From 1aafd9091226a02b481298315f959f777294684e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 25 Jul 2007 11:19:14 +0800 Subject: Blackfin arch: revise anomaly handling by basing things on the compiler not the kconfig defines revise anomaly handling by basing things on the compiler not the kconfig defines, so the header is stable and usable outside of the kernel. This also allows us to move some code from preprocessing to compiling (gcc culls dead code) which should help with code quality (readability, catch minor bugs, etc...). Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf561/anomaly.h | 378 +++++++++++++++++++----------- include/asm-blackfin/mach-bf561/bf561.h | 2 +- 2 files changed, 237 insertions(+), 143 deletions(-) (limited to 'include/asm-blackfin/mach-bf561') diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index 5a7986a83be..4cb3337d45e 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -7,155 +7,249 @@ */ /* This file shoule be up to date with: - * - Revision L, Aug 10, 2006; ADSP-BF561 Silicon Anomaly List + * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List */ #ifndef _MACH_ANOMALY_H_ #define _MACH_ANOMALY_H_ -/* We do not support 0.1 or 0.4 silicon - sorry */ -#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) -#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +/* We do not support 0.1, 0.2, or 0.4 silicon - sorry */ +#if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4 +# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif -/* Issues that are common to 0.5 and 0.3 silicon */ -#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in - * slot1 and store of a P register in slot 2 is not - * supported */ -#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not - * updated at the same time. */ -#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned - * memory locations */ -#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR - * registers */ -#define ANOMALY_05000127 /* Signbits instruction not functional under certain - * conditions */ -#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ -#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out - * upper bits */ -#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ -#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame - * syncs */ -#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz - * and higher devices */ -#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ -#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ -#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not - * functional */ -#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the - * shadow of a conditional branch */ -#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop - * may cause bad instruction fetches */ -#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on - * external SPORT TX and RX clocks */ -#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ -#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal - * voltage regulator (VDDint) to increase */ -#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal - * voltage regulator (VDDint) to decrease */ -#define ANOMALY_05000272 /* Certain data cache write through modes fail for - * VDDint <=0.9V */ -#define ANOMALY_05000274 /* Data cache write back to external synchronous memory - * may be lost */ -#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ -#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC - * registers are interrupted */ +/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ +#define ANOMALY_05000074 (1) +/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ +#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) +/* Trace Buffers may contain errors in emulation mode and/or exception, NMI, reset handlers */ +#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) +/* Testset instructions restricted to 32-bit aligned memory locations */ +#define ANOMALY_05000120 (1) +/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ +#define ANOMALY_05000122 (1) +/* Erroneous exception when enabling cache */ +#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) +/* Signbits instruction not functional under certain conditions */ +#define ANOMALY_05000127 (1) +/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */ +#define ANOMALY_05000134 (__SILICON_REVISION__ < 3) +/* Enable wires from the Data Watchpoint Address Control Register (WPDACTL) are swapped */ +#define ANOMALY_05000135 (__SILICON_REVISION__ < 3) +/* Stall in multi-unit DMA operations */ +#define ANOMALY_05000136 (__SILICON_REVISION__ < 3) +/* Allowing the SPORT RX FIFO to fill will cause an overflow */ +#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) +/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */ +#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) +/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ +#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) +/* DMA and TESTSET conflict when both are accessing external memory */ +#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) +/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ +#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) +/* MDMA may lose the first few words of a descriptor chain */ +#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) +/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */ +#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) +/* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000149 (1) +/* DMA engine may lose data due to incorrect handshaking */ +#define ANOMALY_05000150 (__SILICON_REVISION__ < 3) +/* DMA stalls when all three controllers read data from the same source */ +#define ANOMALY_05000151 (__SILICON_REVISION__ < 3) +/* Execution stall when executing in L2 and doing external accesses */ +#define ANOMALY_05000152 (__SILICON_REVISION__ < 3) +/* Frame Delay in SPORT Multichannel Mode */ +#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) +/* SPORT TFS signal stays active in multichannel mode outside of valid channels */ +#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) +/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */ +#define ANOMALY_05000156 (__SILICON_REVISION__ < 4) +/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ +#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) +/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ +#define ANOMALY_05000159 (__SILICON_REVISION__ < 3) +/* A read from external memory may return a wrong value with data cache enabled */ +#define ANOMALY_05000160 (__SILICON_REVISION__ < 3) +/* Data Cache Fill data can be corrupted after/during Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000161 (__SILICON_REVISION__ < 3) +/* DMEM_CONTROL<12> is not set on Reset */ +#define ANOMALY_05000162 (__SILICON_REVISION__ < 3) +/* SPORT transmit data is not gated by external frame sync in certain conditions */ +#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) +/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ +#define ANOMALY_05000166 (1) +/* Turning Serial Ports on with External Frame Syncs */ +#define ANOMALY_05000167 (1) +/* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000168 (__SILICON_REVISION__ < 5) +/* DATA CPLB page miss can result in lost write-through cache data writes */ +#define ANOMALY_05000169 (__SILICON_REVISION__ < 5) +/* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000171 (__SILICON_REVISION__ < 5) +/* DSPID register values incorrect */ +#define ANOMALY_05000172 (__SILICON_REVISION__ < 3) +/* DMA vs Core accesses to external memory */ +#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) +/* Cache Fill Buffer Data lost */ +#define ANOMALY_05000174 (__SILICON_REVISION__ < 5) +/* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000175 (__SILICON_REVISION__ < 5) +/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ +#define ANOMALY_05000176 (__SILICON_REVISION__ < 5) +/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ +#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) +/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ +#define ANOMALY_05000180 (1) +/* Disabling the PPI resets the PPI configuration registers */ +#define ANOMALY_05000181 (__SILICON_REVISION__ < 5) +/* IMDMA does not operate to full speed for 600MHz and higher devices */ +#define ANOMALY_05000182 (1) +/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */ +#define ANOMALY_05000184 (__SILICON_REVISION__ < 5) +/* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000185 (__SILICON_REVISION__ < 5) +/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */ +#define ANOMALY_05000186 (__SILICON_REVISION__ < 5) +/* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000187 (1) +/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */ +#define ANOMALY_05000188 (__SILICON_REVISION__ < 5) +/* False Protection Exceptions */ +#define ANOMALY_05000189 (__SILICON_REVISION__ < 5) +/* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000190 (1) +/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ +#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) +/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ +#define ANOMALY_05000193 (__SILICON_REVISION__ < 5) +/* Restarting SPORT in Specific Modes May Cause Data Corruption */ +#define ANOMALY_05000194 (__SILICON_REVISION__ < 5) +/* Failing MMR Accesses When Stalled by Preceding Memory Read */ +#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) +/* Current DMA Address Shows Wrong Value During Carry Fix */ +#define ANOMALY_05000199 (__SILICON_REVISION__ < 5) +/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ +#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) +/* Possible Infinite Stall with Specific Dual-DAG Situation */ +#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) +/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ +#define ANOMALY_05000204 (__SILICON_REVISION__ < 5) +/* Specific sequence that can cause DMA error or DMA stopping */ +#define ANOMALY_05000205 (__SILICON_REVISION__ < 5) +/* Recovery from "Brown-Out" Condition */ +#define ANOMALY_05000207 (__SILICON_REVISION__ < 5) +/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ +#define ANOMALY_05000208 (1) +/* Speed Path in Computational Unit Affects Certain Instructions */ +#define ANOMALY_05000209 (__SILICON_REVISION__ < 5) +/* UART TX Interrupt Masked Erroneously */ +#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) +/* NMI Event at Boot Time Results in Unpredictable State */ +#define ANOMALY_05000219 (__SILICON_REVISION__ < 5) +/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000220 (__SILICON_REVISION__ < 5) +/* Incorrect Pulse-Width of UART Start Bit */ +#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) +/* Scratchpad Memory Bank Reads May Return Incorrect Data */ +#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) +/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ +#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) +/* UART STB Bit Incorrectly Affects Receiver Setting */ +#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) +/* SPORT data transmit lines are incorrectly driven in multichannel mode */ +#define ANOMALY_05000232 (__SILICON_REVISION__ < 5) +/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ +#define ANOMALY_05000242 (__SILICON_REVISION__ < 5) +/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ +#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) +/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_05000245 (__SILICON_REVISION__ < 5) +/* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000248 (__SILICON_REVISION__ < 5) +/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ +#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5) +/* Exception Not Generated for MMR Accesses in Reserved Region */ +#define ANOMALY_05000251 (__SILICON_REVISION__ < 5) +/* Maximum External Clock Speed for Timers */ +#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) +/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ +#define ANOMALY_05000254 (__SILICON_REVISION__ > 3) +/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ +#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) +/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ +#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) +/* ICPLB_STATUS MMR Register May Be Corrupted */ +#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) +/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ +#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) +/* Stores To Data Cache May Be Lost */ +#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) +/* Hardware Loop Corrupted When Taking an ICPLB Exception */ +#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) +/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ +#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) +/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ +#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) +/* IMDMA destination IRQ status must be read prior to using IMDMA */ +#define ANOMALY_05000266 (__SILICON_REVISION__ > 3) +/* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000267 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ +#define ANOMALY_05000269 (1) +/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ +#define ANOMALY_05000270 (1) +/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ +#define ANOMALY_05000272 (1) +/* Data cache write back to external synchronous memory may be lost */ +#define ANOMALY_05000274 (1) +/* PPI Timing and Sampling Information Updates */ +#define ANOMALY_05000275 (__SILICON_REVISION__ > 2) +/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ +#define ANOMALY_05000276 (__SILICON_REVISION__ < 5) +/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ +#define ANOMALY_05000278 (__SILICON_REVISION__ < 5) +/* False Hardware Error Exception When ISR Context Is Not Restored */ +#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) +/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ +#define ANOMALY_05000283 (1) +/* A read will receive incorrect data under certain conditions */ +#define ANOMALY_05000287 (__SILICON_REVISION__ < 5) +/* SPORTs May Receive Bad Data If FIFOs Fill Up */ +#define ANOMALY_05000288 (__SILICON_REVISION__ < 5) +/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ +#define ANOMALY_05000301 (1) +/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ +#define ANOMALY_05000302 (1) +/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ +#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) +/* SCKELOW Bit Does Not Maintain State Through Hibernate */ +#define ANOMALY_05000307 (__SILICON_REVISION__ < 5) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_05000310 (1) +/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) +/* PPI Is Level-Sensitive on First Transfer */ +#define ANOMALY_05000313 (1) +/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ +#define ANOMALY_05000315 (1) +/* PF2 Output Remains Asserted After SPI Master Boot */ +#define ANOMALY_05000320 (__SILICON_REVISION__ > 3) +/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */ +#define ANOMALY_05000323 (1) +/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */ +#define ANOMALY_05000326 (__SILICON_REVISION__ > 3) +/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */ +#define ANOMALY_05000331 (__SILICON_REVISION__ < 5) +/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */ +#define ANOMALY_05000332 (__SILICON_REVISION__ < 5) +/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ +#define ANOMALY_05000333 (__SILICON_REVISION__ < 5) -#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000183 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000311 (0) -#if (defined(CONFIG_BF_REV_0_5)) -#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT - * mode with external clock */ -#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to - * using IMDMA */ #endif - -#if (defined(CONFIG_BF_REV_0_3)) -#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) - * Mode with 0 Frame Syncs */ -#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ -#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through - * cache data writes */ -#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ -#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ -#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ -#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an - * accumulator saturation */ -#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General - * Purpose TX or RX modes */ -#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration - * registers */ -#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with - * External Frame Syncs */ -#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ -#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits - * (not a meaningful mode) */ -#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer - * Placement in Memory */ -#define ANOMALY_05000189 /* False Protection Exception */ -#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs - * when polarity setting is changed */ -#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data - * corruption */ -#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding - * memory read */ -#define ANOMALY_05000199 /* DMA current address shows wrong value during carry - * fix */ -#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during - * inactive channels in certain conditions */ -#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG - * situation */ -#define ANOMALY_05000204 /* Incorrect data read with write-through cache and - * allocate cache lines on reads only mode */ -#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA - * stopping */ -#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ -#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain - * instructions */ -#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ -#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable - * state */ -#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and - * Non-Cached On-Chip L2 Memory */ -#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ -#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect - * data */ -#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate - * Differences in certain Conditions */ -#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ -#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in - * multichannel mode */ -#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to - * hardware reset */ -#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of - * Control causes failures */ -#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ -#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel - * (TDM) mode in certain conditions */ -#define ANOMALY_05000251 /* Exception not generated for MMR accesses in - * reserved region */ -#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ -#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 - * of the ICPLB Data registers differ */ -#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ -#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ -#define ANOMALY_05000262 /* Stores to data cache may be lost */ -#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB - * exception */ -#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second - * to last instruction in hardware loop */ -#define ANOMALY_05000276 /* Timing requirements change for External Frame - * Sync PPI Modes with non-zero PPI_DELAY */ -#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause - * DMA system instability */ -#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is - * not restored */ -#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed - * in a particular stage */ -#define ANOMALY_05000287 /* A read will receive incorrect data under certain - * conditions */ -#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ -#endif - -#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/include/asm-blackfin/mach-bf561/bf561.h index 96a5d3a47e4..8cc2e0033e0 100644 --- a/include/asm-blackfin/mach-bf561/bf561.h +++ b/include/asm-blackfin/mach-bf561/bf561.h @@ -311,7 +311,7 @@ #define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly #endif -#if defined(ANOMALY_05000273) && (CONFIG_CCLK_DIV == 1) +#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1) #error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK #endif -- cgit v1.2.3