From 91949d64548ead31df51c9fb6f7201ca8ffc9b51 Mon Sep 17 00:00:00 2001
From: Alexander Belyakov <abelyako@mail.ru>
Date: Sun, 4 May 2008 14:32:58 +0400
Subject: [MTD] [NOR] Remove cfi_cmdset_0001.c erase suspend fixup typo

Fix typo in erase suspend while write fixup code leading to compile time
error if CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE was defined.

drivers/mtd/chips/cfi_cmdset_0001.c: In function 'fixup_intel_strataflash':
drivers/mtd/chips/cfi_cmdset_0001.c:212: error: 'struct cfi_pri_amdstd' has no member named 'SuspendCmdSupport'

Signed-off-by: Alexander Belyakov <abelyako@googlemail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/cfi_cmdset_0001.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index fcd1aeccdf9..235830b9e99 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -204,7 +204,7 @@ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
 {
 	struct map_info *map = mtd->priv;
 	struct cfi_private *cfi = map->fldrv_priv;
-	struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
 
 	printk(KERN_WARNING "cfi_cmdset_0001: Suspend "
 	                    "erase on write disabled.\n");
-- 
cgit v1.2.3


From deb1a5f1134e7da0e3dacd37b5d32b7fe0600a7f Mon Sep 17 00:00:00 2001
From: Nate Case <ncase@xes-inc.com>
Date: Tue, 13 May 2008 14:45:29 -0500
Subject: [MTD] [NOR] Support for M50FLW080A and M50FLW080B

Add support for M50FLW080A and M50FLW080B revisions of LPC flash
devices.

Signed-off-by: Aaron Lindner <alindner@xes-inc.com>
Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/cfi_cmdset_0001.c |  4 ++++
 drivers/mtd/chips/jedec_probe.c     | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 235830b9e99..cc6b7bb6de0 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -50,6 +50,8 @@
 #define I82802AC	0x00ac
 #define MANUFACTURER_ST         0x0020
 #define M50LPW080       0x002F
+#define M50FLW080A	0x0080
+#define M50FLW080B	0x0081
 #define AT49BV640D	0x02de
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
@@ -301,6 +303,8 @@ static struct cfi_fixup jedec_fixup_table[] = {
 	{ MANUFACTURER_INTEL, I82802AB,   fixup_use_fwh_lock, NULL, },
 	{ MANUFACTURER_INTEL, I82802AC,   fixup_use_fwh_lock, NULL, },
 	{ MANUFACTURER_ST,    M50LPW080,  fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_ST,    M50FLW080A, fixup_use_fwh_lock, NULL, },
+	{ MANUFACTURER_ST,    M50FLW080B, fixup_use_fwh_lock, NULL, },
 	{ 0, 0, NULL, NULL }
 };
 static struct cfi_fixup fixup_table[] = {
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index aa07575eb28..99f9ed21f66 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -141,6 +141,8 @@
 #define M50FW080	0x002D
 #define M50FW016	0x002E
 #define M50LPW080       0x002F
+#define M50FLW080A	0x0080
+#define M50FLW080B	0x0081
 
 /* SST */
 #define SST29EE020	0x0010
@@ -1590,6 +1592,36 @@ static const struct amd_flash_info jedec_table[] = {
 		.nr_regions	= 1,
 		.regions	= {
 			ERASEINFO(0x10000,16),
+		},
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FLW080A,
+		.name		= "ST M50FLW080A",
+		.devtypes	= CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_UNNECESSARY,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x10000,13),
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x1000,16),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_ST,
+		.dev_id		= M50FLW080B,
+		.name		= "ST M50FLW080B",
+		.devtypes	= CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_UNNECESSARY,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_INTEL_EXT,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x1000,16),
+			ERASEINFO(0x10000,13),
+			ERASEINFO(0x1000,16),
 		}
 	}, {
 		.mfr_id		= MANUFACTURER_TOSHIBA,
-- 
cgit v1.2.3


From 8fd310a1cc3aadb7a17d844beeefae66b1a169c6 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 27 May 2008 11:19:57 +0300
Subject: [MTD] [NOR] Add support for AMD AM29SL800D[BT] NOR flash chips

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/jedec_probe.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 99f9ed21f66..b717f1a5d6b 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -58,6 +58,8 @@
 #define AM29LV040B	0x004F
 #define AM29F032B	0x0041
 #define AM29F002T	0x00B0
+#define AM29SL800DB	0x226B
+#define AM29SL800DT	0x22EA
 
 /* Atmel */
 #define AT49BV512	0x0003
@@ -523,6 +525,36 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x02000,2),
 			ERASEINFO(0x04000,1),
 		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29SL800DT,
+		.name		= "AMD AM29SL800DT",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_AMD,
+		.dev_id		= AM29SL800DB,
+		.name		= "AMD AM29SL800DB",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
 	}, {
 		.mfr_id		= MANUFACTURER_ATMEL,
 		.dev_id		= AT49BV512,
-- 
cgit v1.2.3


From 5c9c11e1c47c2101253a95c54ef72e13edcc728a Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 27 May 2008 11:20:03 +0300
Subject: [MTD] [NOR] Add support for flash chips with ID in bank other than 0

According to JEDEC "Standard Manufacturer's Identification Code"
(http://www.jedec.org/download/search/jep106W.pdf)
several first banks of NOR flash can contain 0x7f instead of actual ID.
This patch adds support for reading manufacturer ID from banks other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/jedec_probe.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index b717f1a5d6b..279fe60b785 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -37,6 +37,7 @@
 #define MANUFACTURER_ST		0x0020
 #define MANUFACTURER_TOSHIBA	0x0098
 #define MANUFACTURER_WINBOND	0x00da
+#define CONTINUATION_CODE	0x007f
 
 
 /* AMD */
@@ -1760,9 +1761,21 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base,
 {
 	map_word result;
 	unsigned long mask;
-	u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type);
-	mask = (1 << (cfi->device_type * 8)) -1;
-	result = map_read(map, base + ofs);
+	int bank = 0;
+
+	/* According to JEDEC "Standard Manufacturer's Identification Code"
+	 * (http://www.jedec.org/download/search/jep106W.pdf)
+	 * several first banks can contain 0x7f instead of actual ID
+	 */
+	do {
+		uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8),
+						  cfi_interleave(cfi),
+						  cfi->device_type);
+		mask = (1 << (cfi->device_type * 8)) - 1;
+		result = map_read(map, base + ofs);
+		bank++;
+	} while ((result.x[0] & mask) == CONTINUATION_CODE);
+
 	return result.x[0] & mask;
 }
 
-- 
cgit v1.2.3


From 1b0b30acf3fc76e5d4d278fa5a8c9c6ac9898745 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 27 May 2008 11:20:07 +0300
Subject: [MTD] [NOR] Add support for Eon EN29SL800B[BT] NOR flash chips

This patch add support for non-CFI Eon EN29SL800B[BT] NOR flash chips.
The Eon chips have manufacturer ID in the first bank, therefore this patch
depends on support for flash chips with ID in bank other than 0.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/chips/jedec_probe.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 279fe60b785..b229da8060d 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -26,6 +26,7 @@
 /* Manufacturers */
 #define MANUFACTURER_AMD	0x0001
 #define MANUFACTURER_ATMEL	0x001f
+#define MANUFACTURER_EON	0x001c
 #define MANUFACTURER_FUJITSU	0x0004
 #define MANUFACTURER_HYUNDAI	0x00AD
 #define MANUFACTURER_INTEL	0x0089
@@ -70,6 +71,10 @@
 #define AT49BV32X	0x00C8
 #define AT49BV32XT	0x00C9
 
+/* Eon */
+#define EN29SL800BB	0x226B
+#define EN29SL800BT	0x22EA
+
 /* Fujitsu */
 #define MBM29F040C	0x00A4
 #define MBM29F800BA	0x2258
@@ -633,6 +638,36 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x10000,63),
 			ERASEINFO(0x02000,8)
 		}
+	}, {
+		.mfr_id		= MANUFACTURER_EON,
+		.dev_id		= EN29SL800BT,
+		.name		= "Eon EN29SL800BT",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x10000,15),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x04000,1),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_EON,
+		.dev_id		= EN29SL800BB,
+		.name		= "Eon EN29SL800BB",
+		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0555,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 4,
+		.regions	= {
+			ERASEINFO(0x04000,1),
+			ERASEINFO(0x02000,2),
+			ERASEINFO(0x08000,1),
+			ERASEINFO(0x10000,15),
+		}
 	}, {
 		.mfr_id		= MANUFACTURER_FUJITSU,
 		.dev_id		= MBM29F040C,
-- 
cgit v1.2.3


From 437d0d299f0e08954c3cb680221d7e888e1a857f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Toralf=20F=C3=B6rster?= <toralf.foerster@gmx.de>
Date: Mon, 26 May 2008 20:35:46 +0200
Subject: [MTD] [NAND] fix 2 "unused variable" warnings in cafe_nand.c
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/cafe_nand.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index da6ceaa80ba..95345d05157 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -626,10 +626,12 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
 {
 	struct mtd_info *mtd;
 	struct cafe_priv *cafe;
-	struct mtd_partition *parts;
 	uint32_t ctrl;
-	int nr_parts;
 	int err = 0;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *parts;
+	int nr_parts;
+#endif
 
 	/* Very old versions shared the same PCI ident for all three
 	   functions on the chip. Verify the class too... */
-- 
cgit v1.2.3


From ff0de61c3612410dc84a8de28761ef840d5d35ac Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Sun, 25 May 2008 07:35:17 -0400
Subject: [MTD] [NAND] excite_nandflash: simplify code using ARRAY_SIZE()
 macro.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/excite_nandflash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
index bed87290dec..ced14b5294d 100644
--- a/drivers/mtd/nand/excite_nandflash.c
+++ b/drivers/mtd/nand/excite_nandflash.c
@@ -209,7 +209,7 @@ static int __init excite_nand_probe(struct device *dev)
 	if (likely(!scan_res)) {
 		DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
 		add_mtd_partitions(&drvdata->board_mtd, partition_info,
-				   sizeof partition_info / sizeof partition_info[0]);
+				   ARRAY_SIZE(partition_info));
 	} else {
 		iounmap(drvdata->regs);
 		kfree(drvdata);
-- 
cgit v1.2.3


From 2606c79759e83fd8b1e45bc99b10e65a1dcf1602 Mon Sep 17 00:00:00 2001
From: "matthias@kaehlcke.net" <matthias@kaehlcke.net>
Date: Sat, 31 May 2008 15:28:09 +0200
Subject: [MTD] use list_for_each_entry() in add_mtd_device()

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/mtdcore.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index f7e7890e5bc..4c102f12346 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -53,7 +53,7 @@ int add_mtd_device(struct mtd_info *mtd)
 
 	for (i=0; i < MAX_MTD_DEVICES; i++)
 		if (!mtd_table[i]) {
-			struct list_head *this;
+			struct mtd_notifier *not;
 
 			mtd_table[i] = mtd;
 			mtd->index = i;
@@ -72,8 +72,7 @@ int add_mtd_device(struct mtd_info *mtd)
 			DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
 			/* No need to get a refcount on the module containing
 			   the notifier, since we hold the mtd_table_mutex */
-			list_for_each(this, &mtd_notifiers) {
-				struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+			list_for_each_entry(not, &mtd_notifiers, list) {
 				not->add(mtd);
 			}
 
-- 
cgit v1.2.3


From 856613c98c2f864994d5fb33a62b7a468f68ab9b Mon Sep 17 00:00:00 2001
From: "matthias@kaehlcke.net" <matthias@kaehlcke.net>
Date: Sat, 31 May 2008 15:28:10 +0200
Subject: [MTD] use list_for_each_entry() in del_mtd_device()

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/mtdcore.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 4c102f12346..8c61035b968 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -112,12 +112,11 @@ int del_mtd_device (struct mtd_info *mtd)
 		       mtd->index, mtd->name, mtd->usecount);
 		ret = -EBUSY;
 	} else {
-		struct list_head *this;
+		struct mtd_notifier *not;
 
 		/* No need to get a refcount on the module containing
 		   the notifier, since we hold the mtd_table_mutex */
-		list_for_each(this, &mtd_notifiers) {
-			struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list);
+		list_for_each_entry(not, &mtd_notifiers, list) {
 			not->remove(mtd);
 		}
 
-- 
cgit v1.2.3


From e9d42227bdc96238676bd28feca5815fcff2d6a8 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 3 Jun 2008 12:26:05 +0800
Subject: [MTD] DataFlash: fix bug - ATMEL AT45DF321D spi flash card fails to
 be copied to (v2)

 - Add support for binary page size DataFlashes.
 - The driver now prints out pagesize and erasesize.
   Printout valuable information for creating flash filesystems.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/devices/mtd_dataflash.c | 117 ++++++++++++++++++++++++++++++++++--
 1 file changed, 112 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index b35e4813a3a..acc3728872e 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -487,7 +487,9 @@ add_dataflash(struct spi_device *spi, char *name,
 	device->write = dataflash_write;
 	device->priv = priv;
 
-	dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024);
+	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
+		"erasesize %d bytes\n", name, device->size/1024,
+		 pagesize, pagesize * 8);	/* 8 pages = 1 block */
 	dev_set_drvdata(&spi->dev, priv);
 
 	if (mtd_has_partitions()) {
@@ -521,7 +523,7 @@ add_dataflash(struct spi_device *spi, char *name,
  *
  *   Device      Density         ID code          #Pages PageSize  Offset
  *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1025    264      9
+ *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
  *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
  *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
  *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
@@ -529,9 +531,114 @@ add_dataflash(struct spi_device *spi, char *name,
  *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
  *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
  */
+
+struct flash_info {
+	char		*name;
+
+	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
+	 * a high byte of zero plus three data bytes: the manufacturer id,
+	 * then a two byte device id.
+	 */
+	u32		jedec_id;
+
+	/* The size listed here is what works with OPCODE_SE, which isn't
+	 * necessarily called a "sector" by the vendor.
+	 */
+	unsigned	nr_pages;
+	u16		pagesize;
+	u16		pageoffset;
+
+	u16		flags;
+#define	SUP_POW2PS	0x02
+#define	IS_POW2PS	0x01
+};
+
+static struct flash_info __devinitdata dataflash_data [] = {
+
+	{ "at45db011d",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+	{ "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db021d",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+	{ "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db041d",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+	{ "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db081d",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+	{ "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db161d",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+	{ "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db321c",  0x1f2700, 8192, 528, 10, },
+
+	{ "at45db321d",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+	{ "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
+
+	{ "at45db641d",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+	{ "at45db641d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+};
+
+static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
+{
+	int			tmp;
+	u8			code = OP_READ_ID;
+	u8			id[3];
+	u32			jedec;
+	struct flash_info	*info;
+	int status;
+
+
+	/* JEDEC also defines an optional "extended device information"
+	 * string for after vendor-specific data, after the three bytes
+	 * we use here.  Supporting some chips might require using it.
+	 */
+	tmp = spi_write_then_read(spi, &code, 1, id, 3);
+	if (tmp < 0) {
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
+			spi->dev.bus_id, tmp);
+		return NULL;
+	}
+	jedec = id[0];
+	jedec = jedec << 8;
+	jedec |= id[1];
+	jedec = jedec << 8;
+	jedec |= id[2];
+
+	for (tmp = 0, info = dataflash_data;
+			tmp < ARRAY_SIZE(dataflash_data);
+			tmp++, info++) {
+		if (info->jedec_id == jedec) {
+			if (info->flags & SUP_POW2PS) {
+				status = dataflash_status(spi);
+				if (status & 0x1)
+					/* return power of 2 pagesize */
+					return ++info;
+				else
+					return info;
+			}
+		}
+	}
+	return NULL;
+}
+
 static int __devinit dataflash_probe(struct spi_device *spi)
 {
 	int status;
+	struct flash_info	*info;
+
+	/*
+	 * Try to detect dataflash by JEDEC ID.
+	 * If it succeeds we know we have either a C or D part.
+	 * D will support power of 2 pagesize option.
+	 */
+
+	info = jedec_probe(spi);
+
+	if (info != NULL)
+		return add_dataflash(spi, info->name, info->nr_pages,
+				 info->pagesize, info->pageoffset);
+
 
 	status = dataflash_status(spi);
 	if (status <= 0 || status == 0xff) {
@@ -551,16 +658,16 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 		status = add_dataflash(spi, "AT45DB011B", 512, 264, 9);
 		break;
 	case 0x14:	/* 0 1 0 1 x x */
-		status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9);
+		status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
 		break;
 	case 0x1c:	/* 0 1 1 1 x x */
-		status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
+		status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9);
 		break;
 	case 0x24:	/* 1 0 0 1 x x */
 		status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
 		break;
 	case 0x2c:	/* 1 0 1 1 x x */
-		status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
+		status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10);
 		break;
 	case 0x34:	/* 1 1 0 1 x x */
 		status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
-- 
cgit v1.2.3


From 271c5c59e00302494ffc299741e7fa2d63103e76 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Wed, 4 Jun 2008 17:43:22 +0100
Subject: [MTD] DataFlash: use proper types

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/devices/mtd_dataflash.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index acc3728872e..54e36bfc2c3 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -82,7 +82,7 @@
 
 
 struct dataflash {
-	u8			command[4];
+	uint8_t			command[4];
 	char			name[24];
 
 	unsigned		partitioned:1;
@@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 	struct spi_transfer	x = { .tx_dma = 0, };
 	struct spi_message	msg;
 	unsigned		blocksize = priv->page_size << 3;
-	u8			*command;
+	uint8_t			*command;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n",
 			spi->dev.bus_id,
@@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 		pageaddr = pageaddr << priv->page_offset;
 
 		command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE;
-		command[1] = (u8)(pageaddr >> 16);
-		command[2] = (u8)(pageaddr >> 8);
+		command[1] = (uint8_t)(pageaddr >> 16);
+		command[2] = (uint8_t)(pageaddr >> 8);
 		command[3] = 0;
 
 		DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n",
@@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	struct spi_transfer	x[2] = { { .tx_dma = 0, }, };
 	struct spi_message	msg;
 	unsigned int		addr;
-	u8			*command;
+	uint8_t			*command;
 	int			status;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n",
@@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	 * fewer "don't care" bytes.  Both buffers stay unchanged.
 	 */
 	command[0] = OP_READ_CONTINUOUS;
-	command[1] = (u8)(addr >> 16);
-	command[2] = (u8)(addr >> 8);
-	command[3] = (u8)(addr >> 0);
+	command[1] = (uint8_t)(addr >> 16);
+	command[2] = (uint8_t)(addr >> 8);
+	command[3] = (uint8_t)(addr >> 0);
 	/* plus 4 "don't care" bytes */
 
 	status = spi_sync(priv->spi, &msg);
@@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	size_t			remaining = len;
 	u_char			*writebuf = (u_char *) buf;
 	int			status = -EINVAL;
-	u8			*command;
+	uint8_t			*command;
 
 	DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n",
 		spi->dev.bus_id, (unsigned)to, (unsigned)(to + len));
@@ -539,16 +539,16 @@ struct flash_info {
 	 * a high byte of zero plus three data bytes: the manufacturer id,
 	 * then a two byte device id.
 	 */
-	u32		jedec_id;
+	uint32_t	jedec_id;
 
 	/* The size listed here is what works with OPCODE_SE, which isn't
 	 * necessarily called a "sector" by the vendor.
 	 */
 	unsigned	nr_pages;
-	u16		pagesize;
-	u16		pageoffset;
+	uint16_t	pagesize;
+	uint16_t	pageoffset;
 
-	u16		flags;
+	uint16_t	flags;
 #define	SUP_POW2PS	0x02
 #define	IS_POW2PS	0x01
 };
@@ -582,9 +582,9 @@ static struct flash_info __devinitdata dataflash_data [] = {
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 {
 	int			tmp;
-	u8			code = OP_READ_ID;
-	u8			id[3];
-	u32			jedec;
+	uint8_t			code = OP_READ_ID;
+	uint8_t			id[3];
+	uint32_t		jedec;
 	struct flash_info	*info;
 	int status;
 
-- 
cgit v1.2.3


From 83973b87938a06a2af7e2a7fd1b630c35f8baff4 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Thu, 29 May 2008 14:52:40 +0900
Subject: [MTD] [OneNAND] Check the ECC status first instead of controller

To get the correct information in case of power off recovery,
it should read ECC status first
Also remove previous workaround method.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/onenand/onenand_base.c | 54 ++++++++++++++++++--------------------
 1 file changed, 25 insertions(+), 29 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 5d7965f7e9c..926cf3a4135 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -325,28 +325,11 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n", ctrl);
-		if (ctrl & ONENAND_CTRL_LOCK)
-			printk(KERN_ERR "onenand_wait: it's locked error.\n");
-		if (state == FL_READING) {
-			/*
-			 * A power loss while writing can result in a page
-			 * becoming unreadable.  When the device is mounted
-			 * again, reading that page gives controller errors.
-			 * Upper level software like JFFS2 treat -EIO as fatal,
-			 * refusing to mount at all.  That means it is necessary
-			 * to treat the error as an ECC error to allow recovery.
-			 * Note that typically in this case, the eraseblock can
-			 * still be erased and rewritten i.e. it has not become
-			 * a bad block.
-			 */
-			mtd->ecc_stats.failed++;
-			return -EBADMSG;
-		}
-		return -EIO;
-	}
-
+	/*
+	 * In the Spec. it checks the controller status first
+	 * However if you get the correct information in case of
+	 * power off recovery (POR) test, it should read ECC status first
+	 */
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
 		if (ecc) {
@@ -364,6 +347,15 @@ static int onenand_wait(struct mtd_info *mtd, int state)
 		return -EIO;
 	}
 
+	/* If there's controller error, it's a real error */
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_ERR "onenand_wait: controller error = 0x%04x\n",
+			ctrl);
+		if (ctrl & ONENAND_CTRL_LOCK)
+			printk(KERN_ERR "onenand_wait: it's locked error.\n");
+		return -EIO;
+	}
+
 	return 0;
 }
 
@@ -1135,22 +1127,26 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state)
 	interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 
-	/* Initial bad block case: 0x2400 or 0x0400 */
-	if (ctrl & ONENAND_CTRL_ERROR) {
-		printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
-		return ONENAND_BBT_READ_ERROR;
-	}
-
 	if (interrupt & ONENAND_INT_READ) {
 		int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
-		if (ecc & ONENAND_ECC_2BIT_ALL)
+		if (ecc & ONENAND_ECC_2BIT_ALL) {
+			printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
+				", controller error 0x%04x\n", ecc, ctrl);
 			return ONENAND_BBT_READ_ERROR;
+		}
 	} else {
 		printk(KERN_ERR "onenand_bbt_wait: read timeout!"
 			"ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
 		return ONENAND_BBT_READ_FATAL_ERROR;
 	}
 
+	/* Initial bad block case: 0x2400 or 0x0400 */
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_DEBUG "onenand_bbt_wait: "
+			"controller error = 0x%04x\n", ctrl);
+		return ONENAND_BBT_READ_ERROR;
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From af3deccfa67341a9df39b6f734afcc85998ad4b7 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 30 May 2008 15:56:18 +0300
Subject: [MTD] [NAND] nandsim: fix size bug

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index bb885d1fcab..b28d76013ab 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -511,7 +511,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	}
 
 	if (ns->options & OPT_SMALLPAGE) {
-		if (ns->geom.totsz < (32 << 20)) {
+		if (ns->geom.totsz <= (32 << 20)) {
 			ns->geom.pgaddrbytes  = 3;
 			ns->geom.secaddrbytes = 2;
 		} else {
-- 
cgit v1.2.3


From 07293b20083cb66df35bf2041f0c554eaac43e8c Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 30 May 2008 15:56:23 +0300
Subject: [MTD] [NAND] nandsim: fix overridesize

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index b28d76013ab..b4805168473 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2022,6 +2022,7 @@ static int __init ns_init_module(void)
 		nsmtd->size = new_size;
 		chip->chipsize = new_size;
 		chip->chip_shift = ffs(new_size) - 1;
+		chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
 	}
 
 	if ((retval = setup_wear_reporting(nsmtd)) != 0)
-- 
cgit v1.2.3


From 6eda7a55f786b75e7d3d636a9431e6c850b20d72 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 30 May 2008 15:56:26 +0300
Subject: [MTD] [NAND] nandsim: allow for 64-bit size

Amend nandsim so that it does not assume 32-bit flash size.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index b4805168473..68c150c8ff9 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -298,11 +298,11 @@ struct nandsim {
 
 	/* NAND flash "geometry" */
 	struct nandsin_geometry {
-		uint32_t totsz;     /* total flash size, bytes */
+		uint64_t totsz;     /* total flash size, bytes */
 		uint32_t secsz;     /* flash sector (erase block) size, bytes */
 		uint pgsz;          /* NAND flash page size, bytes */
 		uint oobsz;         /* page OOB area size, bytes */
-		uint32_t totszoob;  /* total flash size including OOB, bytes */
+		uint64_t totszoob;  /* total flash size including OOB, bytes */
 		uint pgszoob;       /* page size including OOB , bytes*/
 		uint secszoob;      /* sector size including OOB, bytes */
 		uint pgnum;         /* total number of pages */
@@ -459,6 +459,12 @@ static char *get_partition_name(int i)
 	return kstrdup(buf, GFP_KERNEL);
 }
 
+static u_int64_t divide(u_int64_t n, u_int32_t d)
+{
+	do_div(n, d);
+	return n;
+}
+
 /*
  * Initialize the nandsim structure.
  *
@@ -469,8 +475,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
 	struct nandsim   *ns   = (struct nandsim *)(chip->priv);
 	int i, ret = 0;
-	u_int32_t remains;
-	u_int32_t next_offset;
+	u_int64_t remains;
+	u_int64_t next_offset;
 
 	if (NS_IS_INITIALIZED(ns)) {
 		NS_ERR("init_nandsim: nandsim is already initialized\n");
@@ -487,8 +493,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	ns->geom.oobsz    = mtd->oobsize;
 	ns->geom.secsz    = mtd->erasesize;
 	ns->geom.pgszoob  = ns->geom.pgsz + ns->geom.oobsz;
-	ns->geom.pgnum    = ns->geom.totsz / ns->geom.pgsz;
-	ns->geom.totszoob = ns->geom.totsz + ns->geom.pgnum * ns->geom.oobsz;
+	ns->geom.pgnum    = divide(ns->geom.totsz, ns->geom.pgsz);
+	ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
 	ns->geom.secshift = ffs(ns->geom.secsz) - 1;
 	ns->geom.pgshift  = chip->page_shift;
 	ns->geom.oobshift = ffs(ns->geom.oobsz) - 1;
@@ -537,15 +543,16 @@ static int init_nandsim(struct mtd_info *mtd)
 	remains = ns->geom.totsz;
 	next_offset = 0;
 	for (i = 0; i < parts_num; ++i) {
-		unsigned long part = parts[i];
-		if (!part || part > remains / ns->geom.secsz) {
+		u_int64_t part_sz = (u_int64_t)parts[i] * ns->geom.secsz;
+
+		if (!part_sz || part_sz > remains) {
 			NS_ERR("bad partition size.\n");
 			ret = -EINVAL;
 			goto error;
 		}
 		ns->partitions[i].name   = get_partition_name(i);
 		ns->partitions[i].offset = next_offset;
-		ns->partitions[i].size   = part * ns->geom.secsz;
+		ns->partitions[i].size   = part_sz;
 		next_offset += ns->partitions[i].size;
 		remains -= ns->partitions[i].size;
 	}
@@ -573,7 +580,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	if (ns->busw == 16)
 		NS_WARN("16-bit flashes support wasn't tested\n");
 
-	printk("flash size: %u MiB\n",          ns->geom.totsz >> 20);
+	printk("flash size: %llu MiB\n",        ns->geom.totsz >> 20);
 	printk("page size: %u bytes\n",         ns->geom.pgsz);
 	printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
 	printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
@@ -583,7 +590,7 @@ static int init_nandsim(struct mtd_info *mtd)
 	printk("bits in sector size: %u\n",     ns->geom.secshift);
 	printk("bits in page size: %u\n",       ns->geom.pgshift);
 	printk("bits in OOB size: %u\n",        ns->geom.oobshift);
-	printk("flash size with OOB: %u KiB\n", ns->geom.totszoob >> 10);
+	printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
 	printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
 	printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
 	printk("options: %#x\n",                ns->options);
@@ -825,7 +832,7 @@ static int setup_wear_reporting(struct mtd_info *mtd)
 
 	if (!rptwear)
 		return 0;
-	wear_eb_count = mtd->size / mtd->erasesize;
+	wear_eb_count = divide(mtd->size, mtd->erasesize);
 	mem = wear_eb_count * sizeof(unsigned long);
 	if (mem / sizeof(unsigned long) != wear_eb_count) {
 		NS_ERR("Too many erase blocks for wear reporting\n");
@@ -2013,7 +2020,7 @@ static int __init ns_init_module(void)
 	}
 
 	if (overridesize) {
-		u_int32_t new_size = nsmtd->erasesize << overridesize;
+		u_int64_t new_size = (u_int64_t)nsmtd->erasesize << overridesize;
 		if (new_size >> overridesize != nsmtd->erasesize) {
 			NS_ERR("overridesize is too big\n");
 			goto err_exit;
@@ -2021,7 +2028,7 @@ static int __init ns_init_module(void)
 		/* N.B. This relies on nand_scan not doing anything with the size before we change it */
 		nsmtd->size = new_size;
 		chip->chipsize = new_size;
-		chip->chip_shift = ffs(new_size) - 1;
+		chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
 		chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
 	}
 
-- 
cgit v1.2.3


From 59018b6d2acabb114ab58637e6ab95ba424a89d0 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 20 May 2008 01:03:52 +0300
Subject: MTD/JFFS2: remove CVS keywords

Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/Kconfig                 | 2 --
 drivers/mtd/afs.c                   | 2 --
 drivers/mtd/chips/cfi_cmdset_0001.c | 2 --
 drivers/mtd/chips/cfi_cmdset_0002.c | 3 ---
 drivers/mtd/chips/cfi_cmdset_0020.c | 2 --
 drivers/mtd/chips/cfi_probe.c       | 1 -
 drivers/mtd/chips/cfi_util.c        | 3 ---
 drivers/mtd/chips/chipreg.c         | 2 --
 drivers/mtd/chips/gen_probe.c       | 1 -
 drivers/mtd/chips/jedec_probe.c     | 1 -
 drivers/mtd/chips/map_absent.c      | 1 -
 drivers/mtd/chips/map_ram.c         | 1 -
 drivers/mtd/chips/map_rom.c         | 1 -
 drivers/mtd/cmdlinepart.c           | 2 --
 drivers/mtd/devices/Kconfig         | 1 -
 drivers/mtd/devices/Makefile        | 1 -
 drivers/mtd/devices/block2mtd.c     | 6 ------
 drivers/mtd/devices/doc2000.c       | 2 --
 drivers/mtd/devices/doc2001.c       | 2 --
 drivers/mtd/devices/doc2001plus.c   | 2 --
 drivers/mtd/devices/docecc.c        | 2 --
 drivers/mtd/devices/docprobe.c      | 3 ---
 drivers/mtd/devices/lart.c          | 2 --
 drivers/mtd/devices/ms02-nv.c       | 2 --
 drivers/mtd/devices/ms02-nv.h       | 2 --
 drivers/mtd/devices/mtdram.c        | 1 -
 drivers/mtd/devices/phram.c         | 2 --
 drivers/mtd/devices/pmc551.c        | 2 --
 drivers/mtd/devices/slram.c         | 2 --
 drivers/mtd/ftl.c                   | 3 ---
 drivers/mtd/inftlcore.c             | 5 -----
 drivers/mtd/inftlmount.c            | 4 ----
 drivers/mtd/maps/Kconfig            | 1 -
 drivers/mtd/maps/Makefile           | 1 -
 drivers/mtd/maps/amd76xrom.c        | 1 -
 drivers/mtd/maps/autcpu12-nvram.c   | 2 --
 drivers/mtd/maps/bast-flash.c       | 2 --
 drivers/mtd/maps/cdb89712.c         | 1 -
 drivers/mtd/maps/ceiva.c            | 1 -
 drivers/mtd/maps/cfi_flagadm.c      | 2 --
 drivers/mtd/maps/dbox2-flash.c      | 2 --
 drivers/mtd/maps/dc21285.c          | 2 --
 drivers/mtd/maps/dilnetpc.c         | 2 --
 drivers/mtd/maps/dmv182.c           | 2 --
 drivers/mtd/maps/ebony.c            | 2 --
 drivers/mtd/maps/edb7312.c          | 2 --
 drivers/mtd/maps/fortunet.c         | 1 -
 drivers/mtd/maps/h720x-flash.c      | 2 --
 drivers/mtd/maps/ichxrom.c          | 1 -
 drivers/mtd/maps/impa7.c            | 2 --
 drivers/mtd/maps/integrator-flash.c | 2 --
 drivers/mtd/maps/ipaq-flash.c       | 2 --
 drivers/mtd/maps/ixp2000.c          | 2 --
 drivers/mtd/maps/ixp4xx.c           | 2 --
 drivers/mtd/maps/l440gx.c           | 2 --
 drivers/mtd/maps/map_funcs.c        | 2 --
 drivers/mtd/maps/mbx860.c           | 2 --
 drivers/mtd/maps/mtx-1_flash.c      | 2 --
 drivers/mtd/maps/netsc520.c         | 2 --
 drivers/mtd/maps/nettel.c           | 2 --
 drivers/mtd/maps/octagon-5066.c     | 1 -
 drivers/mtd/maps/omap-toto-flash.c  | 2 --
 drivers/mtd/maps/pci.c              | 2 --
 drivers/mtd/maps/pcmciamtd.c        | 5 +----
 drivers/mtd/maps/physmap.c          | 2 --
 drivers/mtd/maps/plat-ram.c         | 2 --
 drivers/mtd/maps/redwood.c          | 2 --
 drivers/mtd/maps/rpxlite.c          | 2 --
 drivers/mtd/maps/sa1100-flash.c     | 2 --
 drivers/mtd/maps/sbc8240.c          | 3 ---
 drivers/mtd/maps/sbc_gxx.c          | 2 --
 drivers/mtd/maps/sc520cdp.c         | 2 --
 drivers/mtd/maps/scb2_flash.c       | 1 -
 drivers/mtd/maps/scx200_docflash.c  | 2 --
 drivers/mtd/maps/sharpsl-flash.c    | 2 --
 drivers/mtd/maps/solutionengine.c   | 2 --
 drivers/mtd/maps/sun_uflash.c       | 2 +-
 drivers/mtd/maps/tqm8xxl.c          | 2 --
 drivers/mtd/maps/ts5500_flash.c     | 2 --
 drivers/mtd/maps/tsunami_flash.c    | 1 -
 drivers/mtd/maps/uclinux.c          | 2 --
 drivers/mtd/maps/vmax301.c          | 1 -
 drivers/mtd/maps/walnut.c           | 2 --
 drivers/mtd/maps/wr_sbc82xx_flash.c | 2 --
 drivers/mtd/mtd_blkdevs.c           | 2 --
 drivers/mtd/mtdblock.c              | 2 --
 drivers/mtd/mtdblock_ro.c           | 2 --
 drivers/mtd/mtdchar.c               | 2 --
 drivers/mtd/mtdconcat.c             | 2 --
 drivers/mtd/mtdcore.c               | 2 --
 drivers/mtd/mtdpart.c               | 2 --
 drivers/mtd/nand/Kconfig            | 1 -
 drivers/mtd/nand/Makefile           | 1 -
 drivers/mtd/nand/au1550nd.c         | 2 --
 drivers/mtd/nand/autcpu12.c         | 2 --
 drivers/mtd/nand/diskonchip.c       | 2 --
 drivers/mtd/nand/edb7312.c          | 2 --
 drivers/mtd/nand/h1910.c            | 2 --
 drivers/mtd/nand/nand_bbt.c         | 2 --
 drivers/mtd/nand/nand_ecc.c         | 2 --
 drivers/mtd/nand/nand_ids.c         | 2 --
 drivers/mtd/nand/nandsim.c          | 2 --
 drivers/mtd/nand/ppchameleonevb.c   | 2 --
 drivers/mtd/nand/rtc_from4.c        | 2 --
 drivers/mtd/nand/s3c2410.c          | 2 --
 drivers/mtd/nand/sharpsl.c          | 2 --
 drivers/mtd/nand/spia.c             | 2 --
 drivers/mtd/nand/toto.c             | 2 --
 drivers/mtd/nand/ts7250.c           | 2 --
 drivers/mtd/nftlcore.c              | 5 -----
 drivers/mtd/nftlmount.c             | 4 ----
 drivers/mtd/redboot.c               | 2 --
 drivers/mtd/rfd_ftl.c               | 2 --
 113 files changed, 2 insertions(+), 224 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index eed06d068fd..14f11f8b9e5 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,5 +1,3 @@
-# $Id: Kconfig,v 1.11 2005/11/07 11:14:19 gleixner Exp $
-
 menuconfig MTD
 	tristate "Memory Technology Device (MTD) support"
 	depends on HAS_IOMEM
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index 52d51eb91c1..d072ca5be68 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -21,8 +21,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: afs.c,v 1.15 2005/11/07 11:14:19 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index cc6b7bb6de0..324ff82a3cd 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0001.c,v 1.186 2005/11/23 22:07:52 nico Exp $
- *
  *
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
  * 	- completely revamped method functions so they are aware and
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index f7fcc638953..a972cc6be43 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -16,9 +16,6 @@
  * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com
  *
  * This code is GPL
- *
- * $Id: cfi_cmdset_0002.c,v 1.122 2005/11/07 11:14:22 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index 1b720cc571f..d4714dd9f7a 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -4,8 +4,6 @@
  *
  * (C) 2000 Red Hat. GPL'd
  *
- * $Id: cfi_cmdset_0020.c,v 1.22 2005/11/07 11:14:22 gleixner Exp $
- *
  * 10/10/2000	Nicolas Pitre <nico@cam.org>
  * 	- completely revamped method functions so they are aware and
  * 	  independent of the flash geometry (buswidth, interleave, etc.)
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index a4463a91ce3..c418e92e1d9 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: cfi_probe.c,v 1.86 2005/11/29 14:48:31 gleixner Exp $
 */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 72e0022a47b..0ee45701801 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -6,9 +6,6 @@
  * Copyright (C) 2003 STMicroelectronics Limited
  *
  * This code is covered by the GPL.
- *
- * $Id: cfi_util.c,v 1.10 2005/11/07 11:14:23 gleixner Exp $
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c
index 2174c97549f..c8576096822 100644
--- a/drivers/mtd/chips/chipreg.c
+++ b/drivers/mtd/chips/chipreg.c
@@ -1,6 +1,4 @@
 /*
- * $Id: chipreg.c,v 1.17 2004/11/16 18:29:00 dwmw2 Exp $
- *
  * Registration for chip drivers
  *
  */
diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index d338b8c9278..e53a58ae384 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -2,7 +2,6 @@
  * Routines common to all CFI-type probes.
  * (C) 2001-2003 Red Hat, Inc.
  * GPL'd
- * $Id: gen_probe.c,v 1.24 2005/11/07 11:14:23 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index b229da8060d..afb35e3a3ce 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1,7 +1,6 @@
 /*
    Common Flash Interface probe code.
    (C) 2000 Red Hat. GPL'd.
-   $Id: jedec_probe.c,v 1.66 2005/11/07 11:14:23 gleixner Exp $
    See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5)
    for the standard this probe goes back to.
 
diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c
index fc478c0f93f..494d30d0631 100644
--- a/drivers/mtd/chips/map_absent.c
+++ b/drivers/mtd/chips/map_absent.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle absent "placeholder" devices
  * Copyright 2001 Resilience Corporation <ebrower@resilience.com>
- * $Id: map_absent.c,v 1.6 2005/11/07 11:14:23 gleixner Exp $
  *
  * This map driver is used to allocate "placeholder" MTD
  * devices on systems that have socketed/removable media.
diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c
index 5cb6d526366..072dd8abf33 100644
--- a/drivers/mtd/chips/map_ram.c
+++ b/drivers/mtd/chips/map_ram.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple RAM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_ram.c,v 1.22 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c
index cb27f855074..821d0ed6bae 100644
--- a/drivers/mtd/chips/map_rom.c
+++ b/drivers/mtd/chips/map_rom.c
@@ -1,7 +1,6 @@
 /*
  * Common code to handle map devices which are simple ROM
  * (C) 2000 Red Hat. GPL'd.
- * $Id: map_rom.c,v 1.23 2005/01/05 18:05:12 dwmw2 Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index e472a0e9de9..68782ab2f0d 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -1,6 +1,4 @@
 /*
- * $Id: cmdlinepart.c,v 1.19 2005/11/07 11:14:19 gleixner Exp $
- *
  * Read flash partition table from command line
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 35ed1103dbb..9c613f06623 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.18 2005/11/07 11:14:24 gleixner Exp $
 
 menu "Self-contained MTD device drivers"
 	depends on MTD!=n
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0f788d5c4bf..0993d5cf392 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/devices/Makefile
 #
-# $Id: Makefile.common,v 1.7 2004/12/22 17:51:15 joern Exp $
 
 obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
 obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index 519d942e794..303ea9b8cfe 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: block2mtd.c,v 1.30 2005/11/29 14:48:32 gleixner Exp $
- *
  * block2mtd.c - create an mtd from a block device
  *
  * Copyright (C) 2001,2002	Simon Evans <spse@secret.org.uk>
@@ -20,9 +18,6 @@
 #include <linux/mutex.h>
 #include <linux/mount.h>
 
-#define VERSION "$Revision: 1.30 $"
-
-
 #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
 #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
 
@@ -451,7 +446,6 @@ MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
 static int __init block2mtd_init(void)
 {
 	int ret = 0;
-	INFO("version " VERSION);
 
 #ifndef MODULE
 	if (strlen(block2mtd_paramline))
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index 846989f292e..50de839c77a 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip 2000 and Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2000.c,v 1.67 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index 6413efc045e..e32c568c114 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -3,8 +3,6 @@
  * Linux driver for Disk-On-Chip Millennium
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- *
- * $Id: doc2001.c,v 1.49 2005/11/07 11:14:24 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 83be3461658..d853f891b58 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -6,8 +6,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: doc2001plus.c,v 1.14 2005/11/07 11:14:24 gleixner Exp $
- *
  * Released under GPL
  */
 
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index fd8a8daba3a..874e51b110a 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -7,8 +7,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: docecc.c,v 1.7 2005/11/07 11:14:25 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index d8cc94ec4e5..6e5d811ae83 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -4,9 +4,6 @@
 /* (C) 1999 Machine Vision Holdings, Inc.			*/
 /* (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>		*/
 
-/* $Id: docprobe.c,v 1.46 2005/11/07 11:14:25 gleixner Exp $	*/
-
-
 
 /* DOC_PASSIVE_PROBE:
    In order to ensure that the BIOS checksum is correct at boot time, and
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 1d324e5c412..f4bda4cee49 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -2,8 +2,6 @@
 /*
  * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
  *
- * $Id: lart.c,v 1.9 2005/11/07 11:14:25 gleixner Exp $
- *
  * Author: Abraham vd Merwe <abraham@2d3d.co.za>
  *
  * Copyright (c) 2001, 2d3D, Inc.
diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c
index 9cff119a202..6a9a24a80a6 100644
--- a/drivers/mtd/devices/ms02-nv.c
+++ b/drivers/mtd/devices/ms02-nv.c
@@ -5,8 +5,6 @@
  *	modify it under the terms of the GNU General Public License
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
- *
- *	$Id: ms02-nv.c,v 1.11 2005/11/14 13:41:47 macro Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/devices/ms02-nv.h b/drivers/mtd/devices/ms02-nv.h
index 8a6eef7cfee..04deafd3a77 100644
--- a/drivers/mtd/devices/ms02-nv.h
+++ b/drivers/mtd/devices/ms02-nv.h
@@ -9,8 +9,6 @@
  *	modify it under the terms of the GNU General Public License
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
- *
- *	$Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
  */
 
 #include <linux/ioport.h>
diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c
index 0399be17862..3aaca88847d 100644
--- a/drivers/mtd/devices/mtdram.c
+++ b/drivers/mtd/devices/mtdram.c
@@ -1,6 +1,5 @@
 /*
  * mtdram - a test mtd device
- * $Id: mtdram.c,v 1.37 2005/04/21 03:42:11 joern Exp $
  * Author: Alexander Larsson <alex@cendio.se>
  *
  * Copyright (c) 1999 Alexander Larsson <alex@cendio.se>
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index c7987b1c5e0..088fbb7595b 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -1,6 +1,4 @@
 /**
- * $Id: phram.c,v 1.16 2005/11/07 11:14:25 gleixner Exp $
- *
  * Copyright (c) ????		Jochen Schäuble <psionic@psionic.de>
  * Copyright (c) 2003-2004	Joern Engel <joern@wh.fh-wedel.de>
  *
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index bc998174906..d38bca64bb1 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pmc551.c,v 1.32 2005/11/07 11:14:25 gleixner Exp $
- *
  * PMC551 PCI Mezzanine Ram Device
  *
  * Author:
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index cb86db746f2..a425d09f35a 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -1,7 +1,5 @@
 /*======================================================================
 
-  $Id: slram.c,v 1.36 2005/11/07 11:14:25 gleixner Exp $
-
   This driver provides a method to access memory not used by the kernel
   itself (i.e. if the kernel commandline mem=xxx is used). To actually
   use slram at least mtdblock or mtdchar is required (for block or
diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 4a79b187b56..3fed8f94ac6 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -1,5 +1,4 @@
 /* This version ported to the Linux-MTD system by dwmw2@infradead.org
- * $Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $
  *
  * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
@@ -1082,8 +1081,6 @@ static struct mtd_blktrans_ops ftl_tr = {
 
 static int init_ftl(void)
 {
-	DEBUG(0, "$Id: ftl.c,v 1.59 2005/11/29 14:48:31 gleixner Exp $\n");
-
 	return register_mtd_blktrans(&ftl_tr);
 }
 
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index b0e396504e6..c4f9d3378b2 100644
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -7,8 +7,6 @@
  * (c) 1999 Machine Vision Holdings, Inc.
  * Author: David Woodhouse <dwmw2@infradead.org>
  *
- * $Id: inftlcore.c,v 1.19 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -953,9 +951,6 @@ static struct mtd_blktrans_ops inftl_tr = {
 
 static int __init init_inftl(void)
 {
-	printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.19 $, "
-		"inftlmount.c %s\n", inftlmountrev);
-
 	return register_mtd_blktrans(&inftl_tr);
 }
 
diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c
index c551d2f0779..9113628ed1e 100644
--- a/drivers/mtd/inftlmount.c
+++ b/drivers/mtd/inftlmount.c
@@ -8,8 +8,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: inftlmount.c,v 1.18 2005/11/07 11:14:20 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -39,8 +37,6 @@
 #include <linux/mtd/inftl.h>
 #include <linux/mtd/compatmac.h>
 
-char inftlmountrev[]="$Revision: 1.18 $";
-
 /*
  * find_boot_record: Find the INFTL Media Header and its Spare copy which
  *	contains the various device information of the INFTL partition and
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 1bd69aa9e22..b2c18024561 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.61 2005/11/07 11:14:26 gleixner Exp $
 
 menu "Mapping drivers for chip access"
 	depends on MTD!=n
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index a9cbe80f99a..5444eaf4026 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/maps/Makefile
 #
-# $Id: Makefile.common,v 1.34 2005/11/07 11:14:26 gleixner Exp $
 
 ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
 obj-$(CONFIG_MTD)		+= map_funcs.o
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 728aed6ad72..948b86f35ef 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -2,7 +2,6 @@
  * amd76xrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: amd76xrom.c,v 1.21 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c
index 7ed3424dd95..cf32267263d 100644
--- a/drivers/mtd/maps/autcpu12-nvram.c
+++ b/drivers/mtd/maps/autcpu12-nvram.c
@@ -2,8 +2,6 @@
  * NV-RAM memory access on autcpu12
  * (C) 2002 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: autcpu12-nvram.c,v 1.9 2005/11/07 11:14:26 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
index 1f492062f8c..ca541488034 100644
--- a/drivers/mtd/maps/bast-flash.c
+++ b/drivers/mtd/maps/bast-flash.c
@@ -9,8 +9,6 @@
  *	20-Sep-2004  BJD  Initial version
  *	17-Jan-2005  BJD  Add whole device if no partitions found
  *
- * $Id: bast-flash.c,v 1.5 2005/11/07 11:14:26 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
index 9f17bb6c5a9..cb507da0a87 100644
--- a/drivers/mtd/maps/cdb89712.c
+++ b/drivers/mtd/maps/cdb89712.c
@@ -1,7 +1,6 @@
 /*
  * Flash on Cirrus CDB89712
  *
- * $Id: cdb89712.c,v 1.11 2005/11/07 11:14:26 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index 629e6e2641a..6464d487eb1 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -11,7 +11,6 @@
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  *
- * $Id: ceiva.c,v 1.11 2004/09/16 23:27:12 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index 65e5ee55201..0ecc3f6d735 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -1,8 +1,6 @@
 /*
  *  Copyright © 2001 Flaga hf. Medical Devices, Kári Davíðsson <kd@flaga.is>
  *
- *  $Id: cfi_flagadm.c,v 1.15 2005/11/07 11:14:26 gleixner Exp $
- *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c
index 92a9c7fac99..e115667bf1d 100644
--- a/drivers/mtd/maps/dbox2-flash.c
+++ b/drivers/mtd/maps/dbox2-flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: dbox2-flash.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
  * D-Box 2 flash driver
  */
 
diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c
index b32bb9347d7..3aa018c092f 100644
--- a/drivers/mtd/maps/dc21285.c
+++ b/drivers/mtd/maps/dc21285.c
@@ -4,8 +4,6 @@
  * (C) 2000  Nicolas Pitre <nico@cam.org>
  *
  * This code is GPL
- *
- * $Id: dc21285.c,v 1.24 2005/11/07 11:14:26 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c
index 1c3b34ad732..0713e3a5a22 100644
--- a/drivers/mtd/maps/dilnetpc.c
+++ b/drivers/mtd/maps/dilnetpc.c
@@ -14,8 +14,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: dilnetpc.c,v 1.20 2005/11/07 11:14:26 gleixner Exp $
- *
  * The DIL/Net PC is a tiny embedded PC board made by SSV Embedded Systems
  * featuring the AMD Elan SC410 processor. There are two variants of this
  * board: DNP/1486 and ADNP/1486. The DNP version has 2 megs of flash
diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c
index e0558b0b2fe..d171674eb2e 100644
--- a/drivers/mtd/maps/dmv182.c
+++ b/drivers/mtd/maps/dmv182.c
@@ -4,8 +4,6 @@
  *
  * Flash map driver for the Dy4 SVME182 board
  *
- * $Id: dmv182.c,v 1.6 2005/11/07 11:14:26 gleixner Exp $
- *
  * Copyright 2003-2004, TimeSys Corporation
  *
  * Based on the SVME181 flash map, by Tom Nelson, Dot4, Inc. for TimeSys Corp.
diff --git a/drivers/mtd/maps/ebony.c b/drivers/mtd/maps/ebony.c
index 1488bb92f26..d92b7c70d3e 100644
--- a/drivers/mtd/maps/ebony.c
+++ b/drivers/mtd/maps/ebony.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ebony.c,v 1.16 2005/11/07 11:14:26 gleixner Exp $
- *
  * Mapping for Ebony user flash
  *
  * Matt Porter <mporter@kernel.crashing.org>
diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c
index 1c5b97c8968..9433738c166 100644
--- a/drivers/mtd/maps/edb7312.c
+++ b/drivers/mtd/maps/edb7312.c
@@ -1,6 +1,4 @@
 /*
- * $Id: edb7312.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on Cogent EDB7312 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c
index 7c50c271651..a8e3fde4cbd 100644
--- a/drivers/mtd/maps/fortunet.c
+++ b/drivers/mtd/maps/fortunet.c
@@ -1,6 +1,5 @@
 /* fortunet.c memory map
  *
- * $Id: fortunet.c,v 1.11 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c
index 6dde3182d64..ef891547446 100644
--- a/drivers/mtd/maps/h720x-flash.c
+++ b/drivers/mtd/maps/h720x-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on Hynix GMS30C7201/HMS30C7202 based
  * evaluation boards
  *
- * $Id: h720x-flash.c,v 1.12 2005/11/07 11:14:27 gleixner Exp $
- *
  * (C) 2002 Jungjun Kim <jungjun.kim@hynix.com>
  *     2003 Thomas Gleixner <tglx@linutronix.de>
  */
diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c
index 2c884c49e84..aeb6c916e23 100644
--- a/drivers/mtd/maps/ichxrom.c
+++ b/drivers/mtd/maps/ichxrom.c
@@ -2,7 +2,6 @@
  * ichxrom.c
  *
  * Normal mappings of chips in physical memory
- * $Id: ichxrom.c,v 1.19 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c
index a0b4dc7155d..2682ab51a36 100644
--- a/drivers/mtd/maps/impa7.c
+++ b/drivers/mtd/maps/impa7.c
@@ -1,6 +1,4 @@
 /*
- * $Id: impa7.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the NOR flash on implementa A7 boards
  *
  * Copyright 2002 SYSGO Real-Time Solutions GmbH
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c
index 325c8880c43..ee361aaadb1 100644
--- a/drivers/mtd/maps/integrator-flash.c
+++ b/drivers/mtd/maps/integrator-flash.c
@@ -22,8 +22,6 @@
    This is access code for flashes using ARM's flash partitioning
    standards.
 
-   $Id: integrator-flash.c,v 1.20 2005/11/07 11:14:27 gleixner Exp $
-
 ======================================================================*/
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index f27c132794c..a806119797e 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -4,8 +4,6 @@
  * (C) 2000 Nicolas Pitre <nico@cam.org>
  * (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
  * (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
- *
- * $Id: ipaq-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index c8396b8574c..c2264792a20 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp2000.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * drivers/mtd/maps/ixp2000.c
  *
  * Mapping for the Intel XScale IXP2000 based systems
diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c
index 01f19a4714b..9c7a5fbd4e5 100644
--- a/drivers/mtd/maps/ixp4xx.c
+++ b/drivers/mtd/maps/ixp4xx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ixp4xx.c,v 1.13 2005/11/16 16:23:21 dvrabel Exp $
- *
  * drivers/mtd/maps/ixp4xx.c
  *
  * MTD Map file for IXP4XX based systems. Please do not make per-board
diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c
index 67620adf481..9e054503c4c 100644
--- a/drivers/mtd/maps/l440gx.c
+++ b/drivers/mtd/maps/l440gx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: l440gx.c,v 1.18 2005/11/07 11:14:27 gleixner Exp $
- *
  * BIOS Flash chip on Intel 440GX board.
  *
  * Bugs this currently does not work under linuxBIOS.
diff --git a/drivers/mtd/maps/map_funcs.c b/drivers/mtd/maps/map_funcs.c
index 9105e6ca0aa..3f268370eec 100644
--- a/drivers/mtd/maps/map_funcs.c
+++ b/drivers/mtd/maps/map_funcs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: map_funcs.c,v 1.10 2005/06/06 23:04:36 tpoynor Exp $
- *
  * Out-of-line map I/O functions for simple maps when CONFIG_COMPLEX_MAPPINGS
  * is enabled.
  */
diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c
index 06b11872784..706f67394b0 100644
--- a/drivers/mtd/maps/mbx860.c
+++ b/drivers/mtd/maps/mbx860.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mbx860.c,v 1.9 2005/11/07 11:14:27 gleixner Exp $
- *
  * Handle mapping of the flash on MBX860 boards
  *
  * Author:	Anton Todorov
diff --git a/drivers/mtd/maps/mtx-1_flash.c b/drivers/mtd/maps/mtx-1_flash.c
index 2a8fde9b92f..a3b65190412 100644
--- a/drivers/mtd/maps/mtx-1_flash.c
+++ b/drivers/mtd/maps/mtx-1_flash.c
@@ -1,8 +1,6 @@
 /*
  * Flash memory access on 4G Systems MTX-1 boards
  *
- * $Id: mtx-1_flash.c,v 1.2 2005/11/07 11:14:27 gleixner Exp $
- *
  * (C) 2005 Bruno Randolf <bruno.randolf@4g-systems.biz>
  * (C) 2005 Joern Engel <joern@wohnheim.fh-wedel.de>
  *
diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c
index 95dcab2146a..c0cb319b2b7 100644
--- a/drivers/mtd/maps/netsc520.c
+++ b/drivers/mtd/maps/netsc520.c
@@ -3,8 +3,6 @@
  * Copyright (C) 2001 Mark Langsdorf (mark.langsdorf@amd.com)
  *	based on sc520cdp.c by Sysgo Real-Time Solutions GmbH
  *
- * $Id: netsc520.c,v 1.14 2005/11/07 11:14:27 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c
index 0c9b305a72e..965e6c6d6ab 100644
--- a/drivers/mtd/maps/nettel.c
+++ b/drivers/mtd/maps/nettel.c
@@ -5,8 +5,6 @@
  *
  *      (C) Copyright 2000-2001, Greg Ungerer (gerg@snapgear.com)
  *      (C) Copyright 2001-2002, SnapGear (www.snapgear.com)
- *
- *	$Id: nettel.c,v 1.12 2005/11/29 14:30:00 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
index a6642db3d32..43e04c1d22a 100644
--- a/drivers/mtd/maps/octagon-5066.c
+++ b/drivers/mtd/maps/octagon-5066.c
@@ -1,4 +1,3 @@
-// $Id: octagon-5066.c,v 1.28 2005/11/07 11:14:27 gleixner Exp $
 /* ######################################################################
 
    Octagon 5066 MTD Driver.
diff --git a/drivers/mtd/maps/omap-toto-flash.c b/drivers/mtd/maps/omap-toto-flash.c
index e6e391efbeb..0a60ebbc217 100644
--- a/drivers/mtd/maps/omap-toto-flash.c
+++ b/drivers/mtd/maps/omap-toto-flash.c
@@ -4,8 +4,6 @@
  * jzhang@ti.com (C) 2003 Texas Instruments.
  *
  *  (C) 2002 MontVista Software, Inc.
- *
- * $Id: omap-toto-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
  */
 
 #include <linux/module.h>
diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c
index d2ab1bae9c3..5c6a25c9038 100644
--- a/drivers/mtd/maps/pci.c
+++ b/drivers/mtd/maps/pci.c
@@ -7,8 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  $Id: pci.c,v 1.14 2005/11/17 08:20:27 dwmw2 Exp $
- *
  * Generic PCI memory map driver.  We support the following boards:
  *  - Intel IQ80310 ATU.
  *  - Intel EBSA285 (blank rom programming mode). Tested working 27/09/2001
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 1912d968718..8f7ca863f89 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pcmciamtd.c,v 1.55 2005/11/07 11:14:28 gleixner Exp $
- *
  * pcmciamtd.c - MTD driver for PCMCIA flash memory cards
  *
  * Author: Simon Evans <spse@secret.org.uk>
@@ -48,7 +46,6 @@ static const int debug = 0;
 
 
 #define DRIVER_DESC	"PCMCIA Flash memory card driver"
-#define DRIVER_VERSION	"$Revision: 1.55 $"
 
 /* Size of the PCMCIA address space: 26 bits = 64 MB */
 #define MAX_PCMCIA_ADDR	0x4000000
@@ -790,7 +787,7 @@ static struct pcmcia_driver pcmciamtd_driver = {
 
 static int __init init_pcmciamtd(void)
 {
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	info(DRIVER_DESC);
 
 	if(bankwidth && bankwidth != 1 && bankwidth != 2) {
 		info("bad bankwidth (%d), using default", bankwidth);
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 183255fcfdc..1f6b9066b63 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -1,6 +1,4 @@
 /*
- * $Id: physmap.c,v 1.39 2005/11/29 14:49:36 gleixner Exp $
- *
  * Normal mappings of chips in physical memory
  *
  * Copyright (C) 2003 MontaVista Software Inc.
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 3eb2643b232..e7dd9c8a965 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -6,8 +6,6 @@
  *
  * Generic platfrom device based RAM map
  *
- * $Id: plat-ram.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 4d858b3d5f8..de002eb1a7f 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redwood.c,v 1.11 2005/11/07 11:14:28 gleixner Exp $
- *
  * drivers/mtd/maps/redwood.c
  *
  * FLASH map for the IBM Redwood 4/5/6 boards.
diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c
index 809a0c8e7aa..14d90edb443 100644
--- a/drivers/mtd/maps/rpxlite.c
+++ b/drivers/mtd/maps/rpxlite.c
@@ -1,6 +1,4 @@
 /*
- * $Id: rpxlite.c,v 1.22 2004/11/04 13:24:15 gleixner Exp $
- *
  * Handle mapping of the flash on the RPX Lite and CLLF boards
  */
 
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index c7d5a52a2d5..e177a43dfff 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -2,8 +2,6 @@
  * Flash memory access on SA11x0 based devices
  *
  * (C) 2000 Nicolas Pitre <nico@cam.org>
- *
- * $Id: sa1100-flash.c,v 1.51 2005/11/07 11:14:28 gleixner Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/drivers/mtd/maps/sbc8240.c b/drivers/mtd/maps/sbc8240.c
index b8c1331b7a0..6e1e99cd2b5 100644
--- a/drivers/mtd/maps/sbc8240.c
+++ b/drivers/mtd/maps/sbc8240.c
@@ -4,9 +4,6 @@
  * Carolyn Smith, Tektronix, Inc.
  *
  * This code is GPLed
- *
- * $Id: sbc8240.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
- *
  */
 
 /*
diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
index 7cc4041d096..1b1c0b7e11e 100644
--- a/drivers/mtd/maps/sbc_gxx.c
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -17,8 +17,6 @@
    along with this program; if not, write to the Free Software
    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 
-   $Id: sbc_gxx.c,v 1.35 2005/11/07 11:14:28 gleixner Exp $
-
 The SBC-MediaGX / SBC-GXx has up to 16 MiB of
 Intel StrataFlash (28F320/28F640) in x8 mode.
 
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 4045e372b90..85c1e56309e 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -16,8 +16,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  *
- * $Id: sc520cdp.c,v 1.23 2005/11/17 08:20:27 dwmw2 Exp $
- *
  *
  * The SC520CDP is an evaluation board for the Elan SC520 processor available
  * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c
index 0fc5584324e..21169e6d646 100644
--- a/drivers/mtd/maps/scb2_flash.c
+++ b/drivers/mtd/maps/scb2_flash.c
@@ -1,6 +1,5 @@
 /*
  * MTD map driver for BIOS Flash on Intel SCB2 boards
- * $Id: scb2_flash.c,v 1.12 2005/03/18 14:04:35 gleixner Exp $
  * Copyright (C) 2002 Sun Microsystems, Inc.
  * Tim Hockin <thockin@sun.com>
  *
diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c
index 5e2bce22f37..b5391ebb736 100644
--- a/drivers/mtd/maps/scx200_docflash.c
+++ b/drivers/mtd/maps/scx200_docflash.c
@@ -2,8 +2,6 @@
 
    Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
 
-   $Id: scx200_docflash.c,v 1.12 2005/11/07 11:14:28 gleixner Exp $
-
    National Semiconductor SCx200 flash mapped with DOCCS
 */
 
diff --git a/drivers/mtd/maps/sharpsl-flash.c b/drivers/mtd/maps/sharpsl-flash.c
index 917dc778f24..026eab02818 100644
--- a/drivers/mtd/maps/sharpsl-flash.c
+++ b/drivers/mtd/maps/sharpsl-flash.c
@@ -4,8 +4,6 @@
  * Copyright (C) 2001 Lineo Japan, Inc.
  * Copyright (C) 2002  SHARP
  *
- * $Id: sharpsl-flash.c,v 1.7 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c,v 1.15 2001/10/02 15:05:14 dwmw2 Exp
  *          Handle mapping of the flash on the RPX Lite and CLLF boards
  *
diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index d76ceef453c..0eb41d9c678 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -1,6 +1,4 @@
 /*
- * $Id: solutionengine.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * Flash and EPROM on Hitachi Solution Engine and similar boards.
  *
  * (C) 2001 Red Hat, Inc.
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 001af7f7ddd..0d7c88396c8 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -1,4 +1,4 @@
-/* $Id: sun_uflash.c,v 1.13 2005/11/07 11:14:28 gleixner Exp $
+/*
  *
  * sun_uflash - Driver implementation for user-programmable flash
  * present on many Sun Microsystems SME boardsets.
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index 52173405731..a5d3d8531fa 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -2,8 +2,6 @@
  * Handle mapping of the flash memory access routines
  * on TQM8xxL based devices.
  *
- * $Id: tqm8xxl.c,v 1.15 2005/11/07 11:14:28 gleixner Exp $
- *
  * based on rpxlite.c
  *
  * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c
index b47270e850b..e2147bf11c8 100644
--- a/drivers/mtd/maps/ts5500_flash.c
+++ b/drivers/mtd/maps/ts5500_flash.c
@@ -22,8 +22,6 @@
  * - Drive A and B use the resident flash disk (RFD) flash translation layer.
  * - If you have created your own jffs file system and the bios overwrites
  *   it during boot, try disabling Drive A: and B: in the boot order.
- *
- * $Id: ts5500_flash.c,v 1.5 2005/11/07 11:14:28 gleixner Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c
index 0f915ac3102..77a8bfc0257 100644
--- a/drivers/mtd/maps/tsunami_flash.c
+++ b/drivers/mtd/maps/tsunami_flash.c
@@ -2,7 +2,6 @@
  * tsunami_flash.c
  *
  * flash chip on alpha ds10...
- * $Id: tsunami_flash.c,v 1.10 2005/11/07 11:14:29 gleixner Exp $
  */
 #include <asm/io.h>
 #include <asm/core_tsunami.h>
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index c42f4b83f68..bac000a8831 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -4,8 +4,6 @@
  *	uclinux.c -- generic memory mapped MTD driver for uclinux
  *
  *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- *
- * 	$Id: uclinux.c,v 1.12 2005/11/07 11:14:29 gleixner Exp $
  */
 
 /****************************************************************************/
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
index b3e48739543..5a0c9a353b0 100644
--- a/drivers/mtd/maps/vmax301.c
+++ b/drivers/mtd/maps/vmax301.c
@@ -1,4 +1,3 @@
-// $Id: vmax301.c,v 1.32 2005/11/07 11:14:29 gleixner Exp $
 /* ######################################################################
 
    Tempustech VMAX SBC301 MTD Driver.
diff --git a/drivers/mtd/maps/walnut.c b/drivers/mtd/maps/walnut.c
index ca932122fb6..e243476c817 100644
--- a/drivers/mtd/maps/walnut.c
+++ b/drivers/mtd/maps/walnut.c
@@ -1,6 +1,4 @@
 /*
- * $Id: walnut.c,v 1.3 2005/11/07 11:14:29 gleixner Exp $
- *
  * Mapping for Walnut flash
  * (used ebony.c as a "framework")
  *
diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c
index ac5b8105b6e..413b0cf9bbd 100644
--- a/drivers/mtd/maps/wr_sbc82xx_flash.c
+++ b/drivers/mtd/maps/wr_sbc82xx_flash.c
@@ -1,6 +1,4 @@
 /*
- * $Id: wr_sbc82xx_flash.c,v 1.8 2005/11/07 11:14:29 gleixner Exp $
- *
  * Map for flash chips on Wind River PowerQUICC II SBC82xx board.
  *
  * Copyright (C) 2004 Red Hat, Inc.
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 839eed8430a..a0ada45672d 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtd_blkdevs.c,v 1.27 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Interface to Linux 2.5 block layer for MTD 'translation layers'.
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 952da30b174..208c6faa035 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -1,8 +1,6 @@
 /*
  * Direct MTD block device access
  *
- * $Id: mtdblock.c,v 1.68 2005/11/07 11:14:20 gleixner Exp $
- *
  * (C) 2000-2003 Nicolas Pitre <nico@cam.org>
  * (C) 1999-2003 David Woodhouse <dwmw2@infradead.org>
  */
diff --git a/drivers/mtd/mtdblock_ro.c b/drivers/mtd/mtdblock_ro.c
index f79dbb49b1a..852165f8b1c 100644
--- a/drivers/mtd/mtdblock_ro.c
+++ b/drivers/mtd/mtdblock_ro.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdblock_ro.c,v 1.19 2004/11/16 18:28:59 dwmw2 Exp $
- *
  * (C) 2003 David Woodhouse <dwmw2@infradead.org>
  *
  * Simple read-only (writable only for RAM) mtdblock driver
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 5d3ac512ce1..4b3156f9b36 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdchar.c,v 1.76 2005/11/07 11:14:20 gleixner Exp $
- *
  * Character-device access to raw MTD devices.
  *
  */
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index d563dcd4b26..2972a5edb73 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -6,8 +6,6 @@
  * NAND support by Christian Gan <cgan@iders.ca>
  *
  * This code is GPL
- *
- * $Id: mtdconcat.c,v 1.11 2005/11/07 11:14:20 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 8c61035b968..4373790401d 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1,6 +1,4 @@
 /*
- * $Id: mtdcore.c,v 1.47 2005/11/07 11:14:20 gleixner Exp $
- *
  * Core registration and callback routines for MTD
  * drivers and users.
  *
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 07c70116934..11b803cc405 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -5,8 +5,6 @@
  *
  * This code is GPL
  *
- * $Id: mtdpart.c,v 1.55 2005/11/07 11:14:20 gleixner Exp $
- *
  * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
  *			added support for read_oob, write_oob
  */
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5076faf9ca6..7dea6c3a660 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.35 2005/11/07 11:14:30 gleixner Exp $
 
 menuconfig MTD_NAND
 	tristate "NAND Device Support"
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a6e74a46992..d95a10c5186 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,7 +1,6 @@
 #
 # linux/drivers/nand/Makefile
 #
-# $Id: Makefile.common,v 1.15 2004/11/26 12:28:22 dedekind Exp $
 
 obj-$(CONFIG_MTD_NAND)			+= nand.o nand_ecc.o
 obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 09e421a9689..22ad9f36776 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Embedded Edge, LLC
  *
- * $Id: au1550nd.c,v 1.13 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index dd38011ee0b..553dd7e9b41 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/spia.c
  *	 Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 0e72153b329..cd4393ce256 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -15,8 +15,6 @@
  * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
  *
  * Interface to generic NAND code for M-Systems DiskOnChip devices
- *
- * $Id: diskonchip.c,v 1.55 2005/11/07 11:14:30 gleixner Exp $
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index ba67bbec20d..387e4352903 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/autcpu12.c
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: edb7312.c,v 1.12 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 2d585d2d090..9e59de501c2 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -7,8 +7,6 @@
  *       Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: h1910.c,v 1.6 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 5e121ceaa59..0b1c48595f1 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -6,8 +6,6 @@
  *
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_bbt.c,v 1.36 2005/11/07 11:14:30 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 9003a135e05..918a806a847 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -9,8 +9,6 @@
  *
  * Copyright (C) 2006 Thomas Gleixner <tglx@linutronix.de>
  *
- * $Id: nand_ecc.c,v 1.15 2005/11/07 11:14:30 gleixner Exp $
- *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 or (at your option) any
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index a3e3ab0185d..69ee2c90eb0 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
  *
- * $Id: nand_ids.c,v 1.16 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 68c150c8ff9..add975a229a 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -21,8 +21,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * $Id: nandsim.c,v 1.8 2005/03/19 15:33:56 dedekind Exp $
  */
 
 #include <linux/init.h>
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 082073acf20..cc865843185 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/edb7312.c
  *
  *
- * $Id: ppchameleonevb.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 26f88215bc4..a033c4cd8e1 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -6,8 +6,6 @@
  *  Derived from drivers/mtd/nand/spia.c
  *       Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: rtc_from4.c,v 1.10 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index b34a460ab67..91f42e48552 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -20,8 +20,6 @@
  *	20-Oct-2005  BJD  Fix timing calculation bug
  *	14-Jan-2006  BJD  Allow clock to be stopped when idle
  *
- * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 033f8800b1e..6dba2fb66ae 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -3,8 +3,6 @@
  *
  *  Copyright (C) 2004 Richard Purdie
  *
- *  $Id: sharpsl.c,v 1.7 2005/11/07 11:14:31 gleixner Exp $
- *
  *  Based on Sharp's NAND driver sharp_sl.c
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index 1f6d429b158..0cc6d0acb8f 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -8,8 +8,6 @@
  *			to controllines	(due to change in nand.c)
  *			page_cache added
  *
- * $Id: spia.c,v 1.25 2005/11/07 11:14:31 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
index f9e2d4a0ab8..bbf492e6830 100644
--- a/drivers/mtd/nand/toto.c
+++ b/drivers/mtd/nand/toto.c
@@ -14,8 +14,6 @@
  *  Overview:
  *   This is a device driver for the NAND flash device found on the
  *   TI fido board. It supports 32MiB and 64MiB cards
- *
- * $Id: toto.c,v 1.5 2005/11/07 11:14:31 gleixner Exp $
  */
 
 #include <linux/slab.h>
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index f40081069ab..807a72752ee 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -9,8 +9,6 @@
  * Derived from drivers/mtd/nand/autcpu12.c
  *   Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: ts7250.c,v 1.4 2004/12/30 22:02:07 joff Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c
index 0c9ce19ea27..320b929abe7 100644
--- a/drivers/mtd/nftlcore.c
+++ b/drivers/mtd/nftlcore.c
@@ -1,7 +1,6 @@
 /* Linux driver for NAND Flash Translation Layer      */
 /* (c) 1999 Machine Vision Holdings, Inc.             */
 /* Author: David Woodhouse <dwmw2@infradead.org>      */
-/* $Id: nftlcore.c,v 1.98 2005/11/07 11:14:21 gleixner Exp $ */
 
 /*
   The contents of this file are distributed under the GNU General
@@ -803,12 +802,8 @@ static struct mtd_blktrans_ops nftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-extern char nftlmountrev[];
-
 static int __init init_nftl(void)
 {
-	printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c %s\n", nftlmountrev);
-
 	return register_mtd_blktrans(&nftl_tr);
 }
 
diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 345e6eff89c..ccc4f209fbb 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -4,8 +4,6 @@
  * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  *
- * $Id: nftlmount.c,v 1.41 2005/11/07 11:14:21 gleixner Exp $
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -31,8 +29,6 @@
 
 #define SECTORSIZE 512
 
-char nftlmountrev[]="$Revision: 1.41 $";
-
 /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the
  *	various device information of the NFTL partition and Bad Unit Table. Update
  *	the ReplUnitTable[] table accroding to the Bad Unit Table. ReplUnitTable[]
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 47474903263..5afa268c02f 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,6 +1,4 @@
 /*
- * $Id: redboot.c,v 1.21 2006/03/30 18:34:37 bjd Exp $
- *
  * Parse RedBoot-style Flash Image System (FIS) tables and
  * produce a Linux partition array to match.
  */
diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c
index c84e4546549..e538c0a72ab 100644
--- a/drivers/mtd/rfd_ftl.c
+++ b/drivers/mtd/rfd_ftl.c
@@ -3,8 +3,6 @@
  *
  * Copyright (C) 2005  Sean Young <sean@mess.org>
  *
- * $Id: rfd_ftl.c,v 1.8 2006/01/15 12:51:44 sean Exp $
- *
  * This type of flash translation layer (FTL) is used by the Embedded BIOS
  * by General Software. It is known as the Resident Flash Disk (RFD), see:
  *
-- 
cgit v1.2.3


From 71a928c0e52cedc43747c64b96a5f74592ab678f Mon Sep 17 00:00:00 2001
From: Chris Malley <mail@chrismalley.co.uk>
Date: Mon, 19 May 2008 20:11:50 +0100
Subject: [MTD] Use list_for_each_entry[_safe] where appropriate.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Janitorial work to remove temporary pointers and make some functions a bit
more readable.

Signed-off-by: Chris Malley <mail@chrismalley.co.uk>
Reviewed-By: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/mtd_blkdevs.c | 32 ++++++++++----------------------
 drivers/mtd/mtdcore.c     |  6 ++----
 drivers/mtd/mtdpart.c     | 23 +++++++----------------
 3 files changed, 19 insertions(+), 42 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index a0ada45672d..9ff007c4962 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -210,7 +210,7 @@ static struct block_device_operations mtd_blktrans_ops = {
 int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 {
 	struct mtd_blktrans_ops *tr = new->tr;
-	struct list_head *this;
+	struct mtd_blktrans_dev *d;
 	int last_devnum = -1;
 	struct gendisk *gd;
 
@@ -219,8 +219,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
 		BUG();
 	}
 
-	list_for_each(this, &tr->devs) {
-		struct mtd_blktrans_dev *d = list_entry(this, struct mtd_blktrans_dev, list);
+	list_for_each_entry(d, &tr->devs, list) {
 		if (new->devnum == -1) {
 			/* Use first free number */
 			if (d->devnum != last_devnum+1) {
@@ -307,33 +306,24 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
 
 static void blktrans_notify_remove(struct mtd_info *mtd)
 {
-	struct list_head *this, *this2, *next;
-
-	list_for_each(this, &blktrans_majors) {
-		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
-		list_for_each_safe(this2, next, &tr->devs) {
-			struct mtd_blktrans_dev *dev = list_entry(this2, struct mtd_blktrans_dev, list);
+	struct mtd_blktrans_ops *tr;
+	struct mtd_blktrans_dev *dev, *next;
 
+	list_for_each_entry(tr, &blktrans_majors, list)
+		list_for_each_entry_safe(dev, next, &tr->devs, list)
 			if (dev->mtd == mtd)
 				tr->remove_dev(dev);
-		}
-	}
 }
 
 static void blktrans_notify_add(struct mtd_info *mtd)
 {
-	struct list_head *this;
+	struct mtd_blktrans_ops *tr;
 
 	if (mtd->type == MTD_ABSENT)
 		return;
 
-	list_for_each(this, &blktrans_majors) {
-		struct mtd_blktrans_ops *tr = list_entry(this, struct mtd_blktrans_ops, list);
-
+	list_for_each_entry(tr, &blktrans_majors, list)
 		tr->add_mtd(tr, mtd);
-	}
-
 }
 
 static struct mtd_notifier blktrans_notifier = {
@@ -404,7 +394,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr)
 
 int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 {
-	struct list_head *this, *next;
+	struct mtd_blktrans_dev *dev, *next;
 
 	mutex_lock(&mtd_table_mutex);
 
@@ -414,10 +404,8 @@ int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr)
 	/* Remove it from the list of active majors */
 	list_del(&tr->list);
 
-	list_for_each_safe(this, next, &tr->devs) {
-		struct mtd_blktrans_dev *dev = list_entry(this, struct mtd_blktrans_dev, list);
+	list_for_each_entry_safe(dev, next, &tr->devs, list)
 		tr->remove_dev(dev);
-	}
 
 	blk_cleanup_queue(tr->blkcore_priv->rq);
 	unregister_blkdev(tr->major, tr->name);
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 4373790401d..a9d24694982 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -70,9 +70,8 @@ int add_mtd_device(struct mtd_info *mtd)
 			DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
 			/* No need to get a refcount on the module containing
 			   the notifier, since we hold the mtd_table_mutex */
-			list_for_each_entry(not, &mtd_notifiers, list) {
+			list_for_each_entry(not, &mtd_notifiers, list)
 				not->add(mtd);
-			}
 
 			mutex_unlock(&mtd_table_mutex);
 			/* We _know_ we aren't being removed, because
@@ -114,9 +113,8 @@ int del_mtd_device (struct mtd_info *mtd)
 
 		/* No need to get a refcount on the module containing
 		   the notifier, since we hold the mtd_table_mutex */
-		list_for_each_entry(not, &mtd_notifiers, list) {
+		list_for_each_entry(not, &mtd_notifiers, list)
 			not->remove(mtd);
-		}
 
 		mtd_table[mtd->index] = NULL;
 
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 11b803cc405..56a760a736a 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -300,22 +300,15 @@ static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
 
 int del_mtd_partitions(struct mtd_info *master)
 {
-	struct list_head *node;
-	struct mtd_part *slave;
+	struct mtd_part *slave, *next;
 
-	for (node = mtd_partitions.next;
-	     node != &mtd_partitions;
-	     node = node->next) {
-		slave = list_entry(node, struct mtd_part, list);
+	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
-			struct list_head *prev = node->prev;
-			__list_del(prev, node->next);
+			list_del(&slave->list);
 			if(slave->registered)
 				del_mtd_device(&slave->mtd);
 			kfree(slave);
-			node = prev;
 		}
-	}
 
 	return 0;
 }
@@ -511,18 +504,16 @@ static LIST_HEAD(part_parsers);
 
 static struct mtd_part_parser *get_partition_parser(const char *name)
 {
-	struct list_head *this;
-	void *ret = NULL;
-	spin_lock(&part_parser_lock);
+	struct mtd_part_parser *p, *ret = NULL;
 
-	list_for_each(this, &part_parsers) {
-		struct mtd_part_parser *p = list_entry(this, struct mtd_part_parser, list);
+	spin_lock(&part_parser_lock);
 
+	list_for_each_entry(p, &part_parsers, list)
 		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
 			ret = p;
 			break;
 		}
-	}
+
 	spin_unlock(&part_parser_lock);
 
 	return ret;
-- 
cgit v1.2.3


From 2e3c22f57029ce04d55c07b8332ae405005456d9 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 19 May 2008 18:32:24 +0800
Subject: [MTD] [MAPS] Blackfin Async Flash Maps
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Handle the case where flash memory and ethernet mac/phy are mapped onto
the same async bank

[try #4]
 - drop superfluous casts
 - drop SSYNC() when reading from the flash and rewrite
   bfin_copy_from() to be like bfin_copy_to() so that
   we dont have to handle all the aligned/unaligned cases

[try #3] rename bf5xx-flash to bfin-async-flash
 - move all kconfig board settings into board resources
 - fixup casting style according to lkml feedback
 - rewrite driver so that it can handle arbitrary of
   instances according to the declared platform resources

[try #2]
Remove useless SSYNC() as Will said

[try #1]
The BF533-STAMP does this for example.
All board-specific configuration goes in your board resources file.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Acked-By: Jörn Engel <joern@logfs.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/maps/Kconfig            |  11 ++
 drivers/mtd/maps/Makefile           |   1 +
 drivers/mtd/maps/bfin-async-flash.c | 219 ++++++++++++++++++++++++++++++++++++
 3 files changed, 231 insertions(+)
 create mode 100644 drivers/mtd/maps/bfin-async-flash.c

(limited to 'drivers')

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index b2c18024561..02c45e1e24e 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -523,6 +523,17 @@ config MTD_PCMCIA_ANONYMOUS
 
 	  If unsure, say N.
 
+config MTD_BFIN_ASYNC
+	tristate "Blackfin BF533-STAMP Flash Chip Support"
+	depends on BFIN533_STAMP && MTD_CFI
+	select MTD_PARTITIONS
+	default y
+	help
+	  Map driver which allows for simultaneous utilization of
+	  ethernet and CFI parallel flash.
+
+	  If compiled as a module, it will be called bfin-async-flash.
+
 config MTD_UCLINUX
 	tristate "Generic uClinux RAM/ROM filesystem support"
 	depends on MTD_PARTITIONS && !MMU
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 5444eaf4026..d6cfce49058 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
 obj-$(CONFIG_MTD_MTX1)		+= mtx-1_flash.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
+obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
new file mode 100644
index 00000000000..6fec86aaed7
--- /dev/null
+++ b/drivers/mtd/maps/bfin-async-flash.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/mtd/maps/bfin-async-flash.c
+ *
+ * Handle the case where flash memory and ethernet mac/phy are
+ * mapped onto the same async bank.  The BF533-STAMP does this
+ * for example.  All board-specific configuration goes in your
+ * board resources file.
+ *
+ * Copyright 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/blackfin.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/unaligned.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "bfin-async-flash"
+
+struct async_state {
+	struct mtd_info *mtd;
+	struct map_info map;
+	int enet_flash_pin;
+	uint32_t flash_ambctl0, flash_ambctl1;
+	uint32_t save_ambctl0, save_ambctl1;
+	unsigned long irq_flags;
+};
+
+static void switch_to_flash(struct async_state *state)
+{
+	local_irq_save(state->irq_flags);
+
+	gpio_set_value(state->enet_flash_pin, 0);
+
+	state->save_ambctl0 = bfin_read_EBIU_AMBCTL0();
+	state->save_ambctl1 = bfin_read_EBIU_AMBCTL1();
+	bfin_write_EBIU_AMBCTL0(state->flash_ambctl0);
+	bfin_write_EBIU_AMBCTL1(state->flash_ambctl1);
+	SSYNC();
+}
+
+static void switch_back(struct async_state *state)
+{
+	bfin_write_EBIU_AMBCTL0(state->save_ambctl0);
+	bfin_write_EBIU_AMBCTL1(state->save_ambctl1);
+	SSYNC();
+
+	gpio_set_value(state->enet_flash_pin, 1);
+
+	local_irq_restore(state->irq_flags);
+}
+
+static map_word bfin_read(struct map_info *map, unsigned long ofs)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+	uint16_t word;
+	map_word test;
+
+	switch_to_flash(state);
+
+	word = readw(map->virt + ofs);
+
+	switch_back(state);
+
+	test.x[0] = word;
+	return test;
+}
+
+static void bfin_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+
+	switch_to_flash(state);
+
+	memcpy(to, map->virt + from, len);
+
+	switch_back(state);
+}
+
+static void bfin_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+	uint16_t d;
+
+	d = d1.x[0];
+
+	switch_to_flash(state);
+
+	writew(d, map->virt + ofs);
+	SSYNC();
+
+	switch_back(state);
+}
+
+static void bfin_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	struct async_state *state = (struct async_state *)map->map_priv_1;
+
+	switch_to_flash(state);
+
+	memcpy(map->virt + to, from, len);
+	SSYNC();
+
+	switch_back(state);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+static int __devinit bfin_flash_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct physmap_flash_data *pdata = pdev->dev.platform_data;
+	struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	struct async_state *state;
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	state->map.name       = DRIVER_NAME;
+	state->map.read       = bfin_read;
+	state->map.copy_from  = bfin_copy_from;
+	state->map.write      = bfin_write;
+	state->map.copy_to    = bfin_copy_to;
+	state->map.bankwidth  = pdata->width;
+	state->map.size       = memory->end - memory->start + 1;
+	state->map.virt       = (void __iomem *)memory->start;
+	state->map.phys       = memory->start;
+	state->map.map_priv_1 = (unsigned long)state;
+	state->enet_flash_pin = platform_get_irq(pdev, 0);
+	state->flash_ambctl0  = flash_ambctl->start;
+	state->flash_ambctl1  = flash_ambctl->end;
+
+	if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
+		pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+		return -EBUSY;
+	}
+	gpio_direction_output(state->enet_flash_pin, 1);
+
+	pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
+	state->mtd = do_map_probe(memory->name, &state->map);
+	if (!state->mtd)
+		return -ENXIO;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+	if (ret > 0) {
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, ret);
+
+	} else if (pdata->nr_parts) {
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+	} else
+#endif
+	{
+		pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n");
+		add_mtd_device(state->mtd);
+	}
+
+	platform_set_drvdata(pdev, state);
+
+	return 0;
+}
+
+static int __devexit bfin_flash_remove(struct platform_device *pdev)
+{
+	struct async_state *state = platform_get_drvdata(pdev);
+	gpio_free(state->enet_flash_pin);
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(state->mtd);
+#endif
+	map_destroy(state->mtd);
+	kfree(state);
+	return 0;
+}
+
+static struct platform_driver bfin_flash_driver = {
+	.probe		= bfin_flash_probe,
+	.remove		= __devexit_p(bfin_flash_remove),
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init bfin_flash_init(void)
+{
+	return platform_driver_register(&bfin_flash_driver);
+}
+module_init(bfin_flash_init);
+
+static void __exit bfin_flash_exit(void)
+{
+	platform_driver_unregister(&bfin_flash_driver);
+}
+module_exit(bfin_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank");
-- 
cgit v1.2.3


From 451d33993b13174d27474ad2ce7a2f10ce2e31ad Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 20 May 2008 17:32:14 +0100
Subject: [MTD] [NAND] S3C2410: Change printk() into dev_dbg()

Fix a minor problem with what should have been
debug output by changing printk() to dev_dbg()
inside s3c2410_nand_update_chip().

Thanks to David Woodhouse for pointing this out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/s3c2410.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 91f42e48552..c9726bd2c64 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -689,7 +689,8 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
 {
 	struct nand_chip *chip = &nmtd->chip;
 
-	printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift);
+	dev_dbg(info->device, "chip %p => page shift %d\n",
+		chip, chip->page_shift);
 
 	if (hardware_ecc) {
 		/* change the behaviour depending on wether we are using
-- 
cgit v1.2.3


From 7e74a5076edb3555dc6c96dc91b155706515bb4c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 20 May 2008 17:32:27 +0100
Subject: [MTD] [NAND] S3C2410: Remove changelog and tidy header

The changelog on the driver is superflous given this
is being kept under revision control. Remove the other
cruft in the header and update the copyright and the
supported device list.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/s3c2410.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index c9726bd2c64..35c6db54c98 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,24 +1,10 @@
 /* linux/drivers/mtd/nand/s3c2410.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright © 2004-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2410/S3C240 NAND driver
- *
- * Changelog:
- *	21-Sep-2004  BJD  Initial version
- *	23-Sep-2004  BJD  Multiple device support
- *	28-Sep-2004  BJD  Fixed ECC placement for Hardware mode
- *	12-Oct-2004  BJD  Fixed errors in use of platform data
- *	18-Feb-2005  BJD  Fix sparse errors
- *	14-Mar-2005  BJD  Applied tglx's code reduction patch
- *	02-May-2005  BJD  Fixed s3c2440 support
- *	02-May-2005  BJD  Reduced hwcontrol decode
- *	20-Jun-2005  BJD  Updated s3c2440 support, fixed timing bug
- *	08-Jul-2005  BJD  Fix OOPS when no platform data supplied
- *	20-Oct-2005  BJD  Fix timing calculation bug
- *	14-Jan-2006  BJD  Allow clock to be stopped when idle
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
-- 
cgit v1.2.3


From 4474573a90bae41351fad576fa80c424d62be567 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 5 Jun 2008 09:43:03 -0700
Subject: [MTD] [NAND] nandsim: missing header for do_div

Fix nandsim build error, missing #include:

linux-next-20080605/drivers/mtd/nand/nandsim.c: In function 'divide':
linux-next-20080605/drivers/mtd/nand/nandsim.c:462: error: implicit declaration of function 'do_div'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/nandsim.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index add975a229a..ecd70e2504f 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/list.h>
 #include <linux/random.h>
+#include <asm/div64.h>
 
 /* Default simulator parameters values */
 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE)  || \
-- 
cgit v1.2.3


From aa83570e23e626fe8dd1253f17e6d175507025f1 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 6 Jun 2008 18:59:40 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: fix section mismatch between probe and
 remove

WARNING: drivers/mtd/nand/built-in.o(.devinit.text+0x114): Section mismatch
in reference from the function fsl_elbc_ctrl_probe() to the function
.devexit.text:fsl_elbc_ctrl_remove()

__devinit functions should not call functions with __devexit. Since probe
function calls remove in case of errors, we want to remove __devexit
attribute from it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 4b69aacdf5c..1b06d29dd06 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -917,7 +917,7 @@ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
 	return 0;
 }
 
-static int __devexit fsl_elbc_ctrl_remove(struct of_device *ofdev)
+static int fsl_elbc_ctrl_remove(struct of_device *ofdev)
 {
 	struct fsl_elbc_ctrl *ctrl = dev_get_drvdata(&ofdev->dev);
 	int i;
@@ -1041,7 +1041,7 @@ static struct of_platform_driver fsl_elbc_ctrl_driver = {
 	},
 	.match_table = fsl_elbc_match,
 	.probe = fsl_elbc_ctrl_probe,
-	.remove = __devexit_p(fsl_elbc_ctrl_remove),
+	.remove = fsl_elbc_ctrl_remove,
 };
 
 static int __init fsl_elbc_init(void)
-- 
cgit v1.2.3


From 62fd71fe710886ba449e932ad7877f4a8340c2d4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:51 +0200
Subject: [MTD] [NAND] at91_nand: Convert to generic GPIO API
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

No point in using an AT91-specific GPIO API when the generic API works
just as well.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/at91_nand.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
index 0adb287027a..2dcaeeae206 100644
--- a/drivers/mtd/nand/at91_nand.c
+++ b/drivers/mtd/nand/at91_nand.c
@@ -31,12 +31,10 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
+#include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/sizes.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
 
 #ifdef CONFIG_MTD_NAND_AT91_ECC_HW
 #define hard_ecc	1
@@ -99,7 +97,7 @@ struct at91_nand_host {
 static void at91_nand_enable(struct at91_nand_host *host)
 {
 	if (host->board->enable_pin)
-		at91_set_gpio_value(host->board->enable_pin, 0);
+		gpio_set_value(host->board->enable_pin, 0);
 }
 
 /*
@@ -108,7 +106,7 @@ static void at91_nand_enable(struct at91_nand_host *host)
 static void at91_nand_disable(struct at91_nand_host *host)
 {
 	if (host->board->enable_pin)
-		at91_set_gpio_value(host->board->enable_pin, 1);
+		gpio_set_value(host->board->enable_pin, 1);
 }
 
 /*
@@ -142,7 +140,7 @@ static int at91_nand_device_ready(struct mtd_info *mtd)
 	struct nand_chip *nand_chip = mtd->priv;
 	struct at91_nand_host *host = nand_chip->priv;
 
-	return at91_get_gpio_value(host->board->rdy_pin);
+	return gpio_get_value(host->board->rdy_pin);
 }
 
 /*
@@ -447,7 +445,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 	at91_nand_enable(host);
 
 	if (host->board->det_pin) {
-		if (at91_get_gpio_value(host->board->det_pin)) {
+		if (gpio_get_value(host->board->det_pin)) {
 			printk ("No SmartMedia card inserted.\n");
 			res = ENXIO;
 			goto out;
-- 
cgit v1.2.3


From d4f4c0aa8e36f69e46360b3d3569dc15d6099894 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:52 +0200
Subject: [MTD] [NAND] rename at91_nand -> atmel_nand: file names and Kconfig
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The AT91 NAND driver needs just a few tiny modifications to work on
AVR32 as well. Rename it atmel_nand to reflect this.

Also move the ECC register definitions into drivers/mtd/nand since they
are only useful to the atmel_nand driver, and get rid of the useless
filename at the top of each file.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/Kconfig          |  17 +-
 drivers/mtd/nand/Makefile         |   2 +-
 drivers/mtd/nand/at91_nand.c      | 592 --------------------------------------
 drivers/mtd/nand/atmel_nand.c     | 590 +++++++++++++++++++++++++++++++++++++
 drivers/mtd/nand/atmel_nand_ecc.h |  36 +++
 5 files changed, 636 insertions(+), 601 deletions(-)
 delete mode 100644 drivers/mtd/nand/at91_nand.c
 create mode 100644 drivers/mtd/nand/atmel_nand.c
 create mode 100644 drivers/mtd/nand/atmel_nand_ecc.h

(limited to 'drivers')

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7dea6c3a660..cdd2952c153 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -271,7 +271,7 @@ config MTD_NAND_CS553X
 
 	  If you say "m", the module will be called "cs553x_nand.ko".
 
-config MTD_NAND_AT91
+config MTD_NAND_ATMEL
 	bool "Support for NAND Flash / SmartMedia on AT91"
 	depends on ARCH_AT91
 	help
@@ -279,14 +279,15 @@ config MTD_NAND_AT91
 	  on Atmel AT91 processors.
 choice
 	prompt "ECC management for NAND Flash / SmartMedia on AT91"
-	depends on MTD_NAND_AT91
+	depends on MTD_NAND_ATMEL
 
-config MTD_NAND_AT91_ECC_HW
+config MTD_NAND_ATMEL_ECC_HW
 	bool "Hardware ECC"
 	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
 	help
-	  Uses hardware ECC provided by the at91sam9260/at91sam9263 chip
-	  instead of software ECC.
+	  Use hardware ECC instead of software ECC when the chip
+	  supports it.
+
 	  The hardware ECC controller is capable of single bit error
 	  correction and 2-bit random detection per page.
 
@@ -296,16 +297,16 @@ config MTD_NAND_AT91_ECC_HW
 
 	  If unsure, say Y
 
-config MTD_NAND_AT91_ECC_SOFT
+config MTD_NAND_ATMEL_ECC_SOFT
 	bool "Software ECC"
 	help
-	  Uses software ECC.
+	  Use software ECC.
 
 	  NB : hardware and software ECC schemes are incompatible.
 	  If you switch from one to another, you'll have to erase your
 	  mtd partition.
 
-config MTD_NAND_AT91_ECC_NONE
+config MTD_NAND_ATMEL_ECC_NONE
 	bool "No ECC (testing only, DANGEROUS)"
 	depends on DEBUG_KERNEL
 	help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d95a10c5186..d772581de57 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_MTD_NAND_TS7250)		+= ts7250.o
 obj-$(CONFIG_MTD_NAND_NANDSIM)		+= nandsim.o
 obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
-obj-$(CONFIG_MTD_NAND_AT91)		+= at91_nand.o
+obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
diff --git a/drivers/mtd/nand/at91_nand.c b/drivers/mtd/nand/at91_nand.c
deleted file mode 100644
index 2dcaeeae206..00000000000
--- a/drivers/mtd/nand/at91_nand.c
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- * drivers/mtd/nand/at91_nand.c
- *
- *  Copyright (C) 2003 Rick Bronson
- *
- *  Derived from drivers/mtd/nand/autcpu12.c
- *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- *  Derived from drivers/mtd/spia.c
- *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
- *
- *
- *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
- *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
- *
- *     Derived from Das U-Boot source code
- *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
- *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/gpio.h>
-#include <asm/io.h>
-
-#include <asm/arch/board.h>
-
-#ifdef CONFIG_MTD_NAND_AT91_ECC_HW
-#define hard_ecc	1
-#else
-#define hard_ecc	0
-#endif
-
-#ifdef CONFIG_MTD_NAND_AT91_ECC_NONE
-#define no_ecc		1
-#else
-#define no_ecc		0
-#endif
-
-/* Register access macros */
-#define ecc_readl(add, reg)				\
-	__raw_readl(add + AT91_ECC_##reg)
-#define ecc_writel(add, reg, value)			\
-	__raw_writel((value), add + AT91_ECC_##reg)
-
-#include <asm/arch/at91_ecc.h> /* AT91SAM9260/3 ECC registers */
-
-/* oob layout for large page size
- * bad block info is on bytes 0 and 1
- * the bytes have to be consecutives to avoid
- * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout at91_oobinfo_large = {
-	.eccbytes = 4,
-	.eccpos = {60, 61, 62, 63},
-	.oobfree = {
-		{2, 58}
-	},
-};
-
-/* oob layout for small page size
- * bad block info is on bytes 4 and 5
- * the bytes have to be consecutives to avoid
- * several NAND_CMD_RNDOUT during read
- */
-static struct nand_ecclayout at91_oobinfo_small = {
-	.eccbytes = 4,
-	.eccpos = {0, 1, 2, 3},
-	.oobfree = {
-		{6, 10}
-	},
-};
-
-struct at91_nand_host {
-	struct nand_chip	nand_chip;
-	struct mtd_info		mtd;
-	void __iomem		*io_base;
-	struct at91_nand_data	*board;
-	struct device		*dev;
-	void __iomem		*ecc;
-};
-
-/*
- * Enable NAND.
- */
-static void at91_nand_enable(struct at91_nand_host *host)
-{
-	if (host->board->enable_pin)
-		gpio_set_value(host->board->enable_pin, 0);
-}
-
-/*
- * Disable NAND.
- */
-static void at91_nand_disable(struct at91_nand_host *host)
-{
-	if (host->board->enable_pin)
-		gpio_set_value(host->board->enable_pin, 1);
-}
-
-/*
- * Hardware specific access to control-lines
- */
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_NCE)
-			at91_nand_enable(host);
-		else
-			at91_nand_disable(host);
-	}
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, host->io_base + (1 << host->board->cle));
-	else
-		writeb(cmd, host->io_base + (1 << host->board->ale));
-}
-
-/*
- * Read the Device Ready pin.
- */
-static int at91_nand_device_ready(struct mtd_info *mtd)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-
-	return gpio_get_value(host->board->rdy_pin);
-}
-
-/*
- * write oob for small pages
- */
-static int at91_nand_write_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip, int page)
-{
-	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-	int eccsize = chip->ecc.size, length = mtd->oobsize;
-	int len, pos, status = 0;
-	const uint8_t *bufpoi = chip->oob_poi;
-
-	pos = eccsize + chunk;
-
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-	len = min_t(int, length, chunk);
-	chip->write_buf(mtd, bufpoi, len);
-	bufpoi += len;
-	length -= len;
-	if (length > 0)
-		chip->write_buf(mtd, bufpoi, length);
-
-	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-	status = chip->waitfunc(mtd, chip);
-
-	return status & NAND_STATUS_FAIL ? -EIO : 0;
-
-}
-
-/*
- * read oob for small pages
- */
-static int at91_nand_read_oob_512(struct mtd_info *mtd,
-		struct nand_chip *chip,	int page, int sndcmd)
-{
-	if (sndcmd) {
-		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-		sndcmd = 0;
-	}
-	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-	return sndcmd;
-}
-
-/*
- * Calculate HW ECC
- *
- * function called after a write
- *
- * mtd:        MTD block structure
- * dat:        raw data (unused)
- * ecc_code:   buffer for ECC
- */
-static int at91_nand_calculate(struct mtd_info *mtd,
-		const u_char *dat, unsigned char *ecc_code)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
-	unsigned int ecc_value;
-
-	/* get the first 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, PR);
-
-	ecc_code[eccpos[0]] = ecc_value & 0xFF;
-	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
-
-	/* get the last 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
-
-	ecc_code[eccpos[2]] = ecc_value & 0xFF;
-	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
-
-	return 0;
-}
-
-/*
- * HW ECC read page function
- *
- * mtd:        mtd info structure
- * chip:       nand chip info structure
- * buf:        buffer to store read data
- */
-static int at91_nand_read_page(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf)
-{
-	int eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	uint32_t *eccpos = chip->ecc.layout->eccpos;
-	uint8_t *p = buf;
-	uint8_t *oob = chip->oob_poi;
-	uint8_t *ecc_pos;
-	int stat;
-
-	/* read the page */
-	chip->read_buf(mtd, p, eccsize);
-
-	/* move to ECC position if needed */
-	if (eccpos[0] != 0) {
-		/* This only works on large pages
-		 * because the ECC controller waits for
-		 * NAND_CMD_RNDOUTSTART after the
-		 * NAND_CMD_RNDOUT.
-		 * anyway, for small pages, the eccpos[0] == 0
-		 */
-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
-				mtd->writesize + eccpos[0], -1);
-	}
-
-	/* the ECC controller needs to read the ECC just after the data */
-	ecc_pos = oob + eccpos[0];
-	chip->read_buf(mtd, ecc_pos, eccbytes);
-
-	/* check if there's an error */
-	stat = chip->ecc.correct(mtd, p, oob, NULL);
-
-	if (stat < 0)
-		mtd->ecc_stats.failed++;
-	else
-		mtd->ecc_stats.corrected += stat;
-
-	/* get back to oob start (end of page) */
-	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
-
-	/* read the oob */
-	chip->read_buf(mtd, oob, mtd->oobsize);
-
-	return 0;
-}
-
-/*
- * HW ECC Correction
- *
- * function called after a read
- *
- * mtd:        MTD block structure
- * dat:        raw data read from the chip
- * read_ecc:   ECC from the chip (unused)
- * isnull:     unused
- *
- * Detect and correct a 1 bit error for a page
- */
-static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
-		u_char *read_ecc, u_char *isnull)
-{
-	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
-	unsigned int ecc_status;
-	unsigned int ecc_word, ecc_bit;
-
-	/* get the status from the Status Register */
-	ecc_status = ecc_readl(host->ecc, SR);
-
-	/* if there's no error */
-	if (likely(!(ecc_status & AT91_ECC_RECERR)))
-		return 0;
-
-	/* get error bit offset (4 bits) */
-	ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
-	/* get word address (12 bits) */
-	ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
-	ecc_word >>= 4;
-
-	/* if there are multiple errors */
-	if (ecc_status & AT91_ECC_MULERR) {
-		/* check if it is a freshly erased block
-		 * (filled with 0xff) */
-		if ((ecc_bit == AT91_ECC_BITADDR)
-				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
-			/* the block has just been erased, return OK */
-			return 0;
-		}
-		/* it doesn't seems to be a freshly
-		 * erased block.
-		 * We can't correct so many errors */
-		dev_dbg(host->dev, "at91_nand : multiple errors detected."
-				" Unable to correct.\n");
-		return -EIO;
-	}
-
-	/* if there's a single bit error : we can correct it */
-	if (ecc_status & AT91_ECC_ECCERR) {
-		/* there's nothing much to do here.
-		 * the bit error is on the ECC itself.
-		 */
-		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
-				" Nothing to correct\n");
-		return 0;
-	}
-
-	dev_dbg(host->dev, "at91_nand : one bit error on data."
-			" (word offset in the page :"
-			" 0x%x bit offset : 0x%x)\n",
-			ecc_word, ecc_bit);
-	/* correct the error */
-	if (nand_chip->options & NAND_BUSWIDTH_16) {
-		/* 16 bits words */
-		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
-	} else {
-		/* 8 bits words */
-		dat[ecc_word] ^= (1 << ecc_bit);
-	}
-	dev_dbg(host->dev, "at91_nand : error corrected\n");
-	return 1;
-}
-
-/*
- * Enable HW ECC : unsused
- */
-static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-#endif
-
-/*
- * Probe for the NAND device.
- */
-static int __init at91_nand_probe(struct platform_device *pdev)
-{
-	struct at91_nand_host *host;
-	struct mtd_info *mtd;
-	struct nand_chip *nand_chip;
-	struct resource *regs;
-	struct resource *mem;
-	int res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-	struct mtd_partition *partitions = NULL;
-	int num_partitions = 0;
-#endif
-
-	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
-	if (!host) {
-		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
-		return -ENOMEM;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
-		return -ENXIO;
-	}
-
-	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
-	if (host->io_base == NULL) {
-		printk(KERN_ERR "at91_nand: ioremap failed\n");
-		kfree(host);
-		return -EIO;
-	}
-
-	mtd = &host->mtd;
-	nand_chip = &host->nand_chip;
-	host->board = pdev->dev.platform_data;
-	host->dev = &pdev->dev;
-
-	nand_chip->priv = host;		/* link the private data structures */
-	mtd->priv = nand_chip;
-	mtd->owner = THIS_MODULE;
-
-	/* Set address of NAND IO lines */
-	nand_chip->IO_ADDR_R = host->io_base;
-	nand_chip->IO_ADDR_W = host->io_base;
-	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
-
-	if (host->board->rdy_pin)
-		nand_chip->dev_ready = at91_nand_device_ready;
-
-	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!regs && hard_ecc) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource "
-				"regs\nFalling back on software ECC\n");
-	}
-
-	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-	if (no_ecc)
-		nand_chip->ecc.mode = NAND_ECC_NONE;
-	if (hard_ecc && regs) {
-		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
-		if (host->ecc == NULL) {
-			printk(KERN_ERR "at91_nand: ioremap failed\n");
-			res = -EIO;
-			goto err_ecc_ioremap;
-		}
-		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-		nand_chip->ecc.calculate = at91_nand_calculate;
-		nand_chip->ecc.correct = at91_nand_correct;
-		nand_chip->ecc.hwctl = at91_nand_hwctl;
-		nand_chip->ecc.read_page = at91_nand_read_page;
-		nand_chip->ecc.bytes = 4;
-		nand_chip->ecc.prepad = 0;
-		nand_chip->ecc.postpad = 0;
-	}
-
-	nand_chip->chip_delay = 20;		/* 20us command delay time */
-
-	if (host->board->bus_width_16)		/* 16-bit bus width */
-		nand_chip->options |= NAND_BUSWIDTH_16;
-
-	platform_set_drvdata(pdev, host);
-	at91_nand_enable(host);
-
-	if (host->board->det_pin) {
-		if (gpio_get_value(host->board->det_pin)) {
-			printk ("No SmartMedia card inserted.\n");
-			res = ENXIO;
-			goto out;
-		}
-	}
-
-	/* first scan to find the device and get the page size */
-	if (nand_scan_ident(mtd, 1)) {
-		res = -ENXIO;
-		goto out;
-	}
-
-	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
-		/* ECC is calculated for the whole page (1 step) */
-		nand_chip->ecc.size = mtd->writesize;
-
-		/* set ECC page size and oob layout */
-		switch (mtd->writesize) {
-		case 512:
-			nand_chip->ecc.layout = &at91_oobinfo_small;
-			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
-			break;
-		case 1024:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
-			break;
-		case 2048:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
-			break;
-		case 4096:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
-			break;
-		default:
-			/* page size not handled by HW ECC */
-			/* switching back to soft ECC */
-			nand_chip->ecc.mode = NAND_ECC_SOFT;
-			nand_chip->ecc.calculate = NULL;
-			nand_chip->ecc.correct = NULL;
-			nand_chip->ecc.hwctl = NULL;
-			nand_chip->ecc.read_page = NULL;
-			nand_chip->ecc.postpad = 0;
-			nand_chip->ecc.prepad = 0;
-			nand_chip->ecc.bytes = 0;
-			break;
-		}
-	}
-
-	/* second phase scan */
-	if (nand_scan_tail(mtd)) {
-		res = -ENXIO;
-		goto out;
-	}
-
-#ifdef CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd->name = "at91_nand";
-	num_partitions = parse_mtd_partitions(mtd, part_probes,
-					      &partitions, 0);
-#endif
-	if (num_partitions <= 0 && host->board->partition_info)
-		partitions = host->board->partition_info(mtd->size,
-							 &num_partitions);
-
-	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-		res = ENXIO;
-		goto release;
-	}
-
-	res = add_mtd_partitions(mtd, partitions, num_partitions);
-#else
-	res = add_mtd_device(mtd);
-#endif
-
-	if (!res)
-		return res;
-
-#ifdef CONFIG_MTD_PARTITIONS
-release:
-#endif
-	nand_release(mtd);
-
-out:
-	iounmap(host->ecc);
-
-err_ecc_ioremap:
-	at91_nand_disable(host);
-	platform_set_drvdata(pdev, NULL);
-	iounmap(host->io_base);
-	kfree(host);
-	return res;
-}
-
-/*
- * Remove a NAND device.
- */
-static int __devexit at91_nand_remove(struct platform_device *pdev)
-{
-	struct at91_nand_host *host = platform_get_drvdata(pdev);
-	struct mtd_info *mtd = &host->mtd;
-
-	nand_release(mtd);
-
-	at91_nand_disable(host);
-
-	iounmap(host->io_base);
-	iounmap(host->ecc);
-	kfree(host);
-
-	return 0;
-}
-
-static struct platform_driver at91_nand_driver = {
-	.probe		= at91_nand_probe,
-	.remove		= at91_nand_remove,
-	.driver		= {
-		.name	= "at91_nand",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init at91_nand_init(void)
-{
-	return platform_driver_register(&at91_nand_driver);
-}
-
-
-static void __exit at91_nand_exit(void)
-{
-	platform_driver_unregister(&at91_nand_driver);
-}
-
-
-module_init(at91_nand_init);
-module_exit(at91_nand_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9");
-MODULE_ALIAS("platform:at91_nand");
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
new file mode 100644
index 00000000000..51b703155db
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -0,0 +1,590 @@
+/*
+ *  Copyright (C) 2003 Rick Bronson
+ *
+ *  Derived from drivers/mtd/nand/autcpu12.c
+ *	 Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ *  Derived from drivers/mtd/spia.c
+ *	 Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
+ *
+ *
+ *  Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
+ *     Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007
+ *
+ *     Derived from Das U-Boot source code
+ *     		(u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
+ *     (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#include <asm/arch/board.h>
+
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
+#define hard_ecc	1
+#else
+#define hard_ecc	0
+#endif
+
+#ifdef CONFIG_MTD_NAND_ATMEL_ECC_NONE
+#define no_ecc		1
+#else
+#define no_ecc		0
+#endif
+
+/* Register access macros */
+#define ecc_readl(add, reg)				\
+	__raw_readl(add + AT91_ECC_##reg)
+#define ecc_writel(add, reg, value)			\
+	__raw_writel((value), add + AT91_ECC_##reg)
+
+#include "atmel_nand_ecc.h"	/* Hardware ECC registers */
+
+/* oob layout for large page size
+ * bad block info is on bytes 0 and 1
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout at91_oobinfo_large = {
+	.eccbytes = 4,
+	.eccpos = {60, 61, 62, 63},
+	.oobfree = {
+		{2, 58}
+	},
+};
+
+/* oob layout for small page size
+ * bad block info is on bytes 4 and 5
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout at91_oobinfo_small = {
+	.eccbytes = 4,
+	.eccpos = {0, 1, 2, 3},
+	.oobfree = {
+		{6, 10}
+	},
+};
+
+struct at91_nand_host {
+	struct nand_chip	nand_chip;
+	struct mtd_info		mtd;
+	void __iomem		*io_base;
+	struct at91_nand_data	*board;
+	struct device		*dev;
+	void __iomem		*ecc;
+};
+
+/*
+ * Enable NAND.
+ */
+static void at91_nand_enable(struct at91_nand_host *host)
+{
+	if (host->board->enable_pin)
+		gpio_set_value(host->board->enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void at91_nand_disable(struct at91_nand_host *host)
+{
+	if (host->board->enable_pin)
+		gpio_set_value(host->board->enable_pin, 1);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_NCE)
+			at91_nand_enable(host);
+		else
+			at91_nand_disable(host);
+	}
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, host->io_base + (1 << host->board->cle));
+	else
+		writeb(cmd, host->io_base + (1 << host->board->ale));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int at91_nand_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+
+	return gpio_get_value(host->board->rdy_pin);
+}
+
+/*
+ * write oob for small pages
+ */
+static int at91_nand_write_oob_512(struct mtd_info *mtd,
+		struct nand_chip *chip, int page)
+{
+	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+	int eccsize = chip->ecc.size, length = mtd->oobsize;
+	int len, pos, status = 0;
+	const uint8_t *bufpoi = chip->oob_poi;
+
+	pos = eccsize + chunk;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
+	len = min_t(int, length, chunk);
+	chip->write_buf(mtd, bufpoi, len);
+	bufpoi += len;
+	length -= len;
+	if (length > 0)
+		chip->write_buf(mtd, bufpoi, length);
+
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+	status = chip->waitfunc(mtd, chip);
+
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+
+}
+
+/*
+ * read oob for small pages
+ */
+static int at91_nand_read_oob_512(struct mtd_info *mtd,
+		struct nand_chip *chip,	int page, int sndcmd)
+{
+	if (sndcmd) {
+		chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+		sndcmd = 0;
+	}
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	return sndcmd;
+}
+
+/*
+ * Calculate HW ECC
+ *
+ * function called after a write
+ *
+ * mtd:        MTD block structure
+ * dat:        raw data (unused)
+ * ecc_code:   buffer for ECC
+ */
+static int at91_nand_calculate(struct mtd_info *mtd,
+		const u_char *dat, unsigned char *ecc_code)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
+	unsigned int ecc_value;
+
+	/* get the first 2 ECC bytes */
+	ecc_value = ecc_readl(host->ecc, PR);
+
+	ecc_code[eccpos[0]] = ecc_value & 0xFF;
+	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
+
+	/* get the last 2 ECC bytes */
+	ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
+
+	ecc_code[eccpos[2]] = ecc_value & 0xFF;
+	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
+
+	return 0;
+}
+
+/*
+ * HW ECC read page function
+ *
+ * mtd:        mtd info structure
+ * chip:       nand chip info structure
+ * buf:        buffer to store read data
+ */
+static int at91_nand_read_page(struct mtd_info *mtd,
+		struct nand_chip *chip, uint8_t *buf)
+{
+	int eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p = buf;
+	uint8_t *oob = chip->oob_poi;
+	uint8_t *ecc_pos;
+	int stat;
+
+	/* read the page */
+	chip->read_buf(mtd, p, eccsize);
+
+	/* move to ECC position if needed */
+	if (eccpos[0] != 0) {
+		/* This only works on large pages
+		 * because the ECC controller waits for
+		 * NAND_CMD_RNDOUTSTART after the
+		 * NAND_CMD_RNDOUT.
+		 * anyway, for small pages, the eccpos[0] == 0
+		 */
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+				mtd->writesize + eccpos[0], -1);
+	}
+
+	/* the ECC controller needs to read the ECC just after the data */
+	ecc_pos = oob + eccpos[0];
+	chip->read_buf(mtd, ecc_pos, eccbytes);
+
+	/* check if there's an error */
+	stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+	if (stat < 0)
+		mtd->ecc_stats.failed++;
+	else
+		mtd->ecc_stats.corrected += stat;
+
+	/* get back to oob start (end of page) */
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+
+	/* read the oob */
+	chip->read_buf(mtd, oob, mtd->oobsize);
+
+	return 0;
+}
+
+/*
+ * HW ECC Correction
+ *
+ * function called after a read
+ *
+ * mtd:        MTD block structure
+ * dat:        raw data read from the chip
+ * read_ecc:   ECC from the chip (unused)
+ * isnull:     unused
+ *
+ * Detect and correct a 1 bit error for a page
+ */
+static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
+		u_char *read_ecc, u_char *isnull)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct at91_nand_host *host = nand_chip->priv;
+	unsigned int ecc_status;
+	unsigned int ecc_word, ecc_bit;
+
+	/* get the status from the Status Register */
+	ecc_status = ecc_readl(host->ecc, SR);
+
+	/* if there's no error */
+	if (likely(!(ecc_status & AT91_ECC_RECERR)))
+		return 0;
+
+	/* get error bit offset (4 bits) */
+	ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
+	/* get word address (12 bits) */
+	ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
+	ecc_word >>= 4;
+
+	/* if there are multiple errors */
+	if (ecc_status & AT91_ECC_MULERR) {
+		/* check if it is a freshly erased block
+		 * (filled with 0xff) */
+		if ((ecc_bit == AT91_ECC_BITADDR)
+				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
+			/* the block has just been erased, return OK */
+			return 0;
+		}
+		/* it doesn't seems to be a freshly
+		 * erased block.
+		 * We can't correct so many errors */
+		dev_dbg(host->dev, "at91_nand : multiple errors detected."
+				" Unable to correct.\n");
+		return -EIO;
+	}
+
+	/* if there's a single bit error : we can correct it */
+	if (ecc_status & AT91_ECC_ECCERR) {
+		/* there's nothing much to do here.
+		 * the bit error is on the ECC itself.
+		 */
+		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
+				" Nothing to correct\n");
+		return 0;
+	}
+
+	dev_dbg(host->dev, "at91_nand : one bit error on data."
+			" (word offset in the page :"
+			" 0x%x bit offset : 0x%x)\n",
+			ecc_word, ecc_bit);
+	/* correct the error */
+	if (nand_chip->options & NAND_BUSWIDTH_16) {
+		/* 16 bits words */
+		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
+	} else {
+		/* 8 bits words */
+		dat[ecc_word] ^= (1 << ecc_bit);
+	}
+	dev_dbg(host->dev, "at91_nand : error corrected\n");
+	return 1;
+}
+
+/*
+ * Enable HW ECC : unsused
+ */
+static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*
+ * Probe for the NAND device.
+ */
+static int __init at91_nand_probe(struct platform_device *pdev)
+{
+	struct at91_nand_host *host;
+	struct mtd_info *mtd;
+	struct nand_chip *nand_chip;
+	struct resource *regs;
+	struct resource *mem;
+	int res;
+
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *partitions = NULL;
+	int num_partitions = 0;
+#endif
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
+	if (!host) {
+		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
+		return -ENOMEM;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
+		return -ENXIO;
+	}
+
+	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
+	if (host->io_base == NULL) {
+		printk(KERN_ERR "at91_nand: ioremap failed\n");
+		kfree(host);
+		return -EIO;
+	}
+
+	mtd = &host->mtd;
+	nand_chip = &host->nand_chip;
+	host->board = pdev->dev.platform_data;
+	host->dev = &pdev->dev;
+
+	nand_chip->priv = host;		/* link the private data structures */
+	mtd->priv = nand_chip;
+	mtd->owner = THIS_MODULE;
+
+	/* Set address of NAND IO lines */
+	nand_chip->IO_ADDR_R = host->io_base;
+	nand_chip->IO_ADDR_W = host->io_base;
+	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+
+	if (host->board->rdy_pin)
+		nand_chip->dev_ready = at91_nand_device_ready;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!regs && hard_ecc) {
+		printk(KERN_ERR "at91_nand: can't get I/O resource "
+				"regs\nFalling back on software ECC\n");
+	}
+
+	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
+	if (no_ecc)
+		nand_chip->ecc.mode = NAND_ECC_NONE;
+	if (hard_ecc && regs) {
+		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
+		if (host->ecc == NULL) {
+			printk(KERN_ERR "at91_nand: ioremap failed\n");
+			res = -EIO;
+			goto err_ecc_ioremap;
+		}
+		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+		nand_chip->ecc.calculate = at91_nand_calculate;
+		nand_chip->ecc.correct = at91_nand_correct;
+		nand_chip->ecc.hwctl = at91_nand_hwctl;
+		nand_chip->ecc.read_page = at91_nand_read_page;
+		nand_chip->ecc.bytes = 4;
+		nand_chip->ecc.prepad = 0;
+		nand_chip->ecc.postpad = 0;
+	}
+
+	nand_chip->chip_delay = 20;		/* 20us command delay time */
+
+	if (host->board->bus_width_16)		/* 16-bit bus width */
+		nand_chip->options |= NAND_BUSWIDTH_16;
+
+	platform_set_drvdata(pdev, host);
+	at91_nand_enable(host);
+
+	if (host->board->det_pin) {
+		if (gpio_get_value(host->board->det_pin)) {
+			printk ("No SmartMedia card inserted.\n");
+			res = ENXIO;
+			goto out;
+		}
+	}
+
+	/* first scan to find the device and get the page size */
+	if (nand_scan_ident(mtd, 1)) {
+		res = -ENXIO;
+		goto out;
+	}
+
+	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
+		/* ECC is calculated for the whole page (1 step) */
+		nand_chip->ecc.size = mtd->writesize;
+
+		/* set ECC page size and oob layout */
+		switch (mtd->writesize) {
+		case 512:
+			nand_chip->ecc.layout = &at91_oobinfo_small;
+			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
+			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
+			break;
+		case 1024:
+			nand_chip->ecc.layout = &at91_oobinfo_large;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
+			break;
+		case 2048:
+			nand_chip->ecc.layout = &at91_oobinfo_large;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
+			break;
+		case 4096:
+			nand_chip->ecc.layout = &at91_oobinfo_large;
+			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
+			break;
+		default:
+			/* page size not handled by HW ECC */
+			/* switching back to soft ECC */
+			nand_chip->ecc.mode = NAND_ECC_SOFT;
+			nand_chip->ecc.calculate = NULL;
+			nand_chip->ecc.correct = NULL;
+			nand_chip->ecc.hwctl = NULL;
+			nand_chip->ecc.read_page = NULL;
+			nand_chip->ecc.postpad = 0;
+			nand_chip->ecc.prepad = 0;
+			nand_chip->ecc.bytes = 0;
+			break;
+		}
+	}
+
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
+		res = -ENXIO;
+		goto out;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	mtd->name = "at91_nand";
+	num_partitions = parse_mtd_partitions(mtd, part_probes,
+					      &partitions, 0);
+#endif
+	if (num_partitions <= 0 && host->board->partition_info)
+		partitions = host->board->partition_info(mtd->size,
+							 &num_partitions);
+
+	if ((!partitions) || (num_partitions == 0)) {
+		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+		res = ENXIO;
+		goto release;
+	}
+
+	res = add_mtd_partitions(mtd, partitions, num_partitions);
+#else
+	res = add_mtd_device(mtd);
+#endif
+
+	if (!res)
+		return res;
+
+#ifdef CONFIG_MTD_PARTITIONS
+release:
+#endif
+	nand_release(mtd);
+
+out:
+	iounmap(host->ecc);
+
+err_ecc_ioremap:
+	at91_nand_disable(host);
+	platform_set_drvdata(pdev, NULL);
+	iounmap(host->io_base);
+	kfree(host);
+	return res;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int __devexit at91_nand_remove(struct platform_device *pdev)
+{
+	struct at91_nand_host *host = platform_get_drvdata(pdev);
+	struct mtd_info *mtd = &host->mtd;
+
+	nand_release(mtd);
+
+	at91_nand_disable(host);
+
+	iounmap(host->io_base);
+	iounmap(host->ecc);
+	kfree(host);
+
+	return 0;
+}
+
+static struct platform_driver at91_nand_driver = {
+	.probe		= at91_nand_probe,
+	.remove		= at91_nand_remove,
+	.driver		= {
+		.name	= "at91_nand",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init at91_nand_init(void)
+{
+	return platform_driver_register(&at91_nand_driver);
+}
+
+
+static void __exit at91_nand_exit(void)
+{
+	platform_driver_unregister(&at91_nand_driver);
+}
+
+
+module_init(at91_nand_init);
+module_exit(at91_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
+MODULE_ALIAS("platform:at91_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 00000000000..170db869aac
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,36 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define AT91_ECC_CR		0x00			/* Control register */
+#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
+
+#define AT91_ECC_MR		0x04			/* Mode register */
+#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
+#define			AT91_ECC_PAGESIZE_528		(0)
+#define			AT91_ECC_PAGESIZE_1056		(1)
+#define			AT91_ECC_PAGESIZE_2112		(2)
+#define			AT91_ECC_PAGESIZE_4224		(3)
+
+#define AT91_ECC_SR		0x08			/* Status register */
+#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
+#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
+#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
+
+#define AT91_ECC_PR		0x0c			/* Parity register */
+#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
+#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
+
+#define AT91_ECC_NPR		0x10			/* NParity register */
+#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
+
+#endif
-- 
cgit v1.2.3


From 3c3796cc32b6e53653a5eb868dc959b8c2779db9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:53 +0200
Subject: [MTD] [NAND] rename at91_nand -> atmel_nand: internal symbols
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is basically s/at91_nand/atmel_nand/g with some manual inspection.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/atmel_nand.c     | 152 +++++++++++++++++++-------------------
 drivers/mtd/nand/atmel_nand_ecc.h |  34 ++++-----
 2 files changed, 93 insertions(+), 93 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 51b703155db..675a82ca77f 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -48,9 +48,9 @@
 
 /* Register access macros */
 #define ecc_readl(add, reg)				\
-	__raw_readl(add + AT91_ECC_##reg)
+	__raw_readl(add + ATMEL_ECC_##reg)
 #define ecc_writel(add, reg, value)			\
-	__raw_writel((value), add + AT91_ECC_##reg)
+	__raw_writel((value), add + ATMEL_ECC_##reg)
 
 #include "atmel_nand_ecc.h"	/* Hardware ECC registers */
 
@@ -59,7 +59,7 @@
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout at91_oobinfo_large = {
+static struct nand_ecclayout atmel_oobinfo_large = {
 	.eccbytes = 4,
 	.eccpos = {60, 61, 62, 63},
 	.oobfree = {
@@ -72,7 +72,7 @@ static struct nand_ecclayout at91_oobinfo_large = {
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
-static struct nand_ecclayout at91_oobinfo_small = {
+static struct nand_ecclayout atmel_oobinfo_small = {
 	.eccbytes = 4,
 	.eccpos = {0, 1, 2, 3},
 	.oobfree = {
@@ -80,11 +80,11 @@ static struct nand_ecclayout at91_oobinfo_small = {
 	},
 };
 
-struct at91_nand_host {
+struct atmel_nand_host {
 	struct nand_chip	nand_chip;
 	struct mtd_info		mtd;
 	void __iomem		*io_base;
-	struct at91_nand_data	*board;
+	struct atmel_nand_data	*board;
 	struct device		*dev;
 	void __iomem		*ecc;
 };
@@ -92,7 +92,7 @@ struct at91_nand_host {
 /*
  * Enable NAND.
  */
-static void at91_nand_enable(struct at91_nand_host *host)
+static void atmel_nand_enable(struct atmel_nand_host *host)
 {
 	if (host->board->enable_pin)
 		gpio_set_value(host->board->enable_pin, 0);
@@ -101,7 +101,7 @@ static void at91_nand_enable(struct at91_nand_host *host)
 /*
  * Disable NAND.
  */
-static void at91_nand_disable(struct at91_nand_host *host)
+static void atmel_nand_disable(struct atmel_nand_host *host)
 {
 	if (host->board->enable_pin)
 		gpio_set_value(host->board->enable_pin, 1);
@@ -110,16 +110,16 @@ static void at91_nand_disable(struct at91_nand_host *host)
 /*
  * Hardware specific access to control-lines
  */
-static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_NCE)
-			at91_nand_enable(host);
+			atmel_nand_enable(host);
 		else
-			at91_nand_disable(host);
+			atmel_nand_disable(host);
 	}
 	if (cmd == NAND_CMD_NONE)
 		return;
@@ -133,10 +133,10 @@ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 /*
  * Read the Device Ready pin.
  */
-static int at91_nand_device_ready(struct mtd_info *mtd)
+static int atmel_nand_device_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 
 	return gpio_get_value(host->board->rdy_pin);
 }
@@ -144,7 +144,7 @@ static int at91_nand_device_ready(struct mtd_info *mtd)
 /*
  * write oob for small pages
  */
-static int at91_nand_write_oob_512(struct mtd_info *mtd,
+static int atmel_nand_write_oob_512(struct mtd_info *mtd,
 		struct nand_chip *chip, int page)
 {
 	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
@@ -172,7 +172,7 @@ static int at91_nand_write_oob_512(struct mtd_info *mtd,
 /*
  * read oob for small pages
  */
-static int at91_nand_read_oob_512(struct mtd_info *mtd,
+static int atmel_nand_read_oob_512(struct mtd_info *mtd,
 		struct nand_chip *chip,	int page, int sndcmd)
 {
 	if (sndcmd) {
@@ -192,11 +192,11 @@ static int at91_nand_read_oob_512(struct mtd_info *mtd,
  * dat:        raw data (unused)
  * ecc_code:   buffer for ECC
  */
-static int at91_nand_calculate(struct mtd_info *mtd,
+static int atmel_nand_calculate(struct mtd_info *mtd,
 		const u_char *dat, unsigned char *ecc_code)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 	uint32_t *eccpos = nand_chip->ecc.layout->eccpos;
 	unsigned int ecc_value;
 
@@ -207,7 +207,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
 	ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF;
 
 	/* get the last 2 ECC bytes */
-	ecc_value = ecc_readl(host->ecc, NPR) & AT91_ECC_NPARITY;
+	ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
 
 	ecc_code[eccpos[2]] = ecc_value & 0xFF;
 	ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF;
@@ -222,7 +222,7 @@ static int at91_nand_calculate(struct mtd_info *mtd,
  * chip:       nand chip info structure
  * buf:        buffer to store read data
  */
-static int at91_nand_read_page(struct mtd_info *mtd,
+static int atmel_nand_read_page(struct mtd_info *mtd,
 		struct nand_chip *chip, uint8_t *buf)
 {
 	int eccsize = chip->ecc.size;
@@ -281,11 +281,11 @@ static int at91_nand_read_page(struct mtd_info *mtd,
  *
  * Detect and correct a 1 bit error for a page
  */
-static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		u_char *read_ecc, u_char *isnull)
 {
 	struct nand_chip *nand_chip = mtd->priv;
-	struct at91_nand_host *host = nand_chip->priv;
+	struct atmel_nand_host *host = nand_chip->priv;
 	unsigned int ecc_status;
 	unsigned int ecc_word, ecc_bit;
 
@@ -293,43 +293,43 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
 	ecc_status = ecc_readl(host->ecc, SR);
 
 	/* if there's no error */
-	if (likely(!(ecc_status & AT91_ECC_RECERR)))
+	if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
 		return 0;
 
 	/* get error bit offset (4 bits) */
-	ecc_bit = ecc_readl(host->ecc, PR) & AT91_ECC_BITADDR;
+	ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
 	/* get word address (12 bits) */
-	ecc_word = ecc_readl(host->ecc, PR) & AT91_ECC_WORDADDR;
+	ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
 	ecc_word >>= 4;
 
 	/* if there are multiple errors */
-	if (ecc_status & AT91_ECC_MULERR) {
+	if (ecc_status & ATMEL_ECC_MULERR) {
 		/* check if it is a freshly erased block
 		 * (filled with 0xff) */
-		if ((ecc_bit == AT91_ECC_BITADDR)
-				&& (ecc_word == (AT91_ECC_WORDADDR >> 4))) {
+		if ((ecc_bit == ATMEL_ECC_BITADDR)
+				&& (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
 			/* the block has just been erased, return OK */
 			return 0;
 		}
 		/* it doesn't seems to be a freshly
 		 * erased block.
 		 * We can't correct so many errors */
-		dev_dbg(host->dev, "at91_nand : multiple errors detected."
+		dev_dbg(host->dev, "atmel_nand : multiple errors detected."
 				" Unable to correct.\n");
 		return -EIO;
 	}
 
 	/* if there's a single bit error : we can correct it */
-	if (ecc_status & AT91_ECC_ECCERR) {
+	if (ecc_status & ATMEL_ECC_ECCERR) {
 		/* there's nothing much to do here.
 		 * the bit error is on the ECC itself.
 		 */
-		dev_dbg(host->dev, "at91_nand : one bit error on ECC code."
+		dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
 				" Nothing to correct\n");
 		return 0;
 	}
 
-	dev_dbg(host->dev, "at91_nand : one bit error on data."
+	dev_dbg(host->dev, "atmel_nand : one bit error on data."
 			" (word offset in the page :"
 			" 0x%x bit offset : 0x%x)\n",
 			ecc_word, ecc_bit);
@@ -341,14 +341,14 @@ static int at91_nand_correct(struct mtd_info *mtd, u_char *dat,
 		/* 8 bits words */
 		dat[ecc_word] ^= (1 << ecc_bit);
 	}
-	dev_dbg(host->dev, "at91_nand : error corrected\n");
+	dev_dbg(host->dev, "atmel_nand : error corrected\n");
 	return 1;
 }
 
 /*
  * Enable HW ECC : unsused
  */
-static void at91_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", NULL };
@@ -357,9 +357,9 @@ static const char *part_probes[] = { "cmdlinepart", NULL };
 /*
  * Probe for the NAND device.
  */
-static int __init at91_nand_probe(struct platform_device *pdev)
+static int __init atmel_nand_probe(struct platform_device *pdev)
 {
-	struct at91_nand_host *host;
+	struct atmel_nand_host *host;
 	struct mtd_info *mtd;
 	struct nand_chip *nand_chip;
 	struct resource *regs;
@@ -372,21 +372,21 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 #endif
 
 	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL);
+	host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
 	if (!host) {
-		printk(KERN_ERR "at91_nand: failed to allocate device structure.\n");
+		printk(KERN_ERR "atmel_nand: failed to allocate device structure.\n");
 		return -ENOMEM;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource mem\n");
+		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
 		return -ENXIO;
 	}
 
 	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
 	if (host->io_base == NULL) {
-		printk(KERN_ERR "at91_nand: ioremap failed\n");
+		printk(KERN_ERR "atmel_nand: ioremap failed\n");
 		kfree(host);
 		return -EIO;
 	}
@@ -403,14 +403,14 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 	/* Set address of NAND IO lines */
 	nand_chip->IO_ADDR_R = host->io_base;
 	nand_chip->IO_ADDR_W = host->io_base;
-	nand_chip->cmd_ctrl = at91_nand_cmd_ctrl;
+	nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
 
 	if (host->board->rdy_pin)
-		nand_chip->dev_ready = at91_nand_device_ready;
+		nand_chip->dev_ready = atmel_nand_device_ready;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!regs && hard_ecc) {
-		printk(KERN_ERR "at91_nand: can't get I/O resource "
+		printk(KERN_ERR "atmel_nand: can't get I/O resource "
 				"regs\nFalling back on software ECC\n");
 	}
 
@@ -420,15 +420,15 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 	if (hard_ecc && regs) {
 		host->ecc = ioremap(regs->start, regs->end - regs->start + 1);
 		if (host->ecc == NULL) {
-			printk(KERN_ERR "at91_nand: ioremap failed\n");
+			printk(KERN_ERR "atmel_nand: ioremap failed\n");
 			res = -EIO;
 			goto err_ecc_ioremap;
 		}
 		nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME;
-		nand_chip->ecc.calculate = at91_nand_calculate;
-		nand_chip->ecc.correct = at91_nand_correct;
-		nand_chip->ecc.hwctl = at91_nand_hwctl;
-		nand_chip->ecc.read_page = at91_nand_read_page;
+		nand_chip->ecc.calculate = atmel_nand_calculate;
+		nand_chip->ecc.correct = atmel_nand_correct;
+		nand_chip->ecc.hwctl = atmel_nand_hwctl;
+		nand_chip->ecc.read_page = atmel_nand_read_page;
 		nand_chip->ecc.bytes = 4;
 		nand_chip->ecc.prepad = 0;
 		nand_chip->ecc.postpad = 0;
@@ -440,7 +440,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 		nand_chip->options |= NAND_BUSWIDTH_16;
 
 	platform_set_drvdata(pdev, host);
-	at91_nand_enable(host);
+	atmel_nand_enable(host);
 
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
@@ -463,22 +463,22 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 		/* set ECC page size and oob layout */
 		switch (mtd->writesize) {
 		case 512:
-			nand_chip->ecc.layout = &at91_oobinfo_small;
-			nand_chip->ecc.read_oob = at91_nand_read_oob_512;
-			nand_chip->ecc.write_oob = at91_nand_write_oob_512;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_528);
+			nand_chip->ecc.layout = &atmel_oobinfo_small;
+			nand_chip->ecc.read_oob = atmel_nand_read_oob_512;
+			nand_chip->ecc.write_oob = atmel_nand_write_oob_512;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
 			break;
 		case 1024:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_1056);
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
 			break;
 		case 2048:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_2112);
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
 			break;
 		case 4096:
-			nand_chip->ecc.layout = &at91_oobinfo_large;
-			ecc_writel(host->ecc, MR, AT91_ECC_PAGESIZE_4224);
+			nand_chip->ecc.layout = &atmel_oobinfo_large;
+			ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
 			break;
 		default:
 			/* page size not handled by HW ECC */
@@ -503,7 +503,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_MTD_PARTITIONS
 #ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd->name = "at91_nand";
+	mtd->name = "atmel_nand";
 	num_partitions = parse_mtd_partitions(mtd, part_probes,
 					      &partitions, 0);
 #endif
@@ -512,7 +512,7 @@ static int __init at91_nand_probe(struct platform_device *pdev)
 							 &num_partitions);
 
 	if ((!partitions) || (num_partitions == 0)) {
-		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
+		printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
 		res = ENXIO;
 		goto release;
 	}
@@ -534,7 +534,7 @@ out:
 	iounmap(host->ecc);
 
 err_ecc_ioremap:
-	at91_nand_disable(host);
+	atmel_nand_disable(host);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(host->io_base);
 	kfree(host);
@@ -544,14 +544,14 @@ err_ecc_ioremap:
 /*
  * Remove a NAND device.
  */
-static int __devexit at91_nand_remove(struct platform_device *pdev)
+static int __devexit atmel_nand_remove(struct platform_device *pdev)
 {
-	struct at91_nand_host *host = platform_get_drvdata(pdev);
+	struct atmel_nand_host *host = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = &host->mtd;
 
 	nand_release(mtd);
 
-	at91_nand_disable(host);
+	atmel_nand_disable(host);
 
 	iounmap(host->io_base);
 	iounmap(host->ecc);
@@ -560,31 +560,31 @@ static int __devexit at91_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_driver at91_nand_driver = {
-	.probe		= at91_nand_probe,
-	.remove		= at91_nand_remove,
+static struct platform_driver atmel_nand_driver = {
+	.probe		= atmel_nand_probe,
+	.remove		= atmel_nand_remove,
 	.driver		= {
-		.name	= "at91_nand",
+		.name	= "atmel_nand",
 		.owner	= THIS_MODULE,
 	},
 };
 
-static int __init at91_nand_init(void)
+static int __init atmel_nand_init(void)
 {
-	return platform_driver_register(&at91_nand_driver);
+	return platform_driver_register(&atmel_nand_driver);
 }
 
 
-static void __exit at91_nand_exit(void)
+static void __exit atmel_nand_exit(void)
 {
-	platform_driver_unregister(&at91_nand_driver);
+	platform_driver_unregister(&atmel_nand_driver);
 }
 
 
-module_init(at91_nand_init);
-module_exit(at91_nand_exit);
+module_init(atmel_nand_init);
+module_exit(atmel_nand_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Rick Bronson");
 MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
-MODULE_ALIAS("platform:at91_nand");
+MODULE_ALIAS("platform:atmel_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index 170db869aac..1ee7f993db1 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -11,26 +11,26 @@
 #ifndef ATMEL_NAND_ECC_H
 #define ATMEL_NAND_ECC_H
 
-#define AT91_ECC_CR		0x00			/* Control register */
-#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
+#define ATMEL_ECC_CR		0x00			/* Control register */
+#define		ATMEL_ECC_RST		(1 << 0)		/* Reset parity */
 
-#define AT91_ECC_MR		0x04			/* Mode register */
-#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-#define			AT91_ECC_PAGESIZE_528		(0)
-#define			AT91_ECC_PAGESIZE_1056		(1)
-#define			AT91_ECC_PAGESIZE_2112		(2)
-#define			AT91_ECC_PAGESIZE_4224		(3)
+#define ATMEL_ECC_MR		0x04			/* Mode register */
+#define		ATMEL_ECC_PAGESIZE	(3 << 0)		/* Page Size */
+#define			ATMEL_ECC_PAGESIZE_528		(0)
+#define			ATMEL_ECC_PAGESIZE_1056		(1)
+#define			ATMEL_ECC_PAGESIZE_2112		(2)
+#define			ATMEL_ECC_PAGESIZE_4224		(3)
 
-#define AT91_ECC_SR		0x08			/* Status register */
-#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
+#define ATMEL_ECC_SR		0x08			/* Status register */
+#define		ATMEL_ECC_RECERR		(1 << 0)		/* Recoverable Error */
+#define		ATMEL_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
+#define		ATMEL_ECC_MULERR		(1 << 2)		/* Multiple Errors */
 
-#define AT91_ECC_PR		0x0c			/* Parity register */
-#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
+#define ATMEL_ECC_PR		0x0c			/* Parity register */
+#define		ATMEL_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
+#define		ATMEL_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
 
-#define AT91_ECC_NPR		0x10			/* NParity register */
-#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
+#define ATMEL_ECC_NPR		0x10			/* NParity register */
+#define		ATMEL_ECC_NPARITY	(0xffff << 0)		/* NParity */
 
 #endif
-- 
cgit v1.2.3


From cc0c72e173db70a3a864994b05ebbe59b79b888f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:54 +0200
Subject: [MTD] [NAND] atmel_nand: Clean up and fix probe() error path
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This fixes several bugs in the atmel_nand_probe() error path, including
at least one memory leak.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/atmel_nand.c | 41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 675a82ca77f..325ce29f53f 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -371,6 +371,12 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	int num_partitions = 0;
 #endif
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
+		return -ENXIO;
+	}
+
 	/* Allocate memory for the device structure (and zero it) */
 	host = kzalloc(sizeof(struct atmel_nand_host), GFP_KERNEL);
 	if (!host) {
@@ -378,17 +384,11 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		printk(KERN_ERR "atmel_nand: can't get I/O resource mem\n");
-		return -ENXIO;
-	}
-
 	host->io_base = ioremap(mem->start, mem->end - mem->start + 1);
 	if (host->io_base == NULL) {
 		printk(KERN_ERR "atmel_nand: ioremap failed\n");
-		kfree(host);
-		return -EIO;
+		res = -EIO;
+		goto err_nand_ioremap;
 	}
 
 	mtd = &host->mtd;
@@ -446,14 +446,14 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		if (gpio_get_value(host->board->det_pin)) {
 			printk ("No SmartMedia card inserted.\n");
 			res = ENXIO;
-			goto out;
+			goto err_no_card;
 		}
 	}
 
 	/* first scan to find the device and get the page size */
 	if (nand_scan_ident(mtd, 1)) {
 		res = -ENXIO;
-		goto out;
+		goto err_scan_ident;
 	}
 
 	if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
@@ -498,7 +498,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	/* second phase scan */
 	if (nand_scan_tail(mtd)) {
 		res = -ENXIO;
-		goto out;
+		goto err_scan_tail;
 	}
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -514,7 +514,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 	if ((!partitions) || (num_partitions == 0)) {
 		printk(KERN_ERR "atmel_nand: No parititions defined, or unsupported device.\n");
 		res = ENXIO;
-		goto release;
+		goto err_no_partitions;
 	}
 
 	res = add_mtd_partitions(mtd, partitions, num_partitions);
@@ -526,17 +526,19 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 		return res;
 
 #ifdef CONFIG_MTD_PARTITIONS
-release:
+err_no_partitions:
 #endif
 	nand_release(mtd);
-
-out:
-	iounmap(host->ecc);
-
-err_ecc_ioremap:
+err_scan_tail:
+err_scan_ident:
+err_no_card:
 	atmel_nand_disable(host);
 	platform_set_drvdata(pdev, NULL);
+	if (host->ecc)
+		iounmap(host->ecc);
+err_ecc_ioremap:
 	iounmap(host->io_base);
+err_nand_ioremap:
 	kfree(host);
 	return res;
 }
@@ -553,8 +555,9 @@ static int __devexit atmel_nand_remove(struct platform_device *pdev)
 
 	atmel_nand_disable(host);
 
+	if (host->ecc)
+		iounmap(host->ecc);
 	iounmap(host->io_base);
-	iounmap(host->ecc);
 	kfree(host);
 
 	return 0;
-- 
cgit v1.2.3


From 984290ded4ee3834ca913fe361afe3bf625cd9c0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?H=C3=A5vard=20Skinnemoen?= <haavard.skinnemoen@atmel.com>
Date: Fri, 6 Jun 2008 18:04:57 +0200
Subject: [MTD] [NAND] atmel_nand: make available on AVR32
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Make the atmel_nand driver selectable on AVR32, and update the Kconfig
help text to reflect this.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/Kconfig | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index cdd2952c153..d8c0d8698b4 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -272,18 +272,18 @@ config MTD_NAND_CS553X
 	  If you say "m", the module will be called "cs553x_nand.ko".
 
 config MTD_NAND_ATMEL
-	bool "Support for NAND Flash / SmartMedia on AT91"
-	depends on ARCH_AT91
+	bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+	depends on ARCH_AT91 || AVR32
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
-	  on Atmel AT91 processors.
+	  on Atmel AT91 and AVR32 processors.
 choice
-	prompt "ECC management for NAND Flash / SmartMedia on AT91"
+	prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
 	depends on MTD_NAND_ATMEL
 
 config MTD_NAND_ATMEL_ECC_HW
 	bool "Hardware ECC"
-	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260
+	depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
 	help
 	  Use hardware ECC instead of software ECC when the chip
 	  supports it.
-- 
cgit v1.2.3


From 90574d0a4d4b73308ae54a2a57a4f3f1fa98e984 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sat, 7 Jun 2008 08:49:00 +0100
Subject: [MTD] [NAND] Fix checkpatch warnings which showed up when
 atmel_nand.c moved

Some of them, at least.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---
 drivers/mtd/nand/atmel_nand.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 325ce29f53f..50700ab5a57 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -29,8 +29,8 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/gpio.h>
-#include <asm/io.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
 
 #include <asm/arch/board.h>
 
@@ -444,7 +444,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	if (host->board->det_pin) {
 		if (gpio_get_value(host->board->det_pin)) {
-			printk ("No SmartMedia card inserted.\n");
+			printk("No SmartMedia card inserted.\n");
 			res = ENXIO;
 			goto err_no_card;
 		}
-- 
cgit v1.2.3


From 72289824423655e67993c25c91a7a86a34917209 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 3 Jul 2008 23:54:42 -0700
Subject: [MTD] m25p80: fix bug - ATmel spi flash fails to be copied to

Atmel serial flash tends to power up with the protection status bits set.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4089

[michael.hennerich@analog.com: remove duplicate code]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/m25p80.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'drivers')

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index b402269301f..b35c3333e21 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -33,6 +33,7 @@
 /* Flash opcodes. */
 #define	OPCODE_WREN		0x06	/* Write enable */
 #define	OPCODE_RDSR		0x05	/* Read status register */
+#define	OPCODE_WRSR		0x01	/* Write status register 1 byte */
 #define	OPCODE_NORM_READ	0x03	/* Read data bytes (low frequency) */
 #define	OPCODE_FAST_READ	0x0b	/* Read data bytes (high frequency) */
 #define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
@@ -112,6 +113,17 @@ static int read_sr(struct m25p *flash)
 	return val;
 }
 
+/*
+ * Write status register 1 byte
+ * Returns negative if error occurred.
+ */
+static int write_sr(struct m25p *flash, u8 val)
+{
+	flash->command[0] = OPCODE_WRSR;
+	flash->command[1] = val;
+
+	return spi_write(flash->spi, flash->command, 2);
+}
 
 /*
  * Set write enable latch with Write Enable command.
@@ -589,6 +601,16 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	mutex_init(&flash->lock);
 	dev_set_drvdata(&spi->dev, flash);
 
+	/*
+	 * Atmel serial flash tend to power up
+	 * with the software protection bits set
+	 */
+
+	if (info->jedec_id >> 16 == 0x1f) {
+		write_enable(flash);
+		write_sr(flash, 0);
+	}
+
 	if (data && data->name)
 		flash->mtd.name = data->name;
 	else
-- 
cgit v1.2.3


From 5f6928378b165c4b0d57a711e1c1eb925ad33846 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Thu, 3 Jul 2008 23:40:13 -0700
Subject: [MTD] mtdchar.c silence sparse warning

The copy_to_user was casting away the address space to get the offset of
the length member.  Use offsetof() instead and add it to the void __user
*argp.

drivers/mtd/mtdchar.c:527:23: warning: cast removes address space of expression
drivers/mtd/mtdchar.c:527:23: warning: incorrect type in argument 1 (different address spaces)
drivers/mtd/mtdchar.c:527:23:    expected void [noderef] <asn:1>*to
drivers/mtd/mtdchar.c:527:23:    got unsigned int *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdchar.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 4b3156f9b36..5fc2c4216c0 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -479,6 +479,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 	{
 		struct mtd_oob_buf buf;
 		struct mtd_oob_ops ops;
+		struct mtd_oob_buf __user *user_buf = argp;
 	        uint32_t retlen;
 
 		if(!(file->f_mode & 2))
@@ -522,8 +523,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 		if (ops.oobretlen > 0xFFFFFFFFU)
 			ret = -EOVERFLOW;
 		retlen = ops.oobretlen;
-		if (copy_to_user(&((struct mtd_oob_buf *)argp)->length,
-				 &retlen, sizeof(buf.length)))
+		if (copy_to_user(&user_buf->length, &retlen, sizeof(buf.length)))
 			ret = -EFAULT;
 
 		kfree(ops.oobbuf);
-- 
cgit v1.2.3


From 175428b2b3eeacf90dcc171d5915d6b4dc86e917 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Thu, 3 Jul 2008 23:40:14 -0700
Subject: [MTD] mtdchar.c remove shadowed variable warnings

Use einfo, oinfo for the inner erase_info and otp_info structs used in
individual case statements.

drivers/mtd/mtdchar.c:582:26: warning: symbol 'info' shadows an earlier one
drivers/mtd/mtdchar.c:380:23: originally declared here
drivers/mtd/mtdchar.c:596:26: warning: symbol 'info' shadows an earlier one
drivers/mtd/mtdchar.c:380:23: originally declared here
drivers/mtd/mtdchar.c:704:19: warning: symbol 'info' shadows an earlier one
drivers/mtd/mtdchar.c:380:23: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdchar.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 5fc2c4216c0..f5061fe72e4 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -577,29 +577,29 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case MEMLOCK:
 	{
-		struct erase_info_user info;
+		struct erase_info_user einfo;
 
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
 		if (!mtd->lock)
 			ret = -EOPNOTSUPP;
 		else
-			ret = mtd->lock(mtd, info.start, info.length);
+			ret = mtd->lock(mtd, einfo.start, einfo.length);
 		break;
 	}
 
 	case MEMUNLOCK:
 	{
-		struct erase_info_user info;
+		struct erase_info_user einfo;
 
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&einfo, argp, sizeof(einfo)))
 			return -EFAULT;
 
 		if (!mtd->unlock)
 			ret = -EOPNOTSUPP;
 		else
-			ret = mtd->unlock(mtd, info.start, info.length);
+			ret = mtd->unlock(mtd, einfo.start, einfo.length);
 		break;
 	}
 
@@ -699,15 +699,15 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case OTPLOCK:
 	{
-		struct otp_info info;
+		struct otp_info oinfo;
 
 		if (mfi->mode != MTD_MODE_OTP_USER)
 			return -EINVAL;
-		if (copy_from_user(&info, argp, sizeof(info)))
+		if (copy_from_user(&oinfo, argp, sizeof(oinfo)))
 			return -EFAULT;
 		if (!mtd->lock_user_prot_reg)
 			return -EOPNOTSUPP;
-		ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+		ret = mtd->lock_user_prot_reg(mtd, oinfo.start, oinfo.length);
 		break;
 	}
 #endif
-- 
cgit v1.2.3


From 23a346ca4a5a6f50f81062456af955155f68e313 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Thu, 3 Jul 2008 23:40:16 -0700
Subject: [MTD] [NAND] atmel_nand speedup via {read,write}s{b,w}()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This uses __raw_{read,write}s{b,w}() primitives to access data on NAND
chips for more efficient I/O.

On an arm926 with memory clocked at 100 MHz, this reduced the elapsed time
for a 64 MiB read by 16%.  ("dd" /dev/mtd0 to /dev/null, with an 8-bit
NAND using hardware ECC and 128KiB blocksize.)

Also some minor section tweaks:

  - Use platform_driver_probe() so no pointer to probe() lingers
    after that code has been removed at run-time.

  - Use __exit and __exit_p so the remove() code will normally be
    removed by the linker.

Since these buffer read/write calls are new, this increases the runtime
code footprint (by 88 bytes on my build, after the section tweaks).

[haavard.skinnemoen@atmel.com: rebase onto atmel_nand rename]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/atmel_nand.c | 46 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 41 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 50700ab5a57..4814fc9b237 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -141,6 +141,37 @@ static int atmel_nand_device_ready(struct mtd_info *mtd)
 	return gpio_get_value(host->board->rdy_pin);
 }
 
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+	struct nand_chip	*nand_chip = mtd->priv;
+
+	__raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
 /*
  * write oob for small pages
  */
@@ -436,8 +467,14 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
 
 	nand_chip->chip_delay = 20;		/* 20us command delay time */
 
-	if (host->board->bus_width_16)		/* 16-bit bus width */
+	if (host->board->bus_width_16) {	/* 16-bit bus width */
 		nand_chip->options |= NAND_BUSWIDTH_16;
+		nand_chip->read_buf = atmel_read_buf16;
+		nand_chip->write_buf = atmel_write_buf16;
+	} else {
+		nand_chip->read_buf = atmel_read_buf;
+		nand_chip->write_buf = atmel_write_buf;
+	}
 
 	platform_set_drvdata(pdev, host);
 	atmel_nand_enable(host);
@@ -546,7 +583,7 @@ err_nand_ioremap:
 /*
  * Remove a NAND device.
  */
-static int __devexit atmel_nand_remove(struct platform_device *pdev)
+static int __exit atmel_nand_remove(struct platform_device *pdev)
 {
 	struct atmel_nand_host *host = platform_get_drvdata(pdev);
 	struct mtd_info *mtd = &host->mtd;
@@ -564,8 +601,7 @@ static int __devexit atmel_nand_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver atmel_nand_driver = {
-	.probe		= atmel_nand_probe,
-	.remove		= atmel_nand_remove,
+	.remove		= __exit_p(atmel_nand_remove),
 	.driver		= {
 		.name	= "atmel_nand",
 		.owner	= THIS_MODULE,
@@ -574,7 +610,7 @@ static struct platform_driver atmel_nand_driver = {
 
 static int __init atmel_nand_init(void)
 {
-	return platform_driver_register(&atmel_nand_driver);
+	return platform_driver_probe(&atmel_nand_driver, atmel_nand_probe);
 }
 
 
-- 
cgit v1.2.3


From d6248fddf717041f25781050e6392cc76525272d Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Thu, 3 Jul 2008 23:40:18 -0700
Subject: [MTD] [NAND] atmel_nand: Work around AT32AP7000 ECC erratum
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The ALE signal isn't correctly wired up to the ECC controller on the
AP7000, so it starts calculating ECC during the address cycles.

Work around this by resetting the ECC controller between the address and
data cycles.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/atmel_nand.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 4814fc9b237..99aec46e214 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -33,6 +33,7 @@
 #include <linux/io.h>
 
 #include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
 
 #ifdef CONFIG_MTD_NAND_ATMEL_ECC_HW
 #define hard_ecc	1
@@ -264,6 +265,19 @@ static int atmel_nand_read_page(struct mtd_info *mtd,
 	uint8_t *ecc_pos;
 	int stat;
 
+	/*
+	 * Errata: ALE is incorrectly wired up to the ECC controller
+	 * on the AP7000, so it will include the address cycles in the
+	 * ECC calculation.
+	 *
+	 * Workaround: Reset the parity registers before reading the
+	 * actual data.
+	 */
+	if (cpu_is_at32ap7000()) {
+		struct atmel_nand_host *host = chip->priv;
+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+	}
+
 	/* read the page */
 	chip->read_buf(mtd, p, eccsize);
 
@@ -377,9 +391,16 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 }
 
 /*
- * Enable HW ECC : unsused
+ * Enable HW ECC : unused on most chips
  */
-static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) { ; }
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+	if (cpu_is_at32ap7000()) {
+		struct nand_chip *nand_chip = mtd->priv;
+		struct atmel_nand_host *host = nand_chip->priv;
+		ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+	}
+}
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", NULL };
-- 
cgit v1.2.3


From bd5a43822b438f297f4088f1cfd3514e32e56328 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 3 Jul 2008 23:40:19 -0700
Subject: [MTD] [NAND] atmel_nand can be modular
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There's no reason to prevent the Atmel NAND driver from
building as a module.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index d8c0d8698b4..71406e51785 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -272,7 +272,7 @@ config MTD_NAND_CS553X
 	  If you say "m", the module will be called "cs553x_nand.ko".
 
 config MTD_NAND_ATMEL
-	bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+	tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
 	depends on ARCH_AT91 || AVR32
 	help
 	  Enables support for NAND Flash / Smart Media Card interface
-- 
cgit v1.2.3


From 452db2724351ff3d9416a183a7955e00ab4e6ab4 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 27 Jun 2008 23:04:04 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND
 chips

For large page chips, nand_bbt is looking into OOB area, and checking
for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
reserved for bbt means.

But ELBC driver is specifying ecclayout so that oobfree area starts at
offset 1, so only one byte left for the bbt purposes.

This causes problems with any OOB users, namely JFFS2: after first mount
JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:

  OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

And on the next boot, NAND core will rescan for bad blocks, then will
see "0xff 0x19" pattern, and will mark all blocks as bad ones.

To fix the issue we should implement our own bad block pattern: just one
byte at OOB start. Though, this will work only for x8 chips. For x16
chips two bytes must be checked. Since ELBC driver does not support x16
NANDs (yet), we're safe for now.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 1b06d29dd06..99dc2be620a 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -116,6 +116,20 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
 	.oobavail = 48,
 };
 
+/*
+ * fsl_elbc_oob_lp_eccm* specify that LP NAND's OOB free area starts at offset
+ * 1, so we have to adjust bad block pattern. This pattern should be used for
+ * x8 chips only. So far hardware does not support x16 chips anyway.
+ */
+static u8 scan_ff_pattern[] = { 0xff, };
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 1,
+	.pattern = scan_ff_pattern,
+};
+
 /*=================================*/
 
 /*
@@ -687,6 +701,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 			chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
 			                   &fsl_elbc_oob_lp_eccm1 :
 			                   &fsl_elbc_oob_lp_eccm0;
+			chip->badblock_pattern = &largepage_memorybased;
 			mtd->ecclayout = chip->ecc.layout;
 			mtd->oobavail = chip->ecc.layout->oobavail;
 		}
-- 
cgit v1.2.3


From ec6e0ea3bdf82ee9761d324c011c3627821f7410 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 27 Jun 2008 23:04:13 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT

This patch implements support for flash-based BBT for chips working
through ELBC NAND controller, so that NAND core will not have to re-scan
for bad blocks on every boot.

Because ELBC controller may provide HW-generated ECCs we should adjust
bbt pattern and bbt version positions in the OOB free area.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 99dc2be620a..5f1bc5ea2a7 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -130,6 +130,34 @@ static struct nand_bbt_descr largepage_memorybased = {
 	.pattern = scan_ff_pattern,
 };
 
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+		   NAND_BBT_2BIT | NAND_BBT_VERSION,
+	.offs =	11,
+	.len = 4,
+	.veroffs = 15,
+	.maxblocks = 4,
+	.pattern = mirror_pattern,
+};
+
 /*=================================*/
 
 /*
@@ -767,8 +795,12 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->cmdfunc = fsl_elbc_cmdfunc;
 	chip->waitfunc = fsl_elbc_wait;
 
+	chip->bbt_td = &bbt_main_descr;
+	chip->bbt_md = &bbt_mirror_descr;
+
 	/* set up nand options */
-	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
+	chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR |
+			NAND_USE_FLASH_BBT;
 
 	chip->controller = &ctrl->controller;
 	chip->priv = priv;
-- 
cgit v1.2.3


From 0acf944c6853813ed19cdf46d4042a77dd878ab5 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 27 Jun 2008 23:04:20 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups

This patch deletes oobavail assignments, they're calculated by the nand
core code in nand_scan_tail, plus current oobavail values are wrong for
the LP NANDs.

Also remove mtd->ecclayout and mtd->oobavail assignments, mtd core
handles this all by itself.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 5f1bc5ea2a7..d6d1ff55c4e 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -89,7 +89,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
 	.eccbytes = 3,
 	.eccpos = {6, 7, 8},
 	.oobfree = { {0, 5}, {9, 7} },
-	.oobavail = 12,
 };
 
 /* Small Page FLASH with FMR[ECCM] = 1 */
@@ -97,7 +96,6 @@ static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
 	.eccbytes = 3,
 	.eccpos = {8, 9, 10},
 	.oobfree = { {0, 5}, {6, 2}, {11, 5} },
-	.oobavail = 12,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 0 */
@@ -105,7 +103,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
 	.eccbytes = 12,
 	.eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
 	.oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
-	.oobavail = 48,
 };
 
 /* Large Page FLASH with FMR[ECCM] = 1 */
@@ -113,7 +110,6 @@ static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
 	.eccbytes = 12,
 	.eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
 	.oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
-	.oobavail = 48,
 };
 
 /*
@@ -730,8 +726,6 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 			                   &fsl_elbc_oob_lp_eccm1 :
 			                   &fsl_elbc_oob_lp_eccm0;
 			chip->badblock_pattern = &largepage_memorybased;
-			mtd->ecclayout = chip->ecc.layout;
-			mtd->oobavail = chip->ecc.layout->oobavail;
 		}
 	} else {
 		dev_err(ctrl->dev,
-- 
cgit v1.2.3


From 6f40470e745693ee4ad85edb441b0aad5cae3f00 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 9 Jul 2008 14:09:20 +0100
Subject: [MTD] [MAPS] Remove the bast-flash driver.

Remove the Simtec BAST flash driver as this has been replaced by using
the platform flash driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/maps/Kconfig      |  18 ----
 drivers/mtd/maps/Makefile     |   1 -
 drivers/mtd/maps/bast-flash.c | 224 ------------------------------------------
 3 files changed, 243 deletions(-)
 delete mode 100644 drivers/mtd/maps/bast-flash.c

(limited to 'drivers')

diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index d2d339a7598..ef1e29ea5a2 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -556,24 +556,6 @@ config MTD_DMV182
         help
           Map driver for Dy-4 SVME/DMV-182 board.
 
-config MTD_BAST
-	tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
-	depends on ARCH_BAST || MACH_VR1000
-	select MTD_PARTITIONS
-	select MTD_MAP_BANK_WIDTH_16
-	select MTD_JEDECPROBE
-	help
-	  Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
-	  Thorcom VR1000
-
-	  Note, this driver *cannot* over-ride the WP link on the
-	  board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
-	int "Maximum size for BAST flash area (MiB)"
-	depends on MTD_BAST
-	default "4"
-
 config MTD_SHARP_SL
 	tristate "ROM mapped on Sharp SL Series"
 	depends on ARCH_PXA
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index f3b0c595166..b29ea546065 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -9,7 +9,6 @@ endif
 # Chip mappings
 obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
-obj-$(CONFIG_MTD_BAST)		+= bast-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
deleted file mode 100644
index ca541488034..00000000000
--- a/drivers/mtd/maps/bast-flash.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* linux/drivers/mtd/maps/bast-flash.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
- *
- * Changelog:
- *	20-Sep-2004  BJD  Initial version
- *	17-Jan-2005  BJD  Add whole device if no partitions found
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
-
-#ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
-#else
-#define AREA_MAXSIZE (32 * SZ_1M)
-#endif
-
-#define PFX "bast-flash: "
-
-struct bast_flash_info {
-	struct mtd_info		*mtd;
-	struct map_info		 map;
-	struct mtd_partition	*partitions;
-	struct resource		*area;
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static void bast_flash_setrw(int to)
-{
-	unsigned int val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	val = __raw_readb(BAST_VA_CTRL3);
-
-	if (to)
-		val |= BAST_CPLD_CTRL3_ROMWEN;
-	else
-		val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-	pr_debug("new cpld ctrl3=%02x\n", val);
-
-	__raw_writeb(val, BAST_VA_CTRL3);
-	local_irq_restore(flags);
-}
-
-static int bast_flash_remove(struct platform_device *pdev)
-{
-	struct bast_flash_info *info = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-
-	if (info == NULL)
-		return 0;
-
-	if (info->map.virt != NULL)
-		iounmap(info->map.virt);
-
-	if (info->mtd) {
-		del_mtd_partitions(info->mtd);
-		map_destroy(info->mtd);
-	}
-
-	kfree(info->partitions);
-
-	if (info->area) {
-		release_resource(info->area);
-		kfree(info->area);
-	}
-
-	kfree(info);
-
-	return 0;
-}
-
-static int bast_flash_probe(struct platform_device *pdev)
-{
-	struct bast_flash_info *info;
-	struct resource *res;
-	int err = 0;
-
-	info = kmalloc(sizeof(*info), GFP_KERNEL);
-	if (info == NULL) {
-		printk(KERN_ERR PFX "no memory for flash info\n");
-		err = -ENOMEM;
-		goto exit_error;
-	}
-
-	memzero(info, sizeof(*info));
-	platform_set_drvdata(pdev, info);
-
-	res = pdev->resource;  /* assume that the flash has one resource */
-
-	info->map.phys = res->start;
-	info->map.size = res->end - res->start + 1;
-	info->map.name = pdev->dev.bus_id;
-	info->map.bankwidth = 2;
-
-	if (info->map.size > AREA_MAXSIZE)
-		info->map.size = AREA_MAXSIZE;
-
-	pr_debug("%s: area %08lx, size %ld\n", __func__,
-		 info->map.phys, info->map.size);
-
-	info->area = request_mem_region(res->start, info->map.size,
-					pdev->name);
-	if (info->area == NULL) {
-		printk(KERN_ERR PFX "cannot reserve flash memory region\n");
-		err = -ENOENT;
-		goto exit_error;
-	}
-
-	info->map.virt = ioremap(res->start, info->map.size);
-	pr_debug("%s: virt at %08x\n", __func__, (int)info->map.virt);
-
-	if (info->map.virt == 0) {
-		printk(KERN_ERR PFX "failed to ioremap() region\n");
-		err = -EIO;
-		goto exit_error;
-	}
-
-	simple_map_init(&info->map);
-
-	/* enable the write to the flash area */
-
-	bast_flash_setrw(1);
-
-	/* probe for the device(s) */
-
-	info->mtd = do_map_probe("jedec_probe", &info->map);
-	if (info->mtd == NULL)
-		info->mtd = do_map_probe("cfi_probe", &info->map);
-
-	if (info->mtd == NULL) {
-		printk(KERN_ERR PFX "map_probe() failed\n");
-		err = -ENXIO;
-		goto exit_error;
-	}
-
-	/* mark ourselves as the owner */
-	info->mtd->owner = THIS_MODULE;
-
-	err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
-	if (err > 0) {
-		err = add_mtd_partitions(info->mtd, info->partitions, err);
-		if (err)
-			printk(KERN_ERR PFX "cannot add/parse partitions\n");
-	} else {
-		err = add_mtd_device(info->mtd);
-	}
-
-	if (err == 0)
-		return 0;
-
-	/* fall through to exit error */
-
- exit_error:
-	bast_flash_remove(pdev);
-	return err;
-}
-
-static struct platform_driver bast_flash_driver = {
-	.probe		= bast_flash_probe,
-	.remove		= bast_flash_remove,
-	.driver		= {
-		.name	= "bast-nor",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init bast_flash_init(void)
-{
-	printk("BAST NOR-Flash Driver, (c) 2004 Simtec Electronics\n");
-	return platform_driver_register(&bast_flash_driver);
-}
-
-static void __exit bast_flash_exit(void)
-{
-	platform_driver_unregister(&bast_flash_driver);
-}
-
-module_init(bast_flash_init);
-module_exit(bast_flash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("BAST MTD Map driver");
-MODULE_ALIAS("platform:bast-nor");
-- 
cgit v1.2.3


From f63af11ddb508ce7b2a270515244d145248cad7f Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Thu, 10 Jul 2008 16:14:18 -0500
Subject: [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers

Such a hardcoded address can cause a checkstop or machine check if
the driver is in the kernel but the address is not acknowledged.

Both drivers allow an address to be specified as either a module
parameter or config option.   Any future powerpc board should either
use one of these methods or find the address in the device tree.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/devices/docprobe.c | 2 --
 drivers/mtd/nand/diskonchip.c  | 2 --
 2 files changed, 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 6e5d811ae83..6e62922942b 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -76,8 +76,6 @@ static unsigned long __initdata doc_locations[] = {
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-	0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index cd4393ce256..765d4f0f7c8 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -52,8 +52,6 @@ static unsigned long __initdata doc_locations[] = {
 	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
-#elif defined(__PPC__)
-	0xe4000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
-- 
cgit v1.2.3


From 3a3688b6af103e2c86a7cfc2050988655e184ecc Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 10 Jul 2008 13:37:08 +0200
Subject: [MTD] [NOR] gen_probe: No debug message when debugging is disabled

Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message
is only printed when debugging is enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: John stoffel <john@stoffel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/chips/gen_probe.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c
index e53a58ae384..f061885b281 100644
--- a/drivers/mtd/chips/gen_probe.c
+++ b/drivers/mtd/chips/gen_probe.c
@@ -70,8 +70,8 @@ static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chi
 	   interleave and device type, etc. */
 	if (!genprobe_new_chip(map, cp, &cfi)) {
 		/* The probe didn't like it */
-		printk(KERN_DEBUG "%s: Found no %s device at location zero\n",
-		       cp->name, map->name);
+		pr_debug("%s: Found no %s device at location zero\n",
+			 cp->name, map->name);
 		return NULL;
 	}
 
-- 
cgit v1.2.3


From 36560d255b017dbcaefbf0f8fee7ad4dd1f0fe0a Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 8 Jul 2008 17:09:03 +0100
Subject: [MTD] Fix const assignment in the MTD command line partitioning
 driver

Fix const to non-const pointer assignment in the MTD command line partitioning
driver.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/cmdlinepart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c
index 68782ab2f0d..71bc07f149b 100644
--- a/drivers/mtd/cmdlinepart.c
+++ b/drivers/mtd/cmdlinepart.c
@@ -306,7 +306,7 @@ static int parse_cmdline_partitions(struct mtd_info *master,
 	unsigned long offset;
 	int i;
 	struct cmdline_mtd_partition *part;
-	char *mtd_id = master->name;
+	const char *mtd_id = master->name;
 
 	/* parse command line */
 	if (!cmdline_parsed)
-- 
cgit v1.2.3


From 55679df30dfa37886cd9e22d8dea0e6974a552df Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Mon, 14 Jul 2008 19:20:37 +0400
Subject: [MTD] [NAND] fsl_elbc_nand: fix section mismatch with
 CONFIG_MTD_OF_PARTS=y

With CONFIG_MTD_OF_PARTS=y I'm getting this new section mismatch in reference
from the function fsl_elbc_chip_probe() to the function
.devinit.text:of_mtd_parse_partitions()

This patch fixes the mismatch by providing __devinit annotation to the
fsl_elbc_chip_probe() function.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-By: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index d6d1ff55c4e..9dff51351f4 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -836,8 +836,8 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 	return 0;
 }
 
-static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
-                               struct device_node *node)
+static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+					 struct device_node *node)
 {
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	struct fsl_elbc_mtd *priv;
-- 
cgit v1.2.3


From 998453fbf2e0709bf65ac419718ad284401b2b4f Mon Sep 17 00:00:00 2001
From: Alexey Korolev <akorolev@infradead.org>
Date: Wed, 16 Jul 2008 15:28:56 +0100
Subject: [MTD] [NOR] Fix -ETIMEO errors in CFI driver

Existing CFI driver has problems with excessive writes during erase.
If CFI driver does many writes during one erase cycle we may face the
messages with -ETIMEO error on erase operation.  It may cause the
following data corruption and kernel panics.

The reason of the issue is related to specifics of suspend operation:
if we write to flash during erase, suspend operation will cost some time
to erase procedure (for P30 it could be significant). In current version of
cfi driver the problem of many suspends is partially workarounded by adding
some time reserv to any operation (8xerase_time) but if we have many writes
during one erase the problem appears.

This patch detects the suspend and resets timer if suspend occured. It
has been well verified on different chips. No problems were found.
Could you please include the patch as it is simple and fixes bad issue.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/chips/cfi_cmdset_0001.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 324ff82a3cd..5f1b472137a 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1149,7 +1149,7 @@ static int inval_cache_and_wait_for_operation(
 	struct cfi_private *cfi = map->fldrv_priv;
 	map_word status, status_OK = CMD(0x80);
 	int chip_state = chip->state;
-	unsigned int timeo, sleep_time;
+	unsigned int timeo, sleep_time, reset_timeo;
 
 	spin_unlock(chip->mutex);
 	if (inval_len)
@@ -1160,6 +1160,7 @@ static int inval_cache_and_wait_for_operation(
 	timeo = chip_op_time * 8;
 	if (!timeo)
 		timeo = 500000;
+	reset_timeo = timeo;
 	sleep_time = chip_op_time / 2;
 
 	for (;;) {
@@ -1201,6 +1202,12 @@ static int inval_cache_and_wait_for_operation(
 			remove_wait_queue(&chip->wq, &wait);
 			spin_lock(chip->mutex);
 		}
+		if (chip->erase_suspended || chip->write_suspended)  {
+			/* Suspend has occured while sleep: reset timeout */
+			timeo = reset_timeo;
+			chip->erase_suspended = 0;
+			chip->write_suspended = 0;
+		}
 	}
 
 	/* Done and happy. */
-- 
cgit v1.2.3


From 7b2491911540e4904498622fbee2e1a9e3120d2f Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <rjarzmik@free.fr>
Date: Tue, 22 Jul 2008 09:39:00 +0200
Subject: [MTD] physmap: Fix suspend/resume/shutdown bugs.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Don't call suspend/resume functions if they have not been
defined.

Signed-off-by: Robert Jarzmik <rjarzmik@free.fr>
Acked-By: Jörn Engel <joern@logfs.org>
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/maps/physmap.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 1f6b9066b63..7c8cdf49deb 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -201,7 +201,8 @@ static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		ret |= info->mtd[i]->suspend(info->mtd[i]);
+		if (info->mtd[i]->suspend)
+			ret |= info->mtd[i]->suspend(info->mtd[i]);
 
 	return ret;
 }
@@ -212,7 +213,8 @@ static int physmap_flash_resume(struct platform_device *dev)
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		info->mtd[i]->resume(info->mtd[i]);
+		if (info->mtd[i]->resume)
+			info->mtd[i]->resume(info->mtd[i]);
 
 	return 0;
 }
@@ -223,8 +225,9 @@ static void physmap_flash_shutdown(struct platform_device *dev)
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->suspend(info->mtd[i]) == 0)
-			info->mtd[i]->resume(info->mtd[i]);
+		if (info->mtd[i]->suspend && info->mtd[i]->resume)
+			if (info->mtd[i]->suspend(info->mtd[i]) == 0)
+				info->mtd[i]->resume(info->mtd[i]);
 }
 #else
 #define physmap_flash_suspend NULL
-- 
cgit v1.2.3


From 4b5e33a7bf185c8d8568a807d9805fb155bcedd9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Tue, 22 Jul 2008 09:39:01 +0200
Subject: [MTD] physmap: resume already suspended chips on failure to suspend
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A nice side effect of this patch is that the return value of
physmap_flash_suspend in the error path is the value of the first failing
suspend callback and not the bitwise OR of all of them.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/maps/physmap.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 7c8cdf49deb..42d844f8f6b 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -201,8 +201,19 @@ static int physmap_flash_suspend(struct platform_device *dev, pm_message_t state
 	int i;
 
 	for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
-		if (info->mtd[i]->suspend)
-			ret |= info->mtd[i]->suspend(info->mtd[i]);
+		if (info->mtd[i]->suspend) {
+			ret = info->mtd[i]->suspend(info->mtd[i]);
+			if (ret)
+				goto fail;
+		}
+
+	return 0;
+fail:
+	for (--i; i >= 0; --i)
+		if (info->mtd[i]->suspend) {
+			BUG_ON(!info->mtd[i]->resume);
+			info->mtd[i]->resume(info->mtd[i]);
+		}
 
 	return ret;
 }
-- 
cgit v1.2.3


From 7788ba71a6046de1b70e7dd45ed0bc5768a4bbd9 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:00:18 +0900
Subject: [MTD][MTDPART] Seperate main loop from per-partition code in
 add_mtd_partition
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

add_mtd_partition was a 150+ line monster consisting mostly of a single
loop.  Seperate the loop from most of the body.  Now it should be
obvious which variables are carried around from iteration to iteration.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 324 ++++++++++++++++++++++++++------------------------
 1 file changed, 166 insertions(+), 158 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 56a760a736a..45c6f32b0bf 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -313,6 +313,170 @@ int del_mtd_partitions(struct mtd_info *master)
 	return 0;
 }
 
+static struct mtd_part *add_one_partition(struct mtd_info *master,
+		const struct mtd_partition *part, int partno,
+		u_int32_t cur_offset)
+{
+	struct mtd_part *slave;
+
+	/* allocate the partition structure */
+	slave = kzalloc (sizeof(*slave), GFP_KERNEL);
+	if (!slave) {
+		printk("memory allocation error while creating partitions for \"%s\"\n",
+			master->name);
+		del_mtd_partitions(master);
+		return NULL;
+	}
+	list_add(&slave->list, &mtd_partitions);
+
+	/* set up the MTD object for this partition */
+	slave->mtd.type = master->type;
+	slave->mtd.flags = master->flags & ~part->mask_flags;
+	slave->mtd.size = part->size;
+	slave->mtd.writesize = master->writesize;
+	slave->mtd.oobsize = master->oobsize;
+	slave->mtd.oobavail = master->oobavail;
+	slave->mtd.subpage_sft = master->subpage_sft;
+
+	slave->mtd.name = part->name;
+	slave->mtd.owner = master->owner;
+
+	slave->mtd.read = part_read;
+	slave->mtd.write = part_write;
+
+	if (master->panic_write)
+		slave->mtd.panic_write = part_panic_write;
+
+	if(master->point && master->unpoint){
+		slave->mtd.point = part_point;
+		slave->mtd.unpoint = part_unpoint;
+	}
+
+	if (master->read_oob)
+		slave->mtd.read_oob = part_read_oob;
+	if (master->write_oob)
+		slave->mtd.write_oob = part_write_oob;
+	if(master->read_user_prot_reg)
+		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+	if(master->read_fact_prot_reg)
+		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+	if(master->write_user_prot_reg)
+		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+	if(master->lock_user_prot_reg)
+		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+	if(master->get_user_prot_info)
+		slave->mtd.get_user_prot_info = part_get_user_prot_info;
+	if(master->get_fact_prot_info)
+		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
+	if (master->sync)
+		slave->mtd.sync = part_sync;
+	if (!partno && master->suspend && master->resume) {
+			slave->mtd.suspend = part_suspend;
+			slave->mtd.resume = part_resume;
+	}
+	if (master->writev)
+		slave->mtd.writev = part_writev;
+	if (master->lock)
+		slave->mtd.lock = part_lock;
+	if (master->unlock)
+		slave->mtd.unlock = part_unlock;
+	if (master->block_isbad)
+		slave->mtd.block_isbad = part_block_isbad;
+	if (master->block_markbad)
+		slave->mtd.block_markbad = part_block_markbad;
+	slave->mtd.erase = part_erase;
+	slave->master = master;
+	slave->offset = part->offset;
+	slave->index = partno;
+
+	if (slave->offset == MTDPART_OFS_APPEND)
+		slave->offset = cur_offset;
+	if (slave->offset == MTDPART_OFS_NXTBLK) {
+		slave->offset = cur_offset;
+		if ((cur_offset % master->erasesize) != 0) {
+			/* Round up to next erasesize */
+			slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
+			printk(KERN_NOTICE "Moving partition %d: "
+			       "0x%08x -> 0x%08x\n", partno,
+			       cur_offset, slave->offset);
+		}
+	}
+	if (slave->mtd.size == MTDPART_SIZ_FULL)
+		slave->mtd.size = master->size - slave->offset;
+
+	printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+		slave->offset + slave->mtd.size, slave->mtd.name);
+
+	/* let's do some sanity checks */
+	if (slave->offset >= master->size) {
+			/* let's register it anyway to preserve ordering */
+		slave->offset = 0;
+		slave->mtd.size = 0;
+		printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+			part->name);
+	}
+	if (slave->offset + slave->mtd.size > master->size) {
+		slave->mtd.size = master->size - slave->offset;
+		printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+			part->name, master->name, slave->mtd.size);
+	}
+	if (master->numeraseregions>1) {
+		/* Deal with variable erase size stuff */
+		int i;
+		struct mtd_erase_region_info *regions = master->eraseregions;
+
+		/* Find the first erase regions which is part of this partition. */
+		for (i=0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
+			;
+
+		for (i--; i < master->numeraseregions && regions[i].offset < slave->offset + slave->mtd.size; i++) {
+			if (slave->mtd.erasesize < regions[i].erasesize) {
+				slave->mtd.erasesize = regions[i].erasesize;
+			}
+		}
+	} else {
+		/* Single erase size */
+		slave->mtd.erasesize = master->erasesize;
+	}
+
+	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+	    (slave->offset % slave->mtd.erasesize)) {
+		/* Doesn't start on a boundary of major erase size */
+		/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+		slave->mtd.flags &= ~MTD_WRITEABLE;
+		printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+			part->name);
+	}
+	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+	    (slave->mtd.size % slave->mtd.erasesize)) {
+		slave->mtd.flags &= ~MTD_WRITEABLE;
+		printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+			part->name);
+	}
+
+	slave->mtd.ecclayout = master->ecclayout;
+	if (master->block_isbad) {
+		uint32_t offs = 0;
+
+		while(offs < slave->mtd.size) {
+			if (master->block_isbad(master,
+						offs + slave->offset))
+				slave->mtd.ecc_stats.badblocks++;
+			offs += slave->mtd.erasesize;
+		}
+	}
+
+	if(part->mtdp) {	/* store the object pointer (caller may or may not register it */
+		*part->mtdp = &slave->mtd;
+		slave->registered = 0;
+	} else {
+		/* register our partition */
+		add_mtd_device(&slave->mtd);
+		slave->registered = 1;
+	}
+	return slave;
+}
+
 /*
  * This function, given a master MTD object and a partition table, creates
  * and registers slave MTD objects which are bound to the master according to
@@ -331,166 +495,10 @@ int add_mtd_partitions(struct mtd_info *master,
 	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
-
-		/* allocate the partition structure */
-		slave = kzalloc (sizeof(*slave), GFP_KERNEL);
-		if (!slave) {
-			printk ("memory allocation error while creating partitions for \"%s\"\n",
-				master->name);
-			del_mtd_partitions(master);
+		slave = add_one_partition(master, parts + i, i, cur_offset);
+		if (!slave)
 			return -ENOMEM;
-		}
-		list_add(&slave->list, &mtd_partitions);
-
-		/* set up the MTD object for this partition */
-		slave->mtd.type = master->type;
-		slave->mtd.flags = master->flags & ~parts[i].mask_flags;
-		slave->mtd.size = parts[i].size;
-		slave->mtd.writesize = master->writesize;
-		slave->mtd.oobsize = master->oobsize;
-		slave->mtd.oobavail = master->oobavail;
-		slave->mtd.subpage_sft = master->subpage_sft;
-
-		slave->mtd.name = parts[i].name;
-		slave->mtd.owner = master->owner;
-
-		slave->mtd.read = part_read;
-		slave->mtd.write = part_write;
-
-		if (master->panic_write)
-			slave->mtd.panic_write = part_panic_write;
-
-		if(master->point && master->unpoint){
-			slave->mtd.point = part_point;
-			slave->mtd.unpoint = part_unpoint;
-		}
-
-		if (master->read_oob)
-			slave->mtd.read_oob = part_read_oob;
-		if (master->write_oob)
-			slave->mtd.write_oob = part_write_oob;
-		if(master->read_user_prot_reg)
-			slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-		if(master->read_fact_prot_reg)
-			slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-		if(master->write_user_prot_reg)
-			slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-		if(master->lock_user_prot_reg)
-			slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-		if(master->get_user_prot_info)
-			slave->mtd.get_user_prot_info = part_get_user_prot_info;
-		if(master->get_fact_prot_info)
-			slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
-		if (master->sync)
-			slave->mtd.sync = part_sync;
-		if (!i && master->suspend && master->resume) {
-				slave->mtd.suspend = part_suspend;
-				slave->mtd.resume = part_resume;
-		}
-		if (master->writev)
-			slave->mtd.writev = part_writev;
-		if (master->lock)
-			slave->mtd.lock = part_lock;
-		if (master->unlock)
-			slave->mtd.unlock = part_unlock;
-		if (master->block_isbad)
-			slave->mtd.block_isbad = part_block_isbad;
-		if (master->block_markbad)
-			slave->mtd.block_markbad = part_block_markbad;
-		slave->mtd.erase = part_erase;
-		slave->master = master;
-		slave->offset = parts[i].offset;
-		slave->index = i;
-
-		if (slave->offset == MTDPART_OFS_APPEND)
-			slave->offset = cur_offset;
-		if (slave->offset == MTDPART_OFS_NXTBLK) {
-			slave->offset = cur_offset;
-			if ((cur_offset % master->erasesize) != 0) {
-				/* Round up to next erasesize */
-				slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
-				printk(KERN_NOTICE "Moving partition %d: "
-				       "0x%08x -> 0x%08x\n", i,
-				       cur_offset, slave->offset);
-			}
-		}
-		if (slave->mtd.size == MTDPART_SIZ_FULL)
-			slave->mtd.size = master->size - slave->offset;
 		cur_offset = slave->offset + slave->mtd.size;
-
-		printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
-			slave->offset + slave->mtd.size, slave->mtd.name);
-
-		/* let's do some sanity checks */
-		if (slave->offset >= master->size) {
-				/* let's register it anyway to preserve ordering */
-			slave->offset = 0;
-			slave->mtd.size = 0;
-			printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
-				parts[i].name);
-		}
-		if (slave->offset + slave->mtd.size > master->size) {
-			slave->mtd.size = master->size - slave->offset;
-			printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
-				parts[i].name, master->name, slave->mtd.size);
-		}
-		if (master->numeraseregions>1) {
-			/* Deal with variable erase size stuff */
-			int i;
-			struct mtd_erase_region_info *regions = master->eraseregions;
-
-			/* Find the first erase regions which is part of this partition. */
-			for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
-				;
-
-			for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
-				if (slave->mtd.erasesize < regions[i].erasesize) {
-					slave->mtd.erasesize = regions[i].erasesize;
-				}
-			}
-		} else {
-			/* Single erase size */
-			slave->mtd.erasesize = master->erasesize;
-		}
-
-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
-		    (slave->offset % slave->mtd.erasesize)) {
-			/* Doesn't start on a boundary of major erase size */
-			/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
-			slave->mtd.flags &= ~MTD_WRITEABLE;
-			printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
-				parts[i].name);
-		}
-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
-		    (slave->mtd.size % slave->mtd.erasesize)) {
-			slave->mtd.flags &= ~MTD_WRITEABLE;
-			printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
-				parts[i].name);
-		}
-
-		slave->mtd.ecclayout = master->ecclayout;
-		if (master->block_isbad) {
-			uint32_t offs = 0;
-
-			while(offs < slave->mtd.size) {
-				if (master->block_isbad(master,
-							offs + slave->offset))
-					slave->mtd.ecc_stats.badblocks++;
-				offs += slave->mtd.erasesize;
-			}
-		}
-
-		if(parts[i].mtdp)
-		{	/* store the object pointer (caller may or may not register it */
-			*parts[i].mtdp = &slave->mtd;
-			slave->registered = 0;
-		}
-		else
-		{
-			/* register our partition */
-			add_mtd_device(&slave->mtd);
-			slave->registered = 1;
-		}
 	}
 
 	return 0;
-- 
cgit v1.2.3


From b33a2887396a1a5207e56459f62c4b132294ca58 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:00:33 +0900
Subject: [MTD][MTDPART] Handle most checkpatch findings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Remaining are 12 warnings about long lines and 1 about braces that
could be argued about.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 129 +++++++++++++++++++++++++-------------------------
 1 file changed, 65 insertions(+), 64 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 45c6f32b0bf..9cf73d360e7 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -44,8 +44,8 @@ struct mtd_part {
  * to the _real_ device.
  */
 
-static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -54,7 +54,7 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
 		len = 0;
 	else if (from + len > mtd->size)
 		len = mtd->size - from;
-	res = part->master->read (part->master, from + part->offset,
+	res = part->master->read(part->master, from + part->offset,
 				   len, retlen, buf);
 	if (unlikely(res)) {
 		if (res == -EUCLEAN)
@@ -65,8 +65,8 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len,
 	return res;
 }
 
-static int part_point (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, void **virt, resource_size_t *phys)
+static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
+		size_t *retlen, void **virt, resource_size_t *phys)
 {
 	struct mtd_part *part = PART(mtd);
 	if (from >= mtd->size)
@@ -85,7 +85,7 @@ static void part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
-			 struct mtd_oob_ops *ops)
+		struct mtd_oob_ops *ops)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -105,38 +105,38 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 	return res;
 }
 
-static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_user_prot_reg (part->master, from,
+	return part->master->read_user_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_get_user_prot_info (struct mtd_info *mtd,
-				    struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd,
+		struct otp_info *buf, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_user_prot_info (part->master, buf, len);
+	return part->master->get_user_prot_info(part->master, buf, len);
 }
 
-static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->read_fact_prot_reg (part->master, from,
+	return part->master->read_fact_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_get_fact_prot_info (struct mtd_info *mtd,
-				    struct otp_info *buf, size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->get_fact_prot_info (part->master, buf, len);
+	return part->master->get_fact_prot_info(part->master, buf, len);
 }
 
-static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
@@ -145,12 +145,12 @@ static int part_write (struct mtd_info *mtd, loff_t to, size_t len,
 		len = 0;
 	else if (to + len > mtd->size)
 		len = mtd->size - to;
-	return part->master->write (part->master, to + part->offset,
+	return part->master->write(part->master, to + part->offset,
 				    len, retlen, buf);
 }
 
-static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
@@ -159,12 +159,12 @@ static int part_panic_write (struct mtd_info *mtd, loff_t to, size_t len,
 		len = 0;
 	else if (to + len > mtd->size)
 		len = mtd->size - to;
-	return part->master->panic_write (part->master, to + part->offset,
+	return part->master->panic_write(part->master, to + part->offset,
 				    len, retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
-			 struct mtd_oob_ops *ops)
+		struct mtd_oob_ops *ops)
 {
 	struct mtd_part *part = PART(mtd);
 
@@ -178,31 +178,32 @@ static int part_write_oob(struct mtd_info *mtd, loff_t to,
 	return part->master->write_oob(part->master, to + part->offset, ops);
 }
 
-static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len, size_t *retlen, u_char *buf)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->write_user_prot_reg (part->master, from,
+	return part->master->write_user_prot_reg(part->master, from,
 					len, retlen, buf);
 }
 
-static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len)
+static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
+		size_t len)
 {
 	struct mtd_part *part = PART(mtd);
-	return part->master->lock_user_prot_reg (part->master, from, len);
+	return part->master->lock_user_prot_reg(part->master, from, len);
 }
 
-static int part_writev (struct mtd_info *mtd,  const struct kvec *vecs,
-			 unsigned long count, loff_t to, size_t *retlen)
+static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		unsigned long count, loff_t to, size_t *retlen)
 {
 	struct mtd_part *part = PART(mtd);
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
-	return part->master->writev (part->master, vecs, count,
+	return part->master->writev(part->master, vecs, count,
 					to + part->offset, retlen);
 }
 
-static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
+static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mtd_part *part = PART(mtd);
 	int ret;
@@ -234,7 +235,7 @@ void mtd_erase_callback(struct erase_info *instr)
 }
 EXPORT_SYMBOL_GPL(mtd_erase_callback);
 
-static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 	if ((len + ofs) > mtd->size)
@@ -242,7 +243,7 @@ static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
 	return part->master->lock(part->master, ofs + part->offset, len);
 }
 
-static int part_unlock (struct mtd_info *mtd, loff_t ofs, size_t len)
+static int part_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
 {
 	struct mtd_part *part = PART(mtd);
 	if ((len + ofs) > mtd->size)
@@ -268,7 +269,7 @@ static void part_resume(struct mtd_info *mtd)
 	part->master->resume(part->master);
 }
 
-static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
 	if (ofs >= mtd->size)
@@ -277,7 +278,7 @@ static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
 	return part->master->block_isbad(part->master, ofs);
 }
 
-static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
+static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
 	struct mtd_part *part = PART(mtd);
 	int res;
@@ -305,13 +306,14 @@ int del_mtd_partitions(struct mtd_info *master)
 	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
 		if (slave->master == master) {
 			list_del(&slave->list);
-			if(slave->registered)
+			if (slave->registered)
 				del_mtd_device(&slave->mtd);
 			kfree(slave);
 		}
 
 	return 0;
 }
+EXPORT_SYMBOL(del_mtd_partitions);
 
 static struct mtd_part *add_one_partition(struct mtd_info *master,
 		const struct mtd_partition *part, int partno,
@@ -320,9 +322,9 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	struct mtd_part *slave;
 
 	/* allocate the partition structure */
-	slave = kzalloc (sizeof(*slave), GFP_KERNEL);
+	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
 	if (!slave) {
-		printk("memory allocation error while creating partitions for \"%s\"\n",
+		printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
 			master->name);
 		del_mtd_partitions(master);
 		return NULL;
@@ -347,7 +349,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if (master->panic_write)
 		slave->mtd.panic_write = part_panic_write;
 
-	if(master->point && master->unpoint){
+	if (master->point && master->unpoint) {
 		slave->mtd.point = part_point;
 		slave->mtd.unpoint = part_unpoint;
 	}
@@ -356,17 +358,17 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		slave->mtd.read_oob = part_read_oob;
 	if (master->write_oob)
 		slave->mtd.write_oob = part_write_oob;
-	if(master->read_user_prot_reg)
+	if (master->read_user_prot_reg)
 		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
-	if(master->read_fact_prot_reg)
+	if (master->read_fact_prot_reg)
 		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
-	if(master->write_user_prot_reg)
+	if (master->write_user_prot_reg)
 		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
-	if(master->lock_user_prot_reg)
+	if (master->lock_user_prot_reg)
 		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
-	if(master->get_user_prot_info)
+	if (master->get_user_prot_info)
 		slave->mtd.get_user_prot_info = part_get_user_prot_info;
-	if(master->get_fact_prot_info)
+	if (master->get_fact_prot_info)
 		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
 	if (master->sync)
 		slave->mtd.sync = part_sync;
@@ -404,7 +406,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if (slave->mtd.size == MTDPART_SIZ_FULL)
 		slave->mtd.size = master->size - slave->offset;
 
-	printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+	printk(KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
 		slave->offset + slave->mtd.size, slave->mtd.name);
 
 	/* let's do some sanity checks */
@@ -412,21 +414,21 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 			/* let's register it anyway to preserve ordering */
 		slave->offset = 0;
 		slave->mtd.size = 0;
-		printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
 	}
 	if (slave->offset + slave->mtd.size > master->size) {
 		slave->mtd.size = master->size - slave->offset;
-		printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
 			part->name, master->name, slave->mtd.size);
 	}
-	if (master->numeraseregions>1) {
+	if (master->numeraseregions > 1) {
 		/* Deal with variable erase size stuff */
 		int i;
 		struct mtd_erase_region_info *regions = master->eraseregions;
 
 		/* Find the first erase regions which is part of this partition. */
-		for (i=0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
+		for (i = 0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
 			;
 
 		for (i--; i < master->numeraseregions && regions[i].offset < slave->offset + slave->mtd.size; i++) {
@@ -442,15 +444,16 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
 	    (slave->offset % slave->mtd.erasesize)) {
 		/* Doesn't start on a boundary of major erase size */
-		/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+		/* FIXME: Let it be writable if it is on a boundary of
+		 * _minor_ erase size though */
 		slave->mtd.flags &= ~MTD_WRITEABLE;
-		printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
 			part->name);
 	}
 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
 	    (slave->mtd.size % slave->mtd.erasesize)) {
 		slave->mtd.flags &= ~MTD_WRITEABLE;
-		printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
 			part->name);
 	}
 
@@ -458,7 +461,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	if (master->block_isbad) {
 		uint32_t offs = 0;
 
-		while(offs < slave->mtd.size) {
+		while (offs < slave->mtd.size) {
 			if (master->block_isbad(master,
 						offs + slave->offset))
 				slave->mtd.ecc_stats.badblocks++;
@@ -466,7 +469,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		}
 	}
 
-	if(part->mtdp) {	/* store the object pointer (caller may or may not register it */
+	if (part->mtdp) {
+		/* store the object pointer (caller may or may not register it*/
 		*part->mtdp = &slave->mtd;
 		slave->registered = 0;
 	} else {
@@ -492,7 +496,7 @@ int add_mtd_partitions(struct mtd_info *master,
 	u_int32_t cur_offset = 0;
 	int i;
 
-	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
 		slave = add_one_partition(master, parts + i, i, cur_offset);
@@ -503,9 +507,7 @@ int add_mtd_partitions(struct mtd_info *master,
 
 	return 0;
 }
-
 EXPORT_SYMBOL(add_mtd_partitions);
-EXPORT_SYMBOL(del_mtd_partitions);
 
 static DEFINE_SPINLOCK(part_parser_lock);
 static LIST_HEAD(part_parsers);
@@ -535,6 +537,7 @@ int register_mtd_parser(struct mtd_part_parser *p)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(register_mtd_parser);
 
 int deregister_mtd_parser(struct mtd_part_parser *p)
 {
@@ -543,6 +546,7 @@ int deregister_mtd_parser(struct mtd_part_parser *p)
 	spin_unlock(&part_parser_lock);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(deregister_mtd_parser);
 
 int parse_mtd_partitions(struct mtd_info *master, const char **types,
 			 struct mtd_partition **pparts, unsigned long origin)
@@ -570,7 +574,4 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types,
 	}
 	return ret;
 }
-
 EXPORT_SYMBOL_GPL(parse_mtd_partitions);
-EXPORT_SYMBOL_GPL(register_mtd_parser);
-EXPORT_SYMBOL_GPL(deregister_mtd_parser);
-- 
cgit v1.2.3


From 6910c1368104d50e6b6afc6c8b7e9d1670a374e7 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:00:57 +0900
Subject: [MTD][MTDPART] Cleanup and document the erase region handling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Mostly simplifying the loops.  Now everything fits into 80 columns,
is easier to read and the finer details have extra comments.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 9cf73d360e7..5aac59c21ea 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -424,18 +424,24 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 	}
 	if (master->numeraseregions > 1) {
 		/* Deal with variable erase size stuff */
-		int i;
+		int i, max = master->numeraseregions;
+		u32 end = slave->offset + slave->mtd.size;
 		struct mtd_erase_region_info *regions = master->eraseregions;
 
-		/* Find the first erase regions which is part of this partition. */
-		for (i = 0; i < master->numeraseregions && regions[i].offset <= slave->offset; i++)
+		/* Find the first erase regions which is part of this
+		 * partition. */
+		for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
 			;
+		/* The loop searched for the region _behind_ the first one */
+		i--;
 
-		for (i--; i < master->numeraseregions && regions[i].offset < slave->offset + slave->mtd.size; i++) {
+		/* Pick biggest erasesize */
+		for (; i < max && regions[i].offset < end; i++) {
 			if (slave->mtd.erasesize < regions[i].erasesize) {
 				slave->mtd.erasesize = regions[i].erasesize;
 			}
 		}
+		BUG_ON(slave->mtd.erasesize == 0);
 	} else {
 		/* Single erase size */
 		slave->mtd.erasesize = master->erasesize;
-- 
cgit v1.2.3


From f636ffb420f0f9059c1d0b841afd691657246ad6 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Sat, 19 Jul 2008 01:01:22 +0900
Subject: [MTD][MTDPART] Fix a division by zero bug
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When detecting a partition beyond the end of the device, skip most of
the initialisation, in particular those bits causing a division by zero.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdpart.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 5aac59c21ea..edb90b58a9b 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -411,11 +411,12 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 
 	/* let's do some sanity checks */
 	if (slave->offset >= master->size) {
-			/* let's register it anyway to preserve ordering */
+		/* let's register it anyway to preserve ordering */
 		slave->offset = 0;
 		slave->mtd.size = 0;
 		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
+		goto out_register;
 	}
 	if (slave->offset + slave->mtd.size > master->size) {
 		slave->mtd.size = master->size - slave->offset;
@@ -475,6 +476,7 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		}
 	}
 
+out_register:
 	if (part->mtdp) {
 		/* store the object pointer (caller may or may not register it*/
 		*part->mtdp = &slave->mtd;
-- 
cgit v1.2.3


From ca6f12c67ed19718cf37d0f531af9438de85b70c Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Wed, 16 Jul 2008 00:09:15 +0900
Subject: [MTD] jedec_probe: Fix SST 16-bit chip detection

The unlock_addr rework in kernel 2.6.25 breaks 16-bit SST chips.  SST
39LF160 and SST 39VF1601 are both 16-bit only chip (do not have BYTE#
pin) and new uaddr value is not correct for them.  Add
MTD_UADDR_0xAAAA_0x5555 for those chips.  Tested with SST 39VF1601
chip.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/chips/jedec_probe.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index afb35e3a3ce..dbba5abf0db 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -200,6 +200,7 @@ enum uaddr {
 	MTD_UADDR_0x0555_0x0AAA,
 	MTD_UADDR_0x5555_0x2AAA,
 	MTD_UADDR_0x0AAA_0x0555,
+	MTD_UADDR_0xAAAA_0x5555,
 	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
 	MTD_UADDR_UNNECESSARY,		/* Does not require any address */
 };
@@ -247,6 +248,11 @@ static const struct unlock_addr  unlock_addrs[] = {
 		.addr2 = 0x0555
 	},
 
+	[MTD_UADDR_0xAAAA_0x5555] = {
+		.addr1 = 0xaaaa,
+		.addr2 = 0x5555
+	},
+
 	[MTD_UADDR_DONT_CARE] = {
 		.addr1 = 0x0000,      /* Doesn't matter which address */
 		.addr2 = 0x0000       /* is used - must be last entry */
@@ -1461,8 +1467,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39LF160,
 		.name		= "SST 39LF160",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,
@@ -1474,8 +1480,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_SST,     /* should be CFI */
 		.dev_id		= SST39VF1601,
 		.name		= "SST 39VF1601",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x5555_0x2AAA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_2MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 2,
-- 
cgit v1.2.3


From ee39a0e61b8a307576b5e26057f8257444b5c9c1 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Date: Tue, 15 Jul 2008 23:04:35 +0900
Subject: [MTD][NAND] au1550nd: remove unused variable

Remove unused variable from au1550 NAND driver.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/au1550nd.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 22ad9f36776..761946ea45b 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -602,8 +602,6 @@ module_init(au1xxx_nand_init);
  */
 static void __exit au1550_cleanup(void)
 {
-	struct nand_chip *this = (struct nand_chip *)&au1550_mtd[1];
-
 	/* Release resources, unregister device */
 	nand_release(au1550_mtd);
 
-- 
cgit v1.2.3


From 30821fee4f0cb3e6d241d9f7ddc37742212e3eb7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-mtd@fluff.org>
Date: Tue, 15 Jul 2008 11:58:31 +0100
Subject: CPUFREQ: S3C24XX NAND driver frequency scaling support.

Add support for CPU frequency scalling to the S3C24XX NAND driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/s3c2410.c | 143 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 122 insertions(+), 21 deletions(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 35c6db54c98..556139ed1fd 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -36,6 +36,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/cpufreq.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -104,8 +105,13 @@ struct s3c2410_nand_info {
 	int				sel_bit;
 	int				mtd_count;
 	unsigned long			save_sel;
+	unsigned long			clk_rate;
 
 	enum s3c_cpu_type		cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block	freq_transition;
+#endif
 };
 
 /* conversion functions */
@@ -163,17 +169,18 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
 
 /* controller setup */
 
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
-			       struct platform_device *pdev)
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
 {
-	struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
-	unsigned long clkrate = clk_get_rate(info->clk);
+	struct s3c2410_platform_nand *plat = info->platform;
 	int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
 	int tacls, twrph0, twrph1;
-	unsigned long cfg = 0;
+	unsigned long clkrate = clk_get_rate(info->clk);
+	unsigned long set, cfg, mask;
+	unsigned long flags;
 
 	/* calculate the timing information for the controller */
 
+	info->clk_rate = clkrate;
 	clkrate /= 1000;	/* turn clock into kHz for ease of use */
 
 	if (plat != NULL) {
@@ -195,28 +202,69 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
 	dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
 	       tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
 
+	switch (info->cpu_type) {
+	case TYPE_S3C2410:
+		mask = (S3C2410_NFCONF_TACLS(3) |
+			S3C2410_NFCONF_TWRPH0(7) |
+			S3C2410_NFCONF_TWRPH1(7));
+		set = S3C2410_NFCONF_EN;
+		set |= S3C2410_NFCONF_TACLS(tacls - 1);
+		set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+		set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+		break;
+
+	case TYPE_S3C2440:
+	case TYPE_S3C2412:
+		mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
+			S3C2410_NFCONF_TWRPH0(7) |
+			S3C2410_NFCONF_TWRPH1(7));
+
+		set = S3C2440_NFCONF_TACLS(tacls - 1);
+		set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+		set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+		break;
+
+	default:
+		/* keep compiler happy */
+		mask = 0;
+		set = 0;
+		BUG();
+	}
+
+	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+	local_irq_save(flags);
+
+	cfg = readl(info->regs + S3C2410_NFCONF);
+	cfg &= ~mask;
+	cfg |= set;
+	writel(cfg, info->regs + S3C2410_NFCONF);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+	int ret;
+
+	ret = s3c2410_nand_setrate(info);
+	if (ret < 0)
+		return ret;
+
  	switch (info->cpu_type) {
  	case TYPE_S3C2410:
-		cfg = S3C2410_NFCONF_EN;
-		cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-		cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-		cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+	default:
 		break;
 
  	case TYPE_S3C2440:
  	case TYPE_S3C2412:
-		cfg = S3C2440_NFCONF_TACLS(tacls - 1);
-		cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
-		cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
-
 		/* enable the controller and de-assert nFCE */
 
 		writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
 	}
 
-	dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
-	writel(cfg, info->regs + S3C2410_NFCONF);
 	return 0;
 }
 
@@ -497,6 +545,52 @@ static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
 	writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
 }
 
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+					  unsigned long val, void *data)
+{
+	struct s3c2410_nand_info *info;
+	unsigned long newclk;
+
+	info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+	newclk = clk_get_rate(info->clk);
+
+	if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+	    (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+		s3c2410_nand_setrate(info);
+	}
+
+	return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+	info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+	return cpufreq_register_notifier(&info->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+	cpufreq_unregister_notifier(&info->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+	return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
 /* device management functions */
 
 static int s3c2410_nand_remove(struct platform_device *pdev)
@@ -508,9 +602,10 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
 	if (info == NULL)
 		return 0;
 
-	/* first thing we need to do is release all our mtds
-	 * and their partitions, then go through freeing the
-	 * resources used
+	s3c2410_nand_cpufreq_deregister(info);
+
+	/* Release all our mtds  and their partitions, then go through
+	 * freeing the resources used
 	 */
 
 	if (info->mtds != NULL) {
@@ -769,7 +864,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 
 	/* initialise the hardware */
 
-	err = s3c2410_nand_inithw(info, pdev);
+	err = s3c2410_nand_inithw(info);
 	if (err != 0)
 		goto exit_error;
 
@@ -812,6 +907,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
 			sets++;
 	}
 
+	err = s3c2410_nand_cpufreq_register(info);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to init cpufreq support\n");
+		goto exit_error;
+	}
+
 	if (allow_clk_stop(info)) {
 		dev_info(&pdev->dev, "clock idle support enabled\n");
 		clk_disable(info->clk);
@@ -859,7 +960,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
 
 	if (info) {
 		clk_enable(info->clk);
-		s3c2410_nand_inithw(info, dev);
+		s3c2410_nand_inithw(info);
 
 		/* Restore the state of the nFCE line. */
 
-- 
cgit v1.2.3


From 3d45955962496879dead8d4dd70bb9a23b07154b Mon Sep 17 00:00:00 2001
From: Alexey Korolev <akorolev@infradead.org>
Date: Thu, 15 May 2008 17:23:18 +0100
Subject: [MTD] [NAND] subpage read feature as a way to increase performance.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch enables NAND subpage read functionality.
If upper layer drivers are requesting to read non page aligned data NAND
subpage-read functionality reads the only whose ECC regions which include
requested data when original code reads whole page.
This significantly improves performance in many cases.

Here are some digits :

UBI volume mount time
No subpage reads: 5.75 seconds
Subpage read patch: 2.42 seconds

Open/stat time for files on JFFS2 volume:
No subpage read  0m 5.36s
Subpage read     0m 2.88s

Signed-off-by Alexey Korolev <akorolev@infradead.org>
Acked-by: Artem Bityutskiy <dedekind@infradead.org>
Acked-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/nand_base.c | 87 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 86 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ba1bdf78732..d1129bae6c2 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -797,6 +797,87 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	return 0;
 }
 
+/**
+ * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @dataofs	offset of requested data within the page
+ * @readlen	data length
+ * @buf:	buffer to store read data
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+{
+	int start_step, end_step, num_steps;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *p;
+	int data_col_addr, i, gaps = 0;
+	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+
+	/* Column address wihin the page aligned to ECC size (256bytes). */
+	start_step = data_offs / chip->ecc.size;
+	end_step = (data_offs + readlen - 1) / chip->ecc.size;
+	num_steps = end_step - start_step + 1;
+
+	/* Data size aligned to ECC ecc.size*/
+	datafrag_len = num_steps * chip->ecc.size;
+	eccfrag_len = num_steps * chip->ecc.bytes;
+
+	data_col_addr = start_step * chip->ecc.size;
+	/* If we read not a page aligned data */
+	if (data_col_addr != 0)
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+	p = bufpoi + data_col_addr;
+	chip->read_buf(mtd, p, datafrag_len);
+
+	/* Calculate  ECC */
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+		chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+	/* The performance is faster if to position offsets
+	   according to ecc.pos. Let make sure here that
+	   there are no gaps in ecc positions */
+	for (i = 0; i < eccfrag_len - 1; i++) {
+		if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
+			eccpos[i + start_step * chip->ecc.bytes + 1]) {
+			gaps = 1;
+			break;
+		}
+	}
+	if (gaps) {
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	} else {
+		/* send the command to read the particular ecc bytes */
+		/* take care about buswidth alignment in read_buf */
+		aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1);
+		aligned_len = eccfrag_len;
+		if (eccpos[start_step * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+		if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1))
+			aligned_len++;
+
+		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1);
+		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+	}
+
+	for (i = 0; i < eccfrag_len; i++)
+		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]];
+
+	p = bufpoi + data_col_addr;
+	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+		int stat;
+
+		stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+		if (stat == -1)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
 /**
  * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
  * @mtd:	mtd info structure
@@ -994,6 +1075,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 			/* Now read the page into the buffer */
 			if (unlikely(ops->mode == MTD_OOB_RAW))
 				ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+				ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
 			else
 				ret = chip->ecc.read_page(mtd, chip, bufpoi);
 			if (ret < 0)
@@ -1001,7 +1084,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 			/* Transfer not aligned data */
 			if (!aligned) {
-				chip->pagebuf = realpage;
+				if (!NAND_SUBPAGE_READ(chip) && !oob)
+					chip->pagebuf = realpage;
 				memcpy(buf, chip->buffers->databuf + col, bytes);
 			}
 
@@ -2521,6 +2605,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->ecc.calculate = nand_calculate_ecc;
 		chip->ecc.correct = nand_correct_data;
 		chip->ecc.read_page = nand_read_page_swecc;
+		chip->ecc.read_subpage = nand_read_subpage;
 		chip->ecc.write_page = nand_write_page_swecc;
 		chip->ecc.read_oob = nand_read_oob_std;
 		chip->ecc.write_oob = nand_write_oob_std;
-- 
cgit v1.2.3