From 80b8987c8feaf07a070f7cdcd55db024e9e200ec Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 10 Aug 2007 21:02:15 +0400 Subject: pata_hpt{37x|3x2n}: fix clock reporting (take 2) Fix several inconsistencies in these drivers WRT reporting the clocks: - when using DPLL mode, 'pata_hpt37x' driver reported the DPLL frequency as the PCI clock -- make it properly report both clocks and add the same ability to the 'pata_hpt3x2n' driver; - both drivers sometimes use "pata_hpt3*:" and sometimes "hpt3*:" in the messages -- make them use only the former one; - the message about failed DPLL stablizatios deserves KERN_ERR and a bang. :-) Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 10 ++++++---- drivers/ata/pata_hpt3x2n.c | 8 +++++--- 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 96bbe7c39be..c5ddd937dbf 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.8" +#define DRV_VERSION "0.6.9" struct hpt_clock { u8 xfer_speed; @@ -1112,7 +1112,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); } if (adjust == 8) { - printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n"); + printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n"); return -ENODEV; } if (dpll == 3) @@ -1120,7 +1120,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) else private_data = (void *)hpt37x_timings_50; - printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]); + printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n", + MHz[clock_slot], MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; /* @@ -1133,7 +1134,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) port = &info_hpt370_33; if (clock_slot < 2 && port == &info_hpt370a) port = &info_hpt370a_33; - printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]); + printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n", + chip_table->name, MHz[clock_slot]); } /* Now kick off ATA set up */ diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index aa29cde09f8..f8f234bfc8c 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2006 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. * * * TODO @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.4" enum { HPT_PCI_FAST = (1 << 31), @@ -579,10 +579,12 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); } if (adjust == 8) { - printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n"); + printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n"); return -ENODEV; } + printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n", + pci_mhz); /* Set our private data up. We only need a few flags so we use it directly */ port.private_data = NULL; -- cgit v1.2.3