From 6f0312fd7e0e6f96fd847b0b2e1e0d2d2e8ef89d Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Wed, 12 Jul 2006 09:41:47 +0800 Subject: [PATCH] PCI: add PCI Express AER register definitions to pci_regs.h Add new defines of PCI-Express AER registers and their bits into file include/linux/pci_regs.h. Signed-off-by: Zhang Yanmin Signed-off-by: Greg Kroah-Hartman --- include/linux/pci_regs.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 6bce4a24036..96930cb5927 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -422,7 +422,23 @@ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ #define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ #define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +/* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 +/* Non-fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 +/* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 #define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +/* Multi ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 +/* ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 +/* Multi ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ #define PCI_ERR_ROOT_COR_SRC 52 #define PCI_ERR_ROOT_SRC 54 -- cgit v1.2.3 From ffadcc2ff42ecedf71ea67d9051ff028927aed08 Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Wed, 12 Jul 2006 08:59:00 -0700 Subject: [PATCH] PCI: PCIE power management quirk When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman --- include/linux/pci.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/pci.h b/include/linux/pci.h index 983fca251b2..8565b81d7fb 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -161,6 +161,7 @@ struct pci_dev { unsigned int is_enabled:1; /* pci_enable_device has been called */ unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ + unsigned int no_d1d2:1; /* only allow d0 or d3 */ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; -- cgit v1.2.3