kernel@lists.arm.linux.org.uk + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/* + * Complain if VAR is out of range. + */ +#define DEBUG_VAR 1 + +#include "pxafb.h" + +/* Bits which should not be set in machine configuration structures */ +#define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB) +#define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP) + +static void (*pxafb_backlight_power)(int); +static void (*pxafb_lcd_power)(int); + +static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); +static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); + +#ifdef CONFIG_FB_PXA_PARAMETERS +#define PXAFB_OPTIONS_SIZE 256 +static char g_options[PXAFB_OPTIONS_SIZE] __initdata = ""; +#endif + +static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state) +{ + unsigned long flags; + + local_irq_save(flags); + /* + * We need to handle two requests being made at the same time. + * There are two important cases: + * 1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE) + * We must perform the unblanking, which will do our REENABLE for us. + * 2. When we are blanking, but immediately unblank before we have + * blanked. We do the "REENABLE" thing here as well, just to be sure. + */ + if (fbi->task_state == C_ENABLE && state == C_REENABLE) + state = (u_int) -1; + if (fbi->task_state == C_DISABLE && state == C_ENABLE) + state = C_REENABLE; + + if (state != (u_int)-1) { + fbi->task_state = state; + schedule_work(&fbi->task); + } + local_irq_restore(flags); +} + +static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int +pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, + u_int trans, struct fb_info *info) +{ + struct pxafb_info *fbi = (struct pxafb_info *)info; + u_int val, ret = 1; + + if (regno < fbi->palette_size) { + if (fbi->fb.var.grayscale) { + val = ((blue >> 8) & 0x00ff); + } else { + val = ((red >> 0) & 0xf800); + val |= ((green >> 5) & 0x07e0); + val |= ((blue >> 11) & 0x001f); + } + fbi->palette_cpu[regno] = val; + ret = 0; + } + return ret; +} + +static int +pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int trans, struct fb_info *info) +{ + struct pxafb_info *fbi = (struct pxafb_info *)info; + unsigned int val; + int ret = 1; + + /* + * If inverse mode was selected, invert all the colours + * rather than the register number. The register number + * is what you poke into the framebuffer to produce the + * colour you requested. + */ + if (fbi->cmap_inverse) { + red = 0xffff - red; + green = 0xffff - green; + blue = 0xffff - blue; + } + + /* + * If greyscale is true, then we convert the RGB value + * to greyscale no matter what visual we are using. + */ + if (fbi->fb.var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + + switch (fbi->fb.fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* + * 16-bit True Colour. We encode the RGB value + * according to the RGB bitfield information. + */ + if (regno < 16) { + u32 *pal = fbi->fb.pseudo_palette; + + val = chan_to_field(red, &fbi->fb.var.red); + val |= chan_to_field(green, &fbi->fb.var.green); + val |= chan_to_field(blue, &fbi->fb.var.blue); + + pal[regno] = val; + ret = 0; + } + break; + + case FB_VISUAL_STATIC_PSEUDOCOLOR: + case FB_VISUAL_PSEUDOCOLOR: + ret = pxafb_setpalettereg(regno, red, green, blue, trans, info); + break; + } + + return ret; +} + +/* + * pxafb_bpp_to_lccr3(): + * Convert a bits per pixel value to the correct bit pattern for LCCR3 + */ +static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var) +{ + int ret = 0; + switch (var->bits_per_pixel) { + case 1: ret = LCCR3_1BPP; break; + case 2: ret = LCCR3_2BPP; break; + case 4: ret = LCCR3_4BPP; break; + case 8: ret = LCCR3_8BPP; break; + case 16: ret = LCCR3_16BPP; break; + } + return ret; +} + +#ifdef CONFIG_CPU_FREQ +/* + * pxafb_display_dma_period() + * Calculate the minimum period (in picoseconds) between two DMA + * requests for the LCD controller. If we hit this, it means we're + * doing nothing but LCD DMA. + */ +static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var) +{ + /* + * Period = pixclock * bits_per_byte * bytes_per_transfer + * / memory_bits_per_pixel; + */ + return var->pixclock * 8 * 16 / var->bits_per_pixel; +} + +extern unsigned int get_clk_frequency_khz(int info); +#endif + +/* + * pxafb_check_var(): + * Get the video params out of 'var'. If a value doesn't fit, round it up, + * if it's too big, return -EINVAL. + * + * Round up in the following order: bits_per_pixel, xres, + * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, + * bitfields, horizontal timing, vertical timing. + */ +static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct pxafb_info *fbi = (struct pxafb_info *)info; + + if (var->xres < MIN_XRES) + var->xres = MIN_XRES; + if (var->yres < MIN_YRES) + var->yres = MIN_YRES; + if (var->xres > fbi->max_xres) + var->xres = fbi->max_xres; + if (var->yres > fbi->max_yres) + var->yres = fbi->max_yres; + var->xres_virtual = + max(var->xres_virtual, var->xres); + var->yres_virtual = + max(var->yres_virtual, var->yres); + + /* + * Setup the RGB parameters for this display. + * + * The pixel packing format is described on page 7-11 of the + * PXA2XX Developer's Manual. + */ + if (var->bits_per_pixel == 16) { + var->red.offset = 11; var->red.length = 5; + var->green.offset = 5; var->green.length = 6; + var->blue.offset = 0; var->blue.length = 5; + var->transp.offset = var->transp.length = 0; + } else { + var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.length = 0; + } + +#ifdef CONFIG_CPU_FREQ + DPRINTK("dma period = %d ps, clock = %d kHz\n", + pxafb_display_dma_period(var), + get_clk_frequency_khz(0)); +#endif + + return 0; +} + +static inline void pxafb_set_truecolor(u_int is_true_color) +{ + DPRINTK("true_color = %d\n", is_true_color); + // do your machine-specific setup if needed +} + +/* + * pxafb_set_par(): + * Set the user defined part of the display for the specified console + */ +static int pxafb_set_par(struct fb_info *info) +{ + struct pxafb_info *fbi = (struct pxafb_info *)info; + struct fb_var_screeninfo *var = &info->var; + unsigned long palette_mem_size; + + DPRINTK("set_par\n"); + + if (var->bits_per_pixel == 16) + fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; + else if (!fbi->cmap_static) + fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; + else { + /* + * Some people have weird ideas about wanting static + * pseudocolor maps. I suspect their user space + * applications are broken. + */ + fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; + } + + fbi->fb.fix.line_length = var->xres_virtual * + var->bits_per_pixel / 8; + if (var->bits_per_pixel == 16) + fbi->palette_size = 0; + else + fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel; + + palette_mem_size = fbi->palette_size * sizeof(u16); + + DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + + fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size); + fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size; + + /* + * Set (any) board control register to handle new color depth + */ + pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR); + + if (fbi->fb.var.bits_per_pixel == 16) + fb_dealloc_cmap(&fbi->fb.cmap); + else + fb_alloc_cmap(&fbi->fb.cmap, 1<fb.var.bits_per_pixel, 0); + + pxafb_activate_var(var, fbi); + + return 0; +} + +/* + * Formal definition of the VESA spec: + * On + * This refers to the state of the display when it is in full operation + * Stand-By + * This defines an optional operating state of minimal power reduction with + * the shortest recovery time + * Suspend + * This refers to a level of power management in which substantial power + * reduction is achieved by the display. The display can have a longer + * recovery time from this state than from the Stand-by state + * Off + * This indicates that the display is consuming the lowest level of power + * and is non-operational. Recovery from this state may optionally require + * the user to manually power on the monitor + * + * Now, the fbdev driver adds an additional state, (blank), where they + * turn off the video (maybe by colormap tricks), but don't mess with the + * video itself: think of it semantically between on and Stand-By. + * + * So here's what we should do in our fbdev blank routine: + * + * VESA_NO_BLANKING (mode 0) Video on, front/back light on + * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off + * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off + * VESA_POWERDOWN (mode 3) Video off, front/back light off + * + * This will match the matrox implementation. + */ + +/* + * pxafb_blank(): + * Blank the display by setting all palette values to zero. Note, the + * 16 bpp mode does not really use the palette, so this will not + * blank the display in all modes. + */ +static int pxafb_blank(int blank, struct fb_info *info) +{ + struct pxafb_info *fbi = (struct pxafb_info *)info; + int i; + + DPRINTK("pxafb_blank: blank=%d\n", blank); + + switch (blank) { + case FB_BLANK_POWERDOWN: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_NORMAL: + if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || + fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) + for (i = 0; i < fbi->palette_size; i++) + pxafb_setpalettereg(i, 0, 0, 0, 0, info); + + pxafb_schedule_work(fbi, C_DISABLE); + //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); + break; + + case FB_BLANK_UNBLANK: + //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); + if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || + fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) + fb_set_cmap(&fbi->fb.cmap, info); + pxafb_schedule_work(fbi, C_ENABLE); + } + return 0; +} + +static int pxafb_mmap(struct fb_info *info, struct file *file, + struct vm_area_struct *vma) +{ + struct pxafb_info *fbi = (struct pxafb_info *)info; + unsigned long off = vma->vm_pgoff << PAGE_SHIFT; + + if (off < info->fix.smem_len) { + vma->vm_pgoff += 1; + return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu, + fbi->map_dma, fbi->map_size); + } + return -EINVAL; +} + +static struct fb_ops pxafb_ops = { + .owner = THIS_MODULE, + .fb_check_var = pxafb_check_var, + .fb_set_par = pxafb_set_par, + .fb_setcolreg = pxafb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_blank = pxafb_blank, + .fb_cursor = soft_cursor, + .fb_mmap = pxafb_mmap, +}; + +/* + * Calculate the PCD value from the clock rate (in picoseconds). + * We take account of the PPCR clock setting. + * From PXA Developer's Manual: + * + * PixelClock = LCLK + * ------------- + * 2 ( PCD + 1 ) + * + * PCD = LCLK + * ------------- - 1 + * 2(PixelClock) + * + * Where: + * LCLK = LCD/Memory Clock + * PCD = LCCR3[7:0] + * + * PixelClock here is in Hz while the pixclock argument given is the + * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 ) + * + * The function get_lclk_frequency_10khz returns LCLK in units of + * 10khz. Calling the result of this function lclk gives us the + * following + * + * PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 ) + * -------------------------------------- - 1 + * 2 + * + * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below. + */ +static inline unsigned int get_pcd(unsigned int pixclock) +{ + unsigned long long pcd; + + /* FIXME: Need to take into account Double Pixel Clock mode + * (DPC) bit? or perhaps set it based on the various clock + * speeds */ + + pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock; + pcd /= 100000000 * 2; + /* no need for this, since we should subtract 1 anyway. they cancel */ + /* pcd += 1; */ /* make up for integer math truncations */ + return (unsigned int)pcd; +} + +/* + * pxafb_activate_var(): + * Configures LCD Controller based on entries in var parameter. Settings are + * only written to the controller if changes were made. + */ +static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *fbi) +{ + struct pxafb_lcd_reg new_regs; + u_long flags; + u_int lines_per_panel, pcd = get_pcd(var->pixclock); + + DPRINTK("Configuring PXA LCD\n"); + + DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n", + var->xres, var->hsync_len, + var->left_margin, var->right_margin); + DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n", + var->yres, var->vsync_len, + var->upper_margin, var->lower_margin); + DPRINTK("var: pixclock=%d pcd=%d\n", var->pixclock, pcd); + +#if DEBUG_VAR + if (var->xres < 16 || var->xres > 1024) + printk(KERN_ERR "%s: invalid xres %d\n", + fbi->fb.fix.id, var->xres); + switch(var->bits_per_pixel) { + case 1: + case 2: + case 4: + case 8: + case 16: + break; + default: + printk(KERN_ERR "%s: invalid bit depth %d\n", + fbi->fb.fix.id, var->bits_per_pixel); + break; + } + if (var->hsync_len < 1 || var->hsync_len > 64) + printk(KERN_ERR "%s: invalid hsync_len %d\n", + fbi->fb.fix.id, var->hsync_len); + if (var->left_margin < 1 || var->left_margin > 255) + printk(KERN_ERR "%s: invalid left_margin %d\n", + fbi->fb.fix.id, var->left_margin); + if (var->right_margin < 1 || var->right_margin > 255) + printk(KERN_ERR "%s: invalid right_margin %d\n", + fbi->fb.fix.id, var->right_margin); + if (var->yres < 1 || var->yres > 1024) + printk(KERN_ERR "%s: invalid yres %d\n", + fbi->fb.fix.id, var->yres); + if (var->vsync_len < 1 || var->vsync_len > 64) + printk(KERN_ERR "%s: invalid vsync_len %d\n", + fbi->fb.fix.id, var->vsync_len); + if (var->upper_margin < 0 || var->upper_margin > 255) + printk(KERN_ERR "%s: invalid upper_margin %d\n", + fbi->fb.fix.id, var->upper_margin); + if (var->lower_margin < 0 || var->lower_margin > 255) + printk(KERN_ERR "%s: invalid lower_margin %d\n", + fbi->fb.fix.id, var->lower_margin); +#endif + + new_regs.lccr0 = fbi->lccr0 | + (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | + LCCR0_QDM | LCCR0_BM | LCCR0_OUM); + + new_regs.lccr1 = + LCCR1_DisWdth(var->xres) + + LCCR1_HorSnchWdth(var->hsync_len) + + LCCR1_BegLnDel(var->left_margin) + + LCCR1_EndLnDel(var->right_margin); + + /* + * If we have a dual scan LCD, we need to halve + * the YRES parameter. + */ + lines_per_panel = var->yres; + if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual) + lines_per_panel /= 2; + + new_regs.lccr2 = + LCCR2_DisHght(lines_per_panel) + + LCCR2_VrtSnchWdth(var->vsync_len) + + LCCR2_BegFrmDel(var->upper_margin) + + LCCR2_EndFrmDel(var->lower_margin); + + new_regs.lccr3 = fbi->lccr3 | + pxafb_bpp_to_lccr3(var) | + (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) | + (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL); + + if (pcd) + new_regs.lccr3 |= LCCR3_PixClkDiv(pcd); + + DPRINTK("nlccr0 = 0x%08x\n", new_regs.lccr0); + DPRINTK("nlccr1 = 0x%08x\n", new_regs.lccr1); + DPRINTK("nlccr2 = 0x%08x\n", new_regs.lccr2); + DPRINTK("nlccr3 = 0x%08x\n", new_regs.lccr3); + + /* Update shadow copy atomically */ + local_irq_save(flags); + + /* setup dma descriptors */ + fbi->dmadesc_fblow_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 3*16); + fbi->dmadesc_fbhigh_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 2*16); + fbi->dmadesc_palette_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 1*16); + + fbi->dmadesc_fblow_dma = fbi->palette_dma - 3*16; + fbi->dmadesc_fbhigh_dma = fbi->palette_dma - 2*16; + fbi->dmadesc_palette_dma = fbi->palette_dma - 1*16; + +#define BYTES_PER_PANEL (lines_per_panel * fbi->fb.fix.line_length) + + /* populate descriptors */ + fbi->dmadesc_fblow_cpu->fdadr = fbi->dmadesc_fblow_dma; + fbi->dmadesc_fblow_cpu->fsadr = fbi->screen_dma + BYTES_PER_PANEL; + fbi->dmadesc_fblow_cpu->fidr = 0; + fbi->dmadesc_fblow_cpu->ldcmd = BYTES_PER_PANEL; + + fbi->fdadr1 = fbi->dmadesc_fblow_dma; /* only used in dual-panel mode */ + + fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma; + fbi->dmadesc_fbhigh_cpu->fidr = 0; + fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL; + + fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma; + fbi->dmadesc_palette_cpu->fidr = 0; + fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL; + + if (var->bits_per_pixel == 16) { + /* palette shouldn't be loaded in true-color mode */ + fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma; + fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */ + /* init it to something, even though we won't be using it */ + fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_palette_dma; + } else { + fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_fbhigh_dma; + fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_palette_dma; + fbi->fdadr0 = fbi->dmadesc_palette_dma; /* flips back and forth between pal and fbhigh */ + } + +#if 0 + DPRINTK("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu); + DPRINTK("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu); + DPRINTK("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu); + DPRINTK("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma); + DPRINTK("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma); + DPRINTK("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma); + + DPRINTK("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr); + DPRINTK("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr); + DPRINTK("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr); + + DPRINTK("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr); + DPRINTK("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr); + DPRINTK("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr); + + DPRINTK("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd); + DPRINTK("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd); + DPRINTK("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd); +#endif + + fbi->reg_lccr0 = new_regs.lccr0; + fbi->reg_lccr1 = new_regs.lccr1; + fbi->reg_lccr2 = new_regs.lccr2; + fbi->reg_lccr3 = new_regs.lccr3; + local_irq_restore(flags); + + /* + * Only update the registers if the controller is enabled + * and something has changed. + */ + if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) || + (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) || + (FDADR0 != fbi->fdadr0) || (FDADR1 != fbi->fdadr1)) + pxafb_schedule_work(fbi, C_REENABLE); + + return 0; +} + +/* + * NOTE! The following functions are purely helpers for set_ctrlr_state. + * Do not call them directly; set_ctrlr_state does the correct serialisation + * to ensure that things happen in the right way 100% of time time. + * -- rmk + */ +static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on) +{ + DPRINTK("backlight o%s\n", on ? "n" : "ff"); + + if (pxafb_backlight_power) + pxafb_backlight_power(on); +} + +static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on) +{ + DPRINTK("LCD power o%s\n", on ? "n" : "ff"); + + if (pxafb_lcd_power) + pxafb_lcd_power(on); +} + +static void pxafb_setup_gpio(struct pxafb_info *fbi) +{ + int gpio, ldd_bits; + unsigned int lccr0 = fbi->lccr0; + + /* + * setup is based on type of panel supported + */ + + /* 4 bit interface */ + if ((lccr0 & LCCR0_CMS) == LCCR0_Mono && + (lccr0 & LCCR0_SDS) == LCCR0_Sngl && + (lccr0 & LCCR0_DPD) == LCCR0_4PixMono) + ldd_bits = 4; + + /* 8 bit interface */ + else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono && + ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) || + ((lccr0 & LCCR0_CMS) == LCCR0_Color && + (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl)) + ldd_bits = 8; + + /* 16 bit interface */ + else if ((lccr0 & LCCR0_CMS) == LCCR0_Color && + ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act)) + ldd_bits = 16; + + else { + printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n"); + return; + } + + for (gpio = 58; ldd_bits; gpio++, ldd_bits--) + pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT); + pxa_gpio_mode(GPIO74_LCD_FCLK_MD); + pxa_gpio_mode(GPIO75_LCD_LCLK_MD); + pxa_gpio_mode(GPIO76_LCD_PCLK_MD); + pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD); +} + +static void pxafb_enable_controller(struct pxafb_info *fbi) +{ + DPRINTK("Enabling LCD controller\n"); + DPRINTK("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0); + DPRINTK("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1); + DPRINTK("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0); + DPRINTK("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1); + DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2); + DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3); + + /* Sequence from 11.7.10 */ + LCCR3 = fbi->reg_lccr3; + LCCR2 = fbi->reg_lccr2; + LCCR1 = fbi->reg_lccr1; + LCCR0 = fbi->reg_lccr0 & ~LCCR0_ENB; + + FDADR0 = fbi->fdadr0; + FDADR1 = fbi->fdadr1; + LCCR0 |= LCCR0_ENB; + + DPRINTK("FDADR0 0x%08x\n", (unsigned int) FDADR0); + DPRINTK("FDADR1 0x%08x\n", (unsigned int) FDADR1); + DPRINTK("LCCR0 0x%08x\n", (unsigned int) LCCR0); + DPRINTK("LCCR1 0x%08x\n", (unsigned int) LCCR1); + DPRINTK("LCCR2 0x%08x\n", (unsigned int) LCCR2); + DPRINTK("LCCR3 0x%08x\n", (unsigned int) LCCR3); +} + +static void pxafb_disable_controller(struct pxafb_info *fbi) +{ + DECLARE_WAITQUEUE(wait, current); + + DPRINTK("Disabling LCD controller\n"); + + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&fbi->ctrlr_wait, &wait); + + LCSR = 0xffffffff; /* Clear LCD Status Register */ + LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ + LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */ + + schedule_timeout(20 * HZ / 1000); + remove_wait_queue(&fbi->ctrlr_wait, &wait); +} + +/* + * pxafb_handle_irq: Handle 'LCD DONE' interrupts. + */ +static irqreturn_t pxafb_handle_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct pxafb_info *fbi = dev_id; + unsigned int lcsr = LCSR; + + if (lcsr & LCSR_LDD) { + LCCR0 |= LCCR0_LDM; + wake_up(&fbi->ctrlr_wait); + } + + LCSR = lcsr; + return IRQ_HANDLED; +} + +/* + * This function must be called from task context only, since it will + * sleep when disabling the LCD controller, or if we get two contending + * processes trying to alter state. + */ +static void set_ctrlr_state(struct pxafb_info *fbi, u_int state) +{ + u_int old_state; + + down(&fbi->ctrlr_sem); + + old_state = fbi->state; + + /* + * Hack around fbcon initialisation. + */ + if (old_state == C_STARTUP && state == C_REENABLE) + state = C_ENABLE; + + switch (state) { + case C_DISABLE_CLKCHANGE: + /* + * Disable controller for clock change. If the + * controller is already disabled, then do nothing. + */ + if (old_state != C_DISABLE && old_state != C_DISABLE_PM) { + fbi->state = state; + //TODO __pxafb_lcd_power(fbi, 0); + pxafb_disable_controller(fbi); + } + break; + + case C_DISABLE_PM: + case C_DISABLE: + /* + * Disable controller + */ + if (old_state != C_DISABLE) { + fbi->state = state; + __pxafb_backlight_power(fbi, 0); + __pxafb_lcd_power(fbi, 0); + if (old_state != C_DISABLE_CLKCHANGE) + pxafb_disable_controller(fbi); + } + break; + + case C_ENABLE_CLKCHANGE: + /* + * Enable the controller after clock change. Only + * do this if we were disabled for the clock change. + */ + if (old_state == C_DISABLE_CLKCHANGE) { + fbi->state = C_ENABLE; + pxafb_enable_controller(fbi); + //TODO __pxafb_lcd_power(fbi, 1); + } + break; + + case C_REENABLE: + /* + * Re-enable the controller only if it was already + * enabled. This is so we reprogram the control + * registers. + */ + if (old_state == C_ENABLE) { + pxafb_disable_controller(fbi); + pxafb_setup_gpio(fbi); + pxafb_enable_controller(fbi); + } + break; + + case C_ENABLE_PM: + /* + * Re-enable the controller after PM. This is not + * perfect - think about the case where we were doing + * a clock change, and we suspended half-way through. + */ + if (old_state != C_DISABLE_PM) + break; + /* fall through */ + + case C_ENABLE: + /* + * Power up the LCD screen, enable controller, and + * turn on the backlight. + */ + if (old_state != C_ENABLE) { + fbi->state = C_ENABLE; + pxafb_setup_gpio(fbi); + pxafb_enable_controller(fbi); + __pxafb_lcd_power(fbi, 1); + __pxafb_backlight_power(fbi, 1); + } + break; + } + up(&fbi->ctrlr_sem); +} + +/* + * Our LCD controller task (which is called when we blank or unblank) + * via keventd. + */ +static void pxafb_task(void *dummy) +{ + struct pxafb_info *fbi = dummy; + u_int state = xchg(&fbi->task_state, -1); + + set_ctrlr_state(fbi, state); +} + +#ifdef CONFIG_CPU_FREQ +/* + * CPU clock speed change handler. We need to adjust the LCD timing + * parameters when the CPU clock is adjusted by the power management + * subsystem. + * + * TODO: Determine why f->new != 10*get_lclk_frequency_10khz() + */ +static int +pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data) +{ + struct pxafb_info *fbi = TO_INF(nb, freq_transition); + //TODO struct cpufreq_freqs *f = data; + u_int pcd; + + switch (val) { + case CPUFREQ_PRECHANGE: + set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE); + break; + + case CPUFREQ_POSTCHANGE: + pcd = get_pcd(fbi->fb.var.pixclock); + fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); + set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE); + break; + } + return 0; +} + +static int +pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data) +{ + struct pxafb_info *fbi = TO_INF(nb, freq_policy); + struct fb_var_screeninfo *var = &fbi->fb.var; + struct cpufreq_policy *policy = data; + + switch (val) { + case CPUFREQ_ADJUST: + case CPUFREQ_INCOMPATIBLE: + printk(KERN_DEBUG "min dma period: %d ps, " + "new clock %d kHz\n", pxafb_display_dma_period(var), + policy->max); + // TODO: fill in min/max values + break; +#if 0 + case CPUFREQ_NOTIFY: + printk(KERN_ERR "%s: got CPUFREQ_NOTIFY\n", __FUNCTION__); + do {} while(0); + /* todo: panic if min/max values aren't fulfilled + * [can't really happen unless there's a bug in the + * CPU policy verification process * + */ + break; +#endif + } + return 0; +} +#endif + +#ifdef CONFIG_PM +/* + * Power management hooks. Note that we won't be called from IRQ context, + * unlike the blank functions above, so we may sleep. + */ +static int pxafb_suspend(struct device *dev, u32 state, u32 level) +{ + struct pxafb_info *fbi = dev_get_drvdata(dev); + + if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) + set_ctrlr_state(fbi, C_DISABLE_PM); + return 0; +} + +static int pxafb_resume(struct device *dev, u32 level) +{ + struct pxafb_info *fbi = dev_get_drvdata(dev); + + if (level == RESUME_ENABLE) + set_ctrlr_state(fbi, C_ENABLE_PM); + return 0; +} +#else +#define pxafb_suspend NULL +#define pxafb_resume NULL +#endif + +/* + * pxafb_map_video_memory(): + * Allocates the DRAM memory for the frame buffer. This buffer is + * remapped into a non-cached, non-buffered, memory region to + * allow palette and pixel writes to occur without flushing the + * cache. Once this area is remapped, all virtual memory + * access to the video memory should occur at the new region. + */ +static int __init pxafb_map_video_memory(struct pxafb_info *fbi) +{ + u_long palette_mem_size; + + /* + * We reserve one page for the palette, plus the size + * of the framebuffer. + */ + fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); + fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size, + &fbi->map_dma, GFP_KERNEL); + + if (fbi->map_cpu) { + /* prevent initial garbage on screen */ + memset(fbi->map_cpu, 0, fbi->map_size); + fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE; + fbi->screen_dma = fbi->map_dma + PAGE_SIZE; + /* + * FIXME: this is actually the wrong thing to place in + * smem_start. But fbdev suffers from the problem that + * it needs an API which doesn't exist (in this case, + * dma_writecombine_mmap) + */ + fbi->fb.fix.smem_start = fbi->screen_dma; + + fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16; + + palette_mem_size = fbi->palette_size * sizeof(u16); + DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + + fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size); + fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size; + } + + return fbi->map_cpu ? 0 : -ENOMEM; +} + +static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) +{ + struct pxafb_info *fbi; + void *addr; + struct pxafb_mach_info *inf = dev->platform_data; + + /* Alloc the pxafb_info and pseudo_palette in one step */ + fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL); + if (!fbi) + return NULL; + + memset(fbi, 0, sizeof(struct pxafb_info)); + fbi->dev = dev; + + strcpy(fbi->fb.fix.id, PXA_NAME); + + fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; + fbi->fb.fix.type_aux = 0; + fbi->fb.fix.xpanstep = 0; + fbi->fb.fix.ypanstep = 0; + fbi->fb.fix.ywrapstep = 0; + fbi->fb.fix.accel = FB_ACCEL_NONE; + + fbi->fb.var.nonstd = 0; + fbi->fb.var.activate = FB_ACTIVATE_NOW; + fbi->fb.var.height = -1; + fbi->fb.var.width = -1; + fbi->fb.var.accel_flags = 0; + fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; + + fbi->fb.fbops = &pxafb_ops; + fbi->fb.flags = FBINFO_DEFAULT; + fbi->fb.node = -1; + + addr = fbi; + addr = addr + sizeof(struct pxafb_info); + fbi->fb.pseudo_palette = addr; + + fbi->max_xres = inf->xres; + fbi->fb.var.xres = inf->xres; + fbi->fb.var.xres_virtual = inf->xres; + fbi->max_yres = inf->yres; + fbi->fb.var.yres = inf->yres; + fbi->fb.var.yres_virtual = inf->yres; + fbi->max_bpp = inf->bpp; + fbi->fb.var.bits_per_pixel = inf->bpp; + fbi->fb.var.pixclock = inf->pixclock; + fbi->fb.var.hsync_len = inf->hsync_len; + fbi->fb.var.left_margin = inf->left_margin; + fbi->fb.var.right_margin = inf->right_margin; + fbi->fb.var.vsync_len = inf->vsync_len; + fbi->fb.var.upper_margin = inf->upper_margin; + fbi->fb.var.lower_margin = inf->lower_margin; + fbi->fb.var.sync = inf->sync; + fbi->fb.var.grayscale = inf->cmap_greyscale; + fbi->cmap_inverse = inf->cmap_inverse; + fbi->cmap_static = inf->cmap_static; + fbi->lccr0 = inf->lccr0; + fbi->lccr3 = inf->lccr3; + fbi->state = C_STARTUP; + fbi->task_state = (u_char)-1; + fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres * + fbi->max_bpp / 8; + + init_waitqueue_head(&fbi->ctrlr_wait); + INIT_WORK(&fbi->task, pxafb_task, fbi); + init_MUTEX(&fbi->ctrlr_sem); + + return fbi; +} + +#ifdef CONFIG_FB_PXA_PARAMETERS +static int __init pxafb_parse_options(struct device *dev, char *options) +{ + struct pxafb_mach_info *inf = dev->platform_data; + char *this_opt; + + if (!options || !*options) + return 0; + + dev_dbg(dev, "options are \"%s\"\n", options ? options : "null"); + + /* could be made table driven or similar?... */ + while ((this_opt = strsep(&options, ",")) != NULL) { + if (!strncmp(this_opt, "mode:", 5)) { + const char *name = this_opt+5; + unsigned int namelen = strlen(name); + int res_specified = 0, bpp_specified = 0; + unsigned int xres = 0, yres = 0, bpp = 0; + int yres_specified = 0; + int i; + for (i = namelen-1; i >= 0; i--) { + switch (name[i]) { + case '-': + namelen = i; + if (!bpp_specified && !yres_specified) { + bpp = simple_strtoul(&name[i+1], NULL, 0); + bpp_specified = 1; + } else + goto done; + break; + case 'x': + if (!yres_specified) { + yres = simple_strtoul(&name[i+1], NULL, 0); + yres_specified = 1; + } else + goto done; + break; + case '0'...'9': + break; + default: + goto done; + } + } + if (i < 0 && yres_specified) { + xres = simple_strtoul(name, NULL, 0); + res_specified = 1; + } + done: + if (res_specified) { + dev_info(dev, "overriding resolution: %dx%d\n", xres, yres); + inf->xres = xres; inf->yres = yres; + } + if (bpp_specified) + switch (bpp) { + case 1: + case 2: + case 4: + case 8: + case 16: + inf->bpp = bpp; + dev_info(dev, "overriding bit depth: %d\n", bpp); + break; + default: + dev_err(dev, "Depth %d is not valid\n", bpp); + } + } else if (!strncmp(this_opt, "pixclock:", 9)) { + inf->pixclock = simple_strtoul(this_opt+9, NULL, 0); + dev_info(dev, "override pixclock: %ld\n", inf->pixclock); + } else if (!strncmp(this_opt, "left:", 5)) { + inf->left_margin = simple_strtoul(this_opt+5, NULL, 0); + dev_info(dev, "override left: %u\n", inf->left_margin); + } else if (!strncmp(this_opt, "right:", 6)) { + inf->right_margin = simple_strtoul(this_opt+6, NULL, 0); + dev_info(dev, "override right: %u\n", inf->right_margin); + } else if (!strncmp(this_opt, "upper:", 6)) { + inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0); + dev_info(dev, "override upper: %u\n", inf->upper_margin); + } else if (!strncmp(this_opt, "lower:", 6)) { + inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0); + dev_info(dev, "override lower: %u\n", inf->lower_margin); + } else if (!strncmp(this_opt, "hsynclen:", 9)) { + inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0); + dev_info(dev, "override hsynclen: %u\n", inf->hsync_len); + } else if (!strncmp(this_opt, "vsynclen:", 9)) { + inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0); + dev_info(dev, "override vsynclen: %u\n", inf->vsync_len); + } else if (!strncmp(this_opt, "hsync:", 6)) { + if (simple_strtoul(this_opt+6, NULL, 0) == 0) { + dev_info(dev, "override hsync: Active Low\n"); + inf->sync &= ~FB_SYNC_HOR_HIGH_ACT; + } else { + dev_info(dev, "override hsync: Active High\n"); + inf->sync |= FB_SYNC_HOR_HIGH_ACT; + } + } else if (!strncmp(this_opt, "vsync:", 6)) { + if (simple_strtoul(this_opt+6, NULL, 0) == 0) { + dev_info(dev, "override vsync: Active Low\n"); + inf->sync &= ~FB_SYNC_VERT_HIGH_ACT; + } else { + dev_info(dev, "override vsync: Active High\n"); + inf->sync |= FB_SYNC_VERT_HIGH_ACT; + } + } else if (!strncmp(this_opt, "dpc:", 4)) { + if (simple_strtoul(this_opt+4, NULL, 0) == 0) { + dev_info(dev, "override double pixel clock: false\n"); + inf->lccr3 &= ~LCCR3_DPC; + } else { + dev_info(dev, "override double pixel clock: true\n"); + inf->lccr3 |= LCCR3_DPC; + } + } else if (!strncmp(this_opt, "outputen:", 9)) { + if (simple_strtoul(this_opt+9, NULL, 0) == 0) { + dev_info(dev, "override output enable: active low\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL; + } else { + dev_info(dev, "override output enable: active high\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH; + } + } else if (!strncmp(this_opt, "pixclockpol:", 12)) { + if (simple_strtoul(this_opt+12, NULL, 0) == 0) { + dev_info(dev, "override pixel clock polarity: falling edge\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg; + } else { + dev_info(dev, "override pixel clock polarity: rising edge\n"); + inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg; + } + } else if (!strncmp(this_opt, "color", 5)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color; + } else if (!strncmp(this_opt, "mono", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono; + } else if (!strncmp(this_opt, "active", 6)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act; + } else if (!strncmp(this_opt, "passive", 7)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas; + } else if (!strncmp(this_opt, "single", 6)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl; + } else if (!strncmp(this_opt, "dual", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual; + } else if (!strncmp(this_opt, "4pix", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono; + } else if (!strncmp(this_opt, "8pix", 4)) { + inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono; + } else { + dev_err(dev, "unknown option: %s\n", this_opt); + return -EINVAL; + } + } + return 0; + +} +#endif + +int __init pxafb_probe(struct device *dev) +{ + struct pxafb_info *fbi; + struct pxafb_mach_info *inf; + int ret; + + dev_dbg(dev, "pxafb_probe\n"); + + inf = dev->platform_data; + ret = -ENOMEM; + fbi = NULL; + if (!inf) + goto failed; + +#ifdef CONFIG_FB_PXA_PARAMETERS + ret = pxafb_parse_options(dev, g_options); + if (ret < 0) + goto failed; +#endif + +#ifdef DEBUG_VAR + /* Check for various illegal bit-combinations. Currently only + * a warning is given. */ + + if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK) + dev_warn(dev, "machine LCCR0 setting contains illegal bits: %08x\n", + inf->lccr0 & LCCR0_INVALID_CONFIG_MASK); + if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK) + dev_warn(dev, "machine LCCR3 setting contains illegal bits: %08x\n", + inf->lccr3 & LCCR3_INVALID_CONFIG_MASK); + if (inf->lccr0 & LCCR0_DPD && + ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas || + (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl || + (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono)) + dev_warn(dev, "Double Pixel Data (DPD) mode is only valid in passive mono" + " single panel mode\n"); + if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act && + (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual) + dev_warn(dev, "Dual panel only valid in passive mode\n"); + if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas && + (inf->upper_margin || inf->lower_margin)) + dev_warn(dev, "Upper and lower margins must be 0 in passive mode\n"); +#endif + + dev_dbg(dev, "got a %dx%dx%d LCD\n",inf->xres, inf->yres, inf->bpp); + if (inf->xres == 0 || inf->yres == 0 || inf->bpp == 0) { + dev_err(dev, "Invalid resolution or bit depth\n"); + ret = -EINVAL; + goto failed; + } + pxafb_backlight_power = inf->pxafb_backlight_power; + pxafb_lcd_power = inf->pxafb_lcd_power; + fbi = pxafb_init_fbinfo(dev); + if (!fbi) { + dev_err(dev, "Failed to initialize framebuffer device\n"); + ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc + goto failed; + } + + /* Initialize video memory */ + ret = pxafb_map_video_memory(fbi); + if (ret) { + dev_err(dev, "Failed to allocate video RAM: %d\n", ret); + ret = -ENOMEM; + goto failed; + } + /* enable LCD controller clock */ + pxa_set_cken(CKEN16_LCD, 1); + + ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi); + if (ret) { + dev_err(dev, "request_irq failed: %d\n", ret); + ret = -EBUSY; + goto failed; + } + + /* + * This makes sure that our colour bitfield + * descriptors are correctly initialised. + */ + pxafb_check_var(&fbi->fb.var, &fbi->fb); + pxafb_set_par(&fbi->fb); + + dev_set_drvdata(dev, fbi); + + ret = register_framebuffer(&fbi->fb); + if (ret < 0) { + dev_err(dev, "Failed to register framebuffer device: %d\n", ret); + goto failed; + } + +#ifdef CONFIG_PM + // TODO +#endif + +#ifdef CONFIG_CPU_FREQ + fbi->freq_transition.notifier_call = pxafb_freq_transition; + fbi->freq_policy.notifier_call = pxafb_freq_policy; + cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); + cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER); +#endif + + /* + * Ok, now enable the LCD controller + */ + set_ctrlr_state(fbi, C_ENABLE); + + return 0; + +failed: + dev_set_drvdata(dev, NULL); + kfree(fbi); + return ret; +} + +static struct device_driver pxafb_driver = { + .name = "pxa2xx-fb", + .bus = &platform_bus_type, + .probe = pxafb_probe, +#ifdef CONFIG_PM + .suspend = pxafb_suspend, + .resume = pxafb_resume, +#endif +}; + +#ifndef MODULE +int __devinit pxafb_setup(char *options) +{ +# ifdef CONFIG_FB_PXA_PARAMETERS + strlcpy(g_options, options, sizeof(g_options)); +# endif + return 0; +} +#else +# ifdef CONFIG_FB_PXA_PARAMETERS +module_param_string(options, g_options, sizeof(g_options), 0); +MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)"); +# endif +#endif + +int __devinit pxafb_init(void) +{ +#ifndef MODULE + char *option = NULL; + + if (fb_get_options("pxafb", &option)) + return -ENODEV; + pxafb_setup(option); +#endif + return driver_register(&pxafb_driver); +} + +module_init(pxafb_init); + +MODULE_DESCRIPTION("loadable framebuffer driver for PXA"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3