From e000ea13123a28108cff2d6b9856b414dfdcd1fa Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 2 Sep 2008 11:34:24 -0700 Subject: net/usb/pegasus: avoid hundreds of diagnostics Make the "pegasus" driver scream less loudly in the face of problems as it initializes, avoiding hundreds of messages: - ratelimit some key error messages - avoid some spurious diagnostics caused by strange codeflow And fix one instance of goofy indentation. Signed-off-by: David Brownell Signed-off-by: Jeff Garzik --- drivers/net/usb/pegasus.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index a84ba487c71..8c19307e504 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -117,7 +117,7 @@ static void ctrl_callback(struct urb *urb) case -ENOENT: break; default: - if (netif_msg_drv(pegasus)) + if (netif_msg_drv(pegasus) && printk_ratelimit()) dev_dbg(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, urb->status); } @@ -166,7 +166,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size, set_current_state(TASK_RUNNING); if (ret == -ENODEV) netif_device_detach(pegasus->net); - if (netif_msg_drv(pegasus)) + if (netif_msg_drv(pegasus) && printk_ratelimit()) dev_err(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, ret); goto out; @@ -275,7 +275,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data) if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) { if (ret == -ENODEV) netif_device_detach(pegasus->net); - if (netif_msg_drv(pegasus)) + if (netif_msg_drv(pegasus) && printk_ratelimit()) dev_err(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, ret); goto out; @@ -1209,8 +1209,7 @@ static void pegasus_set_multicast(struct net_device *net) pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS; if (netif_msg_link(pegasus)) pr_info("%s: Promiscuous mode enabled.\n", net->name); - } else if (net->mc_count || - (net->flags & IFF_ALLMULTI)) { + } else if (net->mc_count || (net->flags & IFF_ALLMULTI)) { pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST; pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS; if (netif_msg_link(pegasus)) @@ -1220,6 +1219,8 @@ static void pegasus_set_multicast(struct net_device *net) pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS; } + pegasus->ctrl_urb->status = 0; + pegasus->flags |= ETH_REGS_CHANGE; ctrl_callback(pegasus->ctrl_urb); } -- cgit v1.2.3 From 15e79f24b60c4b0bf8019423bda4e03a576b02f2 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Wed, 27 Aug 2008 18:04:32 -0700 Subject: ixgbe: initialize interrupt throttle rate This commit dropped the setting of the default interrupt throttle rate. commit 021230d40ae0e6508d6c717b6e0d6d81cd77ac25 Author: Ayyappan Veeraiyan Date: Mon Mar 3 15:03:45 2008 -0800 ixgbe: Introduce MSI-X queue vector code The following patch adds it back. Without this the default value of 0 causes the performance of this card to be awful. Restoring these to the default values yields much better performance. This regression has been around since 2.6.25. Signed-off-by: Andy Gospodarek Acked-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher CC: stable@kernel.org [2.6.25 and later] Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 53f41b649f0..a417be7f8be 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2303,6 +2303,12 @@ static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter int err = 0; int vector, v_budget; + /* + * Set the default interrupt throttle rate. + */ + adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS); + adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS); + /* * It's easy to be greedy for MSI-X vectors, but it really * doesn't do us much good if we have a lot more vectors -- cgit v1.2.3 From 2dcc9ff7efc701f76883356bdbaf1134039e5fa5 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sat, 30 Aug 2008 12:13:33 +0900 Subject: pcnet-cs, axnet_cs: add new IDs, remove dup ID with less info pcnet_cs: add new ID: "corega Ether PCC-TD". remove duplicate ID: "IC-CARD". axnet_cs: add new ID: "IO DATA ETXPCM". Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/axnet_cs.c | 1 + drivers/net/pcmcia/pcnet_cs.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 3f682d49a4e..52bf11b73c6 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -784,6 +784,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e), PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 2d4c4ad89b8..ebc1ae6bcbe 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1626,6 +1626,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), + PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2), PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2), @@ -1737,7 +1738,6 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360), PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de), PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f), - PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6), PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a), PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078), /* too generic! */ -- cgit v1.2.3 From 0b62afb432d807482a6808508112d1baf29f3798 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 27 Aug 2008 21:57:30 -0700 Subject: netxen: Remove workaround for chipset quirk Remove chipset-specific quirk workaround; the workaround caused unrecoverable DMA lockups when the driver was loaded following a PXE boot. Signed-off-by: Dhananjay Phadke Signed-off-by: Michael Brown Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_main.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 32bb47adbe3..008fd6618a5 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -359,16 +359,6 @@ static void netxen_pcie_strap_init(struct netxen_adapter *adapter) int i, pos; struct pci_dev *pdev; - pdev = pci_get_device(0x1166, 0x0140, NULL); - if (pdev) { - pci_dev_put(pdev); - adapter->hw_read_wx(adapter, - NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4); - chicken |= 0x4000; - adapter->hw_write_wx(adapter, - NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4); - } - pdev = adapter->pdev; adapter->hw_read_wx(adapter, -- cgit v1.2.3 From b94d8eea44df985ea22b1f51e402b4bbfdd6d793 Mon Sep 17 00:00:00 2001 From: Assaf Krauss Date: Wed, 3 Sep 2008 11:18:42 +0800 Subject: iwlwifi: W/A for the TSF correction in IBSS This patch is a W/A for the TSF sync issue in IBSS merging. HW is not capable to sync TSF (it's constantly little behind). This creates constant IBSS merging upon reception of each beacon, adding and removing station which in turn creates above 50% packet loss and thus dramatically degrade the throughput. The W/A simply stops the driver from declaring it has a reliable TSF value and thus eliminates IBSS merging. Signed-off-by: Assaf Krauss Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- drivers/net/wireless/iwlwifi/iwl-rx.c | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index c0b73c4d6f4..2afa1fb052e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3588,7 +3588,7 @@ static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk priv->assoc_id = 0; timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; - priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000); + priv->timestamp = le64_to_cpu(timestamp); IWL_DEBUG_MAC80211("leave\n"); spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index f3f6ea49fdd..e81bfc42a7c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -1173,7 +1173,10 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, rx_status.antenna = 0; rx_status.flag = 0; - rx_status.flag |= RX_FLAG_TSFT; + + /* TSF isn't reliable. In order to allow smooth user experience, + * this W/A doesn't propagate it to the mac80211 */ + /*rx_status.flag |= RX_FLAG_TSFT;*/ if ((unlikely(rx_start->cfg_phy_cnt > 20))) { IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n", -- cgit v1.2.3 From 0ffe014a8c548f88694815ae7b25d6e86550917e Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Wed, 3 Sep 2008 11:18:43 +0800 Subject: iwlwifi: fix hidden ssid discovery in passive channels This enables sending of direct probes on passive channels, as long as traffic was detected on that channel. This enables connectivity to hidden/non broadcasting SSIDs APs on passive channels. Note 5000 HW declares all 5.2 spectrum as passive. Signed-off-by: Cahill Ben Signed-off-by: Tomas Winkler Signed-off-by: Ron Rindjunsky Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 9bb6adb28b7..6c8ac3a87d5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -421,7 +421,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, else scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes) + if (n_probes) scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); scan_ch->active_dwell = cpu_to_le16(active_dwell); -- cgit v1.2.3 From 545597036caefd4b438731abaca902efe004b1b4 Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Wed, 3 Sep 2008 11:18:44 +0800 Subject: iwlwifi: remove false rxon if rx chain changes Rx chain might change during power save transitions but it doesn't require sending Full-ROXN command to the firmware. Full-RXON requires reconnection to an AP and thus affects user experience. The patch avoids the Full-RXON by removing the rx_chain modification check in iwl_full_rxon_required function. Signed-off-by: Mohamed Abbas Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 2afa1fb052e..a5feb0cc982 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -181,14 +181,14 @@ static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon) } /** - * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed + * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed * @priv: staging_rxon is compared to active_rxon * * If the RXON structure is changing enough to require a new tune, * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. */ -static int iwl4965_full_rxon_required(struct iwl_priv *priv) +static int iwl_full_rxon_required(struct iwl_priv *priv) { /* These items are only settable from the full RXON command */ @@ -207,7 +207,6 @@ static int iwl4965_full_rxon_required(struct iwl_priv *priv) priv->active_rxon.ofdm_ht_single_stream_basic_rates) || (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || - (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) || (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) return 1; @@ -263,7 +262,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) /* If we don't need to send a full RXON, we can use * iwl4965_rxon_assoc_cmd which is used to reconfigure filter * and other flags for the current radio configuration. */ - if (!iwl4965_full_rxon_required(priv)) { + if (!iwl_full_rxon_required(priv)) { ret = iwl_send_rxon_assoc(priv); if (ret) { IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret); -- cgit v1.2.3 From 4834c73f055b92f719a23e29e275559fa8c29513 Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Wed, 3 Sep 2008 11:18:46 +0800 Subject: iwlwifi: fix station mimo power save values This patch fixes the wrong use MIMO power save values. Our TX was configured with our MIMO power save values instead of peer's MIMO power save values, this may affect connectivity. The peer STA/AP may not sense our traffic at all as it doesn't have all RX chains opened. Signed-off-by: Ron Rindjunsky Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 3 ++- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 -- drivers/net/wireless/iwlwifi/iwl-dev.h | 1 - 3 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 754fef5b592..90a2b6dee7c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -1153,7 +1153,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, !sta->ht_info.ht_supported) return -1; - if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) + if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2) + == IWL_MIMO_PS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index a5feb0cc982..34928c8ed20 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -586,8 +586,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, iwl_conf->supported_chan_width = 0; } - iwl_conf->tx_mimo_ps_mode = - (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); iwl_conf->control_channel = ht_bss_conf->primary_channel; diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index c19db438306..cdfb343c7ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -412,7 +412,6 @@ struct iwl_ht_info { /* self configuration data */ u8 is_ht; u8 supported_chan_width; - u16 tx_mimo_ps_mode; u8 is_green_field; u8 sgf; /* HT_SHORT_GI_* short guard interval */ u8 max_amsdu_size; -- cgit v1.2.3 From 28a6b07a14bd5e63af2c0304306f35c5b963910b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 3 Sep 2008 11:18:47 +0800 Subject: iwlwifi: fix rx_chain computation This patch fixes rx_chain computation. The code that adjusts number of rx chains to number supported by HW was missing. Miss configuration causes firmware error. Note: iwlwifi supports HW with up to 3 RX chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the whole RX chain computation. Signed-off-by: Tomas Winkler Signed-off-by: Mohamed Abbas Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 77 ++++++++++++++++++++------------- 1 file changed, 46 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index c72f72579be..80f2f84defa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -592,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv) clear_bit(STATUS_GEO_CONFIGURED, &priv->status); } -static u8 is_single_rx_stream(struct iwl_priv *priv) +static bool is_single_rx_stream(struct iwl_priv *priv) { return !priv->current_ht_config.is_ht || ((priv->current_ht_config.supp_mcs_set[1] == 0) && - (priv->current_ht_config.supp_mcs_set[2] == 0)) || - priv->ps_mode == IWL_MIMO_PS_STATIC; + (priv->current_ht_config.supp_mcs_set[2] == 0)); } static u8 iwl_is_channel_extension(struct iwl_priv *priv, @@ -704,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht); * MIMO (dual stream) requires at least 2, but works better with 3. * This does not determine *which* chains to use, just how many. */ -static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, - u8 *idle_state, u8 *rx_state) +static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # of Rx chains to use when expecting MIMO. */ if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) - *rx_state = 2; + return 2; else - *rx_state = 3; + return 3; +} +static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + int idle_cnt; + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # Rx chains when idling and maybe trying to save power */ switch (priv->ps_mode) { case IWL_MIMO_PS_STATIC: case IWL_MIMO_PS_DYNAMIC: - *idle_state = (is_cam) ? 2 : 1; + idle_cnt = (is_cam) ? 2 : 1; break; case IWL_MIMO_PS_NONE: - *idle_state = (is_cam) ? *rx_state : 1; + idle_cnt = (is_cam) ? active_cnt : 1; break; + case IWL_MIMO_PS_INVALID: default: - *idle_state = 1; + IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode); + WARN_ON(1); + idle_cnt = -1; break; } - - return 0; + return idle_cnt; } /** @@ -741,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, */ void iwl_set_rxon_chain(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 idle_state, rx_state; - - priv->staging_rxon.rx_chain = 0; - rx_state = idle_state = 3; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt; + u16 rx_chain; /* Tell uCode which antennas are actually connected. * Before first association, we assume all antennas are connected. * Just after first association, iwl_chain_noise_calibration() * checks which antennas actually *are* connected. */ - priv->staging_rxon.rx_chain |= - cpu_to_le16(priv->hw_params.valid_rx_ant << - RXON_RX_CHAIN_VALID_POS); + rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; /* How many receivers should we use? */ - iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state); - priv->staging_rxon.rx_chain |= - cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); - priv->staging_rxon.rx_chain |= - cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); - - if (!is_single && (rx_state >= 2) && - !test_bit(STATUS_POWER_PMI, &priv->status)) + active_rx_cnt = iwl_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); + + /* correct rx chain count accoridng hw settings */ + if (priv->hw_params.rx_chains_num < active_rx_cnt) + active_rx_cnt = priv->hw_params.rx_chains_num; + + if (priv->hw_params.rx_chains_num < idle_rx_cnt) + idle_rx_cnt = priv->hw_params.rx_chains_num; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= 2) && is_cam) priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; else priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); + IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n", + priv->staging_rxon.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); } EXPORT_SYMBOL(iwl_set_rxon_chain); -- cgit v1.2.3 From 73b7d742519ab4cc1b7a12c7af15187fc0ede8e7 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 3 Sep 2008 11:18:48 +0800 Subject: iwlwifi: fix Tx cmd memory allocation failure handling This patch "iwlwifi: do not use GFP_DMA in iwl_tx_queue_init" removes GFP_DMA from allocation tx command buffers. GFP_DMA allows allocation only for memory under 16M which causes allocation problems suspend/resume flows. Using kmalloc is temporal solution and some consistent/coherent allocation schema will be more correct. Since iwlwifi hardware supports 64bit address this solution should work on x86 (32 and 64bit) for now. This patch fixes memory freeing problem in the previous patch. Signed-off-by: Tomas Winkler Signed-off-by: Ian Schram Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index ff879d46624..78b1a7a4ca4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -402,12 +402,11 @@ static int iwl_hw_tx_queue_init(struct iwl_priv *priv, /** * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue */ -static int iwl_tx_queue_init(struct iwl_priv *priv, - struct iwl_tx_queue *txq, +static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { int i, len; - int rc = 0; + int ret; /* * Alloc buffer array for commands (Tx or other types of commands). @@ -428,17 +427,14 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, txq->cmd[i] = kmalloc(len, GFP_KERNEL); if (!txq->cmd[i]) - return -ENOMEM; + goto err; } /* Alloc driver data array and TFD circular buffer */ - rc = iwl_tx_queue_alloc(priv, txq, txq_id); - if (rc) { - for (i = 0; i < slots_num; i++) - kfree(txq->cmd[i]); + ret = iwl_tx_queue_alloc(priv, txq, txq_id); + if (ret) + goto err; - return -ENOMEM; - } txq->need_update = 0; /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise @@ -452,6 +448,17 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, iwl_hw_tx_queue_init(priv, txq); return 0; +err: + for (i = 0; i < slots_num; i++) { + kfree(txq->cmd[i]); + txq->cmd[i] = NULL; + } + + if (txq_id == IWL_CMD_QUEUE_NUM) { + kfree(txq->cmd[slots_num]); + txq->cmd[slots_num] = NULL; + } + return -ENOMEM; } /** * iwl_hw_txq_ctx_free - Free TXQ Context -- cgit v1.2.3 From d535311ecbba0d692b5f1278b8bcb2581c3482e0 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Wed, 3 Sep 2008 11:18:49 +0800 Subject: iwlwifi: call apm stop on exit This patch calls apm stop on exit and suspend. Without this patch hardware consumes power even after driver is removed or suspended. Signed-off-by: Gregory Greenman Signed-off-by: Mohamed Abbas Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 34928c8ed20..4e3d6c7fd6d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2187,7 +2187,10 @@ static void __iwl4965_down(struct iwl_priv *priv) udelay(5); /* FIXME: apm_ops.suspend(priv) */ - priv->cfg->ops->lib->apm_ops.reset(priv); + if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status)) + priv->cfg->ops->lib->apm_ops.stop(priv); + else + priv->cfg->ops->lib->apm_ops.reset(priv); priv->cfg->ops->lib->free_shared_mem(priv); exit: -- cgit v1.2.3 From 0b124c31838bcf0459708aa91ce859582c7d3ca1 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Wed, 3 Sep 2008 11:18:50 +0800 Subject: iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_remove This patch sets STATUS_EXIT_PENDING on pci_remove. Otherwise iwl4965_down may fail to uninitialize the driver. Signed-off-by: Gregory Greenman Signed-off-by: Mohamed Abbas Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 4e3d6c7fd6d..e01f048a02d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -4372,15 +4372,18 @@ static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) iwl_dbgfs_unregister(priv); sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); + /* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to + * to be called and iwl4965_down since we are removing the device + * we need to set STATUS_EXIT_PENDING bit. + */ + set_bit(STATUS_EXIT_PENDING, &priv->status); if (priv->mac80211_registered) { ieee80211_unregister_hw(priv->hw); priv->mac80211_registered = 0; + } else { + iwl4965_down(priv); } - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl4965_down(priv); - /* make sure we flush any pending irq or * tasklet for the driver */ -- cgit v1.2.3 From 43f30ae0a6308fd5b862ee7851feca1fc18c72d0 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 Aug 2008 14:01:49 +0300 Subject: ath9k: Fix TX status reporting Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 95b33714948..c5107f269f2 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1067,8 +1067,16 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; tx_status->flags &= ~ATH_TX_BAR; } - if (tx_status->flags) - tx_info->status.excessive_retries = 1; + + if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { + /* Frame was not ACKed, but an ACK was expected */ + tx_info->status.excessive_retries = 1; + } + } else { + /* Frame was ACKed */ + tx_info->flags |= IEEE80211_TX_STAT_ACK; + } tx_info->status.retry_count = tx_status->retries; -- cgit v1.2.3 From 9aab3e3ee6f256a1eaabc275e0748132966f963d Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 Aug 2008 14:01:51 +0300 Subject: ath9k: Fix TX control flag use for no ACK and RTS/CTS Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/xmit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 157f830ee6b..550129f717e 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -357,9 +357,9 @@ static int ath_tx_prepare(struct ath_softc *sc, txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) - tx_info->flags |= ATH9K_TXDESC_NOACK; + txctl->flags |= ATH9K_TXDESC_NOACK; if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) - tx_info->flags |= ATH9K_TXDESC_RTSENA; + txctl->flags |= ATH9K_TXDESC_RTSENA; /* * Setup for rate calculations. -- cgit v1.2.3 From 437cf2f1c5f05e34510f43e129af29a716b04ce6 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 3 Sep 2008 14:38:00 -0700 Subject: bnx2x: Accessing un-mapped page The allocated RX buffer size was 64 bytes bigger than the PCI mapped size with no good reason. If the packet was actually using the buffer up to its limit and if the last 64 bytes of the buffer crossed 4KB boundary then an unmapped PCI page was accessed. The fix is to use only one parameter for the buffer size - there is no need to differentiate between the buffer size and the PCI mapping size since the extra 64 bytes can actually be used by the FW to align the Ethernet payload to 64 bytes. Also updating the driver version and date Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x.h | 5 +++-- drivers/net/bnx2x_main.c | 34 +++++++++++++++++----------------- 2 files changed, 20 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index a14dba1afcc..fd705d1295a 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -151,6 +151,8 @@ struct sw_rx_page { #define PAGES_PER_SGE_SHIFT 0 #define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT) +#define BCM_RX_ETH_PAYLOAD_ALIGN 64 + /* SGE ring related macros */ #define NUM_RX_SGE_PAGES 2 #define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge)) @@ -750,8 +752,7 @@ struct bnx2x { u32 rx_csum; u32 rx_offset; - u32 rx_buf_use_size; /* useable size */ - u32 rx_buf_size; /* with alignment */ + u32 rx_buf_size; #define ETH_OVREHEAD (ETH_HLEN + 8) /* 8 for CRC + VLAN */ #define ETH_MIN_PACKET_SIZE 60 #define ETH_MAX_PACKET_SIZE 1500 diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 82deea0a63f..a8eb3c4a47c 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -59,8 +59,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.20" -#define DRV_MODULE_RELDATE "2008/08/25" +#define DRV_MODULE_VERSION "1.45.21" +#define DRV_MODULE_RELDATE "2008/09/03" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ @@ -1027,7 +1027,7 @@ static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp, if (unlikely(skb == NULL)) return -ENOMEM; - mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, + mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_size, PCI_DMA_FROMDEVICE); if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { dev_kfree_skb(skb); @@ -1169,7 +1169,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, /* move empty skb from pool to prod and map it */ prod_rx_buf->skb = fp->tpa_pool[queue].skb; mapping = pci_map_single(bp->pdev, fp->tpa_pool[queue].skb->data, - bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + bp->rx_buf_size, PCI_DMA_FROMDEVICE); pci_unmap_addr_set(prod_rx_buf, mapping, mapping); /* move partial skb from cons to pool (don't unmap yet) */ @@ -1276,7 +1276,7 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, pool entry status to BNX2X_TPA_STOP even if new skb allocation fails. */ pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + bp->rx_buf_size, PCI_DMA_FROMDEVICE); if (likely(new_skb)) { /* fix ip xsum and give it to the stack */ @@ -1520,7 +1520,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget) } else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) { pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, + bp->rx_buf_size, PCI_DMA_FROMDEVICE); skb_reserve(skb, pad); skb_put(skb, len); @@ -4229,7 +4229,7 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp, if (fp->tpa_state[i] == BNX2X_TPA_START) pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, + bp->rx_buf_size, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); @@ -4245,15 +4245,14 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp) u16 ring_prod, cqe_ring_prod; int i, j; - bp->rx_buf_use_size = bp->dev->mtu; - bp->rx_buf_use_size += bp->rx_offset + ETH_OVREHEAD; - bp->rx_buf_size = bp->rx_buf_use_size + 64; + bp->rx_buf_size = bp->dev->mtu; + bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD + + BCM_RX_ETH_PAYLOAD_ALIGN; if (bp->flags & TPA_ENABLE_FLAG) { DP(NETIF_MSG_IFUP, - "rx_buf_use_size %d rx_buf_size %d effective_mtu %d\n", - bp->rx_buf_use_size, bp->rx_buf_size, - bp->dev->mtu + ETH_OVREHEAD); + "rx_buf_size %d effective_mtu %d\n", + bp->rx_buf_size, bp->dev->mtu + ETH_OVREHEAD); for_each_queue(bp, j) { struct bnx2x_fastpath *fp = &bp->fp[j]; @@ -4462,9 +4461,10 @@ static void bnx2x_init_context(struct bnx2x *bp) context->ustorm_st_context.common.status_block_id = sb_id; context->ustorm_st_context.common.flags = USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT; - context->ustorm_st_context.common.mc_alignment_size = 64; + context->ustorm_st_context.common.mc_alignment_size = + BCM_RX_ETH_PAYLOAD_ALIGN; context->ustorm_st_context.common.bd_buff_size = - bp->rx_buf_use_size; + bp->rx_buf_size; context->ustorm_st_context.common.bd_page_base_hi = U64_HI(fp->rx_desc_mapping); context->ustorm_st_context.common.bd_page_base_lo = @@ -4717,7 +4717,7 @@ static void bnx2x_init_internal_func(struct bnx2x *bp) } /* Init CQ ring mapping and aggregation size */ - max_agg_size = min((u32)(bp->rx_buf_use_size + + max_agg_size = min((u32)(bp->rx_buf_size + 8*BCM_PAGE_SIZE*PAGES_PER_SGE), (u32)0xffff); for_each_queue(bp, i) { @@ -5940,7 +5940,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp) pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, + bp->rx_buf_size, PCI_DMA_FROMDEVICE); rx_buf->skb = NULL; -- cgit v1.2.3