From 7225b3fd0b6e224235fc50a69f70479ff96d5602 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Mon, 9 Jan 2006 22:51:46 +0000 Subject: [MMC] Indicate that R1/R1b contains command opcode Some controllers actually check the first byte of the response (most don't). This byte contains the command opcode for R1/R1b and all 1:s for other types. The difference must be indicated to the controller so it knows which reply to expect. Signed-off-by: Pierre Ossman --- include/linux/mmc/mmc.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux/mmc/mmc.h') diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 86d491b3b73..ccd3e13de1e 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -27,14 +27,15 @@ struct mmc_command { #define MMC_RSP_MASK (3 << 0) #define MMC_RSP_CRC (1 << 3) /* expect valid crc */ #define MMC_RSP_BUSY (1 << 4) /* card may send busy */ +#define MMC_RSP_OPCODE (1 << 5) /* response contains opcode */ /* * These are the response types, and correspond to valid bit * patterns of the above flags. One additional valid pattern * is all zeros, which means we don't expect a response. */ -#define MMC_RSP_R1 (MMC_RSP_SHORT|MMC_RSP_CRC) -#define MMC_RSP_R1B (MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_BUSY) +#define MMC_RSP_R1 (MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE) +#define MMC_RSP_R1B (MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY) #define MMC_RSP_R2 (MMC_RSP_LONG|MMC_RSP_CRC) #define MMC_RSP_R3 (MMC_RSP_SHORT) #define MMC_RSP_R6 (MMC_RSP_SHORT|MMC_RSP_CRC) -- cgit v1.2.3