From f29ac756a40d0f1bb07d682ea521e7b666ff06d5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 19 Jun 2009 18:27:26 +0200 Subject: perf_counter: Optimize perf_swcounter_event() Similar to tracepoints, use an enable variable to reduce overhead when unused. Only look for a counter of a particular event type when we know there is at least one in the system. Signed-off-by: Peter Zijlstra LKML-Reference: Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 89698d8aba5..e7213e46cf9 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -669,7 +669,16 @@ static inline int is_software_counter(struct perf_counter *counter) (counter->attr.type != PERF_TYPE_HW_CACHE); } -extern void perf_swcounter_event(u32, u64, int, struct pt_regs *, u64); +extern atomic_t perf_swcounter_enabled[PERF_COUNT_SW_MAX]; + +extern void __perf_swcounter_event(u32, u64, int, struct pt_regs *, u64); + +static inline void +perf_swcounter_event(u32 event, u64 nr, int nmi, struct pt_regs *regs, u64 addr) +{ + if (atomic_read(&perf_swcounter_enabled[event])) + __perf_swcounter_event(event, nr, nmi, regs, addr); +} extern void __perf_counter_mmap(struct vm_area_struct *vma); -- cgit v1.2.3 From 92722b1bb1ebcba767f9c6ee499992ee33367268 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 11 Jun 2009 14:17:48 +0100 Subject: leds: Further document parameters for blink_set() The documentation for the parameters of blink_set() was a bit hard to find so put some where I'd expected to find it. Signed-off-by: Mark Brown Signed-off-by: Richard Purdie --- include/linux/leds.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/leds.h b/include/linux/leds.h index 376fe07732e..c7f0b148df0 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -45,7 +45,9 @@ struct led_classdev { /* Get LED brightness level */ enum led_brightness (*brightness_get)(struct led_classdev *led_cdev); - /* Activate hardware accelerated blink */ + /* Activate hardware accelerated blink, delays are in + * miliseconds and if none is provided then a sensible default + * should be chosen. */ int (*blink_set)(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off); -- cgit v1.2.3 From 5054d39e327f76df022163a2ebd02e444c5d65f9 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Fri, 19 Jun 2009 13:55:42 +0200 Subject: leds: LED driver for National Semiconductor LP3944 Funlight Chip LEDs driver for National Semiconductor LP3944 Funlight Chip http://www.national.com/pf/LP/LP3944.html This helper chip can drive up to 8 leds, with two programmable DIM modes; it could even be used as a gpio expander but this driver assumes it is used as a led controller. The DIM modes are used to set _blink_ patterns for leds, the pattern is specified supplying two parameters: - period: from 0s to 1.6s - duty cycle: percentage of the period the led is on, from 0 to 100 LP3944 can be found on Motorola A910 smartphone, where it drives the rgb leds, the camera flash light and the displays backlights. Signed-off-by: Antonio Ospite Signed-off-by: Richard Purdie --- include/linux/leds-lp3944.h | 53 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 include/linux/leds-lp3944.h (limited to 'include/linux') diff --git a/include/linux/leds-lp3944.h b/include/linux/leds-lp3944.h new file mode 100644 index 00000000000..afc9f9fd70f --- /dev/null +++ b/include/linux/leds-lp3944.h @@ -0,0 +1,53 @@ +/* + * leds-lp3944.h - platform data structure for lp3944 led controller + * + * Copyright (C) 2009 Antonio Ospite + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __LINUX_LEDS_LP3944_H +#define __LINUX_LEDS_LP3944_H + +#include +#include + +#define LP3944_LED0 0 +#define LP3944_LED1 1 +#define LP3944_LED2 2 +#define LP3944_LED3 3 +#define LP3944_LED4 4 +#define LP3944_LED5 5 +#define LP3944_LED6 6 +#define LP3944_LED7 7 +#define LP3944_LEDS_MAX 8 + +#define LP3944_LED_STATUS_MASK 0x03 +enum lp3944_status { + LP3944_LED_STATUS_OFF = 0x0, + LP3944_LED_STATUS_ON = 0x1, + LP3944_LED_STATUS_DIM0 = 0x2, + LP3944_LED_STATUS_DIM1 = 0x3 +}; + +enum lp3944_type { + LP3944_LED_TYPE_NONE, + LP3944_LED_TYPE_LED, + LP3944_LED_TYPE_LED_INVERTED, +}; + +struct lp3944_led { + char *name; + enum lp3944_type type; + enum lp3944_status status; +}; + +struct lp3944_platform_data { + struct lp3944_led leds[LP3944_LEDS_MAX]; + u8 leds_size; +}; + +#endif /* __LINUX_LEDS_LP3944_H */ -- cgit v1.2.3 From ed88bae6918fa990cbfe47316bd0f790121aaf00 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 12 May 2009 15:33:12 -0700 Subject: leds: Add options to have GPIO LEDs start on or keep their state There already is a "default-on" trigger but there are problems with it. For one, it's a inefficient way to do it and requires led trigger support to be compiled in. But the real reason is that is produces a glitch on the LED. The GPIO is allocate with the LED *off*, then *later* when the trigger runs it is turned back on. If the LED was already on via the GPIO's reset default or action of the firmware, this produces a glitch where the LED goes from on to off to on. While normally this is fast enough that it wouldn't be noticeable to a human observer, there are still serious problems. One is that there may be something else on the GPIO line, like a hardware alarm or watchdog, that is fast enough to notice the glitch. Another is that the kernel may panic before the LED is turned back on, thus hanging with the LED in the wrong state. This is not just speculation, but actually happened to me with an embedded system that has an LED which should turn off when the kernel finishes booting, which was left in the incorrect state due to a bug in the OF LED binding code. We also let GPIO LEDs get their initial value from whatever the current state of the GPIO line is. On some systems the LEDs are put into some state by the firmware or hardware before Linux boots, and it is desired to have them keep this state which is otherwise unknown to Linux. This requires that the underlying GPIO driver support reading the value of output GPIOs. Some drivers support this and some do not. The platform device binding gains a field in the platform data "default_state" that controls this. There are three constants defined to select from on, off, or keeping the current state. The OpenFirmware binding uses a property named "default-state" that can be set to "on", "off", or "keep". The default if the property isn't present is off. Signed-off-by: Trent Piepho Acked-by: Grant Likely Acked-by: Wolfram Sang Acked-by: Sean MacLennan Signed-off-by: Richard Purdie --- include/linux/leds.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/leds.h b/include/linux/leds.h index c7f0b148df0..62af62915cf 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -143,9 +143,14 @@ struct gpio_led { const char *name; const char *default_trigger; unsigned gpio; - u8 active_low : 1; - u8 retain_state_suspended : 1; + unsigned active_low : 1; + unsigned retain_state_suspended : 1; + unsigned default_state : 2; + /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */ }; +#define LEDS_GPIO_DEFSTATE_OFF 0 +#define LEDS_GPIO_DEFSTATE_ON 1 +#define LEDS_GPIO_DEFSTATE_KEEP 2 struct gpio_led_platform_data { int num_leds; -- cgit v1.2.3 From a1dd8c617217322614f0465ae347895c4b58e1ab Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Mon, 22 Jun 2009 14:54:13 +0100 Subject: leds: Futher document blink_set Futher document blink_set function pointer Signed-off-by: Richard Purdie --- include/linux/leds.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/leds.h b/include/linux/leds.h index 62af62915cf..d8bf9665e70 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -47,7 +47,8 @@ struct led_classdev { /* Activate hardware accelerated blink, delays are in * miliseconds and if none is provided then a sensible default - * should be chosen. */ + * should be chosen. The call can adjust the timings if it can't + * match the values specified exactly. */ int (*blink_set)(struct led_classdev *led_cdev, unsigned long *delay_on, unsigned long *delay_off); -- cgit v1.2.3 From 346c17a6cf60375323adfaa4b8a9d841049f890e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 22 Jun 2009 07:38:26 +0000 Subject: ide: relax DMA info validity checking There are some broken devices that report multiple DMA xfer modes enabled at once (ATA spec doesn't allow it) but otherwise work fine with DMA so just delete ide_id_dma_bug(). [ As discovered by detective work by Frans and Bart, due to how handling of the ID block was handled before commit c419993 ("ide-iops: only clear DMA words on setting DMA mode") this check was always seeing zeros in the fields or other similar garbage. Therefore this check wasn't actually checking anything. Now that the tests actually check the real bits, all we see are devices that trigger the check yet work perfectly fine, therefore killing this useless check is the best thing to do. -DaveM ] Reported-by: Frans Pop Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- include/linux/ide.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 95c6e00a72e..cf1f3888067 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1361,7 +1361,6 @@ int ide_in_drive_list(u16 *, const struct drive_list_entry *); #ifdef CONFIG_BLK_DEV_IDEDMA int ide_dma_good_drive(ide_drive_t *); int __ide_dma_bad_drive(ide_drive_t *); -int ide_id_dma_bug(ide_drive_t *); u8 ide_find_dma_mode(ide_drive_t *, u8); @@ -1402,7 +1401,6 @@ void ide_dma_lost_irq(ide_drive_t *); ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int); #else -static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; } static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; } -- cgit v1.2.3 From 507e123151149e578c9aae33eb876c49824da5f8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 23 Jun 2009 17:38:15 +0200 Subject: timer stats: Optimize by adding quick check to avoid function calls When the kernel is configured with CONFIG_TIMER_STATS but timer stats are runtime disabled we still get calls to __timer_stats_timer_set_start_info which initializes some fields in the corresponding struct timer_list. So add some quick checks in the the timer stats setup functions to avoid function calls to __timer_stats_timer_set_start_info when timer stats are disabled. In an artificial workload that does nothing but playing ping pong with a single tcp packet via loopback this decreases cpu consumption by 1 - 1.5%. This is part of a modified function trace output on SLES11: perl-2497 [00] 28630647177732388 [+ 125]: sk_reset_timer <-tcp_v4_rcv perl-2497 [00] 28630647177732513 [+ 125]: mod_timer <-sk_reset_timer perl-2497 [00] 28630647177732638 [+ 125]: __timer_stats_timer_set_start_info <-mod_timer perl-2497 [00] 28630647177732763 [+ 125]: __mod_timer <-mod_timer perl-2497 [00] 28630647177732888 [+ 125]: __timer_stats_timer_set_start_info <-__mod_timer perl-2497 [00] 28630647177733013 [+ 93]: lock_timer_base <-__mod_timer Signed-off-by: Heiko Carstens Cc: Andrew Morton Cc: Martin Schwidefsky Cc: Mustafa Mesanovic Cc: Arjan van de Ven LKML-Reference: <20090623153811.GA4641@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/hrtimer.h | 5 +++++ include/linux/timer.h | 4 ++++ 2 files changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 7400900de94..54648e625ef 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -21,6 +21,7 @@ #include #include #include +#include struct hrtimer_clock_base; @@ -447,6 +448,8 @@ extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf, static inline void timer_stats_account_hrtimer(struct hrtimer *timer) { + if (likely(!timer->start_pid)) + return; timer_stats_update_stats(timer, timer->start_pid, timer->start_site, timer->function, timer->start_comm, 0); } @@ -456,6 +459,8 @@ extern void __timer_stats_hrtimer_set_start_info(struct hrtimer *timer, static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer) { + if (likely(!timer_stats_active)) + return; __timer_stats_hrtimer_set_start_info(timer, __builtin_return_address(0)); } diff --git a/include/linux/timer.h b/include/linux/timer.h index ccf882eed8f..be62ec2ebea 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -190,6 +190,8 @@ extern unsigned long get_next_timer_interrupt(unsigned long now); */ #ifdef CONFIG_TIMER_STATS +extern int timer_stats_active; + #define TIMER_STATS_FLAG_DEFERRABLE 0x1 extern void init_timer_stats(void); @@ -203,6 +205,8 @@ extern void __timer_stats_timer_set_start_info(struct timer_list *timer, static inline void timer_stats_timer_set_start_info(struct timer_list *timer) { + if (likely(!timer_stats_active)) + return; __timer_stats_timer_set_start_info(timer, __builtin_return_address(0)); } -- cgit v1.2.3 From 6fdc03709433ccc2005f0f593ae9d9dd04f7b485 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 20 Jun 2009 13:23:59 +0200 Subject: firewire: core: do not DMA-map stack addresses The DMA mapping API cannot map on-stack addresses, as explained in Documentation/DMA-mapping.txt. Convert the two cases of on-stack packet payload buffers in firewire-core (payload of lock requests in the bus manager work and in iso resource management) to slab-allocated memory. There are a number on-stack buffers for quadlet write or quadlet read requests in firewire-core and firewire-sbp2. These are harmless; they are copied to/ from card driver internal DMA buffers since quadlet payloads are inlined with packet headers. Signed-off-by: Stefan Richter --- include/linux/firewire.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/firewire.h b/include/linux/firewire.h index 9823946adbc..192d1e43c43 100644 --- a/include/linux/firewire.h +++ b/include/linux/firewire.h @@ -127,6 +127,7 @@ struct fw_card { struct delayed_work work; int bm_retries; int bm_generation; + __be32 bm_transaction_data[2]; bool broadcast_channel_allocated; u32 broadcast_channel; -- cgit v1.2.3 From 9d73777e500929b71dcfed16eec05f6760e345a6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 25 Jun 2009 11:58:55 +0200 Subject: clarify get_user_pages() prototype Currently the 4th parameter of get_user_pages() is called len, but its in pages, not bytes. Rename the thing to nr_pages to avoid future confusion. Signed-off-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mm.h b/include/linux/mm.h index d006e93d5c9..ba3a7cb1eaa 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -826,7 +826,7 @@ extern int make_pages_present(unsigned long addr, unsigned long end); extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void *buf, int len, int write); int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, - unsigned long start, int len, int write, int force, + unsigned long start, int nr_pages, int write, int force, struct page **pages, struct vm_area_struct **vmas); int get_user_pages_fast(unsigned long start, int nr_pages, int write, struct page **pages); -- cgit v1.2.3 From 41f95331b972a039f519ae0c70f051b7121f7346 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 23 Jun 2009 17:55:18 +0200 Subject: perf_counter: Split the mmap control page in two parts Since there are two distinct sections to the control page, move them apart so that possible extentions don't overlap. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index e7213e46cf9..489d5cbfbcc 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -233,6 +233,12 @@ struct perf_counter_mmap_page { __u32 index; /* hardware counter identifier */ __s64 offset; /* add to hardware counter value */ + /* + * Hole for extension of the self monitor capabilities + */ + + __u64 __reserved[125]; /* align to 1k */ + /* * Control data for the mmap() data buffer. * -- cgit v1.2.3 From 7f8b4e4e0988dadfd22330fd147ad2453e19f510 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 22 Jun 2009 14:34:35 +0200 Subject: perf_counter: Add scale information to the mmap control page Add the needed time scale to the self-profile mmap information. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 489d5cbfbcc..bcbf1c43ed4 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -232,12 +232,14 @@ struct perf_counter_mmap_page { __u32 lock; /* seqlock for synchronization */ __u32 index; /* hardware counter identifier */ __s64 offset; /* add to hardware counter value */ + __u64 time_enabled; /* time counter active */ + __u64 time_running; /* time counter on cpu */ /* * Hole for extension of the self monitor capabilities */ - __u64 __reserved[125]; /* align to 1k */ + __u64 __reserved[123]; /* align to 1k */ /* * Control data for the mmap() data buffer. -- cgit v1.2.3 From 38b200d67636a30cb8dc1508137908e7a649b5c9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 23 Jun 2009 20:13:11 +0200 Subject: perf_counter: Add PERF_EVENT_READ Provide a read() like event which can be used to log the counter value at specific sites such as child->parent folding on exit. In order to be useful, we log the counter parent ID, not the actual counter ID, since userspace can only relate parent IDs to perf_counter_attr constructs. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index bcbf1c43ed4..6a384f04755 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -334,6 +334,18 @@ enum perf_event_type { */ PERF_EVENT_FORK = 7, + /* + * struct { + * struct perf_event_header header; + * u32 pid, tid; + * u64 value; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 parent_id; } && PERF_FORMAT_ID + * }; + */ + PERF_EVENT_READ = 8, + /* * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field * will be PERF_SAMPLE_* -- cgit v1.2.3 From bfbd3381e63aa2a14c6706afb50ce4630aa0d9a2 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 24 Jun 2009 21:11:59 +0200 Subject: perf_counter: Implement more accurate per task statistics With the introduction of PERF_EVENT_READ we have the possibility to provide accurate counter values for individual tasks in a task hierarchy. However, due to the lazy context switching used for similar counter contexts our current per task counts are way off. In order to maintain some of the lazy switch benefits we don't disable it out-right, but simply iterate the active counters and flip the values between the contexts. This only reads the counters but does not need to reprogram the full PMU. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 6a384f04755..de70a10b5ec 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -178,8 +178,9 @@ struct perf_counter_attr { mmap : 1, /* include mmap data */ comm : 1, /* include comm data */ freq : 1, /* use freq, not period */ + inherit_stat : 1, /* per task counts */ - __reserved_1 : 53; + __reserved_1 : 52; __u32 wakeup_events; /* wakeup every n events */ __u32 __reserved_2; @@ -602,6 +603,7 @@ struct perf_counter_context { int nr_counters; int nr_active; int is_active; + int nr_stat; atomic_t refcount; struct task_struct *task; -- cgit v1.2.3 From e6e18ec79b023d5fe84226cef533cf0e3770ce93 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 25 Jun 2009 11:27:12 +0200 Subject: perf_counter: Rework the sample ABI The PERF_EVENT_READ implementation made me realize we don't actually need the sample_type int the output sample, since we already have that in the perf_counter_attr information. Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the event->type overloading, and imply put counter overflow samples in a PERF_EVENT_SAMPLE type. This also fixes the issue that event->type was only 32-bit and sample_type had 64 usable bits. Signed-off-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index de70a10b5ec..3078e23c91e 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -262,7 +262,6 @@ struct perf_counter_mmap_page { #define PERF_EVENT_MISC_KERNEL (1 << 0) #define PERF_EVENT_MISC_USER (2 << 0) #define PERF_EVENT_MISC_HYPERVISOR (3 << 0) -#define PERF_EVENT_MISC_OVERFLOW (1 << 2) struct perf_event_header { __u32 type; @@ -348,9 +347,6 @@ enum perf_event_type { PERF_EVENT_READ = 8, /* - * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field - * will be PERF_SAMPLE_* - * * struct { * struct perf_event_header header; * @@ -358,8 +354,9 @@ enum perf_event_type { * { u32 pid, tid; } && PERF_SAMPLE_TID * { u64 time; } && PERF_SAMPLE_TIME * { u64 addr; } && PERF_SAMPLE_ADDR - * { u64 config; } && PERF_SAMPLE_CONFIG + * { u64 id; } && PERF_SAMPLE_ID * { u32 cpu, res; } && PERF_SAMPLE_CPU + * { u64 period; } && PERF_SAMPLE_PERIOD * * { u64 nr; * { u64 id, val; } cnt[nr]; } && PERF_SAMPLE_GROUP @@ -368,6 +365,9 @@ enum perf_event_type { * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN * }; */ + PERF_EVENT_SAMPLE = 9, + + PERF_EVENT_MAX, /* non-ABI */ }; enum perf_callchain_context { -- cgit v1.2.3 From 5211a242d0cbdded372aee59da18f80552b0a80a Mon Sep 17 00:00:00 2001 From: Kurt Garloff Date: Wed, 24 Jun 2009 14:32:11 -0700 Subject: x86: Add sysctl to allow panic on IOCK NMI error This patch introduces a new sysctl: /proc/sys/kernel/panic_on_io_nmi which defaults to 0 (off). When enabled, the kernel panics when the kernel receives an NMI caused by an IO error. The IO error triggered NMI indicates a serious system condition, which could result in IO data corruption. Rather than contiuing, panicing and dumping might be a better choice, so one can figure out what's causing the IO error. This could be especially important to companies running IO intensive applications where corruption must be avoided, e.g. a bank's databases. [ SuSE has been shipping it for a while, it was done at the request of a large database vendor, for their users. ] Signed-off-by: Kurt Garloff Signed-off-by: Roberto Angelino Signed-off-by: Greg Kroah-Hartman Cc: "Eric W. Biederman" LKML-Reference: <20090624213211.GA11291@kroah.com> Signed-off-by: Ingo Molnar --- include/linux/kernel.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fac104e7186..d6320a3e8de 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -303,6 +303,7 @@ extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in extern int panic_timeout; extern int panic_on_oops; extern int panic_on_unrecovered_nmi; +extern int panic_on_io_nmi; extern const char *print_tainted(void); extern void add_taint(unsigned flag); extern int test_taint(unsigned flag); -- cgit v1.2.3 From 5e955245d6cf49c5ed26c7add7392ff5a6762bf4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 11:27:27 +0000 Subject: ide: always kill the whole request on error * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq() and ide_floppy_do_request() for failed requests. [ bugfix part ] * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset() and ide_complete_drive_reset(). Then remove ide_rq_bytes(). [ cleanup part ] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- include/linux/ide.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index cf1f3888067..c6af7c44d46 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1062,7 +1062,6 @@ int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned l extern int ide_vlb_clk; extern int ide_pci_clk; -unsigned int ide_rq_bytes(struct request *); int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int); void ide_kill_rq(ide_drive_t *, struct request *); -- cgit v1.2.3 From d2af12aeadaedf657c9fb9c3df984d2c5ab25f4c Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 23 Jun 2009 19:59:35 -0400 Subject: Add new macros for page-aligned data and bss sections. This patch is preparation for replacing most uses of ".bss.page_aligned" and ".data.page_aligned" in the kernel with macros, so that the section name can later be changed without having to touch a lot of the kernel. The long-term goal here is to be able to change the kernel's magic section names to those that are compatible with -ffunction-sections -fdata-sections. This requires renaming all magic sections with names of the form ".data.foo". Signed-off-by: Tim Abbott Acked-by: David Howells Signed-off-by: Sam Ravnborg --- include/linux/linkage.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/linkage.h b/include/linux/linkage.h index fee9e59649c..691f59171c6 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -21,6 +21,15 @@ #define __page_aligned_data __section(.data.page_aligned) __aligned(PAGE_SIZE) #define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE) +/* + * For assembly routines. + * + * Note when using these that you must specify the appropriate + * alignment directives yourself + */ +#define __PAGE_ALIGNED_DATA .section ".data.page_aligned", "aw" +#define __PAGE_ALIGNED_BSS .section ".bss.page_aligned", "aw" + /* * This is used by architectures to keep arguments on the stack * untouched by the compiler by keeping them live until the end. -- cgit v1.2.3 From 857eceebd2803c9a3459f784acf45e5266921e4d Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Tue, 23 Jun 2009 19:59:36 -0400 Subject: Add new __init_task_data macro to be used in arch init_task.c files. This patch is preparation for replacing most ".data.init_task" in the kernel with macros, so that the section name can later be changed without having to touch a lot of the kernel. The long-term goal here is to be able to change the kernel's magic section names to those that are compatible with -ffunction-sections -fdata-sections. This requires renaming all magic sections with names of the form ".data.foo". Signed-off-by: Tim Abbott Signed-off-by: Sam Ravnborg --- include/linux/init_task.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 5368fbdc780..7fc01b13be4 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -183,5 +183,8 @@ extern struct cred init_cred; LIST_HEAD_INIT(cpu_timers[2]), \ } +/* Attach to the init_task data structure for proper alignment */ +#define __init_task_data __attribute__((__section__(".data.init_task"))) + #endif -- cgit v1.2.3 From 84261923d3dddb766736023bead6fa07b7e218d5 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Wed, 17 Jun 2009 10:53:47 -0300 Subject: KVM: protect concurrent make_all_cpus_request make_all_cpus_request contains a race condition which can trigger false request completed status, as follows: CPU0 CPU1 if (test_and_set_bit(req,&vcpu->requests)) .... if (test_and_set_bit(req,&vcpu->requests)) .. return proceed to smp_call_function_many(wait=1) Use a spinlock to serialize concurrent CPUs. Cc: stable@kernel.org Signed-off-by: Andrea Arcangeli Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index aacc5449f58..16713dc672e 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -125,6 +125,7 @@ struct kvm_kernel_irq_routing_entry { struct kvm { struct mutex lock; /* protects the vcpus array and APIC accesses */ spinlock_t mmu_lock; + spinlock_t requests_lock; struct rw_semaphore slots_lock; struct mm_struct *mm; /* userspace tied to this vm */ int nmemslots; -- cgit v1.2.3 From 94e5d714f604d4cb4cb13163f01ede278e69258b Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Fri, 26 Jun 2009 14:05:27 -0400 Subject: integrity: add ima_counts_put (updated) This patch fixes an imbalance message as reported by J.R. Okajima. The IMA file counters are incremented in ima_path_check. If the actual open fails, such as ETXTBSY, decrement the counters to prevent unnecessary imbalance messages. Reported-by: J.R. Okajima Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- include/linux/ima.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ima.h b/include/linux/ima.h index b1b827d091a..0e3f2a4c25f 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -24,6 +24,7 @@ extern int ima_path_check(struct path *path, int mask, int update_counts); extern void ima_file_free(struct file *file); extern int ima_file_mmap(struct file *file, unsigned long prot); extern void ima_counts_get(struct file *file); +extern void ima_counts_put(struct path *path, int mask); #else static inline int ima_bprm_check(struct linux_binprm *bprm) @@ -60,5 +61,10 @@ static inline void ima_counts_get(struct file *file) { return; } + +static inline void ima_counts_put(struct path *path, int mask) +{ + return; +} #endif /* CONFIG_IMA_H */ #endif /* _LINUX_IMA_H */ -- cgit v1.2.3 From bab7614d6d1b1fc96ec6c5a7ca34c8641060e659 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 29 Jun 2009 00:20:52 -0700 Subject: Input: add support for generic GPIO-based matrix keypad Original patch by Marek Vasut, modified by Eric in: 1. use delayed work to simplify the debouncing 2. combine col_polarity/row_polarity into a single active_low field 3. use a generic bit array based XOR algorithm to detect key press/release, which should make the column assertion time shorter and code a bit cleaner 4. remove the ALT_FN handling, which is no way generic, the ALT_FN key should be treated as no different from other keys, and translation will be done by user space by commands like 'loadkeys'. 5. explicitly disable row IRQs and flush potential pending work, and schedule an immediate scan after resuming as suggested by Uli Luckas 6. incorporate review comments from many others Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad controller, I have to configure those pins as generic GPIO to use this driver, works quite well, though), and Sharp Zaurus model SL-C7x0 and SL-C1000. [dtor@mail.ru: fix error unwinding path, support changing keymap from userspace] Signed-off-by: Marek Vasut Reviewed-by: Trilok Soni Reviewed-by: Uli Luckas Reviewed-by: Russell King Reviewed-by: Robert Jarzmik Signed-off-by: Eric Miao Signed-off-by: Dmitry Torokhov --- include/linux/input/matrix_keypad.h | 65 +++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 include/linux/input/matrix_keypad.h (limited to 'include/linux') diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h new file mode 100644 index 00000000000..7964516c695 --- /dev/null +++ b/include/linux/input/matrix_keypad.h @@ -0,0 +1,65 @@ +#ifndef _MATRIX_KEYPAD_H +#define _MATRIX_KEYPAD_H + +#include +#include + +#define MATRIX_MAX_ROWS 16 +#define MATRIX_MAX_COLS 16 + +#define KEY(row, col, val) ((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\ + (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\ + (val & 0xffff)) + +#define KEY_ROW(k) (((k) >> 24) & 0xff) +#define KEY_COL(k) (((k) >> 16) & 0xff) +#define KEY_VAL(k) ((k) & 0xffff) + +/** + * struct matrix_keymap_data - keymap for matrix keyboards + * @keymap: pointer to array of uint32 values encoded with KEY() macro + * representing keymap + * @keymap_size: number of entries (initialized) in this keymap + * @max_keymap_size: maximum size of keymap supported by the device + * + * This structure is supposed to be used by platform code to supply + * keymaps to drivers that implement matrix-like keypads/keyboards. + */ +struct matrix_keymap_data { + const uint32_t *keymap; + unsigned int keymap_size; + unsigned int max_keymap_size; +}; + +/** + * struct matrix_keypad_platform_data - platform-dependent keypad data + * @keymap_data: pointer to &matrix_keymap_data + * @row_gpios: array of gpio numbers reporesenting rows + * @col_gpios: array of gpio numbers reporesenting colums + * @num_row_gpios: actual number of row gpios used by device + * @num_col_gpios: actual number of col gpios used by device + * @col_scan_delay_us: delay, measured in microseconds, that is + * needed before we can keypad after activating column gpio + * @debounce_ms: debounce interval in milliseconds + * + * This structure represents platform-specific data that use used by + * matrix_keypad driver to perform proper initialization. + */ +struct matrix_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + unsigned int row_gpios[MATRIX_MAX_ROWS]; + unsigned int col_gpios[MATRIX_MAX_COLS]; + unsigned int num_row_gpios; + unsigned int num_col_gpios; + + unsigned int col_scan_delay_us; + + /* key debounce interval in milli-second */ + unsigned int debounce_ms; + + bool active_low; + bool wakeup; +}; + +#endif /* _MATRIX_KEYPAD_H */ -- cgit v1.2.3 From 8a3af79361e85db6fec4173ef1916322471c19e3 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Mon, 29 Jun 2009 14:28:27 +0200 Subject: netfilter: headers_check fix: linux/netfilter/xt_osf.h fix the following 'make headers_check' warnings: usr/include/linux/netfilter/xt_osf.h:40: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_osf.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h index fd2272e0959..18afa495f97 100644 --- a/include/linux/netfilter/xt_osf.h +++ b/include/linux/netfilter/xt_osf.h @@ -20,6 +20,8 @@ #ifndef _XT_OSF_H #define _XT_OSF_H +#include + #define MAXGENRELEN 32 #define XT_OSF_GENRE (1<<0) -- cgit v1.2.3 From d6d3f08b0fd998b647a05540cedd11a067b72867 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 29 Jun 2009 14:31:46 +0200 Subject: netfilter: xtables: conntrack match revision 2 As reported by Philip, the UNTRACKED state bit does not fit within the 8-bit state_mask member. Enlarge state_mask and give status_mask a few more bits too. Reported-by: Philip Craig References: http://markmail.org/thread/b7eg6aovfh4agyz7 Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_conntrack.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h index 3430c775194..7ae05338e94 100644 --- a/include/linux/netfilter/xt_conntrack.h +++ b/include/linux/netfilter/xt_conntrack.h @@ -81,4 +81,17 @@ struct xt_conntrack_mtinfo1 { __u8 state_mask, status_mask; }; +struct xt_conntrack_mtinfo2 { + union nf_inet_addr origsrc_addr, origsrc_mask; + union nf_inet_addr origdst_addr, origdst_mask; + union nf_inet_addr replsrc_addr, replsrc_mask; + union nf_inet_addr repldst_addr, repldst_mask; + __u32 expires_min, expires_max; + __u16 l4proto; + __be16 origsrc_port, origdst_port; + __be16 replsrc_port, repldst_port; + __u16 match_flags, invert_flags; + __u16 state_mask, status_mask; +}; + #endif /*_XT_CONNTRACK_H*/ -- cgit v1.2.3 From e6ce3066010a21bde961d8f8cefe0b69cae78a0f Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 29 Jun 2009 14:31:58 +0800 Subject: fs: allow d_instantiate to be called with negative parent dentry The new fsnotify infrastructure (starting at 90586523) causes an oops in spufs, where we populate a directory with files before instantiating the directory itself. The new changes seem to have introduced an assumption that a dentry's parent will be positive when instantiating. This change makes it once again possible to d_instantiate a dentry with a negative parent, and brings __fsnotify_d_instantiate() into line with inotify_d_instantiate(), which already has this NULL check. Signed-off-by: Jeremy Kerr Signed-off-by: Eric Paris --- include/linux/fsnotify_backend.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 44848aa830d..6c3de999fb3 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -280,7 +280,7 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry) assert_spin_locked(&dentry->d_lock); parent = dentry->d_parent; - if (fsnotify_inode_watches_children(parent->d_inode)) + if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode)) dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED; else dentry->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED; -- cgit v1.2.3 From 2fc90f6133a87da8177636866557d4cc5f56e661 Mon Sep 17 00:00:00 2001 From: Alexey Zaytsev Date: Wed, 24 Jun 2009 16:22:30 +0400 Subject: PCI: make pci_name() take const argument Since this function should never modify it (saves warnings when called with const args too). Signed-off-by: Alexey Zaytsev Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index d304ddf412d..115fb7ba508 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1145,7 +1145,7 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data) /* If you want to know what to call your pci_dev, ask this function. * Again, it's a wrapper around the generic device. */ -static inline const char *pci_name(struct pci_dev *pdev) +static inline const char *pci_name(const struct pci_dev *pdev) { return dev_name(&pdev->dev); } -- cgit v1.2.3 From 2bf427b25b79eb7cea27963a66c3d4684cae0e0c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 29 Jun 2009 19:20:42 -0700 Subject: ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y commit 2f0d0fd2a605666d38e290c5c0d2907484352dc4 ("ide-acpi: cleanup do_drive_get_GTF()") didn't account for the lack of hwif->acpidata check in generic_ide_suspend() [ indirect user of do_drive_get_GTF() through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI support is enabled but ACPI data is unavailable. Fix it by adding ide_port_acpi() helper for checking if port needs ACPI handling and cleaning generic_ide_{suspend,resume}() to use it instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI helpers (this should help in preventing similar bugs in the future). While at it: - kill superfluous debugging printks in ide_acpi_{get,push}_timing() Reported-and-tested-by: Etienne Basset Also-reported-and-tested-by: Jeff Chua Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- include/linux/ide.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index c6af7c44d46..edc93a6d931 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1419,6 +1419,7 @@ static inline void ide_dma_unmap_sg(ide_drive_t *drive, #ifdef CONFIG_BLK_DEV_IDEACPI int ide_acpi_init(void); +bool ide_port_acpi(ide_hwif_t *hwif); extern int ide_acpi_exec_tfs(ide_drive_t *drive); extern void ide_acpi_get_timing(ide_hwif_t *hwif); extern void ide_acpi_push_timing(ide_hwif_t *hwif); @@ -1427,6 +1428,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *); extern void ide_acpi_set_state(ide_hwif_t *hwif, int on); #else static inline int ide_acpi_init(void) { return 0; } +static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; } static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; } static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; } static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; } -- cgit v1.2.3 From 57e7986ed142417498155ebcd5eaf617ac37136d Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 30 Jun 2009 16:07:19 +1000 Subject: perf_counter: Provide a way to enable counters on exec This provides a way to mark a counter to be enabled on the next exec. This is useful for measuring the total activity of a program without including overhead from the process that launches it. This also changes the perf stat command to use this new facility. Signed-off-by: Paul Mackerras Cc: Peter Zijlstra LKML-Reference: <19017.43927.838745.689203@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 3078e23c91e..5e970c7d3fd 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -179,8 +179,9 @@ struct perf_counter_attr { comm : 1, /* include comm data */ freq : 1, /* use freq, not period */ inherit_stat : 1, /* per task counts */ + enable_on_exec : 1, /* next exec enables */ - __reserved_1 : 52; + __reserved_1 : 51; __u32 wakeup_events; /* wakeup every n events */ __u32 __reserved_2; -- cgit v1.2.3 From e0a43ddcc08c34dbd666d93600fd23914505f4aa Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 30 Jun 2009 20:12:23 +0200 Subject: fuse: allow umask processing in userspace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch lets filesystems handle masking the file mode on creation. This is needed if filesystem is using ACLs. - The CREATE, MKDIR and MKNOD requests are extended with a "umask" parameter. - A new FUSE_DONT_MASK flag is added to the INIT request/reply. With this the filesystem may request that the create mode is not masked. CC: Jean-Pierre AndrĂ© Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index d41ed593f79..e2b816a6248 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -25,6 +25,9 @@ * - add IOCTL message * - add unsolicited notification support * - add POLL message and NOTIFY_POLL notification + * + * 7.12 + * - add umask flag to input argument of open, mknod and mkdir */ #ifndef _LINUX_FUSE_H @@ -36,7 +39,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 11 +#define FUSE_KERNEL_MINOR_VERSION 12 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -112,6 +115,7 @@ struct fuse_file_lock { * INIT request/reply flags * * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".." + * FUSE_DONT_MASK: don't apply umask to file mode on create operations */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -119,6 +123,7 @@ struct fuse_file_lock { #define FUSE_ATOMIC_O_TRUNC (1 << 3) #define FUSE_EXPORT_SUPPORT (1 << 4) #define FUSE_BIG_WRITES (1 << 5) +#define FUSE_DONT_MASK (1 << 6) /** * CUSE INIT request/reply flags @@ -262,14 +267,18 @@ struct fuse_attr_out { struct fuse_attr attr; }; +#define FUSE_COMPAT_MKNOD_IN_SIZE 8 + struct fuse_mknod_in { __u32 mode; __u32 rdev; + __u32 umask; + __u32 padding; }; struct fuse_mkdir_in { __u32 mode; - __u32 padding; + __u32 umask; }; struct fuse_rename_in { @@ -300,8 +309,15 @@ struct fuse_setattr_in { }; struct fuse_open_in { + __u32 flags; + __u32 unused; +}; + +struct fuse_create_in { __u32 flags; __u32 mode; + __u32 umask; + __u32 padding; }; struct fuse_open_out { -- cgit v1.2.3 From 3b463ae0c6264f70e5d4c0a9c46af20fed43c96e Mon Sep 17 00:00:00 2001 From: John Muir Date: Sun, 31 May 2009 11:13:57 -0400 Subject: fuse: invalidation reverse calls Add notification messages that allow the filesystem to invalidate VFS caches. Two notifications are added: 1) inode invalidation - invalidate cached attributes - invalidate a range of pages in the page cache (this is optional) 2) dentry invalidation - try to invalidate a subtree in the dentry cache Care must be taken while accessing the 'struct super_block' for the mount, as it can go away while an invalidation is in progress. To prevent this, introduce a rw-semaphore, that is taken for read during the invalidation and taken for write in the ->kill_sb callback. Cc: Csaba Henk Cc: Anand Avati Signed-off-by: Miklos Szeredi --- include/linux/fuse.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fuse.h b/include/linux/fuse.h index e2b816a6248..cf593bf9fd3 100644 --- a/include/linux/fuse.h +++ b/include/linux/fuse.h @@ -28,6 +28,8 @@ * * 7.12 * - add umask flag to input argument of open, mknod and mkdir + * - add notification messages for invalidation of inodes and + * directory entries */ #ifndef _LINUX_FUSE_H @@ -229,6 +231,8 @@ enum fuse_opcode { enum fuse_notify_code { FUSE_NOTIFY_POLL = 1, + FUSE_NOTIFY_INVAL_INODE = 2, + FUSE_NOTIFY_INVAL_ENTRY = 3, FUSE_NOTIFY_CODE_MAX, }; @@ -524,4 +528,16 @@ struct fuse_dirent { #define FUSE_DIRENT_SIZE(d) \ FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen) +struct fuse_notify_inval_inode_out { + __u64 ino; + __s64 off; + __s64 len; +}; + +struct fuse_notify_inval_entry_out { + __u64 parent; + __u32 namelen; + __u32 padding; +}; + #endif /* _LINUX_FUSE_H */ -- cgit v1.2.3 From 133890103b9de08904f909995973e4b5c08a780e Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Tue, 30 Jun 2009 11:41:11 -0700 Subject: eventfd: revised interface and cleanups Change the eventfd interface to de-couple the eventfd memory context, from the file pointer instance. Without such change, there is no clean way to racely free handle the POLLHUP event sent when the last instance of the file* goes away. Also, now the internal eventfd APIs are using the eventfd context instead of the file*. This patch is required by KVM's IRQfd code, which is still under development. Signed-off-by: Davide Libenzi Cc: Gregory Haskins Cc: Rusty Russell Cc: Benjamin LaHaise Cc: Avi Kivity Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/aio.h | 4 ++-- include/linux/eventfd.h | 35 +++++++++++++++++++++++++++-------- 2 files changed, 29 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/aio.h b/include/linux/aio.h index b16a957030f..47f7d932a01 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -121,9 +121,9 @@ struct kiocb { /* * If the aio_resfd field of the userspace iocb is not zero, - * this is the underlying file* to deliver event to. + * this is the underlying eventfd context to deliver events to. */ - struct file *ki_eventfd; + struct eventfd_ctx *ki_eventfd; }; #define is_sync_kiocb(iocb) ((iocb)->ki_key == KIOCB_SYNC_KEY) diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index f45a8ae5f82..3b85ba6479f 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -8,10 +8,8 @@ #ifndef _LINUX_EVENTFD_H #define _LINUX_EVENTFD_H -#ifdef CONFIG_EVENTFD - -/* For O_CLOEXEC and O_NONBLOCK */ #include +#include /* * CAREFUL: Check include/asm-generic/fcntl.h when defining @@ -27,16 +25,37 @@ #define EFD_SHARED_FCNTL_FLAGS (O_CLOEXEC | O_NONBLOCK) #define EFD_FLAGS_SET (EFD_SHARED_FCNTL_FLAGS | EFD_SEMAPHORE) +#ifdef CONFIG_EVENTFD + +struct eventfd_ctx *eventfd_ctx_get(struct eventfd_ctx *ctx); +void eventfd_ctx_put(struct eventfd_ctx *ctx); struct file *eventfd_fget(int fd); -int eventfd_signal(struct file *file, int n); +struct eventfd_ctx *eventfd_ctx_fdget(int fd); +struct eventfd_ctx *eventfd_ctx_fileget(struct file *file); +int eventfd_signal(struct eventfd_ctx *ctx, int n); #else /* CONFIG_EVENTFD */ -#define eventfd_fget(fd) ERR_PTR(-ENOSYS) -static inline int eventfd_signal(struct file *file, int n) -{ return 0; } +/* + * Ugly ugly ugly error layer to support modules that uses eventfd but + * pretend to work in !CONFIG_EVENTFD configurations. Namely, AIO. + */ +static inline struct eventfd_ctx *eventfd_ctx_fdget(int fd) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int eventfd_signal(struct eventfd_ctx *ctx, int n) +{ + return -ENOSYS; +} + +static inline void eventfd_ctx_put(struct eventfd_ctx *ctx) +{ + +} -#endif /* CONFIG_EVENTFD */ +#endif #endif /* _LINUX_EVENTFD_H */ -- cgit v1.2.3 From b01e8dc34379f4ba2f454390e340a025edbaaa7e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 30 Jun 2009 11:41:18 -0700 Subject: alpha: fix percpu build breakage alpha percpu access requires custom SHIFT_PERCPU_PTR() definition for modules to work around addressing range limitation. This is done via generating inline assembly using C preprocessing which forces the assembler to generate external reference. This happens behind the compiler's back and makes the compiler think that static percpu variables in modules are unused. This used to be worked around by using __unused attribute for percpu variables which prevent the compiler from omitting the variable; however, recent declare/definition attribute unification change broke this as __used can't be used for declaration. Also, in the process, PER_CPU_ATTRIBUTES definition in alpha percpu.h got broken. This patch adds PER_CPU_DEF_ATTRIBUTES which is only used for definitions and make alpha use it to add __used for percpu variables in modules. This also fixes the PER_CPU_ATTRIBUTES double definition bug. Signed-off-by: Tejun Heo Tested-by: maximilian attems Acked-by: Ivan Kokshaysky Cc: Richard Henderson Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/percpu-defs.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h index 8f921d74f49..68438e18fff 100644 --- a/include/linux/percpu-defs.h +++ b/include/linux/percpu-defs.h @@ -24,7 +24,8 @@ #define DEFINE_PER_CPU_SECTION(type, name, section) \ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + PER_CPU_ATTRIBUTES PER_CPU_DEF_ATTRIBUTES \ + __typeof__(type) per_cpu__##name /* * Variant on the per-CPU variable declaration/definition theme used for -- cgit v1.2.3 From c4285b47b0514e2103584ee829246f813e7ae323 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 30 Jun 2009 11:41:21 -0700 Subject: parport/serial: add support for NetMos 9901 Multi-IO card Add support for the PCI-Express NetMos 9901 Multi-IO card. 0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: Kernel driver in use: parport_pc Kernel modules: parport_pc [ 16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65 [ 16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP] [ 16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007) [ 16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2 [ 16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007) [ 16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2 Signed-off-by: Michael Buesch Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index a3b00036579..73b46b6b904 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2645,6 +2645,7 @@ #define PCI_DEVICE_ID_NETMOS_9835 0x9835 #define PCI_DEVICE_ID_NETMOS_9845 0x9845 #define PCI_DEVICE_ID_NETMOS_9855 0x9855 +#define PCI_DEVICE_ID_NETMOS_9901 0x9901 #define PCI_VENDOR_ID_3COM_2 0xa727 -- cgit v1.2.3 From 341c87bf346f57748230628c5ad6ee69219250e8 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 30 Jun 2009 11:41:23 -0700 Subject: elf: limit max map count to safe value With ELF, at generating coredump, some more headers other than used vmas are added. When max_map_count == 65536, a core generated by following kinds of code can be unreadable because the number of ELF's program header is written in 16bit in Ehdr (please see elf.h) and the number overflows. == ... = mmap(); (munmap, mprotect, etc...) if (failed) abort(); == This can happen in mmap/munmap/mprotect/etc...which calls split_vma(). I think 65536 is not safe as _default_ and reduce it to 65530 is good for avoiding unexpected corrupted core. Anyway, max_map_count can be enlarged by sysctl if a user is brave.. Signed-off-by: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Jakub Jelinek Acked-by: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 4d075426988..0085d758d64 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -349,8 +349,20 @@ extern int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner); struct nsproxy; struct user_namespace; -/* Maximum number of active map areas.. This is a random (large) number */ -#define DEFAULT_MAX_MAP_COUNT 65536 +/* + * Default maximum number of active map areas, this limits the number of vmas + * per mm struct. Users can overwrite this number by sysctl but there is a + * problem. + * + * When a program's coredump is generated as ELF format, a section is created + * per a vma. In ELF, the number of sections is represented in unsigned short. + * This means the number of sections should be smaller than 65535 at coredump. + * Because the kernel adds some informative sections to a image of program at + * generating coredump, we need some margin. The number of extra sections is + * 1-3 now and depends on arch. We use "5" as safe margin, here. + */ +#define MAPCOUNT_ELF_CORE_MARGIN (5) +#define DEFAULT_MAX_MAP_COUNT (USHORT_MAX - MAPCOUNT_ELF_CORE_MARGIN) extern int sysctl_max_map_count; -- cgit v1.2.3 From b55f627feeb9d48fdbde3835e18afbc76712e49b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 30 Jun 2009 11:41:26 -0700 Subject: spi: new spi->mode bits Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by: David Brownell Cc: "Paulraj, Sandeep" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 2 ++ include/linux/spi/spidev.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 9c4cd27f468..743c933ac4e 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -80,6 +80,8 @@ struct spi_device { #define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */ #define SPI_3WIRE 0x10 /* SI/SO signals shared */ #define SPI_LOOP 0x20 /* loopback mode */ +#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */ +#define SPI_READY 0x80 /* slave pulls low to pause */ u8 bits_per_word; int irq; void *controller_state; diff --git a/include/linux/spi/spidev.h b/include/linux/spi/spidev.h index 95251ccd5a0..bf0570a84f7 100644 --- a/include/linux/spi/spidev.h +++ b/include/linux/spi/spidev.h @@ -40,6 +40,8 @@ #define SPI_LSB_FIRST 0x08 #define SPI_3WIRE 0x10 #define SPI_LOOP 0x20 +#define SPI_NO_CS 0x40 +#define SPI_READY 0x80 /*---------------------------------------------------------------------------*/ -- cgit v1.2.3 From 70d6027ff2bc8bab180273b77e7ab3e8a62cca51 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 30 Jun 2009 11:41:27 -0700 Subject: spi: add spi_master flag word Add a new spi_master.flags word listing constraints relevant to that controller. Define the first constraint bit: a half duplex restriction. Include that constraint in the OMAP1 MicroWire controller driver. Have the mmc_spi host be the first customer of this flag. Its coding relies heavily on full duplex transfers, so it must fail when the underlying controller driver won't perform them. (The spi_write_then_read routine could use it too: use the temporarily-withdrawn full-duplex speedup unless this flag is set, in which case the existing code applies. Similarly, any spi_master implementing only SPI_3WIRE should set the flag.) Signed-off-by: David Brownell Cc: Marek Szyprowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 743c933ac4e..c47c4b4da97 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -250,6 +250,10 @@ struct spi_master { /* spi_device.mode flags understood by this controller driver */ u16 mode_bits; + /* other constraints relevant to this driver */ + u16 flags; +#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */ + /* Setup mode and clock, etc (spi driver may call many times). * * IMPORTANT: this may be called when transfers to another -- cgit v1.2.3 From 537a1bf059fa312355696fa6db80726e655e7f17 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 30 Jun 2009 11:41:29 -0700 Subject: fbdev: add mutex for fb_mmap locking Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by: Krzysztof Helt Cc: Peter Zijlstra Cc: "Rafael J. Wysocki" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fb.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index dd68358996b..f847df9e99b 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -819,6 +819,7 @@ struct fb_info { int node; int flags; struct mutex lock; /* Lock for open/release/ioctl funcs */ + struct mutex mm_lock; /* Lock for fb_mmap and smem_* fields */ struct fb_var_screeninfo var; /* Current var */ struct fb_fix_screeninfo fix; /* Current fix */ struct fb_monspecs monspecs; /* Current Monitor specs */ -- cgit v1.2.3 From d9d62f3f2c6fa609883714f6fd6cd710a83d307f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 29 Jun 2009 16:54:12 +0000 Subject: usbnet: Remove private stats structure Now that nothing uses the private stats structure we can remove it. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/linux/usb/usbnet.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 5d44059f6d6..310e18a880f 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -42,7 +42,6 @@ struct usbnet { /* protocol/interface state */ struct net_device *net; - struct net_device_stats stats; int msg_enable; unsigned long data [5]; u32 xid; -- cgit v1.2.3 From 7878cba9f0037f5599004b03a1260b32d9050360 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Jun 2009 15:37:49 +0200 Subject: block: Create bip slabs with embedded integrity vectors This patch restores stacking ability to the block layer integrity infrastructure by creating a set of dedicated bip slabs. Each bip slab has an embedded bio_vec array at the end. This cuts down on memory allocations and also simplifies the code compared to the original bvec version. Only the largest bip slab is backed by a mempool. The pool is contained in the bio_set so stacking drivers can ensure forward progress. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- include/linux/bio.h | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index 2a04eb54c0d..2892b710771 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -319,7 +319,6 @@ static inline int bio_has_allocated_vec(struct bio *bio) */ struct bio_integrity_payload { struct bio *bip_bio; /* parent bio */ - struct bio_vec *bip_vec; /* integrity data vector */ sector_t bip_sector; /* virtual start sector */ @@ -328,11 +327,12 @@ struct bio_integrity_payload { unsigned int bip_size; - unsigned short bip_pool; /* pool the ivec came from */ + unsigned short bip_slab; /* slab the bip came from */ unsigned short bip_vcnt; /* # of integrity bio_vecs */ unsigned short bip_idx; /* current bip_vec index */ struct work_struct bip_work; /* I/O completion */ + struct bio_vec bip_vec[0]; /* embedded bvec array */ }; #endif /* CONFIG_BLK_DEV_INTEGRITY */ @@ -430,6 +430,9 @@ struct bio_set { unsigned int front_pad; mempool_t *bio_pool; +#if defined(CONFIG_BLK_DEV_INTEGRITY) + mempool_t *bio_integrity_pool; +#endif mempool_t *bvec_pool; }; @@ -634,8 +637,9 @@ static inline struct bio *bio_list_get(struct bio_list *bl) #define bio_integrity(bio) (bio->bi_integrity != NULL) +extern struct bio_integrity_payload *bio_integrity_alloc_bioset(struct bio *, gfp_t, unsigned int, struct bio_set *); extern struct bio_integrity_payload *bio_integrity_alloc(struct bio *, gfp_t, unsigned int); -extern void bio_integrity_free(struct bio *); +extern void bio_integrity_free(struct bio *, struct bio_set *); extern int bio_integrity_add_page(struct bio *, struct page *, unsigned int, unsigned int); extern int bio_integrity_enabled(struct bio *bio); extern int bio_integrity_set_tag(struct bio *, void *, unsigned int); @@ -645,21 +649,27 @@ extern void bio_integrity_endio(struct bio *, int); extern void bio_integrity_advance(struct bio *, unsigned int); extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int); extern void bio_integrity_split(struct bio *, struct bio_pair *, int); -extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t); +extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *); +extern int bioset_integrity_create(struct bio_set *, int); +extern void bioset_integrity_free(struct bio_set *); +extern void bio_integrity_init(void); #else /* CONFIG_BLK_DEV_INTEGRITY */ #define bio_integrity(a) (0) +#define bioset_integrity_create(a, b) (0) #define bio_integrity_prep(a) (0) #define bio_integrity_enabled(a) (0) -#define bio_integrity_clone(a, b, c) (0) -#define bio_integrity_free(a) do { } while (0) +#define bio_integrity_clone(a, b, c, d) (0) +#define bioset_integrity_free(a) do { } while (0) +#define bio_integrity_free(a, b) do { } while (0) #define bio_integrity_endio(a, b) do { } while (0) #define bio_integrity_advance(a, b) do { } while (0) #define bio_integrity_trim(a, b, c) do { } while (0) #define bio_integrity_split(a, b, c) do { } while (0) #define bio_integrity_set_tag(a, b, c) do { } while (0) #define bio_integrity_get_tag(a, b, c) do { } while (0) +#define bio_integrity_init(a) do { } while (0) #endif /* CONFIG_BLK_DEV_INTEGRITY */ -- cgit v1.2.3 From 018e0446890661504783f92388ecce7138c1566d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 26 Jun 2009 16:27:10 +0200 Subject: block: get rid of queue-private command filter The initial patches to support this through sysfs export were broken and have been if 0'ed out in any release. So lets just kill the code and reclaim some space in struct request_queue, if anyone would later like to fixup the sysfs bits, the git history can easily restore the removed bits. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 8963d9149b5..49ae07951d5 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -301,12 +301,6 @@ struct blk_queue_tag { #define BLK_SCSI_MAX_CMDS (256) #define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) -struct blk_cmd_filter { - unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; - unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; - struct kobject kobj; -}; - struct queue_limits { unsigned long bounce_pfn; unsigned long seg_boundary_mask; @@ -445,7 +439,6 @@ struct request_queue #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device bsg_dev; #endif - struct blk_cmd_filter cmd_filter; }; #define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */ @@ -998,13 +991,7 @@ static inline int sb_issue_discard(struct super_block *sb, return blkdev_issue_discard(sb->s_bdev, block, nr_blocks, GFP_KERNEL); } -/* -* command filter functions -*/ -extern int blk_verify_command(struct blk_cmd_filter *filter, - unsigned char *cmd, fmode_t has_write_perm); -extern void blk_unregister_filter(struct gendisk *disk); -extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter); +extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 -- cgit v1.2.3 From 887b5ea3683ce04966e35fa2e5fe215bedcde73c Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 1 Jul 2009 13:38:26 +0000 Subject: if_ether: add define for 1588 aka Timesync This patch adds ETH_P_1588 protocol ID define. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- include/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index ae3a1871413..70fdba2bbf7 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -78,6 +78,7 @@ #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ #define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ #define ETH_P_TIPC 0x88CA /* TIPC */ +#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ -- cgit v1.2.3 From 509dd025a4ac6f32921211557cfd434b81d8d7a7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 30 Jun 2009 16:07:26 -0300 Subject: V4L/DVB (12148): move V4L2_PIX_FMT_SGRBG8 to the proper place Instead of defining a new pif format on an internal header, move it to the V4L2 API header. Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 8a025d51090..95846d98801 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -318,6 +318,8 @@ struct v4l2_pix_format { /* see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ +#define V4L2_PIX_FMT_SGRBG8 v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ + /* * 10bit raw bayer, expanded to 16 bits * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... -- cgit v1.2.3 From a65e7bfcd74e4c0939f235d2bf9f48ddb3a57991 Mon Sep 17 00:00:00 2001 From: Hui Zhu Date: Sun, 5 Jul 2009 12:08:15 -0700 Subject: elf: fix multithreaded program core dumping on arm Fix the multithread program core thread message error. This issue affects arches with neither has CORE_DUMP_USE_REGSET nor ELF_CORE_COPY_TASK_REGS, ARM is one of them. The thread message of core file is generated in elf_dump_thread_status. The register values is set by elf_core_copy_task_regs in this function. If an arch doesn't define ELF_CORE_COPY_TASK_REGS, elf_core_copy_task_regs() will do nothing. Then the core file will not have the register message of thread. So add elf_core_copy_regs to set regiser values if ELF_CORE_COPY_TASK_REGS doesn't define. The following is how to reproduce this issue: cat 1.c #include #include #include void td1(void * i) { while (1) { printf ("1\n"); sleep (1); } return; } void td2(void * i) { while (1) { printf ("2\n"); sleep (1); } return; } int main(int argc,char *argv[],char *envp[]) { pthread_t t1,t2; pthread_create(&t1, NULL, (void*)td1, NULL); pthread_create(&t2, NULL, (void*)td2, NULL); sleep (10); assert(0); return (0); } arm-xxx-gcc -g -lpthread 1.c -o 1 copy 1.c and 1 to a arm board. Goto this board. ulimit -c 1800000 ./1 # ./1 1 2 1 ... ... 1 1: 1.c:37: main: Assertion `0' failed. Aborted (core dumped) Then you can get a core file. gdb 1 core.xxx Without the patch: (gdb) info threads 3 process 909 0x00000000 in ?? () 2 process 908 0x00000000 in ?? () * 1 process 907 0x4a6e2238 in raise () from /lib/libc.so.6 You can found that the pc of 909 and 908 is 0x00000000. With the patch: (gdb) info threads 3 process 885 0x4a749974 in nanosleep () from /lib/libc.so.6 2 process 884 0x4a749974 in nanosleep () from /lib/libc.so.6 * 1 process 883 0x4a6e2238 in raise () from /lib/libc.so.6 The pc of 885 and 884 is right. Signed-off-by: Hui Zhu Cc: Amerigo Wang Cc: Al Viro Cc: David Howells Cc: Roland McGrath Cc: Jakub Jelinek Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/elfcore.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 7605c5e9589..03ec1677980 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -125,6 +125,8 @@ static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* #ifdef ELF_CORE_COPY_TASK_REGS return ELF_CORE_COPY_TASK_REGS(t, elfregs); +#else + elf_core_copy_regs(elfregs, task_pt_regs(t)); #endif return 0; } -- cgit v1.2.3 From 82e3310ace59794ecf0f531eca94647b2863dfda Mon Sep 17 00:00:00 2001 From: Tobias Doerffel Date: Sun, 5 Jul 2009 12:08:23 -0700 Subject: linux/sysrq.h needs linux/errno.h In include/linux/sysrq.h the constant EINVAL is being used but is undefined if include/linux/errno.h is not included before. Fix this by adding #include at the beginning. Signed-off-by: Tobias Doerffel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sysrq.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h index 98a1d8cfb73..99adcdc0d3c 100644 --- a/include/linux/sysrq.h +++ b/include/linux/sysrq.h @@ -14,6 +14,8 @@ #ifndef _LINUX_SYSRQ_H #define _LINUX_SYSRQ_H +#include + struct pt_regs; struct tty_struct; -- cgit v1.2.3 From 7afdbf23c3acdec3eaf1b94f87132fff3d81ce73 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 7 Jul 2009 10:23:43 +0200 Subject: signals: declare sys_rt_tgsigqueueinfo in syscalls.h sys_rt_tgsigqueueinfo needs to be declared in linux/syscalls.h so that architectures defining the system call table in C can reference it. Signed-off-by: Arnd Bergmann LKML-Reference: <200907071023.44008.arnd@arndb.de> Signed-off-by: Thomas Gleixner --- include/linux/syscalls.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index fa4242cdade..80de7003d8c 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -321,6 +321,8 @@ asmlinkage long sys_rt_sigtimedwait(const sigset_t __user *uthese, siginfo_t __user *uinfo, const struct timespec __user *uts, size_t sigsetsize); +asmlinkage long sys_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig, + siginfo_t __user *uinfo); asmlinkage long sys_kill(int pid, int sig); asmlinkage long sys_tgkill(int tgid, int pid, int sig); asmlinkage long sys_tkill(int pid, int sig); -- cgit v1.2.3 From e4f7c0b44a8ac8935f223195af9ea637d0c08091 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:32:59 +0100 Subject: kmemleak: Trace the kmalloc_large* functions in slub The kmalloc_large() and kmalloc_large_node() functions were missed when adding the kmemleak hooks to the slub allocator. However, they should be traced to avoid false positives. Signed-off-by: Catalin Marinas Cc: Christoph Lameter Acked-by: Pekka Enberg --- include/linux/slub_def.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 4dcbc2c7149..c1c862b1d01 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -11,6 +11,7 @@ #include #include #include +#include enum stat_item { ALLOC_FASTPATH, /* Allocation from cpu slab */ @@ -233,6 +234,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags) unsigned int order = get_order(size); void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order); + kmemleak_alloc(ret, size, 1, flags); trace_kmalloc(_THIS_IP_, ret, size, PAGE_SIZE << order, flags); return ret; -- cgit v1.2.3 From 53238a60dd4a679f6fe5613a7ed46899587205cf Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Jul 2009 10:33:00 +0100 Subject: kmemleak: Allow partial freeing of memory blocks Functions like free_bootmem() are allowed to free only part of a memory block. This patch adds support for this via the kmemleak_free_part() callback which removes the original object and creates one or two additional objects as a result of the memory block split. Signed-off-by: Catalin Marinas Cc: Ingo Molnar Acked-by: Pekka Enberg --- include/linux/kmemleak.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h index 7796aed6cdd..6a63807f714 100644 --- a/include/linux/kmemleak.h +++ b/include/linux/kmemleak.h @@ -27,6 +27,7 @@ extern void kmemleak_init(void); extern void kmemleak_alloc(const void *ptr, size_t size, int min_count, gfp_t gfp); extern void kmemleak_free(const void *ptr); +extern void kmemleak_free_part(const void *ptr, size_t size); extern void kmemleak_padding(const void *ptr, unsigned long offset, size_t size); extern void kmemleak_not_leak(const void *ptr); @@ -71,6 +72,9 @@ static inline void kmemleak_alloc_recursive(const void *ptr, size_t size, static inline void kmemleak_free(const void *ptr) { } +static inline void kmemleak_free_part(const void *ptr, size_t size) +{ +} static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags) { } -- cgit v1.2.3 From e9bf0cc7cbfbf3952cdf8028aa0d348d09ecdba1 Mon Sep 17 00:00:00 2001 From: Parag Warudkar Date: Wed, 8 Jul 2009 11:46:02 -0400 Subject: elfcore.h : Fix UML build breakage Commit a65e7bfcd74e4c0939f235d2bf9f48ddb3a57991 broke the UML build with the following error - In file included from fs/proc/kcore.c:17: include/linux/elfcore.h: In function 'elf_core_copy_task_regs': include/linux/elfcore.h:129: error: implicit declaration of function 'task_pt_regs' Fix this by restoring the previous behavior of returning 0 for all arches like UML that don't define task_pt_regs. Signed-off-by: Parag Warudkar Acked-by: Amerigo Wang Signed-off-by: Linus Torvalds --- include/linux/elfcore.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 03ec1677980..00d6a68d042 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -122,10 +122,9 @@ static inline void elf_core_copy_kernel_regs(elf_gregset_t *elfregs, struct pt_r static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs) { -#ifdef ELF_CORE_COPY_TASK_REGS - +#if defined (ELF_CORE_COPY_TASK_REGS) return ELF_CORE_COPY_TASK_REGS(t, elfregs); -#else +#elif defined (task_pt_regs) elf_core_copy_regs(elfregs, task_pt_regs(t)); #endif return 0; -- cgit v1.2.3 From b43f3cbd21ffbd719fd4fa6642bfe6af255ded34 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 8 Jul 2009 01:54:37 +0400 Subject: headers: mnt_namespace.h redux Fix various silly problems wrt mnt_namespace.h: - exit_mnt_ns() isn't used, remove it - done that, sched.h and nsproxy.h inclusions aren't needed - mount.h inclusion was need for vfsmount_lock, but no longer - remove mnt_namespace.h inclusion from files which don't use anything from mnt_namespace.h Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/mnt_namespace.h | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h index 3beb2592b03..d74785c2393 100644 --- a/include/linux/mnt_namespace.h +++ b/include/linux/mnt_namespace.h @@ -2,10 +2,9 @@ #define _NAMESPACE_H_ #ifdef __KERNEL__ -#include -#include -#include +#include #include +#include struct mnt_namespace { atomic_t count; @@ -28,14 +27,6 @@ extern struct mnt_namespace *create_mnt_ns(struct vfsmount *mnt); extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *, struct fs_struct *); extern void put_mnt_ns(struct mnt_namespace *ns); - -static inline void exit_mnt_ns(struct task_struct *p) -{ - struct mnt_namespace *ns = p->nsproxy->mnt_ns; - if (ns) - put_mnt_ns(ns); -} - static inline void get_mnt_ns(struct mnt_namespace *ns) { atomic_inc(&ns->count); -- cgit v1.2.3 From 1ce822fa04fd6878f079461a4b8affe4bb5ec27b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 8 Jul 2009 21:25:54 +0530 Subject: includecheck fix: include/linux, rfkill.h fix the following 'make includecheck' warning: include/linux/rfkill.h: linux/types.h is included more than once. Signed-off-by: Jaswinder Singh Rajput Signed-off-by: John W. Linville --- include/linux/rfkill.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index e73e2429a1b..2ce29831feb 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -99,7 +99,6 @@ enum rfkill_user_states { #undef RFKILL_STATE_UNBLOCKED #undef RFKILL_STATE_HARD_BLOCKED -#include #include #include #include -- cgit v1.2.3 From ad46276952f1af34cd91d46d49ba13d347d56367 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 8 Jul 2009 12:10:31 +0000 Subject: memory barrier: adding smp_mb__after_lock Adding smp_mb__after_lock define to be used as a smp_mb call after a lock. Making it nop for x86, since {read|write|spin}_lock() on x86 are full memory barriers. Signed-off-by: Jiri Olsa Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/spinlock.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h index 252b245cfcf..4be57ab0347 100644 --- a/include/linux/spinlock.h +++ b/include/linux/spinlock.h @@ -132,6 +132,11 @@ do { \ #endif /*__raw_spin_is_contended*/ #endif +/* The lock does not imply full memory barrier. */ +#ifndef ARCH_HAS_SMP_MB_AFTER_LOCK +static inline void smp_mb__after_lock(void) { smp_mb(); } +#endif + /** * spin_unlock_wait - wait until the spinlock gets unlocked * @lock: the spinlock in question. -- cgit v1.2.3 From 6ff7041dbfeb3bd7dfe9aa67275c21199ef760d6 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 10 Jul 2009 14:57:05 +0200 Subject: hrtimer: Fix migration expiry check The timer migration expiry check should prevent the migration of a timer to another CPU when the timer expires before the next event is scheduled on the other CPU. Migrating the timer might delay it because we can not reprogram the clock event device on the other CPU. But the code implementing that check has two flaws: - for !HIGHRES the check compares the expiry value with the clock events device expiry value which is wrong for CLOCK_REALTIME based timers. - the check is racy. It holds the hrtimer base lock of the target CPU, but the clock event device expiry value can be modified nevertheless, e.g. by an timer interrupt firing. The !HIGHRES case is easy to fix as we can enqueue the timer on the cpu which was selected by the load balancer. It runs the idle balancing code once per jiffy anyway. So the maximum delay for the timer is the same as when we keep the tick on the current cpu going. In the HIGHRES case we can get the next expiry value from the hrtimer cpu_base of the target CPU and serialize the update with the cpu_base lock. This moves the lock section in hrtimer_interrupt() so we can set next_event to KTIME_MAX while we are handling the expired timers and set it to the next expiry value after we handled the timers under the base lock. While the expired timers are processed timer migration is blocked because the expiry time of the timer is always <= KTIME_MAX. Also remove the now useless clockevents_get_next_event() function. Signed-off-by: Thomas Gleixner --- include/linux/clockchips.h | 9 --------- 1 file changed, 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index 20a100fe2b4..3a1dbba4d3a 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -143,12 +143,3 @@ extern void clockevents_notify(unsigned long reason, void *arg); #endif #endif - -#ifdef CONFIG_GENERIC_CLOCKEVENTS -extern ktime_t clockevents_get_next_event(int cpu); -#else -static inline ktime_t clockevents_get_next_event(int cpu) -{ - return (ktime_t) { .tv64 = KTIME_MAX }; -} -#endif -- cgit v1.2.3 From f9f868dbcca961ed62f1df1d114abd0c38c47dce Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 9 Jul 2009 11:24:26 +0200 Subject: timer stats: fix quick check optimization git commit 507e1231 "timer stats: Optimize by adding quick check to avoid function calls" added one wrong check so that one unnecessary function call isn't elimated. time_stats_account_hrtimer() checks if timer->start_pid isn't initialized in order to find out if timer_stats_update_stats() should be called. However start_pid is initialized with -1 instead of 0, so that the function call always happens. Check timer->start_site like in timer_stats_account_timer() to fix this. Signed-off-by: Heiko Carstens Signed-off-by: Thomas Gleixner --- include/linux/hrtimer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 54648e625ef..4759917adc7 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -448,7 +448,7 @@ extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf, static inline void timer_stats_account_hrtimer(struct hrtimer *timer) { - if (likely(!timer->start_pid)) + if (likely(!timer->start_site)) return; timer_stats_update_stats(timer, timer->start_pid, timer->start_site, timer->function, timer->start_comm, 0); -- cgit v1.2.3 From 8aa7e847d834ed937a9ad37a0f2ad5b8584c1ab0 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 9 Jul 2009 14:52:32 +0200 Subject: Fix congestion_wait() sync/async vs read/write confusion Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: Jens Axboe --- include/linux/backing-dev.h | 6 +++--- include/linux/blkdev.h | 8 ++++---- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 0ec2c594868..3a52a63c135 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -229,9 +229,9 @@ static inline int bdi_rw_congested(struct backing_dev_info *bdi) (1 << BDI_async_congested)); } -void clear_bdi_congested(struct backing_dev_info *bdi, int rw); -void set_bdi_congested(struct backing_dev_info *bdi, int rw); -long congestion_wait(int rw, long timeout); +void clear_bdi_congested(struct backing_dev_info *bdi, int sync); +void set_bdi_congested(struct backing_dev_info *bdi, int sync); +long congestion_wait(int sync, long timeout); static inline bool bdi_cap_writeback_dirty(struct backing_dev_info *bdi) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 49ae07951d5..bb3d3997870 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -779,18 +779,18 @@ extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t, * congested queues, and wake up anyone who was waiting for requests to be * put back. */ -static inline void blk_clear_queue_congested(struct request_queue *q, int rw) +static inline void blk_clear_queue_congested(struct request_queue *q, int sync) { - clear_bdi_congested(&q->backing_dev_info, rw); + clear_bdi_congested(&q->backing_dev_info, sync); } /* * A queue has just entered congestion. Flag that in the queue's VM-visible * state flags and increment the global gounter of congested queues. */ -static inline void blk_set_queue_congested(struct request_queue *q, int rw) +static inline void blk_set_queue_congested(struct request_queue *q, int sync) { - set_bdi_congested(&q->backing_dev_info, rw); + set_bdi_congested(&q->backing_dev_info, sync); } extern void blk_start_queue(struct request_queue *q); -- cgit v1.2.3 From ecb554a846f8e9d2a58f6d6c118168a63ac065aa Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 9 Jul 2009 14:46:53 +0200 Subject: block: fix sg SG_DXFER_TO_FROM_DEV regression I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use the block layer mapping API (2.6.28). Douglas Gilbert explained SG_DXFER_TO_FROM_DEV: http://www.spinics.net/lists/linux-scsi/msg37135.html = The semantics of SG_DXFER_TO_FROM_DEV were: - copy user space buffer to kernel (LLD) buffer - do SCSI command which is assumed to be of the DATA_IN (data from device) variety. This would overwrite some or all of the kernel buffer - copy kernel (LLD) buffer back to the user space. The idea was to detect short reads by filling the original user space buffer with some marker bytes ("0xec" it would seem in this report). The "resid" value is a better way of detecting short reads but that was only added this century and requires co-operation from the LLD. = This patch changes the block layer mapping API to support this semantics. This simply adds another field to struct rq_map_data and enables __bio_copy_iov() to copy data from user space even with READ requests. It's better to add the flags field and kills null_mapped and the new from_user fields in struct rq_map_data but that approach makes it difficult to send this patch to stable trees because st and osst drivers use struct rq_map_data (they were converted to use the block layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer mapping API. zhou sf reported this regiression and tested this patch: http://www.spinics.net/lists/linux-scsi/msg37128.html http://www.spinics.net/lists/linux-scsi/msg37168.html Reported-by: zhou sf Tested-by: zhou sf Cc: stable@kernel.org Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index bb3d3997870..0146e0fecf1 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -723,6 +723,7 @@ struct rq_map_data { int nr_entries; unsigned long offset; int null_mapped; + int from_user; }; struct req_iterator { -- cgit v1.2.3 From c99e6efe1ba04561e7d93a81f0be07e37427e835 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 10 Jul 2009 14:57:56 +0200 Subject: sched: INIT_PREEMPT_COUNT Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra Acked-by: Matt Mackall Signed-off-by: Linus Torvalds --- include/linux/sched.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 0085d758d64..2a99f1c15cf 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -498,6 +498,12 @@ struct task_cputime { .sum_exec_runtime = 0, \ } +/* + * Disable preemption until the scheduler is running. + * Reset by start_kernel()->sched_init()->init_idle(). + */ +#define INIT_PREEMPT_COUNT (1) + /** * struct thread_group_cputimer - thread group interval timer counts * @cputime: thread group interval timers. -- cgit v1.2.3 From d86ee4809d0329d4aa0d0f2c76c2295a16862799 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 10 Jul 2009 14:57:57 +0200 Subject: sched: optimize cond_resched() Optimize cond_resched() by removing one conditional. Currently cond_resched() checks system_state == SYSTEM_RUNNING in order to avoid scheduling before the scheduler is running. We can however, as per suggestion of Matt, use PREEMPT_ACTIVE to accomplish that very same. Suggested-by: Matt Mackall Signed-off-by: Peter Zijlstra Acked-by: Matt Mackall Signed-off-by: Linus Torvalds --- include/linux/sched.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 2a99f1c15cf..16a982e389f 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -501,8 +501,11 @@ struct task_cputime { /* * Disable preemption until the scheduler is running. * Reset by start_kernel()->sched_init()->init_idle(). + * + * We include PREEMPT_ACTIVE to avoid cond_resched() from working + * before the scheduler is active -- see should_resched(). */ -#define INIT_PREEMPT_COUNT (1) +#define INIT_PREEMPT_COUNT (1 + PREEMPT_ACTIVE) /** * struct thread_group_cputimer - thread group interval timer counts -- cgit v1.2.3 From 24a15a62dcb1968bf4ffdae55c88fa934d971180 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 9 Jul 2009 13:36:22 +0100 Subject: tty: Fix USB kref leak The sysrq code acquired a kref leak. Fix it by passing the tty separately from the caller (thus effectively using the callers kref which all the callers hold anyway) Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/usb/serial.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 44801d26a37..0ec50ba6213 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -317,7 +317,8 @@ extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); extern void usb_serial_generic_resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags); -extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port, +extern int usb_serial_handle_sysrq_char(struct tty_struct *tty, + struct usb_serial_port *port, unsigned int ch); extern int usb_serial_handle_break(struct usb_serial_port *port); -- cgit v1.2.3 From 373c0a7ed3ea3b34efedb7c83ffb521adff7c894 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 11 Jul 2009 10:06:54 -0400 Subject: Fix compile error due to congestion_wait() changes Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h so that it is available to all callers of set/clear_bdi_congested(). This replaces commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21 ("fuse: Fix build error"), which will be reverted. Signed-off-by: Trond Myklebust Acked-by: Larry Finger Cc: Jens Axboe Cc: Miklos Szeredi Signed-off-by: Linus Torvalds --- include/linux/backing-dev.h | 5 +++++ include/linux/blkdev.h | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h index 3a52a63c135..1d52425a611 100644 --- a/include/linux/backing-dev.h +++ b/include/linux/backing-dev.h @@ -229,6 +229,11 @@ static inline int bdi_rw_congested(struct backing_dev_info *bdi) (1 << BDI_async_congested)); } +enum { + BLK_RW_ASYNC = 0, + BLK_RW_SYNC = 1, +}; + void clear_bdi_congested(struct backing_dev_info *bdi, int sync); void set_bdi_congested(struct backing_dev_info *bdi, int sync); long congestion_wait(int sync, long timeout); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 0146e0fecf1..e7cb5dbf6c2 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -70,11 +70,6 @@ enum rq_cmd_type_bits { REQ_TYPE_ATA_PC, }; -enum { - BLK_RW_ASYNC = 0, - BLK_RW_SYNC = 1, -}; - /* * For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being * sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a -- cgit v1.2.3 From f9fabcb58a6d26d6efde842d1703ac7cfa9427b6 Mon Sep 17 00:00:00 2001 From: Julien Tinnes Date: Fri, 26 Jun 2009 20:27:40 +0200 Subject: personality: fix PER_CLEAR_ON_SETID We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO. The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE. We believe it is important to add MMAP_PAGE_ZERO, because by using this personality it is possible to have the first page mapped inside a process running as setuid root. This could be used in those scenarios: - Exploiting a NULL pointer dereference issue in a setuid root binary - Bypassing the mmap_min_addr restrictions of the Linux kernel: by running a setuid binary that would drop privileges before giving us control back (for instance by loading a user-supplied library), we could get the first page mapped in a process we control. By further using mremap and mprotect on this mapping, we can then completely bypass the mmap_min_addr restrictions. Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added since on x86 32bits it will in practice disable most of the address space layout randomization (only the stack will remain randomized). Signed-off-by: Julien Tinnes Signed-off-by: Tavis Ormandy Cc: stable@kernel.org Acked-by: Christoph Hellwig Acked-by: Kees Cook Acked-by: Eugene Teo [ Shortened lines and fixed whitespace as per Christophs' suggestion ] Signed-off-by: Linus Torvalds --- include/linux/personality.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/personality.h b/include/linux/personality.h index a84e9ff9b27..126120819a0 100644 --- a/include/linux/personality.h +++ b/include/linux/personality.h @@ -40,7 +40,10 @@ enum { * Security-relevant compatibility flags that must be * cleared upon setuid or setgid exec: */ -#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE) +#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC | \ + ADDR_NO_RANDOMIZE | \ + ADDR_COMPAT_LAYOUT | \ + MMAP_PAGE_ZERO) /* * Personality types. -- cgit v1.2.3 From 405f55712dfe464b3240d7816cc4fe4174831be2 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 11 Jul 2009 22:08:37 +0400 Subject: headers: smp_lock.h redux * Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- include/linux/crash_dump.h | 1 - include/linux/hardirq.h | 2 ++ include/linux/quotaops.h | 1 - include/linux/sunrpc/xdr.h | 1 - 4 files changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h index 2dac064d835..0026f267da2 100644 --- a/include/linux/crash_dump.h +++ b/include/linux/crash_dump.h @@ -3,7 +3,6 @@ #ifdef CONFIG_CRASH_DUMP #include -#include #include #include diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 45257475623..8246c697863 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -2,7 +2,9 @@ #define LINUX_HARDIRQ_H #include +#ifdef CONFIG_PREEMPT #include +#endif #include #include #include diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 7bc45759368..26361c4c037 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -7,7 +7,6 @@ #ifndef _LINUX_QUOTAOPS_ #define _LINUX_QUOTAOPS_ -#include #include static inline struct quota_info *sb_dqopt(struct super_block *sb) diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index d8910b68e1b..b99c625fddf 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -12,7 +12,6 @@ #include #include #include -#include /* * Buffer adjustment -- cgit v1.2.3 From 4ead0a2b6b3aa0b527871ec978c3ef12aafb6bfb Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 2 Jul 2009 23:25:44 +0200 Subject: Driver Core: remove BUS_ID_SIZE The name size limit is gone from the driver-core, this is the removal of the last left-over. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index ed4e39f2c42..aebb81036db 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -25,8 +25,6 @@ #include #include -#define BUS_ID_SIZE 20 - struct device; struct device_private; struct device_driver; -- cgit v1.2.3 From 1a74826fa1cd6c2e382f927403b4440675f0f55a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 23 Jun 2009 15:58:48 -0700 Subject: Revert "USB: Add Intel Langwell USB OTG Transceiver Drive" This reverts commit 453f77558810ffa669ed5a510a7173ec49def396. The driver should not have been accepted as the MSRT code is not in the main kernel yet, which this depends on. Cc: Alan Cox Cc: Hao Wu Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/langwell_otg.h | 177 --------------------------------------- 1 file changed, 177 deletions(-) delete mode 100644 include/linux/usb/langwell_otg.h (limited to 'include/linux') diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h deleted file mode 100644 index e115ae6df1d..00000000000 --- a/include/linux/usb/langwell_otg.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ - -#ifndef __LANGWELL_OTG_H__ -#define __LANGWELL_OTG_H__ - -/* notify transceiver driver about OTG events */ -extern void langwell_update_transceiver(void); -/* HCD register bus driver */ -extern int langwell_register_host(struct pci_driver *host_driver); -/* HCD unregister bus driver */ -extern void langwell_unregister_host(struct pci_driver *host_driver); -/* DCD register bus driver */ -extern int langwell_register_peripheral(struct pci_driver *client_driver); -/* DCD unregister bus driver */ -extern void langwell_unregister_peripheral(struct pci_driver *client_driver); -/* No silent failure, output warning message */ -extern void langwell_otg_nsf_msg(unsigned long message); - -#define CI_USBCMD 0x30 -# define USBCMD_RST BIT(1) -# define USBCMD_RS BIT(0) -#define CI_USBSTS 0x34 -# define USBSTS_SLI BIT(8) -# define USBSTS_URI BIT(6) -# define USBSTS_PCI BIT(2) -#define CI_PORTSC1 0x74 -# define PORTSC_PP BIT(12) -# define PORTSC_LS (BIT(11) | BIT(10)) -# define PORTSC_SUSP BIT(7) -# define PORTSC_CCS BIT(0) -#define CI_HOSTPC1 0xb4 -# define HOSTPC1_PHCD BIT(22) -#define CI_OTGSC 0xf4 -# define OTGSC_DPIE BIT(30) -# define OTGSC_1MSE BIT(29) -# define OTGSC_BSEIE BIT(28) -# define OTGSC_BSVIE BIT(27) -# define OTGSC_ASVIE BIT(26) -# define OTGSC_AVVIE BIT(25) -# define OTGSC_IDIE BIT(24) -# define OTGSC_DPIS BIT(22) -# define OTGSC_1MSS BIT(21) -# define OTGSC_BSEIS BIT(20) -# define OTGSC_BSVIS BIT(19) -# define OTGSC_ASVIS BIT(18) -# define OTGSC_AVVIS BIT(17) -# define OTGSC_IDIS BIT(16) -# define OTGSC_DPS BIT(14) -# define OTGSC_1MST BIT(13) -# define OTGSC_BSE BIT(12) -# define OTGSC_BSV BIT(11) -# define OTGSC_ASV BIT(10) -# define OTGSC_AVV BIT(9) -# define OTGSC_ID BIT(8) -# define OTGSC_HABA BIT(7) -# define OTGSC_HADP BIT(6) -# define OTGSC_IDPU BIT(5) -# define OTGSC_DP BIT(4) -# define OTGSC_OT BIT(3) -# define OTGSC_HAAR BIT(2) -# define OTGSC_VC BIT(1) -# define OTGSC_VD BIT(0) -# define OTGSC_INTEN_MASK (0x7f << 24) -# define OTGSC_INTSTS_MASK (0x7f << 16) -#define CI_USBMODE 0xf8 -# define USBMODE_CM (BIT(1) | BIT(0)) -# define USBMODE_IDLE 0 -# define USBMODE_DEVICE 0x2 -# define USBMODE_HOST 0x3 - -#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI) - -struct otg_hsm { - /* Input */ - int a_bus_resume; - int a_bus_suspend; - int a_conn; - int a_sess_vld; - int a_srp_det; - int a_vbus_vld; - int b_bus_resume; - int b_bus_suspend; - int b_conn; - int b_se0_srp; - int b_sess_end; - int b_sess_vld; - int id; - - /* Internal variables */ - int a_set_b_hnp_en; - int b_srp_done; - int b_hnp_enable; - - /* Timeout indicator for timers */ - int a_wait_vrise_tmout; - int a_wait_bcon_tmout; - int a_aidl_bdis_tmout; - int b_ase0_brst_tmout; - int b_bus_suspend_tmout; - int b_srp_res_tmout; - - /* Informative variables */ - int a_bus_drop; - int a_bus_req; - int a_clr_err; - int a_suspend_req; - int b_bus_req; - - /* Output */ - int drv_vbus; - int loc_conn; - int loc_sof; - - /* Others */ - int b_bus_suspend_vld; -}; - -#define TA_WAIT_VRISE 100 -#define TA_WAIT_BCON 30000 -#define TA_AIDL_BDIS 15000 -#define TB_ASE0_BRST 5000 -#define TB_SE0_SRP 2 -#define TB_SRP_RES 100 -#define TB_BUS_SUSPEND 500 - -struct langwell_otg_timer { - unsigned long expires; /* Number of count increase to timeout */ - unsigned long count; /* Tick counter */ - void (*function)(unsigned long); /* Timeout function */ - unsigned long data; /* Data passed to function */ - struct list_head list; -}; - -struct langwell_otg { - struct otg_transceiver otg; - struct otg_hsm hsm; - void __iomem *regs; - unsigned region; - struct pci_driver *host_ops; - struct pci_driver *client_ops; - struct pci_dev *pdev; - struct work_struct work; - struct workqueue_struct *qwork; - spinlock_t lock; - spinlock_t wq_lock; -}; - -static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg) -{ - return container_of(otg, struct langwell_otg, otg); -} - -#ifdef DEBUG -#define otg_dbg(fmt, args...) \ - printk(KERN_DEBUG fmt , ## args) -#else -#define otg_dbg(fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ -#endif /* __LANGWELL_OTG_H__ */ -- cgit v1.2.3 From e376bbbb6a82cf119c93bde66937f66c72cba27b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Jun 2009 10:39:11 -0700 Subject: USB: usb.h: fix kernel-doc notation Fix usb.h kernel-doc warnings: Warning(include/linux/usb.h:918): Excess struct/union/enum/typedef member 'nodename' description in 'usb_device_driver' Warning(include/linux/usb.h:939): No description found for parameter 'nodename' Warning(include/linux/usb.h:1219): No description found for parameter 'sg' Warning(include/linux/usb.h:1219): No description found for parameter 'num_sgs' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index 84929e91403..b1e3c2fbfe1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -888,8 +888,6 @@ struct usb_driver { * struct usb_device_driver - identifies USB device driver to usbcore * @name: The driver name should be unique among USB drivers, * and should normally be the same as the module name. - * @nodename: Callback to provide a naming hint for a possible - * device node to create. * @probe: Called to see if the driver is willing to manage a particular * device. If it is, probe returns zero and uses dev_set_drvdata() * to associate driver-specific data with the device. If unwilling @@ -924,6 +922,8 @@ extern struct bus_type usb_bus_type; /** * struct usb_class_driver - identifies a USB driver that wants to use the USB major number * @name: the usb class device name for this driver. Will show up in sysfs. + * @nodename: Callback to provide a naming hint for a possible + * device node to create. * @fops: pointer to the struct file_operations of this driver. * @minor_base: the start of the minor range for this driver. * @@ -1046,6 +1046,8 @@ typedef void (*usb_complete_t)(struct urb *); * the device driver is saying that it provided this DMA address, * which the host controller driver should use in preference to the * transfer_buffer. + * @sg: scatter gather buffer list + * @num_sgs: number of entries in the sg list * @transfer_buffer_length: How big is transfer_buffer. The transfer may * be broken up into chunks according to the current maximum packet * size for the endpoint, which is a function of the configuration -- cgit v1.2.3 From 8660c1240ec6016522b882c88751cb4ce40bf0e8 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 13 Jul 2009 22:48:16 +0000 Subject: skbuff.h: Fix comment for NET_IP_ALIGN Use the correct function call for skb_reserve in the comment for NET_IP_ALIGN. Signed-off-by: Tobias Klauser Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index b47b3f039d1..f2c69a2cca1 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1342,12 +1342,12 @@ static inline int skb_network_offset(const struct sk_buff *skb) * shifting the start of the packet by 2 bytes. Drivers should do this * with: * - * skb_reserve(NET_IP_ALIGN); + * skb_reserve(skb, NET_IP_ALIGN); * * The downside to this alignment of the IP header is that the DMA is now * unaligned. On some architectures the cost of an unaligned DMA is high * and this cost outweighs the gains made by aligning the IP header. - * + * * Since this trade off varies between architectures, we allow NET_IP_ALIGN * to be overridden. */ -- cgit v1.2.3 From d0cb43b35d64877b2944bd37719708be5d7bbf99 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 9 Jul 2009 09:27:50 +0900 Subject: libata: implement and use HORKAGE_NOSETXFER, take#2 PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present. The device is SATA and simply skipping SETXFER works around the problem. Implement ATA_HORKAGE_NOSETXFER and apply it to the device. Reported by Moritz Rigler in the following thread. http://thread.gmane.org/gmane.linux.ide/36790 and by Lars in bko#9540. Updated to whine and ignore NOSETXFER if PATA component is detected as suggested by Alan Cox. Signed-off-by: Tejun Heo Reported-by: Moritz Rigler Reported-by: Lars Cc: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 3d501db36a2..79b6d7fd4ac 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -385,6 +385,7 @@ enum { not multiple of 16 bytes */ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */ ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */ + ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ -- cgit v1.2.3 From 43237b5490e8f2f4679decd660064ff35ce490cc Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 20 May 2009 18:41:58 +0200 Subject: ext3: Get rid of extenddisksize parameter of ext3_get_blocks_handle() Get rid of extenddisksize parameter of ext3_get_blocks_handle(). This seems to be a relict from some old days and setting disksize in this function does not make much sence. Currently it was set only by ext3_getblk(). Since the parameter has some effect only if create == 1, it is easy to check that the three callers which end up calling ext3_getblk() with create == 1 (ext3_append, ext3_quota_write, ext3_mkdir) do the right thing and set disksize themselves. Signed-off-by: Jan Kara --- include/linux/ext3_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index 634a5e5aba3..7499b366779 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -874,7 +874,7 @@ struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *); struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *); int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, - int create, int extend_disksize); + int create); extern struct inode *ext3_iget(struct super_block *, unsigned long); extern int ext3_write_inode (struct inode *, int); -- cgit v1.2.3 From 5c9228f0cfb09a098a8a380116b42ae099e967b6 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 16 Jul 2009 16:06:09 +0100 Subject: vt: drop bootmem/slab memory distinction Bootmem is not used for the vt screen buffer anymore as slab is now available at the time the console is initialized. Get rid of the now superfluous distinction between slab and bootmem, it's always slab. This also fixes a kmalloc leak which Catalin described thusly: Commit a5f4f52e ("vt: use kzalloc() instead of the bootmem allocator") replaced the alloc_bootmem() with kzalloc() but didn't set vc_kmalloced to 1 and the memory block is later leaked. The corresponding kmemleak trace: unreferenced object 0xdf828000 (size 8192): comm "swapper", pid 0, jiffies 4294937296 backtrace: [] __save_stack_trace+0x17/0x1c [] log_early+0x55/0x84 [] kmemleak_alloc+0x33/0x3c [] __kmalloc+0xd7/0xe4 [] con_init+0xbf/0x1b8 [] console_init+0x11/0x20 [] start_kernel+0x137/0x1e4 Signed-off-by: Johannes Weiner Reviewed-by: Pekka Enberg Tested-by: Catalin Marinas Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/console_struct.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index d71f7c0f931..38fe59dc89a 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -89,7 +89,6 @@ struct vc_data { unsigned int vc_need_wrap : 1; unsigned int vc_can_do_color : 1; unsigned int vc_report_mouse : 2; - unsigned int vc_kmalloced : 1; unsigned char vc_utf : 1; /* Unicode UTF-8 encoding */ unsigned char vc_utf_count; int vc_utf_char; -- cgit v1.2.3 From 5780888bcac316508eb5f4dd23bbea8b5057647c Mon Sep 17 00:00:00 2001 From: Matias Zabaljauregui Date: Thu, 18 Jun 2009 11:44:06 -0300 Subject: lguest: fix journey fix: "make Guest" was complaining about duplicated G:032 Signed-off-by: Matias Zabaljauregui Signed-off-by: Rusty Russell --- include/linux/lguest.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/lguest.h b/include/linux/lguest.h index 7bc1440fc47..dbf2479e808 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -11,7 +11,7 @@ #define LG_CLOCK_MIN_DELTA 100UL #define LG_CLOCK_MAX_DELTA ULONG_MAX -/*G:032 The second method of communicating with the Host is to via "struct +/*G:031 The second method of communicating with the Host is to via "struct * lguest_data". Once the Guest's initialization hypercall tells the Host where * this is, the Guest and Host both publish information in it. :*/ struct lguest_data -- cgit v1.2.3 From e79f07e2925b10f09a2621650c16f3d6ea778747 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 7 Jul 2009 08:47:10 -0600 Subject: virtio_net: Sync header with qemu Qemu added support for a few extra RX modes that Linux doesn't currently make use of. Sync the headers to maintain consistency. Signed-off-by: Alex Williamson Signed-off-by: Rusty Russell --- include/linux/virtio_net.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index cec79adbe3e..9c543d6ac53 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -27,6 +27,7 @@ #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ +#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ @@ -81,14 +82,19 @@ typedef __u8 virtio_net_ctrl_ack; #define VIRTIO_NET_ERR 1 /* - * Control the RX mode, ie. promisucous and allmulti. PROMISC and - * ALLMULTI commands require an "out" sg entry containing a 1 byte - * state value, zero = disable, non-zero = enable. These commands - * are supported with the VIRTIO_NET_F_CTRL_RX feature. + * Control the RX mode, ie. promisucous, allmulti, etc... + * All commands require an "out" sg entry containing a 1 byte + * state value, zero = disable, non-zero = enable. Commands + * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. + * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. */ #define VIRTIO_NET_CTRL_RX 0 #define VIRTIO_NET_CTRL_RX_PROMISC 0 #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 + #define VIRTIO_NET_CTRL_RX_ALLUNI 2 + #define VIRTIO_NET_CTRL_RX_NOMULTI 3 + #define VIRTIO_NET_CTRL_RX_NOUNI 4 + #define VIRTIO_NET_CTRL_RX_NOBCAST 5 /* * Control the MAC filter table. -- cgit v1.2.3 From 6301cb95c119ebf324bb96ee226fa9ddffad80a7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 17 Jul 2009 14:15:47 +0200 Subject: sched: fix nr_uninterruptible accounting of frozen tasks really commit e3c8ca8336 (sched: do not count frozen tasks toward load) broke the nr_uninterruptible accounting on freeze/thaw. On freeze the task is excluded from accounting with a check for (task->flags & PF_FROZEN), but that flag is cleared before the task is thawed. So while we prevent that the task with state TASK_UNINTERRUPTIBLE is accounted to nr_uninterruptible on freeze we decrement nr_uninterruptible on thaw. Use a separate flag which is handled by the freezing task itself. Set it before calling the scheduler with TASK_UNINTERRUPTIBLE state and clear it after we return from frozen state. Cc: Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sched.h b/include/linux/sched.h index 16a982e389f..3ab08e4bb6b 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -209,7 +209,7 @@ extern unsigned long long time_sync_thresh; ((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0) #define task_contributes_to_load(task) \ ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \ - (task->flags & PF_FROZEN) == 0) + (task->flags & PF_FREEZING) == 0) #define __set_task_state(tsk, state_value) \ do { (tsk)->state = (state_value); } while (0) @@ -1680,6 +1680,7 @@ extern cputime_t task_gtime(struct task_struct *p); #define PF_MEMALLOC 0x00000800 /* Allocating memory */ #define PF_FLUSHER 0x00001000 /* responsible for disk writeback */ #define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */ +#define PF_FREEZING 0x00004000 /* freeze in progress. do not account to load */ #define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */ #define PF_FROZEN 0x00010000 /* frozen for system suspend */ #define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */ -- cgit v1.2.3 From 591d2fb02ea80472d846c0b8507007806bdd69cc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 21 Jul 2009 11:09:39 +0200 Subject: genirq: Delegate irq affinity setting to the irq thread irq_set_thread_affinity() calls set_cpus_allowed_ptr() which might sleep, but irq_set_thread_affinity() is called with desc->lock held and can be called from hard interrupt context as well. The code has another bug as it does not hold a ref on the task struct as required by set_cpus_allowed_ptr(). Just set the IRQTF_AFFINITY bit in action->thread_flags. The next time the thread runs it migrates itself. Solves all of the above problems nicely. Add kerneldoc to irq_set_thread_affinity() while at it. Signed-off-by: Thomas Gleixner LKML-Reference: --- include/linux/interrupt.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 2721f07e935..88b056ac562 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -64,11 +64,13 @@ * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run * IRQTF_DIED - handler thread died * IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed + * IRQTF_AFFINITY - irq thread is requested to adjust affinity */ enum { IRQTF_RUNTHREAD, IRQTF_DIED, IRQTF_WARNED, + IRQTF_AFFINITY, }; typedef irqreturn_t (*irq_handler_t)(int, void *); -- cgit v1.2.3 From e56f0975360369347725c49654ecfe3792710429 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Sat, 18 Jul 2009 19:20:20 +0100 Subject: rfkill: remove too-strict __must_check Some drivers don't need the return value of rfkill_set_hw_state(), so it should not be marked as __must_check. Signed-off-by: Alan Jenkins Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/rfkill.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 2ce29831feb..278777fa8a3 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -224,7 +224,7 @@ void rfkill_destroy(struct rfkill *rfkill); * should be blocked) so that drivers need not keep track of the soft * block state -- which they might not be able to. */ -bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); +bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); /** * rfkill_set_sw_state - Set the internal rfkill software block state -- cgit v1.2.3 From f44aebcc566d1d6275f7191867b9633dc11de2ee Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 15 Jul 2009 15:49:52 -0400 Subject: inotify: use GFP_NOFS under potential memory pressure inotify can have a watchs removed under filesystem reclaim. ================================= [ INFO: inconsistent lock state ] 2.6.31-rc2 #16 --------------------------------- inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. khubd/217 [HC0[0]:SC0[0]:HE1:SE1] takes: (iprune_mutex){+.+.?.}, at: [] invalidate_inodes+0x20/0xe3 {IN-RECLAIM_FS-W} state was registered at: [] __lock_acquire+0x2c9/0xac4 [] lock_acquire+0x9f/0xc2 [] __mutex_lock_common+0x2d/0x323 [] mutex_lock_nested+0x2e/0x36 [] shrink_icache_memory+0x38/0x1b2 [] shrink_slab+0xe2/0x13c [] kswapd+0x3d1/0x55d [] kthread+0x66/0x6b [] kernel_thread_helper+0x7/0x10 [] 0xffffffff Two things are needed to fix this. First we need a method to tell fsnotify_create_event() to use GFP_NOFS and second we need to stop using one global IN_IGNORED event and allocate them one at a time. This solves current issues with multiple IN_IGNORED on a queue having tail drop problems and simplifies the allocations since we don't have to worry about two tasks opperating on the IGNORED event concurrently. Signed-off-by: Eric Paris --- include/linux/fsnotify_backend.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index 6c3de999fb3..4d6f47b5118 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -352,7 +352,7 @@ extern void fsnotify_unmount_inodes(struct list_head *list); /* put here because inotify does some weird stuff when destroying watches */ extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data, int data_is, const char *name, - u32 cookie); + u32 cookie, gfp_t gfp); #else -- cgit v1.2.3 From 9ba5f005c994ad28e266a0cd14ef29354be382c9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 22 Jul 2009 14:18:35 +0200 Subject: softirq: introduce tasklet_hrtimer infrastructure commit ca109491f (hrtimer: removing all ur callback modes) moved all hrtimer callbacks into hard interrupt context when high resolution timers are active. That breaks code which relied on the assumption that the callback happens in softirq context. Provide a generic infrastructure which combines tasklets and hrtimers together to provide an in-softirq hrtimer experience. Signed-off-by: Peter Zijlstra Cc: torvalds@linux-foundation.org Cc: kaber@trash.net Cc: David Miller LKML-Reference: <1248265724.27058.1366.camel@twins> Signed-off-by: Thomas Gleixner --- include/linux/interrupt.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'include/linux') diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 2721f07e935..fd4c9c63c75 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -517,6 +518,31 @@ extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu); extern void tasklet_init(struct tasklet_struct *t, void (*func)(unsigned long), unsigned long data); +struct tasklet_hrtimer { + struct hrtimer timer; + struct tasklet_struct tasklet; + enum hrtimer_restart (*function)(struct hrtimer *); +}; + +extern void +tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, + enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t which_clock, enum hrtimer_mode mode); + +static inline +int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time, + const enum hrtimer_mode mode) +{ + return hrtimer_start(&ttimer->timer, time, mode); +} + +static inline +void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer) +{ + hrtimer_cancel(&ttimer->timer); + tasklet_kill(&ttimer->tasklet); +} + /* * Autoprobing for irqs: * -- cgit v1.2.3 From 7f453c24b95a085fc7bd35d53b33abc4dc5a048b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 21 Jul 2009 13:19:40 +0200 Subject: perf_counter: PERF_SAMPLE_ID and inherited counters Anton noted that for inherited counters the counter-id as provided by PERF_SAMPLE_ID isn't mappable to the id found through PERF_RECORD_ID because each inherited counter gets its own id. His suggestion was to always return the parent counter id, since that is the primary counter id as exposed. However, these inherited counters have a unique identifier so that events like PERF_EVENT_PERIOD and PERF_EVENT_THROTTLE can be specific about which counter gets modified, which is important when trying to normalize the sample streams. This patch removes PERF_EVENT_PERIOD in favour of PERF_SAMPLE_PERIOD, which is more useful anyway, since changing periods became a lot more common than initially thought -- rendering PERF_EVENT_PERIOD the less useful solution (also, PERF_SAMPLE_PERIOD reports the more accurate value, since it reports the value used to trigger the overflow, whereas PERF_EVENT_PERIOD simply reports the requested period changed, which might only take effect on the next cycle). This still leaves us PERF_EVENT_THROTTLE to consider, but since that _should_ be a rare occurrence, and linking it to a primary id is the most useful bit to diagnose the problem, we introduce a PERF_SAMPLE_STREAM_ID, for those few cases where the full reconstruction is important. [Does change the ABI a little, but I see no other way out] Suggested-by: Anton Blanchard Signed-off-by: Peter Zijlstra LKML-Reference: <1248095846.15751.8781.camel@twins> --- include/linux/perf_counter.h | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 5e970c7d3fd..bd15d7a5f5c 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -120,8 +120,9 @@ enum perf_counter_sample_format { PERF_SAMPLE_ID = 1U << 6, PERF_SAMPLE_CPU = 1U << 7, PERF_SAMPLE_PERIOD = 1U << 8, + PERF_SAMPLE_STREAM_ID = 1U << 9, - PERF_SAMPLE_MAX = 1U << 9, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 10, /* non-ABI */ }; /* @@ -312,16 +313,7 @@ enum perf_event_type { * struct perf_event_header header; * u64 time; * u64 id; - * u64 sample_period; - * }; - */ - PERF_EVENT_PERIOD = 4, - - /* - * struct { - * struct perf_event_header header; - * u64 time; - * u64 id; + * u64 stream_id; * }; */ PERF_EVENT_THROTTLE = 5, @@ -356,6 +348,7 @@ enum perf_event_type { * { u64 time; } && PERF_SAMPLE_TIME * { u64 addr; } && PERF_SAMPLE_ADDR * { u64 id; } && PERF_SAMPLE_ID + * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID * { u32 cpu, res; } && PERF_SAMPLE_CPU * { u64 period; } && PERF_SAMPLE_PERIOD * -- cgit v1.2.3 From 24c30dbbcdda9aeccb23b4eecb6bb8e538742ea4 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Jul 2009 21:31:31 +0000 Subject: of/mdio: Add support function for Ethernet fixed-link property Fixed-link support is broken for the ucc_eth, gianfar, and fs_enet device drivers. The "OF MDIO rework" patches removed most of the support. Instead of re-adding fixed-link stuff to the drivers, this patch adds a support function for parsing the fixed-link property and obtaining a dummy phy to match. Note: the dummy phy handling in arch/powerpc is a bit of a hack and needs to be reworked. This function is being added now to solve the regression in the Ethernet drivers, but it should be considered a temporary measure until the fixed link handling can be reworked. Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- include/linux/of_mdio.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h index c9663c69030..53b94e025c7 100644 --- a/include/linux/of_mdio.h +++ b/include/linux/of_mdio.h @@ -18,5 +18,8 @@ extern struct phy_device *of_phy_connect(struct net_device *dev, struct device_node *phy_np, void (*hndlr)(struct net_device *), u32 flags, phy_interface_t iface); +extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev, + void (*hndlr)(struct net_device *), + phy_interface_t iface); #endif /* __LINUX_OF_MDIO_H */ -- cgit v1.2.3 From 5dea271b6d87bd1d79a59c1d5baac2596a841c37 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 23 Jul 2009 20:30:42 +0100 Subject: dm table: pass correct dev area size to device_area_is_valid Incorrect device area lengths are being passed to device_area_is_valid(). The regression appeared in 2.6.31-rc1 through commit 754c5fc7ebb417b23601a6222a6005cc2e7f2913. With the dm-stripe target, the size of the target (ti->len) was used instead of the stripe_width (ti->len/#stripes). An example of a consequent incorrect error message is: device-mapper: table: 254:0: sdb too small for target Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 0d6310657f3..655e7721580 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -84,7 +84,7 @@ typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm, typedef int (*iterate_devices_callout_fn) (struct dm_target *ti, struct dm_dev *dev, - sector_t physical_start, + sector_t start, sector_t len, void *data); typedef int (*dm_iterate_devices_fn) (struct dm_target *ti, @@ -104,7 +104,7 @@ void dm_error(const char *message); * Combine device limits. */ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev, - sector_t start, void *data); + sector_t start, sector_t len, void *data); struct dm_dev { struct block_device *bdev; -- cgit v1.2.3 From 26e744b6b61066203fd57de0d3962353621e06f8 Mon Sep 17 00:00:00 2001 From: Brian Johnson Date: Sun, 19 Jul 2009 05:52:58 -0300 Subject: V4L/DVB (12283): gspca - sn9c20x: New subdriver for sn9c201 and sn9c202 bridges. Signed-off-by: Brian Johnson Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- include/linux/videodev2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 95846d98801..74f16876f38 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -338,6 +338,7 @@ struct v4l2_pix_format { /* Vendor-specific formats */ #define V4L2_PIX_FMT_WNVA v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ #define V4L2_PIX_FMT_SN9C10X v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ +#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ #define V4L2_PIX_FMT_PWC1 v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */ #define V4L2_PIX_FMT_PWC2 v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */ #define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */ -- cgit v1.2.3 From 27fed4175acf81ddd91d9a4ee2fd298981f60295 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 27 Jul 2009 18:39:45 -0700 Subject: ip: fix logic of reverse path filter sysctl Even though reverse path filter was changed from simple boolean to trinary control, the loose mode only works if both all and device are configured because of this logic error. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- include/linux/inetdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index acef2a770b6..ad27c7da879 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -82,7 +82,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev) #define IN_DEV_FORWARD(in_dev) IN_DEV_CONF_GET((in_dev), FORWARDING) #define IN_DEV_MFORWARD(in_dev) IN_DEV_ANDCONF((in_dev), MC_FORWARDING) -#define IN_DEV_RPFILTER(in_dev) IN_DEV_ANDCONF((in_dev), RP_FILTER) +#define IN_DEV_RPFILTER(in_dev) IN_DEV_MAXCONF((in_dev), RP_FILTER) #define IN_DEV_SOURCE_ROUTE(in_dev) IN_DEV_ANDCONF((in_dev), \ ACCEPT_SOURCE_ROUTE) #define IN_DEV_BOOTP_RELAY(in_dev) IN_DEV_ANDCONF((in_dev), BOOTP_RELAY) -- cgit v1.2.3 From 5920dadfb4aec6c1372c5570e71bcd3b4837e63c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Jul 2009 17:11:41 +0900 Subject: libata: accept late unlocking of HPA On certain configurations, HPA isn't or can't be unlocked during probing but it somehow ends up unlocked afterwards. In the following thread, the problem can be reliably reproduced after resuming from STR. The BIOS turns on HPA during boot but forgets to do it during resume. http://thread.gmane.org/gmane.linux.kernel/858310 This patch updates libata revalidation such that it considers native n_sectors. If the device size has increased to match native n_sectors, it's assumed that HPA has been unlocked involuntarily and the device is recognized as the same one. This should be fairly safe while nicely working around the problem. Signed-off-by: Tejun Heo Reported-by: Christof Warlich Signed-off-by: Jeff Garzik --- include/linux/libata.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index 79b6d7fd4ac..e5b6e33c657 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -589,6 +589,7 @@ struct ata_device { #endif /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ + u64 n_native_sectors; /* native size, if ATA */ unsigned int class; /* ATA_DEV_xxx */ unsigned long unpark_deadline; -- cgit v1.2.3 From dddac6a7b445de95515f64fdf82fe5dc36c02f26 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Wed, 29 Jul 2009 21:07:55 +0200 Subject: PM / Hibernate: Replace bdget call with simple atomic_inc of i_count Create bdgrab(). This function copies an existing reference to a block_device. It is safe to call from any context. Hibernation code wishes to copy a reference to the active swap device. Right now it calls bdget() under a spinlock, but this is wrong because bdget() can sleep. It doesn't need a full bdget() because we already hold a reference to active swap devices (and the spinlock protects against swapoff). Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13827 Signed-off-by: Alan Jenkins Signed-off-by: Rafael J. Wysocki --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 0872372184f..a36ffa5a77a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1946,6 +1946,7 @@ extern void putname(const char *name); extern int register_blkdev(unsigned int, const char *); extern void unregister_blkdev(unsigned int, const char *); extern struct block_device *bdget(dev_t); +extern struct block_device *bdgrab(struct block_device *bdev); extern void bd_set_size(struct block_device *, loff_t size); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); -- cgit v1.2.3 From e043e42bdb66885b3ac10d27a01ccb9972e2b0a3 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Wed, 29 Jul 2009 12:15:56 -0700 Subject: pty: avoid forcing 'low_latency' tty flag We really don't want to mark the pty as a low-latency device, because as Alan points out, the ->write method can be called from an IRQ (ppp?), and that means we can't use ->low_latency=1 as we take mutexes in the low_latency case. So rather than using low_latency to force the written data to be pushed to the ldisc handling at 'write()' time, just make the reader side (or the poll function) do the flush when it checks whether there is data to be had. This also fixes the problem with lost data in an emacs compile buffer (bugzilla 13815), and we can thus revert the low_latency pty hack (commit 3a54297478e6578f96fd54bf4daa1751130aca86: "pty: quickfix for the pty ENXIO timing problems"). Signed-off-by: OGAWA Hirofumi Tested-by: Aneesh Kumar K.V [ Modified to do the tty_flush_to_ldisc() inside input_available_p() so that it triggers for both read and poll() - Linus] Signed-off-by: Linus Torvalds --- include/linux/tty.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/tty.h b/include/linux/tty.h index 1488d8c81aa..e8c6c9136c9 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -394,6 +394,7 @@ extern void __do_SAK(struct tty_struct *tty); extern void disassociate_ctty(int priv); extern void no_tty(void); extern void tty_flip_buffer_push(struct tty_struct *tty); +extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_struct *tty); extern void tty_buffer_flush(struct tty_struct *tty); extern void tty_buffer_init(struct tty_struct *tty); -- cgit v1.2.3 From 096b7fe012d66ed55e98bc8022405ede0cc80e96 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 29 Jul 2009 15:04:04 -0700 Subject: cgroups: fix pid namespace bug The bug was introduced by commit cc31edceee04a7b87f2be48f9489ebb72d264844 ("cgroups: convert tasks file to use a seq_file with shared pid array"). We cache a pid array for all threads that are opening the same "tasks" file, but the pids in the array are always from the namespace of the last process that opened the file, so all other threads will read pids from that namespace instead of their own namespaces. To fix it, we maintain a list of pid arrays, which is keyed by pid_ns. The list will be of length 1 at most time. Reported-by: Paul Menage Idea-by: Paul Menage Signed-off-by: Li Zefan Reviewed-by: Serge Hallyn Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 665fa70e409..20411d2876f 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -179,14 +179,11 @@ struct cgroup { */ struct list_head release_list; - /* pids_mutex protects the fields below */ + /* pids_mutex protects pids_list and cached pid arrays. */ struct rw_semaphore pids_mutex; - /* Array of process ids in the cgroup */ - pid_t *tasks_pids; - /* How many files are using the current tasks_pids array */ - int pids_use_count; - /* Length of the current tasks_pids array */ - int pids_length; + + /* Linked list of struct cgroup_pids */ + struct list_head pids_list; /* For RCU-protected deletion */ struct rcu_head rcu_head; -- cgit v1.2.3 From 887032670d47366a8c8f25396ea7c14b7b2cc620 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 29 Jul 2009 15:04:06 -0700 Subject: cgroup avoid permanent sleep at rmdir After commit ec64f51545fffbc4cb968f0cea56341a4b07e85a ("cgroup: fix frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg) doesn't return -EBUSY by temporary ref counts. That commit expects all refs after pre_destroy() is temporary but...it wasn't. Then, rmdir can wait permanently. This patch tries to fix that and change followings. - set CGRP_WAIT_ON_RMDIR flag before pre_destroy(). - clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case. if there are sleeping ones, wakes them up. - rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set. Tested-by: Daisuke Nishimura Reported-by: Daisuke Nishimura Reviewed-by: Paul Menage Acked-by: Balbir Sigh Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cgroup.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/linux') diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 20411d2876f..90bba9e6228 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -362,6 +362,23 @@ int cgroup_task_count(const struct cgroup *cgrp); /* Return true if cgrp is a descendant of the task's cgroup */ int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task); +/* + * When the subsys has to access css and may add permanent refcnt to css, + * it should take care of racy conditions with rmdir(). Following set of + * functions, is for stop/restart rmdir if necessary. + * Because these will call css_get/put, "css" should be alive css. + * + * cgroup_exclude_rmdir(); + * ...do some jobs which may access arbitrary empty cgroup + * cgroup_release_and_wakeup_rmdir(); + * + * When someone removes a cgroup while cgroup_exclude_rmdir() holds it, + * it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up. + */ + +void cgroup_exclude_rmdir(struct cgroup_subsys_state *css); +void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css); + /* * Control Group subsystem type. * See Documentation/cgroups/cgroups.txt for details -- cgit v1.2.3 From f5a55efa140f5e9c9dd0f398fef54f20cdb74ec9 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 29 Jul 2009 15:04:12 -0700 Subject: pps.h needs Found with make headers_check /usr/include/linux/pps.h:52: found __[us]{8,16,32,64} type without #include Signed-off-by: Dave Jones Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pps.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pps.h b/include/linux/pps.h index cfe5c7214ec..0194ab06177 100644 --- a/include/linux/pps.h +++ b/include/linux/pps.h @@ -22,6 +22,8 @@ #ifndef _PPS_H_ #define _PPS_H_ +#include + #define PPS_VERSION "5.3.6" #define PPS_MAX_SOURCES 16 /* should be enough... */ -- cgit v1.2.3 From 534acc057b5a08ec33fa57cdd2f5a09ef124e7f2 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Wed, 29 Jul 2009 15:04:18 -0700 Subject: lib: flexible array implementation Once a structure goes over PAGE_SIZE*2, we see occasional allocation failures. Some people have chosen to switch over to things like vmalloc() that will let them keep array-like access to such a large structures. But, vmalloc() has plenty of downsides. Here's an alternative. I think it's what Andrew was suggesting here: http://lkml.org/lkml/2009/7/2/518 I call it a flexible array. It does all of its work in PAGE_SIZE bits, so never does an order>0 allocation. The base level has PAGE_SIZE-2*sizeof(int) bytes of storage for pointers to the second level. So, with a 32-bit arch, you get about 4MB (4183112 bytes) of total storage when the objects pack nicely into a page. It is half that on 64-bit because the pointers are twice the size. There's a table detailing this in the code. There are kerneldocs for the functions, but here's an overview: flex_array_alloc() - dynamically allocate a base structure flex_array_free() - free the array and all of the second-level pages flex_array_free_parts() - free the second-level pages, but not the base (for static bases) flex_array_put() - copy into the array at the given index flex_array_get() - copy out of the array at the given index flex_array_prealloc() - preallocate the second-level pages between the given indexes to guarantee no allocs will occur at put() time. We could also potentially just pass the "element_size" into each of the API functions instead of storing it internally. That would get us one more base pointer on 32-bit. I've been testing this by running it in userspace. The header and patch that I've been using are here, as well as the little script I'm using to generate the size table which goes in the kerneldocs. http://sr71.net/~dave/linux/flexarray/ [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Hansen Reviewed-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/flex_array.h | 47 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 include/linux/flex_array.h (limited to 'include/linux') diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h new file mode 100644 index 00000000000..23c1ec79a31 --- /dev/null +++ b/include/linux/flex_array.h @@ -0,0 +1,47 @@ +#ifndef _FLEX_ARRAY_H +#define _FLEX_ARRAY_H + +#include +#include + +#define FLEX_ARRAY_PART_SIZE PAGE_SIZE +#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE + +struct flex_array_part; + +/* + * This is meant to replace cases where an array-like + * structure has gotten too big to fit into kmalloc() + * and the developer is getting tempted to use + * vmalloc(). + */ + +struct flex_array { + union { + struct { + int element_size; + int total_nr_elements; + struct flex_array_part *parts[0]; + }; + /* + * This little trick makes sure that + * sizeof(flex_array) == PAGE_SIZE + */ + char padding[FLEX_ARRAY_BASE_SIZE]; + }; +}; + +#define FLEX_ARRAY_INIT(size, total) { { {\ + .element_size = (size), \ + .total_nr_elements = (total), \ +} } } + +struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags); +int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags); +void flex_array_free(struct flex_array *fa); +void flex_array_free_parts(struct flex_array *fa); +int flex_array_put(struct flex_array *fa, int element_nr, void *src, + gfp_t flags); +void *flex_array_get(struct flex_array *fa, int element_nr); + +#endif /* _FLEX_ARRAY_H */ -- cgit v1.2.3 From 812ed032cdc8138b7546eecc996879756b92d801 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 29 Jul 2009 15:04:19 -0700 Subject: uio: mark uio.h functions __KERNEL__ only To avoid userspace build failures such as: .../linux/uio.h:37: error: expected `=', `,', `;', `asm' or `__attribute__' before `iov_length' .../linux/uio.h:47: error: expected declaration specifiers or `...' before `size_t' move uio functions inside a __KERNEL__ block. Signed-off-by: Jiri Slaby Acked-by: Sam Ravnborg Cc: Alexander Viro Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/uio.h | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/uio.h b/include/linux/uio.h index b7fe13883bd..98c114323a8 100644 --- a/include/linux/uio.h +++ b/include/linux/uio.h @@ -19,15 +19,6 @@ struct iovec __kernel_size_t iov_len; /* Must be size_t (1003.1g) */ }; -#ifdef __KERNEL__ - -struct kvec { - void *iov_base; /* and that should *never* hold a userland pointer */ - size_t iov_len; -}; - -#endif - /* * UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1) */ @@ -35,6 +26,13 @@ struct kvec { #define UIO_FASTIOV 8 #define UIO_MAXIOV 1024 +#ifdef __KERNEL__ + +struct kvec { + void *iov_base; /* and that should *never* hold a userland pointer */ + size_t iov_len; +}; + /* * Total number of bytes covered by an iovec. * @@ -53,5 +51,6 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs) } unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to); +#endif #endif -- cgit v1.2.3 From 2e04ef76916d1e29a077ea9d0f2003c8fd86724d Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 Jul 2009 16:03:45 -0600 Subject: lguest: fix comment style I don't really notice it (except to begrudge the extra vertical space), but Ingo does. And he pointed out that one excuse of lguest is as a teaching tool, it should set a good example. Signed-off-by: Rusty Russell Cc: Ingo Molnar --- include/linux/lguest.h | 36 ++++++++++++++++++++++++------------ include/linux/lguest_launcher.h | 18 ++++++++++++------ 2 files changed, 36 insertions(+), 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/lguest.h b/include/linux/lguest.h index dbf2479e808..0a3a11afd64 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -1,5 +1,7 @@ -/* Things the lguest guest needs to know. Note: like all lguest interfaces, - * this is subject to wild and random change between versions. */ +/* + * Things the lguest guest needs to know. Note: like all lguest interfaces, + * this is subject to wild and random change between versions. + */ #ifndef _LINUX_LGUEST_H #define _LINUX_LGUEST_H @@ -11,32 +13,42 @@ #define LG_CLOCK_MIN_DELTA 100UL #define LG_CLOCK_MAX_DELTA ULONG_MAX -/*G:031 The second method of communicating with the Host is to via "struct +/*G:031 + * The second method of communicating with the Host is to via "struct * lguest_data". Once the Guest's initialization hypercall tells the Host where - * this is, the Guest and Host both publish information in it. :*/ + * this is, the Guest and Host both publish information in it. +:*/ struct lguest_data { - /* 512 == enabled (same as eflags in normal hardware). The Guest - * changes interrupts so often that a hypercall is too slow. */ + /* + * 512 == enabled (same as eflags in normal hardware). The Guest + * changes interrupts so often that a hypercall is too slow. + */ unsigned int irq_enabled; /* Fine-grained interrupt disabling by the Guest */ DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS); - /* The Host writes the virtual address of the last page fault here, + /* + * The Host writes the virtual address of the last page fault here, * which saves the Guest a hypercall. CR2 is the native register where - * this address would normally be found. */ + * this address would normally be found. + */ unsigned long cr2; /* Wallclock time set by the Host. */ struct timespec time; - /* Interrupt pending set by the Host. The Guest should do a hypercall - * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */ + /* + * Interrupt pending set by the Host. The Guest should do a hypercall + * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). + */ int irq_pending; - /* Async hypercall ring. Instead of directly making hypercalls, we can + /* + * Async hypercall ring. Instead of directly making hypercalls, we can * place them in here for processing the next time the Host wants. - * This batching can be quite efficient. */ + * This batching can be quite efficient. + */ /* 0xFF == done (set by Host), 0 == pending (set by Guest). */ u8 hcall_status[LHCALL_RING_SIZE]; diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h index bfefbdf7498..495203ff221 100644 --- a/include/linux/lguest_launcher.h +++ b/include/linux/lguest_launcher.h @@ -29,8 +29,10 @@ struct lguest_device_desc { __u8 type; /* The number of virtqueues (first in config array) */ __u8 num_vq; - /* The number of bytes of feature bits. Multiply by 2: one for host - * features and one for Guest acknowledgements. */ + /* + * The number of bytes of feature bits. Multiply by 2: one for host + * features and one for Guest acknowledgements. + */ __u8 feature_len; /* The number of bytes of the config array after virtqueues. */ __u8 config_len; @@ -39,8 +41,10 @@ struct lguest_device_desc { __u8 config[0]; }; -/*D:135 This is how we expect the device configuration field for a virtqueue - * to be laid out in config space. */ +/*D:135 + * This is how we expect the device configuration field for a virtqueue + * to be laid out in config space. + */ struct lguest_vqconfig { /* The number of entries in the virtio_ring */ __u16 num; @@ -61,7 +65,9 @@ enum lguest_req LHREQ_EVENTFD, /* + address, fd. */ }; -/* The alignment to use between consumer and producer parts of vring. - * x86 pagesize for historical reasons. */ +/* + * The alignment to use between consumer and producer parts of vring. + * x86 pagesize for historical reasons. + */ #define LGUEST_VRING_ALIGN 4096 #endif /* _LINUX_LGUEST_LAUNCHER */ -- cgit v1.2.3 From 1842f23c05b6a866be831aa60bc8a8731c58ddd0 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 30 Jul 2009 16:03:46 -0600 Subject: lguest and virtio: cleanup struct definitions to Linux style. I've been doing this for years, and akpm picked me up on it about 12 months ago. lguest partly serves as example code, so let's do it Right. Also, remove two unused fields in struct vblk_info in the example launcher. Signed-off-by: Rusty Russell Cc: Ingo Molnar --- include/linux/lguest.h | 3 +-- include/linux/virtio_blk.h | 6 ++---- include/linux/virtio_config.h | 3 +-- include/linux/virtio_net.h | 6 ++---- include/linux/virtio_ring.h | 12 ++++-------- 5 files changed, 10 insertions(+), 20 deletions(-) (limited to 'include/linux') diff --git a/include/linux/lguest.h b/include/linux/lguest.h index 0a3a11afd64..2fb1dcbcb5a 100644 --- a/include/linux/lguest.h +++ b/include/linux/lguest.h @@ -18,8 +18,7 @@ * lguest_data". Once the Guest's initialization hypercall tells the Host where * this is, the Guest and Host both publish information in it. :*/ -struct lguest_data -{ +struct lguest_data { /* * 512 == enabled (same as eflags in normal hardware). The Guest * changes interrupts so often that a hypercall is too slow. diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index be7d255fc7c..8dab9f2b883 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -20,8 +20,7 @@ #define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */ -struct virtio_blk_config -{ +struct virtio_blk_config { /* The capacity (in 512-byte sectors). */ __u64 capacity; /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ @@ -50,8 +49,7 @@ struct virtio_blk_config #define VIRTIO_BLK_T_BARRIER 0x80000000 /* This is the first element of the read scatter-gather list. */ -struct virtio_blk_outhdr -{ +struct virtio_blk_outhdr { /* VIRTIO_BLK_T* */ __u32 type; /* io priority. */ diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 99f514575f6..e547e3c8ee9 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -79,8 +79,7 @@ * the dev->feature bits if it wants. */ typedef void vq_callback_t(struct virtqueue *); -struct virtio_config_ops -{ +struct virtio_config_ops { void (*get)(struct virtio_device *vdev, unsigned offset, void *buf, unsigned len); void (*set)(struct virtio_device *vdev, unsigned offset, diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 9c543d6ac53..d8dd539c9f4 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -31,8 +31,7 @@ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ -struct virtio_net_config -{ +struct virtio_net_config { /* The config defining mac address (if VIRTIO_NET_F_MAC) */ __u8 mac[6]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ @@ -41,8 +40,7 @@ struct virtio_net_config /* This is the first element of the scatter-gather list. If you don't * specify GSO or CSUM features, you can simply ignore the header. */ -struct virtio_net_hdr -{ +struct virtio_net_hdr { #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset __u8 flags; #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index 693e0ec5afa..e4d144b132b 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -30,8 +30,7 @@ #define VIRTIO_RING_F_INDIRECT_DESC 28 /* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ -struct vring_desc -{ +struct vring_desc { /* Address (guest-physical). */ __u64 addr; /* Length. */ @@ -42,24 +41,21 @@ struct vring_desc __u16 next; }; -struct vring_avail -{ +struct vring_avail { __u16 flags; __u16 idx; __u16 ring[]; }; /* u32 is used here for ids for padding reasons. */ -struct vring_used_elem -{ +struct vring_used_elem { /* Index of start of used descriptor chain. */ __u32 id; /* Total length of the descriptor chain which was used (written to) */ __u32 len; }; -struct vring_used -{ +struct vring_used { __u16 flags; __u16 idx; struct vring_used_elem ring[]; -- cgit v1.2.3 From cbb4f2646d77b536ed2b1500ef6641083228ed8f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 31 Jul 2009 08:55:48 +0200 Subject: io context: fix ref counting Commit d9c7d394a8ebacb60097b192939ae9f15235225e ("block: prevent possible io_context->refcount overflow") mistakenly changed atomic_inc(&ioc->nr_tasks) to atomic_long_inc(&ioc->refcount). Signed-off-by: Li Zefan Acked-by: Nikanth Karthikesan Signed-off-by: Jens Axboe --- include/linux/iocontext.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index dd05434fa45..4da4a75c3f1 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -92,7 +92,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc) * a race). */ if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) { - atomic_long_inc(&ioc->refcount); + atomic_inc(&ioc->nr_tasks); return ioc; } -- cgit v1.2.3 From 6de7e356faf54aa75de5b624bbce28a5b776dfa8 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 18 Jun 2009 10:19:12 +0200 Subject: lib/scatterlist: add a flags to signalize mapping direction sg_miter_start() is currently unaware of the direction of the copy process (to or from the scatter list). It is important to know the direction because the page has to be flushed in case the data written is seen on a different mapping in user land on cache incoherent architectures. Signed-off-by: Sebastian Andrzej Siewior Acked-by: FUJITA Tomonori Acked-by: Tejun Heo Signed-off-by: Pierre Ossman --- include/linux/scatterlist.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index e5996984ddd..9aaf5bfdad1 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -242,6 +242,8 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents, */ #define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */ +#define SG_MITER_TO_SG (1 << 1) /* flush back to phys on unmap */ +#define SG_MITER_FROM_SG (1 << 2) /* nop */ struct sg_mapping_iter { /* the following three fields can be accessed directly */ -- cgit v1.2.3 From 4b2a108cd0d34880fe9d932258ca5b2ccebcd05e Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 22 Jun 2009 09:18:05 +0200 Subject: cb710: use SG_MITER_TO_SG/SG_MITER_FROM_SG MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit the code allready uses flush_kernel_dcache_page(). This patch updates the driver to the recent sg API changes which require that either SG_MITER_TO_SG or SG_MITER_FROM_SG is set. SG_MITER_TO_SG calls flush_kernel_dcache_page() in sg_mitter_stop() Signed-off-by: Sebastian Andrzej Siewior Acked-by: MichaÅ‚ MirosÅ‚aw Signed-off-by: Pierre Ossman --- include/linux/cb710.h | 29 +++-------------------------- 1 file changed, 3 insertions(+), 26 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cb710.h b/include/linux/cb710.h index 63bc9a4d292..8cc10411bab 100644 --- a/include/linux/cb710.h +++ b/include/linux/cb710.h @@ -140,29 +140,6 @@ void cb710_dump_regs(struct cb710_chip *chip, unsigned dump); #include #include -/** - * cb710_sg_miter_stop_writing - stop mapping iteration after writing - * @miter: sg mapping iter to be stopped - * - * Description: - * Stops mapping iterator @miter. @miter should have been started - * started using sg_miter_start(). A stopped iteration can be - * resumed by calling sg_miter_next() on it. This is useful when - * resources (kmap) need to be released during iteration. - * - * This is a convenience wrapper that will be optimized out for arches - * that don't need flush_kernel_dcache_page(). - * - * Context: - * IRQ disabled if the SG_MITER_ATOMIC is set. Don't care otherwise. - */ -static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter) -{ - if (miter->page) - flush_kernel_dcache_page(miter->page); - sg_miter_stop(miter); -} - /* * 32-bit PIO mapping sg iterator * @@ -171,12 +148,12 @@ static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter) * without DMA support). * * Best-case reading (transfer from device): - * sg_miter_start(); + * sg_miter_start(, SG_MITER_TO_SG); * cb710_sg_dwiter_write_from_io(); - * cb710_sg_miter_stop_writing(); + * sg_miter_stop(); * * Best-case writing (transfer to device): - * sg_miter_start(); + * sg_miter_start(, SG_MITER_FROM_SG); * cb710_sg_dwiter_read_to_io(); * sg_miter_stop(); */ -- cgit v1.2.3 From c7121843685de2bf7f3afd3ae1d6a146010bf1fc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 28 Jul 2009 14:09:55 -0700 Subject: clocksource: Save mult_orig in clocksource_disable() To fix the common case where ->enable() does not set up mult, make sure mult_orig is saved in mult on disable. Also add comments to explain why we do this. Signed-off-by: Magnus Damm Cc: johnstul@us.ibm.com Cc: lethal@linux-sh.org Cc: akpm@linux-foundation.org LKML-Reference: <20090618152432.10136.9932.sendpatchset@rx1.opensource.se> Signed-off-by: Thomas Gleixner --- include/linux/clocksource.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index c56457c8334..1219be4fb42 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -293,7 +293,12 @@ static inline int clocksource_enable(struct clocksource *cs) if (cs->enable) ret = cs->enable(cs); - /* save mult_orig on enable */ + /* + * The frequency may have changed while the clocksource + * was disabled. If so the code in ->enable() must update + * the mult value to reflect the new frequency. Make sure + * mult_orig follows this change. + */ cs->mult_orig = cs->mult; return ret; @@ -309,6 +314,13 @@ static inline int clocksource_enable(struct clocksource *cs) */ static inline void clocksource_disable(struct clocksource *cs) { + /* + * Save mult_orig in mult so clocksource_enable() can + * restore the value regardless if ->enable() updates + * the value of mult or not. + */ + cs->mult = cs->mult_orig; + if (cs->disable) cs->disable(cs); } -- cgit v1.2.3 From 7c958e32649e0c35801762878fb0b6da8c55a515 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 31 Jul 2009 11:49:11 -0400 Subject: block: Add a wrapper for setting minimum request size without a queue Introduce blk_limits_io_min() and make blk_queue_io_min() call it. Signed-off-by: Mike Snitzer Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e7cb5dbf6c2..69103e053c9 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -913,6 +913,7 @@ extern void blk_queue_logical_block_size(struct request_queue *, unsigned short) extern void blk_queue_physical_block_size(struct request_queue *, unsigned short); extern void blk_queue_alignment_offset(struct request_queue *q, unsigned int alignment); +extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min); extern void blk_queue_io_min(struct request_queue *q, unsigned int min); extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_default_limits(struct queue_limits *lim); -- cgit v1.2.3 From 9f498cc5be7e013d8d6e4c616980ed0ffc8680d2 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 23 Jul 2009 14:46:33 +0200 Subject: perf_counter: Full task tracing In order to be able to distinguish between no samples due to inactivity and no samples due to task ended, Arjan asked for PERF_EVENT_EXIT events. This is useful to the boot delay instrumentation (bootchart) app. This patch changes the PERF_EVENT_FORK to be emitted on every clone, and adds PERF_EVENT_EXIT to be emitted on task exit, after the task's counters have been closed. This task tracing is controlled through: attr.comm || attr.mmap and through the new attr.task field. Suggested-by: Arjan van de Ven Cc: Paul Mackerras Cc: Anton Blanchard Signed-off-by: Peter Zijlstra [ cleaned up perf_counter.h a bit ] Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index bd15d7a5f5c..e604e6ef72d 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -181,8 +181,9 @@ struct perf_counter_attr { freq : 1, /* use freq, not period */ inherit_stat : 1, /* per task counts */ enable_on_exec : 1, /* next exec enables */ + task : 1, /* trace fork/exit */ - __reserved_1 : 51; + __reserved_1 : 50; __u32 wakeup_events; /* wakeup every n events */ __u32 __reserved_2; @@ -308,6 +309,15 @@ enum perf_event_type { */ PERF_EVENT_COMM = 3, + /* + * struct { + * struct perf_event_header header; + * u32 pid, ppid; + * u32 tid, ptid; + * }; + */ + PERF_EVENT_EXIT = 4, + /* * struct { * struct perf_event_header header; @@ -323,6 +333,7 @@ enum perf_event_type { * struct { * struct perf_event_header header; * u32 pid, ppid; + * u32 tid, ptid; * }; */ PERF_EVENT_FORK = 7, -- cgit v1.2.3 From 7699ad35ed06044c4fc1be162553880f98658616 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Mon, 15 Jun 2009 01:10:18 -0400 Subject: mtd: let include/linux/mtd/partitions.h stand on its own When declaring static MTD partitions in board specific code, only including should suffice without gcc nagging us with: In file included from arch/arm/mach-kirkwood/sheevaplug-setup.c:14: include/linux/mtd/partitions.h:50: warning: 'struct mtd_info' declared inside parameter list include/linux/mtd/partitions.h:50: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/mtd/partitions.h:51: warning: 'struct mtd_info' declared inside parameter list include/linux/mtd/partitions.h:61: warning: 'struct mtd_info' declared inside parameter list include/linux/mtd/partitions.h:67: warning: 'struct mtd_info' declared inside parameter list Signed-off-by: Nicolas Pitre Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/partitions.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index af6dcb992bc..b70313d33ff 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -47,6 +47,8 @@ struct mtd_partition { #define MTDPART_SIZ_FULL (0) +struct mtd_info; + int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); int del_mtd_partitions(struct mtd_info *); -- cgit v1.2.3 From 6afc4fdb3e94ba60cd566cb878b60c6c01979277 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Tue, 28 Jul 2009 04:56:43 -0700 Subject: mtd: fix the conversion from dev to mtd_info The patch fixes a bug when converting dev to mtd_info by using the drvdata of the dev, the previous code used container_of(dev, struct mtd_info, dev), but won't work for the mtdXro devices as they created without being contained inside mtd_info structure. Signed-off-by: Saeed Bishara Signed-off-by: David Woodhouse --- include/linux/mtd/mtd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 5675b63a063..0f32a9b6ff5 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -251,7 +251,7 @@ struct mtd_info { static inline struct mtd_info *dev_to_mtd(struct device *dev) { - return dev ? container_of(dev, struct mtd_info, dev) : NULL; + return dev ? dev_get_drvdata(dev) : NULL; } static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) -- cgit v1.2.3 From 18eac1cc100fa2afd5f39085aae6b694e417734b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 3 Aug 2009 10:58:29 -0700 Subject: tty-ldisc: make refcount be atomic_t 'users' count This is pure preparation of changing the ldisc reference counting to be a true refcount that defines the lifetime of the ldisc. But this is a purely syntactic change for now to make the next steps easier. This patch should make no semantic changes at all. But I wanted to make the ldisc refcount be an atomic (I will be touching it without locks soon enough), and I wanted to rename it so that there isn't quite as much confusion between 'ldo->refcount' (ldisk operations refcount) and 'ld->refcount' (ldisc refcount itself) in the same file. So it's now an atomic 'ld->users' count. It still starts at zero, despite having a reference from 'tty->ldisc', but that will change once we turn it into a _real_ refcount. Signed-off-by: Linus Torvalds Tested-by: OGAWA Hirofumi Tested-by: Sergey Senozhatsky Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/tty_ldisc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 40f38d89677..0c4ee9b88f8 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -144,7 +144,7 @@ struct tty_ldisc_ops { struct tty_ldisc { struct tty_ldisc_ops *ops; - int refcount; + atomic_t users; }; #define TTY_LDISC_MAGIC 0x5403 -- cgit v1.2.3 From 5116d8f6b977970ebefc1932c0f313163a6ec91f Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 26 Jul 2009 17:10:01 +0300 Subject: KVM: fix ack not being delivered when msi present kvm_notify_acked_irq does not check irq type, so that it sometimes interprets msi vector as irq. As a result, ack notifiers are not called, which typially hangs the guest. The fix is to track and check irq type. Signed-off-by: Michael S. Tsirkin Signed-off-by: Avi Kivity --- include/linux/kvm_host.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 16713dc672e..3060bdc35ff 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -110,6 +110,7 @@ struct kvm_memory_slot { struct kvm_kernel_irq_routing_entry { u32 gsi; + u32 type; int (*set)(struct kvm_kernel_irq_routing_entry *e, struct kvm *kvm, int level); union { -- cgit v1.2.3 From af6af30c0fcd77e621638e53ef8b176bca8bd3b4 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 5 Aug 2009 20:41:04 +0200 Subject: ftrace: Fix perf-tracepoint OOPS Not all tracepoints are created equal, in specific the ftrace tracepoints are created with TRACE_EVENT_FORMAT() which does not generate the needed bits to tie them into perf counters. For those events, don't create the 'id' file and fail ->profile_enable when their ID is specified through other means. Reported-by: Chris Mason Signed-off-by: Peter Zijlstra Cc: Steven Rostedt LKML-Reference: <1249497664.5890.4.camel@laptop> [ v2: fix build error in the !CONFIG_EVENT_PROFILE case ] Signed-off-by: Ingo Molnar --- include/linux/ftrace_event.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 5c093ffc655..d7cd193c227 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -119,11 +119,9 @@ struct ftrace_event_call { void *filter; void *mod; -#ifdef CONFIG_EVENT_PROFILE - atomic_t profile_count; - int (*profile_enable)(struct ftrace_event_call *); - void (*profile_disable)(struct ftrace_event_call *); -#endif + atomic_t profile_count; + int (*profile_enable)(struct ftrace_event_call *); + void (*profile_disable)(struct ftrace_event_call *); }; #define MAX_FILTER_PRED 32 -- cgit v1.2.3 From d82f1c35348cebe2fb2d4a4d31ce0ab0769e3d93 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 5 Aug 2009 01:24:41 -0700 Subject: Input: matrix_keypad - make matrix keymap size dynamic Remove assumption on the shift and size of rows/columns form matrix_keypad driver. Signed-off-by: Eric Miao Signed-off-by: Dmitry Torokhov --- include/linux/input/matrix_keypad.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h index 7964516c695..15d5903af2d 100644 --- a/include/linux/input/matrix_keypad.h +++ b/include/linux/input/matrix_keypad.h @@ -15,12 +15,13 @@ #define KEY_COL(k) (((k) >> 16) & 0xff) #define KEY_VAL(k) ((k) & 0xffff) +#define MATRIX_SCAN_CODE(row, col, row_shift) (((row) << (row_shift)) + (col)) + /** * struct matrix_keymap_data - keymap for matrix keyboards * @keymap: pointer to array of uint32 values encoded with KEY() macro * representing keymap * @keymap_size: number of entries (initialized) in this keymap - * @max_keymap_size: maximum size of keymap supported by the device * * This structure is supposed to be used by platform code to supply * keymaps to drivers that implement matrix-like keypads/keyboards. @@ -28,14 +29,13 @@ struct matrix_keymap_data { const uint32_t *keymap; unsigned int keymap_size; - unsigned int max_keymap_size; }; /** * struct matrix_keypad_platform_data - platform-dependent keypad data * @keymap_data: pointer to &matrix_keymap_data - * @row_gpios: array of gpio numbers reporesenting rows - * @col_gpios: array of gpio numbers reporesenting colums + * @row_gpios: pointer to array of gpio numbers representing rows + * @col_gpios: pointer to array of gpio numbers reporesenting colums * @num_row_gpios: actual number of row gpios used by device * @num_col_gpios: actual number of col gpios used by device * @col_scan_delay_us: delay, measured in microseconds, that is @@ -48,8 +48,9 @@ struct matrix_keymap_data { struct matrix_keypad_platform_data { const struct matrix_keymap_data *keymap_data; - unsigned int row_gpios[MATRIX_MAX_ROWS]; - unsigned int col_gpios[MATRIX_MAX_COLS]; + const unsigned int *row_gpios; + const unsigned int *col_gpios; + unsigned int num_row_gpios; unsigned int num_col_gpios; -- cgit v1.2.3 From 54e346215e4fe2ca8c94c54e546cc61902060510 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 7 Aug 2009 14:38:25 -0300 Subject: vfs: fix inode_init_always calling convention Currently inode_init_always calls into ->destroy_inode if the additional initialization fails. That's not only counter-intuitive because inode_init_always did not allocate the inode structure, but in case of XFS it's actively harmful as ->destroy_inode might delete the inode from a radix-tree that has never been added. This in turn might end up deleting the inode for the same inum that has been instanciated by another process and cause lots of cause subtile problems. Also in the case of re-initializing a reclaimable inode in XFS it would free an inode we still want to keep alive. Signed-off-by: Christoph Hellwig Reviewed-by: Eric Sandeen --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index a36ffa5a77a..0c3b5e58a98 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2137,7 +2137,7 @@ extern loff_t default_llseek(struct file *file, loff_t offset, int origin); extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin); -extern struct inode * inode_init_always(struct super_block *, struct inode *); +extern int inode_init_always(struct super_block *, struct inode *); extern void inode_init_once(struct inode *); extern void inode_add_to_lists(struct super_block *, struct inode *); extern void iput(struct inode *); -- cgit v1.2.3 From 2e00c97e2c1d2ffc9e26252ca26b237678b0b772 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 7 Aug 2009 14:38:29 -0300 Subject: vfs: add __destroy_inode When we want to tear down an inode that lost the add to the cache race in XFS we must not call into ->destroy_inode because that would delete the inode that won the race from the inode cache radix tree. This patch provides the __destroy_inode helper needed to fix this, the actual fix will be in th next patch. As XFS was the only reason destroy_inode was exported we shift the export to the new __destroy_inode. Signed-off-by: Christoph Hellwig Reviewed-by: Eric Sandeen --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 0c3b5e58a98..67888a9e065 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2164,6 +2164,7 @@ extern void __iget(struct inode * inode); extern void iget_failed(struct inode *); extern void clear_inode(struct inode *); extern void destroy_inode(struct inode *); +extern void __destroy_inode(struct inode *); extern struct inode *new_inode(struct super_block *); extern int should_remove_suid(struct dentry *); extern int file_remove_suid(struct file *); -- cgit v1.2.3 From 4bfc44958e499af9a73f62201543b3a1f617cfeb Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 6 Aug 2009 15:07:33 -0700 Subject: mm: make set_mempolicy(MPOL_INTERLEAV) N_HIGH_MEMORY aware At first, init_task's mems_allowed is initialized as this. init_task->mems_allowed == node_state[N_POSSIBLE] And cpuset's top_cpuset mask is initialized as this top_cpuset->mems_allowed = node_state[N_HIGH_MEMORY] Before 2.6.29: policy's mems_allowed is initialized as this. 1. update tasks->mems_allowed by its cpuset->mems_allowed. 2. policy->mems_allowed = nodes_and(tasks->mems_allowed, user's mask) Updating task's mems_allowed in reference to top_cpuset's one. cpuset's mems_allowed is aware of N_HIGH_MEMORY, always. In 2.6.30: After commit 58568d2a8215cb6f55caf2332017d7bdff954e1c ("cpuset,mm: update tasks' mems_allowed in time"), policy's mems_allowed is initialized as this. 1. policy->mems_allowd = nodes_and(task->mems_allowed, user's mask) Here, if task is in top_cpuset, task->mems_allowed is not updated from init's one. Assume user excutes command as #numactrl --interleave=all ,.... policy->mems_allowd = nodes_and(N_POSSIBLE, ALL_SET_MASK) Then, policy's mems_allowd can includes a possible node, which has no pgdat. MPOL's INTERLEAVE just scans nodemask of task->mems_allowd and access this directly. NODE_DATA(nid)->zonelist even if NODE_DATA(nid)==NULL Then, what's we need is making policy->mems_allowed be aware of N_HIGH_MEMORY. This patch does that. But to do so, extra nodemask will be on statck. Because I know cpumask has a new interface of CPUMASK_ALLOC(), I added it to node. This patch stands on old behavior. But I feel this fix itself is just a Band-Aid. But to do fundametal fix, we have to take care of memory hotplug and it takes time. (task->mems_allowd should be N_HIGH_MEMORY, I think.) mpol_set_nodemask() should be aware of N_HIGH_MEMORY and policy's nodemask should be includes only online nodes. In old behavior, this is guaranteed by frequent reference to cpuset's code. Now, most of them are removed and mempolicy has to check it by itself. To do check, a few nodemask_t will be used for calculating nodemask. But, size of nodemask_t can be big and it's not good to allocate them on stack. Now, cpumask_t has CPUMASK_ALLOC/FREE an easy code for get scratch area. NODEMASK_ALLOC/FREE shoudl be there. [akpm@linux-foundation.org: cleanups & tweaks] Tested-by: KOSAKI Motohiro Signed-off-by: KAMEZAWA Hiroyuki Cc: Miao Xie Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Christoph Lameter Cc: Paul Menage Cc: Nick Piggin Cc: Yasunori Goto Cc: Pekka Enberg Cc: David Rientjes Cc: Lee Schermerhorn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/nodemask.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h index 829b94b156f..b359c4a9ec9 100644 --- a/include/linux/nodemask.h +++ b/include/linux/nodemask.h @@ -82,6 +82,12 @@ * to generate slightly worse code. So use a simple one-line #define * for node_isset(), instead of wrapping an inline inside a macro, the * way we do the other calls. + * + * NODEMASK_SCRATCH + * When doing above logical AND, OR, XOR, Remap operations the callers tend to + * need temporary nodemask_t's on the stack. But if NODES_SHIFT is large, + * nodemask_t's consume too much stack space. NODEMASK_SCRATCH is a helper + * for such situations. See below and CPUMASK_ALLOC also. */ #include @@ -473,4 +479,26 @@ static inline int num_node_state(enum node_states state) #define for_each_node(node) for_each_node_state(node, N_POSSIBLE) #define for_each_online_node(node) for_each_node_state(node, N_ONLINE) +/* + * For nodemask scrach area.(See CPUMASK_ALLOC() in cpumask.h) + */ + +#if NODES_SHIFT > 8 /* nodemask_t > 64 bytes */ +#define NODEMASK_ALLOC(x, m) struct x *m = kmalloc(sizeof(*m), GFP_KERNEL) +#define NODEMASK_FREE(m) kfree(m) +#else +#define NODEMASK_ALLOC(x, m) struct x _m, *m = &_m +#define NODEMASK_FREE(m) +#endif + +/* A example struture for using NODEMASK_ALLOC, used in mempolicy. */ +struct nodemask_scratch { + nodemask_t mask1; + nodemask_t mask2; +}; + +#define NODEMASK_SCRATCH(x) NODEMASK_ALLOC(nodemask_scratch, x) +#define NODEMASK_SCRATCH_FREE(x) NODEMASK_FREE(x) + + #endif /* __LINUX_NODEMASK_H */ -- cgit v1.2.3 From daeb6b6fbe27049f465c48a7d0ee5555c3b84064 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Thu, 6 Aug 2009 15:09:30 -0700 Subject: bzip2/lzma/gzip: fix comments describing decompressor API Fix and improve comments in decompress/generic.h that describe the decompressor API. Also remove an unused definition, and rename INBUF_LEN in lib/decompress_inflate.c to conform to bzip2/lzma naming. Signed-off-by: Phillip Lougher Cc: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/decompress/generic.h | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/decompress/generic.h b/include/linux/decompress/generic.h index 6dfb856327b..0c7111a55a1 100644 --- a/include/linux/decompress/generic.h +++ b/include/linux/decompress/generic.h @@ -1,31 +1,37 @@ #ifndef DECOMPRESS_GENERIC_H #define DECOMPRESS_GENERIC_H -/* Minimal chunksize to be read. - *Bzip2 prefers at least 4096 - *Lzma prefers 0x10000 */ -#define COMPR_IOBUF_SIZE 4096 - typedef int (*decompress_fn) (unsigned char *inbuf, int len, int(*fill)(void*, unsigned int), - int(*writebb)(void*, unsigned int), - unsigned char *output, + int(*flush)(void*, unsigned int), + unsigned char *outbuf, int *posp, void(*error)(char *x)); /* inbuf - input buffer *len - len of pre-read data in inbuf - *fill - function to fill inbuf if empty - *writebb - function to write out outbug + *fill - function to fill inbuf when empty + *flush - function to write out outbuf + *outbuf - output buffer *posp - if non-null, input position (number of bytes read) will be * returned here * - *If len != 0, the inbuf is initialized (with as much data), and fill - *should not be called - *If len = 0, the inbuf is allocated, but empty. Its size is IOBUF_SIZE - *fill should be called (repeatedly...) to read data, at most IOBUF_SIZE + *If len != 0, inbuf should contain all the necessary input data, and fill + *should be NULL + *If len = 0, inbuf can be NULL, in which case the decompressor will allocate + *the input buffer. If inbuf != NULL it must be at least XXX_IOBUF_SIZE bytes. + *fill will be called (repeatedly...) to read data, at most XXX_IOBUF_SIZE + *bytes should be read per call. Replace XXX with the appropriate decompressor + *name, i.e. LZMA_IOBUF_SIZE. + * + *If flush = NULL, outbuf must be large enough to buffer all the expected + *output. If flush != NULL, the output buffer will be allocated by the + *decompressor (outbuf = NULL), and the flush function will be called to + *flush the output buffer at the appropriate time (decompressor and stream + *dependent). */ + /* Utility routine to detect the decompression method */ decompress_fn decompress_method(const unsigned char *inbuf, int len, const char **name); -- cgit v1.2.3 From f413cdb80ce00ec1a4d0ab949b5d96c81cae7f75 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 7 Aug 2009 01:25:54 +0200 Subject: perf_counter: Fix/complete ftrace event records sampling This patch implements the kernel side support for ftrace event record sampling. A new counter sampling attribute is added: PERF_SAMPLE_TP_RECORD which requests ftrace events record sampling. In this case if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint fires, we emit the tracepoint binary record to the perfcounter event buffer, as a sample. Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf record: perf record -f -F 1 -a -e workqueue:workqueue_execution perf report -D 0x21e18 [0x48]: event: 9 . . ... raw event: size 72 bytes . 0000: 09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff ......H........ . 0010: 0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00 ........!...... . 0020: 2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e +...........eve . 0030: 74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00 ts/1........... . 0040: e0 b1 31 81 ff ff ff ff ....... . 0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33 The raw ftrace binary record starts at offset 0020. Translation: struct trace_entry { type = 0x2b = 43; flags = 1; preempt_count = 2; pid = 0xa = 10; tgid = 0xa = 10; } thread_comm = "events/1" thread_pid = 0xa = 10; func = 0xffffffff8131b1e0 = flush_to_ldisc() What will come next? - Userspace support ('perf trace'), 'flight data recorder' mode for perf trace, etc. - The unconditional copy from the profiling callback brings some costs however if someone wants no such sampling to occur, and needs to be fixed in the future. For that we need to have an instant access to the perf counter attribute. This is a matter of a flag to add in the struct ftrace_event. - Take care of the events recursivity! Don't ever try to record a lock event for example, it seems some locking is used in the profiling fast path and lead to a tracing recursivity. That will be fixed using raw spinlock or recursivity protection. - [...] - Profit! :-) Signed-off-by: Frederic Weisbecker Cc: Li Zefan Cc: Tom Zanussi Cc: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Steven Rostedt Cc: Paul Mackerras Cc: Pekka Enberg Cc: Gabriel Munteanu Cc: Lai Jiangshan Signed-off-by: Ingo Molnar --- include/linux/ftrace_event.h | 4 +++- include/linux/perf_counter.h | 9 ++++++++- 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index d7cd193c227..a81170de7f6 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -89,7 +89,9 @@ enum print_line_t { TRACE_TYPE_NO_CONSUME = 3 /* Handled but ask to not consume */ }; - +void tracing_generic_entry_update(struct trace_entry *entry, + unsigned long flags, + int pc); struct ring_buffer_event * trace_current_buffer_lock_reserve(int type, unsigned long len, unsigned long flags, int pc); diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index e604e6ef72d..a67dd5c5b6d 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -121,8 +121,9 @@ enum perf_counter_sample_format { PERF_SAMPLE_CPU = 1U << 7, PERF_SAMPLE_PERIOD = 1U << 8, PERF_SAMPLE_STREAM_ID = 1U << 9, + PERF_SAMPLE_TP_RECORD = 1U << 10, - PERF_SAMPLE_MAX = 1U << 10, /* non-ABI */ + PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ }; /* @@ -413,6 +414,11 @@ struct perf_callchain_entry { __u64 ip[PERF_MAX_STACK_DEPTH]; }; +struct perf_tracepoint_record { + int size; + char *record; +}; + struct task_struct; /** @@ -681,6 +687,7 @@ struct perf_sample_data { struct pt_regs *regs; u64 addr; u64 period; + void *private; }; extern int perf_counter_overflow(struct perf_counter *counter, int nmi, -- cgit v1.2.3 From 3a43ce68ae1758fa6a839386025ef45acb6baa22 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 8 Aug 2009 04:26:37 +0200 Subject: perf_counter: Fix tracepoint sampling to be part of generic sampling Based on Peter's comments, make tracepoint sampling generic just like all the other sampling bits are. This is a rename with no code changes: - PERF_SAMPLE_TP_RECORD to PERF_SAMPLE_RAW - struct perf_tracepoint_record to perf_raw_record We want the system in place that transport tracepoints raw samples events into the perf ring buffer to be generalized and usable by any type of counter. Reported-by; Peter Zijlstra Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Mike Galbraith Cc: Paul Mackerras LKML-Reference: <1249698400-5441-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index a67dd5c5b6d..2aabe43c1d0 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -121,7 +121,7 @@ enum perf_counter_sample_format { PERF_SAMPLE_CPU = 1U << 7, PERF_SAMPLE_PERIOD = 1U << 8, PERF_SAMPLE_STREAM_ID = 1U << 9, - PERF_SAMPLE_TP_RECORD = 1U << 10, + PERF_SAMPLE_RAW = 1U << 10, PERF_SAMPLE_MAX = 1U << 11, /* non-ABI */ }; @@ -414,9 +414,9 @@ struct perf_callchain_entry { __u64 ip[PERF_MAX_STACK_DEPTH]; }; -struct perf_tracepoint_record { - int size; - char *record; +struct perf_raw_record { + u32 size; + void *data; }; struct task_struct; @@ -687,7 +687,7 @@ struct perf_sample_data { struct pt_regs *regs; u64 addr; u64 period; - void *private; + struct perf_raw_record *raw; }; extern int perf_counter_overflow(struct perf_counter *counter, int nmi, -- cgit v1.2.3 From 62ab460cf5e450e1d207a98a9c6cf2e4a6a78fd1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:06:19 -0400 Subject: NFSv4: Add 'server capability' flags for NFSv4 recommended attributes If the NFSv4 server doesn't support a POSIX attribute, the generic NFS code needs to know that, so that it don't keep trying to poll for it. However, by the same count, if the NFSv4 server does support that attribute, then we should ensure that the inode metadata is appropriately labelled as being untrusted. For instance, if we don't know the correct value of the file's uid, we should certainly not be caching ACLs or ACCESS results. Signed-off-by: Trond Myklebust --- include/linux/nfs_fs_sb.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 19fe15d1204..320569eabe3 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -167,6 +167,15 @@ struct nfs_server { #define NFS_CAP_SYMLINKS (1U << 2) #define NFS_CAP_ACLS (1U << 3) #define NFS_CAP_ATOMIC_OPEN (1U << 4) +#define NFS_CAP_CHANGE_ATTR (1U << 5) +#define NFS_CAP_FILEID (1U << 6) +#define NFS_CAP_MODE (1U << 7) +#define NFS_CAP_NLINK (1U << 8) +#define NFS_CAP_OWNER (1U << 9) +#define NFS_CAP_OWNER_GROUP (1U << 10) +#define NFS_CAP_ATIME (1U << 11) +#define NFS_CAP_CTIME (1U << 12) +#define NFS_CAP_MTIME (1U << 13) /* maximum number of slots to use */ -- cgit v1.2.3 From 169026a61e6f436dfc12c9d10d95455c4e9f945b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 9 Aug 2009 15:09:32 -0400 Subject: SUNRPC: Clean up RPCBIND_MAXUADDRLEN definitions Clean up: Replace the single-integer definition of RPCBIND_MAXUADDRLEN with a definition that is based on previously defined address string sizes, and document the way this maximum is calculated. Also provide a separate macro for the size of the port number extension. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/msg_prot.h | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h index 70df4f1d884..77e62488339 100644 --- a/include/linux/sunrpc/msg_prot.h +++ b/include/linux/sunrpc/msg_prot.h @@ -189,7 +189,22 @@ typedef __be32 rpc_fraghdr; * Additionally, the two alternative forms specified in Section 2.2 of * [RFC2373] are also acceptable. */ -#define RPCBIND_MAXUADDRLEN (56u) + +#include + +/* Maximum size of the port number part of a universal address */ +#define RPCBIND_MAXUADDRPLEN sizeof(".255.255") + +/* Maximum size of an IPv4 universal address */ +#define RPCBIND_MAXUADDR4LEN \ + (INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN) + +/* Maximum size of an IPv6 universal address */ +#define RPCBIND_MAXUADDR6LEN \ + (INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN) + +/* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */ +#define RPCBIND_MAXUADDRLEN RPCBIND_MAXUADDR6LEN #endif /* __KERNEL__ */ #endif /* _LINUX_SUNRPC_MSGPROT_H_ */ -- cgit v1.2.3 From a02d692611348f11ee1bc37431a883c3ff2de23e Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 9 Aug 2009 15:09:34 -0400 Subject: SUNRPC: Provide functions for managing universal addresses Introduce a set of functions in the kernel's RPC implementation for converting between a socket address and either a standard presentation address string or an RPC universal address. The universal address functions will be used to encode and decode RPCB_FOO and NFSv4 SETCLIENTID arguments. The other functions are part of a previous promise to deliver shared functions that can be used by upper-layer protocols to display and manipulate IP addresses. The kernel's current address printf formatters were designed specifically for kernel to user-space APIs that require a particular string format for socket addresses, thus are somewhat limited for the purposes of sunrpc.ko. The formatter for IPv6 addresses, %pI6, does not support short-handing or scope IDs. Also, these printf formatters are unique per address family, so a separate formatter string is required for printing AF_INET and AF_INET6 addresses. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/clnt.h | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 37881f1a0bd..2636e8ad551 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -9,6 +9,10 @@ #ifndef _LINUX_SUNRPC_CLNT_H #define _LINUX_SUNRPC_CLNT_H +#include +#include +#include + #include #include #include @@ -151,5 +155,39 @@ void rpc_force_rebind(struct rpc_clnt *); size_t rpc_peeraddr(struct rpc_clnt *, struct sockaddr *, size_t); const char *rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t); +size_t rpc_ntop(const struct sockaddr *, char *, const size_t); +size_t rpc_pton(const char *, const size_t, + struct sockaddr *, const size_t); +char * rpc_sockaddr2uaddr(const struct sockaddr *); +size_t rpc_uaddr2sockaddr(const char *, const size_t, + struct sockaddr *, const size_t); + +static inline unsigned short rpc_get_port(const struct sockaddr *sap) +{ + switch (sap->sa_family) { + case AF_INET: + return ntohs(((struct sockaddr_in *)sap)->sin_port); + case AF_INET6: + return ntohs(((struct sockaddr_in6 *)sap)->sin6_port); + } + return 0; +} + +static inline void rpc_set_port(struct sockaddr *sap, + const unsigned short port) +{ + switch (sap->sa_family) { + case AF_INET: + ((struct sockaddr_in *)sap)->sin_port = htons(port); + break; + case AF_INET6: + ((struct sockaddr_in6 *)sap)->sin6_port = htons(port); + break; + } +} + +#define IPV6_SCOPE_DELIMITER '%' +#define IPV6_SCOPE_ID_LEN sizeof("%nnnnnnnnnn") + #endif /* __KERNEL__ */ #endif /* _LINUX_SUNRPC_CLNT_H */ -- cgit v1.2.3 From ba809130bc260fce04141aca01ef9e068d32af2a Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 9 Aug 2009 15:09:35 -0400 Subject: SUNRPC: Remove duplicate universal address generation RPC universal address generation is currently done in several places: rpcb_clnt.c, nfs4proc.c xprtsock.c, and xprtrdma.c. Remove the redundant cases that convert a socket address to a universal address. The nfs4proc.c case takes a pre-formatted presentation address string, not a socket address, so we'll leave that one. Because the new uaddr constructor uses the recently introduced rpc_ntop(), it now supports proper "::" shorthanding for IPv6 addresses. This allows the kernel to register properly formed universal addresses with the local rpcbind service, in _all_ cases. The kernel can now also send properly formed universal addresses in RPCB_GETADDR requests, and support link-local properly when encoding and decoding IPv6 addresses. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 1175d58efc2..65fad9534d9 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -41,7 +41,6 @@ enum rpc_display_format_t { RPC_DISPLAY_ALL, RPC_DISPLAY_HEX_ADDR, RPC_DISPLAY_HEX_PORT, - RPC_DISPLAY_UNIVERSAL_ADDR, RPC_DISPLAY_NETID, RPC_DISPLAY_MAX, }; -- cgit v1.2.3 From c740eff84bcfd63c0497ef880e80171931cb8222 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sun, 9 Aug 2009 15:09:46 -0400 Subject: SUNRPC: Kill RPC_DISPLAY_ALL At some point, I recall that rpc_pipe_fs used RPC_DISPLAY_ALL. Currently there are no uses of RPC_DISPLAY_ALL outside the transport modules themselves, so we can safely get rid of it. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xprt.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 65fad9534d9..c090df44257 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -38,7 +38,6 @@ enum rpc_display_format_t { RPC_DISPLAY_ADDR = 0, RPC_DISPLAY_PORT, RPC_DISPLAY_PROTO, - RPC_DISPLAY_ALL, RPC_DISPLAY_HEX_ADDR, RPC_DISPLAY_HEX_PORT, RPC_DISPLAY_NETID, -- cgit v1.2.3 From b693ba4a338da15db1db4b5ebaa36e4ab9781c82 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:15 -0400 Subject: SUNRPC: Constify rpc_pipe_ops... Signed-off-by: Trond Myklebust --- include/linux/sunrpc/rpc_pipe_fs.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index cea764c2359..91f5b13389c 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -32,8 +32,8 @@ struct rpc_inode { wait_queue_head_t waitq; #define RPC_PIPE_WAIT_FOR_OPEN 1 int flags; - struct rpc_pipe_ops *ops; struct delayed_work queue_timeout; + const struct rpc_pipe_ops *ops; }; static inline struct rpc_inode * @@ -46,7 +46,8 @@ extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *); extern int rpc_rmdir(struct dentry *); -extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, struct rpc_pipe_ops *, int flags); +extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, + const struct rpc_pipe_ops *, int flags); extern int rpc_unlink(struct dentry *); extern struct vfsmount *rpc_get_mount(void); extern void rpc_put_mount(void); -- cgit v1.2.3 From 458adb8ba9b26bfc66593866013adbb62a1a3d2e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:22 -0400 Subject: SUNRPC: Rename rpc_mkdir to rpc_create_client_dir() This reflects the fact that rpc_mkdir() as it stands today, can only create a RPC client type directory. Signed-off-by: Trond Myklebust --- include/linux/sunrpc/rpc_pipe_fs.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 91f5b13389c..8de0ac27649 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -44,8 +44,9 @@ RPC_I(struct inode *inode) extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); -extern struct dentry *rpc_mkdir(char *, struct rpc_clnt *); -extern int rpc_rmdir(struct dentry *); +struct rpc_clnt; +extern struct dentry *rpc_create_client_dir(const char *, struct rpc_clnt *); +extern int rpc_remove_client_dir(struct dentry *); extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, const struct rpc_pipe_ops *, int flags); extern int rpc_unlink(struct dentry *); -- cgit v1.2.3 From 7d217caca5d704e48aa5e59aba0b3ad4c7af4fd2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:24 -0400 Subject: SUNRPC: Replace rpc_client->cl_dentry and cl_mnt, with a cl_path Signed-off-by: Trond Myklebust --- include/linux/sunrpc/clnt.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 37881f1a0bd..38ad162330a 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -17,6 +17,7 @@ #include #include #include +#include struct rpc_inode; @@ -51,8 +52,7 @@ struct rpc_clnt { int cl_nodelen; /* nodename length */ char cl_nodename[UNX_MAXNODENAME]; char cl_pathname[30];/* Path in rpc_pipe_fs */ - struct vfsmount * cl_vfsmnt; - struct dentry * cl_dentry; /* inode */ + struct path cl_path; struct rpc_clnt * cl_parent; /* Points to parent of clones */ struct rpc_rtt cl_rtt_default; struct rpc_timeout cl_timeout_default; -- cgit v1.2.3 From 23ac6581702ac6d029643328a7e6ea3baf834c5e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:25 -0400 Subject: SUNRPC: clean up rpc_setup_pipedir() There is still a little wart or two there: Since we've already got a vfsmount, we might as well pass that in to rpc_create_client_dir. Another point is that if we open code __rpc_lookup_path() here, then we can avoid looking up the entire parent directory path over and over again: it doesn't change. Also get rid of rpc_clnt->cl_pathname, since it has no users... Signed-off-by: Trond Myklebust --- include/linux/sunrpc/clnt.h | 1 - include/linux/sunrpc/rpc_pipe_fs.h | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 38ad162330a..1848d44922e 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -51,7 +51,6 @@ struct rpc_clnt { int cl_nodelen; /* nodename length */ char cl_nodename[UNX_MAXNODENAME]; - char cl_pathname[30];/* Path in rpc_pipe_fs */ struct path cl_path; struct rpc_clnt * cl_parent; /* Points to parent of clones */ struct rpc_rtt cl_rtt_default; diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 8de0ac27649..88332ef1e95 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -45,7 +45,7 @@ RPC_I(struct inode *inode) extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); struct rpc_clnt; -extern struct dentry *rpc_create_client_dir(const char *, struct rpc_clnt *); +extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *); extern int rpc_remove_client_dir(struct dentry *); extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, const struct rpc_pipe_ops *, int flags); -- cgit v1.2.3 From 2da8ca26c6bfad685bfddf39728eac1c83906aa9 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:26 -0400 Subject: NFSD: Clean up the idmapper warning... What part of 'internal use' is so hard to understand? Signed-off-by: Trond Myklebust --- include/linux/sunrpc/cache.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 2d8b211b932..3d1fad22185 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -79,6 +79,8 @@ struct cache_detail { int (*cache_show)(struct seq_file *m, struct cache_detail *cd, struct cache_head *h); + void (*warn_no_listener)(struct cache_detail *cd, + int has_died); struct cache_head * (*alloc)(void); int (*match)(struct cache_head *orig, struct cache_head *new); @@ -102,7 +104,6 @@ struct cache_detail { atomic_t readers; /* how many time is /chennel open */ time_t last_close; /* if no readers, when did last close */ time_t last_warn; /* when we last warned about no readers */ - void (*warn_no_listener)(struct cache_detail *cd); }; -- cgit v1.2.3 From bc74b4f5e63a09fb78e245794a0de1e5a2716bbe Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:29 -0400 Subject: SUNRPC: Allow the cache_detail to specify alternative upcall mechanisms For events that are rare, such as referral DNS lookups, it makes limited sense to have a daemon constantly listening for upcalls on a channel. An alternative in those cases might simply be to run the app that fills the cache using call_usermodehelper_exec() and friends. The following patch allows the cache_detail to specify alternative upcall mechanisms for these particular cases. Signed-off-by: Trond Myklebust --- include/linux/sunrpc/cache.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 3d1fad22185..23ee25981a0 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -70,9 +70,9 @@ struct cache_detail { char *name; void (*cache_put)(struct kref *); - void (*cache_request)(struct cache_detail *cd, - struct cache_head *h, - char **bpp, int *blen); + int (*cache_upcall)(struct cache_detail *, + struct cache_head *); + int (*cache_parse)(struct cache_detail *, char *buf, int len); @@ -135,6 +135,13 @@ extern struct cache_head * sunrpc_cache_update(struct cache_detail *detail, struct cache_head *new, struct cache_head *old, int hash); +extern int +sunrpc_cache_pipe_upcall(struct cache_detail *detail, struct cache_head *h, + void (*cache_request)(struct cache_detail *, + struct cache_head *, + char **, + int *)); + extern void cache_clean_deferred(void *owner); -- cgit v1.2.3 From 173912a6add00f4715774dcecf9ee53274c5924c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:29 -0400 Subject: SUNRPC: Move procfs-specific stuff out of the generic sunrpc cache code Signed-off-by: Trond Myklebust --- include/linux/sunrpc/cache.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 23ee25981a0..8e5bf303665 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -59,6 +59,11 @@ struct cache_head { #define CACHE_NEW_EXPIRY 120 /* keep new things pending confirmation for 120 seconds */ +struct cache_detail_procfs { + struct proc_dir_entry *proc_ent; + struct proc_dir_entry *flush_ent, *channel_ent, *content_ent; +}; + struct cache_detail { struct module * owner; int hash_size; @@ -98,12 +103,14 @@ struct cache_detail { /* fields for communication over channel */ struct list_head queue; - struct proc_dir_entry *proc_ent; - struct proc_dir_entry *flush_ent, *channel_ent, *content_ent; atomic_t readers; /* how many time is /chennel open */ time_t last_close; /* if no readers, when did last close */ time_t last_warn; /* when we last warned about no readers */ + + union { + struct cache_detail_procfs procfs; + } u; }; -- cgit v1.2.3 From 8854e82d9accc80f43c0bc3ff06b5979ac858185 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 9 Aug 2009 15:14:30 -0400 Subject: SUNRPC: Add an rpc_pipefs front end for the sunrpc cache code Signed-off-by: Trond Myklebust --- include/linux/sunrpc/cache.h | 13 +++++++++++++ include/linux/sunrpc/rpc_pipe_fs.h | 8 ++++++++ 2 files changed, 21 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h index 8e5bf303665..6f52b4d7c44 100644 --- a/include/linux/sunrpc/cache.h +++ b/include/linux/sunrpc/cache.h @@ -64,6 +64,10 @@ struct cache_detail_procfs { struct proc_dir_entry *flush_ent, *channel_ent, *content_ent; }; +struct cache_detail_pipefs { + struct dentry *dir; +}; + struct cache_detail { struct module * owner; int hash_size; @@ -110,6 +114,7 @@ struct cache_detail { union { struct cache_detail_procfs procfs; + struct cache_detail_pipefs pipefs; } u; }; @@ -135,6 +140,10 @@ struct cache_deferred_req { }; +extern const struct file_operations cache_file_operations_pipefs; +extern const struct file_operations content_file_operations_pipefs; +extern const struct file_operations cache_flush_operations_pipefs; + extern struct cache_head * sunrpc_cache_lookup(struct cache_detail *detail, struct cache_head *key, int hash); @@ -186,6 +195,10 @@ extern void cache_purge(struct cache_detail *detail); extern int cache_register(struct cache_detail *cd); extern void cache_unregister(struct cache_detail *cd); +extern int sunrpc_cache_register_pipefs(struct dentry *parent, const char *, + mode_t, struct cache_detail *); +extern void sunrpc_cache_unregister_pipefs(struct cache_detail *); + extern void qword_add(char **bpp, int *lp, char *str); extern void qword_addhex(char **bpp, int *lp, char *buf, int blen); extern int qword_get(char **bpp, char *dest, int bufsize); diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 88332ef1e95..a92571a3455 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -47,6 +47,14 @@ extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); struct rpc_clnt; extern struct dentry *rpc_create_client_dir(struct dentry *, struct qstr *, struct rpc_clnt *); extern int rpc_remove_client_dir(struct dentry *); + +struct cache_detail; +extern struct dentry *rpc_create_cache_dir(struct dentry *, + struct qstr *, + mode_t umode, + struct cache_detail *); +extern void rpc_remove_cache_dir(struct dentry *); + extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, const struct rpc_pipe_ops *, int flags); extern int rpc_unlink(struct dentry *); -- cgit v1.2.3 From a044560c3a1f0ad75ce685c1ed7604820b9ed319 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 10 Aug 2009 11:16:52 +0200 Subject: perf_counter: Correct PERF_SAMPLE_RAW output PERF_SAMPLE_* output switches should unconditionally output the correct format, as they are the only way to unambiguously parse the PERF_EVENT_SAMPLE data. Signed-off-by: Peter Zijlstra Acked-by: Frederic Weisbecker Cc: Arnaldo Carvalho de Melo Cc: Mike Galbraith Cc: Paul Mackerras LKML-Reference: <1249896447.17467.74.camel@twins> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 2aabe43c1d0..a9d823a93fe 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -369,6 +369,8 @@ enum perf_event_type { * * { u64 nr, * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN + * { u32 size; + * char data[size];}&& PERF_SAMPLE_RAW * }; */ PERF_EVENT_SAMPLE = 9, -- cgit v1.2.3 From 2fc391112fb6f3424435a3aa2fda887497b5f807 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 10 Aug 2009 12:33:05 +0100 Subject: locking, sched: Give waitqueue spinlocks their own lockdep classes Give waitqueue spinlocks their own lockdep classes when they are initialised from init_waitqueue_head(). This means that struct wait_queue::func functions can operate other waitqueues. This is used by CacheFiles to catch the page from a backing fs being unlocked and to wake up another thread to take a copy of it. Signed-off-by: Peter Zijlstra Signed-off-by: David Howells Tested-by: Takashi Iwai Cc: linux-cachefs@redhat.com Cc: torvalds@osdl.org Cc: akpm@linux-foundation.org LKML-Reference: <20090810113305.17284.81508.stgit@warthog.procyon.org.uk> Signed-off-by: Ingo Molnar --- include/linux/wait.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/wait.h b/include/linux/wait.h index 6788e1a4d4c..cf3c2f5dba5 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -77,7 +77,14 @@ struct task_struct; #define __WAIT_BIT_KEY_INITIALIZER(word, bit) \ { .flags = word, .bit_nr = bit, } -extern void init_waitqueue_head(wait_queue_head_t *q); +extern void __init_waitqueue_head(wait_queue_head_t *q, struct lock_class_key *); + +#define init_waitqueue_head(q) \ + do { \ + static struct lock_class_key __key; \ + \ + __init_waitqueue_head((q), &__key); \ + } while (0) #ifdef CONFIG_LOCKDEP # define __WAIT_QUEUE_HEAD_INIT_ONSTACK(name) \ -- cgit v1.2.3 From 1ae88b2e446261c038f2c0c3150ffae142b227a2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 12 Aug 2009 09:12:30 -0400 Subject: NFS: Fix an O_DIRECT Oops... We can't call nfs_readdata_release()/nfs_writedata_release() without first initialising and referencing args.context. Doing so inside nfs_direct_read_schedule_segment()/nfs_direct_write_schedule_segment() causes an Oops. We should rather be calling nfs_readdata_free()/nfs_writedata_free() in those cases. Looking at the O_DIRECT code, the "struct nfs_direct_req" is already referencing the nfs_open_context for us. Since the readdata and writedata structures carry a reference to that, we can simplify things by getting rid of the extra nfs_open_context references, so that we can replace all instances of nfs_readdata_release()/nfs_writedata_release(). Reported-by: Catalin Marinas Signed-off-by: Trond Myklebust Tested-by: Catalin Marinas Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- include/linux/nfs_fs.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index fdffb413b19..f6b90240dd4 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -473,7 +473,6 @@ extern int nfs_writepages(struct address_space *, struct writeback_control *); extern int nfs_flush_incompatible(struct file *file, struct page *page); extern int nfs_updatepage(struct file *, struct page *, unsigned int, unsigned int); extern int nfs_writeback_done(struct rpc_task *, struct nfs_write_data *); -extern void nfs_writedata_release(void *); /* * Try to write back everything synchronously (but check the @@ -488,7 +487,6 @@ extern int nfs_wb_page_cancel(struct inode *inode, struct page* page); extern int nfs_commit_inode(struct inode *, int); extern struct nfs_write_data *nfs_commitdata_alloc(void); extern void nfs_commit_free(struct nfs_write_data *wdata); -extern void nfs_commitdata_release(void *wdata); #else static inline int nfs_commit_inode(struct inode *inode, int how) @@ -507,6 +505,7 @@ nfs_have_writebacks(struct inode *inode) * Allocate nfs_write_data structures */ extern struct nfs_write_data *nfs_writedata_alloc(unsigned int npages); +extern void nfs_writedata_free(struct nfs_write_data *); /* * linux/fs/nfs/read.c @@ -515,7 +514,6 @@ extern int nfs_readpage(struct file *, struct page *); extern int nfs_readpages(struct file *, struct address_space *, struct list_head *, unsigned); extern int nfs_readpage_result(struct rpc_task *, struct nfs_read_data *); -extern void nfs_readdata_release(void *data); extern int nfs_readpage_async(struct nfs_open_context *, struct inode *, struct page *); @@ -523,6 +521,7 @@ extern int nfs_readpage_async(struct nfs_open_context *, struct inode *, * Allocate nfs_read_data structures */ extern struct nfs_read_data *nfs_readdata_alloc(unsigned int npages); +extern void nfs_readdata_free(struct nfs_read_data *); /* * linux/fs/nfs3proc.c -- cgit v1.2.3 From 28402971d869e26271b25301011f667d3a5640c3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 13 Aug 2009 10:13:22 +0200 Subject: perf_counter: Provide hw_perf_counter_setup_online() APIs Provide weak aliases for hw_perf_counter_setup_online(). This is used by the BTS patches (for v2.6.32), but it interacts with fixes so propagate this upstream. (it has no effect as of yet) Also export perf_counter_output() to architecture code. Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index a9d823a93fe..2b36afe6ae0 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -694,6 +694,8 @@ struct perf_sample_data { extern int perf_counter_overflow(struct perf_counter *counter, int nmi, struct perf_sample_data *data); +extern void perf_counter_output(struct perf_counter *counter, int nmi, + struct perf_sample_data *data); /* * Return 1 for a software counter, 0 for a hardware counter -- cgit v1.2.3 From 3dab77fb1bf89664bb1c9544607159dcab6f7d57 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Aug 2009 11:47:53 +0200 Subject: perf: Rework/fix the whole read vs group stuff Replace PERF_SAMPLE_GROUP with PERF_SAMPLE_READ and introduce PERF_FORMAT_GROUP to deal with group reads in a more generic way. This allows you to get group reads out of read() as well. Signed-off-by: Peter Zijlstra Cc: Corey J Ashford Cc: Paul Mackerras Cc: stephane eranian LKML-Reference: <20090813103655.117411814@chello.nl> Signed-off-by: Ingo Molnar --- include/linux/perf_counter.h | 47 +++++++++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h index 2b36afe6ae0..b53f7006cc4 100644 --- a/include/linux/perf_counter.h +++ b/include/linux/perf_counter.h @@ -115,7 +115,7 @@ enum perf_counter_sample_format { PERF_SAMPLE_TID = 1U << 1, PERF_SAMPLE_TIME = 1U << 2, PERF_SAMPLE_ADDR = 1U << 3, - PERF_SAMPLE_GROUP = 1U << 4, + PERF_SAMPLE_READ = 1U << 4, PERF_SAMPLE_CALLCHAIN = 1U << 5, PERF_SAMPLE_ID = 1U << 6, PERF_SAMPLE_CPU = 1U << 7, @@ -127,16 +127,32 @@ enum perf_counter_sample_format { }; /* - * Bits that can be set in attr.read_format to request that - * reads on the counter should return the indicated quantities, - * in increasing order of bit value, after the counter value. + * The format of the data returned by read() on a perf counter fd, + * as specified by attr.read_format: + * + * struct read_format { + * { u64 value; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 id; } && PERF_FORMAT_ID + * } && !PERF_FORMAT_GROUP + * + * { u64 nr; + * { u64 time_enabled; } && PERF_FORMAT_ENABLED + * { u64 time_running; } && PERF_FORMAT_RUNNING + * { u64 value; + * { u64 id; } && PERF_FORMAT_ID + * } cntr[nr]; + * } && PERF_FORMAT_GROUP + * }; */ enum perf_counter_read_format { PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, PERF_FORMAT_ID = 1U << 2, + PERF_FORMAT_GROUP = 1U << 3, - PERF_FORMAT_MAX = 1U << 3, /* non-ABI */ + PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ }; #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ @@ -343,10 +359,8 @@ enum perf_event_type { * struct { * struct perf_event_header header; * u32 pid, tid; - * u64 value; - * { u64 time_enabled; } && PERF_FORMAT_ENABLED - * { u64 time_running; } && PERF_FORMAT_RUNNING - * { u64 parent_id; } && PERF_FORMAT_ID + * + * struct read_format values; * }; */ PERF_EVENT_READ = 8, @@ -364,11 +378,22 @@ enum perf_event_type { * { u32 cpu, res; } && PERF_SAMPLE_CPU * { u64 period; } && PERF_SAMPLE_PERIOD * - * { u64 nr; - * { u64 id, val; } cnt[nr]; } && PERF_SAMPLE_GROUP + * { struct read_format values; } && PERF_SAMPLE_READ * * { u64 nr, * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN + * + * # + * # The RAW record below is opaque data wrt the ABI + * # + * # That is, the ABI doesn't make any promises wrt to + * # the stability of its content, it may vary depending + * # on event, hardware, kernel version and phase of + * # the moon. + * # + * # In other words, PERF_SAMPLE_RAW contents are not an ABI. + * # + * * { u32 size; * char data[size];}&& PERF_SAMPLE_RAW * }; -- cgit v1.2.3 From 9f162d2a810b4db48f7b8d7e734d0932c81ec2a1 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Fri, 14 Aug 2009 17:18:44 +0300 Subject: sunrpc: hton -> cpu_to_be* htonl is already defined as cpu_to_be32. cpu_to_be64 has architecture specific optimized implementations. Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index b99c625fddf..f94bbdc75c4 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -117,9 +117,8 @@ static inline __be32 *xdr_encode_array(__be32 *p, const void *s, unsigned int le static inline __be32 * xdr_encode_hyper(__be32 *p, __u64 val) { - *p++ = htonl(val >> 32); - *p++ = htonl(val & 0xFFFFFFFF); - return p; + *(__be64 *)p = cpu_to_be64(val); + return p + 2; } static inline __be32 * -- cgit v1.2.3 From 98866b5abe1513cdacc011874ca045d40002eccd Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Fri, 14 Aug 2009 17:18:49 +0300 Subject: sunrpc: ntoh -> be*_to_cpu ntohl is already defined as be32_to_cpu. be64_to_cpu has architecture specific optimized implementations. Signed-off-by: Benny Halevy Signed-off-by: Trond Myklebust --- include/linux/sunrpc/xdr.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index f94bbdc75c4..7da466ba4b0 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -124,9 +124,8 @@ xdr_encode_hyper(__be32 *p, __u64 val) static inline __be32 * xdr_decode_hyper(__be32 *p, __u64 *valp) { - *valp = ((__u64) ntohl(*p++)) << 32; - *valp |= ntohl(*p++); - return p; + *valp = be64_to_cpup((__be64 *)p); + return p + 2; } /* -- cgit v1.2.3 From 4dceef96756b667360741712a8e37490f8458516 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 20 Aug 2009 17:08:39 -0400 Subject: nfs: fix compile error in rpc_pipefs.h This include is needed for the definition of delayed_work. Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/rpc_pipe_fs.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index a92571a3455..cf14db975da 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -3,6 +3,8 @@ #ifdef __KERNEL__ +#include + struct rpc_pipe_msg { struct list_head list; void *data; -- cgit v1.2.3