From 8bf62ecee58360749c5f0e68bc97d5e02a6816b1 Mon Sep 17 00:00:00 2001
From: Albert Lee <albertcc@tw.ibm.com>
Date: Thu, 12 May 2005 15:29:42 -0400
Subject: [libata] C/H/S support, for older devices

---
 include/linux/ata.h    | 14 ++++++++++++++
 include/linux/libata.h |  6 ++++++
 2 files changed, 20 insertions(+)

(limited to 'include/linux')

diff --git a/include/linux/ata.h b/include/linux/ata.h
index f178894edd0..d8981402cd5 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -125,6 +125,7 @@ enum {
 	ATA_CMD_PACKET		= 0xA0,
 	ATA_CMD_VERIFY		= 0x40,
 	ATA_CMD_VERIFY_EXT	= 0x42,
+	ATA_CMD_INIT_DEV_PARAMS	= 0x91,
 
 	/* SETFEATURES stuff */
 	SETFEATURES_XFER	= 0x03,
@@ -174,6 +175,7 @@ enum {
 	ATA_TFLAG_ISADDR	= (1 << 1), /* enable r/w to nsect/lba regs */
 	ATA_TFLAG_DEVICE	= (1 << 2), /* enable r/w to device reg */
 	ATA_TFLAG_WRITE		= (1 << 3), /* data dir: host->dev==1 (write) */
+	ATA_TFLAG_LBA		= (1 << 4), /* enable LBA */
 };
 
 enum ata_tf_protocols {
@@ -242,6 +244,18 @@ struct ata_taskfile {
 	  ((u64) (id)[(n) + 1] << 16) |	\
 	  ((u64) (id)[(n) + 0]) )
 
+static inline int ata_id_current_chs_valid(u16 *id)
+{
+	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command 
+	   has not been issued to the device then the values of 
+	   id[54] to id[56] are vendor specific. */
+	return (id[53] & 0x01) && /* Current translation valid */
+		id[54] &&  /* cylinders in current translation */
+		id[55] &&  /* heads in current translation */
+		id[55] <= 16 &&
+		id[56];    /* sectors in current translation */
+}
+
 static inline int atapi_cdb_len(u16 *dev_id)
 {
 	u16 tmp = dev_id[0] & 0x3;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 505160ab472..bd0df84cfd8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -95,6 +95,7 @@ enum {
 	ATA_DFLAG_LBA48		= (1 << 0), /* device supports LBA48 */
 	ATA_DFLAG_PIO		= (1 << 1), /* device currently in PIO mode */
 	ATA_DFLAG_LOCK_SECTORS	= (1 << 2), /* don't adjust max_sectors */
+	ATA_DFLAG_LBA		= (1 << 3), /* device supports LBA */
 
 	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
 	ATA_DEV_ATA		= 1,	/* ATA device */
@@ -278,6 +279,11 @@ struct ata_device {
 	u8			xfer_protocol;	/* taskfile xfer protocol */
 	u8			read_cmd;	/* opcode to use on read */
 	u8			write_cmd;	/* opcode to use on write */
+
+	/* for CHS addressing */
+	u16			cylinders;	/* Number of cylinders */
+	u16			heads;		/* Number of heads */
+	u16			sectors;	/* Number of sectors per track */
 };
 
 struct ata_port {
-- 
cgit v1.2.3