From d904ffd6e0c3ab7631b07c21c9f9234a2e72d1f3 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 27 Feb 2006 12:08:00 +0100 Subject: [PATCH] Fix Specialix SX corruption With the latest kernels, I experienced some strange corruption, some '*****' being randomly inserted in the character flow, like this: ashes:~# ashes:~# a*******shes:~# ashes:~# ashes:~# Further investigation shows that the problem was introduced during Alan's "TTY layer buffering revamp" patch, the amount of data to be copied being reduced after buffer allocation. Moving the count fixup around solves the problem. Signed-off-by: Marc Zyngier Approved-by: Rogier Wolff Signed-off-by: Linus Torvalds --- drivers/char/sx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/sx.c b/drivers/char/sx.c index 588e75ec163..a6b4f02bdce 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1095,17 +1095,17 @@ static inline void sx_receive_chars (struct sx_port *port) sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c); + /* Don't copy past the end of the hardware receive buffer */ + if (rx_op + c > 0x100) c = 0x100 - rx_op; + + sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c); + /* Don't copy more bytes than there is room for in the buffer */ c = tty_prepare_flip_string(tty, &rp, c); sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c); - /* Don't copy past the end of the hardware receive buffer */ - if (rx_op + c > 0x100) c = 0x100 - rx_op; - - sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c); - /* If for one reason or another, we can't copy more data, we're done! */ if (c == 0) break; -- cgit v1.2.3 From 051d3cbd96909b2fe6b5038e7bbe77f41356db05 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 27 Feb 2006 12:51:27 -0800 Subject: [TG3]: Fix Sun tg3 variant detection. Some Sun parts don't have PCI_VENDOR_ID_SUN in the subsystem vendor ID. So add another fallback test, which is the name of the OBP firmware device tree node. If it's a Sun part we'll get "network", else it will be named "ethernet". Signed-off-by: David S. Miller --- drivers/net/tg3.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index e7dc653d5bd..e8e92c853e8 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -9408,6 +9408,15 @@ static int __devinit tg3_is_sun_570X(struct tg3 *tp) return 0; if (venid == PCI_VENDOR_ID_SUN) return 1; + + /* TG3 chips onboard the SunBlade-2500 don't have the + * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they + * are distinguishable from non-Sun variants by being + * named "network" by the firmware. Non-Sun cards will + * show up as being named "ethernet". + */ + if (!strcmp(pcp->prom_name, "network")) + return 1; } return 0; } -- cgit v1.2.3 From b3c3e7d7d9795df16012d5c60e5f789e7fade311 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Mon, 27 Feb 2006 23:11:08 +0100 Subject: via-velocity: fix memory corruption when changing the mtu velocity_rx_refill() only replenishes the descriptor entries which belong to the CPU. It works great in the Rx path but the driver must ensure that all the descriptors are freed before velocity_rx_refill() is used in velocity_change_mtu(). The patch resets the Rx descriptors in velocity_free_rd_ring(). Signed-off-by: Francois Romieu --- drivers/net/via-velocity.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index c2d5907dc8e..ed1f837c8fd 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1106,6 +1106,9 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) for (i = 0; i < vptr->options.numrx; i++) { struct velocity_rd_info *rd_info = &(vptr->rd_info[i]); + struct rx_desc *rd = vptr->rd_ring + i; + + memset(rd, 0, sizeof(*rd)); if (!rd_info->skb) continue; -- cgit v1.2.3 From 576cfa934e357c44d6259f90c7d065de328a3691 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Mon, 27 Feb 2006 23:15:06 +0100 Subject: 8139cp: fix broken suspend/resume - check that the device is up before it is enabled again; - the descriptor ring indexes must be set to zero before cp_init_hw() is issued. Add a nice comment to remember that skb allocation failure is still not handled. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5681 Signed-off-by: Francois Romieu --- drivers/net/8139cp.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index f822cd3025f..dd410496aad 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1118,13 +1118,18 @@ err_out: return -ENOMEM; } +static void cp_init_rings_index (struct cp_private *cp) +{ + cp->rx_tail = 0; + cp->tx_head = cp->tx_tail = 0; +} + static int cp_init_rings (struct cp_private *cp) { memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd); - cp->rx_tail = 0; - cp->tx_head = cp->tx_tail = 0; + cp_init_rings_index(cp); return cp_refill_rx (cp); } @@ -1886,30 +1891,30 @@ static int cp_suspend (struct pci_dev *pdev, pm_message_t state) spin_unlock_irqrestore (&cp->lock, flags); - if (cp->pdev && cp->wol_enabled) { - pci_save_state (cp->pdev); - cp_set_d3_state (cp); - } + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } static int cp_resume (struct pci_dev *pdev) { - struct net_device *dev; - struct cp_private *cp; + struct net_device *dev = pci_get_drvdata (pdev); + struct cp_private *cp = netdev_priv(dev); unsigned long flags; - dev = pci_get_drvdata (pdev); - cp = netdev_priv(dev); + if (!netif_running(dev)) + return 0; netif_device_attach (dev); - - if (cp->pdev && cp->wol_enabled) { - pci_set_power_state (cp->pdev, PCI_D0); - pci_restore_state (cp->pdev); - } - + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + + /* FIXME: sh*t may happen if the Rx ring buffer is depleted */ + cp_init_rings_index (cp); cp_init_hw (cp); netif_start_queue (dev); -- cgit v1.2.3 From 50e300dead8dadf32e930ebd80d9810d631aa1a0 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Fri, 17 Feb 2006 10:25:39 -0500 Subject: [IA64] show "SN Devices" menu only if CONFIG_SGI_SN Adrian> On architectures like i386, the "Multimedia Capabilities Port Adrian> drivers" menu is visible, but it can't be visited since it Adrian> contains nothing usable for CONFIG_SGI_SN=n. Jes> Thats only a third of the patch, if you want to do that, you should Jes> remove the redundant SGI_SN checks below. Signed-off-by: Tony Luck --- drivers/sn/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/sn/Kconfig b/drivers/sn/Kconfig index d95265b187a..a3473162587 100644 --- a/drivers/sn/Kconfig +++ b/drivers/sn/Kconfig @@ -3,10 +3,11 @@ # menu "SN Devices" + depends on SGI_SN config SGI_IOC4 tristate "SGI IOC4 Base IO support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER + depends on MMTIMER default m ---help--- This option enables basic support for the SGI IOC4-based Base IO @@ -19,7 +20,6 @@ config SGI_IOC4 config SGI_IOC3 tristate "SGI IOC3 Base IO support" - depends on (IA64_GENERIC || IA64_SGI_SN2) default m ---help--- This option enables basic support for the SGI IOC3-based Base IO -- cgit v1.2.3 From eca7be5e1899626db01ae42b0123458d6fb34930 Mon Sep 17 00:00:00 2001 From: Brian King Date: Tue, 14 Feb 2006 12:42:24 -0600 Subject: [SCSI] sg: Remove aha1542 hack Remove a hack in the sg driver that alters the total buffer length for SG_IO commands to ensure buffers are not odd byte lengths. This breaks on the ipr driver since it requires the request_bufflen to equal the length specified in the cdb. The block layer SG_IO code does not appear to have this hack. Signed-off-by: Douglas Gilbert Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 2a547538d44..5a0a19322d0 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2162,7 +2162,7 @@ sg_link_reserve(Sg_fd * sfp, Sg_request * srp, int size) srp->res_used = 1; SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size)); - rem = size = (size + 1) & (~1); /* round to even for aha1542 */ + rem = size; for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) { num = sg->length; -- cgit v1.2.3 From 8b097a67264ba3e10620b268979de3be6fe5e3cd Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Tue, 14 Feb 2006 14:22:14 -0800 Subject: [SCSI] fc_transport: stop creating duplicate rport entries. Current fc_transport consumers initially register rports with an UNKNOWN role-state and follow-up with a call to fc_remote_port_rolechg(). Modify code in fc_remote_port_add() to scan the fc_host_rport_bindings() array for consistent bindings regardless of role-type. Original code would only scan bindings array for targets, causing duplicate fc_remote_ports/rport-X:Y-Z entries to be created for the yet-to-be-role-changed rports. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index f2c9acf11bd..929032e370d 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -1498,8 +1498,7 @@ fc_remote_port_add(struct Scsi_Host *shost, int channel, } /* Search the bindings array */ - if (likely((ids->roles & FC_RPORT_ROLE_FCP_TARGET) && - (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE))) { + if (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE) { /* search for a matching consistent binding */ -- cgit v1.2.3 From 938050916f57f08e20595b1fa1c1e57c2fbf7243 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Feb 2006 12:11:29 +0100 Subject: [SCSI] scsi: handle ->slave_configure return value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When ­>slave_configure fails the scsi midlayer should handle it. Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 5acb83ca5ae..f9ecc3dea7d 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -752,8 +752,20 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) transport_configure_device(&sdev->sdev_gendev); - if (sdev->host->hostt->slave_configure) - sdev->host->hostt->slave_configure(sdev); + if (sdev->host->hostt->slave_configure) { + int ret = sdev->host->hostt->slave_configure(sdev); + if (ret) { + /* + * if LLDD reports slave not present, don't clutter + * console with alloc failure messages + */ + if (ret != -ENXIO) { + sdev_printk(KERN_ERR, sdev, + "failed to configure device\n"); + } + return SCSI_SCAN_NO_RESPONSE; + } + } /* * Ok, the device is now all set up, we can -- cgit v1.2.3 From c3c013a2c218cdede2d2e73df01ed4f813538941 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 27 Feb 2006 22:31:19 -0500 Subject: [libata] Disable FUA Until problems are sorted. --- drivers/scsi/libata-core.c | 4 ++++ drivers/scsi/libata-scsi.c | 2 ++ drivers/scsi/libata.h | 1 + 3 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 5f1d7580218..4f91b0dc572 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -82,6 +82,10 @@ int atapi_enabled = 0; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); +int libata_fua = 0; +module_param_named(fua, libata_fua, int, 0444); +MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 07b1e7cc61d..59503c9ccac 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1708,6 +1708,8 @@ static int ata_dev_supports_fua(u16 *id) { unsigned char model[41], fw[9]; + if (!libata_fua) + return 0; if (!ata_id_has_fua(id)) return 0; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index e03ce48b7b4..fddaf479a54 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -41,6 +41,7 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; +extern int libata_fua; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc); -- cgit v1.2.3 From 147aab6aa22ce7775be944f8fb9932aa000dda61 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 17 Feb 2006 12:13:48 +0100 Subject: [SCSI] megaraid_sas: fix physical disk handling This patch hides the devices completely from the midlayer instead. It requires the patch to handle the slave_configure failure I posted earlier. Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 7de267e1445..4f39dd01936 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -793,6 +793,20 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) return 0; } +static int megasas_slave_configure(struct scsi_device *sdev) +{ + /* + * Don't export physical disk devices to the disk driver. + * + * FIXME: Currently we don't export them to the midlayer at all. + * That will be fixed once LSI engineers have audited the + * firmware for possible issues. + */ + if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK) + return -ENXIO; + return 0; +} + /** * megasas_wait_for_outstanding - Wait for all outstanding cmds * @instance: Adapter soft state @@ -943,6 +957,7 @@ static struct scsi_host_template megasas_template = { .module = THIS_MODULE, .name = "LSI Logic SAS based MegaRAID driver", .proc_name = "megaraid_sas", + .slave_configure = megasas_slave_configure, .queuecommand = megasas_queue_command, .eh_device_reset_handler = megasas_reset_device, .eh_bus_reset_handler = megasas_reset_bus_host, @@ -1071,20 +1086,6 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, break; } - /* - * Don't export physical disk devices to mid-layer. - */ - if (!MEGASAS_IS_LOGICAL(cmd->scmd) && - (hdr->cmd_status == MFI_STAT_OK) && - (cmd->scmd->cmnd[0] == INQUIRY)) { - - if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) == - TYPE_DISK) { - cmd->scmd->result = DID_BAD_TARGET << 16; - exception = 1; - } - } - case MFI_CMD_LD_READ: case MFI_CMD_LD_WRITE: -- cgit v1.2.3 From 8884efab1516613215816d48132dd724508970bf Mon Sep 17 00:00:00 2001 From: Brian King Date: Fri, 24 Feb 2006 17:10:04 -0600 Subject: [SCSI] scsi: scsi command retries off by one fix Fix up an off by one error in calculating retries for scsi commands. This bug was discovered when an SG_IO request was sent to scsi core with retries = 0, causing the overall timeout check to go off in scsi_softirq_done. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 4 ++-- drivers/scsi/scsi_lib.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 5cc97b72166..ff82ccfbb10 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1308,7 +1308,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * the request was not marked fast fail. Note that above, * even if the request is marked fast fail, we still requeue * for queue congestion conditions (QUEUE_FULL or BUSY) */ - if ((++scmd->retries) < scmd->allowed + if ((++scmd->retries) <= scmd->allowed && !blk_noretry_request(scmd->request)) { return NEEDS_RETRY; } else { @@ -1433,7 +1433,7 @@ static void scsi_eh_flush_done_q(struct list_head *done_q) list_del_init(&scmd->eh_entry); if (scsi_device_online(scmd->device) && !blk_noretry_request(scmd->request) && - (++scmd->retries < scmd->allowed)) { + (++scmd->retries <= scmd->allowed)) { SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush" " retry cmd: %p\n", current->comm, diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 4362dcde74a..701a328f7be 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1498,7 +1498,7 @@ static void scsi_kill_request(struct request *req, request_queue_t *q) static void scsi_softirq_done(struct request *rq) { struct scsi_cmnd *cmd = rq->completion_data; - unsigned long wait_for = cmd->allowed * cmd->timeout_per_command; + unsigned long wait_for = (cmd->allowed + 1) * cmd->timeout_per_command; int disposition; INIT_LIST_HEAD(&cmd->eh_entry); -- cgit v1.2.3 From 123fc7fd6f609a000061f586a794c89d1122ede1 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 9 Feb 2006 11:16:38 -0500 Subject: [SCSI] Delete duplicate driver template. Stuborn as compilers are they don't like duplicate definitions. Signed-off-by: Ralf Baechle Signed-off-by: James Bottomley --- drivers/scsi/jazz_esp.c | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c index 23728d1c980..fcd304e11c2 100644 --- a/drivers/scsi/jazz_esp.c +++ b/drivers/scsi/jazz_esp.c @@ -65,27 +65,6 @@ static int jazz_esp_release(struct Scsi_Host *shost) return 0; } -static struct scsi_host_template driver_template = { - .proc_name = "jazz_esp", - .proc_info = &esp_proc_info, - .name = "ESP 100/100a/200", - .detect = jazz_esp_detect, - .slave_alloc = esp_slave_alloc, - .slave_destroy = esp_slave_destroy, - .release = jazz_esp_release, - .info = esp_info, - .queuecommand = esp_queue, - .eh_abort_handler = esp_abort, - .eh_bus_reset_handler = esp_reset, - .can_queue = 7, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; - -#include "scsi_module.c" - /***************************************************************** Detection */ static int jazz_esp_detect(struct scsi_host_template *tpnt) { -- cgit v1.2.3 From 23ff51e9fe24f98c1053ac1cdded434012eee342 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 28 Feb 2006 06:28:15 -0700 Subject: [SCSI] Fix uninitialised width and speed in sym2 sym2 boards without NVRAM currently negotiate narrow due to this missed initialisation Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_hipd.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index f4854c33f48..2627000ca65 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -919,6 +919,8 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED); tp->usrtags = SYM_SETUP_MAX_TAG; + tp->usr_width = np->maxwide; + tp->usr_period = 9; sym_nvram_setup_target(tp, i, nvram); -- cgit v1.2.3 From e2482fa16e9eef88344a4dca1a390d29432d4add Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=FCrgen=20E=2E=20Fischer?= Date: Sun, 19 Feb 2006 00:31:51 +0100 Subject: [SCSI] aha152x: fix variable use before initialisation and other bugs - change interface of the reset functions from Scsi_Cmnd to Scsi_Host. - add functions with the original interface and rename the new functions to reflect the new interface. - call these from the pcmcia driver, thereby avoiding the need to construct a (broken) Scsi_Cmnd from a Scsi_Host. - just run the bh if the interrupt is from the controller and if so ensure that it's only called once per interrupt. Signed-off-by: Juergen E. Fischer Signed-off-by: James Bottomley --- drivers/scsi/aha152x.c | 85 +++++++++++++++++++++++--------------- drivers/scsi/aha152x.h | 2 +- drivers/scsi/pcmcia/aha152x_stub.c | 4 +- 3 files changed, 54 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index cb2ee25f213..531a1f9ceb5 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -1260,16 +1260,15 @@ static void free_hard_reset_SCs(struct Scsi_Host *shpnt, Scsi_Cmnd **SCs) * Reset the bus * */ -static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) +static int aha152x_bus_reset_host(struct Scsi_Host *shpnt) { - struct Scsi_Host *shpnt = SCpnt->device->host; unsigned long flags; DO_LOCK(flags); #if defined(AHA152X_DEBUG) if(HOSTDATA(shpnt)->debug & debug_eh) { - printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt); + printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no); show_queues(shpnt); } #endif @@ -1277,14 +1276,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) free_hard_reset_SCs(shpnt, &ISSUE_SC); free_hard_reset_SCs(shpnt, &DISCONNECTED_SC); - DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt)); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no); SETPORT(SCSISEQ, SCSIRSTO); mdelay(256); SETPORT(SCSISEQ, 0); mdelay(DELAY); - DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt)); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no); setup_expected_interrupts(shpnt); if(HOSTDATA(shpnt)->commands==0) @@ -1295,6 +1294,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) return SUCCESS; } +/* + * Reset the bus + * + */ +static int aha152x_bus_reset(Scsi_Cmnd *SCpnt) +{ + return aha152x_bus_reset_host(SCpnt->device->host); +} /* * Restore default values to the AIC-6260 registers and reset the fifos @@ -1337,22 +1344,27 @@ static void reset_ports(struct Scsi_Host *shpnt) * Reset the host (bus and controller) * */ -int aha152x_host_reset(Scsi_Cmnd * SCpnt) +int aha152x_host_reset_host(struct Scsi_Host *shpnt) { -#if defined(AHA152X_DEBUG) - struct Scsi_Host *shpnt = SCpnt->device->host; -#endif - - DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no); - aha152x_bus_reset(SCpnt); + aha152x_bus_reset_host(shpnt); - DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt)); - reset_ports(SCpnt->device->host); + DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no); + reset_ports(shpnt); return SUCCESS; } +/* + * Reset the host (bus and controller) + * + */ +static int aha152x_host_reset(Scsi_Cmnd *SCpnt) +{ + return aha152x_host_reset_host(SCpnt->device->host); +} + /* * Return the "logical geometry" * @@ -1431,22 +1443,18 @@ static void run(void) { int i; for (i = 0; iservice) { - HOSTDATA(shpnt)->service=0; - is_complete(shpnt); - } + is_complete(aha152x_host[i]); } } /* - * Interrupts handler + * Interrupt handler * */ - static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs) { struct Scsi_Host *shpnt = lookup_irq(irqno); + unsigned long flags; unsigned char rev, dmacntrl0; if (!shpnt) { @@ -1472,23 +1480,23 @@ static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs) if ((rev == 0xFF) && (dmacntrl0 == 0xFF)) return IRQ_NONE; + if( TESTLO(DMASTAT, INTSTAT) ) + return IRQ_NONE; + /* no more interrupts from the controller, while we're busy. INTEN is restored by the BH handler */ CLRBITS(DMACNTRL0, INTEN); -#if 0 - /* check if there is already something to be - serviced; should not happen */ - if(HOSTDATA(shpnt)->service) { - printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service); - show_queues(shpnt); + DO_LOCK(flags); + if( HOSTDATA(shpnt)->service==0 ) { + HOSTDATA(shpnt)->service=1; + + /* Poke the BH handler */ + INIT_WORK(&aha152x_tq, (void *) run, NULL); + schedule_work(&aha152x_tq); } -#endif - - /* Poke the BH handler */ - HOSTDATA(shpnt)->service++; - INIT_WORK(&aha152x_tq, (void *) run, NULL); - schedule_work(&aha152x_tq); + DO_UNLOCK(flags); + return IRQ_HANDLED; } @@ -2527,7 +2535,18 @@ static void is_complete(struct Scsi_Host *shpnt) unsigned long flags; int pending; + if(!shpnt) + return; + DO_LOCK(flags); + + if( HOSTDATA(shpnt)->service==0 ) { + DO_UNLOCK(flags); + return; + } + + HOSTDATA(shpnt)->service = 0; + if(HOSTDATA(shpnt)->in_intr) { DO_UNLOCK(flags); /* aha152x_error never returns.. */ diff --git a/drivers/scsi/aha152x.h b/drivers/scsi/aha152x.h index d277613af29..d2add24d02a 100644 --- a/drivers/scsi/aha152x.h +++ b/drivers/scsi/aha152x.h @@ -332,6 +332,6 @@ struct aha152x_setup { struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *); void aha152x_release(struct Scsi_Host *); -int aha152x_host_reset(Scsi_Cmnd *); +int aha152x_host_reset_host(struct Scsi_Host *); #endif /* _AHA152X_H */ diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 0c9edb7051f..5609847e254 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -275,10 +275,8 @@ static int aha152x_resume(struct pcmcia_device *dev) link->state &= ~DEV_SUSPEND; if (link->state & DEV_CONFIG) { - Scsi_Cmnd tmp; pcmcia_request_configuration(link->handle, &link->conf); - tmp.device->host = info->host; - aha152x_host_reset(&tmp); + aha152x_host_reset_host(info->host); } return 0; -- cgit v1.2.3 From 436002e3293472e4a7e47e5025999fc312794c4a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 28 Feb 2006 11:55:36 -0800 Subject: [SUNSU]: Fix locking error in sunsu_stop_rx(). The caller takes the UART port lock, so we shouldn't try to take it again. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 30870456694..4e453fa966a 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -299,13 +299,10 @@ static void sunsu_start_tx(struct uart_port *port) static void sunsu_stop_rx(struct uart_port *port) { struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - spin_lock_irqsave(&up->port.lock, flags); up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); - spin_unlock_irqrestore(&up->port.lock, flags); } static void sunsu_enable_ms(struct uart_port *port) -- cgit v1.2.3 From 8c450802a3abf0e8a45238fcb7d22ed9d6f191ce Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 24 Feb 2006 16:55:52 -0800 Subject: [PATCH] USB: fix EHCI BIOS handshake Fix http://bugzilla.kernel.org/show_bug.cgi?id=6128 Finish morphing the "early handoff" version of the EHCI BIOS handshake over to match the previous implementation inside the EHCI driver (except that now we forcibly disable the SMI). The version that had been with the PCI code was surprisingly full of bugs. Signed-off-by: David Brownell Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 118288d9442..9e81c26313f 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -260,12 +260,13 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) offset + EHCI_USBLEGCTLSTS, val | EHCI_USBLEGCTLSTS_SOOE); #endif - } - /* always say Linux will own the hardware - * by setting EHCI_USBLEGSUP_OS. - */ - pci_write_config_byte(pdev, offset + 3, 1); + /* some systems get upset if this semaphore is + * set for any other reason than forcing a BIOS + * handoff.. + */ + pci_write_config_byte(pdev, offset + 3, 1); + } /* if boot firmware now owns EHCI, spin till * it hands it over. -- cgit v1.2.3 From e65335ef187c9cbc50bbc56be0fe966b593beb49 Mon Sep 17 00:00:00 2001 From: Andrew Fuller Date: Sat, 25 Feb 2006 09:52:27 -0500 Subject: [PATCH] USB: Wisegroup MP-8866 Dual USB Joypad This patch is for the Dual USB Joypad [0925:8866] from Wisegroup. The HID_QUIRK_NOGET is necessary for it to respond to input, and the HID_QUIRK_MULTI_INPUT is necessary to have two js# nodes appear. Signed-off-by: Andrew Fuller Cc: "Dmitry Torokhov" Signed-off-by: Greg Kroah-Hartman --- drivers/usb/input/hid-core.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 772478086bd..07a012f8877 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1407,6 +1407,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_WISEGROUP 0x0925 #define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101 #define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104 +#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866 #define USB_VENDOR_ID_CODEMERCS 0x07c0 #define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500 @@ -1577,6 +1578,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET}, { USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET }, { USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE }, { USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 }, -- cgit v1.2.3 From 754501b324fc3c42522a46d3ace205e7a6a50e77 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 23 Feb 2006 10:19:25 -0500 Subject: [PATCH] USB: unusual_devs entry for Lyra RCA RD1080 This patch (as656) adds an unusual_devs.h entry for the Lyra RCA RD1080 MP3 player. Its card-reader firmware has the common report-one-too-many-sectors bug. This fixes Novell bug #152175. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index e71c5ca1a07..31ca92056c2 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -753,6 +753,13 @@ UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, "Flashgate", US_SC_SCSI, US_PR_BULK, NULL, 0 ), +/* Reported by David Hamilton */ +UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, + "Thomson Multimedia Inc.", + "RCA RD1080 MP3 Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200, "Sandisk", "ImageMate SDDR-05a", -- cgit v1.2.3 From d5ec33490c67affef93aebf76e1238260c82d377 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Thu, 23 Feb 2006 09:35:06 +0100 Subject: [PATCH] USB: lh7a40x gadget driver: Fixed a dead lock There is a dead lock in lh7a40x udc driver. When the driver receive a SET_FEATURE HALT request, the dev lock is taken by the interrupt handler lh7a40x_udc_irq then the handler will call lh7a40x_set_halt function which in its turn will try to acquire the dev lock. Signed-off-by: Franck Bui-Huu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/lh7a40x_udc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index e02fea5a543..1a362c5e7f3 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -1062,11 +1062,11 @@ static int lh7a40x_ep_enable(struct usb_ep *_ep, ep->pio_irqs = 0; ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + spin_unlock_irqrestore(&ep->dev->lock, flags); + /* Reset halt state (does flush) */ lh7a40x_set_halt(_ep, 0); - spin_unlock_irqrestore(&ep->dev->lock, flags); - DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name); return 0; } @@ -1775,6 +1775,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) break; qep = &dev->ep[ep_num]; + spin_unlock(&dev->lock); if (ctrl.bRequest == USB_REQ_SET_FEATURE) { DEBUG_SETUP("SET_FEATURE (%d)\n", ep_num); @@ -1784,6 +1785,7 @@ static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr) ep_num); lh7a40x_set_halt(&qep->ep, 0); } + spin_lock(&dev->lock); usb_set_index(0); /* Reply with a ZLP on next IN token */ -- cgit v1.2.3 From 8763716bfe4d8a16bef28c9947cf9d799b1796a5 Mon Sep 17 00:00:00 2001 From: Shaun Tancheff Date: Wed, 22 Feb 2006 19:47:19 -0800 Subject: [PATCH] USB: Gadget RNDIS fix alloc bug. (buffer overflow) Remote NDIS response to OID_GEN_SUPPORTED_LIST only allocated space for the data attached to the reply, and not the reply structure itself. This caused other kmalloc'd memory to be corrupted. Signed-off-by: Shaun Tancheff Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/rndis.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 9689efeb364..6d6eaad7396 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -853,11 +853,14 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf) // DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID)); if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP; - /* - * we need more memory: - * oid_supported_list is the largest answer + /* + * we need more memory: + * gen_ndis_query_resp expects enough space for + * rndis_query_cmplt_type followed by data. + * oid_supported_list is the largest data reply */ - r = rndis_add_response (configNr, sizeof (oid_supported_list)); + r = rndis_add_response (configNr, + sizeof (oid_supported_list) + sizeof(rndis_query_cmplt_type)); if (!r) return -ENOMEM; resp = (rndis_query_cmplt_type *) r->buf; -- cgit v1.2.3 From 04d52461c6ecfc5b72e688b0eb2ead7b555eca25 Mon Sep 17 00:00:00 2001 From: Hendrik Schweppe Date: Sun, 19 Feb 2006 19:00:04 +0100 Subject: [PATCH] USB: visor.c id for gspda smartphone Added the USB vendorID of GSPDA and the productID of GSPDA's palm smartphone 'xplore m68' to the list of known devices. Signed-off-by: Hendrik Schweppe Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 3 +++ drivers/usb/serial/visor.h | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index bce3d55affd..11a48d87475 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -69,6 +69,8 @@ static struct usb_device_id id_table [] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID), @@ -139,6 +141,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) }, { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) }, diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h index b84d1cb4c69..765118d83fb 100644 --- a/drivers/usb/serial/visor.h +++ b/drivers/usb/serial/visor.h @@ -36,6 +36,9 @@ #define PALM_ZIRE_ID 0x0070 #define PALM_M100_ID 0x0080 +#define GSPDA_VENDOR_ID 0x115e +#define GSPDA_XPLORE_M68_ID 0xf100 + #define SONY_VENDOR_ID 0x054C #define SONY_CLIE_3_5_ID 0x0038 #define SONY_CLIE_4_0_ID 0x0066 -- cgit v1.2.3 From 34d1a8aa882df916e1b078dc935e3d2d3792aea2 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 27 Feb 2006 14:05:32 +0000 Subject: [PATCH] USB: ftdi_sio: new microHAM device IDs This patch adds a bunch of new device IDs to the ftdi_sio driver for various devices from microHAM using FTDI chips. Micheal Studer supplied the PID for the USB-Y9 device. I examined the INF file in microHAM's Windows driver package for the USB-KW, USB-YS, USB-IC, USB-DB9 and USB-RS232 devices. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 6 ++++++ drivers/usb/serial/ftdi_sio.h | 10 +++++++++- 2 files changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f2b4ca8692d..c145e1ed842 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -469,8 +469,14 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index ca40f16370f..bdef3b8c731 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -333,10 +333,18 @@ /* * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) . + * Submitted by Justin Burket (KL1RL) + * and Mike Studer (K6EEP) . + * Ian Abbott added a few more from the driver INF file. */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ /* * Active Robots product ids. -- cgit v1.2.3 From 958ddb75b04b792c701b2b08acdb200d638abf4e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 27 Feb 2006 13:13:54 -0800 Subject: [PATCH] sky2: remove MSI support Remove Message Signaled Interrupt support (for 2.6.16). MSI is inherently edge-triggered and that is incompatiable (without more work) with NAPI. In future, will replace with smarter lockless-IRQ handling like tg3.c Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 77 ------------------------------------------------------ drivers/net/sky2.h | 1 - 2 files changed, 78 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index ca8160d6822..72c1630977d 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -96,10 +96,6 @@ static int copybreak __read_mostly = 256; module_param(copybreak, int, 0); MODULE_PARM_DESC(copybreak, "Receive copy threshold"); -static int disable_msi = 0; -module_param(disable_msi, int, 0); -MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); - static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, @@ -3126,61 +3122,6 @@ static void __devinit sky2_show_addr(struct net_device *dev) dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); } -/* Handle software interrupt used during MSI test */ -static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id, - struct pt_regs *regs) -{ - struct sky2_hw *hw = dev_id; - u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2); - - if (status == 0) - return IRQ_NONE; - - if (status & Y2_IS_IRQ_SW) { - sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); - hw->msi = 1; - } - sky2_write32(hw, B0_Y2_SP_ICR, 2); - - sky2_read32(hw, B0_IMSK); - return IRQ_HANDLED; -} - -/* Test interrupt path by forcing a a software IRQ */ -static int __devinit sky2_test_msi(struct sky2_hw *hw) -{ - struct pci_dev *pdev = hw->pdev; - int i, err; - - sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW); - - err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw); - if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); - return err; - } - - sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); - wmb(); - - for (i = 0; i < 10; i++) { - barrier(); - if (hw->msi) - goto found; - mdelay(1); - } - - err = -EOPNOTSUPP; - sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); - found: - sky2_write32(hw, B0_IMSK, 0); - - free_irq(pdev->irq, hw); - - return err; -} - static int __devinit sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -3302,20 +3243,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - if (!disable_msi && pci_enable_msi(pdev) == 0) { - err = sky2_test_msi(hw); - if (err == -EOPNOTSUPP) { - /* MSI test failed, go back to INTx mode */ - printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, " - "switching to INTx mode. Please report this failure to " - "the PCI maintainer and include system chipset information.\n", - pci_name(pdev)); - pci_disable_msi(pdev); - } - else if (err) - goto err_out_unregister; - } - err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, DRV_NAME, hw); if (err) { @@ -3332,8 +3259,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: - if (hw->msi) - pci_disable_msi(pdev); if (dev1) { unregister_netdev(dev1); free_netdev(dev1); @@ -3376,8 +3301,6 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); - if (hw->msi) - pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 3edb98075e0..dce955c76f3 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1881,7 +1881,6 @@ struct sky2_hw { u32 intr_mask; int pm_cap; - int msi; u8 chip_id; u8 chip_rev; u8 copper; -- cgit v1.2.3 From 9cff3372bf665652e9dd71c09b817c20f58f754a Mon Sep 17 00:00:00 2001 From: John Bowler Date: Tue, 28 Feb 2006 16:59:08 -0800 Subject: [PATCH] drivers/mtd/redboot.c: recognise a foreign byte sex partition table The RedBoot boot loader writes flash partition tables containing native byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an LE kernel from BE RedBoot) the current MTD driver fails to handle the partition table and therefore is unable to generate the correct partition map for the flash. So far as I am aware this problem is ARM specific, because only ARM supports software change of the CPU (memory system) byte sex, however the partition table parsing is in generic MTD code. The patch below has been tested on NSLU2 (an IXP4XX based system) with a patch, 10-ixp4xx-copy-from.patch (submitted to linux-arm-kernel - it's ARM specific) required to make the maps/ixp4xx.c driver work with an LE kernel. Builds of the patched system are in the 'unstable' release of OpenSlug and UcSlugC available from www.nslu2-linux.org. These builds are BE, the archives at www.nslu2-linux.org and www.handhelds.org (see monotone.vanille.de) can be built LE (currently DISTRO targets nslu-ltu.conf for LE thumb uclibc (32 bit kernel) and nslu2-lau.conf, nslu2-lag.conf for LE arm uclibc/glibc) and this patch has been tested extensively will both BE and LE systems on the NSLU2 (including swapping between BE and LE by reflashing from both RedBoot and Linux). The patch recognises that the FIS directory (the partition table) is byte-reversed by examining the partition table size, which is known to be one erase block (this is an assumption made elsewhere in redboot.c). If the size matches the erase block after byte swapping the value then byte-reversal is assumed, if not no further action is taken. The patched code is fail safe; should redboot.c be changed to support a partition table with a modified size field the test will fail and the partition table will be assumed to have the host byte sex. If byte-reversal is detected the patch byte swaps the remainder of the 32 bit fields in the copy of the table; this copy is then used to set up the MTD partition map. Signed-off-by: John Bowler Cc: David Woodhouse Cc: Thomas Gleixner Cc: Martin Michlmayr Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mtd/redboot.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 7b7ca5ab5ae..d01b6a9198e 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -89,8 +89,34 @@ static int parse_redboot_partitions(struct mtd_info *master, i = numslots; break; } - if (!memcmp(buf[i].name, "FIS directory", 14)) + if (!memcmp(buf[i].name, "FIS directory", 14)) { + /* This is apparently the FIS directory entry for the + * FIS directory itself. The FIS directory size is + * one erase block, if the buf[i].size field is + * swab32(erasesize) then we know we are looking at + * a byte swapped FIS directory - swap all the entries! + * (NOTE: this is 'size' not 'data_length', size is + * the full size of the entry.) + */ + if (swab32(buf[i].size) == master->erasesize) { + int j; + for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { + /* The unsigned long fields were written with the + * wrong byte sex, name and pad have no byte sex. + */ +# define do_swab32(x) (x) = swab32(x) + do_swab32(buf[j].flash_base); + do_swab32(buf[j].mem_base); + do_swab32(buf[j].size); + do_swab32(buf[j].entry_point); + do_swab32(buf[j].data_length); + do_swab32(buf[j].desc_cksum); + do_swab32(buf[j].file_cksum); +# undef do_swab32 + } + } break; + } } if (i == numslots) { /* Didn't find it */ -- cgit v1.2.3 From 15b370c95cbc1553eec30a99a5ffb3ac3c8d7b81 Mon Sep 17 00:00:00 2001 From: Pat Gefre Date: Tue, 28 Feb 2006 16:59:09 -0800 Subject: [PATCH] Altix: more ioc3 cleanups and locking fixes Some "inline" removing that Andrew suggested, removed some locking on add/remove at this level - we'll let the callees decide. Signed-off-by: Patrick Gefre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/sn/ioc3.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c index 12357e1fa55..93449a1a006 100644 --- a/drivers/sn/ioc3.c +++ b/drivers/sn/ioc3.c @@ -62,7 +62,7 @@ static int nic_reset(struct ioc3_driver_data *idd) return presence; } -static inline int nic_read_bit(struct ioc3_driver_data *idd) +static int nic_read_bit(struct ioc3_driver_data *idd) { int result; unsigned long flags; @@ -77,7 +77,7 @@ static inline int nic_read_bit(struct ioc3_driver_data *idd) return result; } -static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit) +static void nic_write_bit(struct ioc3_driver_data *idd, int bit) { if (bit) writel(mcr_pack(6, 110), &idd->vma->mcr); @@ -371,8 +371,7 @@ static void probe_nic(struct ioc3_driver_data *idd) /* Interrupts */ -static inline void -write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which) +static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which) { unsigned long flags; @@ -735,14 +734,12 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) } /* Add this IOC3 to all submodules */ - read_lock(&ioc3_submodules_lock); for(id=0;idprobe) { idd->active[id] = 1; idd->active[id] = !ioc3_submodules[id]->probe (ioc3_submodules[id], idd); } - read_unlock(&ioc3_submodules_lock); printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev)); @@ -767,7 +764,6 @@ static void ioc3_remove(struct pci_dev *pdev) idd = pci_get_drvdata(pdev); /* Remove this IOC3 from all submodules */ - read_lock(&ioc3_submodules_lock); for(id=0;idactive[id]) { if(ioc3_submodules[id] && ioc3_submodules[id]->remove) @@ -781,7 +777,6 @@ static void ioc3_remove(struct pci_dev *pdev) pci_name(pdev)); idd->active[id] = 0; } - read_unlock(&ioc3_submodules_lock); /* Clear and disable all IRQs */ write_ireg(idd, ~0, IOC3_W_IEC); -- cgit v1.2.3 From 8b613e1ccf1b7ac9acc73eaa07f5aeffd3c2bb8d Mon Sep 17 00:00:00 2001 From: Adam Belay Date: Tue, 28 Feb 2006 16:59:10 -0800 Subject: [PATCH] pnp bus type fix This is Adam's pnp probing fix. It's been reported to fix hangs on several people's machines. I don't know if it's official or final, and Adam isn't contactable at present. But I'm not aware of the patch causing any regressions. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pnp/card.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c index aaa568a3806..b68eef25161 100644 --- a/drivers/pnp/card.c +++ b/drivers/pnp/card.c @@ -303,13 +303,11 @@ found: down_write(&dev->dev.bus->subsys.rwsem); dev->card_link = clink; dev->dev.driver = &drv->link.driver; - if (drv->link.driver.probe) { - if (drv->link.driver.probe(&dev->dev)) { - dev->dev.driver = NULL; - dev->card_link = NULL; - up_write(&dev->dev.bus->subsys.rwsem); - return NULL; - } + if (pnp_bus_type.probe(&dev->dev)) { + dev->dev.driver = NULL; + dev->card_link = NULL; + up_write(&dev->dev.bus->subsys.rwsem); + return NULL; } device_bind_driver(&dev->dev); up_write(&dev->dev.bus->subsys.rwsem); -- cgit v1.2.3 From 1f050a19e122100507302a77f1969a014e21650e Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 28 Feb 2006 16:59:13 -0800 Subject: [PATCH] video1394: fix "return E;" typo Signed-off-by: Alexey Dobriyan Cc: Ben Collins Cc: Jody McIntyre Cc: Stefan Richter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ieee1394/video1394.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c index 39fb88309e8..216dbbf1dc8 100644 --- a/drivers/ieee1394/video1394.c +++ b/drivers/ieee1394/video1394.c @@ -744,7 +744,7 @@ static int __video1394_ioctl(struct file *file, if (i == ISO_CHANNELS) { PRINT(KERN_ERR, ohci->host->id, "No free channel found"); - return EAGAIN; + return -EAGAIN; } if (!(ohci->ISO_channel_usage & mask)) { v.channel = i; -- cgit v1.2.3 From 6af6aab34a88050c8270ef75ddbdefef5c1dca00 Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Tue, 28 Feb 2006 16:59:15 -0800 Subject: [PATCH] tty buffering: comment out debug code Comment out debug code in tty receive buffering. For performance reasons (I'll keep it enabled in -mm). Signed-off-by: Paul Fulghum Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index e9bba94fc89..53d3d066554 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -303,7 +303,7 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size) t->commit = 0; t->read = 0; /* DEBUG ONLY */ - memset(t->data, '*', size); +/* memset(t->data, '*', size); */ /* printk("Flip recycle %p\n", t); */ return t; } -- cgit v1.2.3 From 2641dfd981e4a3eebf387f21cf10685af06e1641 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Tue, 28 Feb 2006 16:59:20 -0800 Subject: [PATCH] synclink_gt: make ->init_error signed Examples of misuse are 3112 info->init_error = -1; 4440 if ((info->init_error = register_test(info)) < 0) { Signed-off-by: Darren Jenkins Signed-off-by: Alexey Dobriyan Acked-by: Paul Fulghum Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/synclink_gt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index a85a60a93de..b046390cd25 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -306,7 +306,7 @@ struct slgt_info { int tx_active; unsigned char signals; /* serial signal states */ - unsigned int init_error; /* initialization error */ + int init_error; /* initialization error */ unsigned char *tx_buf; int tx_count; -- cgit v1.2.3