From 2d56f3a32c0e62f99c043d2579840f9731fe5855 Mon Sep 17 00:00:00 2001
From: Philip Langdale <philipl@overt.org>
Date: Thu, 16 Oct 2008 22:31:42 -0400
Subject: Input: refactor evdev 32bit compat to be shareable with uinput

Currently, evdev has working 32bit compatibility and uinput does not. uinput
needs the input_event code that evdev uses, so let's refactor it so it can
be shared.

[dtor@mail.ru: add fix for force feedback compat issues]
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/Makefile       |   2 +-
 drivers/input/evdev.c        | 197 ++-----------------------------------------
 drivers/input/input-compat.c | 135 +++++++++++++++++++++++++++++
 drivers/input/input-compat.h |  94 +++++++++++++++++++++
 drivers/input/misc/uinput.c  | 172 +++++++++++++++++++++++++++++++------
 5 files changed, 383 insertions(+), 217 deletions(-)
 create mode 100644 drivers/input/input-compat.c
 create mode 100644 drivers/input/input-compat.h

(limited to 'drivers')

diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 98c4f9a7787..4c9c745a702 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -5,7 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT)		+= input-core.o
-input-core-objs := input.o ff-core.o
+input-core-objs := input.o input-compat.o ff-core.o
 
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
 obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 3524bef62be..377b2007377 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -19,7 +19,7 @@
 #include <linux/input.h>
 #include <linux/major.h>
 #include <linux/device.h>
-#include <linux/compat.h>
+#include "input-compat.h"
 
 struct evdev {
 	int exist;
@@ -291,187 +291,6 @@ static int evdev_open(struct inode *inode, struct file *file)
 	return error;
 }
 
-#ifdef CONFIG_COMPAT
-
-struct input_event_compat {
-	struct compat_timeval time;
-	__u16 type;
-	__u16 code;
-	__s32 value;
-};
-
-struct ff_periodic_effect_compat {
-	__u16 waveform;
-	__u16 period;
-	__s16 magnitude;
-	__s16 offset;
-	__u16 phase;
-
-	struct ff_envelope envelope;
-
-	__u32 custom_len;
-	compat_uptr_t custom_data;
-};
-
-struct ff_effect_compat {
-	__u16 type;
-	__s16 id;
-	__u16 direction;
-	struct ff_trigger trigger;
-	struct ff_replay replay;
-
-	union {
-		struct ff_constant_effect constant;
-		struct ff_ramp_effect ramp;
-		struct ff_periodic_effect_compat periodic;
-		struct ff_condition_effect condition[2]; /* One for each axis */
-		struct ff_rumble_effect rumble;
-	} u;
-};
-
-/* Note to the author of this code: did it ever occur to
-   you why the ifdefs are needed? Think about it again. -AK */
-#ifdef CONFIG_X86_64
-#  define COMPAT_TEST is_compat_task()
-#elif defined(CONFIG_IA64)
-#  define COMPAT_TEST IS_IA32_PROCESS(task_pt_regs(current))
-#elif defined(CONFIG_S390)
-#  define COMPAT_TEST test_thread_flag(TIF_31BIT)
-#elif defined(CONFIG_MIPS)
-#  define COMPAT_TEST test_thread_flag(TIF_32BIT_ADDR)
-#else
-#  define COMPAT_TEST test_thread_flag(TIF_32BIT)
-#endif
-
-static inline size_t evdev_event_size(void)
-{
-	return COMPAT_TEST ?
-		sizeof(struct input_event_compat) : sizeof(struct input_event);
-}
-
-static int evdev_event_from_user(const char __user *buffer,
-				 struct input_event *event)
-{
-	if (COMPAT_TEST) {
-		struct input_event_compat compat_event;
-
-		if (copy_from_user(&compat_event, buffer,
-				   sizeof(struct input_event_compat)))
-			return -EFAULT;
-
-		event->time.tv_sec = compat_event.time.tv_sec;
-		event->time.tv_usec = compat_event.time.tv_usec;
-		event->type = compat_event.type;
-		event->code = compat_event.code;
-		event->value = compat_event.value;
-
-	} else {
-		if (copy_from_user(event, buffer, sizeof(struct input_event)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int evdev_event_to_user(char __user *buffer,
-				const struct input_event *event)
-{
-	if (COMPAT_TEST) {
-		struct input_event_compat compat_event;
-
-		compat_event.time.tv_sec = event->time.tv_sec;
-		compat_event.time.tv_usec = event->time.tv_usec;
-		compat_event.type = event->type;
-		compat_event.code = event->code;
-		compat_event.value = event->value;
-
-		if (copy_to_user(buffer, &compat_event,
-				 sizeof(struct input_event_compat)))
-			return -EFAULT;
-
-	} else {
-		if (copy_to_user(buffer, event, sizeof(struct input_event)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-static int evdev_ff_effect_from_user(const char __user *buffer, size_t size,
-				     struct ff_effect *effect)
-{
-	if (COMPAT_TEST) {
-		struct ff_effect_compat *compat_effect;
-
-		if (size != sizeof(struct ff_effect_compat))
-			return -EINVAL;
-
-		/*
-		 * It so happens that the pointer which needs to be changed
-		 * is the last field in the structure, so we can copy the
-		 * whole thing and replace just the pointer.
-		 */
-
-		compat_effect = (struct ff_effect_compat *)effect;
-
-		if (copy_from_user(compat_effect, buffer,
-				   sizeof(struct ff_effect_compat)))
-			return -EFAULT;
-
-		if (compat_effect->type == FF_PERIODIC &&
-		    compat_effect->u.periodic.waveform == FF_CUSTOM)
-			effect->u.periodic.custom_data =
-				compat_ptr(compat_effect->u.periodic.custom_data);
-	} else {
-		if (size != sizeof(struct ff_effect))
-			return -EINVAL;
-
-		if (copy_from_user(effect, buffer, sizeof(struct ff_effect)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-#else
-
-static inline size_t evdev_event_size(void)
-{
-	return sizeof(struct input_event);
-}
-
-static int evdev_event_from_user(const char __user *buffer,
-				 struct input_event *event)
-{
-	if (copy_from_user(event, buffer, sizeof(struct input_event)))
-		return -EFAULT;
-
-	return 0;
-}
-
-static int evdev_event_to_user(char __user *buffer,
-				const struct input_event *event)
-{
-	if (copy_to_user(buffer, event, sizeof(struct input_event)))
-		return -EFAULT;
-
-	return 0;
-}
-
-static int evdev_ff_effect_from_user(const char __user *buffer, size_t size,
-				     struct ff_effect *effect)
-{
-	if (size != sizeof(struct ff_effect))
-		return -EINVAL;
-
-	if (copy_from_user(effect, buffer, sizeof(struct ff_effect)))
-		return -EFAULT;
-
-	return 0;
-}
-
-#endif /* CONFIG_COMPAT */
-
 static ssize_t evdev_write(struct file *file, const char __user *buffer,
 			   size_t count, loff_t *ppos)
 {
@@ -491,14 +310,14 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 
 	while (retval < count) {
 
-		if (evdev_event_from_user(buffer + retval, &event)) {
+		if (input_event_from_user(buffer + retval, &event)) {
 			retval = -EFAULT;
 			goto out;
 		}
 
 		input_inject_event(&evdev->handle,
 				   event.type, event.code, event.value);
-		retval += evdev_event_size();
+		retval += input_event_size();
 	}
 
  out:
@@ -532,7 +351,7 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
 	struct input_event event;
 	int retval;
 
-	if (count < evdev_event_size())
+	if (count < input_event_size())
 		return -EINVAL;
 
 	if (client->head == client->tail && evdev->exist &&
@@ -547,13 +366,13 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
 	if (!evdev->exist)
 		return -ENODEV;
 
-	while (retval + evdev_event_size() <= count &&
+	while (retval + input_event_size() <= count &&
 	       evdev_fetch_next_event(client, &event)) {
 
-		if (evdev_event_to_user(buffer + retval, &event))
+		if (input_event_to_user(buffer + retval, &event))
 			return -EFAULT;
 
-		retval += evdev_event_size();
+		retval += input_event_size();
 	}
 
 	return retval;
@@ -824,7 +643,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
 			if (_IOC_NR(cmd) == _IOC_NR(EVIOCSFF)) {
 
-				if (evdev_ff_effect_from_user(p, _IOC_SIZE(cmd), &effect))
+				if (input_ff_effect_from_user(p, _IOC_SIZE(cmd), &effect))
 					return -EFAULT;
 
 				error = input_ff_upload(dev, &effect, file);
diff --git a/drivers/input/input-compat.c b/drivers/input/input-compat.c
new file mode 100644
index 00000000000..1accb89ae66
--- /dev/null
+++ b/drivers/input/input-compat.c
@@ -0,0 +1,135 @@
+/*
+ * 32bit compatibility wrappers for the input subsystem.
+ *
+ * Very heavily based on evdev.c - Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <asm/uaccess.h>
+#include "input-compat.h"
+
+#ifdef CONFIG_COMPAT
+
+int input_event_from_user(const char __user *buffer,
+			  struct input_event *event)
+{
+	if (INPUT_COMPAT_TEST) {
+		struct input_event_compat compat_event;
+
+		if (copy_from_user(&compat_event, buffer,
+				   sizeof(struct input_event_compat)))
+			return -EFAULT;
+
+		event->time.tv_sec = compat_event.time.tv_sec;
+		event->time.tv_usec = compat_event.time.tv_usec;
+		event->type = compat_event.type;
+		event->code = compat_event.code;
+		event->value = compat_event.value;
+
+	} else {
+		if (copy_from_user(event, buffer, sizeof(struct input_event)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+int input_event_to_user(char __user *buffer,
+			const struct input_event *event)
+{
+	if (INPUT_COMPAT_TEST) {
+		struct input_event_compat compat_event;
+
+		compat_event.time.tv_sec = event->time.tv_sec;
+		compat_event.time.tv_usec = event->time.tv_usec;
+		compat_event.type = event->type;
+		compat_event.code = event->code;
+		compat_event.value = event->value;
+
+		if (copy_to_user(buffer, &compat_event,
+				 sizeof(struct input_event_compat)))
+			return -EFAULT;
+
+	} else {
+		if (copy_to_user(buffer, event, sizeof(struct input_event)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+int input_ff_effect_from_user(const char __user *buffer, size_t size,
+			      struct ff_effect *effect)
+{
+	if (INPUT_COMPAT_TEST) {
+		struct ff_effect_compat *compat_effect;
+
+		if (size != sizeof(struct ff_effect_compat))
+			return -EINVAL;
+
+		/*
+		 * It so happens that the pointer which needs to be changed
+		 * is the last field in the structure, so we can retrieve the
+		 * whole thing and replace just the pointer.
+		 */
+		compat_effect = (struct ff_effect_compat *)effect;
+
+		if (copy_from_user(compat_effect, buffer,
+				   sizeof(struct ff_effect_compat)))
+			return -EFAULT;
+
+		if (compat_effect->type == FF_PERIODIC &&
+		    compat_effect->u.periodic.waveform == FF_CUSTOM)
+			effect->u.periodic.custom_data =
+				compat_ptr(compat_effect->u.periodic.custom_data);
+	} else {
+		if (size != sizeof(struct ff_effect))
+			return -EINVAL;
+
+		if (copy_from_user(effect, buffer, sizeof(struct ff_effect)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+#else
+
+int input_event_from_user(const char __user *buffer,
+			 struct input_event *event)
+{
+	if (copy_from_user(event, buffer, sizeof(struct input_event)))
+		return -EFAULT;
+
+	return 0;
+}
+
+int input_event_to_user(char __user *buffer,
+			const struct input_event *event)
+{
+	if (copy_to_user(buffer, event, sizeof(struct input_event)))
+		return -EFAULT;
+
+	return 0;
+}
+
+int input_ff_effect_from_user(const char __user *buffer, size_t size,
+			      struct ff_effect *effect)
+{
+	if (size != sizeof(struct ff_effect))
+		return -EINVAL;
+
+	if (copy_from_user(effect, buffer, sizeof(struct ff_effect)))
+		return -EFAULT;
+
+	return 0;
+}
+
+#endif /* CONFIG_COMPAT */
+
+EXPORT_SYMBOL_GPL(input_event_from_user);
+EXPORT_SYMBOL_GPL(input_event_to_user);
+EXPORT_SYMBOL_GPL(input_ff_effect_from_user);
diff --git a/drivers/input/input-compat.h b/drivers/input/input-compat.h
new file mode 100644
index 00000000000..47cd9eaee66
--- /dev/null
+++ b/drivers/input/input-compat.h
@@ -0,0 +1,94 @@
+#ifndef _INPUT_COMPAT_H
+#define _INPUT_COMPAT_H
+
+/*
+ * 32bit compatibility wrappers for the input subsystem.
+ *
+ * Very heavily based on evdev.c - Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/compat.h>
+#include <linux/input.h>
+
+#ifdef CONFIG_COMPAT
+
+/* Note to the author of this code: did it ever occur to
+   you why the ifdefs are needed? Think about it again. -AK */
+#ifdef CONFIG_X86_64
+#  define INPUT_COMPAT_TEST is_compat_task()
+#elif defined(CONFIG_IA64)
+#  define INPUT_COMPAT_TEST IS_IA32_PROCESS(task_pt_regs(current))
+#elif defined(CONFIG_S390)
+#  define INPUT_COMPAT_TEST test_thread_flag(TIF_31BIT)
+#elif defined(CONFIG_MIPS)
+#  define INPUT_COMPAT_TEST test_thread_flag(TIF_32BIT_ADDR)
+#else
+#  define INPUT_COMPAT_TEST test_thread_flag(TIF_32BIT)
+#endif
+
+struct input_event_compat {
+	struct compat_timeval time;
+	__u16 type;
+	__u16 code;
+	__s32 value;
+};
+
+struct ff_periodic_effect_compat {
+	__u16 waveform;
+	__u16 period;
+	__s16 magnitude;
+	__s16 offset;
+	__u16 phase;
+
+	struct ff_envelope envelope;
+
+	__u32 custom_len;
+	compat_uptr_t custom_data;
+};
+
+struct ff_effect_compat {
+	__u16 type;
+	__s16 id;
+	__u16 direction;
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect_compat periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
+static inline size_t input_event_size(void)
+{
+	return INPUT_COMPAT_TEST ?
+		sizeof(struct input_event_compat) : sizeof(struct input_event);
+}
+
+#else
+
+static inline size_t input_event_size(void)
+{
+	return sizeof(struct input_event);
+}
+
+#endif /* CONFIG_COMPAT */
+
+int input_event_from_user(const char __user *buffer,
+			 struct input_event *event);
+
+int input_event_to_user(char __user *buffer,
+			const struct input_event *event);
+
+int input_ff_effect_from_user(const char __user *buffer, size_t size,
+			      struct ff_effect *effect);
+
+#endif /* _INPUT_COMPAT_H */
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 223d56d5555..46b7caeb281 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,6 +37,7 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
+#include "../input-compat.h"
 
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
@@ -78,6 +79,7 @@ static struct uinput_request* uinput_request_find(struct uinput_device *udev, in
 	/* Find an input request, by ID. Returns NULL if the ID isn't valid. */
 	if (id >= UINPUT_NUM_REQUESTS || id < 0)
 		return NULL;
+
 	return udev->requests[id];
 }
 
@@ -127,6 +129,17 @@ static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *eff
 	struct uinput_request request;
 	int retval;
 
+	/*
+	 * uinput driver does not currently support periodic effects with
+	 * custom waveform since it does not have a way to pass buffer of
+	 * samples (custom_data) to userspace. If ever there is a device
+	 * supporting custom waveforms we would need to define an additional
+	 * ioctl (UI_UPLOAD_SAMPLES) but for now we just bail out.
+	 */
+	if (effect->type == FF_PERIODIC &&
+			effect->u.periodic.waveform == FF_CUSTOM)
+		return -EINVAL;
+
 	request.id = -1;
 	init_completion(&request.done);
 	request.code = UI_FF_UPLOAD;
@@ -353,15 +366,15 @@ static inline ssize_t uinput_inject_event(struct uinput_device *udev, const char
 {
 	struct input_event ev;
 
-	if (count != sizeof(struct input_event))
+	if (count < input_event_size())
 		return -EINVAL;
 
-	if (copy_from_user(&ev, buffer, sizeof(struct input_event)))
+	if (input_event_from_user(buffer, &ev))
 		return -EFAULT;
 
 	input_event(udev->dev, ev.type, ev.code, ev.value);
 
-	return sizeof(struct input_event);
+	return input_event_size();
 }
 
 static ssize_t uinput_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
@@ -407,13 +420,13 @@ static ssize_t uinput_read(struct file *file, char __user *buffer, size_t count,
 		goto out;
 	}
 
-	while (udev->head != udev->tail && retval + sizeof(struct input_event) <= count) {
-		if (copy_to_user(buffer + retval, &udev->buff[udev->tail], sizeof(struct input_event))) {
+	while (udev->head != udev->tail && retval + input_event_size() <= count) {
+		if (input_event_to_user(buffer + retval, &udev->buff[udev->tail])) {
 			retval = -EFAULT;
 			goto out;
 		}
 		udev->tail = (udev->tail + 1) % UINPUT_BUFFER_SIZE;
-		retval += sizeof(struct input_event);
+		retval += input_event_size();
 	}
 
  out:
@@ -444,6 +457,93 @@ static int uinput_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+#ifdef CONFIG_COMPAT
+struct uinput_ff_upload_compat {
+	int			request_id;
+	int			retval;
+	struct ff_effect_compat	effect;
+	struct ff_effect_compat	old;
+};
+
+static int uinput_ff_upload_to_user(char __user *buffer,
+				    const struct uinput_ff_upload *ff_up)
+{
+	if (INPUT_COMPAT_TEST) {
+		struct uinput_ff_upload_compat ff_up_compat;
+
+		ff_up_compat.request_id = ff_up->request_id;
+		ff_up_compat.retval = ff_up->retval;
+		/*
+		 * It so happens that the pointer that gives us the trouble
+		 * is the last field in the structure. Since we don't support
+		 * custom waveforms in uinput anyway we can just copy the whole
+		 * thing (to the compat size) and ignore the pointer.
+		 */
+		memcpy(&ff_up_compat.effect, &ff_up->effect,
+			sizeof(struct ff_effect_compat));
+		memcpy(&ff_up_compat.old, &ff_up->old,
+			sizeof(struct ff_effect_compat));
+
+		if (copy_to_user(buffer, &ff_up_compat,
+				 sizeof(struct uinput_ff_upload_compat)))
+			return -EFAULT;
+	} else {
+		if (copy_to_user(buffer, ff_up,
+				 sizeof(struct uinput_ff_upload)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int uinput_ff_upload_from_user(const char __user *buffer,
+				      struct uinput_ff_upload *ff_up)
+{
+	if (INPUT_COMPAT_TEST) {
+		struct uinput_ff_upload_compat ff_up_compat;
+
+		if (copy_from_user(&ff_up_compat, buffer,
+				   sizeof(struct uinput_ff_upload_compat)))
+			return -EFAULT;
+
+		ff_up->request_id = ff_up_compat.request_id;
+		ff_up->retval = ff_up_compat.retval;
+		memcpy(&ff_up->effect, &ff_up_compat.effect,
+			sizeof(struct ff_effect_compat));
+		memcpy(&ff_up->old, &ff_up_compat.old,
+			sizeof(struct ff_effect_compat));
+
+	} else {
+		if (copy_from_user(ff_up, buffer,
+				   sizeof(struct uinput_ff_upload)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+#else
+
+static int uinput_ff_upload_to_user(char __user *buffer,
+				    const struct uinput_ff_upload *ff_up)
+{
+	if (copy_to_user(buffer, ff_up, sizeof(struct uinput_ff_upload)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int uinput_ff_upload_from_user(const char __user *buffer,
+				      struct uinput_ff_upload *ff_up)
+{
+	if (copy_from_user(ff_up, buffer, sizeof(struct uinput_ff_upload)))
+		return -EFAULT;
+
+	return 0;
+}
+
+#endif
+
 #define uinput_set_bit(_arg, _bit, _max)		\
 ({							\
 	int __ret = 0;					\
@@ -455,19 +555,17 @@ static int uinput_release(struct inode *inode, struct file *file)
 	__ret;						\
 })
 
-static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
+				 unsigned long arg, void __user *p)
 {
 	int			retval;
-	struct uinput_device	*udev;
-	void __user             *p = (void __user *)arg;
+	struct uinput_device	*udev = file->private_data;
 	struct uinput_ff_upload ff_up;
 	struct uinput_ff_erase  ff_erase;
 	struct uinput_request   *req;
 	int                     length;
 	char			*phys;
 
-	udev = file->private_data;
-
 	retval = mutex_lock_interruptible(&udev->mutex);
 	if (retval)
 		return retval;
@@ -549,26 +647,24 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			break;
 
 		case UI_BEGIN_FF_UPLOAD:
-			if (copy_from_user(&ff_up, p, sizeof(ff_up))) {
-				retval = -EFAULT;
+			retval = uinput_ff_upload_from_user(p, &ff_up);
+			if (retval)
 				break;
-			}
+
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code == UI_FF_UPLOAD && req->u.upload.effect)) {
+			if (!req || req->code != UI_FF_UPLOAD || !req->u.upload.effect) {
 				retval = -EINVAL;
 				break;
 			}
+
 			ff_up.retval = 0;
-			memcpy(&ff_up.effect, req->u.upload.effect, sizeof(struct ff_effect));
+			ff_up.effect = *req->u.upload.effect;
 			if (req->u.upload.old)
-				memcpy(&ff_up.old, req->u.upload.old, sizeof(struct ff_effect));
+				ff_up.old = *req->u.upload.old;
 			else
 				memset(&ff_up.old, 0, sizeof(struct ff_effect));
 
-			if (copy_to_user(p, &ff_up, sizeof(ff_up))) {
-				retval = -EFAULT;
-				break;
-			}
+			retval = uinput_ff_upload_to_user(p, &ff_up);
 			break;
 
 		case UI_BEGIN_FF_ERASE:
@@ -576,29 +672,34 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				retval = -EFAULT;
 				break;
 			}
+
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code == UI_FF_ERASE)) {
+			if (!req || req->code != UI_FF_ERASE) {
 				retval = -EINVAL;
 				break;
 			}
+
 			ff_erase.retval = 0;
 			ff_erase.effect_id = req->u.effect_id;
 			if (copy_to_user(p, &ff_erase, sizeof(ff_erase))) {
 				retval = -EFAULT;
 				break;
 			}
+
 			break;
 
 		case UI_END_FF_UPLOAD:
-			if (copy_from_user(&ff_up, p, sizeof(ff_up))) {
-				retval = -EFAULT;
+			retval = uinput_ff_upload_from_user(p, &ff_up);
+			if (retval)
 				break;
-			}
+
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code == UI_FF_UPLOAD && req->u.upload.effect)) {
+			if (!req || req->code != UI_FF_UPLOAD ||
+			    !req->u.upload.effect) {
 				retval = -EINVAL;
 				break;
 			}
+
 			req->retval = ff_up.retval;
 			uinput_request_done(udev, req);
 			break;
@@ -608,11 +709,13 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				retval = -EFAULT;
 				break;
 			}
+
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code == UI_FF_ERASE)) {
+			if (!req || req->code != UI_FF_ERASE) {
 				retval = -EINVAL;
 				break;
 			}
+
 			req->retval = ff_erase.retval;
 			uinput_request_done(udev, req);
 			break;
@@ -626,6 +729,18 @@ static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	return retval;
 }
 
+static long uinput_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	return uinput_ioctl_handler(file, cmd, arg, (void __user *)arg);
+}
+
+#ifdef CONFIG_COMPAT
+static long uinput_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	return uinput_ioctl_handler(file, cmd, arg, compat_ptr(arg));
+}
+#endif
+
 static const struct file_operations uinput_fops = {
 	.owner		= THIS_MODULE,
 	.open		= uinput_open,
@@ -634,6 +749,9 @@ static const struct file_operations uinput_fops = {
 	.write		= uinput_write,
 	.poll		= uinput_poll,
 	.unlocked_ioctl	= uinput_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= uinput_compat_ioctl,
+#endif
 };
 
 static struct miscdevice uinput_misc = {
-- 
cgit v1.2.3


From b4a3ac9a3c26e82e31f8a8f55cb014bc580b1216 Mon Sep 17 00:00:00 2001
From: John Linn <john.linn@xilinx.com>
Date: Mon, 27 Oct 2008 22:17:22 -0400
Subject: Input: xilinx_ps2 - various cleanups

Review comments were incorporated to improve the driver.

1. Some data was eliminated that was not needed.
2. Renaming of variables for clarity.
3. Removed unneeded type casting.
4. Changed to use dev_err rather than other I/O.
5. Merged together some functions.
6. Added kerneldoc format to functions.

Signed-off-by: Sadanand <sadanan@xilinx.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/xilinx_ps2.c | 220 ++++++++++++++++++++-------------------
 1 file changed, 113 insertions(+), 107 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 765007899d9..ebb22f88c84 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -58,23 +58,20 @@
 
 /* Mask for all the Receive Interrupts */
 #define XPS2_IPIXR_RX_ALL	(XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR |  \
-					XPS2_IPIXR_RX_FULL)
+				 XPS2_IPIXR_RX_FULL)
 
 /* Mask for all the Interrupts */
 #define XPS2_IPIXR_ALL		(XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL |  \
-					XPS2_IPIXR_WDT_TOUT)
+				 XPS2_IPIXR_WDT_TOUT)
 
 /* Global Interrupt Enable mask */
 #define XPS2_GIER_GIE_MASK	0x80000000
 
 struct xps2data {
 	int irq;
-	u32 phys_addr;
-	u32 remap_size;
 	spinlock_t lock;
-	u8 rxb;				/* Rx buffer */
 	void __iomem *base_address;	/* virt. address of control registers */
-	unsigned int dfl;
+	unsigned int flags;
 	struct serio serio;		/* serio */
 };
 
@@ -82,8 +79,13 @@ struct xps2data {
 /* XPS PS/2 data transmission calls */
 /************************************/
 
-/*
- * xps2_recv() will attempt to receive a byte of data from the PS/2 port.
+/**
+ * xps2_recv() - attempts to receive a byte from the PS/2 port.
+ * @drvdata:	pointer to ps2 device private data structure
+ * @byte:	address where the read data will be copied
+ *
+ * If there is any data available in the PS/2 receiver, this functions reads
+ * the data, otherwise it returns error.
  */
 static int xps2_recv(struct xps2data *drvdata, u8 *byte)
 {
@@ -116,33 +118,27 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
 
 	/* Check which interrupt is active */
 	if (intr_sr & XPS2_IPIXR_RX_OVF)
-		printk(KERN_WARNING "%s: receive overrun error\n",
-			drvdata->serio.name);
+		dev_warn(drvdata->serio.dev.parent, "receive overrun error\n");
 
 	if (intr_sr & XPS2_IPIXR_RX_ERR)
-		drvdata->dfl |= SERIO_PARITY;
+		drvdata->flags |= SERIO_PARITY;
 
 	if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT))
-		drvdata->dfl |= SERIO_TIMEOUT;
+		drvdata->flags |= SERIO_TIMEOUT;
 
 	if (intr_sr & XPS2_IPIXR_RX_FULL) {
-		status = xps2_recv(drvdata, &drvdata->rxb);
+		status = xps2_recv(drvdata, &c);
 
 		/* Error, if a byte is not received */
 		if (status) {
-			printk(KERN_ERR
-				"%s: wrong rcvd byte count (%d)\n",
-				drvdata->serio.name, status);
+			dev_err(drvdata->serio.dev.parent,
+				"wrong rcvd byte count (%d)\n", status);
 		} else {
-			c = drvdata->rxb;
-			serio_interrupt(&drvdata->serio, c, drvdata->dfl);
-			drvdata->dfl = 0;
+			serio_interrupt(&drvdata->serio, c, drvdata->flags);
+			drvdata->flags = 0;
 		}
 	}
 
-	if (intr_sr & XPS2_IPIXR_TX_ACK)
-		drvdata->dfl = 0;
-
 	return IRQ_HANDLED;
 }
 
@@ -150,8 +146,15 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
 /* serio callbacks */
 /*******************/
 
-/*
- * sxps2_write() sends a byte out through the PS/2 interface.
+/**
+ * sxps2_write() - sends a byte out through the PS/2 port.
+ * @pserio:	pointer to the serio structure of the PS/2 port
+ * @c:		data that needs to be written to the PS/2 port
+ *
+ * This function checks if the PS/2 transmitter is empty and sends a byte.
+ * Otherwise it returns error. Transmission fails only when nothing is connected
+ * to the PS/2 port. Thats why, we do not try to resend the data in case of a
+ * failure.
  */
 static int sxps2_write(struct serio *pserio, unsigned char c)
 {
@@ -174,33 +177,39 @@ static int sxps2_write(struct serio *pserio, unsigned char c)
 	return status;
 }
 
-/*
- * sxps2_open() is called when a port is open by the higher layer.
+/**
+ * sxps2_open() - called when a port is opened by the higher layer.
+ * @pserio:	pointer to the serio structure of the PS/2 device
+ *
+ * This function requests irq and enables interrupts for the PS/2 device.
  */
 static int sxps2_open(struct serio *pserio)
 {
 	struct xps2data *drvdata = pserio->port_data;
-	int retval;
+	int error;
+	u8 c;
 
-	retval = request_irq(drvdata->irq, &xps2_interrupt, 0,
+	error = request_irq(drvdata->irq, &xps2_interrupt, 0,
 				DRIVER_NAME, drvdata);
-	if (retval) {
-		printk(KERN_ERR
-			"%s: Couldn't allocate interrupt %d\n",
-			drvdata->serio.name, drvdata->irq);
-		return retval;
+	if (error) {
+		dev_err(drvdata->serio.dev.parent,
+			"Couldn't allocate interrupt %d\n", drvdata->irq);
+		return error;
 	}
 
 	/* start reception by enabling the interrupts */
 	out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK);
 	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL);
-	(void)xps2_recv(drvdata, &drvdata->rxb);
+	(void)xps2_recv(drvdata, &c);
 
 	return 0;		/* success */
 }
 
-/*
- * sxps2_close() frees the interrupt.
+/**
+ * sxps2_close() - frees the interrupt.
+ * @pserio:	pointer to the serio structure of the PS/2 device
+ *
+ * This function frees the irq and disables interrupts for the PS/2 device.
  */
 static void sxps2_close(struct serio *pserio)
 {
@@ -212,24 +221,41 @@ static void sxps2_close(struct serio *pserio)
 	free_irq(drvdata->irq, drvdata);
 }
 
-/*********************/
-/* Device setup code */
-/*********************/
-
-static int xps2_setup(struct device *dev, struct resource *regs_res,
-		      struct resource *irq_res)
+/**
+ * xps2_of_probe - probe method for the PS/2 device.
+ * @of_dev:	pointer to OF device structure
+ * @match:	pointer to the stucture used for matching a device
+ *
+ * This function probes the PS/2 device in the device tree.
+ * It initializes the driver data structure and the hardware.
+ * It returns 0, if the driver is bound to the PS/2 device, or a negative
+ * value if there is an error.
+ */
+static int __devinit xps2_of_probe(struct of_device *ofdev,
+				   const struct of_device_id *match)
 {
+	struct resource r_irq; /* Interrupt resources */
+	struct resource r_mem; /* IO mem resources */
 	struct xps2data *drvdata;
 	struct serio *serio;
-	unsigned long remap_size;
-	int retval;
+	struct device *dev = &ofdev->dev;
+	resource_size_t remap_size, phys_addr;
+	int error;
+
+	dev_info(dev, "Device Tree Probing \'%s\'\n",
+			ofdev->node->name);
 
-	if (!dev)
-		return -EINVAL;
+	/* Get iospace for the device */
+	error = of_address_to_resource(ofdev->node, 0, &r_mem);
+	if (error) {
+		dev_err(dev, "invalid address\n");
+		return error;
+	}
 
-	if (!regs_res || !irq_res) {
-		dev_err(dev, "IO resource(s) not found\n");
-		return -EINVAL;
+	/* Get IRQ for the device */
+	if (of_irq_to_resource(ofdev->node, 0, &r_irq) == NO_IRQ) {
+		dev_err(dev, "no IRQ found\n");
+		return -ENODEV;
 	}
 
 	drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
@@ -241,24 +267,23 @@ static int xps2_setup(struct device *dev, struct resource *regs_res,
 	dev_set_drvdata(dev, drvdata);
 
 	spin_lock_init(&drvdata->lock);
-	drvdata->irq = irq_res->start;
-
-	remap_size = regs_res->end - regs_res->start + 1;
-	if (!request_mem_region(regs_res->start, remap_size, DRIVER_NAME)) {
-		dev_err(dev, "Couldn't lock memory region at 0x%08X\n",
-			(unsigned int)regs_res->start);
-		retval = -EBUSY;
+	drvdata->irq = r_irq.start;
+
+	phys_addr = r_mem.start;
+	remap_size = r_mem.end - r_mem.start + 1;
+	if (!request_mem_region(phys_addr, remap_size, DRIVER_NAME)) {
+		dev_err(dev, "Couldn't lock memory region at 0x%08llX\n",
+			(unsigned long long)phys_addr);
+		error = -EBUSY;
 		goto failed1;
 	}
 
 	/* Fill in configuration data and add them to the list */
-	drvdata->phys_addr = regs_res->start;
-	drvdata->remap_size = remap_size;
-	drvdata->base_address = ioremap(regs_res->start, remap_size);
+	drvdata->base_address = ioremap(phys_addr, remap_size);
 	if (drvdata->base_address == NULL) {
-		dev_err(dev, "Couldn't ioremap memory at 0x%08X\n",
-			(unsigned int)regs_res->start);
-		retval = -EFAULT;
+		dev_err(dev, "Couldn't ioremap memory at 0x%08llX\n",
+			(unsigned long long)phys_addr);
+		error = -EFAULT;
 		goto failed2;
 	}
 
@@ -269,8 +294,9 @@ static int xps2_setup(struct device *dev, struct resource *regs_res,
 	 * we have the PS2 in a good state */
 	out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
 
-	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n",
-		drvdata->phys_addr, drvdata->base_address, drvdata->irq);
+	dev_info(dev, "Xilinx PS2 at 0x%08llX mapped to 0x%p, irq=%d\n",
+		 (unsigned long long)phys_addr, drvdata->base_address,
+		 drvdata->irq);
 
 	serio = &drvdata->serio;
 	serio->id.type = SERIO_8042;
@@ -280,71 +306,51 @@ static int xps2_setup(struct device *dev, struct resource *regs_res,
 	serio->port_data = drvdata;
 	serio->dev.parent = dev;
 	snprintf(serio->name, sizeof(serio->name),
-		 "Xilinx XPS PS/2 at %08X", drvdata->phys_addr);
+		 "Xilinx XPS PS/2 at %08llX", (unsigned long long)phys_addr);
 	snprintf(serio->phys, sizeof(serio->phys),
-		 "xilinxps2/serio at %08X", drvdata->phys_addr);
+		 "xilinxps2/serio at %08llX", (unsigned long long)phys_addr);
+
 	serio_register_port(serio);
 
 	return 0;		/* success */
 
 failed2:
-	release_mem_region(regs_res->start, remap_size);
+	release_mem_region(phys_addr, remap_size);
 failed1:
 	kfree(drvdata);
 	dev_set_drvdata(dev, NULL);
 
-	return retval;
-}
-
-/***************************/
-/* OF Platform Bus Support */
-/***************************/
-
-static int __devinit xps2_of_probe(struct of_device *ofdev, const struct
-				   of_device_id * match)
-{
-	struct resource r_irq; /* Interrupt resources */
-	struct resource r_mem; /* IO mem resources */
-	int rc = 0;
-
-	printk(KERN_INFO "Device Tree Probing \'%s\'\n",
-			ofdev->node->name);
-
-	/* Get iospace for the device */
-	rc = of_address_to_resource(ofdev->node, 0, &r_mem);
-	if (rc) {
-		dev_err(&ofdev->dev, "invalid address\n");
-		return rc;
-	}
-
-	/* Get IRQ for the device */
-	rc = of_irq_to_resource(ofdev->node, 0, &r_irq);
-	if (rc == NO_IRQ) {
-		dev_err(&ofdev->dev, "no IRQ found\n");
-		return rc;
-	}
-
-	return xps2_setup(&ofdev->dev, &r_mem, &r_irq);
+	return error;
 }
 
+/**
+ * xps2_of_remove - unbinds the driver from the PS/2 device.
+ * @of_dev:	pointer to OF device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees any resources allocated to
+ * the device.
+ */
 static int __devexit xps2_of_remove(struct of_device *of_dev)
 {
 	struct device *dev = &of_dev->dev;
-	struct xps2data *drvdata;
-
-	if (!dev)
-		return -EINVAL;
-
-	drvdata = dev_get_drvdata(dev);
+	struct xps2data *drvdata = dev_get_drvdata(dev);
+	struct resource r_mem; /* IO mem resources */
 
 	serio_unregister_port(&drvdata->serio);
 	iounmap(drvdata->base_address);
-	release_mem_region(drvdata->phys_addr, drvdata->remap_size);
+
+	/* Get iospace of the device */
+	if (of_address_to_resource(of_dev->node, 0, &r_mem))
+		dev_err(dev, "invalid address\n");
+	else
+		release_mem_region(r_mem.start, r_mem.end - r_mem.start + 1);
+
 	kfree(drvdata);
 
 	dev_set_drvdata(dev, NULL);
 
-	return 0;		/* success */
+	return 0;
 }
 
 /* Match table for of_platform binding */
-- 
cgit v1.2.3


From b67b4b117746aef686e527c3205792db0f2c9e16 Mon Sep 17 00:00:00 2001
From: Dominic Curran <dcurran@ti.com>
Date: Mon, 27 Oct 2008 22:30:53 -0400
Subject: Input: gpio-keys - add flag to allow auto repeat

This patch adds a flag to gpio-key driver to turn on the input subsystems
auto repeat feature if needed.

Signed-off-by: Dominic Curran <dcurran@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/gpio_keys.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 05f3f43582c..ad67d763fdb 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -98,6 +98,10 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	input->id.product = 0x0001;
 	input->id.version = 0x0100;
 
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (pdata->rep)
+		__set_bit(EV_REP, input->evbit);
+
 	ddata->input = input;
 
 	for (i = 0; i < pdata->nbuttons; i++) {
-- 
cgit v1.2.3


From 09779678d12482024e06380cacc4c3ff2f129f23 Mon Sep 17 00:00:00 2001
From: Stelian Pop <stelian@popies.net>
Date: Tue, 28 Oct 2008 23:20:46 -0400
Subject: Input: appletouch - driver refactoring

The appletouch driver has grown up from supporting only a couple of
touchpads into supporting many touchpads, which can have different
number of sensors, different aspect ratios etc.

This patch cleans up the current driver code and makes it easy to
support the features of each different touchpad.

As a side effect, this patch also modifies the 'Y' multiplication factor
of the 'geyser3' and 'geyser4' touchpads (found on Core Duo and Core2
Duo MacBook and MacBook Pro laptops) in order to make the touchpad
output match the aspect ratio of the touchpad (Y factor changed from 43
to 64).

[dtor@mail.ru: make atp_info constant]
Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/appletouch.c | 274 +++++++++++++++++++--------------------
 1 file changed, 136 insertions(+), 138 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 079816e6b23..454b96112f0 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2005-2008 Johannes Berg (johannes@sipsolutions.net)
- * Copyright (C) 2005      Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005-2008 Stelian Pop (stelian@popies.net)
  * Copyright (C) 2005      Frank Arnold (frank@scirocco-5v-turbo.de)
  * Copyright (C) 2005      Peter Osterlund (petero2@telia.com)
  * Copyright (C) 2005      Michael Hanselmann (linux-kernel@hansmi.ch)
@@ -35,16 +35,74 @@
 #include <linux/module.h>
 #include <linux/usb/input.h>
 
-/* Type of touchpad */
-enum atp_touchpad_type {
-	ATP_FOUNTAIN,
-	ATP_GEYSER1,
-	ATP_GEYSER2,
-	ATP_GEYSER3,
-	ATP_GEYSER4
+/*
+ * Note: We try to keep the touchpad aspect ratio while still doing only
+ * simple arithmetics:
+ *	0 <= x <= (xsensors - 1) * xfact
+ *	0 <= y <= (ysensors - 1) * yfact
+ */
+struct atp_info {
+	int xsensors;				/* number of X sensors */
+	int xsensors_17;			/* 17" models have more sensors */
+	int ysensors;				/* number of Y sensors */
+	int xfact;				/* X multiplication factor */
+	int yfact;				/* Y multiplication factor */
+	int datalen;				/* size of USB transfers */
+	void (*callback)(struct urb *);		/* callback function */
+};
+
+static void atp_complete_geyser_1_2(struct urb *urb);
+static void atp_complete_geyser_3_4(struct urb *urb);
+
+static const struct atp_info fountain_info = {
+	.xsensors	= 16,
+	.xsensors_17	= 26,
+	.ysensors	= 16,
+	.xfact		= 64,
+	.yfact		= 43,
+	.datalen	= 81,
+	.callback	= atp_complete_geyser_1_2,
+};
+
+static const struct atp_info geyser1_info = {
+	.xsensors	= 16,
+	.xsensors_17	= 26,
+	.ysensors	= 16,
+	.xfact		= 64,
+	.yfact		= 43,
+	.datalen	= 81,
+	.callback	= atp_complete_geyser_1_2,
+};
+
+static const struct atp_info geyser2_info = {
+	.xsensors	= 15,
+	.xsensors_17	= 20,
+	.ysensors	= 9,
+	.xfact		= 64,
+	.yfact		= 43,
+	.datalen	= 64,
+	.callback	= atp_complete_geyser_1_2,
+};
+
+static const struct atp_info geyser3_info = {
+	.xsensors	= 20,
+	.ysensors	= 10,
+	.xfact		= 64,
+	.yfact		= 64,
+	.datalen	= 64,
+	.callback	= atp_complete_geyser_3_4,
 };
 
-#define ATP_DEVICE(prod, type)					\
+static const struct atp_info geyser4_info = {
+	.xsensors	= 20,
+	.ysensors	= 10,
+	.xfact		= 64,
+	.yfact		= 64,
+	.datalen	= 64,
+	.callback	= atp_complete_geyser_3_4,
+};
+
+#define ATP_DEVICE(prod, info)					\
 {								\
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |		\
 		       USB_DEVICE_ID_MATCH_INT_CLASS |		\
@@ -53,7 +111,7 @@ enum atp_touchpad_type {
 	.idProduct = (prod),					\
 	.bInterfaceClass = 0x03,				\
 	.bInterfaceProtocol = 0x02,				\
-	.driver_info = ATP_ ## type,				\
+	.driver_info = (unsigned long) &info,			\
 }
 
 /*
@@ -62,43 +120,39 @@ enum atp_touchpad_type {
  *  According to Info.plist Geyser IV is the same as Geyser III.)
  */
 
-static struct usb_device_id atp_table [] = {
+static struct usb_device_id atp_table[] = {
 	/* PowerBooks Feb 2005, iBooks G4 */
-	ATP_DEVICE(0x020e, FOUNTAIN),	/* FOUNTAIN ANSI */
-	ATP_DEVICE(0x020f, FOUNTAIN),	/* FOUNTAIN ISO */
-	ATP_DEVICE(0x030a, FOUNTAIN),	/* FOUNTAIN TP ONLY */
-	ATP_DEVICE(0x030b, GEYSER1),	/* GEYSER 1 TP ONLY */
+	ATP_DEVICE(0x020e, fountain_info),	/* FOUNTAIN ANSI */
+	ATP_DEVICE(0x020f, fountain_info),	/* FOUNTAIN ISO */
+	ATP_DEVICE(0x030a, fountain_info),	/* FOUNTAIN TP ONLY */
+	ATP_DEVICE(0x030b, geyser1_info),	/* GEYSER 1 TP ONLY */
 
 	/* PowerBooks Oct 2005 */
-	ATP_DEVICE(0x0214, GEYSER2),	/* GEYSER 2 ANSI */
-	ATP_DEVICE(0x0215, GEYSER2),	/* GEYSER 2 ISO */
-	ATP_DEVICE(0x0216, GEYSER2),	/* GEYSER 2 JIS */
+	ATP_DEVICE(0x0214, geyser2_info),	/* GEYSER 2 ANSI */
+	ATP_DEVICE(0x0215, geyser2_info),	/* GEYSER 2 ISO */
+	ATP_DEVICE(0x0216, geyser2_info),	/* GEYSER 2 JIS */
 
 	/* Core Duo MacBook & MacBook Pro */
-	ATP_DEVICE(0x0217, GEYSER3),	/* GEYSER 3 ANSI */
-	ATP_DEVICE(0x0218, GEYSER3),	/* GEYSER 3 ISO */
-	ATP_DEVICE(0x0219, GEYSER3),	/* GEYSER 3 JIS */
+	ATP_DEVICE(0x0217, geyser3_info),	/* GEYSER 3 ANSI */
+	ATP_DEVICE(0x0218, geyser3_info),	/* GEYSER 3 ISO */
+	ATP_DEVICE(0x0219, geyser3_info),	/* GEYSER 3 JIS */
 
 	/* Core2 Duo MacBook & MacBook Pro */
-	ATP_DEVICE(0x021a, GEYSER4),	/* GEYSER 4 ANSI */
-	ATP_DEVICE(0x021b, GEYSER4),	/* GEYSER 4 ISO */
-	ATP_DEVICE(0x021c, GEYSER4),	/* GEYSER 4 JIS */
+	ATP_DEVICE(0x021a, geyser4_info),	/* GEYSER 4 ANSI */
+	ATP_DEVICE(0x021b, geyser4_info),	/* GEYSER 4 ISO */
+	ATP_DEVICE(0x021c, geyser4_info),	/* GEYSER 4 JIS */
 
 	/* Core2 Duo MacBook3,1 */
-	ATP_DEVICE(0x0229, GEYSER4),	/* GEYSER 4 HF ANSI */
-	ATP_DEVICE(0x022a, GEYSER4),	/* GEYSER 4 HF ISO */
-	ATP_DEVICE(0x022b, GEYSER4),	/* GEYSER 4 HF JIS */
+	ATP_DEVICE(0x0229, geyser4_info),	/* GEYSER 4 HF ANSI */
+	ATP_DEVICE(0x022a, geyser4_info),	/* GEYSER 4 HF ISO */
+	ATP_DEVICE(0x022b, geyser4_info),	/* GEYSER 4 HF JIS */
 
 	/* Terminating entry */
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, atp_table);
 
-/*
- * number of sensors. Note that only 16 instead of 26 X (horizontal)
- * sensors exist on 12" and 15" PowerBooks. All models have 16 Y
- * (vertical) sensors.
- */
+/* maximum number of sensors */
 #define ATP_XSENSORS	26
 #define ATP_YSENSORS	16
 
@@ -107,21 +161,6 @@ MODULE_DEVICE_TABLE(usb, atp_table);
 
 /* maximum pressure this driver will report */
 #define ATP_PRESSURE	300
-/*
- * multiplication factor for the X and Y coordinates.
- * We try to keep the touchpad aspect ratio while still doing only simple
- * arithmetics.
- * The factors below give coordinates like:
- *
- *      0 <= x <  960 on 12" and 15" Powerbooks
- *      0 <= x < 1600 on 17" Powerbooks and 17" MacBook Pro
- *      0 <= x < 1216 on MacBooks and 15" MacBook Pro
- *
- *      0 <= y <  646 on all Powerbooks
- *      0 <= y <  774 on all MacBooks
- */
-#define ATP_XFACT	64
-#define ATP_YFACT	43
 
 /*
  * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is
@@ -159,7 +198,7 @@ struct atp {
 	struct urb		*urb;		/* usb request block */
 	u8			*data;		/* transferred data */
 	struct input_dev	*input;		/* input dev */
-	enum atp_touchpad_type	type;		/* type of touchpad */
+	const struct atp_info	*info;		/* touchpad model */
 	bool			open;
 	bool			valid;		/* are the samples valid? */
 	bool			size_detect_done;
@@ -169,7 +208,6 @@ struct atp {
 	signed char		xy_cur[ATP_XSENSORS + ATP_YSENSORS];
 	signed char		xy_old[ATP_XSENSORS + ATP_YSENSORS];
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
-	int			datalen;	/* size of USB transfer */
 	int			idlecount;	/* number of empty packets */
 	struct work_struct	work;
 };
@@ -359,7 +397,7 @@ static int atp_status_check(struct urb *urb)
 		if (!dev->overflow_warned) {
 			printk(KERN_WARNING "appletouch: OVERFLOW with data "
 				"length %d, actual length is %d\n",
-				dev->datalen, dev->urb->actual_length);
+				dev->info->datalen, dev->urb->actual_length);
 			dev->overflow_warned = true;
 		}
 	case -ECONNRESET:
@@ -377,7 +415,7 @@ static int atp_status_check(struct urb *urb)
 	}
 
 	/* drop incomplete datasets */
-	if (dev->urb->actual_length != dev->datalen) {
+	if (dev->urb->actual_length != dev->info->datalen) {
 		dprintk("appletouch: incomplete data package"
 			" (first byte: %d, length: %d).\n",
 			dev->data[0], dev->urb->actual_length);
@@ -387,6 +425,25 @@ static int atp_status_check(struct urb *urb)
 	return ATP_URB_STATUS_SUCCESS;
 }
 
+static void atp_detect_size(struct atp *dev)
+{
+	int i;
+
+	/* 17" Powerbooks have extra X sensors */
+	for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) {
+		if (dev->xy_cur[i]) {
+
+			printk(KERN_INFO "appletouch: 17\" model detected.\n");
+
+			input_set_abs_params(dev->input, ABS_X, 0,
+					     (dev->info->xsensors_17 - 1) *
+							dev->info->xfact - 1,
+					     ATP_FUZZ, 0);
+			break;
+		}
+	}
+}
+
 /*
  * USB interrupt callback functions
  */
@@ -407,7 +464,7 @@ static void atp_complete_geyser_1_2(struct urb *urb)
 		goto exit;
 
 	/* reorder the sensors values */
-	if (dev->type == ATP_GEYSER2) {
+	if (dev->info == &geyser2_info) {
 		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
 
 		/*
@@ -437,8 +494,8 @@ static void atp_complete_geyser_1_2(struct urb *urb)
 				dev->xy_cur[i + 24] = dev->data[5 * i + 44];
 
 			/* Y values */
-			dev->xy_cur[i + 26] = dev->data[5 * i +  1];
-			dev->xy_cur[i + 34] = dev->data[5 * i +  3];
+			dev->xy_cur[ATP_XSENSORS + i] = dev->data[5 * i +  1];
+			dev->xy_cur[ATP_XSENSORS + i + 8] = dev->data[5 * i + 3];
 		}
 	}
 
@@ -453,32 +510,8 @@ static void atp_complete_geyser_1_2(struct urb *urb)
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 
 		/* Perform size detection, if not done already */
-		if (!dev->size_detect_done) {
-
-			/* 17" Powerbooks have extra X sensors */
-			for (i = (dev->type == ATP_GEYSER2 ? 15 : 16);
-			     i < ATP_XSENSORS; i++) {
-				if (!dev->xy_cur[i])
-					continue;
-
-				printk(KERN_INFO
-					"appletouch: 17\" model detected.\n");
-
-				if (dev->type == ATP_GEYSER2)
-					input_set_abs_params(dev->input, ABS_X,
-							     0,
-							     (20 - 1) *
-							     ATP_XFACT - 1,
-							     ATP_FUZZ, 0);
-				else
-					input_set_abs_params(dev->input, ABS_X,
-							     0,
-							     (26 - 1) *
-							     ATP_XFACT - 1,
-							     ATP_FUZZ, 0);
-				break;
-			}
-
+		if (unlikely(!dev->size_detect_done)) {
+			atp_detect_size(dev);
 			dev->size_detect_done = 1;
 			goto exit;
 		}
@@ -499,10 +532,10 @@ static void atp_complete_geyser_1_2(struct urb *urb)
 	dbg_dump("accumulator", dev->xy_acc);
 
 	x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
-			      ATP_XFACT, &x_z, &x_f);
+			      dev->info->xfact, &x_z, &x_f);
 	y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
-			      ATP_YFACT, &y_z, &y_f);
-	key = dev->data[dev->datalen - 1] & ATP_STATUS_BUTTON;
+			      dev->info->yfact, &y_z, &y_f);
+	key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON;
 
 	if (x && y) {
 		if (dev->x_old != -1) {
@@ -583,7 +616,7 @@ static void atp_complete_geyser_3_4(struct urb *urb)
 	dbg_dump("sample", dev->xy_cur);
 
 	/* Just update the base values (i.e. touchpad in untouched state) */
-	if (dev->data[dev->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
+	if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
 
 		dprintk(KERN_DEBUG "appletouch: updated base values\n");
 
@@ -610,10 +643,10 @@ static void atp_complete_geyser_3_4(struct urb *urb)
 	dbg_dump("accumulator", dev->xy_acc);
 
 	x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
-			      ATP_XFACT, &x_z, &x_f);
+			      dev->info->xfact, &x_z, &x_f);
 	y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
-			      ATP_YFACT, &y_z, &y_f);
-	key = dev->data[dev->datalen - 1] & ATP_STATUS_BUTTON;
+			      dev->info->yfact, &y_z, &y_f);
+	key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON;
 
 	if (x && y) {
 		if (dev->x_old != -1) {
@@ -705,7 +738,7 @@ static int atp_handle_geyser(struct atp *dev)
 {
 	struct usb_device *udev = dev->udev;
 
-	if (dev->type != ATP_FOUNTAIN) {
+	if (dev->info != &fountain_info) {
 		/* switch to raw sensor mode */
 		if (atp_geyser_init(udev))
 			return -EIO;
@@ -726,6 +759,7 @@ static int atp_probe(struct usb_interface *iface,
 	struct usb_endpoint_descriptor *endpoint;
 	int int_in_endpointAddr = 0;
 	int i, error = -ENOMEM;
+	const struct atp_info *info = (const struct atp_info *)id->driver_info;
 
 	/* set up the endpoint information */
 	/* use only the first interrupt-in endpoint */
@@ -753,35 +787,22 @@ static int atp_probe(struct usb_interface *iface,
 
 	dev->udev = udev;
 	dev->input = input_dev;
-	dev->type = id->driver_info;
+	dev->info = info;
 	dev->overflow_warned = false;
-	if (dev->type == ATP_FOUNTAIN || dev->type == ATP_GEYSER1)
-		dev->datalen = 81;
-	else
-		dev->datalen = 64;
 
 	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->urb)
 		goto err_free_devs;
 
-	dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL,
+	dev->data = usb_buffer_alloc(dev->udev, dev->info->datalen, GFP_KERNEL,
 				     &dev->urb->transfer_dma);
 	if (!dev->data)
 		goto err_free_urb;
 
-	/* Select the USB complete (callback) function */
-	if (dev->type == ATP_FOUNTAIN ||
-	    dev->type == ATP_GEYSER1 ||
-	    dev->type == ATP_GEYSER2)
-		usb_fill_int_urb(dev->urb, udev,
-				 usb_rcvintpipe(udev, int_in_endpointAddr),
-				 dev->data, dev->datalen,
-				 atp_complete_geyser_1_2, dev, 1);
-	else
-		usb_fill_int_urb(dev->urb, udev,
-				 usb_rcvintpipe(udev, int_in_endpointAddr),
-				 dev->data, dev->datalen,
-				 atp_complete_geyser_3_4, dev, 1);
+	usb_fill_int_urb(dev->urb, udev,
+			 usb_rcvintpipe(udev, int_in_endpointAddr),
+			 dev->data, dev->info->datalen,
+			 dev->info->callback, dev, 1);
 
 	error = atp_handle_geyser(dev);
 	if (error)
@@ -802,35 +823,12 @@ static int atp_probe(struct usb_interface *iface,
 
 	set_bit(EV_ABS, input_dev->evbit);
 
-	if (dev->type == ATP_GEYSER3 || dev->type == ATP_GEYSER4) {
-		/*
-		 * MacBook have 20 X sensors, 10 Y sensors
-		 */
-		input_set_abs_params(input_dev, ABS_X, 0,
-				     ((20 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0);
-		input_set_abs_params(input_dev, ABS_Y, 0,
-				     ((10 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0);
-	} else if (dev->type == ATP_GEYSER2) {
-		/*
-		 * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected
-		 * later.
-		 */
-		input_set_abs_params(input_dev, ABS_X, 0,
-				     ((15 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0);
-		input_set_abs_params(input_dev, ABS_Y, 0,
-				     ((9 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0);
-	} else {
-		/*
-		 * 12" and 15" Powerbooks only have 16 x sensors,
-		 * 17" models are detected later.
-		 */
-		input_set_abs_params(input_dev, ABS_X, 0,
-				     (16 - 1) * ATP_XFACT - 1,
-				     ATP_FUZZ, 0);
-		input_set_abs_params(input_dev, ABS_Y, 0,
-				     (ATP_YSENSORS - 1) * ATP_YFACT - 1,
-				     ATP_FUZZ, 0);
-	}
+	input_set_abs_params(input_dev, ABS_X, 0,
+			     (dev->info->xsensors - 1) * dev->info->xfact - 1,
+			     ATP_FUZZ, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0,
+			     (dev->info->ysensors - 1) * dev->info->yfact - 1,
+			     ATP_FUZZ, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
 
 	set_bit(EV_KEY, input_dev->evbit);
@@ -852,7 +850,7 @@ static int atp_probe(struct usb_interface *iface,
 	return 0;
 
  err_free_buffer:
-	usb_buffer_free(dev->udev, dev->datalen,
+	usb_buffer_free(dev->udev, dev->info->datalen,
 			dev->data, dev->urb->transfer_dma);
  err_free_urb:
 	usb_free_urb(dev->urb);
@@ -871,7 +869,7 @@ static void atp_disconnect(struct usb_interface *iface)
 	if (dev) {
 		usb_kill_urb(dev->urb);
 		input_unregister_device(dev->input);
-		usb_buffer_free(dev->udev, dev->datalen,
+		usb_buffer_free(dev->udev, dev->info->datalen,
 				dev->data, dev->urb->transfer_dma);
 		usb_free_urb(dev->urb);
 		kfree(dev);
-- 
cgit v1.2.3


From 3cf35049d8b2ccab62bbb8991ad1322ff2276840 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Tue, 28 Oct 2008 23:53:19 -0400
Subject: Input: omap-keypad - interrupt disable fix

The GPIO interrupts are disabled several times after the first key press.
No need to disable - again - the interrupts in the omap_kp_scan_keypad
function on OMAP2.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/omap-keypad.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 69e674ecf19..a016c8d85a3 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -122,10 +122,6 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 
 	/* read the keypad status */
 	if (cpu_is_omap24xx()) {
-		int i;
-		for (i = 0; i < omap_kp->rows; i++)
-			disable_irq(OMAP_GPIO_IRQ(row_gpios[i]));
-
 		/* read the keypad status */
 		for (col = 0; col < omap_kp->cols; col++) {
 			set_col_gpio_val(omap_kp, ~(1 << col));
-- 
cgit v1.2.3


From dde4ac07263161264d089c7556d0295487787b77 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Tue, 28 Oct 2008 23:53:25 -0400
Subject: Input: omap-keypad - allow more than 6 rows

There is no reason to limit the GPIO rows to 6 for OMAP2.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/omap-keypad.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a016c8d85a3..ec0ebee4606 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -125,7 +125,7 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 		/* read the keypad status */
 		for (col = 0; col < omap_kp->cols; col++) {
 			set_col_gpio_val(omap_kp, ~(1 << col));
-			state[col] = ~(get_row_gpio_val(omap_kp)) & 0x3f;
+			state[col] = ~(get_row_gpio_val(omap_kp)) & 0xff;
 		}
 		set_col_gpio_val(omap_kp, 0);
 
-- 
cgit v1.2.3


From a6c2490f010d9235b1424110c6f414460e41dfe1 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Thu, 30 Oct 2008 00:07:50 -0400
Subject: Input: struct device - replace bus_id with dev_name(), dev_set_name()

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/evbug.c               | 6 +++---
 drivers/input/evdev.c               | 2 +-
 drivers/input/gameport/gameport.c   | 3 +--
 drivers/input/gameport/ns558.c      | 2 +-
 drivers/input/input.c               | 4 ++--
 drivers/input/joydev.c              | 2 +-
 drivers/input/mousedev.c            | 3 +--
 drivers/input/serio/pcips2.c        | 2 +-
 drivers/input/serio/serio.c         | 4 ++--
 drivers/input/touchscreen/ads7846.c | 4 ++--
 10 files changed, 15 insertions(+), 17 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/evbug.c b/drivers/input/evbug.c
index 0353601ac3b..f7c5c14ec12 100644
--- a/drivers/input/evbug.c
+++ b/drivers/input/evbug.c
@@ -39,7 +39,7 @@ MODULE_LICENSE("GPL");
 static void evbug_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
 {
 	printk(KERN_DEBUG "evbug.c: Event. Dev: %s, Type: %d, Code: %d, Value: %d\n",
-		handle->dev->dev.bus_id, type, code, value);
+		dev_name(&handle->dev->dev), type, code, value);
 }
 
 static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
@@ -65,7 +65,7 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 		goto err_unregister_handle;
 
 	printk(KERN_DEBUG "evbug.c: Connected device: %s (%s at %s)\n",
-		dev->dev.bus_id,
+		dev_name(&dev->dev),
 		dev->name ?: "unknown",
 		dev->phys ?: "unknown");
 
@@ -81,7 +81,7 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 static void evbug_disconnect(struct input_handle *handle)
 {
 	printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n",
-		handle->dev->dev.bus_id);
+		dev_name(&handle->dev->dev));
 
 	input_close_device(handle);
 	input_unregister_handle(handle);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 377b2007377..c69a58fe54d 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -820,7 +820,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 	evdev->handle.handler = handler;
 	evdev->handle.private = evdev;
 
-	strlcpy(evdev->dev.bus_id, evdev->name, sizeof(evdev->dev.bus_id));
+	dev_set_name(&evdev->dev, evdev->name);
 	evdev->dev.devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor);
 	evdev->dev.class = &input_class;
 	evdev->dev.parent = &dev->dev;
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 2880eaae157..ebf4be5b7c4 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -530,8 +530,7 @@ static void gameport_init_port(struct gameport *gameport)
 
 	mutex_init(&gameport->drv_mutex);
 	device_initialize(&gameport->dev);
-	snprintf(gameport->dev.bus_id, sizeof(gameport->dev.bus_id),
-		 "gameport%lu", (unsigned long)atomic_inc_return(&gameport_no) - 1);
+	dev_set_name(&gameport->dev, "gameport%lu", (unsigned long)atomic_inc_return(&gameport_no) - 1);
 	gameport->dev.bus = &gameport_bus;
 	gameport->dev.release = gameport_release_port;
 	if (gameport->parent)
diff --git a/drivers/input/gameport/ns558.c b/drivers/input/gameport/ns558.c
index 2b282cde4b8..db556b71ddd 100644
--- a/drivers/input/gameport/ns558.c
+++ b/drivers/input/gameport/ns558.c
@@ -226,7 +226,7 @@ static int ns558_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *did)
 	ns558->gameport = port;
 
 	gameport_set_name(port, "NS558 PnP Gameport");
-	gameport_set_phys(port, "pnp%s/gameport0", dev->dev.bus_id);
+	gameport_set_phys(port, "pnp%s/gameport0", dev_name(&dev->dev));
 	port->dev.parent = &dev->dev;
 	port->io = ioport;
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index c13ced3e0d3..1730d7331a5 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1389,8 +1389,8 @@ int input_register_device(struct input_dev *dev)
 	if (!dev->setkeycode)
 		dev->setkeycode = input_default_setkeycode;
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-		 "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1);
+	dev_set_name(&dev->dev, "input%ld",
+		     (unsigned long) atomic_inc_return(&input_no) - 1);
 
 	error = device_add(&dev->dev);
 	if (error)
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 65d7077a75a..f9b876bd378 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -801,7 +801,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 		}
 	}
 
-	strlcpy(joydev->dev.bus_id, joydev->name, sizeof(joydev->dev.bus_id));
+	dev_set_name(&joydev->dev, joydev->name);
 	joydev->dev.devt = MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor);
 	joydev->dev.class = &input_class;
 	joydev->dev.parent = &dev->dev;
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 8137e50ded8..4ab8b28bace 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -879,8 +879,7 @@ static struct mousedev *mousedev_create(struct input_dev *dev,
 	mousedev->handle.handler = handler;
 	mousedev->handle.private = mousedev;
 
-	strlcpy(mousedev->dev.bus_id, mousedev->name,
-		sizeof(mousedev->dev.bus_id));
+	dev_set_name(&mousedev->dev, mousedev->name);
 	mousedev->dev.class = &input_class;
 	if (dev)
 		mousedev->dev.parent = &dev->dev;
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 1b404f9e3bf..1dacbe0d934 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -153,7 +153,7 @@ static int __devinit pcips2_probe(struct pci_dev *dev, const struct pci_device_i
 	serio->open		= pcips2_open;
 	serio->close		= pcips2_close;
 	strlcpy(serio->name, pci_name(dev), sizeof(serio->name));
-	strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+	strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
 	serio->port_data	= ps2if;
 	serio->dev.parent	= &dev->dev;
 	ps2if->io		= serio;
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 2f12d60eee3..bc033250dfc 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -546,8 +546,8 @@ static void serio_init_port(struct serio *serio)
 	spin_lock_init(&serio->lock);
 	mutex_init(&serio->drv_mutex);
 	device_initialize(&serio->dev);
-	snprintf(serio->dev.bus_id, sizeof(serio->dev.bus_id),
-		 "serio%ld", (long)atomic_inc_return(&serio_no) - 1);
+	dev_set_name(&serio->dev, "serio%ld",
+			(long)atomic_inc_return(&serio_no) - 1);
 	serio->dev.bus = &serio_bus;
 	serio->dev.release = serio_release_port;
 	if (serio->parent) {
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index b9b7fc6ff1e..6017ea6e994 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -559,7 +559,7 @@ static void ads7846_rx(void *ads)
 	if (packet->tc.ignore || Rt > ts->pressure_max) {
 #ifdef VERBOSE
 		pr_debug("%s: ignored %d pressure %d\n",
-			ts->spi->dev.bus_id, packet->tc.ignore, Rt);
+			dev_name(&ts->spi->dev), packet->tc.ignore, Rt);
 #endif
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
 			      HRTIMER_MODE_REL);
@@ -947,7 +947,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		ts->penirq_recheck_delay_usecs =
 				pdata->penirq_recheck_delay_usecs;
 
-	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
 
 	input_dev->name = "ADS784x Touchscreen";
 	input_dev->phys = ts->phys;
-- 
cgit v1.2.3


From 2ec6f246c33a0b830a6ad3171161e9d880e2251e Mon Sep 17 00:00:00 2001
From: Nuno Lucas <ntlucas@gmail.com>
Date: Tue, 11 Nov 2008 16:48:04 -0500
Subject: Input: usbtouchscreen - fix TSC-10 DM USB controllers without EEPROM

The usbtouchscreen module implements a driver for the TSC-10 DM USB
touchscreen controllers, but assumes a 2-byte response for the
CMD_RESET and CMD_RATE commands, when they can be only a single byte
when no EEPROM is connected.

The driver worked with an earlier controller revision, but new
revisions of the controller fail.

It seems the problem is that the early controller had the
SEL4/EEPROM-CS pin high, but the new controller has it down, making
the response different.

Without the fix, the controller would answer the single byte 0x06
(ACK), making the init fail with -ENODEV because buf[1] is 0xFF (as
initialized before).

As the single byte is the only thing we need to check it was ok, there
is no need to verify the second byte.

The [0x15 0x01] case is the NAK [0x15] response for when there is no
data in the EEPROM [bit-0 of second byte set], so I let that be, as I
don't have any controller with an EEPROM.

With this patch, both the earlier and latest controller work the same.

Note: This was previously submited as BUG #11961 [1] on the bugzilla
tracker, but rebased to version 2.6.27.4 and with unnecessary comments
and printk's removed.

[1] http://bugzilla.kernel.org/show_bug.cgi?id=11961

Signed-off-by: Nuno Lucas <ntlucas@gmail.com>
Acked-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/usbtouchscreen.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index fdd645c214a..5080b26ba16 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -424,7 +424,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 	                      0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
 	if (ret < 0)
 		goto err_out;
-	if (buf[0] != 0x06 || buf[1] != 0x00) {
+	if (buf[0] != 0x06) {
 		ret = -ENODEV;
 		goto err_out;
 	}
@@ -437,8 +437,7 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
 	                      TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
 	if (ret < 0)
 		goto err_out;
-	if ((buf[0] != 0x06 || buf[1] != 0x00) &&
-	    (buf[0] != 0x15 || buf[1] != 0x01)) {
+	if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) {
 		ret = -ENODEV;
 		goto err_out;
 	}
-- 
cgit v1.2.3


From 59bdb43769f2c3995badcd930d799451f5a39f76 Mon Sep 17 00:00:00 2001
From: Zoltan Devai <zdevai@gmail.com>
Date: Wed, 12 Nov 2008 23:05:40 -0500
Subject: Input: pcspkr - fix PIT lockup on some chipsets

There've been reports [1] about the sysem bell causing a hard
lockup.  My machine was affected as well: any speaker output hung
the machine completely, nothing in the logs, no magic sysrq,
etc., looked like a hardware problem.  Had a closer look on the
issue, and it turned out that the pcspkr module is responsible.
The cause is the bad setup of Timer 2 in the i8253 controller,
which probably hangs the whole PIT controller.

Intel datasheets [2] state that the timer registers are in an
undefined state after reset and they need to be programmed before
enabling the timer. (And enabling without programming the
frequency first doesn't make sense anyway).

I don't know which chipsets are affected (if not all), it also
depends on the BIOS whether it initializes the timer (e.g. to
beep when you start the machine).

The following patch solved the issue on my ICH6 notebook,
couldn't test it with any others, but should be safe to apply.

[1]
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/146151
https://bugs.launchpad.net/ubuntu/+bug/270790
http://ubuntuforums.org/showthread.php?t=227693
http://bugs.gentoo.org/show_bug.cgi?id=222583
https://bugzilla.redhat.com/show_bug.cgi?id=454225

[2]
http://www.intel.com/assets/pdf/datasheet/252516.pdf
http://www.intel.com/assets/pdf/datasheet/301473.pdf
http://www.intel.com/design/chipsets/datashts/29065503.pdf

Signed-off-by: Zoltan Devai <zdevai@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/pcspkr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 43aaa5cebd1..d6a30cee7bc 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -52,13 +52,13 @@ static int pcspkr_event(struct input_dev *dev, unsigned int type, unsigned int c
 	spin_lock_irqsave(&i8253_lock, flags);
 
 	if (count) {
-		/* enable counter 2 */
-		outb_p(inb_p(0x61) | 3, 0x61);
 		/* set command for counter 2, 2 byte write */
 		outb_p(0xB6, 0x43);
 		/* select desired HZ */
 		outb_p(count & 0xff, 0x42);
 		outb((count >> 8) & 0xff, 0x42);
+		/* enable counter 2 */
+		outb_p(inb_p(0x61) | 3, 0x61);
 	} else {
 		/* disable counter 2 */
 		outb(inb_p(0x61) & 0xFC, 0x61);
-- 
cgit v1.2.3


From cec87e38e92cdfe86678ca2a5c29c38d05127601 Mon Sep 17 00:00:00 2001
From: Peter Popovec <popovec@oko.fei.tuke.sk>
Date: Tue, 11 Nov 2008 14:46:14 -0500
Subject: Input: add joystick driver for Walkera WK-0701 RC transmitter

Signed-off-by: Peter Popovec <popovec@fei.tuke.sk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/joystick/Kconfig       |  12 ++
 drivers/input/joystick/Makefile      |   1 +
 drivers/input/joystick/walkera0701.c | 292 +++++++++++++++++++++++++++++++++++
 3 files changed, 305 insertions(+)
 create mode 100644 drivers/input/joystick/walkera0701.c

(limited to 'drivers')

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index be5c14a5a0a..268dd3fef0a 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -294,4 +294,16 @@ config JOYSTICK_XPAD_LEDS
 	  This option enables support for the LED which surrounds the Big X on
 	  XBox 360 controller.
 
+config JOYSTICK_WALKERA0701
+	tristate "Walkera WK-0701 RC transmitter"
+	depends on HIGH_RES_TIMERS && PARPORT
+	help
+	  Say Y or M here if you have a Walkera WK-0701 transmitter which is
+	  supplied with a ready to fly Walkera helicopters such as HM36,
+	  HM37, HM60 and want to use it via parport as a joystick. More
+	  information is available: <file:Documentation/input/walkera0701.txt>
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called walkera0701.
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index fdbf8c4c287..72303629568 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -29,4 +29,5 @@ obj-$(CONFIG_JOYSTICK_TWIDJOY)		+= twidjoy.o
 obj-$(CONFIG_JOYSTICK_WARRIOR)		+= warrior.o
 obj-$(CONFIG_JOYSTICK_XPAD)		+= xpad.o
 obj-$(CONFIG_JOYSTICK_ZHENHUA)		+= zhenhua.o
+obj-$(CONFIG_JOYSTICK_WALKERA0701)	+= walkera0701.o
 
diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c
new file mode 100644
index 00000000000..4dfa1eed4b7
--- /dev/null
+++ b/drivers/input/joystick/walkera0701.c
@@ -0,0 +1,292 @@
+/*
+ *  Parallel port to Walkera WK-0701 TX joystick
+ *
+ *  Copyright (c) 2008 Peter Popovec
+ *
+ *  More about driver:  <file:Documentation/input/walkera0701.txt>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+
+/* #define WK0701_DEBUG */
+
+#define RESERVE 20000
+#define SYNC_PULSE 1306000
+#define BIN0_PULSE 288000
+#define BIN1_PULSE 438000
+
+#define ANALOG_MIN_PULSE 318000
+#define ANALOG_MAX_PULSE 878000
+#define ANALOG_DELTA 80000
+
+#define BIN_SAMPLE ((BIN0_PULSE + BIN1_PULSE) / 2)
+
+#define NO_SYNC 25
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/input.h>
+#include <linux/hrtimer.h>
+
+MODULE_AUTHOR("Peter Popovec <popovec@fei.tuke.sk>");
+MODULE_DESCRIPTION("Walkera WK-0701 TX as joystick");
+MODULE_LICENSE("GPL");
+
+static unsigned int walkera0701_pp_no;
+module_param_named(port, walkera0701_pp_no, int, 0);
+MODULE_PARM_DESC(port,
+		 "Parallel port adapter for Walkera WK-0701 TX (default is 0)");
+
+/*
+ * For now, only one device is supported, if somebody need more devices, code
+ * can be expanded, one struct walkera_dev per device must be allocated and
+ * set up by walkera0701_connect (release of device by walkera0701_disconnect)
+ */
+
+struct walkera_dev {
+	unsigned char buf[25];
+	u64 irq_time, irq_lasttime;
+	int counter;
+	int ack;
+
+	struct input_dev *input_dev;
+	struct hrtimer timer;
+
+	struct parport *parport;
+	struct pardevice *pardevice;
+};
+
+static struct walkera_dev w_dev;
+
+static inline void walkera0701_parse_frame(struct walkera_dev *w)
+{
+	int i;
+	int val1, val2, val3, val4, val5, val6, val7, val8;
+	int crc1, crc2;
+
+	for (crc1 = crc2 = i = 0; i < 10; i++) {
+		crc1 += w->buf[i] & 7;
+		crc2 += (w->buf[i] & 8) >> 3;
+	}
+	if ((w->buf[10] & 7) != (crc1 & 7))
+		return;
+	if (((w->buf[10] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1))
+		return;
+	for (crc1 = crc2 = 0, i = 11; i < 23; i++) {
+		crc1 += w->buf[i] & 7;
+		crc2 += (w->buf[i] & 8) >> 3;
+	}
+	if ((w->buf[23] & 7) != (crc1 & 7))
+		return;
+	if (((w->buf[23] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1))
+		return;
+	val1 = ((w->buf[0] & 7) * 256 + w->buf[1] * 16 + w->buf[2]) >> 2;
+	val1 *= ((w->buf[0] >> 2) & 2) - 1;	/* sign */
+	val2 = (w->buf[2] & 1) << 8 | (w->buf[3] << 4) | w->buf[4];
+	val2 *= (w->buf[2] & 2) - 1;	/* sign */
+	val3 = ((w->buf[5] & 7) * 256 + w->buf[6] * 16 + w->buf[7]) >> 2;
+	val3 *= ((w->buf[5] >> 2) & 2) - 1;	/* sign */
+	val4 = (w->buf[7] & 1) << 8 | (w->buf[8] << 4) | w->buf[9];
+	val4 *= (w->buf[7] & 2) - 1;	/* sign */
+	val5 = ((w->buf[11] & 7) * 256 + w->buf[12] * 16 + w->buf[13]) >> 2;
+	val5 *= ((w->buf[11] >> 2) & 2) - 1;	/* sign */
+	val6 = (w->buf[13] & 1) << 8 | (w->buf[14] << 4) | w->buf[15];
+	val6 *= (w->buf[13] & 2) - 1;	/* sign */
+	val7 = ((w->buf[16] & 7) * 256 + w->buf[17] * 16 + w->buf[18]) >> 2;
+	val7 *= ((w->buf[16] >> 2) & 2) - 1;	/*sign */
+	val8 = (w->buf[18] & 1) << 8 | (w->buf[19] << 4) | w->buf[20];
+	val8 *= (w->buf[18] & 2) - 1;	/*sign */
+
+#ifdef WK0701_DEBUG
+	{
+		int magic, magic_bit;
+		magic = (w->buf[21] << 4) | w->buf[22];
+		magic_bit = (w->buf[24] & 8) >> 3;
+		printk(KERN_DEBUG
+		       "walkera0701: %4d %4d %4d %4d  %4d %4d %4d %4d (magic %2x %d)\n",
+		       val1, val2, val3, val4, val5, val6, val7, val8, magic,
+		       magic_bit);
+	}
+#endif
+	input_report_abs(w->input_dev, ABS_X, val2);
+	input_report_abs(w->input_dev, ABS_Y, val1);
+	input_report_abs(w->input_dev, ABS_Z, val6);
+	input_report_abs(w->input_dev, ABS_THROTTLE, val3);
+	input_report_abs(w->input_dev, ABS_RUDDER, val4);
+	input_report_abs(w->input_dev, ABS_MISC, val7);
+	input_report_key(w->input_dev, BTN_GEAR_DOWN, val5 > 0);
+}
+
+static inline int read_ack(struct pardevice *p)
+{
+	return parport_read_status(p->port) & 0x40;
+}
+
+/* falling edge, prepare to BIN value calculation */
+static void walkera0701_irq_handler(void *handler_data)
+{
+	u64 pulse_time;
+	struct walkera_dev *w = handler_data;
+
+	w->irq_time = ktime_to_ns(ktime_get());
+	pulse_time = w->irq_time - w->irq_lasttime;
+	w->irq_lasttime = w->irq_time;
+
+	/* cancel timer, if in handler or active do resync */
+	if (unlikely(0 != hrtimer_try_to_cancel(&w->timer))) {
+		w->counter = NO_SYNC;
+		return;
+	}
+
+	if (w->counter < NO_SYNC) {
+		if (w->ack) {
+			pulse_time -= BIN1_PULSE;
+			w->buf[w->counter] = 8;
+		} else {
+			pulse_time -= BIN0_PULSE;
+			w->buf[w->counter] = 0;
+		}
+		if (w->counter == 24) {	/* full frame */
+			walkera0701_parse_frame(w);
+			w->counter = NO_SYNC;
+			if (abs(pulse_time - SYNC_PULSE) < RESERVE)	/* new frame sync */
+				w->counter = 0;
+		} else {
+			if ((pulse_time > (ANALOG_MIN_PULSE - RESERVE)
+			     && (pulse_time < (ANALOG_MAX_PULSE + RESERVE)))) {
+				pulse_time -= (ANALOG_MIN_PULSE - RESERVE);
+				pulse_time = (u32) pulse_time / ANALOG_DELTA;	/* overtiping is safe, pulsetime < s32.. */
+				w->buf[w->counter++] |= (pulse_time & 7);
+			} else
+				w->counter = NO_SYNC;
+		}
+	} else if (abs(pulse_time - SYNC_PULSE - BIN0_PULSE) <
+				RESERVE + BIN1_PULSE - BIN0_PULSE)	/* frame sync .. */
+		w->counter = 0;
+
+	hrtimer_start(&w->timer, ktime_set(0, BIN_SAMPLE), HRTIMER_MODE_REL);
+}
+
+static enum hrtimer_restart timer_handler(struct hrtimer
+					  *handle)
+{
+	struct walkera_dev *w;
+
+	w = container_of(handle, struct walkera_dev, timer);
+	w->ack = read_ack(w->pardevice);
+
+	return HRTIMER_NORESTART;
+}
+
+static int walkera0701_open(struct input_dev *dev)
+{
+	struct walkera_dev *w = input_get_drvdata(dev);
+
+	parport_enable_irq(w->parport);
+	return 0;
+}
+
+static void walkera0701_close(struct input_dev *dev)
+{
+	struct walkera_dev *w = input_get_drvdata(dev);
+
+	parport_disable_irq(w->parport);
+}
+
+static int walkera0701_connect(struct walkera_dev *w, int parport)
+{
+	int err = -ENODEV;
+
+	w->parport = parport_find_number(parport);
+	if (w->parport == NULL)
+		return -ENODEV;
+
+	if (w->parport->irq == -1) {
+		printk(KERN_ERR "walkera0701: parport without interrupt\n");
+		goto init_err;
+	}
+
+	err = -EBUSY;
+	w->pardevice = parport_register_device(w->parport, "walkera0701",
+				    NULL, NULL, walkera0701_irq_handler,
+				    PARPORT_DEV_EXCL, w);
+	if (!w->pardevice)
+		goto init_err;
+
+	if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT))
+		goto init_err1;
+
+	if (parport_claim(w->pardevice))
+		goto init_err1;
+
+	w->input_dev = input_allocate_device();
+	if (!w->input_dev)
+		goto init_err2;
+
+	input_set_drvdata(w->input_dev, w);
+	w->input_dev->name = "Walkera WK-0701 TX";
+	w->input_dev->phys = w->parport->name;
+	w->input_dev->id.bustype = BUS_PARPORT;
+
+	/* TODO what id vendor/product/version ? */
+	w->input_dev->id.vendor = 0x0001;
+	w->input_dev->id.product = 0x0001;
+	w->input_dev->id.version = 0x0100;
+	w->input_dev->open = walkera0701_open;
+	w->input_dev->close = walkera0701_close;
+
+	w->input_dev->evbit[0] = BIT(EV_ABS) | BIT_MASK(EV_KEY);
+	w->input_dev->keybit[BIT_WORD(BTN_GEAR_DOWN)] = BIT_MASK(BTN_GEAR_DOWN);
+
+	input_set_abs_params(w->input_dev, ABS_X, -512, 512, 0, 0);
+	input_set_abs_params(w->input_dev, ABS_Y, -512, 512, 0, 0);
+	input_set_abs_params(w->input_dev, ABS_Z, -512, 512, 0, 0);
+	input_set_abs_params(w->input_dev, ABS_THROTTLE, -512, 512, 0, 0);
+	input_set_abs_params(w->input_dev, ABS_RUDDER, -512, 512, 0, 0);
+	input_set_abs_params(w->input_dev, ABS_MISC, -512, 512, 0, 0);
+
+	err = input_register_device(w->input_dev);
+	if (err)
+		goto init_err3;
+
+	hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	w->timer.function = timer_handler;
+	return 0;
+
+ init_err3:
+	input_free_device(w->input_dev);
+ init_err2:
+	parport_release(w->pardevice);
+ init_err1:
+	parport_unregister_device(w->pardevice);
+ init_err:
+	parport_put_port(w->parport);
+	return err;
+}
+
+static void walkera0701_disconnect(struct walkera_dev *w)
+{
+	hrtimer_cancel(&w->timer);
+	input_unregister_device(w->input_dev);
+	parport_release(w->pardevice);
+	parport_unregister_device(w->pardevice);
+	parport_put_port(w->parport);
+}
+
+static int __init walkera0701_init(void)
+{
+	return walkera0701_connect(&w_dev, walkera0701_pp_no);
+}
+
+static void __exit walkera0701_exit(void)
+{
+	walkera0701_disconnect(&w_dev);
+}
+
+module_init(walkera0701_init);
+module_exit(walkera0701_exit);
-- 
cgit v1.2.3


From e42b6646a8298fe06a33a0f68dab661335f5db6e Mon Sep 17 00:00:00 2001
From: Peter Hutterer <peter.hutterer@who-t.net>
Date: Thu, 20 Nov 2008 15:24:42 -0500
Subject: Input: synaptics - report multi-taps only if supported by the device

According to Section 2.4.4 of the Synaptics TouchPad Interfacing
Guide, bit 2 specifies if multi-finger detection is provided by
the touchpad. Thus, only set BTN_TOOL_DOUBLETAP and
BTN_TOOL_TRIPLETAP if the device actually supports it.

Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/synaptics.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index d349c4a5e3e..865fc69e9bc 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -445,12 +445,14 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 
 	input_report_abs(dev, ABS_TOOL_WIDTH, finger_width);
 	input_report_key(dev, BTN_TOOL_FINGER, num_fingers == 1);
-	input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
-	input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
-
 	input_report_key(dev, BTN_LEFT, hw.left);
 	input_report_key(dev, BTN_RIGHT, hw.right);
 
+	if (SYN_CAP_MULTIFINGER(priv->capabilities)) {
+		input_report_key(dev, BTN_TOOL_DOUBLETAP, num_fingers == 2);
+		input_report_key(dev, BTN_TOOL_TRIPLETAP, num_fingers == 3);
+	}
+
 	if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
 		input_report_key(dev, BTN_MIDDLE, hw.middle);
 
@@ -543,12 +545,14 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	set_bit(EV_KEY, dev->evbit);
 	set_bit(BTN_TOUCH, dev->keybit);
 	set_bit(BTN_TOOL_FINGER, dev->keybit);
-	set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
-	set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
-
 	set_bit(BTN_LEFT, dev->keybit);
 	set_bit(BTN_RIGHT, dev->keybit);
 
+	if (SYN_CAP_MULTIFINGER(priv->capabilities)) {
+		set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
+		set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
+	}
+
 	if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
 		set_bit(BTN_MIDDLE, dev->keybit);
 
-- 
cgit v1.2.3


From 3eb1aa43ef5cb871ba3fb2f08633675eca374d2e Mon Sep 17 00:00:00 2001
From: Jaya Kumar <jayakumar.lkml@gmail.com>
Date: Wed, 19 Nov 2008 16:58:50 -0500
Subject: Input: add support for Wacom W8001 penabled serial touchscreen

The Wacom W8001 sensor is a sensor device (uses electromagnetic
resonance) and it is interfaced via its serial microcontroller
to the host.

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/Kconfig       |  13 ++
 drivers/input/touchscreen/Makefile      |   1 +
 drivers/input/touchscreen/wacom_w8001.c | 325 ++++++++++++++++++++++++++++++++
 3 files changed, 339 insertions(+)
 create mode 100644 drivers/input/touchscreen/wacom_w8001.c

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3d1ab8fa9ac..20eb52ed176 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -95,6 +95,19 @@ config TOUCHSCREEN_ELO
 	  To compile this driver as a module, choose M here: the
 	  module will be called elo.
 
+config TOUCHSCREEN_WACOM_W8001
+	tristate "Wacom W8001 penabled serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wacom_w8001.
+
+
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"
 	select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 15cf2907948..3dc84d3846c 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
+obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
new file mode 100644
index 00000000000..2f33a016764
--- /dev/null
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -0,0 +1,325 @@
+/*
+ * Wacom W8001 penabled serial touchscreen driver
+ *
+ * Copyright (c) 2008 Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout based on Elo serial touchscreen driver by Vojtech Pavlik
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+
+#define DRIVER_DESC	"Wacom W8001 serial touchscreen driver"
+
+MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define W8001_MAX_LENGTH	11
+#define W8001_PACKET_LEN	11
+#define W8001_LEAD_MASK 0x80
+#define W8001_LEAD_BYTE 0x80
+#define W8001_TAB_MASK 0x40
+#define W8001_TAB_BYTE 0x40
+
+#define W8001_QUERY_PACKET 0x20
+
+struct w8001_coord {
+	u8 rdy;
+	u8 tsw;
+	u8 f1;
+	u8 f2;
+	u16 x;
+	u16 y;
+	u16 pen_pressure;
+	u8 tilt_x;
+	u8 tilt_y;
+};
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct w8001 {
+	struct input_dev *dev;
+	struct serio *serio;
+	struct mutex cmd_mutex;
+	struct completion cmd_done;
+	int id;
+	int idx;
+	unsigned char expected_packet;
+	unsigned char data[W8001_MAX_LENGTH];
+	unsigned char response[W8001_PACKET_LEN];
+	char phys[32];
+};
+
+static int parse_data(u8 *data, struct w8001_coord *coord)
+{
+	coord->rdy = data[0] & 0x20;
+	coord->tsw = data[0] & 0x01;
+	coord->f1 = data[0] & 0x02;
+	coord->f2 = data[0] & 0x04;
+
+	coord->x = (data[1] & 0x7F) << 9;
+	coord->x |= (data[2] & 0x7F) << 2;
+	coord->x |= (data[6] & 0x60) >> 5;
+
+	coord->y = (data[3] & 0x7F) << 9;
+	coord->y |= (data[4] & 0x7F) << 2;
+	coord->y |= (data[6] & 0x18) >> 3;
+
+	coord->pen_pressure = data[5] & 0x7F;
+	coord->pen_pressure |= (data[6] & 0x07) << 7 ;
+
+	coord->tilt_x = data[7] & 0x7F;
+	coord->tilt_y = data[8] & 0x7F;
+
+	return 0;
+}
+
+static void w8001_process_data(struct w8001 *w8001, unsigned char data)
+{
+	struct input_dev *dev = w8001->dev;
+	u8 tmp;
+	struct w8001_coord coord;
+
+	w8001->data[w8001->idx] = data;
+	switch (w8001->idx++) {
+	case 0:
+		if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) {
+			pr_debug("w8001: unsynchronized data: 0x%02x\n", data);
+			w8001->idx = 0;
+		}
+		break;
+	case 8:
+		tmp = w8001->data[0] & W8001_TAB_MASK;
+		if (unlikely(tmp == W8001_TAB_BYTE))
+			break;
+		w8001->idx = 0;
+		memset(&coord, 0, sizeof(coord));
+		parse_data(w8001->data, &coord);
+		input_report_abs(dev, ABS_X, coord.x);
+		input_report_abs(dev, ABS_Y, coord.y);
+		input_report_abs(dev, ABS_PRESSURE, coord.pen_pressure);
+		input_report_key(dev, BTN_TOUCH, coord.tsw);
+		input_sync(dev);
+		break;
+	case 10:
+		w8001->idx = 0;
+		memcpy(w8001->response, &w8001->data, W8001_PACKET_LEN);
+		w8001->expected_packet = W8001_QUERY_PACKET;
+		complete(&w8001->cmd_done);
+		break;
+	}
+}
+
+
+static irqreturn_t w8001_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct w8001 *w8001 = serio_get_drvdata(serio);
+
+	w8001_process_data(w8001, data);
+
+	return IRQ_HANDLED;
+}
+
+static int w8001_async_command(struct w8001 *w8001, unsigned char *packet,
+					int len)
+{
+	int rc = -1;
+	int i;
+
+	mutex_lock(&w8001->cmd_mutex);
+
+	for (i = 0; i < len; i++) {
+		if (serio_write(w8001->serio, packet[i]))
+			goto out;
+	}
+	rc = 0;
+
+out:
+	mutex_unlock(&w8001->cmd_mutex);
+	return rc;
+}
+
+static int w8001_command(struct w8001 *w8001, unsigned char *packet, int len)
+{
+	int rc = -1;
+	int i;
+
+	mutex_lock(&w8001->cmd_mutex);
+
+	serio_pause_rx(w8001->serio);
+	init_completion(&w8001->cmd_done);
+	serio_continue_rx(w8001->serio);
+
+	for (i = 0; i < len; i++) {
+		if (serio_write(w8001->serio, packet[i]))
+			goto out;
+	}
+
+	wait_for_completion_timeout(&w8001->cmd_done, HZ);
+
+	if (w8001->expected_packet == W8001_QUERY_PACKET) {
+		/* We are back in reporting mode, the query was ACKed */
+		memcpy(packet, w8001->response, W8001_PACKET_LEN);
+		rc = 0;
+	}
+
+out:
+	mutex_unlock(&w8001->cmd_mutex);
+	return rc;
+}
+
+static int w8001_setup(struct w8001 *w8001)
+{
+	struct w8001_coord coord;
+	struct input_dev *dev = w8001->dev;
+	unsigned char start[1] = { '1' };
+	unsigned char query[11] = { '*' };
+
+	if (w8001_command(w8001, query, 1))
+		return -1;
+
+	memset(&coord, 0, sizeof(coord));
+	parse_data(query, &coord);
+
+	input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+	input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+	input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+	input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+	input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+
+	if (w8001_async_command(w8001, start, 1))
+		return -1;
+
+	return 0;
+}
+
+/*
+ * w8001_disconnect() is the opposite of w8001_connect()
+ */
+
+static void w8001_disconnect(struct serio *serio)
+{
+	struct w8001 *w8001 = serio_get_drvdata(serio);
+
+	input_get_device(w8001->dev);
+	input_unregister_device(w8001->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(w8001->dev);
+	kfree(w8001);
+}
+
+/*
+ * w8001_connect() is the routine that is called when someone adds a
+ * new serio device that supports the w8001 protocol and registers it as
+ * an input device.
+ */
+
+static int w8001_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct w8001 *w8001;
+	struct input_dev *input_dev;
+	int err;
+
+	w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!w8001 || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	w8001->serio = serio;
+	w8001->id = serio->id.id;
+	w8001->dev = input_dev;
+	mutex_init(&w8001->cmd_mutex);
+	init_completion(&w8001->cmd_done);
+	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Wacom W8001 Penabled Serial TouchScreen";
+	input_dev->phys = w8001->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_W8001;
+	input_dev->id.product = w8001->id;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	serio_set_drvdata(serio, w8001);
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	if (w8001_setup(w8001))
+		goto fail3;
+
+	err = input_register_device(w8001->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+fail3:
+	serio_close(serio);
+fail2:
+	serio_set_drvdata(serio, NULL);
+fail1:
+	input_free_device(input_dev);
+	kfree(w8001);
+	return err;
+}
+
+static struct serio_device_id w8001_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_W8001,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, w8001_serio_ids);
+
+static struct serio_driver w8001_drv = {
+	.driver		= {
+		.name	= "w8001",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= w8001_serio_ids,
+	.interrupt	= w8001_interrupt,
+	.connect	= w8001_connect,
+	.disconnect	= w8001_disconnect,
+};
+
+static int __init w8001_init(void)
+{
+	return serio_register_driver(&w8001_drv);
+}
+
+static void __exit w8001_exit(void)
+{
+	serio_unregister_driver(&w8001_drv);
+}
+
+module_init(w8001_init);
+module_exit(w8001_exit);
-- 
cgit v1.2.3


From a2d781fc8d9b16113dd9440107d73c0f21d7cbef Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 19 Nov 2008 17:02:24 -0500
Subject: Input: libps2 - handle 0xfc responses from devices

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/libps2.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index 2b304c22c20..67248c31e19 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -262,9 +262,17 @@ int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data)
 			break;
 
 		case PS2_RET_NAK:
-			ps2dev->nak = 1;
+			ps2dev->flags |= PS2_FLAG_NAK;
+			ps2dev->nak = PS2_RET_NAK;
 			break;
 
+		case PS2_RET_ERR:
+			if (ps2dev->flags & PS2_FLAG_NAK) {
+				ps2dev->flags &= ~PS2_FLAG_NAK;
+				ps2dev->nak = PS2_RET_ERR;
+				break;
+			}
+
 		/*
 		 * Workaround for mice which don't ACK the Get ID command.
 		 * These are valid mouse IDs that we recognize.
@@ -282,8 +290,11 @@ int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data)
 	}
 
 
-	if (!ps2dev->nak && ps2dev->cmdcnt)
-		ps2dev->flags |= PS2_FLAG_CMD | PS2_FLAG_CMD1;
+	if (!ps2dev->nak) {
+		ps2dev->flags &= ~PS2_FLAG_NAK;
+		if (ps2dev->cmdcnt)
+			ps2dev->flags |= PS2_FLAG_CMD | PS2_FLAG_CMD1;
+	}
 
 	ps2dev->flags &= ~PS2_FLAG_ACK;
 	wake_up(&ps2dev->wait);
@@ -329,6 +340,7 @@ void ps2_cmd_aborted(struct ps2dev *ps2dev)
 	if (ps2dev->flags & (PS2_FLAG_ACK | PS2_FLAG_CMD))
 		wake_up(&ps2dev->wait);
 
-	ps2dev->flags = 0;
+	/* reset all flags except last nack */
+	ps2dev->flags &= PS2_FLAG_NAK;
 }
 EXPORT_SYMBOL(ps2_cmd_aborted);
-- 
cgit v1.2.3


From 181f63827a7655e84781fe0494189c1fea52816f Mon Sep 17 00:00:00 2001
From: Rikard Ljungstrand <lrikard@student.chalmers.se>
Date: Fri, 19 Dec 2008 21:59:20 -0500
Subject: Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop

Add quirk for misbehaving volume buttons on HP Pavilion ZV6100 laptop which
are not sending keyrelease events, as reported by Aaron Pickett.

Signed-off-by: Rikard Ljungstrand <lrikard@student.chalmers.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 379b7ff354e..fa6ed339d17 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -883,6 +883,23 @@ static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
 				  atkbd->force_release_mask);
 }
 
+/*
+ * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release
+ * for its volume buttons
+ */
+static void atkbd_hp_zv6100_keymap_fixup(struct atkbd *atkbd)
+{
+	const unsigned int forced_release_keys[] = {
+		0xae, 0xb0,
+	};
+	int i;
+
+	if (atkbd->set == 2)
+		for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+			__set_bit(forced_release_keys[i],
+					atkbd->force_release_mask);
+}
+
 /*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
@@ -1484,6 +1501,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_fixup,
 		.driver_data = atkbd_hp_keymap_fixup,
 	},
+	{
+		.ident = "HP Pavilion ZV6100",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
+		},
+		.callback = atkbd_setup_fixup,
+		.driver_data = atkbd_hp_zv6100_keymap_fixup,
+	},
 	{
 		.ident = "Inventec Symphony",
 		.matches = {
-- 
cgit v1.2.3


From 4200844bd9dc511088258437d564a187f0ffc94e Mon Sep 17 00:00:00 2001
From: Stuart Hopkins <stuart@dodgy-geeza.com>
Date: Sat, 20 Dec 2008 04:12:33 -0500
Subject: Input: atkbd - Samsung NC10 key repeat fix

This patch fixes the key repeat issue with the Fn+F? keys on the new
Samsung NC10 Netbook, so that the keys can be defined and used within
ACPID correctly, otherwise the keys repeat indefinately.

This solves part of http://bugzilla.kernel.org/show_bug.cgi?id=12021

Signed-off-by: Stuart Hopkins <stuart@dodgy-geeza.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index fa6ed339d17..97f709f2a68 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -900,6 +900,22 @@ static void atkbd_hp_zv6100_keymap_fixup(struct atkbd *atkbd)
 					atkbd->force_release_mask);
 }
 
+/*
+ * Samsung NC10 with Fn+F? key release not working
+ */
+static void atkbd_samsung_keymap_fixup(struct atkbd *atkbd)
+{
+	const unsigned int forced_release_keys[] = {
+		0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9,
+	};
+	int i;
+
+	if (atkbd->set == 2)
+		for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+			__set_bit(forced_release_keys[i],
+				  atkbd->force_release_mask);
+}
+
 /*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
@@ -1519,6 +1535,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_fixup,
 		.driver_data = atkbd_inventec_keymap_fixup,
 	},
+	{
+		.ident = "Samsung NC10",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
+		},
+		.callback = atkbd_setup_fixup,
+		.driver_data = atkbd_samsung_keymap_fixup,
+	},
 	{ }
 };
 
-- 
cgit v1.2.3


From a6f66ddf7a8b34bb28e4d1c47531b61c671eac9b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ozan=20=C3=87a=C4=9Flayan?= <ozan@pardus.org.tr>
Date: Sat, 20 Dec 2008 04:04:51 -0500
Subject: Input: i8042 - add Gigabyte M912 netbook to noloop exception table
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Gigabyte M912's touchpad needs i8042.noloop for working.

Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042-x86ia64io.h | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 29e686388a2..e196bf246f3 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -143,6 +143,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "M606"),
 		},
 	},
+	{
+		.ident = "Gigabyte M912",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "M912"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "01"),
+		},
+	},
 	{ }
 };
 
-- 
cgit v1.2.3


From 8bbf2703c4f676e6e5414672dd460f7d2f979ed5 Mon Sep 17 00:00:00 2001
From: Paul Fox <pgf@laptop.org>
Date: Sat, 20 Dec 2008 03:58:11 -0500
Subject: Input: psmouse - add module parameters to control OLPC touchpad
 delays

The HPGK touchpad that is found on the XO driver has historically
exhibitted eratic behaviour in various environments (very dry,
very humid, etc) that can be worked around via some delays. This
patch turns those delays into module parameters to make testing
simpler.

Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Acked-By: Andres Salomon <dilinger@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/hgpk.c | 32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 88f04bf2ad6..81e6ebf323e 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -48,6 +48,30 @@ module_param(recalib_delta, int, 0644);
 MODULE_PARM_DESC(recalib_delta,
 	"packets containing a delta this large will cause a recalibration.");
 
+static int jumpy_delay = 1000;
+module_param(jumpy_delay, int, 0644);
+MODULE_PARM_DESC(jumpy_delay,
+	"delay (ms) before recal after jumpiness detected");
+
+static int spew_delay = 1000;
+module_param(spew_delay, int, 0644);
+MODULE_PARM_DESC(spew_delay,
+	"delay (ms) before recal after packet spew detected");
+
+static int recal_guard_time = 2000;
+module_param(recal_guard_time, int, 0644);
+MODULE_PARM_DESC(recal_guard_time,
+	"interval (ms) during which recal will be restarted if packet received");
+
+static int post_interrupt_delay = 1000;
+module_param(post_interrupt_delay, int, 0644);
+MODULE_PARM_DESC(post_interrupt_delay,
+	"delay (ms) before recal after recal interrupt detected");
+
+static int autorecal = 1;
+module_param(autorecal, int, 0644);
+MODULE_PARM_DESC(autorecal, "enable recalibration in the driver");
+
 /*
  * When the touchpad gets ultra-sensitive, one can keep their finger 1/2"
  * above the pad and still have it send packets.  This causes a jump cursor
@@ -66,7 +90,7 @@ static void hgpk_jumpy_hack(struct psmouse *psmouse, int x, int y)
 		/* My car gets forty rods to the hogshead and that's the
 		 * way I likes it! */
 		psmouse_queue_work(psmouse, &priv->recalib_wq,
-				msecs_to_jiffies(1000));
+				msecs_to_jiffies(jumpy_delay));
 	}
 }
 
@@ -103,7 +127,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
 			hgpk_dbg(psmouse, "packet spew detected (%d,%d)\n",
 				 priv->x_tally, priv->y_tally);
 			psmouse_queue_work(psmouse, &priv->recalib_wq,
-					   msecs_to_jiffies(1000));
+					   msecs_to_jiffies(spew_delay));
 		}
 		/* reset every 100 packets */
 		priv->count = 0;
@@ -181,7 +205,7 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
 				 "packet inside calibration window, "
 				 "queueing another recalibration\n");
 			psmouse_queue_work(psmouse, &priv->recalib_wq,
-					msecs_to_jiffies(1000));
+					msecs_to_jiffies(post_interrupt_delay));
 		}
 		priv->recalib_window = 0;
 	}
@@ -231,7 +255,7 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse)
 	 * If someone's finger *was* on the touchpad, it's probably
 	 * miscalibrated.  So, we should schedule another recalibration
 	 */
-	priv->recalib_window = jiffies +  msecs_to_jiffies(2000);
+	priv->recalib_window = jiffies +  msecs_to_jiffies(recal_guard_time);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 50b6f1f4a430608f7345f66ecd68a129bff11649 Mon Sep 17 00:00:00 2001
From: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Date: Sat, 20 Dec 2008 04:26:01 -0500
Subject: Input: add tsc2007 based touchscreen driver

This drive has been tested on ARM9 based SoC - MV86XX.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/Kconfig   |  11 ++
 drivers/input/touchscreen/Makefile  |   1 +
 drivers/input/touchscreen/tsc2007.c | 381 ++++++++++++++++++++++++++++++++++++
 3 files changed, 393 insertions(+)
 create mode 100644 drivers/input/touchscreen/tsc2007.c

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 20eb52ed176..83747dc9ba0 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -389,4 +389,15 @@ config TOUCHSCREEN_TOUCHIT213
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchit213.
 
+config TOUCHSCREEN_TSC2007
+	tristate "TSC2007 based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a TSC2007 based touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsc2007.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3dc84d3846c..127f87cc2e2 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
new file mode 100644
index 00000000000..b75dc299057
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -0,0 +1,381 @@
+/*
+ * drivers/input/touchscreen/tsc2007.c
+ *
+ * Copyright (c) 2008 MtekVision Co., Ltd.
+ *	Kwangwoo Lee <kwlee@mtekvision.com>
+ *
+ * Using code from:
+ *  - ads7846.c
+ *	Copyright (c) 2005 David Brownell
+ *	Copyright (c) 2006 Nokia Corporation
+ *  - corgi_ts.c
+ *	Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *	Copyright (C) 2002 MontaVista Software
+ *	Copyright (C) 2004 Texas Instruments
+ *	Copyright (C) 2005 Dirk Behme
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/hrtimer.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+
+#define TS_POLL_DELAY	(10 * 1000)	/* ns delay before the first sample */
+#define TS_POLL_PERIOD	(5 * 1000)	/* ns delay between samples */
+
+#define TSC2007_MEASURE_TEMP0		(0x0 << 4)
+#define TSC2007_MEASURE_AUX		(0x2 << 4)
+#define TSC2007_MEASURE_TEMP1		(0x4 << 4)
+#define TSC2007_ACTIVATE_XN		(0x8 << 4)
+#define TSC2007_ACTIVATE_YN		(0x9 << 4)
+#define TSC2007_ACTIVATE_YP_XN		(0xa << 4)
+#define TSC2007_SETUP			(0xb << 4)
+#define TSC2007_MEASURE_X		(0xc << 4)
+#define TSC2007_MEASURE_Y		(0xd << 4)
+#define TSC2007_MEASURE_Z1		(0xe << 4)
+#define TSC2007_MEASURE_Z2		(0xf << 4)
+
+#define TSC2007_POWER_OFF_IRQ_EN	(0x0 << 2)
+#define TSC2007_ADC_ON_IRQ_DIS0		(0x1 << 2)
+#define TSC2007_ADC_OFF_IRQ_EN		(0x2 << 2)
+#define TSC2007_ADC_ON_IRQ_DIS1		(0x3 << 2)
+
+#define TSC2007_12BIT			(0x0 << 1)
+#define TSC2007_8BIT			(0x1 << 1)
+
+#define	MAX_12BIT			((1 << 12) - 1)
+
+#define ADC_ON_12BIT	(TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
+
+#define READ_Y		(ADC_ON_12BIT | TSC2007_MEASURE_Y)
+#define READ_Z1		(ADC_ON_12BIT | TSC2007_MEASURE_Z1)
+#define READ_Z2		(ADC_ON_12BIT | TSC2007_MEASURE_Z2)
+#define READ_X		(ADC_ON_12BIT | TSC2007_MEASURE_X)
+#define PWRDOWN		(TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
+
+struct ts_event {
+	u16	x;
+	u16	y;
+	u16	z1, z2;
+};
+
+struct tsc2007 {
+	struct input_dev	*input;
+	char			phys[32];
+	struct hrtimer		timer;
+	struct ts_event		tc;
+
+	struct i2c_client	*client;
+
+	spinlock_t		lock;
+
+	u16			model;
+	u16			x_plate_ohms;
+
+	unsigned		pendown;
+	int			irq;
+
+	int			(*get_pendown_state)(void);
+	void			(*clear_penirq)(void);
+};
+
+static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
+{
+	s32 data;
+	u16 val;
+
+	data = i2c_smbus_read_word_data(tsc->client, cmd);
+	if (data < 0) {
+		dev_err(&tsc->client->dev, "i2c io error: %d\n", data);
+		return data;
+	}
+
+	/* The protocol and raw data format from i2c interface:
+	 * S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
+	 * Where DataLow has [D11-D4], DataHigh has [D3-D0 << 4 | Dummy 4bit].
+	 */
+	val = swab16(data) >> 4;
+
+	dev_dbg(&tsc->client->dev, "data: 0x%x, val: 0x%x\n", data, val);
+
+	return val;
+}
+
+static void tsc2007_send_event(void *tsc)
+{
+	struct tsc2007	*ts = tsc;
+	u32		rt;
+	u16		x, y, z1, z2;
+
+	x = ts->tc.x;
+	y = ts->tc.y;
+	z1 = ts->tc.z1;
+	z2 = ts->tc.z2;
+
+	/* range filtering */
+	if (x == MAX_12BIT)
+		x = 0;
+
+	if (likely(x && z1)) {
+		/* compute touch pressure resistance using equation #1 */
+		rt = z2;
+		rt -= z1;
+		rt *= x;
+		rt *= ts->x_plate_ohms;
+		rt /= z1;
+		rt = (rt + 2047) >> 12;
+	} else
+		rt = 0;
+
+	/* Sample found inconsistent by debouncing or pressure is beyond
+	 * the maximum. Don't report it to user space, repeat at least
+	 * once more the measurement
+	 */
+	if (rt > MAX_12BIT) {
+		dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
+
+		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
+			      HRTIMER_MODE_REL);
+		return;
+	}
+
+	/* NOTE: We can't rely on the pressure to determine the pen down
+	 * state, even this controller has a pressure sensor.  The pressure
+	 * value can fluctuate for quite a while after lifting the pen and
+	 * in some cases may not even settle at the expected value.
+	 *
+	 * The only safe way to check for the pen up condition is in the
+	 * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
+	 */
+	if (rt) {
+		struct input_dev *input = ts->input;
+
+		if (!ts->pendown) {
+			dev_dbg(&ts->client->dev, "DOWN\n");
+
+			input_report_key(input, BTN_TOUCH, 1);
+			ts->pendown = 1;
+		}
+
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+		input_report_abs(input, ABS_PRESSURE, rt);
+
+		input_sync(input);
+
+		dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n",
+			x, y, rt);
+	}
+
+	hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
+			HRTIMER_MODE_REL);
+}
+
+static int tsc2007_read_values(struct tsc2007 *tsc)
+{
+	/* y- still on; turn on only y+ (and ADC) */
+	tsc->tc.y = tsc2007_xfer(tsc, READ_Y);
+
+	/* turn y- off, x+ on, then leave in lowpower */
+	tsc->tc.x = tsc2007_xfer(tsc, READ_X);
+
+	/* turn y+ off, x- on; we'll use formula #1 */
+	tsc->tc.z1 = tsc2007_xfer(tsc, READ_Z1);
+	tsc->tc.z2 = tsc2007_xfer(tsc, READ_Z2);
+
+	/* power down */
+	tsc2007_xfer(tsc, PWRDOWN);
+
+	return 0;
+}
+
+static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
+{
+	struct tsc2007 *ts = container_of(handle, struct tsc2007, timer);
+
+	spin_lock_irq(&ts->lock);
+
+	if (unlikely(!ts->get_pendown_state() && ts->pendown)) {
+		struct input_dev *input = ts->input;
+
+		dev_dbg(&ts->client->dev, "UP\n");
+
+		input_report_key(input, BTN_TOUCH, 0);
+		input_report_abs(input, ABS_PRESSURE, 0);
+		input_sync(input);
+
+		ts->pendown = 0;
+		enable_irq(ts->irq);
+	} else {
+		/* pen is still down, continue with the measurement */
+		dev_dbg(&ts->client->dev, "pen is still down\n");
+
+		tsc2007_read_values(ts);
+		tsc2007_send_event(ts);
+	}
+
+	spin_unlock_irq(&ts->lock);
+
+	return HRTIMER_NORESTART;
+}
+
+static irqreturn_t tsc2007_irq(int irq, void *handle)
+{
+	struct tsc2007 *ts = handle;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ts->lock, flags);
+
+	if (likely(ts->get_pendown_state())) {
+		disable_irq(ts->irq);
+		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
+					HRTIMER_MODE_REL);
+	}
+
+	if (ts->clear_penirq)
+		ts->clear_penirq();
+
+	spin_unlock_irqrestore(&ts->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int tsc2007_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct tsc2007 *ts;
+	struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data;
+	struct input_dev *input_dev;
+	int err;
+
+	if (!pdata) {
+		dev_err(&client->dev, "platform data is required!\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -EIO;
+
+	ts = kzalloc(sizeof(struct tsc2007), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->client = client;
+	i2c_set_clientdata(client, ts);
+
+	ts->input = input_dev;
+
+	hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	ts->timer.function = tsc2007_timer;
+
+	spin_lock_init(&ts->lock);
+
+	ts->model             = pdata->model;
+	ts->x_plate_ohms      = pdata->x_plate_ohms;
+	ts->get_pendown_state = pdata->get_pendown_state;
+	ts->clear_penirq      = pdata->clear_penirq;
+
+	pdata->init_platform_hw();
+
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", client->dev.bus_id);
+
+	input_dev->name = "TSC2007 Touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = BUS_I2C;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+
+	tsc2007_read_values(ts);
+
+	ts->irq = client->irq;
+
+	err = request_irq(ts->irq, tsc2007_irq, 0,
+			client->dev.driver->name, ts);
+	if (err < 0) {
+		dev_err(&client->dev, "irq %d busy?\n", ts->irq);
+		goto err_free_mem;
+	}
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_free_irq;
+
+	dev_info(&client->dev, "registered with irq (%d)\n", ts->irq);
+
+	return 0;
+
+ err_free_irq:
+	free_irq(ts->irq, ts);
+	hrtimer_cancel(&ts->timer);
+ err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return err;
+}
+
+static int tsc2007_remove(struct i2c_client *client)
+{
+	struct tsc2007	*ts = i2c_get_clientdata(client);
+	struct tsc2007_platform_data *pdata;
+
+	pdata = client->dev.platform_data;
+	pdata->exit_platform_hw();
+
+	free_irq(ts->irq, ts);
+	hrtimer_cancel(&ts->timer);
+	input_unregister_device(ts->input);
+	kfree(ts);
+
+	return 0;
+}
+
+static struct i2c_device_id tsc2007_idtable[] = {
+	{ "tsc2007", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, tsc2007_idtable);
+
+static struct i2c_driver tsc2007_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "tsc2007"
+	},
+	.id_table	= tsc2007_idtable,
+	.probe		= tsc2007_probe,
+	.remove		= tsc2007_remove,
+};
+
+static int __init tsc2007_init(void)
+{
+	return i2c_add_driver(&tsc2007_driver);
+}
+
+static void __exit tsc2007_exit(void)
+{
+	i2c_del_driver(&tsc2007_driver);
+}
+
+module_init(tsc2007_init);
+module_exit(tsc2007_exit);
+
+MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>");
+MODULE_DESCRIPTION("TSC2007 TouchScreen Driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 0de048aba1b751ee19a747dc4c82636579e47b85 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sat, 20 Dec 2008 05:19:43 -0500
Subject: Input: make some variables and functions static

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/gpio_mouse.c | 2 +-
 drivers/input/tablet/wacom_wac.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 72cf5e33790..0db8d16c5ed 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -173,7 +173,7 @@ static int __devexit gpio_mouse_remove(struct platform_device *pdev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:gpio_mouse");
 
-struct platform_driver gpio_mouse_device_driver = {
+static struct platform_driver gpio_mouse_device_driver = {
 	.remove		= __devexit_p(gpio_mouse_remove),
 	.driver		= {
 		.name	= "gpio_mouse",
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 8dc8d1e59be..2638811c61a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -535,7 +535,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 	return 1;
 }
 
-int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+static int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
 {
 	char *data = wacom->data;
 	int prox = 0, pressure;
-- 
cgit v1.2.3


From 3a0c58ddcd4f0edb37d6008db2a33c9756ec916c Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Tue, 23 Dec 2008 04:09:28 -0500
Subject: Input: ads7846 - strict_strtoul takes unsigned long

Fix sparse warning introduced by:
commit 160f1fef7e52e974489b3c70fbd4e094c06965c2 Input: convert drivers to use strict_strtoul()

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/ads7846.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 6017ea6e994..d0004dc44c8 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -472,7 +472,7 @@ static ssize_t ads7846_disable_store(struct device *dev,
 				     const char *buf, size_t count)
 {
 	struct ads7846 *ts = dev_get_drvdata(dev);
-	long i;
+	unsigned long i;
 
 	if (strict_strtoul(buf, 10, &i))
 		return -EINVAL;
-- 
cgit v1.2.3


From 9bcc00b96fc14c0cca94252b19a6e05c7d031f4a Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Tue, 23 Dec 2008 04:21:04 -0500
Subject: Input: add da9034 touchscreen support

Add support for the built-in touchscreen controller in DA9034
(aka Micco), usually found on platforms with xscale processors.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/touchscreen/Kconfig     |   8 +
 drivers/input/touchscreen/Makefile    |   1 +
 drivers/input/touchscreen/da9034-ts.c | 389 ++++++++++++++++++++++++++++++++++
 3 files changed, 398 insertions(+)
 create mode 100644 drivers/input/touchscreen/da9034-ts.c

(limited to 'drivers')

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 83747dc9ba0..bb6486a8c07 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -58,6 +58,14 @@ config TOUCHSCREEN_CORGI
 	  NOTE: this driver is deprecated, try enable SPI and generic
 	  ADS7846-based touchscreen driver.
 
+config TOUCHSCREEN_DA9034
+	tristate "Touchscreen support for Dialog Semiconductor DA9034"
+	depends on PMIC_DA903X
+	default y
+	help
+	  Say Y here to enable the support for the touchscreen found
+	  on Dialog Semiconductor DA9034 PMIC.
+
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 127f87cc2e2..d3375aff46f 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
 obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
+obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
new file mode 100644
index 00000000000..4342e77814b
--- /dev/null
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -0,0 +1,389 @@
+/*
+ * Touchscreen driver for Dialog Semiconductor DA9034
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ *	Fengwei Yin <fengwei.yin@marvell.com>
+ *	Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/da903x.h>
+
+#define DA9034_MANUAL_CTRL	0x50
+#define DA9034_LDO_ADC_EN	(1 << 4)
+
+#define DA9034_AUTO_CTRL1	0x51
+
+#define DA9034_AUTO_CTRL2	0x52
+#define DA9034_AUTO_TSI_EN	(1 << 3)
+#define DA9034_PEN_DETECT	(1 << 4)
+
+#define DA9034_TSI_CTRL1	0x53
+#define DA9034_TSI_CTRL2	0x54
+#define DA9034_TSI_X_MSB	0x6c
+#define DA9034_TSI_Y_MSB	0x6d
+#define DA9034_TSI_XY_LSB	0x6e
+
+enum {
+	STATE_IDLE,	/* wait for pendown */
+	STATE_BUSY,	/* TSI busy sampling */
+	STATE_STOP,	/* sample available */
+	STATE_WAIT,	/* Wait to start next sample */
+};
+
+enum {
+	EVENT_PEN_DOWN,
+	EVENT_PEN_UP,
+	EVENT_TSI_READY,
+	EVENT_TIMEDOUT,
+};
+
+struct da9034_touch {
+	struct device		*da9034_dev;
+	struct input_dev	*input_dev;
+
+	struct delayed_work	tsi_work;
+	struct notifier_block	notifier;
+
+	int	state;
+
+	int	interval_ms;
+	int	x_inverted;
+	int	y_inverted;
+
+	int	last_x;
+	int	last_y;
+};
+
+static inline int is_pen_down(struct da9034_touch *touch)
+{
+	return da903x_query_status(touch->da9034_dev, DA9034_STATUS_PEN_DOWN);
+}
+
+static inline int detect_pen_down(struct da9034_touch *touch, int on)
+{
+	if (on)
+		return da903x_set_bits(touch->da9034_dev,
+				DA9034_AUTO_CTRL2, DA9034_PEN_DETECT);
+	else
+		return da903x_clr_bits(touch->da9034_dev,
+				DA9034_AUTO_CTRL2, DA9034_PEN_DETECT);
+}
+
+static int read_tsi(struct da9034_touch *touch)
+{
+	uint8_t _x, _y, _v;
+	int ret;
+
+	ret = da903x_read(touch->da9034_dev, DA9034_TSI_X_MSB, &_x);
+	if (ret)
+		return ret;
+
+	ret = da903x_read(touch->da9034_dev, DA9034_TSI_Y_MSB, &_y);
+	if (ret)
+		return ret;
+
+	ret = da903x_read(touch->da9034_dev, DA9034_TSI_XY_LSB, &_v);
+	if (ret)
+		return ret;
+
+	touch->last_x = ((_x << 2) & 0x3fc) | (_v & 0x3);
+	touch->last_y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2);
+
+	return 0;
+}
+
+static inline int start_tsi(struct da9034_touch *touch)
+{
+	return da903x_set_bits(touch->da9034_dev,
+			DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN);
+}
+
+static inline int stop_tsi(struct da9034_touch *touch)
+{
+	return da903x_clr_bits(touch->da9034_dev,
+			DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN);
+}
+
+static inline void report_pen_down(struct da9034_touch *touch)
+{
+	int x = touch->last_x;
+	int y = touch->last_y;
+
+	x &= 0xfff;
+	if (touch->x_inverted)
+		x = 1024 - x;
+	y &= 0xfff;
+	if (touch->y_inverted)
+		y = 1024 - y;
+
+	input_report_abs(touch->input_dev, ABS_X, x);
+	input_report_abs(touch->input_dev, ABS_Y, y);
+	input_report_key(touch->input_dev, BTN_TOUCH, 1);
+
+	input_sync(touch->input_dev);
+}
+
+static inline void report_pen_up(struct da9034_touch *touch)
+{
+	input_report_key(touch->input_dev, BTN_TOUCH, 0);
+	input_sync(touch->input_dev);
+}
+
+static void da9034_event_handler(struct da9034_touch *touch, int event)
+{
+	int err;
+
+	switch (touch->state) {
+	case STATE_IDLE:
+		if (event != EVENT_PEN_DOWN)
+			break;
+
+		/* Enable auto measurement of the TSI, this will
+		 * automatically disable pen down detection
+		 */
+		err = start_tsi(touch);
+		if (err)
+			goto err_reset;
+
+		touch->state = STATE_BUSY;
+		break;
+
+	case STATE_BUSY:
+		if (event != EVENT_TSI_READY)
+			break;
+
+		err = read_tsi(touch);
+		if (err)
+			goto err_reset;
+
+		/* Disable auto measurement of the TSI, so that
+		 * pen down status will be available
+		 */
+		err = stop_tsi(touch);
+		if (err)
+			goto err_reset;
+
+		touch->state = STATE_STOP;
+		break;
+
+	case STATE_STOP:
+		if (event == EVENT_PEN_DOWN) {
+			report_pen_down(touch);
+			schedule_delayed_work(&touch->tsi_work,
+				msecs_to_jiffies(touch->interval_ms));
+			touch->state = STATE_WAIT;
+		}
+
+		if (event == EVENT_PEN_UP) {
+			report_pen_up(touch);
+			touch->state = STATE_IDLE;
+		}
+
+		input_sync(touch->input_dev);
+		break;
+
+	case STATE_WAIT:
+		if (event != EVENT_TIMEDOUT)
+			break;
+
+		if (is_pen_down(touch)) {
+			start_tsi(touch);
+			touch->state = STATE_BUSY;
+		} else
+			touch->state = STATE_IDLE;
+		break;
+	}
+	return;
+
+err_reset:
+	touch->state = STATE_IDLE;
+	stop_tsi(touch);
+	detect_pen_down(touch, 1);
+}
+
+static void da9034_tsi_work(struct work_struct *work)
+{
+	struct da9034_touch *touch =
+		container_of(work, struct da9034_touch, tsi_work.work);
+
+	da9034_event_handler(touch, EVENT_TIMEDOUT);
+}
+
+static int da9034_touch_notifier(struct notifier_block *nb,
+				 unsigned long event, void *data)
+{
+	struct da9034_touch *touch =
+		container_of(nb, struct da9034_touch, notifier);
+
+	if (event & DA9034_EVENT_PEN_DOWN) {
+		if (is_pen_down(touch))
+			da9034_event_handler(touch, EVENT_PEN_DOWN);
+		else
+			da9034_event_handler(touch, EVENT_PEN_UP);
+	}
+
+	if (event & DA9034_EVENT_TSI_READY)
+		da9034_event_handler(touch, EVENT_TSI_READY);
+
+	return 0;
+}
+
+static int da9034_touch_open(struct input_dev *dev)
+{
+	struct da9034_touch *touch = input_get_drvdata(dev);
+	int ret;
+
+	ret = da903x_register_notifier(touch->da9034_dev, &touch->notifier,
+			DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY);
+	if (ret)
+		return -EBUSY;
+
+	/* Enable ADC LDO */
+	ret = da903x_set_bits(touch->da9034_dev,
+			DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN);
+	if (ret)
+		return ret;
+
+	/* TSI_DELAY: 3 slots, TSI_SKIP: 3 slots */
+	ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL1, 0x1b);
+	if (ret)
+		return ret;
+
+	ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL2, 0x00);
+	if (ret)
+		return ret;
+
+	touch->state = STATE_IDLE;
+	detect_pen_down(touch, 1);
+
+	return 0;
+}
+
+static void da9034_touch_close(struct input_dev *dev)
+{
+	struct da9034_touch *touch = input_get_drvdata(dev);
+
+	da903x_unregister_notifier(touch->da9034_dev, &touch->notifier,
+			DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY);
+
+	cancel_delayed_work_sync(&touch->tsi_work);
+
+	touch->state = STATE_IDLE;
+	stop_tsi(touch);
+	detect_pen_down(touch, 0);
+
+	/* Disable ADC LDO */
+	da903x_clr_bits(touch->da9034_dev,
+			DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN);
+}
+
+
+static int __devinit da9034_touch_probe(struct platform_device *pdev)
+{
+	struct da9034_touch_pdata *pdata = pdev->dev.platform_data;
+	struct da9034_touch *touch;
+	struct input_dev *input_dev;
+	int ret;
+
+	touch = kzalloc(sizeof(struct da9034_touch), GFP_KERNEL);
+	if (touch == NULL) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	touch->da9034_dev = pdev->dev.parent;
+
+	if (pdata) {
+		touch->interval_ms	= pdata->interval_ms;
+		touch->x_inverted	= pdata->x_inverted;
+		touch->y_inverted	= pdata->y_inverted;
+	} else
+		/* fallback into default */
+		touch->interval_ms	= 10;
+
+	INIT_DELAYED_WORK(&touch->tsi_work, da9034_tsi_work);
+	touch->notifier.notifier_call = da9034_touch_notifier;
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		ret = -ENOMEM;
+		goto err_free_touch;
+	}
+
+	input_dev->name		= pdev->name;
+	input_dev->open		= da9034_touch_open;
+	input_dev->close	= da9034_touch_close;
+	input_dev->dev.parent	= &pdev->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(ABS_X, input_dev->absbit);
+	__set_bit(ABS_Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	touch->input_dev = input_dev;
+	input_set_drvdata(input_dev, touch);
+
+	ret = input_register_device(input_dev);
+	if (ret)
+		goto err_free_input;
+
+	platform_set_drvdata(pdev, touch);
+	return 0;
+
+err_free_input:
+	input_free_device(input_dev);
+err_free_touch:
+	kfree(touch);
+	return ret;
+}
+
+static int __devexit da9034_touch_remove(struct platform_device *pdev)
+{
+	struct da9034_touch *touch = platform_get_drvdata(pdev);
+
+	input_unregister_device(touch->input_dev);
+	kfree(touch);
+
+	return 0;
+}
+
+static struct platform_driver da9034_touch_driver = {
+	.driver	= {
+		.name	= "da9034-touch",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= da9034_touch_probe,
+	.remove		= __devexit_p(da9034_touch_remove),
+};
+
+static int __init da9034_touch_init(void)
+{
+	return platform_driver_register(&da9034_touch_driver);
+}
+module_init(da9034_touch_init);
+
+static void __exit da9034_touch_exit(void)
+{
+	platform_driver_unregister(&da9034_touch_driver);
+}
+module_exit(da9034_touch_exit);
+
+MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9034-touch");
-- 
cgit v1.2.3


From 105ca2398f89d141b87542d3dd58df90bc539275 Mon Sep 17 00:00:00 2001
From: Yong Yao <yaoyong@marvell.com>
Date: Mon, 29 Dec 2008 03:59:59 -0800
Subject: Input: add support for trackball on pxa930 and pxa935

Signed-off-by: Yong Yao <yaoyong@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/Kconfig          |   6 +
 drivers/input/mouse/Makefile         |  27 ++--
 drivers/input/mouse/pxa930_trkball.c | 269 +++++++++++++++++++++++++++++++++++
 3 files changed, 289 insertions(+), 13 deletions(-)
 create mode 100644 drivers/input/mouse/pxa930_trkball.c

(limited to 'drivers')

diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 4e993425977..093c8c1bca7 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -286,4 +286,10 @@ config MOUSE_GPIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio_mouse.
 
+config MOUSE_PXA930_TRKBALL
+	tristate "PXA930 Trackball mouse"
+	depends on CPU_PXA930 || CPU_PXA935
+	help
+	  Say Y here to support PXA930 Trackball mouse.
+
 endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 96f1dd8037f..8c8a1f236e2 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -4,19 +4,20 @@
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_MOUSE_AMIGA)	+= amimouse.o
-obj-$(CONFIG_MOUSE_APPLETOUCH)	+= appletouch.o
-obj-$(CONFIG_MOUSE_BCM5974)	+= bcm5974.o
-obj-$(CONFIG_MOUSE_ATARI)	+= atarimouse.o
-obj-$(CONFIG_MOUSE_RISCPC)	+= rpcmouse.o
-obj-$(CONFIG_MOUSE_INPORT)	+= inport.o
-obj-$(CONFIG_MOUSE_LOGIBM)	+= logibm.o
-obj-$(CONFIG_MOUSE_PC110PAD)	+= pc110pad.o
-obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
-obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
-obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
-obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
-obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
+obj-$(CONFIG_MOUSE_AMIGA)		+= amimouse.o
+obj-$(CONFIG_MOUSE_APPLETOUCH)		+= appletouch.o
+obj-$(CONFIG_MOUSE_BCM5974)		+= bcm5974.o
+obj-$(CONFIG_MOUSE_ATARI)		+= atarimouse.o
+obj-$(CONFIG_MOUSE_RISCPC)		+= rpcmouse.o
+obj-$(CONFIG_MOUSE_INPORT)		+= inport.o
+obj-$(CONFIG_MOUSE_LOGIBM)		+= logibm.o
+obj-$(CONFIG_MOUSE_PC110PAD)		+= pc110pad.o
+obj-$(CONFIG_MOUSE_PS2)			+= psmouse.o
+obj-$(CONFIG_MOUSE_PXA930_TRKBALL)	+= pxa930_trkball.o
+obj-$(CONFIG_MOUSE_SERIAL)		+= sermouse.o
+obj-$(CONFIG_MOUSE_HIL)			+= hil_ptr.o
+obj-$(CONFIG_MOUSE_VSXXXAA)		+= vsxxxaa.o
+obj-$(CONFIG_MOUSE_GPIO)		+= gpio_mouse.o
 
 psmouse-objs := psmouse-base.o synaptics.o
 
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
new file mode 100644
index 00000000000..a0f45c4fc19
--- /dev/null
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -0,0 +1,269 @@
+/*
+ * PXA930 track ball mouse driver
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2008-02-28: Yong Yao <yaoyong@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/version.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa930_trkball.h>
+
+/* Trackball Controller Register Definitions */
+#define TBCR		(0x000C)
+#define TBCNTR		(0x0010)
+#define TBSBC		(0x0014)
+
+#define TBCR_TBRST	(1 << 1)
+#define TBCR_TBSB	(1 << 10)
+
+#define TBCR_Y_FLT(n)	(((n) & 0xf) << 6)
+#define TBCR_X_FLT(n)	(((n) & 0xf) << 2)
+
+#define TBCNTR_YM(n)	(((n) >> 24) & 0xff)
+#define TBCNTR_YP(n)	(((n) >> 16) & 0xff)
+#define TBCNTR_XM(n)	(((n) >> 8) & 0xff)
+#define TBCNTR_XP(n)	((n) & 0xff)
+
+#define TBSBC_TBSBC	(0x1)
+
+struct pxa930_trkball {
+	struct pxa930_trkball_platform_data *pdata;
+
+	/* Memory Mapped Register */
+	struct resource *mem;
+	void __iomem *mmio_base;
+
+	struct input_dev *input;
+};
+
+static irqreturn_t pxa930_trkball_interrupt(int irq, void *dev_id)
+{
+	struct pxa930_trkball *trkball = dev_id;
+	struct input_dev *input = trkball->input;
+	int tbcntr, x, y;
+
+	/* According to the spec software must read TBCNTR twice:
+	 * if the read value is the same, the reading is valid
+	 */
+	tbcntr = __raw_readl(trkball->mmio_base + TBCNTR);
+
+	if (tbcntr == __raw_readl(trkball->mmio_base + TBCNTR)) {
+		x = (TBCNTR_XP(tbcntr) - TBCNTR_XM(tbcntr)) / 2;
+		y = (TBCNTR_YP(tbcntr) - TBCNTR_YM(tbcntr)) / 2;
+
+		input_report_rel(input, REL_X, x);
+		input_report_rel(input, REL_Y, y);
+		input_sync(input);
+	}
+
+	__raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC);
+	__raw_writel(0, trkball->mmio_base + TBSBC);
+
+	return IRQ_HANDLED;
+}
+
+/* For TBCR, we need to wait for a while to make sure it has been modified. */
+static int write_tbcr(struct pxa930_trkball *trkball, int v)
+{
+	int i = 100;
+
+	__raw_writel(v, trkball->mmio_base + TBCR);
+
+	while (i--) {
+		if (__raw_readl(trkball->mmio_base + TBCR) == v)
+			break;
+		msleep(1);
+	}
+
+	if (i == 0) {
+		pr_err("%s: timed out writing TBCR(%x)!\n", __func__, v);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void pxa930_trkball_config(struct pxa930_trkball *trkball)
+{
+	uint32_t tbcr;
+
+	/* According to spec, need to write the filters of x,y to 0xf first! */
+	tbcr = __raw_readl(trkball->mmio_base + TBCR);
+	write_tbcr(trkball, tbcr | TBCR_X_FLT(0xf) | TBCR_Y_FLT(0xf));
+	write_tbcr(trkball, TBCR_X_FLT(trkball->pdata->x_filter) |
+			    TBCR_Y_FLT(trkball->pdata->y_filter));
+
+	/* According to spec, set TBCR_TBRST first, before clearing it! */
+	tbcr = __raw_readl(trkball->mmio_base + TBCR);
+	write_tbcr(trkball, tbcr | TBCR_TBRST);
+	write_tbcr(trkball, tbcr & ~TBCR_TBRST);
+
+	__raw_writel(TBSBC_TBSBC, trkball->mmio_base + TBSBC);
+	__raw_writel(0, trkball->mmio_base + TBSBC);
+
+	pr_debug("%s: final TBCR=%x!\n", __func__,
+		 __raw_readl(trkball->mmio_base + TBCR));
+}
+
+static int pxa930_trkball_open(struct input_dev *dev)
+{
+	struct pxa930_trkball *trkball = input_get_drvdata(dev);
+
+	pxa930_trkball_config(trkball);
+
+	return 0;
+}
+
+static void pxa930_trkball_disable(struct pxa930_trkball *trkball)
+{
+	uint32_t tbcr = __raw_readl(trkball->mmio_base + TBCR);
+
+	/* Held in reset, gate the 32-KHz input clock off */
+	write_tbcr(trkball, tbcr | TBCR_TBRST);
+}
+
+static void pxa930_trkball_close(struct input_dev *dev)
+{
+	struct pxa930_trkball *trkball = input_get_drvdata(dev);
+
+	pxa930_trkball_disable(trkball);
+}
+
+static int __devinit pxa930_trkball_probe(struct platform_device *pdev)
+{
+	struct pxa930_trkball *trkball;
+	struct input_dev *input;
+	struct resource *res;
+	int irq, error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get trkball irq\n");
+		return -ENXIO;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get register memory\n");
+		return -ENXIO;
+	}
+
+	trkball = kzalloc(sizeof(struct pxa930_trkball), GFP_KERNEL);
+	if (!trkball)
+		return -ENOMEM;
+
+	trkball->pdata = pdev->dev.platform_data;
+	if (!trkball->pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		error = -EINVAL;
+		goto failed;
+	}
+
+	trkball->mmio_base = ioremap_nocache(res->start, resource_size(res));
+	if (!trkball->mmio_base) {
+		dev_err(&pdev->dev, "failed to ioremap registers\n");
+		error = -ENXIO;
+		goto failed;
+	}
+
+	/* held the module in reset, will be enabled in open() */
+	pxa930_trkball_disable(trkball);
+
+	error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED,
+			    pdev->name, trkball);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request irq: %d\n", ret);
+		goto failed_free_io;
+	}
+
+	platform_set_drvdata(pdev, trkball);
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		error = -ENOMEM;
+		goto failed_free_irq;
+	}
+
+	input->name = pdev->name;
+	input->id.bustype = BUS_HOST;
+	input->open = pxa930_trkball_open;
+	input->close = pxa930_trkball_close;
+	input->dev.parent = &pdev->dev;
+	input_set_drvdata(input, trkball);
+
+	trkball->input = input;
+
+	input_set_capability(input, EV_REL, REL_X);
+	input_set_capability(input, EV_REL, REL_Y);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "unable to register input device\n");
+		goto failed_free_input;
+	}
+
+	return 0;
+
+failed_free_input:
+	input_free_device(input);
+failed_free_irq:
+	free_irq(irq, trkball);
+failed_free_io:
+	iounmap(trkball->mmio_base);
+failed:
+	kfree(trkball);
+	return ret;
+}
+
+static int __devexit pxa930_trkball_remove(struct platform_device *pdev)
+{
+	struct pxa930_trkball *trkball = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	input_unregister_device(trkball->input);
+	free_irq(irq, trkball);
+	iounmap(trkball->mmio_base);
+	kfree(trkball);
+
+	return 0;
+}
+
+static struct platform_driver pxa930_trkball_driver = {
+	.driver		= {
+		.name	= "pxa930-trkball",
+	},
+	.probe		= pxa930_trkball_probe,
+	.remove		= __devexit_p(pxa930_trkball_remove),
+};
+
+static int __init pxa930_trkball_init(void)
+{
+	return platform_driver_register(&pxa930_trkball_driver);
+}
+
+static void __exit pxa930_trkball_exit(void)
+{
+	platform_driver_unregister(&pxa930_trkball_driver);
+}
+
+module_init(pxa930_trkball_init);
+module_exit(pxa930_trkball_exit);
+
+MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>");
+MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From e0ee629878d91da998fc26e8fa8b977177f70f39 Mon Sep 17 00:00:00 2001
From: Yong Yao <yaoyong@marvell.com>
Date: Mon, 29 Dec 2008 04:00:02 -0800
Subject: Input: add support for enhanced rotary controller on pxa930 and
 pxa935

Signed-off-by: Yong Yao <yaoyong@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/Kconfig         |   9 ++
 drivers/input/keyboard/Makefile        |   1 +
 drivers/input/keyboard/pxa930_rotary.c | 212 +++++++++++++++++++++++++++++++++
 3 files changed, 222 insertions(+)
 create mode 100644 drivers/input/keyboard/pxa930_rotary.c

(limited to 'drivers')

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index efd70a97459..35561689ff3 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -268,6 +268,15 @@ config KEYBOARD_PXA27x
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa27x_keypad.
 
+config KEYBOARD_PXA930_ROTARY
+	tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
+	depends on CPU_PXA930 || CPU_PXA935
+	help
+	  Enable support for PXA930/PXA935 Enhanced Rotary Controller.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pxa930_rotary.
+
 config KEYBOARD_AAED2000
 	tristate "AAED-2000 keyboard"
 	depends on MACH_AAED2000
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 0edc8f285d1..36351e1190f 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
+obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c
new file mode 100644
index 00000000000..95fbba470e6
--- /dev/null
+++ b/drivers/input/keyboard/pxa930_rotary.c
@@ -0,0 +1,212 @@
+/*
+ * Driver for the enhanced rotary controller on pxa930 and pxa935
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/pxa930_rotary.h>
+
+#define SBCR	(0x04)
+#define ERCR	(0x0c)
+
+#define SBCR_ERSB	(1 << 5)
+
+struct pxa930_rotary {
+	struct input_dev	*input_dev;
+	void __iomem		*mmio_base;
+	int			last_ercr;
+
+	struct pxa930_rotary_platform_data *pdata;
+};
+
+static void clear_sbcr(struct pxa930_rotary *r)
+{
+	uint32_t sbcr = __raw_readl(r->mmio_base + SBCR);
+
+	__raw_writel(sbcr | SBCR_ERSB, r->mmio_base + SBCR);
+	__raw_writel(sbcr & ~SBCR_ERSB, r->mmio_base + SBCR);
+}
+
+static irqreturn_t rotary_irq(int irq, void *dev_id)
+{
+	struct pxa930_rotary *r = dev_id;
+	struct pxa930_rotary_platform_data *pdata = r->pdata;
+	int ercr, delta, key;
+
+	ercr = __raw_readl(r->mmio_base + ERCR) & 0xf;
+	clear_sbcr(r);
+
+	delta = ercr - r->last_ercr;
+	if (delta == 0)
+		return IRQ_HANDLED;
+
+	r->last_ercr = ercr;
+
+	if (pdata->up_key && pdata->down_key) {
+		key = (delta > 0) ? pdata->up_key : pdata->down_key;
+		input_report_key(r->input_dev, key, 1);
+		input_sync(r->input_dev);
+		input_report_key(r->input_dev, key, 0);
+	} else
+		input_report_rel(r->input_dev, pdata->rel_code, delta);
+
+	input_sync(r->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int pxa930_rotary_open(struct input_dev *dev)
+{
+	struct pxa930_rotary *r = input_get_drvdata(dev);
+
+	clear_sbcr(r);
+
+	return 0;
+}
+
+static void pxa930_rotary_close(struct input_dev *dev)
+{
+	struct pxa930_rotary *r = input_get_drvdata(dev);
+
+	clear_sbcr(r);
+}
+
+static int __devinit pxa930_rotary_probe(struct platform_device *pdev)
+{
+	struct pxa930_rotary_platform_data *pdata = pdev->dev.platform_data;
+	struct pxa930_rotary *r;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int err;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq for rotary controller\n");
+		return -ENXIO;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no I/O memory defined\n");
+		return -ENXIO;
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	r = kzalloc(sizeof(struct pxa930_rotary), GFP_KERNEL);
+	if (!r)
+		return -ENOMEM;
+
+	r->mmio_base = ioremap_nocache(res->start, resource_size(res));
+	if (r->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to remap IO memory\n");
+		err = -ENXIO;
+		goto failed_free;
+	}
+
+	r->pdata = pdata;
+	platform_set_drvdata(pdev, r);
+
+	/* allocate and register the input device */
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		err = -ENOMEM;
+		goto failed_free_io;
+	}
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->open = pxa930_rotary_open;
+	input_dev->close = pxa930_rotary_close;
+	input_dev->dev.parent = &pdev->dev;
+
+	if (pdata->up_key && pdata->down_key) {
+		__set_bit(pdata->up_key, input_dev->keybit);
+		__set_bit(pdata->down_key, input_dev->keybit);
+		__set_bit(EV_KEY, input_dev->evbit);
+	} else {
+		__set_bit(pdata->rel_code, input_dev->relbit);
+		__set_bit(EV_REL, input_dev->evbit);
+	}
+
+	r->input_dev = input_dev;
+	input_set_drvdata(input_dev, r);
+
+	err = request_irq(irq, rotary_irq, IRQF_DISABLED,
+			"enhanced rotary", r);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		goto failed_free_input;
+	}
+
+	err = input_register_device(input_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto failed_free_irq;
+	}
+
+	return 0;
+
+failed_free_irq:
+	free_irq(irq, r);
+failed_free_input:
+	input_free_device(input_dev);
+failed_free_io:
+	iounmap(r->mmio_base);
+failed_free:
+	kfree(r);
+	return err;
+}
+
+static int __devexit pxa930_rotary_remove(struct platform_device *pdev)
+{
+	struct pxa930_rotary *r = platform_get_drvdata(pdev);
+
+	free_irq(platform_get_irq(pdev, 0), r);
+	input_unregister_device(r->input_dev);
+	iounmap(r->mmio_base);
+	platform_set_drvdata(pdev, NULL);
+	kfree(r);
+
+	return 0;
+}
+
+static struct platform_driver pxa930_rotary_driver = {
+	.driver		= {
+		.name	= "pxa930-rotary",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= pxa930_rotary_probe,
+	.remove		= __devexit_p(pxa930_rotary_remove),
+};
+
+static int __init pxa930_rotary_init(void)
+{
+	return platform_driver_register(&pxa930_rotary_driver);
+}
+module_init(pxa930_rotary_init);
+
+static void __exit pxa930_rotary_exit(void)
+{
+	platform_driver_unregister(&pxa930_rotary_driver);
+}
+module_exit(pxa930_rotary_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for PXA93x Enhanced Rotary Controller");
+MODULE_AUTHOR("Yao Yong <yaoyong@marvell.com>");
-- 
cgit v1.2.3


From c10a93a0a36b245ce48493f134b9e243a8bfddd1 Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Mon, 29 Dec 2008 04:44:44 -0800
Subject: Input: HIL drivers - add MODULE_ALIAS()

Add MODULE_ALIAS() to the HIL keyboard (hil_kbd.c) and HIL mouse
(hil_ptr.c) drivers to make kernel module autoloader functional.
Report HIL port number ID in serio id.id field.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/hil_kbd.c | 1 +
 drivers/input/mouse/hil_ptr.c    | 2 +-
 drivers/input/serio/hil_mlc.c    | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 71c1971abf8..6f356705ee3 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -47,6 +47,7 @@
 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
 MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver");
 MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("serio:ty03pr25id00ex*");
 
 #define HIL_KBD_MAX_LENGTH 16
 
diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c
index e532c48410e..3263ce083bf 100644
--- a/drivers/input/mouse/hil_ptr.c
+++ b/drivers/input/mouse/hil_ptr.c
@@ -46,7 +46,7 @@
 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
 MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver");
 MODULE_LICENSE("Dual BSD/GPL");
-
+MODULE_ALIAS("serio:ty03pr25id0Fex*");
 
 #define TABLET_SIMULATES_MOUSE	/* allow tablet to be used as mouse */
 #undef  TABLET_AUTOADJUST	/* auto-adjust valid tablet ranges */
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index 37586a68d34..7ba9f2b2c04 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -934,6 +934,7 @@ int hil_mlc_register(hil_mlc *mlc)
 		snprintf(mlc_serio->name, sizeof(mlc_serio->name)-1, "HIL_SERIO%d", i);
 		snprintf(mlc_serio->phys, sizeof(mlc_serio->phys)-1, "HIL%d", i);
 		mlc_serio->id			= hil_mlc_serio_id;
+		mlc_serio->id.id		= i; /* HIL port no. */
 		mlc_serio->write		= hil_mlc_serio_write;
 		mlc_serio->open			= hil_mlc_serio_open;
 		mlc_serio->close		= hil_mlc_serio_close;
-- 
cgit v1.2.3


From 2a3ec3265741c3b2a7ebbd1b33f538e5a5583c48 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Tue, 30 Dec 2008 00:43:11 -0800
Subject: Input: atkbd - broaden the Dell DMI signatures

Some Dells need the dell input quirk applied but have a different vendor
string in their DMI tables. Add an extra entry to cover these machines as
well.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/atkbd.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 97f709f2a68..f6e9f39a527 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1508,6 +1508,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_fixup,
 		.driver_data = atkbd_dell_laptop_keymap_fixup,
 	},
+	{
+		.ident = "Dell Laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
+		},
+		.callback = atkbd_setup_fixup,
+		.driver_data = atkbd_dell_laptop_keymap_fixup,
+	},
 	{
 		.ident = "HP 2133",
 		.matches = {
-- 
cgit v1.2.3


From 01461d7e65a6e3f92fd73ce4651e5f78a0a5990c Mon Sep 17 00:00:00 2001
From: Adrian McMenamin <adrian@newgolddream.dyndns.info>
Date: Tue, 30 Dec 2008 00:53:54 -0800
Subject: Input: add support for Maple controller as a joystick

Add support for the SEGA Dreamcast Maple controller as a joystick

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/joystick/Kconfig        |  12 +++
 drivers/input/joystick/Makefile       |   1 +
 drivers/input/joystick/maplecontrol.c | 193 ++++++++++++++++++++++++++++++++++
 3 files changed, 206 insertions(+)
 create mode 100644 drivers/input/joystick/maplecontrol.c

(limited to 'drivers')

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 268dd3fef0a..b11419590cf 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -306,4 +306,16 @@ config JOYSTICK_WALKERA0701
 	  To compile this driver as a module, choose M here: the
 	  module will be called walkera0701.
 
+config JOYSTICK_MAPLE
+	tristate "Dreamcast control pad"
+	depends on MAPLE
+	help
+	  Say Y here if you have a SEGA Dreamcast and want to use your
+	  controller as a joystick.
+
+	  Most Dreamcast users will say Y.
+
+	  To compile this as a module choose M here: the module will be called
+	  maplecontrol.
+
 endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 72303629568..f3a8cbe2abb 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_JOYSTICK_IFORCE)		+= iforce/
 obj-$(CONFIG_JOYSTICK_INTERACT)		+= interact.o
 obj-$(CONFIG_JOYSTICK_JOYDUMP)		+= joydump.o
 obj-$(CONFIG_JOYSTICK_MAGELLAN)		+= magellan.o
+obj-$(CONFIG_JOYSTICK_MAPLE)		+= maplecontrol.o
 obj-$(CONFIG_JOYSTICK_SIDEWINDER)	+= sidewinder.o
 obj-$(CONFIG_JOYSTICK_SPACEBALL)	+= spaceball.o
 obj-$(CONFIG_JOYSTICK_SPACEORB)		+= spaceorb.o
diff --git a/drivers/input/joystick/maplecontrol.c b/drivers/input/joystick/maplecontrol.c
new file mode 100644
index 00000000000..e50047bfe93
--- /dev/null
+++ b/drivers/input/joystick/maplecontrol.c
@@ -0,0 +1,193 @@
+/*
+ *	SEGA Dreamcast controller driver
+ *	Based on drivers/usb/iforce.c
+ *
+ *	Copyright Yaegashi Takeshi, 2001
+ *	Adrian McMenamin, 2008
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/maple.h>
+
+MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
+MODULE_DESCRIPTION("SEGA Dreamcast controller driver");
+MODULE_LICENSE("GPL");
+
+struct dc_pad {
+	struct input_dev *dev;
+	struct maple_device *mdev;
+};
+
+static void dc_pad_callback(struct mapleq *mq)
+{
+	unsigned short buttons;
+	struct maple_device *mapledev = mq->dev;
+	struct dc_pad *pad = maple_get_drvdata(mapledev);
+	struct input_dev *dev = pad->dev;
+	unsigned char *res = mq->recvbuf;
+
+	buttons = ~le16_to_cpup((__le16 *)(res + 8));
+
+	input_report_abs(dev, ABS_HAT0Y,
+		(buttons & 0x0010 ? -1 : 0) + (buttons & 0x0020 ? 1 : 0));
+	input_report_abs(dev, ABS_HAT0X,
+		(buttons & 0x0040 ? -1 : 0) + (buttons & 0x0080 ? 1 : 0));
+	input_report_abs(dev, ABS_HAT1Y,
+		(buttons & 0x1000 ? -1 : 0) + (buttons & 0x2000 ? 1 : 0));
+	input_report_abs(dev, ABS_HAT1X,
+		(buttons & 0x4000 ? -1 : 0) + (buttons & 0x8000 ? 1 : 0));
+
+	input_report_key(dev, BTN_C,      buttons & 0x0001);
+	input_report_key(dev, BTN_B,      buttons & 0x0002);
+	input_report_key(dev, BTN_A,      buttons & 0x0004);
+	input_report_key(dev, BTN_START,  buttons & 0x0008);
+	input_report_key(dev, BTN_Z,      buttons & 0x0100);
+	input_report_key(dev, BTN_Y,      buttons & 0x0200);
+	input_report_key(dev, BTN_X,      buttons & 0x0400);
+	input_report_key(dev, BTN_SELECT, buttons & 0x0800);
+
+	input_report_abs(dev, ABS_GAS,    res[10]);
+	input_report_abs(dev, ABS_BRAKE,  res[11]);
+	input_report_abs(dev, ABS_X,      res[12]);
+	input_report_abs(dev, ABS_Y,      res[13]);
+	input_report_abs(dev, ABS_RX,     res[14]);
+	input_report_abs(dev, ABS_RY,     res[15]);
+}
+
+static int dc_pad_open(struct input_dev *dev)
+{
+	struct dc_pad *pad = dev->dev.platform_data;
+
+	maple_getcond_callback(pad->mdev, dc_pad_callback, HZ/20,
+		MAPLE_FUNC_CONTROLLER);
+
+	return 0;
+}
+
+static void dc_pad_close(struct input_dev *dev)
+{
+	struct dc_pad *pad = dev->dev.platform_data;
+
+	maple_getcond_callback(pad->mdev, dc_pad_callback, 0,
+		MAPLE_FUNC_CONTROLLER);
+}
+
+/* allow the controller to be used */
+static int __devinit probe_maple_controller(struct device *dev)
+{
+	static const short btn_bit[32] = {
+		BTN_C, BTN_B, BTN_A, BTN_START, -1, -1, -1, -1,
+		BTN_Z, BTN_Y, BTN_X, BTN_SELECT, -1, -1, -1, -1,
+		-1, -1, -1, -1, -1, -1, -1, -1,
+		-1, -1, -1, -1, -1, -1, -1, -1,
+	};
+
+	static const short abs_bit[32] = {
+		-1, -1, -1, -1, ABS_HAT0Y, ABS_HAT0Y, ABS_HAT0X, ABS_HAT0X,
+		-1, -1, -1, -1, ABS_HAT1Y, ABS_HAT1Y, ABS_HAT1X, ABS_HAT1X,
+		ABS_GAS, ABS_BRAKE, ABS_X, ABS_Y, ABS_RX, ABS_RY, -1, -1,
+		-1, -1, -1, -1, -1, -1, -1, -1,
+	};
+
+	struct maple_device *mdev = to_maple_dev(dev);
+	struct maple_driver *mdrv = to_maple_driver(dev->driver);
+	int i, error;
+	struct dc_pad *pad;
+	struct input_dev *idev;
+	unsigned long data = be32_to_cpu(mdev->devinfo.function_data[0]);
+
+	pad = kzalloc(sizeof(struct dc_pad), GFP_KERNEL);
+	idev = input_allocate_device();
+	if (!pad || !idev) {
+		error = -ENOMEM;
+		goto fail;
+	}
+
+	pad->dev = idev;
+	pad->mdev = mdev;
+
+	idev->open = dc_pad_open;
+	idev->close = dc_pad_close;
+
+	for (i = 0; i < 32; i++) {
+		if (data & (1 << i)) {
+			if (btn_bit[i] >= 0)
+				__set_bit(btn_bit[i], idev->keybit);
+			else if (abs_bit[i] >= 0)
+				__set_bit(abs_bit[i], idev->absbit);
+		}
+	}
+
+	if (idev->keybit[BIT_WORD(BTN_JOYSTICK)])
+		idev->evbit[0] |= BIT_MASK(EV_KEY);
+
+	if (idev->absbit[0])
+		idev->evbit[0] |= BIT_MASK(EV_ABS);
+
+	for (i = ABS_X; i <= ABS_BRAKE; i++)
+		input_set_abs_params(idev, i, 0, 255, 0, 0);
+
+	for (i = ABS_HAT0X; i <= ABS_HAT3Y; i++)
+		input_set_abs_params(idev, i, 1, -1, 0, 0);
+
+	idev->dev.platform_data = pad;
+	idev->dev.parent = &mdev->dev;
+	idev->name = mdev->product_name;
+	idev->id.bustype = BUS_HOST;
+	input_set_drvdata(idev, pad);
+
+	error = input_register_device(idev);
+	if (error)
+		goto fail;
+
+	mdev->driver = mdrv;
+	maple_set_drvdata(mdev, pad);
+
+	return 0;
+
+fail:
+	input_free_device(idev);
+	kfree(pad);
+	maple_set_drvdata(mdev, NULL);
+	return error;
+}
+
+static int __devexit remove_maple_controller(struct device *dev)
+{
+	struct maple_device *mdev = to_maple_dev(dev);
+	struct dc_pad *pad = maple_get_drvdata(mdev);
+
+	mdev->callback = NULL;
+	input_unregister_device(pad->dev);
+	maple_set_drvdata(mdev, NULL);
+	kfree(pad);
+
+	return 0;
+}
+
+static struct maple_driver dc_pad_driver = {
+	.function =	MAPLE_FUNC_CONTROLLER,
+	.drv = {
+		.name	= "Dreamcast_controller",
+		.probe	= probe_maple_controller,
+		.remove	= __devexit_p(remove_maple_controller),
+	},
+};
+
+static int __init dc_pad_init(void)
+{
+	return maple_driver_register(&dc_pad_driver);
+}
+
+static void __exit dc_pad_exit(void)
+{
+	maple_driver_unregister(&dc_pad_driver);
+}
+
+module_init(dc_pad_init);
+module_exit(dc_pad_exit);
-- 
cgit v1.2.3


From e941da3110422c4e57c3d05759fb9475b28f45f6 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 30 Dec 2008 01:09:02 -0800
Subject: Input: gtco - use USB endpoint API

Use usb_endpoint_xfer_int(epd) instead of open-conding the check.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/gtco.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 5524e01dbb1..2e18a1c0c35 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -877,7 +877,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	dbg("num endpoints:     %d", usbinterface->cur_altsetting->desc.bNumEndpoints);
 	dbg("interface class:   %d", usbinterface->cur_altsetting->desc.bInterfaceClass);
 	dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType);
-	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)
+	if (usb_endpoint_xfer_int(endpoint))
 		dbg("endpoint: we have interrupt endpoint\n");
 
 	dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen);
-- 
cgit v1.2.3


From 9334e90d5ac5ee1fa6d8b75acb7c64a8907787d1 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Tue, 6 Jan 2009 01:35:45 -0800
Subject: Input: i8042 - add Dell Vostro 1510 to nomux list

Dell Vostro needs 'nomux' quirk, otherwise the touchpad misbehaves.

Reported-by: Robert Kiwanuka <robert.kiwanuka@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers')

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index e196bf246f3..6fa2deff744 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -359,6 +359,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
 		},
 	},
+	{
+		.ident = "Dell Vostro 1510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
+		},
+	},
 	{ }
 };
 
-- 
cgit v1.2.3