From ffadcc2ff42ecedf71ea67d9051ff028927aed08 Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Wed, 12 Jul 2006 08:59:00 -0700 Subject: [PATCH] PCI: PCIE power management quirk When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/pci.h') diff --git a/include/linux/pci.h b/include/linux/pci.h index 983fca251b2..8565b81d7fb 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -161,6 +161,7 @@ struct pci_dev { unsigned int is_enabled:1; /* pci_enable_device has been called */ unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ + unsigned int no_d1d2:1; /* only allow d0 or d3 */ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; -- cgit v1.2.3