From a00736e936c2a1e9c36f22f6f3a69392eaab51f4 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 19 Jun 2008 20:26:19 +0200 Subject: sparc: copy sparc64 specific files to asm-sparc Used the following script to copy the files: cd include set -e SPARC64=`ls asm-sparc64` for FILE in ${SPARC64}; do if [ -f asm-sparc/$FILE ]; then echo $FILE exist in asm-sparc else git mv asm-sparc64/$FILE asm-sparc/$FILE printf "#include \n" > asm-sparc64/$FILE git add asm-sparc64/$FILE fi done Signed-off-by: Sam Ravnborg --- include/asm-sparc/hypervisor.h | 2945 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2945 insertions(+) create mode 100644 include/asm-sparc/hypervisor.h (limited to 'include/asm-sparc/hypervisor.h') diff --git a/include/asm-sparc/hypervisor.h b/include/asm-sparc/hypervisor.h new file mode 100644 index 00000000000..0c0f41cf746 --- /dev/null +++ b/include/asm-sparc/hypervisor.h @@ -0,0 +1,2945 @@ +#ifndef _SPARC64_HYPERVISOR_H +#define _SPARC64_HYPERVISOR_H + +/* Sun4v hypervisor interfaces and defines. + * + * Hypervisor calls are made via traps to software traps number 0x80 + * and above. Registers %o0 to %o5 serve as argument, status, and + * return value registers. + * + * There are two kinds of these traps. First there are the normal + * "fast traps" which use software trap 0x80 and encode the function + * to invoke by number in register %o5. Argument and return value + * handling is as follows: + * + * ----------------------------------------------- + * | %o5 | function number | undefined | + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * The second type are "hyper-fast traps" which encode the function + * number in the software trap number itself. So these use trap + * numbers > 0x80. The register usage for hyper-fast traps is as + * follows: + * + * ----------------------------------------------- + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * Registers providing explicit arguments to the hypervisor calls + * are volatile across the call. Upon return their values are + * undefined unless explicitly specified as containing a particular + * return value by the specific call. The return status is always + * returned in register %o0, zero indicates a successful execution of + * the hypervisor call and other values indicate an error status as + * defined below. So, for example, if a hyper-fast trap takes + * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across + * the call and %o3, %o4, and %o5 would be preserved. + * + * If the hypervisor trap is invalid, or the fast trap function number + * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits + * of the argument and return values are significant. + */ + +/* Trap numbers. */ +#define HV_FAST_TRAP 0x80 +#define HV_MMU_MAP_ADDR_TRAP 0x83 +#define HV_MMU_UNMAP_ADDR_TRAP 0x84 +#define HV_TTRACE_ADDENTRY_TRAP 0x85 +#define HV_CORE_TRAP 0xff + +/* Error codes. */ +#define HV_EOK 0 /* Successful return */ +#define HV_ENOCPU 1 /* Invalid CPU id */ +#define HV_ENORADDR 2 /* Invalid real address */ +#define HV_ENOINTR 3 /* Invalid interrupt id */ +#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ +#define HV_EBADTSB 5 /* Invalid TSB description */ +#define HV_EINVAL 6 /* Invalid argument */ +#define HV_EBADTRAP 7 /* Invalid function number */ +#define HV_EBADALIGN 8 /* Invalid address alignment */ +#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ +#define HV_ENOACCESS 10 /* No access to resource */ +#define HV_EIO 11 /* I/O error */ +#define HV_ECPUERROR 12 /* CPU in error state */ +#define HV_ENOTSUPPORTED 13 /* Function not supported */ +#define HV_ENOMAP 14 /* No mapping found */ +#define HV_ETOOMANY 15 /* Too many items specified */ +#define HV_ECHANNEL 16 /* Invalid LDC channel */ +#define HV_EBUSY 17 /* Resource busy */ + +/* mach_exit() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_EXIT + * ARG0: exit code + * ERRORS: This service does not return. + * + * Stop all CPUs in the virtual domain and place them into the stopped + * state. The 64-bit exit code may be passed to a service entity as + * the domain's exit status. On systems without a service entity, the + * domain will undergo a reset, and the boot firmware will be + * reloaded. + * + * This function will never return to the guest that invokes it. + * + * Note: By convention an exit code of zero denotes a successful exit by + * the guest code. A non-zero exit code denotes a guest specific + * error indication. + * + */ +#define HV_FAST_MACH_EXIT 0x00 + +#ifndef __ASSEMBLY__ +extern void sun4v_mach_exit(unsigned long exit_code); +#endif + +/* Domain services. */ + +/* mach_desc() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_DESC + * ARG0: buffer + * ARG1: length + * RET0: status + * RET1: length + * ERRORS: HV_EBADALIGN Buffer is badly aligned + * HV_ENORADDR Buffer is to an illegal real address. + * HV_EINVAL Buffer length is too small for complete + * machine description. + * + * Copy the most current machine description into the buffer indicated + * by the real address in ARG0. The buffer provided must be 16 byte + * aligned. Upon success or HV_EINVAL, this service returns the + * actual size of the machine description in the RET1 return value. + * + * Note: A method of determining the appropriate buffer size for the + * machine description is to first call this service with a buffer + * length of 0 bytes. + */ +#define HV_FAST_MACH_DESC 0x01 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, + unsigned long buf_len, + unsigned long *real_buf_len); +#endif + +/* mach_sir() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SIR + * ERRORS: This service does not return. + * + * Perform a software initiated reset of the virtual machine domain. + * All CPUs are captured as soon as possible, all hardware devices are + * returned to the entry default state, and the domain is restarted at + * the SIR (trap type 0x04) real trap table (RTBA) entry point on one + * of the CPUs. The single CPU restarted is selected as determined by + * platform specific policy. Memory is preserved across this + * operation. + */ +#define HV_FAST_MACH_SIR 0x02 + +#ifndef __ASSEMBLY__ +extern void sun4v_mach_sir(void); +#endif + +/* mach_set_watchdog() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_WATCHDOG + * ARG0: timeout in milliseconds + * RET0: status + * RET1: time remaining in milliseconds + * + * A guest uses this API to set a watchdog timer. Once the gues has set + * the timer, it must call the timer service again either to disable or + * postpone the expiration. If the timer expires before being reset or + * disabled, then the hypervisor take a platform specific action leading + * to guest termination within a bounded time period. The platform action + * may include recovery actions such as reporting the expiration to a + * Service Processor, and/or automatically restarting the gues. + * + * The 'timeout' parameter is specified in milliseconds, however the + * implementated granularity is given by the 'watchdog-resolution' + * property in the 'platform' node of the guest's machine description. + * The largest allowed timeout value is specified by the + * 'watchdog-max-timeout' property of the 'platform' node. + * + * If the 'timeout' argument is not zero, the watchdog timer is set to + * expire after a minimum of 'timeout' milliseconds. + * + * If the 'timeout' argument is zero, the watchdog timer is disabled. + * + * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout' + * property, the hypervisor leaves the watchdog timer state unchanged, + * and returns a status of EINVAL. + * + * The 'time remaining' return value is valid regardless of whether the + * return status is EOK or EINVAL. A non-zero return value indicates the + * number of milliseconds that were remaining until the timer was to expire. + * If less than one millisecond remains, the return value is '1'. If the + * watchdog timer was disabled at the time of the call, the return value is + * zero. + * + * If the hypervisor cannot support the exact timeout value requested, but + * can support a larger timeout value, the hypervisor may round the actual + * timeout to a value larger than the requested timeout, consequently the + * 'time remaining' return value may be larger than the previously requested + * timeout value. + * + * Any guest OS debugger should be aware that the watchdog service may be in + * use. Consequently, it is recommended that the watchdog service is + * disabled upon debugger entry (e.g. reaching a breakpoint), and then + * re-enabled upon returning to normal execution. The API has been designed + * with this in mind, and the 'time remaining' result of the disable call may + * be used directly as the timeout argument of the re-enable call. + */ +#define HV_FAST_MACH_SET_WATCHDOG 0x05 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout, + unsigned long *orig_timeout); +#endif + +/* CPU services. + * + * CPUs represent devices that can execute software threads. A single + * chip that contains multiple cores or strands is represented as + * multiple CPUs with unique CPU identifiers. CPUs are exported to + * OBP via the machine description (and to the OS via the OBP device + * tree). CPUs are always in one of three states: stopped, running, + * or error. + * + * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a + * CPU within a logical domain. Operations that are to be performed + * on multiple CPUs specify them via a CPU list. A CPU list is an + * array in real memory, of which each 16-bit word is a CPU ID. CPU + * lists are passed through the API as two arguments. The first is + * the number of entries (16-bit words) in the CPU list, and the + * second is the (real address) pointer to the CPU ID list. + */ + +/* cpu_start() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_START + * ARG0: CPU ID + * ARG1: PC + * ARG2: RTBA + * ARG3: target ARG0 + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is not in the stopped state + * ENORADDR Invalid PC or RTBA real address + * EBADALIGN Unaligned PC or unaligned RTBA + * EWOULDBLOCK Starting resources are not available + * + * Start CPU with given CPU ID with PC in %pc and with a real trap + * base address value of RTBA. The indicated CPU must be in the + * stopped state. The supplied RTBA must be aligned on a 256 byte + * boundary. On successful completion, the specified CPU will be in + * the running state and will be supplied with "target ARG0" in %o0 + * and RTBA in %tba. + */ +#define HV_FAST_CPU_START 0x10 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_start(unsigned long cpuid, + unsigned long pc, + unsigned long rtba, + unsigned long arg0); +#endif + +/* cpu_stop() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STOP + * ARG0: CPU ID + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is the current cpu + * EINVAL Target CPU ID is not in the running state + * EWOULDBLOCK Stopping resources are not available + * ENOTSUPPORTED Not supported on this platform + * + * The specified CPU is stopped. The indicated CPU must be in the + * running state. On completion, it will be in the stopped state. It + * is not legal to stop the current CPU. + * + * Note: As this service cannot be used to stop the current cpu, this service + * may not be used to stop the last running CPU in a domain. To stop + * and exit a running domain, a guest must use the mach_exit() service. + */ +#define HV_FAST_CPU_STOP 0x11 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_stop(unsigned long cpuid); +#endif + +/* cpu_yield() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_YIELD + * RET0: status + * ERRORS: No possible error. + * + * Suspend execution on the current CPU. Execution will resume when + * an interrupt (device, %stick_compare, or cross-call) is targeted to + * the CPU. On some CPUs, this API may be used by the hypervisor to + * save power by disabling hardware strands. + */ +#define HV_FAST_CPU_YIELD 0x12 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_yield(void); +#endif + +/* cpu_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QCONF + * ARG0: queue + * ARG1: base real address + * ARG2: number of entries + * RET0: status + * ERRORS: ENORADDR Invalid base real address + * EINVAL Invalid queue or number of entries is less + * than 2 or too large. + * EBADALIGN Base real address is not correctly aligned + * for size. + * + * Configure the given queue to be placed at the given base real + * address, with the given number of entries. The number of entries + * must be a power of 2. The base real address must be aligned + * exactly to match the queue size. Each queue entry is 64 bytes + * long, so for example a 32 entry queue must be aligned on a 2048 + * byte real address boundary. + * + * The specified queue is unconfigured if the number of entries is given + * as zero. + * + * For the current version of this API service, the argument queue is defined + * as follows: + * + * queue description + * ----- ------------------------- + * 0x3c cpu mondo queue + * 0x3d device mondo queue + * 0x3e resumable error queue + * 0x3f non-resumable error queue + * + * Note: The maximum number of entries for each queue for a specific cpu may + * be determined from the machine description. + */ +#define HV_FAST_CPU_QCONF 0x14 +#define HV_CPU_QUEUE_CPU_MONDO 0x3c +#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d +#define HV_CPU_QUEUE_RES_ERROR 0x3e +#define HV_CPU_QUEUE_NONRES_ERROR 0x3f + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_qconf(unsigned long type, + unsigned long queue_paddr, + unsigned long num_queue_entries); +#endif + +/* cpu_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QINFO + * ARG0: queue + * RET0: status + * RET1: base real address + * RET1: number of entries + * ERRORS: EINVAL Invalid queue + * + * Return the configuration info for the given queue. The base real + * address and number of entries of the defined queue are returned. + * The queue argument values are the same as for cpu_qconf() above. + * + * If the specified queue is a valid queue number, but no queue has + * been defined, the number of entries will be set to zero and the + * base real address returned is undefined. + */ +#define HV_FAST_CPU_QINFO 0x15 + +/* cpu_mondo_send() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MONDO_SEND + * ARG0-1: CPU list + * ARG2: data real address + * RET0: status + * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list + * is not 2-byte aligned. + * ENORADDR Invalid data mondo address, or invalid cpu list + * address. + * ENOCPU Invalid cpu in CPU list + * EWOULDBLOCK Some or all of the listed CPUs did not receive + * the mondo + * ECPUERROR One or more of the listed CPUs are in error + * state, use HV_FAST_CPU_STATE to see which ones + * EINVAL CPU list includes caller's CPU ID + * + * Send a mondo interrupt to the CPUs in the given CPU list with the + * 64-bytes at the given data real address. The data must be 64-byte + * aligned. The mondo data will be delivered to the cpu_mondo queues + * of the recipient CPUs. + * + * In all cases, error or not, the CPUs in the CPU list to which the + * mondo has been successfully delivered will be indicated by having + * their entry in CPU list updated with the value 0xffff. + */ +#define HV_FAST_CPU_MONDO_SEND 0x42 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa); +#endif + +/* cpu_myid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MYID + * RET0: status + * RET1: CPU ID + * ERRORS: No errors defined. + * + * Return the hypervisor ID handle for the current CPU. Use by a + * virtual CPU to discover it's own identity. + */ +#define HV_FAST_CPU_MYID 0x16 + +/* cpu_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STATE + * ARG0: CPU ID + * RET0: status + * RET1: state + * ERRORS: ENOCPU Invalid CPU ID + * + * Retrieve the current state of the CPU with the given CPU ID. + */ +#define HV_FAST_CPU_STATE 0x17 +#define HV_CPU_STATE_STOPPED 0x01 +#define HV_CPU_STATE_RUNNING 0x02 +#define HV_CPU_STATE_ERROR 0x03 + +#ifndef __ASSEMBLY__ +extern long sun4v_cpu_state(unsigned long cpuid); +#endif + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_SET_RTBA + * ARG0: RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: ENORADDR Invalid RTBA real address + * EBADALIGN RTBA is incorrectly aligned for a trap table + * + * Set the real trap base address of the local cpu to the given RTBA. + * The supplied RTBA must be aligned on a 256 byte boundary. Upon + * success the previous value of the RTBA is returned in RET1. + * + * Note: This service does not affect %tba + */ +#define HV_FAST_CPU_SET_RTBA 0x18 + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_GET_RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: No possible error. + * + * Returns the current value of RTBA in RET1. + */ +#define HV_FAST_CPU_GET_RTBA 0x19 + +/* MMU services. + * + * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. + */ +#ifndef __ASSEMBLY__ +struct hv_tsb_descr { + unsigned short pgsz_idx; + unsigned short assoc; + unsigned int num_ttes; /* in TTEs */ + unsigned int ctx_idx; + unsigned int pgsz_mask; + unsigned long tsb_base; + unsigned long resv; +}; +#endif +#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 +#define HV_TSB_DESCR_ASSOC_OFFSET 0x02 +#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 +#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 +#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c +#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 +#define HV_TSB_DESCR_RESV_OFFSET 0x18 + +/* Page size bitmask. */ +#define HV_PGSZ_MASK_8K (1 << 0) +#define HV_PGSZ_MASK_64K (1 << 1) +#define HV_PGSZ_MASK_512K (1 << 2) +#define HV_PGSZ_MASK_4MB (1 << 3) +#define HV_PGSZ_MASK_32MB (1 << 4) +#define HV_PGSZ_MASK_256MB (1 << 5) +#define HV_PGSZ_MASK_2GB (1 << 6) +#define HV_PGSZ_MASK_16GB (1 << 7) + +/* Page size index. The value given in the TSB descriptor must correspond + * to the smallest page size specified in the pgsz_mask page size bitmask. + */ +#define HV_PGSZ_IDX_8K 0 +#define HV_PGSZ_IDX_64K 1 +#define HV_PGSZ_IDX_512K 2 +#define HV_PGSZ_IDX_4MB 3 +#define HV_PGSZ_IDX_32MB 4 +#define HV_PGSZ_IDX_256MB 5 +#define HV_PGSZ_IDX_2GB 6 +#define HV_PGSZ_IDX_16GB 7 + +/* MMU fault status area. + * + * MMU related faults have their status and fault address information + * placed into a memory region made available by privileged code. Each + * virtual processor must make a mmu_fault_area_conf() call to tell the + * hypervisor where that processor's fault status should be stored. + * + * The fault status block is a multiple of 64-bytes and must be aligned + * on a 64-byte boundary. + */ +#ifndef __ASSEMBLY__ +struct hv_fault_status { + unsigned long i_fault_type; + unsigned long i_fault_addr; + unsigned long i_fault_ctx; + unsigned long i_reserved[5]; + unsigned long d_fault_type; + unsigned long d_fault_addr; + unsigned long d_fault_ctx; + unsigned long d_reserved[5]; +}; +#endif +#define HV_FAULT_I_TYPE_OFFSET 0x00 +#define HV_FAULT_I_ADDR_OFFSET 0x08 +#define HV_FAULT_I_CTX_OFFSET 0x10 +#define HV_FAULT_D_TYPE_OFFSET 0x40 +#define HV_FAULT_D_ADDR_OFFSET 0x48 +#define HV_FAULT_D_CTX_OFFSET 0x50 + +#define HV_FAULT_TYPE_FAST_MISS 1 +#define HV_FAULT_TYPE_FAST_PROT 2 +#define HV_FAULT_TYPE_MMU_MISS 3 +#define HV_FAULT_TYPE_INV_RA 4 +#define HV_FAULT_TYPE_PRIV_VIOL 5 +#define HV_FAULT_TYPE_PROT_VIOL 6 +#define HV_FAULT_TYPE_NFO 7 +#define HV_FAULT_TYPE_NFO_SEFF 8 +#define HV_FAULT_TYPE_INV_VA 9 +#define HV_FAULT_TYPE_INV_ASI 10 +#define HV_FAULT_TYPE_NC_ATOMIC 11 +#define HV_FAULT_TYPE_PRIV_ACT 12 +#define HV_FAULT_TYPE_RESV1 13 +#define HV_FAULT_TYPE_UNALIGNED 14 +#define HV_FAULT_TYPE_INV_PGSZ 15 +/* Values 16 --> -2 are reserved. */ +#define HV_FAULT_TYPE_MULTIPLE -1 + +/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), + * and mmu_{map,unmap}_perm_addr(). + */ +#define HV_MMU_DMMU 0x01 +#define HV_MMU_IMMU 0x02 +#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) + +/* mmu_map_addr() + * TRAP: HV_MMU_MAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * + * Create a non-permanent mapping using the given TTE, virtual + * address, and mmu context. The flags argument determines which + * (data, or instruction, or both) TLB the mapping gets loaded into. + * + * The behavior is undefined if the valid bit is clear in the TTE. + * + * Note: This API call is for privileged code to specify temporary translation + * mappings without the need to create and manage a TSB. + */ + +/* mmu_unmap_addr() + * TRAP: HV_MMU_UNMAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * + * Demaps the given virtual address in the given mmu context on this + * CPU. This function is intended to be used to demap pages mapped + * with mmu_map_addr. This service is equivalent to invoking + * mmu_demap_page() with only the current CPU in the CPU list. The + * flags argument determines which (data, or instruction, or both) TLB + * the mapping gets unmapped from. + * + * Attempting to perform an unmap operation for a previously defined + * permanent mapping will have undefined results. + */ + +/* mmu_tsb_ctx0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: ENORADDR Invalid TSB descriptions pointer or + * TSB base within a descriptor + * EBADALIGN TSB descriptions pointer is not aligned + * to an 8-byte boundary, or TSB base + * within a descriptor is not aligned for + * the given TSB size + * EBADPGSZ Invalid page size in a TSB descriptor + * EBADTSB Invalid associativity or size in a TSB + * descriptor + * EINVAL Invalid number of TSB descriptions, or + * invalid context index in a TSB + * descriptor, or index page size not + * equal to smallest page size in page + * size bitmask field. + * + * Configures the TSBs for the current CPU for virtual addresses with + * context zero. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: The maximum number of TSBs available to a virtual CPU is given by the + * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the + * machine description. + */ +#define HV_FAST_MMU_TSB_CTX0 0x20 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, + unsigned long tsb_desc_ra); +#endif + +/* mmu_tsb_ctxnon0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: Same as for mmu_tsb_ctx0() above. + * + * Configures the TSBs for the current CPU for virtual addresses with + * non-zero contexts. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: A maximum of 16 TSBs may be specified in the TSB description list. + */ +#define HV_FAST_MMU_TSB_CTXNON0 0x21 + +/* mmu_demap_page() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_PAGE + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: virtual address + * ARG3: mmu context + * ARG4: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address, context, or + * flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps any page mapping of the given virtual address in the given + * mmu context for the current virtual CPU. Any virtually tagged + * caches are guaranteed to be kept consistent. The flags argument + * determines which TLB (instruction, or data, or both) participate in + * the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_PAGE 0x22 + +/* mmu_demap_ctx() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_CTX + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: mmu context + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid context or flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the given context for the current virtual CPU. Any virtual + * tagged caches are guaranteed to be kept consistent. The flags + * argument determines which TLB (instruction, or data, or both) + * participate in the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_CTX 0x23 + +/* mmu_demap_all() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_ALL + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the current virtual CPU. Any virtual tagged caches are + * guaranteed to be kept consistent. The flags argument determines + * which TLB (instruction, or data, or both) participate in the + * operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_ALL 0x24 + +#ifndef __ASSEMBLY__ +extern void sun4v_mmu_demap_all(void); +#endif + +/* mmu_map_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * ETOOMANY Too many mappings (max of 8 reached) + * + * Create a permanent mapping using the given TTE and virtual address + * for context 0 on the calling virtual CPU. A maximum of 8 such + * permanent mappings may be specified by privileged code. Mappings + * may be removed with mmu_unmap_perm_addr(). + * + * The behavior is undefined if a TTE with the valid bit clear is given. + * + * Note: This call is used to specify address space mappings for which + * privileged code does not expect to receive misses. For example, + * this mechanism can be used to map kernel nucleus code and data. + */ +#define HV_FAST_MMU_MAP_PERM_ADDR 0x25 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, + unsigned long set_to_zero, + unsigned long tte, + unsigned long flags); +#endif + +/* mmu_fault_area_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF + * ARG0: real address + * RET0: status + * RET1: previous mmu fault area real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Invalid alignment for fault area + * + * Configure the MMU fault status area for the calling CPU. A 64-byte + * aligned real address specifies where MMU fault status information + * is placed. The return value is the previously specified area, or 0 + * for the first invocation. Specifying a fault area at real address + * 0 is not allowed. + */ +#define HV_FAST_MMU_FAULT_AREA_CONF 0x26 + +/* mmu_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_ENABLE + * ARG0: enable flag + * ARG1: return target address + * RET0: status + * ERRORS: ENORADDR Invalid real address when disabling + * translation. + * EBADALIGN The return target address is not + * aligned to an instruction. + * EINVAL The enable flag request the current + * operating mode (e.g. disable if already + * disabled) + * + * Enable or disable virtual address translation for the calling CPU + * within the virtual machine domain. If the enable flag is zero, + * translation is disabled, any non-zero value will enable + * translation. + * + * When this function returns, the newly selected translation mode + * will be active. If the mmu is being enabled, then the return + * target address is a virtual address else it is a real address. + * + * Upon successful completion, control will be returned to the given + * return target address (ie. the cpu will jump to that address). On + * failure, the previous mmu mode remains and the trap simply returns + * as normal with the appropriate error code in RET0. + */ +#define HV_FAST_MMU_ENABLE 0x27 + +/* mmu_unmap_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * ENOMAP Specified mapping was not found + * + * Demaps any permanent page mapping (established via + * mmu_map_perm_addr()) at the given virtual address for context 0 on + * the current virtual CPU. Any virtual tagged caches are guaranteed + * to be kept consistent. + */ +#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 + +/* mmu_tsb_ctx0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by mmu_tsb_ctx0() + * into the provided buffer. The size of the buffer is given in ARG1 + * in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTX0_INFO 0x29 + +/* mmu_tsb_ctxnon0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by + * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer + * is given in ARG1 in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a + +/* mmu_fault_area_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO + * RET0: status + * RET1: fault area real address + * ERRORS: No errors defined. + * + * Return the currently defined MMU fault status area for the current + * CPU. The real address of the fault status area is returned in + * RET1, or 0 is returned in RET1 if no fault status area is defined. + * + * Note: mmu_fault_area_conf() may be called with the return value (RET1) + * from this service if there is a need to save and restore the fault + * area for a cpu. + */ +#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b + +/* Cache and Memory services. */ + +/* mem_scrub() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SCRUB + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length scrubbed + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Zero the memory contents in the range real address to real address + * plus length minus 1. Also, valid ECC will be generated for that + * memory address range. Scrubbing is started at the given real + * address, but may not scrub the entire given length. The actual + * length scrubbed will be returned in RET1. + * + * The real address and length must be aligned on an 8K boundary, or + * contain the start address and length from a sun4v error report. + * + * Note: There are two uses for this function. The first use is to block clear + * and initialize memory and the second is to scrub an u ncorrectable + * error reported via a resumable or non-resumable trap. The second + * use requires the arguments to be equal to the real address and length + * provided in a sun4v memory error report. + */ +#define HV_FAST_MEM_SCRUB 0x31 + +/* mem_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SYNC + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length synced + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Force the next access within the real address to real address plus + * length minus 1 to be fetches from main system memory. Less than + * the given length may be synced, the actual amount synced is + * returned in RET1. The real address and length must be aligned on + * an 8K boundary. + */ +#define HV_FAST_MEM_SYNC 0x32 + +/* Time of day services. + * + * The hypervisor maintains the time of day on a per-domain basis. + * Changing the time of day in one domain does not affect the time of + * day on any other domain. + * + * Time is described by a single unsigned 64-bit word which is the + * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, + * 1970). + */ + +/* tod_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_GET + * RET0: status + * RET1: TOD + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * Return the current time of day. May block if TOD access is + * temporarily not possible. + */ +#define HV_FAST_TOD_GET 0x50 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_get(unsigned long *time); +#endif + +/* tod_set() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_SET + * ARG0: TOD + * RET0: status + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * The current time of day is set to the value specified in ARG0. May + * block if TOD access is temporarily not possible. + */ +#define HV_FAST_TOD_SET 0x51 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_set(unsigned long time); +#endif + +/* Console services */ + +/* con_getchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_GETCHAR + * RET0: status + * RET1: character + * ERRORS: EWOULDBLOCK No character available. + * + * Returns a character from the console device. If no character is + * available then an EWOULDBLOCK error is returned. If a character is + * available, then the returned status is EOK and the character value + * is in RET1. + * + * A virtual BREAK is represented by the 64-bit value -1. + * + * A virtual HUP signal is represented by the 64-bit value -2. + */ +#define HV_FAST_CONS_GETCHAR 0x60 + +/* con_putchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_PUTCHAR + * ARG0: character + * RET0: status + * ERRORS: EINVAL Illegal character + * EWOULDBLOCK Output buffer currently full, would block + * + * Send a character to the console device. Only character values + * between 0 and 255 may be used. Values outside this range are + * invalid except for the 64-bit value -1 which is used to send a + * virtual BREAK. + */ +#define HV_FAST_CONS_PUTCHAR 0x61 + +/* con_read() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_READ + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes read or BREAK or HUP + * ERRORS: EWOULDBLOCK No character available. + * + * Reads characters into a buffer from the console device. If no + * character is available then an EWOULDBLOCK error is returned. + * If a character is available, then the returned status is EOK + * and the number of bytes read into the given buffer is provided + * in RET1. + * + * A virtual BREAK is represented by the 64-bit RET1 value -1. + * + * A virtual HUP signal is represented by the 64-bit RET1 value -2. + * + * If BREAK or HUP are indicated, no bytes were read into buffer. + */ +#define HV_FAST_CONS_READ 0x62 + +/* con_write() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_WRITE + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes written + * ERRORS: EWOULDBLOCK Output buffer currently full, would block + * + * Send a characters in buffer to the console device. Breaks must be + * sent using con_putchar(). + */ +#define HV_FAST_CONS_WRITE 0x63 + +#ifndef __ASSEMBLY__ +extern long sun4v_con_getchar(long *status); +extern long sun4v_con_putchar(long c); +extern long sun4v_con_read(unsigned long buffer, + unsigned long size, + unsigned long *bytes_read); +extern unsigned long sun4v_con_write(unsigned long buffer, + unsigned long size, + unsigned long *bytes_written); +#endif + +/* mach_set_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE + * ARG0: software state + * ARG1: software state description pointer + * RET0: status + * ERRORS: EINVAL software state not valid or software state + * description is not NULL terminated + * ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * This allows the guest to report it's soft state to the hypervisor. There + * are two primary components to this state. The first part states whether + * the guest software is running or not. The second containts optional + * details specific to the software. + * + * The software state argument is defined below in HV_SOFT_STATE_*, and + * indicates whether the guest is operating normally or in a transitional + * state. + * + * The software state description argument is a real address of a data buffer + * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL + * terminated 7-bit ASCII string of up to 31 characters not including the + * NULL termination. + */ +#define HV_FAST_MACH_SET_SOFT_STATE 0x70 +#define HV_SOFT_STATE_NORMAL 0x01 +#define HV_SOFT_STATE_TRANSITION 0x02 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state, + unsigned long msg_string_ra); +#endif + +/* mach_get_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE + * ARG0: software state description pointer + * RET0: status + * RET1: software state + * ERRORS: ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * Retrieve the current value of the guest's software state. The rules + * for the software state pointer are the same as for mach_set_soft_state() + * above. + */ +#define HV_FAST_MACH_GET_SOFT_STATE 0x71 + +/* svc_send() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_SEND + * ARG0: service ID + * ARG1: buffer real address + * ARG2: buffer size + * RET0: STATUS + * RET1: sent_bytes + * + * Be careful, all output registers are clobbered by this operation, + * so for example it is not possible to save away a value in %o4 + * across the trap. + */ +#define HV_FAST_SVC_SEND 0x80 + +/* svc_recv() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_RECV + * ARG0: service ID + * ARG1: buffer real address + * ARG2: buffer size + * RET0: STATUS + * RET1: recv_bytes + * + * Be careful, all output registers are clobbered by this operation, + * so for example it is not possible to save away a value in %o4 + * across the trap. + */ +#define HV_FAST_SVC_RECV 0x81 + +/* svc_getstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_GETSTATUS + * ARG0: service ID + * RET0: STATUS + * RET1: status bits + */ +#define HV_FAST_SVC_GETSTATUS 0x82 + +/* svc_setstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_SETSTATUS + * ARG0: service ID + * ARG1: bits to set + * RET0: STATUS + */ +#define HV_FAST_SVC_SETSTATUS 0x83 + +/* svc_clrstatus() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SVC_CLRSTATUS + * ARG0: service ID + * ARG1: bits to clear + * RET0: STATUS + */ +#define HV_FAST_SVC_CLRSTATUS 0x84 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_svc_send(unsigned long svc_id, + unsigned long buffer, + unsigned long buffer_size, + unsigned long *sent_bytes); +extern unsigned long sun4v_svc_recv(unsigned long svc_id, + unsigned long buffer, + unsigned long buffer_size, + unsigned long *recv_bytes); +extern unsigned long sun4v_svc_getstatus(unsigned long svc_id, + unsigned long *status_bits); +extern unsigned long sun4v_svc_setstatus(unsigned long svc_id, + unsigned long status_bits); +extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id, + unsigned long status_bits); +#endif + +/* Trap trace services. + * + * The hypervisor provides a trap tracing capability for privileged + * code running on each virtual CPU. Privileged code provides a + * round-robin trap trace queue within which the hypervisor writes + * 64-byte entries detailing hyperprivileged traps taken n behalf of + * privileged code. This is provided as a debugging capability for + * privileged code. + * + * The trap trace control structure is 64-bytes long and placed at the + * start (offset 0) of the trap trace buffer, and is described as + * follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_control { + unsigned long head_offset; + unsigned long tail_offset; + unsigned long __reserved[0x30 / sizeof(unsigned long)]; +}; +#endif +#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 +#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 + +/* The head offset is the offset of the most recently completed entry + * in the trap-trace buffer. The tail offset is the offset of the + * next entry to be written. The control structure is owned and + * modified by the hypervisor. A guest may not modify the control + * structure contents. Attempts to do so will result in undefined + * behavior for the guest. + * + * Each trap trace buffer entry is layed out as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_entry { + unsigned char type; /* Hypervisor or guest entry? */ + unsigned char hpstate; /* Hyper-privileged state */ + unsigned char tl; /* Trap level */ + unsigned char gl; /* Global register level */ + unsigned short tt; /* Trap type */ + unsigned short tag; /* Extended trap identifier */ + unsigned long tstate; /* Trap state */ + unsigned long tick; /* Tick */ + unsigned long tpc; /* Trap PC */ + unsigned long f1; /* Entry specific */ + unsigned long f2; /* Entry specific */ + unsigned long f3; /* Entry specific */ + unsigned long f4; /* Entry specific */ +}; +#endif +#define HV_TRAP_TRACE_ENTRY_TYPE 0x00 +#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 +#define HV_TRAP_TRACE_ENTRY_TL 0x02 +#define HV_TRAP_TRACE_ENTRY_GL 0x03 +#define HV_TRAP_TRACE_ENTRY_TT 0x04 +#define HV_TRAP_TRACE_ENTRY_TAG 0x06 +#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 +#define HV_TRAP_TRACE_ENTRY_TICK 0x10 +#define HV_TRAP_TRACE_ENTRY_TPC 0x18 +#define HV_TRAP_TRACE_ENTRY_F1 0x20 +#define HV_TRAP_TRACE_ENTRY_F2 0x28 +#define HV_TRAP_TRACE_ENTRY_F3 0x30 +#define HV_TRAP_TRACE_ENTRY_F4 0x38 + +/* The type field is encoded as follows. */ +#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ +#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ +#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ + +/* ttrace_buf_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_CONF + * ARG0: real address + * ARG1: number of entries + * RET0: status + * RET1: number of entries + * ERRORS: ENORADDR Invalid real address + * EINVAL Size is too small + * EBADALIGN Real address not aligned on 64-byte boundary + * + * Requests hypervisor trap tracing and declares a virtual CPU's trap + * trace buffer to the hypervisor. The real address supplies the real + * base address of the trap trace queue and must be 64-byte aligned. + * Specifying a value of 0 for the number of entries disables trap + * tracing for the calling virtual CPU. The buffer allocated must be + * sized for a power of two number of 64-byte trap trace entries plus + * an initial 64-byte control structure. + * + * This may be invoked any number of times so that a virtual CPU may + * relocate a trap trace buffer or create "snapshots" of information. + * + * If the real address is illegal or badly aligned, then trap tracing + * is disabled and an error is returned. + * + * Upon failure with EINVAL, this service call returns in RET1 the + * minimum number of buffer entries required. Upon other failures + * RET1 is undefined. + */ +#define HV_FAST_TTRACE_BUF_CONF 0x90 + +/* ttrace_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_INFO + * RET0: status + * RET1: real address + * RET2: size + * ERRORS: None defined. + * + * Returns the size and location of the previously declared trap-trace + * buffer. In the event that no buffer was previously defined, or the + * buffer is disabled, this call will return a size of zero bytes. + */ +#define HV_FAST_TTRACE_BUF_INFO 0x91 + +/* ttrace_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_ENABLE + * ARG0: enable + * RET0: status + * RET1: previous enable state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Enable or disable trap tracing, and return the previous enabled + * state in RET1. Future systems may define various flags for the + * enable argument (ARG0), for the moment a guest should pass + * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all + * tracing - which will ensure future compatability. + */ +#define HV_FAST_TTRACE_ENABLE 0x92 + +/* ttrace_freeze() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_FREEZE + * ARG0: freeze + * RET0: status + * RET1: previous freeze state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Freeze or unfreeze trap tracing, returning the previous freeze + * state in RET1. A guest should pass a non-zero value to freeze and + * a zero value to unfreeze all tracing. The returned previous state + * is 0 for not frozen and 1 for frozen. + */ +#define HV_FAST_TTRACE_FREEZE 0x93 + +/* ttrace_addentry() + * TRAP: HV_TTRACE_ADDENTRY_TRAP + * ARG0: tag (16-bits) + * ARG1: data word 0 + * ARG2: data word 1 + * ARG3: data word 2 + * ARG4: data word 3 + * RET0: status + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 + * is modified - none of the other registers holding arguments are + * volatile across this hypervisor service. + */ + +/* Core dump services. + * + * Since the hypervisor viraulizes and thus obscures a lot of the + * physical machine layout and state, traditional OS crash dumps can + * be difficult to diagnose especially when the problem is a + * configuration error of some sort. + * + * The dump services provide an opaque buffer into which the + * hypervisor can place it's internal state in order to assist in + * debugging such situations. The contents are opaque and extremely + * platform and hypervisor implementation specific. The guest, during + * a core dump, requests that the hypervisor update any information in + * the dump buffer in preparation to being dumped as part of the + * domain's memory image. + */ + +/* dump_buf_update() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_UPDATE + * ARG0: real address + * ARG1: size + * RET0: status + * RET1: required size of dump buffer + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address is not aligned on a 64-byte + * boundary + * EINVAL Size is non-zero but less than minimum size + * required + * ENOTSUPPORTED Operation not supported on current logical + * domain + * + * Declare a domain dump buffer to the hypervisor. The real address + * provided for the domain dump buffer must be 64-byte aligned. The + * size specifies the size of the dump buffer and may be larger than + * the minimum size specified in the machine description. The + * hypervisor will fill the dump buffer with opaque data. + * + * Note: A guest may elect to include dump buffer contents as part of a crash + * dump to assist with debugging. This function may be called any number + * of times so that a guest may relocate a dump buffer, or create + * "snapshots" of any dump-buffer information. Each call to + * dump_buf_update() atomically declares the new dump buffer to the + * hypervisor. + * + * A specified size of 0 unconfigures the dump buffer. If the real + * address is illegal or badly aligned, then any currently active dump + * buffer is disabled and an error is returned. + * + * In the event that the call fails with EINVAL, RET1 contains the + * minimum size requires by the hypervisor for a valid dump buffer. + */ +#define HV_FAST_DUMP_BUF_UPDATE 0x94 + +/* dump_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_INFO + * RET0: status + * RET1: real address of current dump buffer + * RET2: size of current dump buffer + * ERRORS: No errors defined. + * + * Return the currently configures dump buffer description. A + * returned size of 0 bytes indicates an undefined dump buffer. In + * this case the return address in RET1 is undefined. + */ +#define HV_FAST_DUMP_BUF_INFO 0x95 + +/* Device interrupt services. + * + * Device interrupts are allocated to system bus bridges by the hypervisor, + * and described to OBP in the machine description. OBP then describes + * these interrupts to the OS via properties in the device tree. + * + * Terminology: + * + * cpuid Unique opaque value which represents a target cpu. + * + * devhandle Device handle. It uniquely identifies a device, and + * consistes of the lower 28-bits of the hi-cell of the + * first entry of the device's "reg" property in the + * OBP device tree. + * + * devino Device interrupt number. Specifies the relative + * interrupt number within the device. The unique + * combination of devhandle and devino are used to + * identify a specific device interrupt. + * + * Note: The devino value is the same as the values in the + * "interrupts" property or "interrupt-map" property + * in the OBP device tree for that device. + * + * sysino System interrupt number. A 64-bit unsigned interger + * representing a unique interrupt within a virtual + * machine. + * + * intr_state A flag representing the interrupt state for a given + * sysino. The state values are defined below. + * + * intr_enabled A flag representing the 'enabled' state for a given + * sysino. The enable values are defined below. + */ + +#define HV_INTR_STATE_IDLE 0 /* Nothing pending */ +#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ +#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ + +#define HV_INTR_DISABLED 0 /* sysino not enabled */ +#define HV_INTR_ENABLED 1 /* sysino enabled */ + +/* intr_devino_to_sysino() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO + * ARG0: devhandle + * ARG1: devino + * RET0: status + * RET1: sysino + * ERRORS: EINVAL Invalid devhandle/devino + * + * Converts a device specific interrupt number of the given + * devhandle/devino into a system specific ino (sysino). + */ +#define HV_FAST_INTR_DEVINO2SYSINO 0xa0 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle, + unsigned long devino); +#endif + +/* intr_getenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETENABLED + * ARG0: sysino + * RET0: status + * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * ERRORS: EINVAL Invalid sysino + * + * Returns interrupt enabled state in RET1 for the interrupt defined + * by the given sysino. + */ +#define HV_FAST_INTR_GETENABLED 0xa1 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getenabled(unsigned long sysino); +#endif + +/* intr_setenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETENABLED + * ARG0: sysino + * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_enabled value + * + * Set the 'enabled' state of the interrupt sysino. + */ +#define HV_FAST_INTR_SETENABLED 0xa2 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled); +#endif + +/* intr_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETSTATE + * ARG0: sysino + * RET0: status + * RET1: intr_state (HV_INTR_STATE_*) + * ERRORS: EINVAL Invalid sysino + * + * Returns current state of the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_GETSTATE 0xa3 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getstate(unsigned long sysino); +#endif + +/* intr_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETSTATE + * ARG0: sysino + * ARG1: intr_state (HV_INTR_STATE_*) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_state value + * + * Sets the current state of the interrupt described by the given sysino + * value. + * + * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending + * interrupt for sysino. + */ +#define HV_FAST_INTR_SETSTATE 0xa4 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state); +#endif + +/* intr_gettarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETTARGET + * ARG0: sysino + * RET0: status + * RET1: cpuid + * ERRORS: EINVAL Invalid sysino + * + * Returns CPU that is the current target of the interrupt defined by + * the given sysino. The CPU value returned is undefined if the target + * has not been set via intr_settarget(). + */ +#define HV_FAST_INTR_GETTARGET 0xa5 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_gettarget(unsigned long sysino); +#endif + +/* intr_settarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETTARGET + * ARG0: sysino + * ARG1: cpuid + * RET0: status + * ERRORS: EINVAL Invalid sysino + * ENOCPU Invalid cpuid + * + * Set the target CPU for the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_SETTARGET 0xa6 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); +#endif + +/* vintr_get_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_COOKIE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cookie + */ +#define HV_FAST_VINTR_GET_COOKIE 0xa7 + +/* vintr_set_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_COOKIE + * ARG0: device handle + * ARG1: device ino + * ARG2: cookie + * RET0: status + */ +#define HV_FAST_VINTR_SET_COOKIE 0xa8 + +/* vintr_get_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_VALID + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: valid state + */ +#define HV_FAST_VINTR_GET_VALID 0xa9 + +/* vintr_set_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_VALID + * ARG0: device handle + * ARG1: device ino + * ARG2: valid state + * RET0: status + */ +#define HV_FAST_VINTR_SET_VALID 0xaa + +/* vintr_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_STATE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: state + */ +#define HV_FAST_VINTR_GET_STATE 0xab + +/* vintr_set_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_STATE + * ARG0: device handle + * ARG1: device ino + * ARG2: state + * RET0: status + */ +#define HV_FAST_VINTR_SET_STATE 0xac + +/* vintr_get_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_TARGET + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cpuid + */ +#define HV_FAST_VINTR_GET_TARGET 0xad + +/* vintr_set_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_TARGET + * ARG0: device handle + * ARG1: device ino + * ARG2: cpuid + * RET0: status + */ +#define HV_FAST_VINTR_SET_TARGET 0xae + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cookie); +extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cookie); +extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *valid); +extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long valid); +extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *state); +extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long state); +extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cpuid); +extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cpuid); +#endif + +/* PCI IO services. + * + * See the terminology descriptions in the device interrupt services + * section above as those apply here too. Here are terminology + * definitions specific to these PCI IO services: + * + * tsbnum TSB number. Indentifies which io-tsb is used. + * For this version of the specification, tsbnum + * must be zero. + * + * tsbindex TSB index. Identifies which entry in the TSB + * is used. The first entry is zero. + * + * tsbid A 64-bit aligned data structure which contains + * a tsbnum and a tsbindex. Bits 63:32 contain the + * tsbnum and bits 31:00 contain the tsbindex. + * + * Use the HV_PCI_TSBID() macro to construct such + * values. + * + * io_attributes IO attributes for IOMMU mappings. One of more + * of the attritbute bits are stores in a 64-bit + * value. The values are defined below. + * + * r_addr 64-bit real address + * + * pci_device PCI device address. A PCI device address identifies + * a specific device on a specific PCI bus segment. + * A PCI device address ia a 32-bit unsigned integer + * with the following format: + * + * 00000000.bbbbbbbb.dddddfff.00000000 + * + * Use the HV_PCI_DEVICE_BUILD() macro to construct + * such values. + * + * pci_config_offset + * PCI configureation space offset. For conventional + * PCI a value between 0 and 255. For extended + * configuration space, a value between 0 and 4095. + * + * Note: For PCI configuration space accesses, the offset + * must be aligned to the access size. + * + * error_flag A return value which specifies if the action succeeded + * or failed. 0 means no error, non-0 means some error + * occurred while performing the service. + * + * io_sync_direction + * Direction definition for pci_dma_sync(), defined + * below in HV_PCI_SYNC_*. + * + * io_page_list A list of io_page_addresses, an io_page_address is + * a real address. + * + * io_page_list_p A pointer to an io_page_list. + * + * "size based byte swap" - Some functions do size based byte swapping + * which allows sw to access pointers and + * counters in native form when the processor + * operates in a different endianness than the + * IO bus. Size-based byte swapping converts a + * multi-byte field between big-endian and + * little-endian format. + */ + +#define HV_PCI_MAP_ATTR_READ 0x01 +#define HV_PCI_MAP_ATTR_WRITE 0x02 + +#define HV_PCI_DEVICE_BUILD(b,d,f) \ + ((((b) & 0xff) << 16) | \ + (((d) & 0x1f) << 11) | \ + (((f) & 0x07) << 8)) + +#define HV_PCI_TSBID(__tsb_num, __tsb_index) \ + ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index))) + +#define HV_PCI_SYNC_FOR_DEVICE 0x01 +#define HV_PCI_SYNC_FOR_CPU 0x02 + +/* pci_iommu_map() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_MAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * ARG3: io_attributes + * ARG4: io_page_list_p + * RET0: status + * RET1: #ttes mapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes + * EBADALIGN Improperly aligned real address + * ENORADDR Invalid real address + * + * Create IOMMU mappings in the sun4v device defined by the given + * devhandle. The mappings are created in the TSB defined by the + * tsbnum component of the given tsbid. The first mapping is created + * in the TSB i ndex defined by the tsbindex component of the given tsbid. + * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, + * the second at tsbnum, tsbindex + 1, etc. + * + * All mappings are created with the attributes defined by the io_attributes + * argument. The page mapping addresses are described in the io_page_list + * defined by the given io_page_list_p, which is a pointer to the io_page_list. + * The first entry in the io_page_list is the address for the first iotte, the + * 2nd for the 2nd iotte, and so on. + * + * Each io_page_address in the io_page_list must be appropriately aligned. + * #ttes must be greater than zero. For this version of the spec, the tsbnum + * component of the given tsbid must be zero. + * + * Returns the actual number of mappings creates, which may be less than + * or equal to the argument #ttes. If the function returns a value which + * is less than the #ttes, the caller may continus to call the function with + * an updated tsbid, #ttes, io_page_list_p arguments until all pages are + * mapped. + * + * Note: This function does not imply an iotte cache flush. The guest must + * demap an entry before re-mapping it. + */ +#define HV_FAST_PCI_IOMMU_MAP 0xb0 + +/* pci_iommu_demap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * RET0: status + * RET1: #ttes demapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * + * Demap and flush IOMMU mappings in the device defined by the given + * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum + * component of the given tsbid, starting at the TSB index defined by the + * tsbindex component of the given tsbid. + * + * For this version of the spec, the tsbnum of the given tsbid must be zero. + * #ttes must be greater than zero. + * + * Returns the actual number of ttes demapped, which may be less than or equal + * to the argument #ttes. If #ttes demapped is less than #ttes, the caller + * may continue to call this function with updated tsbid and #ttes arguments + * until all pages are demapped. + * + * Note: Entries do not have to be mapped to be demapped. A demap of an + * unmapped page will flush the entry from the tte cache. + */ +#define HV_FAST_PCI_IOMMU_DEMAP 0xb1 + +/* pci_iommu_getmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP + * ARG0: devhandle + * ARG1: tsbid + * RET0: status + * RET1: io_attributes + * RET2: real address + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * ENOMAP Mapping is not valid, no translation exists + * + * Read and return the mapping in the device described by the given devhandle + * and tsbid. If successful, the io_attributes shall be returned in RET1 + * and the page address of the mapping shall be returned in RET2. + * + * For this version of the spec, the tsbnum component of the given tsbid + * must be zero. + */ +#define HV_FAST_PCI_IOMMU_GETMAP 0xb2 + +/* pci_iommu_getbypass() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS + * ARG0: devhandle + * ARG1: real address + * ARG2: io_attributes + * RET0: status + * RET1: io_addr + * ERRORS: EINVAL Invalid devhandle/io_attributes + * ENORADDR Invalid real address + * ENOTSUPPORTED Function not supported in this implementation. + * + * Create a "special" mapping in the device described by the given devhandle, + * for the given real address and attributes. Return the IO address in RET1 + * if successful. + */ +#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 + +/* pci_config_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_GET + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Read PCI configuration space for the adapter described by the given + * devhandle. Read size (1, 2, or 4) bytes of data from the given + * pci_device, at pci_config_offset from the beginning of the device's + * configuration space. If there was no error, RET1 is set to zero and + * RET2 is set to the data read. Insignificant bits in RET2 are not + * guarenteed to have any specific value and therefore must be ignored. + * + * The data returned in RET2 is size based byte swapped. + * + * If an error occurs during the read, set RET1 to a non-zero value. The + * given pci_config_offset must be 'size' aligned. + */ +#define HV_FAST_PCI_CONFIG_GET 0xb4 + +/* pci_config_put() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_PUT + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * ARG4: data + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Write PCI configuration space for the adapter described by the given + * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, + * at pci_config_offset from the beginning of the device's configuration + * space. The data argument contains the data to be written to configuration + * space. Prior to writing, the data is size based byte swapped. + * + * If an error occurs during the write access, do not generate an error + * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. + * The given pci_config_offset must be 'size' aligned. + * + * This function is permitted to read from offset zero in the configuration + * space described by the given pci_device if necessary to ensure that the + * write access to config space completes. + */ +#define HV_FAST_PCI_CONFIG_PUT 0xb5 + +/* pci_peek() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_PEEK + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle or size + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * + * Attempt to read the IO address given by the given devhandle, real address, + * and size. Size must be 1, 2, 4, or 8. The read is performed as a single + * access operation using the given size. If an error occurs when reading + * from the given location, do not generate an error report, but return a + * non-zero value in RET1. If the read was successful, return zero in RET1 + * and return the actual data read in RET2. The data returned is size based + * byte swapped. + * + * Non-significant bits in RET2 are not guarenteed to have any specific value + * and therefore must be ignored. If RET1 is returned as non-zero, the data + * value is not guarenteed to have any specific value and should be ignored. + * + * The caller must have permission to read from the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_PEEK 0xb6 + +/* pci_poke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_POKE + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: data + * ARG4: pci_device + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle, size, or pci_device + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * ENOTSUPPORTED Function is not supported by implementation + * + * Attempt to write data to the IO address given by the given devhandle, + * real address, and size. Size must be 1, 2, 4, or 8. The write is + * performed as a single access operation using the given size. Prior to + * writing the data is size based swapped. + * + * If an error occurs when writing to the given location, do not generate an + * error report, but return a non-zero value in RET1. If the write was + * successful, return zero in RET1. + * + * pci_device describes the configuration address of the device being + * written to. The implementation may safely read from offset 0 with + * the configuration space of the device described by devhandle and + * pci_device in order to guarantee that the write portion of the operation + * completes + * + * Any error that occurs due to the read shall be reported using the normal + * error reporting mechanisms .. the read error is not suppressed. + * + * The caller must have permission to write to the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. The caller must have permission to read from + * the given devhandle, pci_device cofiguration space offset 0. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_POKE 0xb7 + +/* pci_dma_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_DMA_SYNC + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: io_sync_direction + * RET0: status + * RET1: #synced + * ERRORS: EINVAL Invalid devhandle or io_sync_direction + * ENORADDR Bad real address + * + * Synchronize a memory region described by the given real address and size, + * for the device defined by the given devhandle using the direction(s) + * defined by the given io_sync_direction. The argument size is the size of + * the memory region in bytes. + * + * Return the actual number of bytes synchronized in the return value #synced, + * which may be less than or equal to the argument size. If the return + * value #synced is less than size, the caller must continue to call this + * function with updated real address and size arguments until the entire + * memory region is synchronized. + */ +#define HV_FAST_PCI_DMA_SYNC 0xb8 + +/* PCI MSI services. */ + +#define HV_MSITYPE_MSI32 0x00 +#define HV_MSITYPE_MSI64 0x01 + +#define HV_MSIQSTATE_IDLE 0x00 +#define HV_MSIQSTATE_ERROR 0x01 + +#define HV_MSIQ_INVALID 0x00 +#define HV_MSIQ_VALID 0x01 + +#define HV_MSISTATE_IDLE 0x00 +#define HV_MSISTATE_DELIVERED 0x01 + +#define HV_MSIVALID_INVALID 0x00 +#define HV_MSIVALID_VALID 0x01 + +#define HV_PCIE_MSGTYPE_PME_MSG 0x18 +#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b +#define HV_PCIE_MSGTYPE_CORR_MSG 0x30 +#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 +#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 + +#define HV_MSG_INVALID 0x00 +#define HV_MSG_VALID 0x01 + +/* pci_msiq_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_CONF + * ARG0: devhandle + * ARG1: msiqid + * ARG2: real address + * ARG3: number of entries + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msiqid or nentries + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * + * Configure the MSI queue given by the devhandle and msiqid arguments, + * and to be placed at the given real address and be of the given + * number of entries. The real address must be aligned exactly to match + * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry + * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ + * Head and Tail are initialized so that the MSI-EQ is 'empty'. + * + * Implementation Note: Certain implementations have fixed sized queues. In + * that case, number of entries must contain the correct + * value. + */ +#define HV_FAST_PCI_MSIQ_CONF 0xc0 + +/* pci_msiq_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_INFO + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: real address + * RET2: number of entries + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Return the configuration information for the MSI queue described + * by the given devhandle and msiqid. The base address of the queue + * is returned in ARG1 and the number of entries is returned in ARG2. + * If the queue is unconfigured, the real address is undefined and the + * number of entries will be returned as zero. + */ +#define HV_FAST_PCI_MSIQ_INFO 0xc1 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the valid state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETVALID 0xc2 + +/* pci_msiq_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid + * value or MSI EQ is uninitialized + * + * Set the valid state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETVALID 0xc3 + +/* pci_msiq_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate + * value or MSI EQ is uninitialized + * + * Set the state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 + +/* pci_msiq_gethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqhead + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 + +/* pci_msiq_sethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqhead + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, + * or MSI EQ is uninitialized + * + * Set the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 + +/* pci_msiq_gettail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqtail + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue tail for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 + +/* pci_msi_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETVALID + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msivalidstate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_GETVALID 0xc9 + +/* pci_msi_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETVALID + * ARG0: devhandle + * ARG1: msinum + * ARG2: msivalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate + * + * Set the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETVALID 0xca + +/* pci_msi_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound + * + * Get the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_GETMSIQ 0xcb + +/* pci_msi_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ + * ARG0: devhandle + * ARG1: msinum + * ARG2: msitype + * ARG3: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msiqid + * + * Set the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_SETMSIQ 0xcc + +/* pci_msi_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETSTATE + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msistate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the state of the MSI defined by the given devhandle and msinum. + * If not initialized, return HV_MSISTATE_IDLE. + */ +#define HV_FAST_PCI_MSI_GETSTATE 0xcd + +/* pci_msi_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETSTATE + * ARG0: devhandle + * ARG1: msinum + * ARG2: msistate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msistate + * + * Set the state of the MSI defined by the given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETSTATE 0xce + +/* pci_msg_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETMSIQ 0xd0 + +/* pci_msg_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid + * + * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETMSIQ 0xd1 + +/* pci_msg_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETVALID + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msgvalidstate + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETVALID 0xd2 + +/* pci_msg_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETVALID + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msgvalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate + * + * Set the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETVALID 0xd3 + +/* Logical Domain Channel services. */ + +#define LDC_CHANNEL_DOWN 0 +#define LDC_CHANNEL_UP 1 +#define LDC_CHANNEL_RESETTING 2 + +/* ldc_tx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure transmit queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * Upon configuration of a valid transmit queue the head and tail + * pointers are set to a hypervisor specific identical value indicating + * that the queue initially is empty. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. A transmit queue may be + * specified even in the event that the LDC is down (peer endpoint has no + * receive queue specified). Transmission will begin as soon as the peer + * endpoint defines a receive queue. + * + * It is recommended that a guest wait for a transmit queue to empty prior + * to reconfiguring it, or un-configuring it. Re or un-configuring of a + * non-empty transmit queue behaves exactly as defined above, however it + * is undefined as to how many of the pending entries in the original queue + * will be delivered prior to the re-configuration taking effect. + * Furthermore, as the queue configuration causes a reset of the head and + * tail pointers there is no way for a guest to determine how many entries + * have been sent after the configuration operation. + */ +#define HV_FAST_LDC_TX_QCONF 0xe0 + +/* ldc_tx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the transmit queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no transmit + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_TX_QINFO 0xe1 + +/* ldc_tx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the transmit state, and the head and tail queue pointers, for + * the transmit queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the transmit queue for the specified endpoint. + */ +#define HV_FAST_LDC_TX_GET_STATE 0xe2 + +/* ldc_tx_set_qtail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL + * ARG0: channel ID + * ARG1: tail offset + * RET0: status + * + * Update the tail pointer for the transmit queue associated with the LDC + * endpoint defined by the given channel ID. The tail offset specified + * must be aligned on a 64 byte boundary, and calculated so as to increase + * the number of pending entries on the transmit queue. Any attempt to + * decrease the number of pending transmit queue entires is considered + * an invalid tail offset and will result in an EINVAL error. + * + * Since the tail of the transmit queue may not be moved backwards, the + * transmit queue may be flushed by configuring a new transmit queue, + * whereupon the hypervisor will configure the initial transmit head and + * tail pointers to be equal. + */ +#define HV_FAST_LDC_TX_SET_QTAIL 0xe3 + +/* ldc_rx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure receive queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * If a valid receive queue is specified for a local endpoint the LDC is + * in the up state for the purpose of transmission to this endpoint. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. + * + * As receive queue configuration causes a reset of the queue's head and + * tail pointers there is no way for a gues to determine how many entries + * have been received between a preceeding ldc_get_rx_state() API call + * and the completion of the configuration operation. It should be noted + * that datagram delivery is not guarenteed via domain channels anyway, + * and therefore any higher protocol should be resilient to datagram + * loss if necessary. However, to overcome this specific race potential + * it is recommended, for example, that a higher level protocol be employed + * to ensure either retransmission, or ensure that no datagrams are pending + * on the peer endpoint's transmit queue prior to the configuration process. + */ +#define HV_FAST_LDC_RX_QCONF 0xe4 + +/* ldc_rx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the receive queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no receive + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_RX_QINFO 0xe5 + +/* ldc_rx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the receive state, and the head and tail queue pointers, for + * the receive queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the receive queue for the specified endpoint. + */ +#define HV_FAST_LDC_RX_GET_STATE 0xe6 + +/* ldc_rx_set_qhead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD + * ARG0: channel ID + * ARG1: head offset + * RET0: status + * + * Update the head pointer for the receive queue associated with the LDC + * endpoint defined by the given channel ID. The head offset specified + * must be aligned on a 64 byte boundary, and calculated so as to decrease + * the number of pending entries on the receive queue. Any attempt to + * increase the number of pending receive queue entires is considered + * an invalid head offset and will result in an EINVAL error. + * + * The receive queue may be flushed by setting the head offset equal + * to the current tail offset. + */ +#define HV_FAST_LDC_RX_SET_QHEAD 0xe7 + +/* LDC Map Table Entry. Each slot is defined by a translation table + * entry, as specified by the LDC_MTE_* bits below, and a 64-bit + * hypervisor invalidation cookie. + */ +#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */ +#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */ +#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */ +#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */ +#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */ +#define LDC_MTE_EXEC 0x0000000000000040 /* execute */ +#define LDC_MTE_WRITE 0x0000000000000020 /* read */ +#define LDC_MTE_READ 0x0000000000000010 /* write */ +#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */ +#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */ +#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */ +#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */ +#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */ +#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */ +#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */ +#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */ +#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */ + +#ifndef __ASSEMBLY__ +struct ldc_mtable_entry { + unsigned long mte; + unsigned long cookie; +}; +#endif + +/* ldc_set_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE + * ARG0: channel ID + * ARG1: table real address + * ARG2: num entries + * RET0: status + * + * Register the MTE table at the given table real address, with the + * specified num entries, for the LDC indicated by the given channel + * ID. + */ +#define HV_FAST_LDC_SET_MAP_TABLE 0xea + +/* ldc_get_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE + * ARG0: channel ID + * RET0: status + * RET1: table real address + * RET2: num entries + * + * Return the configuration of the current mapping table registered + * for the given channel ID. + */ +#define HV_FAST_LDC_GET_MAP_TABLE 0xeb + +#define LDC_COPY_IN 0 +#define LDC_COPY_OUT 1 + +/* ldc_copy() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_COPY + * ARG0: channel ID + * ARG1: LDC_COPY_* direction code + * ARG2: target real address + * ARG3: local real address + * ARG4: length in bytes + * RET0: status + * RET1: actual length in bytes + */ +#define HV_FAST_LDC_COPY 0xec + +#define LDC_MEM_READ 1 +#define LDC_MEM_WRITE 2 +#define LDC_MEM_EXEC 4 + +/* ldc_mapin() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_MAPIN + * ARG0: channel ID + * ARG1: cookie + * RET0: status + * RET1: real address + * RET2: LDC_MEM_* permissions + */ +#define HV_FAST_LDC_MAPIN 0xed + +/* ldc_unmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_UNMAP + * ARG0: real address + * RET0: status + */ +#define HV_FAST_LDC_UNMAP 0xee + +/* ldc_revoke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_REVOKE + * ARG0: channel ID + * ARG1: cookie + * ARG2: ldc_mtable_entry cookie + * RET0: status + */ +#define HV_FAST_LDC_REVOKE 0xef + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel, + unsigned long tail_off); +extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel, + unsigned long head_off); +extern unsigned long sun4v_ldc_set_map_table(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_get_map_table(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_copy(unsigned long channel, + unsigned long dir_code, + unsigned long tgt_raddr, + unsigned long lcl_raddr, + unsigned long len, + unsigned long *actual_len); +extern unsigned long sun4v_ldc_mapin(unsigned long channel, + unsigned long cookie, + unsigned long *ra, + unsigned long *perm); +extern unsigned long sun4v_ldc_unmap(unsigned long ra); +extern unsigned long sun4v_ldc_revoke(unsigned long channel, + unsigned long cookie, + unsigned long mte_cookie); +#endif + +/* Performance counter services. */ + +#define HV_PERF_JBUS_PERF_CTRL_REG 0x00 +#define HV_PERF_JBUS_PERF_CNT_REG 0x01 +#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 +#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 +#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 +#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 +#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 +#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 +#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 +#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 + +/* get_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_GET_PERFREG + * ARG0: performance reg number + * RET0: status + * RET1: performance reg value + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Read the value of the given DRAM/JBUS performance counter/control register. + */ +#define HV_FAST_GET_PERFREG 0x100 + +/* set_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SET_PERFREG + * ARG0: performance reg number + * ARG1: performance reg value + * RET0: status + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Write the given performance reg value to the given DRAM/JBUS + * performance counter/control register. + */ +#define HV_FAST_SET_PERFREG 0x101 + +/* MMU statistics services. + * + * The hypervisor maintains MMU statistics and privileged code provides + * a buffer where these statistics can be collected. It is continually + * updated once configured. The layout is as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_mmu_statistics { + unsigned long immu_tsb_hits_ctx0_8k_tte; + unsigned long immu_tsb_ticks_ctx0_8k_tte; + unsigned long immu_tsb_hits_ctx0_64k_tte; + unsigned long immu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved1[2]; + unsigned long immu_tsb_hits_ctx0_4mb_tte; + unsigned long immu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved2[2]; + unsigned long immu_tsb_hits_ctx0_256mb_tte; + unsigned long immu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved3[4]; + unsigned long immu_tsb_hits_ctxnon0_8k_tte; + unsigned long immu_tsb_ticks_ctxnon0_8k_tte; + unsigned long immu_tsb_hits_ctxnon0_64k_tte; + unsigned long immu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved4[2]; + unsigned long immu_tsb_hits_ctxnon0_4mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved5[2]; + unsigned long immu_tsb_hits_ctxnon0_256mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved6[4]; + unsigned long dmmu_tsb_hits_ctx0_8k_tte; + unsigned long dmmu_tsb_ticks_ctx0_8k_tte; + unsigned long dmmu_tsb_hits_ctx0_64k_tte; + unsigned long dmmu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved7[2]; + unsigned long dmmu_tsb_hits_ctx0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved8[2]; + unsigned long dmmu_tsb_hits_ctx0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved9[4]; + unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; + unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved10[2]; + unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved11[2]; + unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved12[4]; +}; +#endif + +/* mmustat_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_CONF + * ARG0: real address + * RET0: status + * RET1: real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address not aligned on 64-byte boundary + * EBADTRAP API not supported on this processor + * + * Enable MMU statistic gathering using the buffer at the given real + * address on the current virtual CPU. The new buffer real address + * is given in ARG1, and the previously specified buffer real address + * is returned in RET1, or is returned as zero for the first invocation. + * + * If the passed in real address argument is zero, this will disable + * MMU statistic collection on the current virtual CPU. If an error is + * returned then no statistics are collected. + * + * The buffer contents should be initialized to all zeros before being + * given to the hypervisor or else the statistics will be meaningless. + */ +#define HV_FAST_MMUSTAT_CONF 0x102 + +/* mmustat_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_INFO + * RET0: status + * RET1: real address + * ERRORS: EBADTRAP API not supported on this processor + * + * Return the current state and real address of the currently configured + * MMU statistics buffer on the current virtual CPU. + */ +#define HV_FAST_MMUSTAT_INFO 0x103 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra); +extern unsigned long sun4v_mmustat_info(unsigned long *ra); +#endif + +/* NCS crypto services */ + +/* ncs_request() sub-function numbers */ +#define HV_NCS_QCONF 0x01 +#define HV_NCS_QTAIL_UPDATE 0x02 + +#ifndef __ASSEMBLY__ +struct hv_ncs_queue_entry { + /* MAU Control Register */ + unsigned long mau_control; +#define MAU_CONTROL_INV_PARITY 0x0000000000002000 +#define MAU_CONTROL_STRAND 0x0000000000001800 +#define MAU_CONTROL_BUSY 0x0000000000000400 +#define MAU_CONTROL_INT 0x0000000000000200 +#define MAU_CONTROL_OP 0x00000000000001c0 +#define MAU_CONTROL_OP_SHIFT 6 +#define MAU_OP_LOAD_MA_MEMORY 0x0 +#define MAU_OP_STORE_MA_MEMORY 0x1 +#define MAU_OP_MODULAR_MULT 0x2 +#define MAU_OP_MODULAR_REDUCE 0x3 +#define MAU_OP_MODULAR_EXP_LOOP 0x4 +#define MAU_CONTROL_LEN 0x000000000000003f +#define MAU_CONTROL_LEN_SHIFT 0 + + /* Real address of bytes to load or store bytes + * into/out-of the MAU. + */ + unsigned long mau_mpa; + + /* Modular Arithmetic MA Offset Register. */ + unsigned long mau_ma; + + /* Modular Arithmetic N Prime Register. */ + unsigned long mau_np; +}; + +struct hv_ncs_qconf_arg { + unsigned long mid; /* MAU ID, 1 per core on Niagara */ + unsigned long base; /* Real address base of queue */ + unsigned long end; /* Real address end of queue */ + unsigned long num_ents; /* Number of entries in queue */ +}; + +struct hv_ncs_qtail_update_arg { + unsigned long mid; /* MAU ID, 1 per core on Niagara */ + unsigned long tail; /* New tail index to use */ + unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */ +#define HV_NCS_SYNCFLAG_SYNC 0x00 +#define HV_NCS_SYNCFLAG_ASYNC 0x01 +}; +#endif + +/* ncs_request() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_NCS_REQUEST + * ARG0: NCS sub-function + * ARG1: sub-function argument real address + * ARG2: size in bytes of sub-function argument + * RET0: status + * + * The MAU chip of the Niagara processor is not directly accessible + * to privileged code, instead it is programmed indirectly via this + * hypervisor API. + * + * The interfaces defines a queue of MAU operations to perform. + * Privileged code registers a queue with the hypervisor by invoking + * this HVAPI with the HV_NCS_QCONF sub-function, which defines the + * base, end, and number of entries of the queue. Each queue entry + * contains a MAU register struct block. + * + * The privileged code then proceeds to add entries to the queue and + * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only + * synchronous operations are supported by the current hypervisor, + * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to + * completion and return HV_EOK, or return an error code. + * + * The real address of the sub-function argument must be aligned on at + * least an 8-byte boundary. + * + * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte + * offset, into the queue and must be less than or equal the 'num_ents' + * argument given in the HV_NCS_QCONF call. + */ +#define HV_FAST_NCS_REQUEST 0x110 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_ncs_request(unsigned long request, + unsigned long arg_ra, + unsigned long arg_size); +#endif + +#define HV_FAST_FIRE_GET_PERFREG 0x120 +#define HV_FAST_FIRE_SET_PERFREG 0x121 + +/* Function numbers for HV_CORE_TRAP. */ +#define HV_CORE_SET_VER 0x00 +#define HV_CORE_PUTCHAR 0x01 +#define HV_CORE_EXIT 0x02 +#define HV_CORE_GET_VER 0x03 + +/* Hypervisor API groups for use with HV_CORE_SET_VER and + * HV_CORE_GET_VER. + */ +#define HV_GRP_SUN4V 0x0000 +#define HV_GRP_CORE 0x0001 +#define HV_GRP_INTR 0x0002 +#define HV_GRP_SOFT_STATE 0x0003 +#define HV_GRP_PCI 0x0100 +#define HV_GRP_LDOM 0x0101 +#define HV_GRP_SVC_CHAN 0x0102 +#define HV_GRP_NCS 0x0103 +#define HV_GRP_NIAG_PERF 0x0200 +#define HV_GRP_FIRE_PERF 0x0201 +#define HV_GRP_DIAG 0x0300 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_get_version(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern unsigned long sun4v_set_version(unsigned long group, + unsigned long major, + unsigned long minor, + unsigned long *actual_minor); + +extern int sun4v_hvapi_register(unsigned long group, unsigned long major, + unsigned long *minor); +extern void sun4v_hvapi_unregister(unsigned long group); +extern int sun4v_hvapi_get(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern void sun4v_hvapi_init(void); +#endif + +#endif /* !(_SPARC64_HYPERVISOR_H) */ -- cgit v1.2.3