From 90209b42d0498d57a804bf81fea427bf39c5315c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 26 Oct 2005 22:20:21 +0200 Subject: [PATCH] hwmon: lm90 documentation update Update the I2C addresses for the ADM1032 and ADT7461 chips. Also update the links to the Analog Devices web site. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/hwmon/lm90.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index fa0793e684f..83cf2e1b09f 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -31,7 +31,7 @@ * Devices. That chip is similar to the LM90, with a few differences * that are not handled by this driver. Complete datasheet can be * obtained from Analog's website at: - * http://products.analog.com/products/info.asp?product=ADM1032 + * http://www.analog.com/en/prod/0,2877,ADM1032,00.html * Among others, it has a higher accuracy than the LM90, much like the * LM86 does. * @@ -49,7 +49,7 @@ * register values are decoded differently) it is ignored by this * driver. Complete datasheet can be obtained from Analog's website * at: - * http://products.analog.com/products/info.asp?product=ADT7461 + * http://www.analog.com/en/prod/0,2877,ADT7461,00.html * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -83,10 +83,10 @@ * Addresses to scan * Address is fully defined internally and cannot be changed except for * MAX6659. - * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c. - * LM89-1, and LM99-1 have address 0x4d. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658 + * have address 0x4c. + * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d. * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported). - * ADT7461 always has address 0x4c. */ static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END }; @@ -500,14 +500,12 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) } } else if (man_id == 0x41) { /* Analog Devices */ - if (address == 0x4C - && (chip_id & 0xF0) == 0x40 /* ADM1032 */ + if ((chip_id & 0xF0) == 0x40 /* ADM1032 */ && (reg_config1 & 0x3F) == 0x00 && reg_convrate <= 0x0A) { kind = adm1032; } else - if (address == 0x4c - && chip_id == 0x51 /* ADT7461 */ + if (chip_id == 0x51 /* ADT7461 */ && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ && reg_convrate <= 0x0A) { kind = adt7461; -- cgit v1.2.3