From d782c3f95c9263dc0b98e7115f75f1e18b9600b3 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 22 Jun 2009 13:17:08 +0800 Subject: drm/mode: add the CVT algorithm in kernel space Add the CVT algorithm in kernel space. And this function can be called to generate the required modeline. I copied it from the file of xserver/hw/xfree86/modes/xf86cvt.c. What I have done is to translate it by using integer calculation. This is to avoid the float-point calculation in kernel space. [airlied:- cleaned up some bits] Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_modes.c | 219 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 219 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 54f492a488a..0dbc7e4f864 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -8,6 +8,7 @@ * Copyright © 2007 Dave Airlie * Copyright © 2007-2008 Intel Corporation * Jesse Barnes + * Copyright 2005-2006 Luc Verhaegen * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), @@ -61,6 +62,224 @@ void drm_mode_debug_printmodeline(struct drm_display_mode *mode) } EXPORT_SYMBOL(drm_mode_debug_printmodeline); +/** + * drm_cvt_mode -create a modeline based on CVT algorithm + * @dev: DRM device + * @hdisplay: hdisplay size + * @vdisplay: vdisplay size + * @vrefresh : vrefresh rate + * @reduced : Whether the GTF calculation is simplified + * @interlaced:Whether the interlace is supported + * + * LOCKING: + * none. + * + * return the modeline based on CVT algorithm + * + * This function is called to generate the modeline based on CVT algorithm + * according to the hdisplay, vdisplay, vrefresh. + * It is based from the VESA(TM) Coordinated Video Timing Generator by + * Graham Loveridge April 9, 2003 available at + * http://www.vesa.org/public/CVT/CVTd6r1.xls + * + * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. + * What I have done is to translate it by using integer calculation. + */ +#define HV_FACTOR 1000 +struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, + int vdisplay, int vrefresh, + bool reduced, bool interlaced) +{ + /* 1) top/bottom margin size (% of height) - default: 1.8, */ +#define CVT_MARGIN_PERCENTAGE 18 + /* 2) character cell horizontal granularity (pixels) - default 8 */ +#define CVT_H_GRANULARITY 8 + /* 3) Minimum vertical porch (lines) - default 3 */ +#define CVT_MIN_V_PORCH 3 + /* 4) Minimum number of vertical back porch lines - default 6 */ +#define CVT_MIN_V_BPORCH 6 + /* Pixel Clock step (kHz) */ +#define CVT_CLOCK_STEP 250 + struct drm_display_mode *drm_mode; + bool margins = false; + unsigned int vfieldrate, hperiod; + int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync; + int interlace; + + /* allocate the drm_display_mode structure. If failure, we will + * return directly + */ + drm_mode = drm_mode_create(dev); + if (!drm_mode) + return NULL; + + /* the CVT default refresh rate is 60Hz */ + if (!vrefresh) + vrefresh = 60; + + /* the required field fresh rate */ + if (interlaced) + vfieldrate = vrefresh * 2; + else + vfieldrate = vrefresh; + + /* horizontal pixels */ + hdisplay_rnd = hdisplay - (hdisplay % CVT_H_GRANULARITY); + + /* determine the left&right borders */ + hmargin = 0; + if (margins) { + hmargin = hdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; + hmargin -= hmargin % CVT_H_GRANULARITY; + } + /* find the total active pixels */ + drm_mode->hdisplay = hdisplay_rnd + 2 * hmargin; + + /* find the number of lines per field */ + if (interlaced) + vdisplay_rnd = vdisplay / 2; + else + vdisplay_rnd = vdisplay; + + /* find the top & bottom borders */ + vmargin = 0; + if (margins) + vmargin = vdisplay_rnd * CVT_MARGIN_PERCENTAGE / 1000; + + drm_mode->vdisplay = vdisplay_rnd + 2 * vmargin; + + /* Interlaced */ + if (interlaced) + interlace = 1; + else + interlace = 0; + + /* Determine VSync Width from aspect ratio */ + if (!(vdisplay % 3) && ((vdisplay * 4 / 3) == hdisplay)) + vsync = 4; + else if (!(vdisplay % 9) && ((vdisplay * 16 / 9) == hdisplay)) + vsync = 5; + else if (!(vdisplay % 10) && ((vdisplay * 16 / 10) == hdisplay)) + vsync = 6; + else if (!(vdisplay % 4) && ((vdisplay * 5 / 4) == hdisplay)) + vsync = 7; + else if (!(vdisplay % 9) && ((vdisplay * 15 / 9) == hdisplay)) + vsync = 7; + else /* custom */ + vsync = 10; + + if (!reduced) { + /* simplify the GTF calculation */ + /* 4) Minimum time of vertical sync + back porch interval (µs) + * default 550.0 + */ + int tmp1, tmp2; +#define CVT_MIN_VSYNC_BP 550 + /* 3) Nominal HSync width (% of line period) - default 8 */ +#define CVT_HSYNC_PERCENTAGE 8 + unsigned int hblank_percentage; + int vsyncandback_porch, vback_porch, hblank; + + /* estimated the horizontal period */ + tmp1 = HV_FACTOR * 1000000 - + CVT_MIN_VSYNC_BP * HV_FACTOR * vfieldrate; + tmp2 = (vdisplay_rnd + 2 * vmargin + CVT_MIN_V_PORCH) * 2 + + interlace; + hperiod = tmp1 * 2 / (tmp2 * vfieldrate); + + tmp1 = CVT_MIN_VSYNC_BP * HV_FACTOR / hperiod + 1; + /* 9. Find number of lines in sync + backporch */ + if (tmp1 < (vsync + CVT_MIN_V_PORCH)) + vsyncandback_porch = vsync + CVT_MIN_V_PORCH; + else + vsyncandback_porch = tmp1; + /* 10. Find number of lines in back porch */ + vback_porch = vsyncandback_porch - vsync; + drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + + vsyncandback_porch + CVT_MIN_V_PORCH; + /* 5) Definition of Horizontal blanking time limitation */ + /* Gradient (%/kHz) - default 600 */ +#define CVT_M_FACTOR 600 + /* Offset (%) - default 40 */ +#define CVT_C_FACTOR 40 + /* Blanking time scaling factor - default 128 */ +#define CVT_K_FACTOR 128 + /* Scaling factor weighting - default 20 */ +#define CVT_J_FACTOR 20 +#define CVT_M_PRIME (CVT_M_FACTOR * CVT_K_FACTOR / 256) +#define CVT_C_PRIME ((CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \ + CVT_J_FACTOR) + /* 12. Find ideal blanking duty cycle from formula */ + hblank_percentage = CVT_C_PRIME * HV_FACTOR - CVT_M_PRIME * + hperiod / 1000; + /* 13. Blanking time */ + if (hblank_percentage < 20 * HV_FACTOR) + hblank_percentage = 20 * HV_FACTOR; + hblank = drm_mode->hdisplay * hblank_percentage / + (100 * HV_FACTOR - hblank_percentage); + hblank -= hblank % (2 * CVT_H_GRANULARITY); + /* 14. find the total pixes per line */ + drm_mode->htotal = drm_mode->hdisplay + hblank; + drm_mode->hsync_end = drm_mode->hdisplay + hblank / 2; + drm_mode->hsync_start = drm_mode->hsync_end - + (drm_mode->htotal * CVT_HSYNC_PERCENTAGE) / 100; + drm_mode->hsync_start += CVT_H_GRANULARITY - + drm_mode->hsync_start % CVT_H_GRANULARITY; + /* fill the Vsync values */ + drm_mode->vsync_start = drm_mode->vdisplay + CVT_MIN_V_PORCH; + drm_mode->vsync_end = drm_mode->vsync_start + vsync; + } else { + /* Reduced blanking */ + /* Minimum vertical blanking interval time (µs)- default 460 */ +#define CVT_RB_MIN_VBLANK 460 + /* Fixed number of clocks for horizontal sync */ +#define CVT_RB_H_SYNC 32 + /* Fixed number of clocks for horizontal blanking */ +#define CVT_RB_H_BLANK 160 + /* Fixed number of lines for vertical front porch - default 3*/ +#define CVT_RB_VFPORCH 3 + int vbilines; + int tmp1, tmp2; + /* 8. Estimate Horizontal period. */ + tmp1 = HV_FACTOR * 1000000 - + CVT_RB_MIN_VBLANK * HV_FACTOR * vfieldrate; + tmp2 = vdisplay_rnd + 2 * vmargin; + hperiod = tmp1 / (tmp2 * vfieldrate); + /* 9. Find number of lines in vertical blanking */ + vbilines = CVT_RB_MIN_VBLANK * HV_FACTOR / hperiod + 1; + /* 10. Check if vertical blanking is sufficient */ + if (vbilines < (CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH)) + vbilines = CVT_RB_VFPORCH + vsync + CVT_MIN_V_BPORCH; + /* 11. Find total number of lines in vertical field */ + drm_mode->vtotal = vdisplay_rnd + 2 * vmargin + vbilines; + /* 12. Find total number of pixels in a line */ + drm_mode->htotal = drm_mode->hdisplay + CVT_RB_H_BLANK; + /* Fill in HSync values */ + drm_mode->hsync_end = drm_mode->hdisplay + CVT_RB_H_BLANK / 2; + drm_mode->hsync_start = drm_mode->hsync_end = CVT_RB_H_SYNC; + } + /* 15/13. Find pixel clock frequency (kHz for xf86) */ + drm_mode->clock = drm_mode->htotal * HV_FACTOR * 1000 / hperiod; + drm_mode->clock -= drm_mode->clock % CVT_CLOCK_STEP; + /* 18/16. Find actual vertical frame frequency */ + /* ignore - just set the mode flag for interlaced */ + if (interlaced) + drm_mode->vtotal *= 2; + /* Fill the mode line name */ + drm_mode_set_name(drm_mode); + if (reduced) + drm_mode->flags |= (DRM_MODE_FLAG_PHSYNC | + DRM_MODE_FLAG_NVSYNC); + else + drm_mode->flags |= (DRM_MODE_FLAG_PVSYNC | + DRM_MODE_FLAG_NHSYNC); + if (interlaced) + drm_mode->flags |= DRM_MODE_FLAG_INTERLACE; + + return drm_mode; +} +EXPORT_SYMBOL(drm_cvt_mode); + /** * drm_mode_set_name - set the name on a mode * @mode: name will be set in this mode -- cgit v1.2.3