From 492e1501431e0d24c5b46933fdcb60639eacded7 Mon Sep 17 00:00:00 2001 From: Mika Korhonen Date: Tue, 9 Jun 2009 21:52:35 +0300 Subject: mtd: OneNAND: spelling fixes Signed-off-by: Mika Korhonen Acked-by: Kyungmin Park Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 6e829095ea9..ff66e4330aa 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1191,7 +1191,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, /* * Chip boundary handling in DDP * Now we issued chip 1 read and pointed chip 1 - * bufferam so we have to point chip 0 bufferam. + * bufferram so we have to point chip 0 bufferram. */ if (ONENAND_IS_DDP(this) && unlikely(from == (this->chipsize >> 1))) { @@ -1867,8 +1867,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, ONENAND_SET_NEXT_BUFFERRAM(this); /* - * 2 PLANE, MLC, and Flex-OneNAND doesn't support - * write-while-programe feature. + * 2 PLANE, MLC, and Flex-OneNAND do not support + * write-while-program feature. */ if (!ONENAND_IS_2PLANE(this) && !first) { ONENAND_SET_PREV_BUFFERRAM(this); @@ -1879,7 +1879,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, onenand_update_bufferram(mtd, prev, !ret && !prev_subpage); if (ret) { written -= prevlen; - printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret); + printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret); break; } @@ -1905,7 +1905,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, /* In partial page write we don't update bufferram */ onenand_update_bufferram(mtd, to, !ret && !subpage); if (ret) { - printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret); + printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret); break; } @@ -2201,7 +2201,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) /* Grab the lock and see if the device is available */ onenand_get_device(mtd, FL_ERASING); - /* Loop throught the pages */ + /* Loop through the blocks */ instr->state = MTD_ERASING; while (len) { @@ -2328,7 +2328,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) if (bbm->bbt) bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); - /* We write two bytes, so we dont have to mess with 16 bit access */ + /* We write two bytes, so we don't have to mess with 16-bit access */ ofs += mtd->oobsize + (bbm->badblockpos & ~0x01); /* FIXME : What to do when marking SLC block in partition * with MLC erasesize? For now, it is not advisable to @@ -2557,7 +2557,7 @@ static void onenand_unlock_all(struct mtd_info *mtd) #ifdef CONFIG_MTD_ONENAND_OTP -/* Interal OTP operation */ +/* Internal OTP operation */ typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len, size_t *retlen, u_char *buf); @@ -2921,7 +2921,7 @@ static void onenand_check_features(struct mtd_info *mtd) this->options |= ONENAND_HAS_2PLANE; case ONENAND_DEVICE_DENSITY_2Gb: - /* 2Gb DDP don't have 2 plane */ + /* 2Gb DDP does not have 2 plane */ if (!ONENAND_IS_DDP(this)) this->options |= ONENAND_HAS_2PLANE; this->options |= ONENAND_HAS_UNLOCK_ALL; @@ -3364,7 +3364,7 @@ static int onenand_probe(struct mtd_info *mtd) /* It's real page size */ this->writesize = mtd->writesize; - /* REVIST: Multichip handling */ + /* REVISIT: Multichip handling */ if (FLEXONENAND(this)) flexonenand_get_size(mtd); -- cgit v1.2.3 From b8b3ee9aabbc3e6fc7ef025d861dd780b84eb6c5 Mon Sep 17 00:00:00 2001 From: vimal singh Date: Thu, 9 Jul 2009 20:41:22 +0530 Subject: mtd: nand: remove repeated comment, fix spelling Singed-off-by: Vimal Singh Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 8c21b89d2d0..4a5a329711c 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -688,8 +688,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state) retry: spin_lock(lock); - /* Hardware controller shared among independend devices */ - /* Hardware controller shared among independend devices */ + /* Hardware controller shared among independent devices */ if (!chip->controller->active) chip->controller->active = chip; -- cgit v1.2.3 From 20d8e2489d619ac4f14c46ca376655fc06b3c1ff Mon Sep 17 00:00:00 2001 From: vimal singh Date: Tue, 7 Jul 2009 15:49:49 +0530 Subject: mtd: nand_base: use __func__ instead of typing names Correcting debug prints by removing function names from print messages and using '__func__' macro instead. Function names were wrong in few places. Signed-off-by: Vimal Singh Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 82 +++++++++++++++++++++++--------------------- 1 file changed, 42 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4a5a329711c..268c9a4317b 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1412,8 +1412,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, int len; uint8_t *buf = ops->oobbuf; - DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n", - (unsigned long long)from, readlen); + DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n", + __func__, (unsigned long long)from, readlen); if (ops->mode == MTD_OOB_AUTO) len = chip->ecc.layout->oobavail; @@ -1421,8 +1421,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, len = mtd->oobsize; if (unlikely(ops->ooboffs >= len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " - "Attempt to start read outside oob\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read " + "outside oob\n", __func__); return -EINVAL; } @@ -1430,8 +1430,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, if (unlikely(from >= mtd->size || ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) - (from >> chip->page_shift)) * len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " - "Attempt read beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end " + "of device\n", __func__); return -EINVAL; } @@ -1505,8 +1505,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from, /* Do not allow reads past end of device */ if (ops->datbuf && (from + ops->len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: " - "Attempt read beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read " + "beyond end of device\n", __func__); return -EINVAL; } @@ -1815,8 +1815,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, /* reject writes, which are not page aligned */ if (NOTALIGNED(to) || NOTALIGNED(ops->len)) { - printk(KERN_NOTICE "nand_write: " - "Attempt to write not page aligned data\n"); + printk(KERN_NOTICE "%s: Attempt to write not " + "page aligned data\n", __func__); return -EINVAL; } @@ -1943,8 +1943,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, int chipnr, page, status, len; struct nand_chip *chip = mtd->priv; - DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", - (unsigned int)to, (int)ops->ooblen); + DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n", + __func__, (unsigned int)to, (int)ops->ooblen); if (ops->mode == MTD_OOB_AUTO) len = chip->ecc.layout->oobavail; @@ -1953,14 +1953,14 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, /* Do not allow write past end of page */ if ((ops->ooboffs + ops->ooblen) > len) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " - "Attempt to write past end of page\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write " + "past end of page\n", __func__); return -EINVAL; } if (unlikely(ops->ooboffs >= len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: " - "Attempt to start write outside oob\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start " + "write outside oob\n", __func__); return -EINVAL; } @@ -1969,8 +1969,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, ops->ooboffs + ops->ooblen > ((mtd->size >> chip->page_shift) - (to >> chip->page_shift)) * len)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: " - "Attempt write beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond " + "end of device\n", __func__); return -EINVAL; } @@ -2025,8 +2025,8 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to, /* Do not allow writes past end of device */ if (ops->datbuf && (to + ops->len) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: " - "Attempt write beyond end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond " + "end of device\n", __func__); return -EINVAL; } @@ -2116,26 +2116,27 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, unsigned int bbt_masked_page = 0xffffffff; loff_t len; - DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, len = %llu\n", - (unsigned long long)instr->addr, (unsigned long long)instr->len); + DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n", + __func__, (unsigned long long)instr->addr, + (unsigned long long)instr->len); /* Start address must align on block boundary */ if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__); return -EINVAL; } /* Length must align on block boundary */ if (instr->len & ((1 << chip->phys_erase_shift) - 1)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Length not block aligned\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n", + __func__); return -EINVAL; } /* Do not allow erase past end of device */ if ((instr->len + instr->addr) > mtd->size) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Erase past end of device\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Erase past end of device\n", + __func__); return -EINVAL; } @@ -2156,8 +2157,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, /* Check, if it is write protected */ if (nand_check_wp(mtd)) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Device is write protected!!!\n"); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n", + __func__); instr->state = MTD_ERASE_FAILED; goto erase_exit; } @@ -2182,8 +2183,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { - printk(KERN_WARNING "nand_erase: attempt to erase a " - "bad block at page 0x%08x\n", page); + printk(KERN_WARNING "%s: attempt to erase a bad block " + "at page 0x%08x\n", __func__, page); instr->state = MTD_ERASE_FAILED; goto erase_exit; } @@ -2210,8 +2211,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, /* See if block erase succeeded */ if (status & NAND_STATUS_FAIL) { - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: " - "Failed erase, page 0x%08x\n", page); + DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, " + "page 0x%08x\n", __func__, page); instr->state = MTD_ERASE_FAILED; instr->fail_addr = ((loff_t)page << chip->page_shift); @@ -2271,9 +2272,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, if (!rewrite_bbt[chipnr]) continue; /* update the BBT for chip */ - DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt " - "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr], - chip->bbt_td->pages[chipnr]); + DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt " + "(%d:0x%0llx 0x%0x)\n", __func__, chipnr, + rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]); nand_update_bbt(mtd, rewrite_bbt[chipnr]); } @@ -2291,7 +2292,7 @@ static void nand_sync(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; - DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n"); + DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__); /* Grab the lock and see if the device is available */ nand_get_device(chip, mtd, FL_SYNCING); @@ -2355,8 +2356,8 @@ static void nand_resume(struct mtd_info *mtd) if (chip->state == FL_PM_SUSPENDED) nand_release_device(mtd); else - printk(KERN_ERR "nand_resume() called for a chip which is not " - "in suspended state\n"); + printk(KERN_ERR "%s called for a chip which is not " + "in suspended state\n", __func__); } /* @@ -2857,7 +2858,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips) /* Many callers got this wrong, so check for it for a while... */ if (!mtd->owner && caller_is_module()) { - printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n"); + printk(KERN_CRIT "%s called with NULL mtd->owner!\n", + __func__); BUG(); } -- cgit v1.2.3 From dff1550986a4c0e2a4e857c9085ef3cb66b2cec5 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Mon, 6 Jul 2009 12:02:08 +0200 Subject: mtd: fix a typo in comment mtdblock erase_write(): fix typo in comment Signed-off-by: Matthias Kaehlcke Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index 77db5ce24d9..bcfb177c55e 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -84,7 +84,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos, remove_wait_queue(&wait_q, &wait); /* - * Next, writhe data to flash. + * Next, write the data to flash. */ ret = mtd->write(mtd, pos, len, &retlen, buf); -- cgit v1.2.3 From 44a1f2085e8fe07b3aecdab7c391ca057d75da0f Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 30 Jun 2009 15:38:00 -0400 Subject: mtd: ep93xx: cleanup includes in ts7250 nand driver 1. should be included not 2. add platform specific header Signed-off-by: H Hartley Sweeten Cc: Lennert Buytenhek Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/ts7250.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c index 2c410a01131..0f5562aeedc 100644 --- a/drivers/mtd/nand/ts7250.c +++ b/drivers/mtd/nand/ts7250.c @@ -24,8 +24,11 @@ #include #include #include -#include +#include + #include +#include + #include #include -- cgit v1.2.3 From 2763c508a3c8f8ec5d6df4e8c63d5e2a5a7d3954 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 17 Jul 2009 17:54:14 +0200 Subject: mtd: physmap_of: use resource_size Signed-off-by: Wolfram Sang Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/physmap_of.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 39d357b2eb4..f223f3fec3a 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -190,6 +190,7 @@ static int __devinit of_flash_probe(struct of_device *dev, const u32 *p; int reg_tuple_size; struct mtd_info **mtd_list = NULL; + resource_size_t res_size; reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32); @@ -233,8 +234,8 @@ static int __devinit of_flash_probe(struct of_device *dev, (unsigned long long)res.end); err = -EBUSY; - info->list[i].res = request_mem_region(res.start, res.end - - res.start + 1, + res_size = resource_size(&res); + info->list[i].res = request_mem_region(res.start, res_size, dev_name(&dev->dev)); if (!info->list[i].res) goto err_out; @@ -249,7 +250,7 @@ static int __devinit of_flash_probe(struct of_device *dev, info->list[i].map.name = dev_name(&dev->dev); info->list[i].map.phys = res.start; - info->list[i].map.size = res.end - res.start + 1; + info->list[i].map.size = res_size; info->list[i].map.bankwidth = *width; err = -ENOMEM; -- cgit v1.2.3 From 76d6a4791609e4d14b411a513c7648b19b258d8f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 17 Jul 2009 17:47:37 +0200 Subject: mtd: plat-ram: use resource_size Signed-off-by: Wolfram Sang Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/plat-ram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 49c9ece7647..dafb91944e7 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -175,7 +175,7 @@ static int platram_probe(struct platform_device *pdev) /* setup map parameters */ info->map.phys = res->start; - info->map.size = (res->end - res->start) + 1; + info->map.size = resource_size(res); info->map.name = pdata->mapname != NULL ? (char *)pdata->mapname : (char *)pdev->name; info->map.bankwidth = pdata->bankwidth; -- cgit v1.2.3 From 0ffd24fc7f82a0b594250e5f221340be4c322cda Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 18 Jul 2009 14:10:44 +0100 Subject: mtd: afs: fix build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/mtd/afs.c:244: warning: format ‘%5d’ expects type ‘int’, but argument 4 has type ‘uint64_t’ [dwmw2: fix incorrect 'KB' too] Signed-off-by: Russell King Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/afs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c index d072ca5be68..cec7ab98b2a 100644 --- a/drivers/mtd/afs.c +++ b/drivers/mtd/afs.c @@ -239,7 +239,7 @@ static int parse_afs_partitions(struct mtd_info *mtd, parts[idx].offset = img_ptr; parts[idx].mask_flags = 0; - printk(" mtd%d: at 0x%08x, %5dKB, %8u, %s\n", + printk(" mtd%d: at 0x%08x, %5lluKiB, %8u, %s\n", idx, img_ptr, parts[idx].size / 1024, iis.imageNumber, str); -- cgit v1.2.3 From 05dd180709fca14fbae617c0dab1bed56be334fc Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sun, 19 Jul 2009 21:19:08 -0400 Subject: mtd: correct typo "MTD_DATAFLASH_VERIFY_WRITE" Fix the misspelling to match the actual config variable defined in drivers/mtd/devi ces/Kconfig: config MTD_DATAFLASH_WRITE_VERIFY bool "Verify DataFlash page writes" depends on MTD_DATAFLASH Signed-off-by: Robert P. J. Day Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/mtd_dataflash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 43976aa4dbb..70a7369d321 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -401,7 +401,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, (void) dataflash_waitready(priv->spi); -#ifdef CONFIG_MTD_DATAFLASH_VERIFY_WRITE +#ifdef CONFIG_MTD_DATAFLASH_WRITE_VERIFY /* (3) Compare to Buffer1 */ addr = pageaddr << priv->page_offset; @@ -430,7 +430,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, } else status = 0; -#endif /* CONFIG_MTD_DATAFLASH_VERIFY_WRITE */ +#endif /* CONFIG_MTD_DATAFLASH_WRITE_VERIFY */ remaining = remaining - writelen; pageaddr++; -- cgit v1.2.3 From 9a73290d7735c0671d1d2379ed40025db8b773d0 Mon Sep 17 00:00:00 2001 From: "Singh, Vimal" Date: Fri, 12 Dec 2008 00:10:57 +0000 Subject: mtd: nand_base: allow drivers to choose ECC block size This patch allows core driver to choose ECC block size in sw ecc case. Signed-off-by: Vimal Singh Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 268c9a4317b..4c5e8a74e1b 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2728,7 +2728,8 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.write_page_raw = nand_write_page_raw; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; - chip->ecc.size = 256; + if (!chip->ecc.size) + chip->ecc.size = 256; chip->ecc.bytes = 3; break; -- cgit v1.2.3 From ad4fbc7921bd7cca108ecc1340a014e91ecc8536 Mon Sep 17 00:00:00 2001 From: vimal singh Date: Thu, 30 Jul 2009 20:54:27 +0530 Subject: mtd: physmap_of: fix incorrect check This patch fixes a spelling error that has resulted from copy and pasting. The location of the error was found using a semantic patch but the semantic patch was not trying to find these errors. After looking things over it seemed logical that this change was needed. The patch also makes sure mtd_list is not being freed if it has not been allocated Signed-off-by: Stoyan Gaydarov Signed-off-by: Vimal Singh Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/physmap_of.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index f223f3fec3a..e828d58910f 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -205,7 +205,7 @@ static int __devinit of_flash_probe(struct of_device *dev, dev_err(&dev->dev, "Malformed reg property on %s\n", dev->node->full_name); err = -EINVAL; - goto err_out; + goto err_flash_remove; } count /= reg_tuple_size; @@ -213,14 +213,14 @@ static int __devinit of_flash_probe(struct of_device *dev, info = kzalloc(sizeof(struct of_flash) + sizeof(struct of_flash_list) * count, GFP_KERNEL); if (!info) - goto err_out; - - mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL); - if (!info) - goto err_out; + goto err_flash_remove; dev_set_drvdata(&dev->dev, info); + mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL); + if (!mtd_list) + goto err_flash_remove; + for (i = 0; i < count; i++) { err = -ENXIO; if (of_address_to_resource(dp, i, &res)) { @@ -339,6 +339,7 @@ static int __devinit of_flash_probe(struct of_device *dev, err_out: kfree(mtd_list); +err_flash_remove: of_flash_remove(dev); return err; -- cgit v1.2.3 From 269c0ee66367b11de9758ee64ea039843f0c7cad Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 31 Jul 2009 14:47:58 +0200 Subject: slram: Read buffer overflow map[count] is checked before count < SLRAM_MAX_DEVICES_PARAMS Signed-off-by: Roel Kluin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/slram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 00248e81ecd..239500b0b75 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -341,7 +341,7 @@ static int init_slram(void) #else int count; - for (count = 0; (map[count]) && (count < SLRAM_MAX_DEVICES_PARAMS); + for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count]; count++) { } -- cgit v1.2.3 From c6f7e7beb9e6a64816f534a3a0dd0cfa4937f1fe Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 31 Jul 2009 16:21:01 +0200 Subject: mtd: tests: fix read buffer overflows Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/tests/mtd_oobtest.c | 2 +- drivers/mtd/tests/mtd_pagetest.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c index a18e8d2f255..5553cd4eab2 100644 --- a/drivers/mtd/tests/mtd_oobtest.c +++ b/drivers/mtd/tests/mtd_oobtest.c @@ -512,7 +512,7 @@ static int __init mtd_oobtest_init(void) goto out; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[i]; ++i) addr0 += mtd->erasesize; /* Attempt to write off end of OOB */ diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c index 9648818b9e2..103cac480fe 100644 --- a/drivers/mtd/tests/mtd_pagetest.c +++ b/drivers/mtd/tests/mtd_pagetest.c @@ -116,11 +116,11 @@ static int verify_eraseblock(int ebnum) loff_t addr = ebnum * mtd->erasesize; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[i]; ++i) addr0 += mtd->erasesize; addrn = mtd->size; - for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i) addrn -= mtd->erasesize; set_random_data(writebuf, mtd->erasesize); @@ -219,11 +219,11 @@ static int crosstest(void) memset(pp1, 0, pgsize * 4); addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[i]; ++i) addr0 += mtd->erasesize; addrn = mtd->size; - for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i) + for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i) addrn -= mtd->erasesize; /* Read 2nd-to-last page to pp1 */ @@ -317,7 +317,7 @@ static int erasecrosstest(void) ebnum = 0; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) { + for (i = 0; i < ebcnt && bbt[i]; ++i) { addr0 += mtd->erasesize; ebnum += 1; } @@ -413,7 +413,7 @@ static int erasetest(void) ebnum = 0; addr0 = 0; - for (i = 0; bbt[i] && i < ebcnt; ++i) { + for (i = 0; i < ebcnt && bbt[i]; ++i) { addr0 += mtd->erasesize; ebnum += 1; } -- cgit v1.2.3 From b0469ea785d12a6c025fa213293d608fc41405fe Mon Sep 17 00:00:00 2001 From: Siddarth Gore Date: Tue, 4 Aug 2009 08:42:08 +0530 Subject: mtd: m25p80: add support for 3 Macronix flash chips Signed-off-by: Siddarth Gore Signed-off-by: Nicolas Pitre Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 10ed195c0c1..6d8d265ae91 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -501,7 +501,10 @@ static struct flash_info __devinitdata m25p_data [] = { { "at26df321", 0x1f4701, 0, 64 * 1024, 64, SECT_4K, }, /* Macronix */ + { "mx25l3205d", 0xc22016, 0, 64 * 1024, 64, }, + { "mx25l6405d", 0xc22017, 0, 64 * 1024, 128, }, { "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, }, + { "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, }, /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). -- cgit v1.2.3 From 0acfe530a2be9192861b84566625ba9b95703226 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 7 Aug 2009 12:34:48 +0900 Subject: mtd: onenand: select MTD_PARTITIONS All of the onenand drivers depend on mtd partition support being compiled in, so just select it. Fixes up build breakage: drivers/built-in.o: In function `generic_onenand_remove': generic.c:(.devexit.text+0x80): undefined reference to `del_mtd_partitions' Reported-by: Randy Dunlap Signed-off-by: Paul Mundt Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 79fa79e8f8d..3a094d1bf8c 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -5,6 +5,7 @@ menuconfig MTD_ONENAND tristate "OneNAND Device Support" depends on MTD + select MTD_PARTITIONS help This enables support for accessing all type of OneNAND flash devices. For further information see @@ -66,7 +67,6 @@ config MTD_ONENAND_2X_PROGRAM config MTD_ONENAND_SIM tristate "OneNAND simulator support" - depends on MTD_PARTITIONS help The simulator may simulate various OneNAND flash chips for the OneNAND MTD layer. -- cgit v1.2.3 From fca910883324d437a24d447b08f524fa19261a94 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Thu, 6 Aug 2009 16:05:32 -0700 Subject: mtd: make few symbols static Make mtd_group and mtd_groups static since they are only used in this file. [Amended by Artem Bityutskiy] Signed-off-by: H Hartley Sweeten Signed-off-by: Andrew Morton Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 00ebf7af746..3f559c0f187 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -213,11 +213,11 @@ static struct attribute *mtd_attrs[] = { NULL, }; -struct attribute_group mtd_group = { +static struct attribute_group mtd_group = { .attrs = mtd_attrs, }; -struct attribute_group *mtd_groups[] = { +static struct attribute_group *mtd_groups[] = { &mtd_group, NULL, }; -- cgit v1.2.3 From 2c78c44362bc9b7c715a3c2119b89a407c1cb739 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 10 Aug 2009 10:16:37 +0200 Subject: mtd: pmcmsp-flash: fix error paths in init_msp_flash Cleanin up after errors in init_msp_flash(). Also cleanup_msp_flash() attempts to determine the size of msp_flash with `sizeof(msp_flash) / sizeof(struct mtd_info **)' This will not work since msp_flash is not an array. Signed-off-by: Roel Kluin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/pmcmsp-flash.c | 76 ++++++++++++++++++++++++++++++++--------- 1 file changed, 59 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c index 4768bd5459d..c8fd8da4bc8 100644 --- a/drivers/mtd/maps/pmcmsp-flash.c +++ b/drivers/mtd/maps/pmcmsp-flash.c @@ -50,7 +50,7 @@ static int fcnt; static int __init init_msp_flash(void) { - int i, j; + int i, j, ret = -ENOMEM; int offset, coff; char *env; int pcnt; @@ -75,14 +75,16 @@ static int __init init_msp_flash(void) printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt); msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL); + if (!msp_flash) + return -ENOMEM; + msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL); + if (!msp_parts) + goto free_msp_flash; + msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL); - if (!msp_flash || !msp_parts || !msp_maps) { - kfree(msp_maps); - kfree(msp_parts); - kfree(msp_flash); - return -ENOMEM; - } + if (!msp_maps) + goto free_msp_parts; /* loop over the flash devices, initializing each */ for (i = 0; i < fcnt; i++) { @@ -100,13 +102,18 @@ static int __init init_msp_flash(void) msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition), GFP_KERNEL); + if (!msp_parts[i]) + goto cleanup_loop; /* now initialize the devices proper */ flash_name[5] = '0' + i; env = prom_getenv(flash_name); - if (sscanf(env, "%x:%x", &addr, &size) < 2) - return -ENXIO; + if (sscanf(env, "%x:%x", &addr, &size) < 2) { + ret = -ENXIO; + kfree(msp_parts[i]); + goto cleanup_loop; + } addr = CPHYSADDR(addr); printk(KERN_NOTICE @@ -122,13 +129,23 @@ static int __init init_msp_flash(void) */ if (size > CONFIG_MSP_FLASH_MAP_LIMIT) size = CONFIG_MSP_FLASH_MAP_LIMIT; + msp_maps[i].virt = ioremap(addr, size); + if (msp_maps[i].virt == NULL) { + ret = -ENXIO; + kfree(msp_parts[i]); + goto cleanup_loop; + } + msp_maps[i].bankwidth = 1; - msp_maps[i].name = strncpy(kmalloc(7, GFP_KERNEL), - flash_name, 7); + msp_maps[i].name = kmalloc(7, GFP_KERNEL); + if (!msp_maps[i].name) { + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + goto cleanup_loop; + } - if (msp_maps[i].virt == NULL) - return -ENXIO; + msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7); for (j = 0; j < pcnt; j++) { part_name[5] = '0' + i; @@ -136,8 +153,14 @@ static int __init init_msp_flash(void) env = prom_getenv(part_name); - if (sscanf(env, "%x:%x:%n", &offset, &size, &coff) < 2) - return -ENXIO; + if (sscanf(env, "%x:%x:%n", &offset, &size, + &coff) < 2) { + ret = -ENXIO; + kfree(msp_maps[i].name); + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + goto cleanup_loop; + } msp_parts[i][j].size = size; msp_parts[i][j].offset = offset; @@ -152,18 +175,37 @@ static int __init init_msp_flash(void) add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt); } else { printk(KERN_ERR "map probe failed for flash\n"); - return -ENXIO; + ret = -ENXIO; + kfree(msp_maps[i].name); + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + goto cleanup_loop; } } return 0; + +cleanup_loop: + while (i--) { + del_mtd_partitions(msp_flash[i]); + map_destroy(msp_flash[i]); + kfree(msp_maps[i].name); + iounmap(msp_maps[i].virt); + kfree(msp_parts[i]); + } + kfree(msp_maps); +free_msp_parts: + kfree(msp_parts); +free_msp_flash: + kfree(msp_flash); + return ret; } static void __exit cleanup_msp_flash(void) { int i; - for (i = 0; i < sizeof(msp_flash) / sizeof(struct mtd_info **); i++) { + for (i = 0; i < fcnt; i++) { del_mtd_partitions(msp_flash[i]); map_destroy(msp_flash[i]); iounmap((void *)msp_maps[i].virt); -- cgit v1.2.3 From ec77e21b91f0393a5201cfd4571a82ab7d64fd29 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Fri, 18 Sep 2009 12:51:40 -0700 Subject: mtd: SST25L (non JEDEC) SPI Flash driver Add support for the non JEDEC SST25L SPI Flash devices. [dwmw2: Some cleanups] Signed-off-by: Andre Renaud Signed-off-by: Ryan Mallon Acked-by: Linus Walleij Cc: Anton Vorontsov Cc: "H Hartley Sweeten" Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/devices/Kconfig | 10 + drivers/mtd/devices/Makefile | 1 + drivers/mtd/devices/sst25l.c | 510 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 521 insertions(+) create mode 100644 drivers/mtd/devices/sst25l.c (limited to 'drivers') diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 325fab92a62..c222514bb70 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ help This option enables FAST_READ access supported by ST M25Pxx. +config MTD_SST25L + tristate "Support SST25L (non JEDEC) SPI Flash chips" + depends on SPI_MASTER + help + This enables access to the non JEDEC SST25L SPI flash chips, used + for program and data storage. + + Set up your spi devices with the right board-specific platform data, + if you want to specify device partitioning. + config MTD_SLRAM tristate "Uncached system RAM" help diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 0993d5cf392..ab5c9b92ac8 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_SST25L) += sst25l.o diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c new file mode 100644 index 00000000000..ac7d52b420c --- /dev/null +++ b/drivers/mtd/devices/sst25l.c @@ -0,0 +1,510 @@ +/* + * sst25l.c + * + * Driver for SST25L SPI Flash chips + * + * Copyright © 2009 Bluewater Systems Ltd + * Author: Andre Renaud + * Author: Ryan Mallon + * + * Based on m25p80.c + * + * This code is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +/* Erases can take up to 3 seconds! */ +#define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000) + +#define SST25L_CMD_WRSR 0x01 /* Write status register */ +#define SST25L_CMD_WRDI 0x04 /* Write disable */ +#define SST25L_CMD_RDSR 0x05 /* Read status register */ +#define SST25L_CMD_WREN 0x06 /* Write enable */ +#define SST25L_CMD_READ 0x03 /* High speed read */ + +#define SST25L_CMD_EWSR 0x50 /* Enable write status register */ +#define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */ +#define SST25L_CMD_READ_ID 0x90 /* Read device ID */ +#define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */ + +#define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */ +#define SST25L_STATUS_WREN (1 << 1) /* Write enabled */ +#define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */ +#define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */ + +struct sst25l_flash { + struct spi_device *spi; + struct mutex lock; + struct mtd_info mtd; + + int partitioned; +}; + +struct flash_info { + const char *name; + uint16_t device_id; + unsigned page_size; + unsigned nr_pages; + unsigned erase_size; +}; + +#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd) + +static struct flash_info __initdata sst25l_flash_info[] = { + {"sst25lf020a", 0xbf43, 256, 1024, 4096}, + {"sst25lf040a", 0xbf44, 256, 2048, 4096}, +}; + +static int sst25l_status(struct sst25l_flash *flash, int *status) +{ + unsigned char command, response; + int err; + + command = SST25L_CMD_RDSR; + err = spi_write_then_read(flash->spi, &command, 1, &response, 1); + if (err < 0) + return err; + + *status = response; + return 0; +} + +static int sst25l_write_enable(struct sst25l_flash *flash, int enable) +{ + unsigned char command[2]; + int status, err; + + command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI; + err = spi_write(flash->spi, command, 1); + if (err) + return err; + + command[0] = SST25L_CMD_EWSR; + err = spi_write(flash->spi, command, 1); + if (err) + return err; + + command[0] = SST25L_CMD_WRSR; + command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1; + err = spi_write(flash->spi, command, 2); + if (err) + return err; + + if (enable) { + err = sst25l_status(flash, &status); + if (err) + return err; + if (!(status & SST25L_STATUS_WREN)) + return -EROFS; + } + + return 0; +} + +static int sst25l_wait_till_ready(struct sst25l_flash *flash) +{ + unsigned long deadline; + int status, err; + + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + do { + err = sst25l_status(flash, &status); + if (err) + return err; + if (!(status & SST25L_STATUS_BUSY)) + return 0; + + cond_resched(); + } while (!time_after_eq(jiffies, deadline)); + + return -ETIMEDOUT; +} + +static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset) +{ + unsigned char command[4]; + int err; + + err = sst25l_write_enable(flash, 1); + if (err) + return err; + + command[0] = SST25L_CMD_SECTOR_ERASE; + command[1] = offset >> 16; + command[2] = offset >> 8; + command[3] = offset; + err = spi_write(flash->spi, command, 4); + if (err) + return err; + + err = sst25l_wait_till_ready(flash); + if (err) + return err; + + return sst25l_write_enable(flash, 0); +} + +static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + uint32_t addr, end; + int err; + + /* Sanity checks */ + if (instr->addr + instr->len > flash->mtd.size) + return -EINVAL; + + if ((uint32_t)instr->len % mtd->erasesize) + return -EINVAL; + + if ((uint32_t)instr->addr % mtd->erasesize) + return -EINVAL; + + addr = instr->addr; + end = addr + instr->len; + + mutex_lock(&flash->lock); + + err = sst25l_wait_till_ready(flash); + if (err) + return err; + + while (addr < end) { + err = sst25l_erase_sector(flash, addr); + if (err) { + mutex_unlock(&flash->lock); + instr->state = MTD_ERASE_FAILED; + dev_err(&flash->spi->dev, "Erase failed\n"); + return err; + } + + addr += mtd->erasesize; + } + + mutex_unlock(&flash->lock); + + instr->state = MTD_ERASE_DONE; + mtd_erase_callback(instr); + return 0; +} + +static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, unsigned char *buf) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + struct spi_transfer transfer[2]; + struct spi_message message; + unsigned char command[4]; + int ret; + + /* Sanity checking */ + if (len == 0) + return 0; + + if (from + len > flash->mtd.size) + return -EINVAL; + + if (retlen) + *retlen = 0; + + spi_message_init(&message); + memset(&transfer, 0, sizeof(transfer)); + + command[0] = SST25L_CMD_READ; + command[1] = from >> 16; + command[2] = from >> 8; + command[3] = from; + + transfer[0].tx_buf = command; + transfer[0].len = sizeof(command); + spi_message_add_tail(&transfer[0], &message); + + transfer[1].rx_buf = buf; + transfer[1].len = len; + spi_message_add_tail(&transfer[1], &message); + + mutex_lock(&flash->lock); + + /* Wait for previous write/erase to complete */ + ret = sst25l_wait_till_ready(flash); + if (ret) { + mutex_unlock(&flash->lock); + return ret; + } + + spi_sync(flash->spi, &message); + + if (retlen && message.actual_length > sizeof(command)) + *retlen += message.actual_length - sizeof(command); + + mutex_unlock(&flash->lock); + return 0; +} + +static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const unsigned char *buf) +{ + struct sst25l_flash *flash = to_sst25l_flash(mtd); + int i, j, ret, bytes, copied = 0; + unsigned char command[5]; + + /* Sanity checks */ + if (!len) + return 0; + + if (to + len > flash->mtd.size) + return -EINVAL; + + if ((uint32_t)to % mtd->writesize) + return -EINVAL; + + mutex_lock(&flash->lock); + + ret = sst25l_write_enable(flash, 1); + if (ret) + goto out; + + for (i = 0; i < len; i += mtd->writesize) { + ret = sst25l_wait_till_ready(flash); + if (ret) + goto out; + + /* Write the first byte of the page */ + command[0] = SST25L_CMD_AAI_PROGRAM; + command[1] = (to + i) >> 16; + command[2] = (to + i) >> 8; + command[3] = (to + i); + command[4] = buf[i]; + ret = spi_write(flash->spi, command, 5); + if (ret < 0) + goto out; + copied++; + + /* + * Write the remaining bytes using auto address + * increment mode + */ + bytes = min_t(uint32_t, mtd->writesize, len - i); + for (j = 1; j < bytes; j++, copied++) { + ret = sst25l_wait_till_ready(flash); + if (ret) + goto out; + + command[1] = buf[i + j]; + ret = spi_write(flash->spi, command, 2); + if (ret) + goto out; + } + } + +out: + ret = sst25l_write_enable(flash, 0); + + if (retlen) + *retlen = copied; + + mutex_unlock(&flash->lock); + return ret; +} + +static struct flash_info *__init sst25l_match_device(struct spi_device *spi) +{ + struct flash_info *flash_info = NULL; + unsigned char command[4], response; + int i, err; + uint16_t id; + + command[0] = SST25L_CMD_READ_ID; + command[1] = 0; + command[2] = 0; + command[3] = 0; + err = spi_write_then_read(spi, command, sizeof(command), &response, 1); + if (err < 0) { + dev_err(&spi->dev, "error reading device id msb\n"); + return NULL; + } + + id = response << 8; + + command[0] = SST25L_CMD_READ_ID; + command[1] = 0; + command[2] = 0; + command[3] = 1; + err = spi_write_then_read(spi, command, sizeof(command), &response, 1); + if (err < 0) { + dev_err(&spi->dev, "error reading device id lsb\n"); + return NULL; + } + + id |= response; + + for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++) + if (sst25l_flash_info[i].device_id == id) + flash_info = &sst25l_flash_info[i]; + + if (!flash_info) + dev_err(&spi->dev, "unknown id %.4x\n", id); + + return flash_info; +} + +static int __init sst25l_probe(struct spi_device *spi) +{ + struct flash_info *flash_info; + struct sst25l_flash *flash; + struct flash_platform_data *data; + int ret, i; + + flash_info = sst25l_match_device(spi); + if (!flash_info) + return -ENODEV; + + flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL); + if (!flash) + return -ENOMEM; + + flash->spi = spi; + mutex_init(&flash->lock); + dev_set_drvdata(&spi->dev, flash); + + data = spi->dev.platform_data; + if (data && data->name) + flash->mtd.name = data->name; + else + flash->mtd.name = dev_name(&spi->dev); + + flash->mtd.type = MTD_NORFLASH; + flash->mtd.flags = MTD_CAP_NORFLASH; + flash->mtd.erasesize = flash_info->erase_size; + flash->mtd.writesize = flash_info->page_size; + flash->mtd.size = flash_info->page_size * flash_info->nr_pages; + flash->mtd.erase = sst25l_erase; + flash->mtd.read = sst25l_read; + flash->mtd.write = sst25l_write; + + dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name, + (long long)flash->mtd.size >> 10); + + DEBUG(MTD_DEBUG_LEVEL2, + "mtd .name = %s, .size = 0x%llx (%lldMiB) " + ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", + flash->mtd.name, + (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20), + flash->mtd.erasesize, flash->mtd.erasesize / 1024, + flash->mtd.numeraseregions); + + if (flash->mtd.numeraseregions) + for (i = 0; i < flash->mtd.numeraseregions; i++) + DEBUG(MTD_DEBUG_LEVEL2, + "mtd.eraseregions[%d] = { .offset = 0x%llx, " + ".erasesize = 0x%.8x (%uKiB), " + ".numblocks = %d }\n", + i, (long long)flash->mtd.eraseregions[i].offset, + flash->mtd.eraseregions[i].erasesize, + flash->mtd.eraseregions[i].erasesize / 1024, + flash->mtd.eraseregions[i].numblocks); + + if (mtd_has_partitions()) { + struct mtd_partition *parts = NULL; + int nr_parts = 0; + + if (mtd_has_cmdlinepart()) { + static const char *part_probes[] = + {"cmdlinepart", NULL}; + + nr_parts = parse_mtd_partitions(&flash->mtd, + part_probes, + &parts, 0); + } + + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; + } + + if (nr_parts > 0) { + for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%llx, " + ".size = 0x%llx (%lldKiB) }\n", + i, parts[i].name, + (long long)parts[i].offset, + (long long)parts[i].size, + (long long)(parts[i].size >> 10)); + } + + flash->partitioned = 1; + return add_mtd_partitions(&flash->mtd, + parts, nr_parts); + } + + } else if (data->nr_parts) { + dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", + data->nr_parts, data->name); + } + + ret = add_mtd_device(&flash->mtd); + if (ret == 1) { + kfree(flash); + dev_set_drvdata(&spi->dev, NULL); + return -ENODEV; + } + + return 0; +} + +static int __exit sst25l_remove(struct spi_device *spi) +{ + struct sst25l_flash *flash = dev_get_drvdata(&spi->dev); + int ret; + + if (mtd_has_partitions() && flash->partitioned) + ret = del_mtd_partitions(&flash->mtd); + else + ret = del_mtd_device(&flash->mtd); + if (ret == 0) + kfree(flash); + return ret; +} + +static struct spi_driver sst25l_driver = { + .driver = { + .name = "sst25l", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = sst25l_probe, + .remove = __exit_p(sst25l_remove), +}; + +static int __init sst25l_init(void) +{ + return spi_register_driver(&sst25l_driver); +} + +static void __exit sst25l_exit(void) +{ + spi_unregister_driver(&sst25l_driver); +} + +module_init(sst25l_init); +module_exit(sst25l_exit); + +MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips"); +MODULE_AUTHOR("Andre Renaud , " + "Ryan Mallon "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 2eaaa5ff87c675aacd3a869fc5fe75a35bbd5278 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 18 Sep 2009 12:51:42 -0700 Subject: mtd: sst25l, fix lock imbalance Add an omitted unlock to one sst25l_erase fail path. Signed-off-by: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/sst25l.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index ac7d52b420c..c2baf3353f8 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -180,8 +180,10 @@ static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr) mutex_lock(&flash->lock); err = sst25l_wait_till_ready(flash); - if (err) + if (err) { + mutex_unlock(&flash->lock); return err; + } while (addr < end) { err = sst25l_erase_sector(flash, addr); -- cgit v1.2.3 From f33dabbe79fdf7a8568c65faa1db7794c87ac4d3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 18 Sep 2009 12:51:43 -0700 Subject: mtd: nand: register orion_nand using platform_driver_probe() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit orion_nand_probe lives in .init.text, so using platform_driver_register to register it is wrong because binding a device after the init memory is discarded (e.g. via sysfs) results in an oops. As requested by Nicolas Pitre platform_driver_probe is used instead of moving the probe function to .devinit.text as proposed initially. This saves some memory, but devices registered after the driver is probed are not bound (probably there are none) and binding via sysfs isn't possible. Signed-off-by: Uwe Kleine-König Cc: Lennert Buytenhek Cc: Saeed Bishara Cc: Joern Engel Acked-by: Nicolas Pitre Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/orion_nand.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 0d9d4bc9c76..f59c07427af 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -171,7 +171,6 @@ static int __devexit orion_nand_remove(struct platform_device *pdev) } static struct platform_driver orion_nand_driver = { - .probe = orion_nand_probe, .remove = __devexit_p(orion_nand_remove), .driver = { .name = "orion_nand", @@ -181,7 +180,7 @@ static struct platform_driver orion_nand_driver = { static int __init orion_nand_init(void) { - return platform_driver_register(&orion_nand_driver); + return platform_driver_probe(&orion_nand_driver, orion_nand_probe); } static void __exit orion_nand_exit(void) -- cgit v1.2.3 From 778dbcc1ebea6f9a560020110987449bf4607e5f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 18 Sep 2009 12:51:44 -0700 Subject: mtd: onenand: make onenand/generic.c more generic Remove the ARM dependency from the generic "onenand" platform device driver. This change makes the driver useful for other architectures as well. Needed for the SuperH kfr2r09 board. Apart from the obvious Kconfig bits, the most important change is the move away from ARM specific includes and platform data. Together with this change the only in-tree board code gets an update, and the driver name is also changed gracefully break potential out of tree drivers. The driver is also updated to allow NULL as platform data together with a few changes to make use of resource_size() and dev_name(). Signed-off-by: Magnus Damm Cc: Paul Mundt Cc: Tony Lindgren Cc: Kyungmin Park Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/onenand/Kconfig | 1 - drivers/mtd/onenand/generic.c | 24 ++++++++++++++---------- 2 files changed, 14 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 3a094d1bf8c..a38f580c2bb 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -24,7 +24,6 @@ config MTD_ONENAND_VERIFY_WRITE config MTD_ONENAND_GENERIC tristate "OneNAND Flash device via platform device driver" - depends on ARM help Support for OneNAND flash via platform device driver. diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 3a496c33fb5..e78914938c5 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -19,12 +19,16 @@ #include #include #include - #include -#include - -#define DRIVER_NAME "onenand" +/* + * Note: Driver name and platform data format have been updated! + * + * This version of the driver is named "onenand-flash" and takes struct + * onenand_platform_data as platform data. The old ARM-specific version + * with the name "onenand" used to take struct flash_platform_data. + */ +#define DRIVER_NAME "onenand-flash" #ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL, }; @@ -39,16 +43,16 @@ struct onenand_info { static int __devinit generic_onenand_probe(struct platform_device *pdev) { struct onenand_info *info; - struct flash_platform_data *pdata = pdev->dev.platform_data; + struct onenand_platform_data *pdata = pdev->dev.platform_data; struct resource *res = pdev->resource; - unsigned long size = res->end - res->start + 1; + unsigned long size = resource_size(res); int err; info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL); if (!info) return -ENOMEM; - if (!request_mem_region(res->start, size, pdev->dev.driver->name)) { + if (!request_mem_region(res->start, size, dev_name(&pdev->dev))) { err = -EBUSY; goto out_free_info; } @@ -59,7 +63,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev) goto out_release_mem_region; } - info->onenand.mmcontrol = pdata->mmcontrol; + info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0; info->onenand.irq = platform_get_irq(pdev, 0); info->mtd.name = dev_name(&pdev->dev); @@ -75,7 +79,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev) err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(&info->mtd, info->parts, err); - else if (err <= 0 && pdata->parts) + else if (err <= 0 && pdata && pdata->parts) add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); else #endif @@ -99,7 +103,7 @@ static int __devexit generic_onenand_remove(struct platform_device *pdev) { struct onenand_info *info = platform_get_drvdata(pdev); struct resource *res = pdev->resource; - unsigned long size = res->end - res->start + 1; + unsigned long size = resource_size(res); platform_set_drvdata(pdev, NULL); -- cgit v1.2.3 From 46a8cf2df2232c0051f29716ff8a166ebeb08daf Mon Sep 17 00:00:00 2001 From: Sneha Narnakaje Date: Fri, 18 Sep 2009 12:51:46 -0700 Subject: mtd: nand: add "page" parameter to all read_page/read_page_raw APIs This patch adds a new "page" parameter to all NAND read_page/read_page_raw APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the page information to send the READOOB command and read the OOB area before the data area. Reviewed-by: David Brownell Signed-off-by: Sneha Narnakaje Signed-off-by: Sandeep Paulraj Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 2 +- drivers/mtd/nand/cafe_nand.c | 2 +- drivers/mtd/nand/fsl_elbc_nand.c | 3 ++- drivers/mtd/nand/nand_base.c | 18 ++++++++++-------- drivers/mtd/nand/sh_flctl.c | 2 +- 5 files changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 20c828ba940..f8e9975c86e 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -218,7 +218,7 @@ static int atmel_nand_calculate(struct mtd_info *mtd, * buf: buffer to store read data */ static int atmel_nand_read_page(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf) + struct nand_chip *chip, uint8_t *buf, int page) { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 29acd06b1c3..a70f40e161d 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -381,7 +381,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, * we need a special oob layout and handling. */ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { struct cafe_priv *cafe = mtd->priv; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 1f6eb257871..ddd37d2554e 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -739,7 +739,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, + int page) { fsl_elbc_read_buf(mtd, buf, mtd->writesize); fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 4c5e8a74e1b..17bbd506202 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -765,7 +765,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) * Not for syndrome calculating ecc controllers, which use a special oob layout */ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { chip->read_buf(mtd, buf, mtd->writesize); chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); @@ -781,7 +781,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * We need a special oob layout and handling even when OOB isn't used. */ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -820,7 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c * @buf: buffer to store read data */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -830,7 +830,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *ecc_code = chip->buffers->ecccode; uint32_t *eccpos = chip->ecc.layout->eccpos; - chip->ecc.read_page_raw(mtd, chip, buf); + chip->ecc.read_page_raw(mtd, chip, buf, page); for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) chip->ecc.calculate(mtd, p, &ecc_calc[i]); @@ -943,7 +943,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3 * Not for syndrome calculating ecc controllers which need a special oob layout */ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -988,7 +988,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * we need a special oob layout and handling. */ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; @@ -1130,11 +1130,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Now read the page into the buffer */ if (unlikely(ops->mode == MTD_OOB_RAW)) - ret = chip->ecc.read_page_raw(mtd, chip, bufpoi); + ret = chip->ecc.read_page_raw(mtd, chip, + bufpoi, page); else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else - ret = chip->ecc.read_page(mtd, chip, bufpoi); + ret = chip->ecc.read_page(mtd, chip, bufpoi, + page); if (ret < 0) break; diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 2bc896623e2..c5df28596a4 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -329,7 +329,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va } static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, - uint8_t *buf) + uint8_t *buf, int page) { int i, eccsize = chip->ecc.size; int eccbytes = chip->ecc.bytes; -- cgit v1.2.3 From 6e0cb135b3f3713b95ea41a11155e83a8c70f5f8 Mon Sep 17 00:00:00 2001 From: Sneha Narnakaje Date: Fri, 18 Sep 2009 12:51:47 -0700 Subject: mtd: nand: add new ECC mode - ECC_HW_OOB_FIRST This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to support 4-bit ECC on TI DaVinci devices with large page (up to 2KiB) NAND chips. This ECC mode is similar to NAND_ECC_HW, with the exception of read_page API that first reads the OOB area, reads the data in chunks, feeds the ECC from OOB area to the ECC hw engine and perform any correction on the data as per the ECC status reported by the engine. "ECC_HW_OOB_FIRST" name suggested by Thomas Gleixner Reviewed-by: David Brownell Signed-off-by: Sneha Narnakaje Signed-off-by: Sandeep Paulraj Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 61 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 17bbd506202..22113865438 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -978,6 +978,54 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +/** + * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * + * Hardware ECC for large page chips, require OOB to be read first. + * For this ECC mode, the write_page method is re-used from ECC_HW. + * These methods read/write ECC from the OOB area, unlike the + * ECC_HW_SYNDROME support with multiple ECC steps, follows the + * "infix ECC" scheme and reads/writes ECC from the data area, by + * overwriting the NAND manufacturer bad block markings. + */ +static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int page) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *ecc_calc = chip->buffers->ecccalc; + + /* Read the OOB area first */ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} + /** * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read * @mtd: mtd info structure @@ -2673,6 +2721,17 @@ int nand_scan_tail(struct mtd_info *mtd) */ switch (chip->ecc.mode) { + case NAND_ECC_HW_OOB_FIRST: + /* Similar to NAND_ECC_HW, but a separate read_page handle */ + if (!chip->ecc.calculate || !chip->ecc.correct || + !chip->ecc.hwctl) { + printk(KERN_WARNING "No ECC functions supplied; " + "Hardware ECC not possible\n"); + BUG(); + } + if (!chip->ecc.read_page) + chip->ecc.read_page = nand_read_page_hwecc_oob_first; + case NAND_ECC_HW: /* Use standard hwecc read page function ? */ if (!chip->ecc.read_page) @@ -2695,7 +2754,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.read_page == nand_read_page_hwecc || !chip->ecc.write_page || chip->ecc.write_page == nand_write_page_hwecc)) { - printk(KERN_WARNING "No ECC functions supplied, " + printk(KERN_WARNING "No ECC functions supplied; " "Hardware ECC not possible\n"); BUG(); } -- cgit v1.2.3 From f12a9473283e68ae708e9ada37cb352ea2652397 Mon Sep 17 00:00:00 2001 From: Sneha Narnakaje Date: Fri, 18 Sep 2009 12:51:48 -0700 Subject: mtd: nand: DaVinci: Add 4-bit ECC support for large page NAND chips This patch adds 4-bit ECC support for large page NAND chips using the new ECC mode NAND_ECC_HW_OOB_FIRST. The platform data from board-dm355-evm has been adjusted to use this mode. The patches have been verified on DM355 device with 2KiB-page Micron devices using mtd-tests and JFFS2. Error correction up to 4 bits has also been verified using nandwrite/nanddump utilities. Reviewed-by: David Brownell Signed-off-by: Sneha Narnakaje Signed-off-by: Sandeep Paulraj Cc: Thomas Gleixner Cc: Troy Kisky Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/davinci_nand.c | 45 +++++++++++++++++++++++++++++++++++------ 1 file changed, 39 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 0fad6487e6f..f13f5b9afaf 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -348,6 +348,12 @@ compare: if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3])) return 0; + /* + * Clear any previous address calculation by doing a dummy read of an + * error address register. + */ + davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET); + /* Start address calculation, and wait for it to complete. * We _could_ start reading more data while this is working, * to speed up the overall page read. @@ -359,8 +365,10 @@ compare: switch ((fsr >> 8) & 0x0f) { case 0: /* no error, should not happen */ + davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET); return 0; case 1: /* five or more errors detected */ + davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET); return -EIO; case 2: /* error addresses computed */ case 3: @@ -500,6 +508,26 @@ static struct nand_ecclayout hwecc4_small __initconst = { }, }; +/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash, + * storing ten ECC bytes plus the manufacturer's bad block marker byte, + * and not overlapping the default BBT markers. + */ +static struct nand_ecclayout hwecc4_2048 __initconst = { + .eccbytes = 40, + .eccpos = { + /* at the end of spare sector */ + 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, + 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, + 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + }, + .oobfree = { + /* 2 bytes at offset 0 hold manufacturer badblock markers */ + {.offset = 2, .length = 22, }, + /* 5 bytes at offset 8 hold BBT markers */ + /* 8 bytes at offset 16 hold JFFS2 clean markers */ + }, +}; static int __init nand_davinci_probe(struct platform_device *pdev) { @@ -690,15 +718,20 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->mtd.oobsize - 16; goto syndrome_done; } + if (chunks == 4) { + info->ecclayout = hwecc4_2048; + info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; + goto syndrome_done; + } - /* For large page chips we'll be wanting to use a - * not-yet-implemented mode that reads OOB data - * before reading the body of the page, to avoid - * the "infix OOB" model of NAND_ECC_HW_SYNDROME - * (and preserve manufacturer badblock markings). + /* 4KiB page chips are not yet supported. The eccpos from + * nand_ecclayout cannot hold 80 bytes and change to eccpos[] + * breaks userspace ioctl interface with mtd-utils. Once we + * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used + * for the 4KiB page chips. */ dev_warn(&pdev->dev, "no 4-bit ECC support yet " - "for large page NAND\n"); + "for 4KiB-page NAND\n"); ret = -EIO; goto err_scan; -- cgit v1.2.3 From 4c1e6b2ce13b154a4a69cee220c98976f4b784df Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Sep 2009 12:51:49 -0700 Subject: mtd: lart: Prevent a read from mtd->eraseregions[-1] Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/devices/lart.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 578de1c67bf..f4359fe7150 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -393,7 +393,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr) * erase range is aligned with the erase size which is in * effect here. */ - if (instr->addr & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL); + if (i < 0 || (instr->addr & (mtd->eraseregions[i].erasesize - 1))) + return -EINVAL; /* Remember the erase region we start on */ first = i; @@ -409,7 +410,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr) i--; /* is the end aligned on a block boundary? */ - if ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL); + if (i < 0 || ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1))) + return -EINVAL; addr = instr->addr; len = instr->len; -- cgit v1.2.3 From ebf2e93036907fe2a7ddab942aa63d35f97f3b2b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Sep 2009 12:51:49 -0700 Subject: mtd: mtdconcat: prevent a read from eraseregions[-1] If the erase region was found in the first iteration we read from eraseregions[-1] Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/mtdconcat.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 792b547786b..db6de74082a 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -427,7 +427,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) * to-be-erased area begins. Verify that the starting * offset is aligned to this region's erase size: */ - if (instr->addr & (erase_regions[i].erasesize - 1)) + if (i < 0 || instr->addr & (erase_regions[i].erasesize - 1)) return -EINVAL; /* @@ -440,8 +440,8 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr) /* * check if the ending offset is aligned to this region's erase size */ - if ((instr->addr + instr->len) & (erase_regions[i].erasesize - - 1)) + if (i < 0 || ((instr->addr + instr->len) & + (erase_regions[i].erasesize - 1))) return -EINVAL; } -- cgit v1.2.3 From a57ca0466af5da83e379d636b8c01fd53b41e2c6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 18 Sep 2009 12:51:50 -0700 Subject: mtd: mtdpart: prevent a read from regions[-1] If the erase region was found in the first iteration we read from regions[-1] Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/mtdpart.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 349fcbe5cc0..a83cfa1ad12 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -453,7 +453,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master, for (i = 0; i < max && regions[i].offset <= slave->offset; i++) ; /* The loop searched for the region _behind_ the first one */ - i--; + if (i > 0) + i--; /* Pick biggest erasesize */ for (; i < max && regions[i].offset < end; i++) { -- cgit v1.2.3 From 9aff1b1afe9a30c358d1c3a0bb50ae77bd7f994b Mon Sep 17 00:00:00 2001 From: Hiroshi Ito Date: Fri, 18 Sep 2009 12:51:51 -0700 Subject: mtd: jedec_probe: fix NEC uPD29F064115 detection linux v2.6.31-rc6 can not detect NEC uPD29F064115. uPD29F064115 is a 16 bit device. datasheet: http://www.cn.necel.com/memory/cn/download/M16062EJ2V0DS00.pdf This applies the same fix as used for SST chips in commit ca6f12c67ed19718cf37d0f531af9438de85b70c ("jedec_probe: Fix SST 16-bit chip detection"). Signed-off-by: Hiroshi Ito Cc: Atsushi Nemoto Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/chips/jedec_probe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index ccc4cfc7e4b..0f7065d190f 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1156,8 +1156,8 @@ static const struct amd_flash_info jedec_table[] = { .mfr_id = MANUFACTURER_NEC, .dev_id = UPD29F064115, .name = "NEC uPD29F064115", - .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, - .uaddr = MTD_UADDR_0x0555_0x02AA, /* ???? */ + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, .dev_size = SIZE_8MiB, .cmd_set = P_ID_AMD_STD, .nr_regions = 3, -- cgit v1.2.3 From 3ff230a742b8fc196c1fe69875a57a429877cacb Mon Sep 17 00:00:00 2001 From: Timofei Bondarenko Date: Wed, 20 May 2009 19:59:02 -0400 Subject: mtd/maps: uclinux: fix building when partition support is disabled The uClinux map driver doesn't even use partitions, so we shouldn't require it in order to work properly. Signed-off-by: Timofei Bondarenko Signed-off-by: Mike Frysinger Signed-off-by: Sonic Zhang CC: Greg Ungerer CC: uclinux-dev@uclinux.org CC: linux-mtd@lists.infradead.org Signed-off-by: David Woodhouse --- drivers/mtd/maps/uclinux.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index d4314fb8821..35009294b43 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -89,7 +89,11 @@ static int __init uclinux_mtd_init(void) mtd->priv = mapp; uclinux_ram_mtdinfo = mtd; +#ifdef CONFIG_MTD_PARTITIONS add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS); +#else + add_mtd_device(mtd); +#endif return(0); } @@ -99,7 +103,11 @@ static int __init uclinux_mtd_init(void) static void __exit uclinux_mtd_cleanup(void) { if (uclinux_ram_mtdinfo) { +#ifdef CONFIG_MTD_PARTITIONS del_mtd_partitions(uclinux_ram_mtdinfo); +#else + del_mtd_device(uclinux_ram_mtdinfo); +#endif map_destroy(uclinux_ram_mtdinfo); uclinux_ram_mtdinfo = NULL; } -- cgit v1.2.3 From 1b533d227e5f8356d2f009f90b8c8c1f02eb71b8 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 9 Jun 2009 10:37:18 +0000 Subject: mtd/maps: uclinux: depend on MTD_RAM being built into the kernel If MTD_RAM is built as a module, the uClinux map does not work since it can only be built in to the kernel. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 7a58bd5522f..0f314eb430c 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -486,7 +486,7 @@ config MTD_BFIN_ASYNC config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" - depends on MTD_PARTITIONS && MTD_RAM && !MMU + depends on MTD_PARTITIONS && MTD_RAM=y && !MMU help Map driver to support image based filesystems for uClinux. -- cgit v1.2.3 From d79c326c048246b855b83a0092e6324df0717735 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 May 2009 12:04:09 -0400 Subject: mtd/maps: gpio-addr-flash: new driver for GPIO assisted flash addressing This driver lets people use GPIO's for additional address lines in case their processor does not have enough address lines already. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 10 ++ drivers/mtd/maps/Makefile | 3 +- drivers/mtd/maps/gpio-addr-flash.c | 311 +++++++++++++++++++++++++++++++++++++ 3 files changed, 322 insertions(+), 2 deletions(-) create mode 100644 drivers/mtd/maps/gpio-addr-flash.c (limited to 'drivers') diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 0f314eb430c..3a9a960644b 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -484,6 +484,16 @@ config MTD_BFIN_ASYNC If compiled as a module, it will be called bfin-async-flash. +config MTD_GPIO_ADDR + tristate "GPIO-assisted Flash Chip Support" + depends on MTD_COMPLEX_MAPPINGS + select MTD_PARTITIONS + help + Map driver which allows flashes to be partially physically addressed + and assisted by GPIOs. + + If compiled as a module, it will be called gpio-addr-flash. + config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" depends on MTD_PARTITIONS && MTD_RAM=y && !MMU diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 5beb0662d72..1d5cf863672 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,5 +58,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o -obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o -obj-$(CONFIG_MTD_VMU) += vmu-flash.o +obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c new file mode 100644 index 00000000000..44ef9a49a86 --- /dev/null +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -0,0 +1,311 @@ +/* + * drivers/mtd/maps/gpio-addr-flash.c + * + * Handle the case where a flash device is mostly addressed using physical + * line and supplemented by GPIOs. This way you can hook up say a 8MiB flash + * to a 2MiB memory range and use the GPIOs to select a particular range. + * + * Copyright © 2000 Nicolas Pitre + * Copyright © 2005-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) + +#define DRIVER_NAME "gpio-addr-flash" +#define PFX DRIVER_NAME ": " + +/** + * struct async_state - keep GPIO flash state + * @mtd: MTD state for this mapping + * @map: MTD map state for this flash + * @gpio_count: number of GPIOs used to address + * @gpio_addrs: array of GPIOs to twiddle + * @gpio_values: cached GPIO values + * @win_size: dedicated memory size (if no GPIOs) + */ +struct async_state { + struct mtd_info *mtd; + struct map_info map; + size_t gpio_count; + unsigned *gpio_addrs; + int *gpio_values; + unsigned long win_size; +}; +#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1) + +/** + * gf_set_gpios() - set GPIO address lines to access specified flash offset + * @state: GPIO flash state + * @ofs: desired offset to access + * + * Rather than call the GPIO framework every time, cache the last-programmed + * value. This speeds up sequential accesses (which are by far the most common + * type). We rely on the GPIO framework to treat non-zero value as high so + * that we don't have to normalize the bits. + */ +static void gf_set_gpios(struct async_state *state, unsigned long ofs) +{ + size_t i = 0; + int value; + ofs /= state->win_size; + do { + value = ofs & (1 << i); + if (state->gpio_values[i] != value) { + gpio_set_value(state->gpio_addrs[i], value); + state->gpio_values[i] = value; + } + } while (++i < state->gpio_count); +} + +/** + * gf_read() - read a word at the specified offset + * @map: MTD map state + * @ofs: desired offset to read + */ +static map_word gf_read(struct map_info *map, unsigned long ofs) +{ + struct async_state *state = gf_map_info_to_state(map); + uint16_t word; + map_word test; + + gf_set_gpios(state, ofs); + + word = readw(map->virt + (ofs % state->win_size)); + test.x[0] = word; + return test; +} + +/** + * gf_copy_from() - copy a chunk of data from the flash + * @map: MTD map state + * @to: memory to copy to + * @from: flash offset to copy from + * @len: how much to copy + * + * We rely on the MTD layer to chunk up copies such that a single request here + * will not cross a window size. This allows us to only wiggle the GPIOs once + * before falling back to a normal memcpy. Reading the higher layer code shows + * that this is indeed the case, but add a BUG_ON() to future proof. + */ +static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + struct async_state *state = gf_map_info_to_state(map); + + gf_set_gpios(state, from); + + /* BUG if operation crosses the win_size */ + BUG_ON(!((from + len) % state->win_size <= (from + len))); + + /* operation does not cross the win_size, so one shot it */ + memcpy_fromio(to, map->virt + (from % state->win_size), len); +} + +/** + * gf_write() - write a word at the specified offset + * @map: MTD map state + * @ofs: desired offset to write + */ +static void gf_write(struct map_info *map, map_word d1, unsigned long ofs) +{ + struct async_state *state = gf_map_info_to_state(map); + uint16_t d; + + gf_set_gpios(state, ofs); + + d = d1.x[0]; + writew(d, map->virt + (ofs % state->win_size)); +} + +/** + * gf_copy_to() - copy a chunk of data to the flash + * @map: MTD map state + * @to: flash offset to copy to + * @from: memory to copy from + * @len: how much to copy + * + * See gf_copy_from() caveat. + */ +static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + struct async_state *state = gf_map_info_to_state(map); + + gf_set_gpios(state, to); + + /* BUG if operation crosses the win_size */ + BUG_ON(!((to + len) % state->win_size <= (to + len))); + + /* operation does not cross the win_size, so one shot it */ + memcpy_toio(map->virt + (to % state->win_size), from, len); +} + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; +#endif + +/** + * gpio_flash_probe() - setup a mapping for a GPIO assisted flash + * @pdev: platform device + * + * The platform resource layout expected looks something like: + * struct mtd_partition partitions[] = { ... }; + * struct physmap_flash_data flash_data = { ... }; + * unsigned flash_gpios[] = { GPIO_XX, GPIO_XX, ... }; + * struct resource flash_resource[] = { + * { + * .name = "cfi_probe", + * .start = 0x20000000, + * .end = 0x201fffff, + * .flags = IORESOURCE_MEM, + * }, { + * .start = (unsigned long)flash_gpios, + * .end = ARRAY_SIZE(flash_gpios), + * .flags = IORESOURCE_IRQ, + * } + * }; + * struct platform_device flash_device = { + * .name = "gpio-addr-flash", + * .dev = { .platform_data = &flash_data, }, + * .num_resources = ARRAY_SIZE(flash_resource), + * .resource = flash_resource, + * ... + * }; + */ +static int __devinit gpio_flash_probe(struct platform_device *pdev) +{ + int ret; + size_t i, arr_size; + struct physmap_flash_data *pdata; + struct resource *memory; + struct resource *gpios; + struct async_state *state; + + pdata = pdev->dev.platform_data; + memory = platform_get_resource(pdev, IORESOURCE_MEM, 0); + gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (!memory || !gpios || !gpios->end) + return -EINVAL; + + arr_size = sizeof(int) * gpios->end; + state = kzalloc(sizeof(*state) + arr_size, GFP_KERNEL); + if (!state) + return -ENOMEM; + + state->gpio_count = gpios->end; + state->gpio_addrs = (void *)gpios->start; + state->gpio_values = (void *)(state + 1); + state->win_size = memory->end - memory->start + 1; + memset(state->gpio_values, 0xff, arr_size); + + state->map.name = DRIVER_NAME; + state->map.read = gf_read; + state->map.copy_from = gf_copy_from; + state->map.write = gf_write; + state->map.copy_to = gf_copy_to; + state->map.bankwidth = pdata->width; + state->map.size = state->win_size * (1 << state->gpio_count); + state->map.virt = (void __iomem *)memory->start; + state->map.phys = NO_XIP; + state->map.map_priv_1 = (unsigned long)state; + + platform_set_drvdata(pdev, state); + + i = 0; + do { + if (gpio_request(state->gpio_addrs[i], DRIVER_NAME)) { + pr_devinit(KERN_ERR PFX "failed to request gpio %d\n", + state->gpio_addrs[i]); + while (i--) + gpio_free(state->gpio_addrs[i]); + kfree(state); + return -EBUSY; + } + gpio_direction_output(state->gpio_addrs[i], 0); + } while (++i < state->gpio_count); + + pr_devinit(KERN_NOTICE PFX "probing %d-bit flash bus\n", + state->map.bankwidth * 8); + state->mtd = do_map_probe(memory->name, &state->map); + if (!state->mtd) { + for (i = 0; i < state->gpio_count; ++i) + gpio_free(state->gpio_addrs[i]); + kfree(state); + return -ENXIO; + } + +#ifdef CONFIG_MTD_PARTITIONS + ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); + if (ret > 0) { + pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n"); + add_mtd_partitions(state->mtd, pdata->parts, ret); + kfree(pdata->parts); + + } else if (pdata->nr_parts) { + pr_devinit(KERN_NOTICE PFX "Using board partition definition\n"); + add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts); + + } else +#endif + { + pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n"); + add_mtd_device(state->mtd); + } + + return 0; +} + +static int __devexit gpio_flash_remove(struct platform_device *pdev) +{ + struct async_state *state = platform_get_drvdata(pdev); + size_t i = 0; + do { + gpio_free(state->gpio_addrs[i]); + } while (++i < state->gpio_count); +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(state->mtd); +#endif + map_destroy(state->mtd); + kfree(state); + return 0; +} + +static struct platform_driver gpio_flash_driver = { + .probe = gpio_flash_probe, + .remove = __devexit_p(gpio_flash_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init gpio_flash_init(void) +{ + return platform_driver_register(&gpio_flash_driver); +} +module_init(gpio_flash_init); + +static void __exit gpio_flash_exit(void) +{ + platform_driver_unregister(&gpio_flash_driver); +} +module_exit(gpio_flash_exit); + +MODULE_AUTHOR("Mike Frysinger "); +MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 80f53da0ac752fe16a01ffeddaea658670974a05 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 13 Jun 2009 06:15:18 -0400 Subject: mtd: fix order of TEST/PARTITIONS kconfig options The MTD_TEST config option was added in between the MTD_PARTITIONS config and its dependent options which causes the resulting menu system to display incorrectly as MTD_TEST does not depend on MTD_PARTITIONS. So move it up a few lines where it won't cause a problem. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/Kconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index b8e35a0b4d7..e4ec3659759 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -25,6 +25,14 @@ config MTD_DEBUG_VERBOSE help Determines the verbosity level of the MTD debugging messages. +config MTD_TESTS + tristate "MTD tests support" + depends on m + help + This option includes various MTD tests into compilation. The tests + should normally be compiled as kernel modules. The modules perform + various checks and verifications when loaded. + config MTD_CONCAT tristate "MTD concatenating support" help @@ -45,14 +53,6 @@ config MTD_PARTITIONS devices. Partitioning on NFTL 'devices' is a different - that's the 'normal' form of partitioning used on a block device. -config MTD_TESTS - tristate "MTD tests support" - depends on m - help - This option includes various MTD tests into compilation. The tests - should normally be compiled as kernel modules. The modules perform - various checks and verifications when loaded. - config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" depends on MTD_PARTITIONS -- cgit v1.2.3 From 49aac4aec53c523f16343b4668a5a239b69659f1 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Mon, 15 Jun 2009 08:23:41 +0000 Subject: mtd: m25p80: add support for AAI programming with SST SPI flashes The SST SPI flashes are a bit non-standard in that they can be programmed one byte at a time (including address!), or they can be written two bytes at a time with auto address incrementing (AAI). The latter form is obviously much better for performance, so let's use it when possible. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 126 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 125 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 6d8d265ae91..53de9f05ad5 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -44,6 +44,11 @@ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ #define OPCODE_RDID 0x9f /* Read JEDEC ID */ +/* Used for SST flashes only. */ +#define OPCODE_BP 0x02 /* Byte program */ +#define OPCODE_WRDI 0x04 /* Write disable */ +#define OPCODE_AAI_WP 0xad /* Auto address increment word program */ + /* Status Register bits. */ #define SR_WIP 1 /* Write in progress */ #define SR_WEL 2 /* Write enable latch */ @@ -132,6 +137,15 @@ static inline int write_enable(struct m25p *flash) return spi_write_then_read(flash->spi, &code, 1, NULL, 0); } +/* + * Send write disble instruction to the chip. + */ +static inline int write_disable(struct m25p *flash) +{ + u8 code = OPCODE_WRDI; + + return spi_write_then_read(flash->spi, &code, 1, NULL, 0); +} /* * Service routine to read status register until ready, or timeout occurs. @@ -454,6 +468,111 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct m25p *flash = mtd_to_m25p(mtd); + struct spi_transfer t[2]; + struct spi_message m; + size_t actual; + int cmd_sz, ret; + + if (retlen) + *retlen = 0; + + /* sanity checks */ + if (!len) + return 0; + + if (to + len > flash->mtd.size) + return -EINVAL; + + spi_message_init(&m); + memset(t, 0, (sizeof t)); + + t[0].tx_buf = flash->command; + t[0].len = CMD_SIZE; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + spi_message_add_tail(&t[1], &m); + + mutex_lock(&flash->lock); + + /* Wait until finished previous write command. */ + ret = wait_till_ready(flash); + if (ret) + goto time_out; + + write_enable(flash); + + actual = to % 2; + /* Start write from odd address. */ + if (actual) { + flash->command[0] = OPCODE_BP; + flash->command[1] = to >> 16; + flash->command[2] = to >> 8; + flash->command[3] = to; + + /* write one byte. */ + t[1].len = 1; + spi_sync(flash->spi, &m); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + *retlen += m.actual_length - CMD_SIZE; + } + to += actual; + + flash->command[0] = OPCODE_AAI_WP; + flash->command[1] = to >> 16; + flash->command[2] = to >> 8; + flash->command[3] = to; + + /* Write out most of the data here. */ + cmd_sz = CMD_SIZE; + for (; actual < len - 1; actual += 2) { + t[0].len = cmd_sz; + /* write two bytes. */ + t[1].len = 2; + t[1].tx_buf = buf + actual; + + spi_sync(flash->spi, &m); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + *retlen += m.actual_length - cmd_sz; + cmd_sz = 1; + to += 2; + } + write_disable(flash); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + + /* Write out trailing byte if it exists. */ + if (actual != len) { + write_enable(flash); + flash->command[0] = OPCODE_BP; + flash->command[1] = to >> 16; + flash->command[2] = to >> 8; + flash->command[3] = to; + t[0].len = CMD_SIZE; + t[1].len = 1; + t[1].tx_buf = buf + actual; + + spi_sync(flash->spi, &m); + ret = wait_till_ready(flash); + if (ret) + goto time_out; + *retlen += m.actual_length - CMD_SIZE; + write_disable(flash); + } + +time_out: + mutex_unlock(&flash->lock); + return ret; +} /****************************************************************************/ @@ -670,7 +789,12 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.size = info->sector_size * info->n_sectors; flash->mtd.erase = m25p80_erase; flash->mtd.read = m25p80_read; - flash->mtd.write = m25p80_write; + + /* sst flash chips use AAI word program */ + if (info->jedec_id >> 16 == 0xbf) + flash->mtd.write = sst_write; + else + flash->mtd.write = m25p80_write; /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { -- cgit v1.2.3 From aa3651e4625e21c2eb8a8e504d9bbc3c2a964be0 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Mon, 15 Jun 2009 08:23:41 +0000 Subject: mtd: m25p80: add SST WF SPI flash device information Support SST25WF{512,010,020,040} SPI flashes. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 53de9f05ad5..9b78869cd8a 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -641,6 +641,10 @@ static struct flash_info __devinitdata m25p_data [] = { { "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, }, { "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, }, { "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, }, + { "sst25wf512", 0xbf2501, 0, 64 * 1024, 1, SECT_4K, }, + { "sst25wf010", 0xbf2502, 0, 64 * 1024, 2, SECT_4K, }, + { "sst25wf020", 0xbf2503, 0, 64 * 1024, 4, SECT_4K, }, + { "sst25wf040", 0xbf2504, 0, 64 * 1024, 8, SECT_4K, }, /* ST Microelectronics -- newer production may have feature updates */ { "m25p05", 0x202010, 0, 32 * 1024, 2, }, -- cgit v1.2.3 From 64da392ab08a88ad83f4c3f60283711ee090c9ef Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 16 Jun 2009 19:20:40 +0000 Subject: phram: cleanup error handling and associated messages The error handling in the phram driver is pretty bad -- in many places, errors are silently ignored or logged, but then still ignored in the return value. So convert all of the code to pass back the correct return value and log error messages properly (and using the new pr_fmt() helper). If everything does go smoothly, rather than exit silently, dump a helpful info message like pretty much every other MTD driver does. Signed-off-by: Mike Frysinger Acked-by: Joern Engel Signed-off-by: David Woodhouse --- drivers/mtd/devices/phram.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 088fbb7595b..1696bbecaa7 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -14,6 +14,9 @@ * Example: * phram=swap,64Mi,128Mi phram=test,900Mi,1Mi */ + +#define pr_fmt(fmt) "phram: " fmt + #include #include #include @@ -23,8 +26,6 @@ #include #include -#define ERROR(fmt, args...) printk(KERN_ERR "phram: " fmt , ## args) - struct phram_mtd_list { struct mtd_info mtd; struct list_head list; @@ -132,7 +133,7 @@ static int register_device(char *name, unsigned long start, unsigned long len) ret = -EIO; new->mtd.priv = ioremap(start, len); if (!new->mtd.priv) { - ERROR("ioremap failed\n"); + pr_err("ioremap failed\n"); goto out1; } @@ -152,7 +153,7 @@ static int register_device(char *name, unsigned long start, unsigned long len) ret = -EAGAIN; if (add_mtd_device(&new->mtd)) { - ERROR("Failed to register new device\n"); + pr_err("Failed to register new device\n"); goto out2; } @@ -227,8 +228,8 @@ static inline void kill_final_newline(char *str) #define parse_err(fmt, args...) do { \ - ERROR(fmt , ## args); \ - return 0; \ + pr_err(fmt , ## args); \ + return 1; \ } while (0) static int phram_setup(const char *val, struct kernel_param *kp) @@ -256,12 +257,8 @@ static int phram_setup(const char *val, struct kernel_param *kp) parse_err("not enough arguments\n"); ret = parse_name(&name, token[0]); - if (ret == -ENOMEM) - parse_err("out of memory\n"); - if (ret == -ENOSPC) - parse_err("name too long\n"); if (ret) - return 0; + return ret; ret = parse_num32(&start, token[1]); if (ret) { @@ -275,9 +272,11 @@ static int phram_setup(const char *val, struct kernel_param *kp) parse_err("illegal device length\n"); } - register_device(name, start, len); + ret = register_device(name, start, len); + if (!ret) + pr_info("%s device: %#x at %#x\n", name, len, start); - return 0; + return ret; } module_param_call(phram, phram_setup, NULL, NULL, 000); -- cgit v1.2.3 From 71b7d0d90d536ae4e70929cc59a1a9f6ba457c6c Mon Sep 17 00:00:00 2001 From: Eric Benard Date: Mon, 29 Jun 2009 13:58:01 +0200 Subject: mtd: mxc_nand: fix 2KiB pagesize NAND on i.MX27 This patch allows i.MX27 to support 2KiB pagesize NAND flash. We are using a 1.8V NAND flash which datasheet (unfortunately only available under NDA) says : Page size: x8: 2,112 bytes (2,048 + 64 bytes). Without this patch, all sectors are marked as bad eraseblock. Signed-off-by: Eric Benard Acked-by : Sascha Hauer Signed-off-by: David Woodhouse --- drivers/mtd/nand/mxc_nand.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 76beea40d2c..65b26d5a5c0 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -857,6 +857,17 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, } } +/* Define some generic bad / good block scan pattern which are used + * while scanning a device for factory marked good / bad blocks. */ +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr smallpage_memorybased = { + .options = NAND_BBT_SCAN2NDPAGE, + .offs = 5, + .len = 1, + .pattern = scan_ff_pattern +}; + static int __init mxcnd_probe(struct platform_device *pdev) { struct nand_chip *this; @@ -973,7 +984,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) goto escan; } - host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0; + if (mtd->writesize == 2048) { + host->pagesize_2k = 1; + this->badblock_pattern = &smallpage_memorybased; + } if (this->ecc.mode == NAND_ECC_HW) { switch (mtd->oobsize) { -- cgit v1.2.3 From 223cf6c3b517cf6ef040cafe45af89f3b8adba74 Mon Sep 17 00:00:00 2001 From: Yeasah Pell Date: Wed, 1 Jul 2009 18:11:35 +0300 Subject: mtd: pxa3xx_nand: add single-bit error corrections reporting Acked-by: Eric Miao Signed-off-by: Yeasah Pell Signed-off-by: Mike Rapoport Signed-off-by: David Woodhouse --- drivers/mtd/nand/pxa3xx_nand.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 30a8ce6d3e6..6ea520ae241 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -102,6 +102,7 @@ enum { ERR_SENDCMD = -2, ERR_DBERR = -3, ERR_BBERR = -4, + ERR_SBERR = -5, }; enum { @@ -564,11 +565,13 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) status = nand_readl(info, NDSR); - if (status & (NDSR_RDDREQ | NDSR_DBERR)) { + if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) { if (status & NDSR_DBERR) info->retcode = ERR_DBERR; + else if (status & NDSR_SBERR) + info->retcode = ERR_SBERR; - disable_int(info, NDSR_RDDREQ | NDSR_DBERR); + disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR); if (info->use_dma) { info->state = STATE_DMA_READING; @@ -670,7 +673,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr)) break; - pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR); + pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR); /* We only are OOB, so if the data has error, does not matter */ if (info->retcode == ERR_DBERR) @@ -687,7 +690,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr)) break; - pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR); + pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR); if (info->retcode == ERR_DBERR) { /* for blank page (all 0xff), HW will calculate its ECC as @@ -861,8 +864,12 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd, * consider it as a ecc error which will tell the caller the * read fail We have distinguish all the errors, but the * nand_read_ecc only check this function return value + * + * Corrected (single-bit) errors must also be noted. */ - if (info->retcode != ERR_NONE) + if (info->retcode == ERR_SBERR) + return 1; + else if (info->retcode != ERR_NONE) return -1; return 0; -- cgit v1.2.3 From fc28c39f0ef59bfb649ddfd633275be8e45c0f9c Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 17 Jul 2009 14:39:23 +0200 Subject: mtd: maps: add mtd-ram support to physmap_of MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use physmap_of to access RAMs as mtd and add documenation for it. This approach is a lot less intrusive as adding an of-wrapper around plat-ram.c. As most extensions of plat-ram.c (e.g. custom map-functions) can't be mapped to the device tree anyhow, extending physmap_of seems to be the cleanest approach. Tested with a phyCORE-MPC5121e. Signed-off-by: Wolfram Sang Cc: Vitaly Wool Cc: Artem Bityutskiy Cc: Ken MacLeod Cc: Albrecht Dreß Acked-by: Grant Likely Signed-off-by: David Woodhouse --- drivers/mtd/maps/physmap_of.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index e828d58910f..61e4eb48bb2 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -361,6 +361,10 @@ static struct of_device_id of_flash_match[] = { .compatible = "jedec-flash", .data = (void *)"jedec_probe", }, + { + .compatible = "mtd-ram", + .data = (void *)"map_ram", + }, { .type = "rom", .compatible = "direct-mapped" -- cgit v1.2.3 From 8bff82cbc30884fc52969608d090d874641e7196 Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Fri, 10 Jul 2009 15:17:27 +0800 Subject: mtd: add nand support for w90p910 (v2) Add w90p910 NAND driver for w90p910 evaluation board based on w90p910,there is a K8F1G08 NAND on my board. [dwmw2: depend on MTD_PARTITIONS] Signed-off-by: Wan ZongShun Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 7 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/w90p910_nand.c | 382 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 390 insertions(+) create mode 100644 drivers/mtd/nand/w90p910_nand.c (limited to 'drivers') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index ce96c091f01..707d7ee495d 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -452,4 +452,11 @@ config MTD_NAND_SOCRATES help Enables support for NAND Flash chips wired onto Socrates board. +config MTD_NAND_W90P910 + tristate "Support for NAND on w90p910 evaluation board." + depends on ARCH_W90X900 && MTD_PARTITIONS + help + This enables the driver for the NAND Flash on evaluation board based + on w90p910. + endif # MTD_NAND diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index f3a786b3cff..4f7b1890f83 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -40,5 +40,6 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o +obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o nand-objs := nand_base.o nand_bbt.o diff --git a/drivers/mtd/nand/w90p910_nand.c b/drivers/mtd/nand/w90p910_nand.c new file mode 100644 index 00000000000..7680e731348 --- /dev/null +++ b/drivers/mtd/nand/w90p910_nand.c @@ -0,0 +1,382 @@ +/* + * Copyright (c) 2009 Nuvoton technology corporation. + * + * Wan ZongShun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define REG_FMICSR 0x00 +#define REG_SMCSR 0xa0 +#define REG_SMISR 0xac +#define REG_SMCMD 0xb0 +#define REG_SMADDR 0xb4 +#define REG_SMDATA 0xb8 + +#define RESET_FMI 0x01 +#define NAND_EN 0x08 +#define READYBUSY (0x01 << 18) + +#define SWRST 0x01 +#define PSIZE (0x01 << 3) +#define DMARWEN (0x03 << 1) +#define BUSWID (0x01 << 4) +#define ECC4EN (0x01 << 5) +#define WP (0x01 << 24) +#define NANDCS (0x01 << 25) +#define ENDADDR (0x01 << 31) + +#define read_data_reg(dev) \ + __raw_readl((dev)->reg + REG_SMDATA) + +#define write_data_reg(dev, val) \ + __raw_writel((val), (dev)->reg + REG_SMDATA) + +#define write_cmd_reg(dev, val) \ + __raw_writel((val), (dev)->reg + REG_SMCMD) + +#define write_addr_reg(dev, val) \ + __raw_writel((val), (dev)->reg + REG_SMADDR) + +struct w90p910_nand { + struct mtd_info mtd; + struct nand_chip chip; + void __iomem *reg; + struct clk *clk; + spinlock_t lock; +}; + +static const struct mtd_partition partitions[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024 + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + } +}; + +static unsigned char w90p910_nand_read_byte(struct mtd_info *mtd) +{ + unsigned char ret; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + ret = (unsigned char)read_data_reg(nand); + + return ret; +} + +static void w90p910_nand_read_buf(struct mtd_info *mtd, + unsigned char *buf, int len) +{ + int i; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + for (i = 0; i < len; i++) + buf[i] = (unsigned char)read_data_reg(nand); +} + +static void w90p910_nand_write_buf(struct mtd_info *mtd, + const unsigned char *buf, int len) +{ + int i; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + for (i = 0; i < len; i++) + write_data_reg(nand, buf[i]); +} + +static int w90p910_verify_buf(struct mtd_info *mtd, + const unsigned char *buf, int len) +{ + int i; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + for (i = 0; i < len; i++) { + if (buf[i] != (unsigned char)read_data_reg(nand)) + return -EFAULT; + } + + return 0; +} + +static int w90p910_check_rb(struct w90p910_nand *nand) +{ + unsigned int val; + spin_lock(&nand->lock); + val = __raw_readl(REG_SMISR); + val &= READYBUSY; + spin_unlock(&nand->lock); + + return val; +} + +static int w90p910_nand_devready(struct mtd_info *mtd) +{ + struct w90p910_nand *nand; + int ready; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + ready = (w90p910_check_rb(nand)) ? 1 : 0; + return ready; +} + +static void w90p910_nand_command_lp(struct mtd_info *mtd, + unsigned int command, int column, int page_addr) +{ + register struct nand_chip *chip = mtd->priv; + struct w90p910_nand *nand; + + nand = container_of(mtd, struct w90p910_nand, mtd); + + if (command == NAND_CMD_READOOB) { + column += mtd->writesize; + command = NAND_CMD_READ0; + } + + write_cmd_reg(nand, command & 0xff); + + if (column != -1 || page_addr != -1) { + + if (column != -1) { + if (chip->options & NAND_BUSWIDTH_16) + column >>= 1; + write_addr_reg(nand, column); + write_addr_reg(nand, column >> 8 | ENDADDR); + } + if (page_addr != -1) { + write_addr_reg(nand, page_addr); + + if (chip->chipsize > (128 << 20)) { + write_addr_reg(nand, page_addr >> 8); + write_addr_reg(nand, page_addr >> 16 | ENDADDR); + } else { + write_addr_reg(nand, page_addr >> 8 | ENDADDR); + } + } + } + + switch (command) { + case NAND_CMD_CACHEDPROG: + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + case NAND_CMD_SEQIN: + case NAND_CMD_RNDIN: + case NAND_CMD_STATUS: + case NAND_CMD_DEPLETE1: + return; + + case NAND_CMD_STATUS_ERROR: + case NAND_CMD_STATUS_ERROR0: + case NAND_CMD_STATUS_ERROR1: + case NAND_CMD_STATUS_ERROR2: + case NAND_CMD_STATUS_ERROR3: + udelay(chip->chip_delay); + return; + + case NAND_CMD_RESET: + if (chip->dev_ready) + break; + udelay(chip->chip_delay); + + write_cmd_reg(nand, NAND_CMD_STATUS); + write_cmd_reg(nand, command); + + while (!w90p910_check_rb(nand)) + ; + + return; + + case NAND_CMD_RNDOUT: + write_cmd_reg(nand, NAND_CMD_RNDOUTSTART); + return; + + case NAND_CMD_READ0: + + write_cmd_reg(nand, NAND_CMD_READSTART); + default: + + if (!chip->dev_ready) { + udelay(chip->chip_delay); + return; + } + } + + /* Apply this short delay always to ensure that we do wait tWB in + * any case on any machine. */ + ndelay(100); + + while (!chip->dev_ready(mtd)) + ; +} + + +static void w90p910_nand_enable(struct w90p910_nand *nand) +{ + unsigned int val; + spin_lock(&nand->lock); + __raw_writel(RESET_FMI, (nand->reg + REG_FMICSR)); + + val = __raw_readl(nand->reg + REG_FMICSR); + + if (!(val & NAND_EN)) + __raw_writel(val | NAND_EN, REG_FMICSR); + + val = __raw_readl(nand->reg + REG_SMCSR); + + val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS); + val |= WP; + + __raw_writel(val, nand->reg + REG_SMCSR); + + spin_unlock(&nand->lock); +} + +static int __devinit w90p910_nand_probe(struct platform_device *pdev) +{ + struct w90p910_nand *w90p910_nand; + struct nand_chip *chip; + int retval; + struct resource *res; + + retval = 0; + + w90p910_nand = kzalloc(sizeof(struct w90p910_nand), GFP_KERNEL); + if (!w90p910_nand) + return -ENOMEM; + chip = &(w90p910_nand->chip); + + w90p910_nand->mtd.priv = chip; + w90p910_nand->mtd.owner = THIS_MODULE; + spin_lock_init(&w90p910_nand->lock); + + w90p910_nand->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(w90p910_nand->clk)) { + retval = -ENOENT; + goto fail1; + } + clk_enable(w90p910_nand->clk); + + chip->cmdfunc = w90p910_nand_command_lp; + chip->dev_ready = w90p910_nand_devready; + chip->read_byte = w90p910_nand_read_byte; + chip->write_buf = w90p910_nand_write_buf; + chip->read_buf = w90p910_nand_read_buf; + chip->verify_buf = w90p910_verify_buf; + chip->chip_delay = 50; + chip->options = 0; + chip->ecc.mode = NAND_ECC_SOFT; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -ENXIO; + goto fail1; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + retval = -EBUSY; + goto fail1; + } + + w90p910_nand->reg = ioremap(res->start, resource_size(res)); + if (!w90p910_nand->reg) { + retval = -ENOMEM; + goto fail2; + } + + w90p910_nand_enable(w90p910_nand); + + if (nand_scan(&(w90p910_nand->mtd), 1)) { + retval = -ENXIO; + goto fail3; + } + + add_mtd_partitions(&(w90p910_nand->mtd), partitions, + ARRAY_SIZE(partitions)); + + platform_set_drvdata(pdev, w90p910_nand); + + return retval; + +fail3: iounmap(w90p910_nand->reg); +fail2: release_mem_region(res->start, resource_size(res)); +fail1: kfree(w90p910_nand); + return retval; +} + +static int __devexit w90p910_nand_remove(struct platform_device *pdev) +{ + struct w90p910_nand *w90p910_nand = platform_get_drvdata(pdev); + struct resource *res; + + iounmap(w90p910_nand->reg); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + clk_disable(w90p910_nand->clk); + clk_put(w90p910_nand->clk); + + kfree(w90p910_nand); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver w90p910_nand_driver = { + .probe = w90p910_nand_probe, + .remove = __devexit_p(w90p910_nand_remove), + .driver = { + .name = "w90p910-fmi", + .owner = THIS_MODULE, + }, +}; + +static int __init w90p910_nand_init(void) +{ + return platform_driver_register(&w90p910_nand_driver); +} + +static void __exit w90p910_nand_exit(void) +{ + platform_driver_unregister(&w90p910_nand_driver); +} + +module_init(w90p910_nand_init); +module_exit(w90p910_nand_exit); + +MODULE_AUTHOR("Wan ZongShun "); +MODULE_DESCRIPTION("w90p910 nand driver!"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:w90p910-fmi"); -- cgit v1.2.3 From 59e9c5ae17179fe561103fbe0808fac5976ca1bd Mon Sep 17 00:00:00 2001 From: vimal singh Date: Mon, 13 Jul 2009 16:26:24 +0530 Subject: mtd: omap: add support for nand prefetch-read and post-write This patch adds prefetch support to access nand flash in mpu mode. This patch also adds 8-bit nand support (omap_read/write_buf8). Prefetch can be used for both 8- and 16-bit devices. Signed-off-by: Vimal Singh Acked-by: Tony Lindgren Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 8 +++ drivers/mtd/nand/omap2.c | 161 ++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 160 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 707d7ee495d..7dab79caed4 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -80,6 +80,14 @@ config MTD_NAND_OMAP2 help Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms. +config MTD_NAND_OMAP_PREFETCH + bool "GPMC prefetch support for NAND Flash device" + depends on MTD_NAND && MTD_NAND_OMAP2 + default y + help + The NAND device can be accessed for Read/Write using GPMC PREFETCH engine + to improve the performance. + config MTD_NAND_TS7250 tristate "NAND Flash device on TS-7250 board" depends on MACH_TS72XX diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index ebd07e95b81..6736822c475 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -112,6 +112,16 @@ static const char *part_probes[] = { "cmdlinepart", NULL }; #endif +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH +static int use_prefetch = 1; + +/* "modprobe ... use_prefetch=0" etc */ +module_param(use_prefetch, bool, 0); +MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH"); +#else +const int use_prefetch; +#endif + struct omap_nand_info { struct nand_hw_control controller; struct omap_nand_platform_data *pdata; @@ -124,6 +134,7 @@ struct omap_nand_info { unsigned long phys_base; void __iomem *gpmc_cs_baseaddr; void __iomem *gpmc_baseaddr; + void __iomem *nand_pref_fifo_add; }; /** @@ -188,6 +199,38 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) __raw_writeb(cmd, info->nand.IO_ADDR_W); } +/** + * omap_read_buf8 - read data from NAND controller into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len) +{ + struct nand_chip *nand = mtd->priv; + + ioread8_rep(nand->IO_ADDR_R, buf, len); +} + +/** + * omap_write_buf8 - write buffer to NAND controller + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + u_char *p = (u_char *)buf; + + while (len--) { + iowrite8(*p++, info->nand.IO_ADDR_W); + while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr + + GPMC_STATUS) & GPMC_BUF_FULL)); + } +} + /** * omap_read_buf16 - read data from NAND controller into buffer * @mtd: MTD device structure @@ -198,7 +241,7 @@ static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len) { struct nand_chip *nand = mtd->priv; - __raw_readsw(nand->IO_ADDR_R, buf, len / 2); + ioread16_rep(nand->IO_ADDR_R, buf, len / 2); } /** @@ -217,13 +260,101 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len) len >>= 1; while (len--) { - writew(*p++, info->nand.IO_ADDR_W); + iowrite16(*p++, info->nand.IO_ADDR_W); while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr + GPMC_STATUS) & GPMC_BUF_FULL)) ; } } + +/** + * omap_read_buf_pref - read data from NAND controller into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + uint32_t pfpw_status = 0, r_count = 0; + int ret = 0; + u32 *p = (u32 *)buf; + + /* take care of subpage reads */ + for (; len % 4 != 0; ) { + *buf++ = __raw_readb(info->nand.IO_ADDR_R); + len--; + } + p = (u32 *) buf; + + /* configure and start prefetch transfer */ + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0); + if (ret) { + /* PFPW engine is busy, use cpu copy method */ + if (info->nand.options & NAND_BUSWIDTH_16) + omap_read_buf16(mtd, buf, len); + else + omap_read_buf8(mtd, buf, len); + } else { + do { + pfpw_status = gpmc_prefetch_status(); + r_count = ((pfpw_status >> 24) & 0x7F) >> 2; + ioread32_rep(info->nand_pref_fifo_add, p, r_count); + p += r_count; + len -= r_count << 2; + } while (len); + + /* disable and stop the PFPW engine */ + gpmc_prefetch_reset(); + } +} + +/** + * omap_write_buf_pref - write buffer to NAND controller + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void omap_write_buf_pref(struct mtd_info *mtd, + const u_char *buf, int len) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + uint32_t pfpw_status = 0, w_count = 0; + int i = 0, ret = 0; + u16 *p = (u16 *) buf; + + /* take care of subpage writes */ + if (len % 2 != 0) { + writeb(*buf, info->nand.IO_ADDR_R); + p = (u16 *)(buf + 1); + len--; + } + + /* configure and start prefetch transfer */ + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1); + if (ret) { + /* PFPW engine is busy, use cpu copy method */ + if (info->nand.options & NAND_BUSWIDTH_16) + omap_write_buf16(mtd, buf, len); + else + omap_write_buf8(mtd, buf, len); + } else { + pfpw_status = gpmc_prefetch_status(); + while (pfpw_status & 0x3FFF) { + w_count = ((pfpw_status >> 24) & 0x7F) >> 1; + for (i = 0; (i < w_count) && len; i++, len -= 2) + iowrite16(*p++, info->nand_pref_fifo_add); + pfpw_status = gpmc_prefetch_status(); + } + + /* disable and stop the PFPW engine */ + gpmc_prefetch_reset(); + } +} + /** * omap_verify_buf - Verify chip data against buffer * @mtd: MTD device structure @@ -658,17 +789,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) err = -ENOMEM; goto out_release_mem_region; } + info->nand.controller = &info->controller; info->nand.IO_ADDR_W = info->nand.IO_ADDR_R; info->nand.cmd_ctrl = omap_hwcontrol; - /* REVISIT: only supports 16-bit NAND flash */ - - info->nand.read_buf = omap_read_buf16; - info->nand.write_buf = omap_write_buf16; - info->nand.verify_buf = omap_verify_buf; - /* * If RDY/BSY line is connected to OMAP then use the omap ready * funcrtion and the generic nand_wait function which reads the status @@ -689,6 +815,23 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) == 0x1000) info->nand.options |= NAND_BUSWIDTH_16; + if (use_prefetch) { + /* copy the virtual address of nand base for fifo access */ + info->nand_pref_fifo_add = info->nand.IO_ADDR_R; + + info->nand.read_buf = omap_read_buf_pref; + info->nand.write_buf = omap_write_buf_pref; + } else { + if (info->nand.options & NAND_BUSWIDTH_16) { + info->nand.read_buf = omap_read_buf16; + info->nand.write_buf = omap_write_buf16; + } else { + info->nand.read_buf = omap_read_buf8; + info->nand.write_buf = omap_write_buf8; + } + } + info->nand.verify_buf = omap_verify_buf; + #ifdef CONFIG_MTD_NAND_OMAP_HWECC info->nand.ecc.bytes = 3; info->nand.ecc.size = 512; @@ -746,7 +889,7 @@ static int omap_nand_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); /* Release NAND device, its internal structures and partitions */ nand_release(&info->mtd); - iounmap(info->nand.IO_ADDR_R); + iounmap(info->nand_pref_fifo_add); kfree(&info->mtd); return 0; } -- cgit v1.2.3 From dfe32893cbe3e599a39770199b9982a6ad5daa7b Mon Sep 17 00:00:00 2001 From: vimal singh Date: Mon, 13 Jul 2009 16:29:16 +0530 Subject: mtd: omap: adding DMA mode support in nand prefetch/post-write This patch adds DMA mode support for nand prefetch/post-write engine. Signed-off-by: Vimal Singh Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 9 +++ drivers/mtd/nand/omap2.c | 186 ++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 193 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7dab79caed4..2c9a0ed4aed 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -88,6 +88,15 @@ config MTD_NAND_OMAP_PREFETCH The NAND device can be accessed for Read/Write using GPMC PREFETCH engine to improve the performance. +config MTD_NAND_OMAP_PREFETCH_DMA + depends on MTD_NAND_OMAP_PREFETCH + bool "DMA mode" + default n + help + The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode + or in DMA interrupt mode. + Say y for DMA mode or MPU mode will be used + config MTD_NAND_TS7250 tristate "NAND Flash device on TS-7250 board" depends on MACH_TS72XX diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 6736822c475..090ab87086b 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -18,8 +18,7 @@ #include #include -#include - +#include #include #include @@ -118,8 +117,19 @@ static int use_prefetch = 1; /* "modprobe ... use_prefetch=0" etc */ module_param(use_prefetch, bool, 0); MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH"); + +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA +static int use_dma = 1; + +/* "modprobe ... use_dma=0" etc */ +module_param(use_dma, bool, 0); +MODULE_PARM_DESC(use_dma, "enable/disable use of DMA"); +#else +const int use_dma; +#endif #else const int use_prefetch; +const int use_dma; #endif struct omap_nand_info { @@ -135,6 +145,8 @@ struct omap_nand_info { void __iomem *gpmc_cs_baseaddr; void __iomem *gpmc_baseaddr; void __iomem *nand_pref_fifo_add; + struct completion comp; + int dma_ch; }; /** @@ -355,6 +367,147 @@ static void omap_write_buf_pref(struct mtd_info *mtd, } } +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA +/* + * omap_nand_dma_cb: callback on the completion of dma transfer + * @lch: logical channel + * @ch_satuts: channel status + * @data: pointer to completion data structure + */ +static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) +{ + complete((struct completion *) data); +} + +/* + * omap_nand_dma_transfer: configer and start dma transfer + * @mtd: MTD device structure + * @addr: virtual address in RAM of source/destination + * @len: number of data bytes to be transferred + * @is_write: flag for read/write operation + */ +static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, + unsigned int len, int is_write) +{ + struct omap_nand_info *info = container_of(mtd, + struct omap_nand_info, mtd); + uint32_t prefetch_status = 0; + enum dma_data_direction dir = is_write ? DMA_TO_DEVICE : + DMA_FROM_DEVICE; + dma_addr_t dma_addr; + int ret; + + /* The fifo depth is 64 bytes. We have a sync at each frame and frame + * length is 64 bytes. + */ + int buf_len = len >> 6; + + if (addr >= high_memory) { + struct page *p1; + + if (((size_t)addr & PAGE_MASK) != + ((size_t)(addr + len - 1) & PAGE_MASK)) + goto out_copy; + p1 = vmalloc_to_page(addr); + if (!p1) + goto out_copy; + addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK); + } + + dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir); + if (dma_mapping_error(&info->pdev->dev, dma_addr)) { + dev_err(&info->pdev->dev, + "Couldn't DMA map a %d byte buffer\n", len); + goto out_copy; + } + + if (is_write) { + omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, + info->phys_base, 0, 0); + omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, + dma_addr, 0, 0); + omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32, + 0x10, buf_len, OMAP_DMA_SYNC_FRAME, + OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC); + } else { + omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, + info->phys_base, 0, 0); + omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, + dma_addr, 0, 0); + omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32, + 0x10, buf_len, OMAP_DMA_SYNC_FRAME, + OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC); + } + /* configure and start prefetch transfer */ + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write); + if (ret) + /* PFPW engine is busy, use cpu copy methode */ + goto out_copy; + + init_completion(&info->comp); + + omap_start_dma(info->dma_ch); + + /* setup and start DMA using dma_addr */ + wait_for_completion(&info->comp); + + while (0x3fff & (prefetch_status = gpmc_prefetch_status())) + ; + /* disable and stop the PFPW engine */ + gpmc_prefetch_reset(); + + dma_unmap_single(&info->pdev->dev, dma_addr, len, dir); + return 0; + +out_copy: + if (info->nand.options & NAND_BUSWIDTH_16) + is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len) + : omap_write_buf16(mtd, (u_char *) addr, len); + else + is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len) + : omap_write_buf8(mtd, (u_char *) addr, len); + return 0; +} +#else +static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {} +static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr, + unsigned int len, int is_write) +{ + return 0; +} +#endif + +/** + * omap_read_buf_dma_pref - read data from NAND controller into buffer + * @mtd: MTD device structure + * @buf: buffer to store date + * @len: number of bytes to read + */ +static void omap_read_buf_dma_pref(struct mtd_info *mtd, u_char *buf, int len) +{ + if (len <= mtd->oobsize) + omap_read_buf_pref(mtd, buf, len); + else + /* start transfer in DMA mode */ + omap_nand_dma_transfer(mtd, buf, len, 0x0); +} + +/** + * omap_write_buf_dma_pref - write buffer to NAND controller + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void omap_write_buf_dma_pref(struct mtd_info *mtd, + const u_char *buf, int len) +{ + if (len <= mtd->oobsize) + omap_write_buf_pref(mtd, buf, len); + else + /* start transfer in DMA mode */ + omap_nand_dma_transfer(mtd, buf, len, 0x1); +} + /** * omap_verify_buf - Verify chip data against buffer * @mtd: MTD device structure @@ -821,6 +974,23 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->nand.read_buf = omap_read_buf_pref; info->nand.write_buf = omap_write_buf_pref; + if (use_dma) { + err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND", + omap_nand_dma_cb, &info->comp, &info->dma_ch); + if (err < 0) { + info->dma_ch = -1; + printk(KERN_WARNING "DMA request failed." + " Non-dma data transfer mode\n"); + } else { + omap_set_dma_dest_burst_mode(info->dma_ch, + OMAP_DMA_DATA_BURST_16); + omap_set_dma_src_burst_mode(info->dma_ch, + OMAP_DMA_DATA_BURST_16); + + info->nand.read_buf = omap_read_buf_dma_pref; + info->nand.write_buf = omap_write_buf_dma_pref; + } + } } else { if (info->nand.options & NAND_BUSWIDTH_16) { info->nand.read_buf = omap_read_buf16; @@ -887,6 +1057,9 @@ static int omap_nand_remove(struct platform_device *pdev) struct omap_nand_info *info = mtd->priv; platform_set_drvdata(pdev, NULL); + if (use_dma) + omap_free_dma(info->dma_ch); + /* Release NAND device, its internal structures and partitions */ nand_release(&info->mtd); iounmap(info->nand_pref_fifo_add); @@ -906,6 +1079,15 @@ static struct platform_driver omap_nand_driver = { static int __init omap_nand_init(void) { printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME); + + /* This check is required if driver is being + * loaded run time as a module + */ + if ((1 == use_dma) && (0 == use_prefetch)) { + printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 " + "without use_prefetch'. Prefetch will not be" + " used in either mode (mpu or dma)\n"); + } return platform_driver_register(&omap_nand_driver); } -- cgit v1.2.3 From 9289d4ef065a6c62db6bf13d624307f61e57dbbb Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 18 Aug 2009 12:34:04 -0400 Subject: driver/Makefile: Initialize "mtd" and "spi" before "net" On TI's da850/omap-l138 EVM, MAC address is stored in SPI flash. This patch changes the initialization sequence of the drivers by moving mtd and spi ahead of net in drivers/Makefile thereby enabling da850/omap-l138 ethernet driver to read the MAC address while booting. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: David Woodhouse --- drivers/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/Makefile b/drivers/Makefile index bc4205d2fc3..2a1d41f0500 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -42,6 +42,8 @@ obj-y += macintosh/ obj-$(CONFIG_IDE) += ide/ obj-$(CONFIG_SCSI) += scsi/ obj-$(CONFIG_ATA) += ata/ +obj-$(CONFIG_MTD) += mtd/ +obj-$(CONFIG_SPI) += spi/ obj-y += net/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ @@ -50,8 +52,6 @@ obj-y += ieee1394/ obj-$(CONFIG_UIO) += uio/ obj-y += cdrom/ obj-y += auxdisplay/ -obj-$(CONFIG_MTD) += mtd/ -obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_PCCARD) += pcmcia/ obj-$(CONFIG_DIO) += dio/ obj-$(CONFIG_SBUS) += sbus/ -- cgit v1.2.3 From ebd5a74db74ee2db833d43ea35108a4be9cab42f Mon Sep 17 00:00:00 2001 From: Benjamin Krill Date: Tue, 25 Aug 2009 15:52:41 +0200 Subject: mtd: ofpart: Check availability of reg property instead of name property The previous implementation breaks the dts binding "mtd-physmap.txt". This implementation fixes the issue by checking the availability of the reg property instead of the name property. Cc: stable@kernel.org Signed-off-by: Benjamin Krill Signed-off-by: David Woodhouse --- drivers/mtd/ofpart.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 3e164f0c929..62d6a78c4ee 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -46,21 +46,12 @@ int __devinit of_mtd_parse_partitions(struct device *dev, const u32 *reg; int len; - /* check if this is a partition node */ - partname = of_get_property(pp, "name", &len); - if (strcmp(partname, "partition") != 0) { + reg = of_get_property(pp, "reg", &len); + if (!reg) { nr_parts--; continue; } - reg = of_get_property(pp, "reg", &len); - if (!reg || (len != 2 * sizeof(u32))) { - of_node_put(pp); - dev_err(dev, "Invalid 'reg' on %s\n", node->full_name); - kfree(*pparts); - *pparts = NULL; - return -EINVAL; - } (*pparts)[i].offset = reg[0]; (*pparts)[i].size = reg[1]; @@ -75,6 +66,14 @@ int __devinit of_mtd_parse_partitions(struct device *dev, i++; } + if (!i) { + of_node_put(pp); + dev_err(dev, "No valid partition found on %s\n", node->full_name); + kfree(*pparts); + *pparts = NULL; + return -EINVAL; + } + return nr_parts; } EXPORT_SYMBOL(of_mtd_parse_partitions); -- cgit v1.2.3 From 76c23c32e3b3ad48e07e07897075ab19ae1ef117 Mon Sep 17 00:00:00 2001 From: Feng Kan Date: Tue, 25 Aug 2009 11:27:20 -0700 Subject: mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver Fix ECC Correction bug where the byte offset location were double fliped causing correction routine to toggle the wrong byte location in the ECC segment. The ndfc_calculate_ecc routine change the order of getting the ECC code. /* The NDFC uses Smart Media (SMC) bytes order */ ecc_code[0] = p[2]; ecc_code[1] = p[1]; ecc_code[2] = p[3]; But in the Correction algorithm when calculating the byte offset location, the b1 is used as the upper part of the address. Which again reverse the order making the final byte offset address location incorrect. byte_addr = (addressbits[b1] << 4) + addressbits[b0]; The order is change to read it in straight and let the correction function to revert it to SMC order. Cc: stable@kernel.org Signed-off-by: Feng Kan Acked-by: Victor Gallardo Acked-by: Prodyut Hazarika Acked-by: Stefan Roese Signed-off-by: David Woodhouse --- drivers/mtd/nand/ndfc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 89bf85af642..40b5658bdbe 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -102,8 +102,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd, wmb(); ecc = in_be32(ndfc->ndfcbase + NDFC_ECC); /* The NDFC uses Smart Media (SMC) bytes order */ - ecc_code[0] = p[2]; - ecc_code[1] = p[1]; + ecc_code[0] = p[1]; + ecc_code[1] = p[2]; ecc_code[2] = p[3]; return 0; -- cgit v1.2.3 From b4c8c8cf9ad6bac5a1d7fdae751ce38b8d3028ba Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 1 Sep 2009 11:51:25 +0300 Subject: mtd: jedec: fix compilation problem with I28F640C3B definition Signed-off-by: Stefan Roese Signed-off-by: Vitaly Bordug Signed-off-by: David Woodhouse --- drivers/mtd/chips/jedec_probe.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 0f7065d190f..16bc2fa8128 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -111,6 +111,11 @@ #define I28F320B3B 0x8897 #define I28F640B3T 0x8898 #define I28F640B3B 0x8899 +#define I28F640C3B 0x88CD +#define I28F160F3T 0x88F3 +#define I28F160F3B 0x88F4 +#define I28F160C3T 0x88C2 +#define I28F160C3B 0x88C3 #define I82802AB 0x00ad #define I82802AC 0x00ac @@ -1101,6 +1106,19 @@ static const struct amd_flash_info jedec_table[] = { ERASEINFO(0x10000, 127), ERASEINFO(0x02000, 8), } + }, { + .mfr_id = MANUFACTURER_INTEL, + .dev_id = I28F640C3B, + .name = "Intel 28F640C3B", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 127), + } }, { .mfr_id = MANUFACTURER_INTEL, .dev_id = I82802AB, -- cgit v1.2.3 From 6ad08ddd9e8b85ad6c49eeb6c5d940ccdd119bde Mon Sep 17 00:00:00 2001 From: Mohanlal Jangir Date: Thu, 3 Sep 2009 22:56:17 +0900 Subject: mtd: inftl: fix fold chain block number Signed-off-by: Mohan Lal Jangir Signed-off-by: David Woodhouse --- drivers/mtd/inftlcore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) mode change 100644 => 100755 drivers/mtd/inftlcore.c (limited to 'drivers') diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c old mode 100644 new mode 100755 index d8cf29c01cc..8aca5523a33 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -550,7 +550,7 @@ hitused: * waiting to be picked up. We're going to have to fold * a chain to make room. */ - thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL); + thisEUN = INFTL_makefreeblock(inftl, block); /* * Hopefully we free something, lets try again. -- cgit v1.2.3 From 23af51ecfb04ff65bae51bd8e2270f4449abc789 Mon Sep 17 00:00:00 2001 From: Massimo Cirillo Date: Thu, 3 Sep 2009 16:34:39 +0200 Subject: mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G The M29W128G Numonyx flash devices are intolerant to any 0xFF command: in the Cfi_util.c the function cfi_qry_mode_off() (that resets the device after the autoselect mode) must have a 0xF0 command after the 0xFF command. This fix solves also the cause of the fixup_M29W128G_write_buffer() fix, that can be removed now. The following patch applies to 2.6.30 kernel. Signed-off-by: Massimo Cirillo Acked-by: Alexey Korolev Cc: stable@kernel.org Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0002.c | 11 ----------- drivers/mtd/chips/cfi_util.c | 4 ++++ 2 files changed, 4 insertions(+), 11 deletions(-) mode change 100644 => 100755 drivers/mtd/chips/cfi_util.c (limited to 'drivers') diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 61ea833e090..94bb61e1904 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -282,16 +282,6 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param) } } -static void fixup_M29W128G_write_buffer(struct mtd_info *mtd, void *param) -{ - struct map_info *map = mtd->priv; - struct cfi_private *cfi = map->fldrv_priv; - if (cfi->cfiq->BufWriteTimeoutTyp) { - pr_warning("Don't use write buffer on ST flash M29W128G\n"); - cfi->cfiq->BufWriteTimeoutTyp = 0; - } -} - static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG @@ -308,7 +298,6 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, }, { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, }, { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, }, - { CFI_MFR_ST, 0x227E, fixup_M29W128G_write_buffer, NULL, }, #if !FORCE_WORD_WRITE { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, #endif diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c old mode 100644 new mode 100755 index 34d40e25d31..c5a84fda541 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -81,6 +81,10 @@ void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map, { cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); + /* M29W128G flashes require an additional reset command + when exit qry mode */ + if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E)) + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); } EXPORT_SYMBOL_GPL(cfi_qry_mode_off); -- cgit v1.2.3 From be2f092bfc4f6a415bb4c3e2dcbf521a1f2a0fe5 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Sep 2009 01:20:43 +0900 Subject: mtd: nand: add __nand_correct_data helper function Split nand_correct_data() into two part, a pure calculation function and a wrapper for mtd interface. The tmio_nand driver can implement its ecc.correct function easily using this __nand_correct_data helper. Signed-off-by: Atsushi Nemoto Acked-by: Dmitry Eremin-Solenikov Acked-by: Vimal Singh Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_ecc.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index c0cb87d6d16..db7ae9d6a29 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -417,22 +417,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf, EXPORT_SYMBOL(nand_calculate_ecc); /** - * nand_correct_data - [NAND Interface] Detect and correct bit error(s) - * @mtd: MTD block structure + * __nand_correct_data - [NAND Interface] Detect and correct bit error(s) * @buf: raw data read from the chip * @read_ecc: ECC from the chip * @calc_ecc: the ECC calculated from raw data + * @eccsize: data bytes per ecc step (256 or 512) * - * Detect and correct a 1 bit error for 256/512 byte block + * Detect and correct a 1 bit error for eccsize byte block */ -int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, - unsigned char *read_ecc, unsigned char *calc_ecc) +int __nand_correct_data(unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc, + unsigned int eccsize) { unsigned char b0, b1, b2, bit_addr; unsigned int byte_addr; /* 256 or 512 bytes/ecc */ - const uint32_t eccsize_mult = - (((struct nand_chip *)mtd->priv)->ecc.size) >> 8; + const uint32_t eccsize_mult = eccsize >> 8; /* * b0 to b2 indicate which bit is faulty (if any) @@ -495,6 +495,23 @@ int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, printk(KERN_ERR "uncorrectable error : "); return -1; } +EXPORT_SYMBOL(__nand_correct_data); + +/** + * nand_correct_data - [NAND Interface] Detect and correct bit error(s) + * @mtd: MTD block structure + * @buf: raw data read from the chip + * @read_ecc: ECC from the chip + * @calc_ecc: the ECC calculated from raw data + * + * Detect and correct a 1 bit error for 256/512 byte block + */ +int nand_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + return __nand_correct_data(buf, read_ecc, calc_ecc, + ((struct nand_chip *)mtd->priv)->ecc.size); +} EXPORT_SYMBOL(nand_correct_data); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 0f777fb9318739baf517c4f4ef66347d8898643d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Sep 2009 01:20:44 +0900 Subject: mtd: nand: fix tmio_nand ecc correction This driver may be reading 512 bytes at a times, but still calculates 256-byte sector ECC. So the nand_correct_data() is not appropriate for this driver. Implement its ecc.correct function calling __nand_correct_data() twice. Signed-off-by: Atsushi Nemoto Acked-by: Dmitry Eremin-Solenikov Acked-by: Vimal Singh Signed-off-by: David Woodhouse --- drivers/mtd/nand/tmio_nand.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index daa6a4c3b8c..92c73344a66 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -301,6 +301,21 @@ static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, return 0; } +static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + int r0, r1; + + /* assume ecc.size = 512 and ecc.bytes = 6 */ + r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256); + if (r0 < 0) + return r0; + r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256); + if (r1 < 0) + return r1; + return r0 + r1; +} + static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; @@ -424,7 +439,7 @@ static int tmio_probe(struct platform_device *dev) nand_chip->ecc.bytes = 6; nand_chip->ecc.hwctl = tmio_nand_enable_hwecc; nand_chip->ecc.calculate = tmio_nand_calculate_ecc; - nand_chip->ecc.correct = nand_correct_data; + nand_chip->ecc.correct = tmio_nand_correct_data; if (data) nand_chip->badblock_pattern = data->badblock_pattern; -- cgit v1.2.3 From c0cbfd0e81d879a950ba6f0df3f75ea30c5ab16e Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 5 Sep 2009 01:20:45 +0900 Subject: mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible Using __nand_correct_data() helper function, this driver can read 512 byte (with 6 byte ECC) at a time. This results minor performance improvement. Signed-off-by: Atsushi Nemoto Signed-off-by: David Woodhouse --- drivers/mtd/nand/txx9ndfmc.c | 52 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 47 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 488088eff2c..73af8324d0d 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -189,18 +189,43 @@ static int txx9ndfmc_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc_code) { struct platform_device *dev = mtd_to_platdev(mtd); + struct nand_chip *chip = mtd->priv; + int eccbytes; u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR); mcr &= ~TXX9_NDFMCR_ECC_ALL; txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR); txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_READ, TXX9_NDFMCR); - ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR); - ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR); - ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR); + for (eccbytes = chip->ecc.bytes; eccbytes > 0; eccbytes -= 3) { + ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR); + ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR); + ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR); + ecc_code += 3; + } txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR); return 0; } +static int txx9ndfmc_correct_data(struct mtd_info *mtd, unsigned char *buf, + unsigned char *read_ecc, unsigned char *calc_ecc) +{ + struct nand_chip *chip = mtd->priv; + int eccsize; + int corrected = 0; + int stat; + + for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) { + stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256); + if (stat < 0) + return stat; + corrected += stat; + buf += 256; + read_ecc += 3; + calc_ecc += 3; + } + return corrected; +} + static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode) { struct platform_device *dev = mtd_to_platdev(mtd); @@ -244,6 +269,22 @@ static void txx9ndfmc_initialize(struct platform_device *dev) #define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \ DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000) +static int txx9ndfmc_nand_scan(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + int ret; + + ret = nand_scan_ident(mtd, 1); + if (!ret) { + if (mtd->writesize >= 512) { + chip->ecc.size = mtd->writesize; + chip->ecc.bytes = 3 * (mtd->writesize / 256); + } + ret = nand_scan_tail(mtd); + } + return ret; +} + static int __init txx9ndfmc_probe(struct platform_device *dev) { struct txx9ndfmc_platform_data *plat = dev->dev.platform_data; @@ -321,9 +362,10 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) chip->cmd_ctrl = txx9ndfmc_cmd_ctrl; chip->dev_ready = txx9ndfmc_dev_ready; chip->ecc.calculate = txx9ndfmc_calculate_ecc; - chip->ecc.correct = nand_correct_data; + chip->ecc.correct = txx9ndfmc_correct_data; chip->ecc.hwctl = txx9ndfmc_enable_hwecc; chip->ecc.mode = NAND_ECC_HW; + /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */ chip->ecc.size = 256; chip->ecc.bytes = 3; chip->chip_delay = 100; @@ -349,7 +391,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) if (plat->wide_mask & (1 << i)) chip->options |= NAND_BUSWIDTH_16; - if (nand_scan(mtd, 1)) { + if (txx9ndfmc_nand_scan(mtd)) { kfree(txx9_priv->mtdname); kfree(txx9_priv); continue; -- cgit v1.2.3 From 894572a363539dc2e8ddde83056bd22fadb30748 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 19 Sep 2009 16:07:34 -0700 Subject: mtd: sh_flctl: register sh_flctl using platform_driver_probe() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As with orion_nand in commit f33dabbe79fdf7a8568c65faa1db7794c87ac4d3 ("register orion_nand using platform_driver_probe()"), avoid .init.text problems by using platform_device_probe(). This isn't going to be hotplugged anyway. Reported-by: Uwe Kleine-König Signed-off-by: David Woodhouse --- drivers/mtd/nand/sh_flctl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index c5df28596a4..02bef21f2e4 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -857,7 +857,6 @@ static int __exit flctl_remove(struct platform_device *pdev) } static struct platform_driver flctl_driver = { - .probe = flctl_probe, .remove = flctl_remove, .driver = { .name = "sh_flctl", @@ -867,7 +866,7 @@ static struct platform_driver flctl_driver = { static int __init flctl_nand_init(void) { - return platform_driver_register(&flctl_driver); + return platform_driver_probe(&flctl_driver, flctl_probe); } static void __exit flctl_nand_cleanup(void) -- cgit v1.2.3 From 304e6d5fe294b80e6d3107f99ec241816390ebcc Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Fri, 18 Sep 2009 19:36:42 -0700 Subject: m25p80: Add Spansion S25FL129P serial flashes Tested 64KiB block size only. Signed-off-by: Kevin Cernekee Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 9b78869cd8a..00355862eba 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -633,8 +633,10 @@ static struct flash_info __devinitdata m25p_data [] = { { "s25sl016a", 0x010214, 0, 64 * 1024, 32, }, { "s25sl032a", 0x010215, 0, 64 * 1024, 64, }, { "s25sl064a", 0x010216, 0, 64 * 1024, 128, }, - { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, }, + { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, }, { "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, }, + { "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, }, + { "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, }, -- cgit v1.2.3 From 63234717d170d39ee9cc873f29930b0fb142a114 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Wed, 29 Jul 2009 18:51:56 +0200 Subject: mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board) Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Acked-by: Russell King Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 6 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/nomadik_nand.c | 250 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 257 insertions(+) create mode 100644 drivers/mtd/nand/nomadik_nand.c (limited to 'drivers') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 2c9a0ed4aed..2fda0b61524 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -443,6 +443,12 @@ config MTD_NAND_MXC This enables the driver for the NAND flash controller on the MXC processors. +config MTD_NAND_NOMADIK + tristate "ST Nomadik 8815 NAND support" + depends on ARCH_NOMADIK + help + Driver for the NAND flash controller on the Nomadik, with ECC. + config MTD_NAND_SH_FLCTL tristate "Support for NAND on Renesas SuperH FLCTL" depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723 diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 4f7b1890f83..6950d3dabf1 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -41,5 +41,6 @@ obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o +obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o nand-objs := nand_base.o nand_bbt.o diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c new file mode 100644 index 00000000000..7c302d55910 --- /dev/null +++ b/drivers/mtd/nand/nomadik_nand.c @@ -0,0 +1,250 @@ +/* + * drivers/mtd/nand/nomadik_nand.c + * + * Overview: + * Driver for on-board NAND flash on Nomadik Platforms + * + * Copyright © 2007 STMicroelectronics Pvt. Ltd. + * Author: Sachin Verma + * + * Copyright © 2009 Alessandro Rubini + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +struct nomadik_nand_host { + struct mtd_info mtd; + struct nand_chip nand; + void __iomem *data_va; + void __iomem *cmd_va; + void __iomem *addr_va; + struct nand_bbt_descr *bbt_desc; +}; + +static struct nand_ecclayout nomadik_ecc_layout = { + .eccbytes = 3 * 4, + .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */ + 0x02, 0x03, 0x04, + 0x12, 0x13, 0x14, + 0x22, 0x23, 0x24, + 0x32, 0x33, 0x34}, + /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */ + .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} }, +}; + +static void nomadik_ecc_control(struct mtd_info *mtd, int mode) +{ + /* No need to enable hw ecc, it's on by default */ +} + +static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *nand = mtd->priv; + struct nomadik_nand_host *host = nand->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, host->cmd_va); + else + writeb(cmd, host->addr_va); +} + +static int nomadik_nand_probe(struct platform_device *pdev) +{ + struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data; + struct nomadik_nand_host *host; + struct mtd_info *mtd; + struct nand_chip *nand; + struct resource *res; + int ret = 0; + + /* Allocate memory for the device structure (and zero it) */ + host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL); + if (!host) { + dev_err(&pdev->dev, "Failed to allocate device structure.\n"); + return -ENOMEM; + } + + /* Call the client's init function, if any */ + if (pdata->init) + ret = pdata->init(); + if (ret < 0) { + dev_err(&pdev->dev, "Init function failed\n"); + goto err; + } + + /* ioremap three regions */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr"); + if (!res) { + ret = -EIO; + goto err_unmap; + } + host->addr_va = ioremap(res->start, res->end - res->start + 1); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data"); + if (!res) { + ret = -EIO; + goto err_unmap; + } + host->data_va = ioremap(res->start, res->end - res->start + 1); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd"); + if (!res) { + ret = -EIO; + goto err_unmap; + } + host->cmd_va = ioremap(res->start, res->end - res->start + 1); + + if (!host->addr_va || !host->data_va || !host->cmd_va) { + ret = -ENOMEM; + goto err_unmap; + } + + /* Link all private pointers */ + mtd = &host->mtd; + nand = &host->nand; + mtd->priv = nand; + nand->priv = host; + + host->mtd.owner = THIS_MODULE; + nand->IO_ADDR_R = host->data_va; + nand->IO_ADDR_W = host->data_va; + nand->cmd_ctrl = nomadik_cmd_ctrl; + + /* + * This stanza declares ECC_HW but uses soft routines. It's because + * HW claims to make the calculation but not the correction. However, + * I haven't managed to get the desired data out of it until now. + */ + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.layout = &nomadik_ecc_layout; + nand->ecc.hwctl = nomadik_ecc_control; + nand->ecc.size = 512; + nand->ecc.bytes = 3; + + nand->options = pdata->options; + + /* + * Scan to find existance of the device + */ + if (nand_scan(&host->mtd, 1)) { + ret = -ENXIO; + goto err_unmap; + } + +#ifdef CONFIG_MTD_PARTITIONS + add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts); +#else + pr_info("Registering %s as whole device\n", mtd->name); + add_mtd_device(mtd); +#endif + + platform_set_drvdata(pdev, host); + return 0; + + err_unmap: + if (host->cmd_va) + iounmap(host->cmd_va); + if (host->data_va) + iounmap(host->data_va); + if (host->addr_va) + iounmap(host->addr_va); + err: + kfree(host); + return ret; +} + +/* + * Clean up routine + */ +static int nomadik_nand_remove(struct platform_device *pdev) +{ + struct nomadik_nand_host *host = platform_get_drvdata(pdev); + struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data; + + if (pdata->exit) + pdata->exit(); + + if (host) { + iounmap(host->cmd_va); + iounmap(host->data_va); + iounmap(host->addr_va); + kfree(host); + } + return 0; +} + +static int nomadik_nand_suspend(struct device *dev) +{ + struct nomadik_nand_host *host = dev_get_drvdata(dev); + int ret = 0; + if (host) + ret = host->mtd.suspend(&host->mtd); + return ret; +} + +static int nomadik_nand_resume(struct device *dev) +{ + struct nomadik_nand_host *host = dev_get_drvdata(dev); + if (host) + host->mtd.resume(&host->mtd); + return 0; +} + +static struct dev_pm_ops nomadik_nand_pm_ops = { + .suspend = nomadik_nand_suspend, + .resume = nomadik_nand_resume, +}; + +static struct platform_driver nomadik_nand_driver = { + .probe = nomadik_nand_probe, + .remove = nomadik_nand_remove, + .driver = { + .owner = THIS_MODULE, + .name = "nomadik_nand", + .pm = &nomadik_nand_pm_ops, + }, +}; + +static int __init nand_nomadik_init(void) +{ + pr_info("Nomadik NAND driver\n"); + return platform_driver_register(&nomadik_nand_driver); +} + +static void __exit nand_nomadik_exit(void) +{ + platform_driver_unregister(&nomadik_nand_driver); +} + +module_init(nand_nomadik_init); +module_exit(nand_nomadik_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)"); +MODULE_DESCRIPTION("NAND driver for Nomadik Platform"); -- cgit v1.2.3 From e1070211f7327a1f197d535aa886f721a241c32f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 23 Sep 2009 00:49:39 -0400 Subject: mtd: jedec_probe: add PSD4256G6V id Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/chips/jedec_probe.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 16bc2fa8128..736a3be265f 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -155,6 +155,7 @@ #define M50LPW080 0x002F #define M50FLW080A 0x0080 #define M50FLW080B 0x0081 +#define PSD4256G6V 0x00e9 /* SST */ #define SST29EE020 0x0010 @@ -206,6 +207,7 @@ enum uaddr { MTD_UADDR_0x0555_0x02AA, MTD_UADDR_0x0555_0x0AAA, MTD_UADDR_0x5555_0x2AAA, + MTD_UADDR_0x0AAA_0x0554, MTD_UADDR_0x0AAA_0x0555, MTD_UADDR_0xAAAA_0x5555, MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */ @@ -250,6 +252,11 @@ static const struct unlock_addr unlock_addrs[] = { .addr2 = 0x2aaa }, + [MTD_UADDR_0x0AAA_0x0554] = { + .addr1 = 0x0AAA, + .addr2 = 0x0554 + }, + [MTD_UADDR_0x0AAA_0x0555] = { .addr1 = 0x0AAA, .addr2 = 0x0555 @@ -1743,6 +1750,18 @@ static const struct amd_flash_info jedec_table[] = { ERASEINFO(0x10000,13), ERASEINFO(0x1000,16), } + }, { + .mfr_id = 0xff00 | MANUFACTURER_ST, + .dev_id = 0xff00 | PSD4256G6V, + .name = "ST PSD4256G6V", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0x0AAA_0x0554, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + } }, { .mfr_id = MANUFACTURER_TOSHIBA, .dev_id = TC58FVT160, -- cgit v1.2.3