From f10378fff658f61307496e0ae00095041725cf07 Mon Sep 17 00:00:00 2001 From: Markus Lidel Date: Thu, 23 Jun 2005 22:02:16 -0700 Subject: [PATCH] I2O: new sysfs attributes and Adaptec specific block device access and 64-bit DMA support Changes: - Added Bus-OSM which could be used by user space programs to reset a channel on the controller - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and move those to its own file - Added sysfs attribute for firmware read and write access for I2O controllers - Added special handling of firmware read and write access for Adaptec controllers - Added vendor id and product id as sysfs-attribute to Executive classes - Added automatic notification of LCT change handling to Exec-OSM - Added flushing function to Block-OSM for later barrier implementation - Use PRIVATE messages for Block access on Adaptec controllers, which are faster then BLOCK class access - Cleaned up support for Promise controller - New messages are now detected using the IRQ status register as suggested by the I2O spec - Added i2o_dma_high() and i2o_dma_low() functions - Added facility for SG tablesize calculation when using 32-bit and 64-bit DMA addresses - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the SG list for 32-bit as well as 64-bit DMA addresses Signed-off-by: Markus Lidel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/i2o.h | 321 +++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 265 insertions(+), 56 deletions(-) (limited to 'include/linux/i2o.h') diff --git a/include/linux/i2o.h b/include/linux/i2o.h index e8cd1129001..497ea574f96 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -157,7 +157,8 @@ struct i2o_controller { void __iomem *in_port; /* Inbout port address */ void __iomem *out_port; /* Outbound port address */ - void __iomem *irq_mask; /* Interrupt register address */ + void __iomem *irq_status; /* Interrupt status register address */ + void __iomem *irq_mask; /* Interrupt mask register address */ /* Dynamic LCT related data */ @@ -242,15 +243,6 @@ extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long, extern void i2o_msg_nop(struct i2o_controller *, u32); static inline void i2o_flush_reply(struct i2o_controller *, u32); -/* DMA handling functions */ -static inline int i2o_dma_alloc(struct device *, struct i2o_dma *, size_t, - unsigned int); -static inline void i2o_dma_free(struct device *, struct i2o_dma *); -int i2o_dma_realloc(struct device *, struct i2o_dma *, size_t, unsigned int); - -static inline int i2o_dma_map(struct device *, struct i2o_dma *); -static inline void i2o_dma_unmap(struct device *, struct i2o_dma *); - /* IOP functions */ extern int i2o_status_get(struct i2o_controller *); @@ -275,6 +267,16 @@ static inline u32 i2o_ptr_high(void *ptr) { return (u32) ((u64) ptr >> 32); }; + +static inline u32 i2o_dma_low(dma_addr_t dma_addr) +{ + return (u32) (u64) dma_addr; +}; + +static inline u32 i2o_dma_high(dma_addr_t dma_addr) +{ + return (u32) ((u64) dma_addr >> 32); +}; #else static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr) { @@ -305,8 +307,246 @@ static inline u32 i2o_ptr_high(void *ptr) { return 0; }; + +static inline u32 i2o_dma_low(dma_addr_t dma_addr) +{ + return (u32) dma_addr; +}; + +static inline u32 i2o_dma_high(dma_addr_t dma_addr) +{ + return 0; +}; +#endif + +/** + * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL + * @c: I2O controller for which the calculation should be done + * @body_size: maximum body size used for message in 32-bit words. + * + * Return the maximum number of SG elements in a SG list. + */ +static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size) +{ + i2o_status_block *sb = c->status_block.virt; + u16 sg_count = + (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) - + body_size; + + if (c->pae_support) { + /* + * for 64-bit a SG attribute element must be added and each + * SG element needs 12 bytes instead of 8. + */ + sg_count -= 2; + sg_count /= 3; + } else + sg_count /= 2; + + if (c->short_req && (sg_count > 8)) + sg_count = 8; + + return sg_count; +}; + +/** + * i2o_dma_map_single - Map pointer to controller and fill in I2O message. + * @c: I2O controller + * @ptr: pointer to the data which should be mapped + * @size: size of data in bytes + * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE + * @sg_ptr: pointer to the SG list inside the I2O message + * + * This function does all necessary DMA handling and also writes the I2O + * SGL elements into the I2O message. For details on DMA handling see also + * dma_map_single(). The pointer sg_ptr will only be set to the end of the + * SG list if the allocation was successful. + * + * Returns DMA address which must be checked for failures using + * dma_mapping_error(). + */ +static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, + size_t size, + enum dma_data_direction direction, + u32 __iomem ** sg_ptr) +{ + u32 sg_flags; + u32 __iomem *mptr = *sg_ptr; + dma_addr_t dma_addr; + + switch (direction) { + case DMA_TO_DEVICE: + sg_flags = 0xd4000000; + break; + case DMA_FROM_DEVICE: + sg_flags = 0xd0000000; + break; + default: + return 0; + } + + dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction); + if (!dma_mapping_error(dma_addr)) { +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) { + writel(0x7C020002, mptr++); + writel(PAGE_SIZE, mptr++); + } +#endif + + writel(sg_flags | size, mptr++); + writel(i2o_dma_low(dma_addr), mptr++); +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) + writel(i2o_dma_high(dma_addr), mptr++); +#endif + *sg_ptr = mptr; + } + return dma_addr; +}; + +/** + * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message. + * @c: I2O controller + * @sg: SG list to be mapped + * @sg_count: number of elements in the SG list + * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE + * @sg_ptr: pointer to the SG list inside the I2O message + * + * This function does all necessary DMA handling and also writes the I2O + * SGL elements into the I2O message. For details on DMA handling see also + * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG + * list if the allocation was successful. + * + * Returns 0 on failure or 1 on success. + */ +static inline int i2o_dma_map_sg(struct i2o_controller *c, + struct scatterlist *sg, int sg_count, + enum dma_data_direction direction, + u32 __iomem ** sg_ptr) +{ + u32 sg_flags; + u32 __iomem *mptr = *sg_ptr; + + switch (direction) { + case DMA_TO_DEVICE: + sg_flags = 0x14000000; + break; + case DMA_FROM_DEVICE: + sg_flags = 0x10000000; + break; + default: + return 0; + } + + sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction); + if (!sg_count) + return 0; + +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) { + writel(0x7C020002, mptr++); + writel(PAGE_SIZE, mptr++); + } #endif + while (sg_count-- > 0) { + if (!sg_count) + sg_flags |= 0xC0000000; + writel(sg_flags | sg_dma_len(sg), mptr++); + writel(i2o_dma_low(sg_dma_address(sg)), mptr++); +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if ((sizeof(dma_addr_t) > 4) && c->pae_support) + writel(i2o_dma_high(sg_dma_address(sg)), mptr++); +#endif + sg++; + } + *sg_ptr = mptr; + + return 1; +}; + +/** + * i2o_dma_alloc - Allocate DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: i2o_dma struct which should get the DMA buffer + * @len: length of the new DMA memory + * @gfp_mask: GFP mask + * + * Allocate a coherent DMA memory and write the pointers into addr. + * + * Returns 0 on success or -ENOMEM on failure. + */ +static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, + size_t len, unsigned int gfp_mask) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int dma_64 = 0; + + if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) { + dma_64 = 1; + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) + return -ENOMEM; + } + + addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask); + + if ((sizeof(dma_addr_t) > 4) && dma_64) + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)) + printk(KERN_WARNING "i2o: unable to set 64-bit DMA"); + + if (!addr->virt) + return -ENOMEM; + + memset(addr->virt, 0, len); + addr->len = len; + + return 0; +}; + +/** + * i2o_dma_free - Free DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: i2o_dma struct which contains the DMA buffer + * + * Free a coherent DMA memory and set virtual address of addr to NULL. + */ +static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) +{ + if (addr->virt) { + if (addr->phys) + dma_free_coherent(dev, addr->len, addr->virt, + addr->phys); + else + kfree(addr->virt); + addr->virt = NULL; + } +}; + +/** + * i2o_dma_realloc - Realloc DMA memory + * @dev: struct device pointer to the PCI device of the I2O controller + * @addr: pointer to a i2o_dma struct DMA buffer + * @len: new length of memory + * @gfp_mask: GFP mask + * + * If there was something allocated in the addr, free it first. If len > 0 + * than try to allocate it and write the addresses back to the addr + * structure. If len == 0 set the virtual address to NULL. + * + * Returns the 0 on success or negative error code on failure. + */ +static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, + size_t len, unsigned int gfp_mask) +{ + i2o_dma_free(dev, addr); + + if (len) + return i2o_dma_alloc(dev, addr, len, gfp_mask); + + return 0; +}; + /* I2O driver (OSM) functions */ extern int i2o_driver_register(struct i2o_driver *); extern void i2o_driver_unregister(struct i2o_driver *); @@ -375,10 +615,11 @@ extern int i2o_device_claim_release(struct i2o_device *); /* Exec OSM functions */ extern int i2o_exec_lct_get(struct i2o_controller *); -/* device / driver conversion functions */ +/* device / driver / kobject conversion functions */ #define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver) #define to_i2o_device(dev) container_of(dev, struct i2o_device, device) #define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device) +#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj)) /** * i2o_msg_get - obtain an I2O message from the IOP @@ -466,8 +707,10 @@ static inline struct i2o_message __iomem *i2o_msg_out_to_virt(struct i2o_controller *c, u32 m) { - BUG_ON(m < c->out_queue.phys - || m >= c->out_queue.phys + c->out_queue.len); + if (unlikely + (m < c->out_queue.phys + || m >= c->out_queue.phys + c->out_queue.len)) + return NULL; return c->out_queue.virt + (m - c->out_queue.phys); }; @@ -532,48 +775,6 @@ static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr) } }; -/** - * i2o_dma_map - Map the memory to DMA - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should be mapped - * - * Map the memory in addr->virt to coherent DMA memory and write the - * physical address into addr->phys. - * - * Returns 0 on success or -ENOMEM on failure. - */ -static inline int i2o_dma_map(struct device *dev, struct i2o_dma *addr) -{ - if (!addr->virt) - return -EFAULT; - - if (!addr->phys) - addr->phys = dma_map_single(dev, addr->virt, addr->len, - DMA_BIDIRECTIONAL); - if (!addr->phys) - return -ENOMEM; - - return 0; -}; - -/** - * i2o_dma_unmap - Unmap the DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should be unmapped - * - * Unmap the memory in addr->virt from DMA memory. - */ -static inline void i2o_dma_unmap(struct device *dev, struct i2o_dma *addr) -{ - if (!addr->virt) - return; - - if (addr->phys) { - dma_unmap_single(dev, addr->phys, addr->len, DMA_BIDIRECTIONAL); - addr->phys = 0; - } -}; - /* * Endian handling wrapped into the macro - keeps the core code * cleaner. @@ -725,6 +926,14 @@ extern void i2o_debug_state(struct i2o_controller *c); #define I2O_CMD_SCSI_ABORT 0x83 #define I2O_CMD_SCSI_BUSRESET 0x27 +/* + * Bus Adapter Class + */ +#define I2O_CMD_BUS_ADAPTER_RESET 0x85 +#define I2O_CMD_BUS_RESET 0x87 +#define I2O_CMD_BUS_SCAN 0x89 +#define I2O_CMD_BUS_QUIESCE 0x8b + /* * Random Block Storage Class */ @@ -948,7 +1157,7 @@ extern void i2o_debug_state(struct i2o_controller *c); /* request queue sizes */ #define I2O_MAX_SECTORS 1024 -#define I2O_MAX_SEGMENTS 128 +#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS #define I2O_REQ_MEMPOOL_SIZE 32 -- cgit v1.2.3