From 2d3b8eea7f2fbafd5d779cc92f7aedbd1ef575e9 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Thu, 15 Nov 2007 10:35:46 +0900 Subject: libata: workaround DRQ=1 ERR=1 for ATAPI tape drives After an error condition, some ATAPI tape drives set DRQ=1 together with ERR=1 when asking the host to transfer the CDB of the next packet command (i.e. request sense). This patch, a revised version of Alan/Mark's previous patch, adds ATA_HORKAGE_STUCK_ERR to workaround the problem by ignoring the ERR bit and proceed sending the CDB. Signed-off-by: Albert Lee Cc: Alan Cox Cc: Mark Lord Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1584164e770..5478b4c6c6e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5415,11 +5415,19 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device " - "error, dev_stat 0x%X\n", status); - qc->err_mask |= AC_ERR_HSM; - ap->hsm_task_state = HSM_ST_ERR; - goto fsm_start; + /* Some ATAPI tape drives forget to clear the ERR bit + * when doing the next command (mostly request sense). + * We ignore ERR here to workaround and proceed sending + * the CDB. + */ + if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { + ata_port_printk(ap, KERN_WARNING, + "DRQ=1 with device error, " + "dev_stat 0x%X\n", status); + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } } /* Send the CDB (atapi) or the first data block (ata pio out). -- cgit v1.2.3