From ff065ddd96c233d27322de493fa023357939c888 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 20 Oct 2005 20:53:39 +1000 Subject: powerpc: Merge various powermac-related header files. Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all of these moved from asm-ppc to asm-powerpc. In each case the asm-ppc64 version (if there was one) was just a single line including the asm-ppc version. Signed-off-by: Paul Mackerras --- include/asm-powerpc/dbdma.h | 102 ++++++++++ include/asm-powerpc/heathrow.h | 62 ++++++ include/asm-powerpc/keylargo.h | 248 ++++++++++++++++++++++++ include/asm-powerpc/macio.h | 140 ++++++++++++++ include/asm-powerpc/mediabay.h | 31 +++ include/asm-powerpc/ohare.h | 48 +++++ include/asm-powerpc/pmac_feature.h | 380 +++++++++++++++++++++++++++++++++++++ include/asm-powerpc/pmac_low_i2c.h | 43 +++++ include/asm-powerpc/smu.h | 379 ++++++++++++++++++++++++++++++++++++ include/asm-powerpc/uninorth.h | 229 ++++++++++++++++++++++ include/asm-ppc/dbdma.h | 102 ---------- include/asm-ppc/heathrow.h | 62 ------ include/asm-ppc/keylargo.h | 248 ------------------------ include/asm-ppc/macio.h | 140 -------------- include/asm-ppc/mediabay.h | 31 --- include/asm-ppc/ohare.h | 48 ----- include/asm-ppc/pmac_feature.h | 380 ------------------------------------- include/asm-ppc/pmac_low_i2c.h | 43 ----- include/asm-ppc/uninorth.h | 229 ---------------------- include/asm-ppc64/dbdma.h | 2 - include/asm-ppc64/keylargo.h | 2 - include/asm-ppc64/macio.h | 2 - include/asm-ppc64/pmac_feature.h | 2 - include/asm-ppc64/pmac_low_i2c.h | 2 - include/asm-ppc64/smu.h | 379 ------------------------------------ include/asm-ppc64/uninorth.h | 2 - 26 files changed, 1662 insertions(+), 1674 deletions(-) create mode 100644 include/asm-powerpc/dbdma.h create mode 100644 include/asm-powerpc/heathrow.h create mode 100644 include/asm-powerpc/keylargo.h create mode 100644 include/asm-powerpc/macio.h create mode 100644 include/asm-powerpc/mediabay.h create mode 100644 include/asm-powerpc/ohare.h create mode 100644 include/asm-powerpc/pmac_feature.h create mode 100644 include/asm-powerpc/pmac_low_i2c.h create mode 100644 include/asm-powerpc/smu.h create mode 100644 include/asm-powerpc/uninorth.h delete mode 100644 include/asm-ppc/dbdma.h delete mode 100644 include/asm-ppc/heathrow.h delete mode 100644 include/asm-ppc/keylargo.h delete mode 100644 include/asm-ppc/macio.h delete mode 100644 include/asm-ppc/mediabay.h delete mode 100644 include/asm-ppc/ohare.h delete mode 100644 include/asm-ppc/pmac_feature.h delete mode 100644 include/asm-ppc/pmac_low_i2c.h delete mode 100644 include/asm-ppc/uninorth.h delete mode 100644 include/asm-ppc64/dbdma.h delete mode 100644 include/asm-ppc64/keylargo.h delete mode 100644 include/asm-ppc64/macio.h delete mode 100644 include/asm-ppc64/pmac_feature.h delete mode 100644 include/asm-ppc64/pmac_low_i2c.h delete mode 100644 include/asm-ppc64/smu.h delete mode 100644 include/asm-ppc64/uninorth.h (limited to 'include') diff --git a/include/asm-powerpc/dbdma.h b/include/asm-powerpc/dbdma.h new file mode 100644 index 00000000000..8973565f95d --- /dev/null +++ b/include/asm-powerpc/dbdma.h @@ -0,0 +1,102 @@ +/* + * Definitions for using the Apple Descriptor-Based DMA controller + * in Power Macintosh computers. + * + * Copyright (C) 1996 Paul Mackerras. + */ + +#ifdef __KERNEL__ +#ifndef _ASM_DBDMA_H_ +#define _ASM_DBDMA_H_ +/* + * DBDMA control/status registers. All little-endian. + */ +struct dbdma_regs { + unsigned int control; /* lets you change bits in status */ + unsigned int status; /* DMA and device status bits (see below) */ + unsigned int cmdptr_hi; /* upper 32 bits of command address */ + unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ + unsigned int intr_sel; /* select interrupt condition bit */ + unsigned int br_sel; /* select branch condition bit */ + unsigned int wait_sel; /* select wait condition bit */ + unsigned int xfer_mode; + unsigned int data2ptr_hi; + unsigned int data2ptr; + unsigned int res1; + unsigned int address_hi; + unsigned int br_addr_hi; + unsigned int res2[3]; +}; + +/* Bits in control and status registers */ +#define RUN 0x8000 +#define PAUSE 0x4000 +#define FLUSH 0x2000 +#define WAKE 0x1000 +#define DEAD 0x0800 +#define ACTIVE 0x0400 +#define BT 0x0100 +#define DEVSTAT 0x00ff + +/* + * DBDMA command structure. These fields are all little-endian! + */ +struct dbdma_cmd { + unsigned short req_count; /* requested byte transfer count */ + unsigned short command; /* command word (has bit-fields) */ + unsigned int phy_addr; /* physical data address */ + unsigned int cmd_dep; /* command-dependent field */ + unsigned short res_count; /* residual count after completion */ + unsigned short xfer_status; /* transfer status */ +}; + +/* DBDMA command values in command field */ +#define OUTPUT_MORE 0 /* transfer memory data to stream */ +#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ +#define INPUT_MORE 0x2000 /* transfer stream data to memory */ +#define INPUT_LAST 0x3000 /* ditto, expect end marker */ +#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ +#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ +#define DBDMA_NOP 0x6000 /* do nothing */ +#define DBDMA_STOP 0x7000 /* suspend processing */ + +/* Key values in command field */ +#define KEY_STREAM0 0 /* usual data stream */ +#define KEY_STREAM1 0x100 /* control/status stream */ +#define KEY_STREAM2 0x200 /* device-dependent stream */ +#define KEY_STREAM3 0x300 /* device-dependent stream */ +#define KEY_REGS 0x500 /* device register space */ +#define KEY_SYSTEM 0x600 /* system memory-mapped space */ +#define KEY_DEVICE 0x700 /* device memory-mapped space */ + +/* Interrupt control values in command field */ +#define INTR_NEVER 0 /* don't interrupt */ +#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ +#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ +#define INTR_ALWAYS 0x30 /* always interrupt */ + +/* Branch control values in command field */ +#define BR_NEVER 0 /* don't branch */ +#define BR_IFSET 0x4 /* branch if condition bit is 1 */ +#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ +#define BR_ALWAYS 0xc /* always branch */ + +/* Wait control values in command field */ +#define WAIT_NEVER 0 /* don't wait */ +#define WAIT_IFSET 1 /* wait if condition bit is 1 */ +#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ +#define WAIT_ALWAYS 3 /* always wait */ + +/* Align an address for a DBDMA command structure */ +#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ + & -sizeof(struct dbdma_cmd)) + +/* Useful macros */ +#define DBDMA_DO_STOP(regs) do { \ + out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ + while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ + ; \ +} while(0) + +#endif /* _ASM_DBDMA_H_ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h new file mode 100644 index 00000000000..22ac179856b --- /dev/null +++ b/include/asm-powerpc/heathrow.h @@ -0,0 +1,62 @@ +/* + * heathrow.h: definitions for using the "Heathrow" I/O controller chip. + * + * Grabbed from Open Firmware definitions on a PowerBook G3 Series + * + * Copyright (C) 1997 Paul Mackerras. + */ + +/* Front light color on Yikes/B&W G3. 32 bits */ +#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ + +/* Brightness/contrast (gossamer iMac ?). 8 bits */ +#define HEATHROW_BRIGHTNESS_CNTL 0x32 +#define HEATHROW_CONTRAST_CNTL 0x33 + +/* offset from ohare base for feature control register */ +#define HEATHROW_MBCR 0x34 /* Media bay control */ +#define HEATHROW_FCR 0x38 /* Feature control */ +#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ + +/* + * Bits in feature control register. + * Bits postfixed with a _N are in inverse logic + */ +#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ +#define HRW_BAY_POWER_N 0x00000002 +#define HRW_BAY_PCI_ENABLE 0x00000004 +#define HRW_BAY_IDE_ENABLE 0x00000008 +#define HRW_BAY_FLOPPY_ENABLE 0x00000010 +#define HRW_IDE0_ENABLE 0x00000020 +#define HRW_IDE0_RESET_N 0x00000040 +#define HRW_BAY_DEV_MASK 0x0000001c +#define HRW_BAY_RESET_N 0x00000080 +#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ +#define HRW_SCC_ENABLE 0x00000200 +#define HRW_MESH_ENABLE 0x00000400 +#define HRW_SWIM_ENABLE 0x00000800 +#define HRW_SOUND_POWER_N 0x00001000 +#define HRW_SOUND_CLK_ENABLE 0x00002000 +#define HRW_SCCA_IO 0x00004000 +#define HRW_SCCB_IO 0x00008000 +#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ +#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ +#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ +#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ +#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ +#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ +#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ +#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ +#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ +#define HRW_RESET_SCC 0x02000000 +#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ +#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ +#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ +#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ + +/* We OR those features at boot on desktop G3s */ +#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) + +/* Looks like Heathrow has some sort of GPIOs as well... */ +#define HRW_GPIO_MODEM_RESET 0x6d + diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h new file mode 100644 index 00000000000..a669a3f0f5a --- /dev/null +++ b/include/asm-powerpc/keylargo.h @@ -0,0 +1,248 @@ +/* + * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. + * + */ + +/* "Pangea" chipset has keylargo device-id 0x25 while core99 + * has device-id 0x22. The rev. of the pangea one is 0, so we + * fake an artificial rev. in keylargo_rev by oring 0x100 + */ +#define KL_PANGEA_REV 0x100 + +/* offset from base for feature control registers */ +#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ +#define KEYLARGO_FCR0 0x38 +#define KEYLARGO_FCR1 0x3c +#define KEYLARGO_FCR2 0x40 +#define KEYLARGO_FCR3 0x44 +#define KEYLARGO_FCR4 0x48 +#define KEYLARGO_FCR5 0x4c /* Pangea only */ + +/* K2 aditional FCRs */ +#define K2_FCR6 0x34 +#define K2_FCR7 0x30 +#define K2_FCR8 0x2c +#define K2_FCR9 0x28 +#define K2_FCR10 0x24 + +/* GPIO registers */ +#define KEYLARGO_GPIO_LEVELS0 0x50 +#define KEYLARGO_GPIO_LEVELS1 0x54 +#define KEYLARGO_GPIO_EXTINT_0 0x58 +#define KEYLARGO_GPIO_EXTINT_CNT 18 +#define KEYLARGO_GPIO_0 0x6A +#define KEYLARGO_GPIO_CNT 17 +#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 +#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 +#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 +#define KEYLARGO_GPIO_INPUT_DATA 0x02 + +/* K2 does only extint GPIOs and does 51 of them */ +#define K2_GPIO_EXTINT_0 0x58 +#define K2_GPIO_EXTINT_CNT 51 + +/* Specific GPIO regs */ + +#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) +#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ + +#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) + +/* Hrm... this one is only to be used on Pismo. It seeem to also + * control the timebase enable on other machines. Still to be + * experimented... --BenH. + */ +#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) +#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) + +#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) + +#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) +#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 +#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 + +#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) +#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) +#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) +#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) + +#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) +#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA + +#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) + +#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) +#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) +#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) +#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) +#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) + +/* + * Bits in feature control register. Those bits different for K2 are + * listed separately + */ +#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ +#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 +#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ +#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ +#define KL_MBCR_MB0_DEV_MASK 0x00007800 +#define KL_MBCR_MB0_DEV_POWER 0x00000400 +#define KL_MBCR_MB0_DEV_RESET 0x00000200 +#define KL_MBCR_MB0_ENABLE 0x00000100 +#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ +#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 +#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ +#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ +#define KL_MBCR_MB1_DEV_MASK 0x78000000 +#define KL_MBCR_MB1_DEV_POWER 0x04000000 +#define KL_MBCR_MB1_DEV_RESET 0x02000000 +#define KL_MBCR_MB1_ENABLE 0x01000000 + +#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ +#define KL0_SCC_A_INTF_ENABLE 0x00000002 +#define KL0_SCC_SLOWPCLK 0x00000004 +#define KL0_SCC_RESET 0x00000008 +#define KL0_SCCA_ENABLE 0x00000010 +#define KL0_SCCB_ENABLE 0x00000020 +#define KL0_SCC_CELL_ENABLE 0x00000040 +#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ +#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ +#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ +#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ +#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ +#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ +#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ +#define KL0_USB0_PAD_SUSPEND0 0x00040000 +#define KL0_USB0_PAD_SUSPEND1 0x00080000 +#define KL0_USB0_CELL_ENABLE 0x00100000 +#define KL0_USB1_PAD_SUSPEND0 0x00400000 +#define KL0_USB1_PAD_SUSPEND1 0x00800000 +#define KL0_USB1_CELL_ENABLE 0x01000000 +#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ + +#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ + KL0_SCC_SLOWPCLK | \ + KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) + +#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ +#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ +#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ +#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ +#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ +#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ +#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ +#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ +#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ +#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ +#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ +#define KL1_I2S0_CELL_ENABLE 0x00000400 +#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define KL1_I2S0_ENABLE 0x00002000 +#define KL1_I2S1_CELL_ENABLE 0x00020000 +#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 +#define KL1_I2S1_ENABLE 0x00100000 +#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ +#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ +#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ +#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ +#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ +#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ + +#define KL2_IOBUS_ENABLE 0x00000002 +#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ +#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ +#define KL2_MPIC_ENABLE 0x00020000 +#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ +#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ +#define KL2_MEM_IS_BIG 0x04000000 +#define KL2_CARDSEL_16 0x08000000 + +#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ +#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ +#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ +#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ +#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ +#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ +#define KL3_CLK49_ENABLE 0x00000200 +#define KL3_CLK45_ENABLE 0x00000400 +#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ +#define KL3_TIMER_CLK18_ENABLE 0x00001000 +#define KL3_I2S1_CLK18_ENABLE 0x00002000 +#define KL3_I2S0_CLK18_ENABLE 0x00004000 +#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ +#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ +#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ +#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ + +/* Intrepid USB bus 2, port 0,1 */ +#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) + +/* Port 0,1 : bus 0, port 2,3 : bus 1 */ +#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) +#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) +#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) +#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) +#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) + +/* Pangea and Intrepid only */ +#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ +#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ +#define KL5_PWM_CLK32_EN 0x00000004 +#define KL5_CLK3_68_EN 0x00000010 +#define KL5_CLK32_EN 0x00000020 + + +/* K2 definitions */ +#define K2_FCR0_USB0_SWRESET 0x00200000 +#define K2_FCR0_USB1_SWRESET 0x02000000 +#define K2_FCR0_RING_PME_DISABLE 0x08000000 + +#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 +#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 +#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 +#define K2_FCR1_I2S0_RESET 0x00000800 +#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define K2_FCR1_I2S0_ENABLE 0x00002000 + +#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 +#define K2_FCR1_FW_CLK_ENABLE 0x00008000 +#define K2_FCR1_FW_RESET_N 0x00010000 +#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 +#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 +#define K2_FCR1_GMAC_RESET_N 0x01000000 +#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 +#define K2_FCR1_SATA_POWER_DOWN 0x04000000 +#define K2_FCR1_SATA_RESET_N 0x08000000 +#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 +#define K2_FCR1_UATA_RESET_N 0x40000000 +#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 + diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h new file mode 100644 index 00000000000..b553dd4b139 --- /dev/null +++ b/include/asm-powerpc/macio.h @@ -0,0 +1,140 @@ +#ifndef __MACIO_ASIC_H__ +#define __MACIO_ASIC_H__ + +#include + +extern struct bus_type macio_bus_type; + +/* MacIO device driver is defined later */ +struct macio_driver; +struct macio_chip; + +#define MACIO_DEV_COUNT_RESOURCES 8 +#define MACIO_DEV_COUNT_IRQS 8 + +/* + * the macio_bus structure is used to describe a "virtual" bus + * within a MacIO ASIC. It's typically provided by a macio_pci_asic + * PCI device, but could be provided differently as well (nubus + * machines using a fake OF tree). + * + * The pdev field can be NULL on non-PCI machines + */ +struct macio_bus +{ + struct macio_chip *chip; /* macio_chip (private use) */ + int index; /* macio chip index in system */ +#ifdef CONFIG_PCI + struct pci_dev *pdev; /* PCI device hosting this bus */ +#endif +}; + +/* + * the macio_dev structure is used to describe a device + * within an Apple MacIO ASIC. + */ +struct macio_dev +{ + struct macio_bus *bus; /* macio bus this device is on */ + struct macio_dev *media_bay; /* Device is part of a media bay */ + struct of_device ofdev; + int n_resources; + struct resource resource[MACIO_DEV_COUNT_RESOURCES]; + int n_interrupts; + struct resource interrupt[MACIO_DEV_COUNT_IRQS]; +}; +#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) +#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) + +extern struct macio_dev *macio_dev_get(struct macio_dev *dev); +extern void macio_dev_put(struct macio_dev *dev); + +/* + * Accessors to resources & interrupts and other device + * fields + */ + +static inline int macio_resource_count(struct macio_dev *dev) +{ + return dev->n_resources; +} + +static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].start; +} + +static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].end; +} + +static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) +{ + struct resource *res = &dev->resource[resource_no]; + if (res->start == 0 || res->end == 0 || res->end < res->start) + return 0; + return res->end - res->start + 1; +} + +extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); +extern void macio_release_resource(struct macio_dev *dev, int resource_no); +extern int macio_request_resources(struct macio_dev *dev, const char *name); +extern void macio_release_resources(struct macio_dev *dev); + +static inline int macio_irq_count(struct macio_dev *dev) +{ + return dev->n_interrupts; +} + +static inline int macio_irq(struct macio_dev *dev, int irq_no) +{ + return dev->interrupt[irq_no].start; +} + +static inline void macio_set_drvdata(struct macio_dev *dev, void *data) +{ + dev_set_drvdata(&dev->ofdev.dev, data); +} + +static inline void* macio_get_drvdata(struct macio_dev *dev) +{ + return dev_get_drvdata(&dev->ofdev.dev); +} + +static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) +{ + return mdev->ofdev.node; +} + +#ifdef CONFIG_PCI +static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) +{ + return mdev->bus->pdev; +} +#endif + +/* + * A driver for a mac-io chip based device + */ +struct macio_driver +{ + char *name; + struct of_device_id *match_table; + struct module *owner; + + int (*probe)(struct macio_dev* dev, const struct of_device_id *match); + int (*remove)(struct macio_dev* dev); + + int (*suspend)(struct macio_dev* dev, pm_message_t state); + int (*resume)(struct macio_dev* dev); + int (*shutdown)(struct macio_dev* dev); + + struct device_driver driver; +}; +#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) + +extern int macio_register_driver(struct macio_driver *); +extern void macio_unregister_driver(struct macio_driver *); + +#endif /* __MACIO_ASIC_H__ */ diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h new file mode 100644 index 00000000000..9daa3252d7b --- /dev/null +++ b/include/asm-powerpc/mediabay.h @@ -0,0 +1,31 @@ +/* + * mediabay.h: definitions for using the media bay + * on PowerBook 3400 and similar computers. + * + * Copyright (C) 1997 Paul Mackerras. + */ +#ifndef _PPC_MEDIABAY_H +#define _PPC_MEDIABAY_H + +#ifdef __KERNEL__ + +#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ +#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ +#define MB_SOUND 2 /* sound device ? */ +#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ +#define MB_PCI 5 /* media bay contains a PCI device */ +#define MB_POWER 6 /* media bay contains a Power device (???) */ +#define MB_NO 7 /* media bay contains nothing */ + +int check_media_bay(struct device_node *which_bay, int what); +int check_media_bay_by_base(unsigned long base, int what); + +/* Number of bays in the machine or 0 */ +extern int media_bay_count; + +/* called by pmac-ide.c to register IDE controller for media bay */ +extern int media_bay_set_ide_infos(struct device_node* which_bay, + unsigned long base, int irq, int index); + +#endif /* __KERNEL__ */ +#endif /* _PPC_MEDIABAY_H */ diff --git a/include/asm-powerpc/ohare.h b/include/asm-powerpc/ohare.h new file mode 100644 index 00000000000..023b5977223 --- /dev/null +++ b/include/asm-powerpc/ohare.h @@ -0,0 +1,48 @@ +/* + * ohare.h: definitions for using the "O'Hare" I/O controller chip. + * + * Copyright (C) 1997 Paul Mackerras. + * + * BenH: Changed to match those of heathrow (but not all of them). Please + * check if I didn't break anything (especially the media bay). + */ + +/* offset from ohare base for feature control register */ +#define OHARE_MBCR 0x34 +#define OHARE_FCR 0x38 + +/* + * Bits in feature control register. + * These were mostly derived by experiment on a powerbook 3400 + * and may differ for other machines. + */ +#define OH_SCC_RESET 1 +#define OH_BAY_POWER_N 2 /* a guess */ +#define OH_BAY_PCI_ENABLE 4 /* a guess */ +#define OH_BAY_IDE_ENABLE 8 +#define OH_BAY_FLOPPY_ENABLE 0x10 +#define OH_IDE0_ENABLE 0x20 +#define OH_IDE0_RESET_N 0x40 /* a guess */ +#define OH_BAY_DEV_MASK 0x1c +#define OH_BAY_RESET_N 0x80 +#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ +#define OH_SCC_ENABLE 0x200 +#define OH_MESH_ENABLE 0x400 +#define OH_FLOPPY_ENABLE 0x800 +#define OH_SCCA_IO 0x4000 +#define OH_SCCB_IO 0x8000 +#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ +#define OH_IDE1_RESET_N 0x800000 + +/* + * Bits to set in the feature control register on PowerBooks. + */ +#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ + OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) + +/* + * A magic value to put into the feature control register of the + * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. + * Contributed by Harry Eaton. + */ +#define STARMAX_FEATURES 0xbeff7a diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h new file mode 100644 index 00000000000..e9683bcff19 --- /dev/null +++ b/include/asm-powerpc/pmac_feature.h @@ -0,0 +1,380 @@ +/* + * Definition of platform feature hooks for PowerMacs + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Paul Mackerras & + * Ben. Herrenschmidt. + * + * + * Note: I removed media-bay details from the feature stuff, I believe it's + * not worth it, the media-bay driver can directly use the mac-io + * ASIC registers. + * + * Implementation note: Currently, none of these functions will block. + * However, they may internally protect themselves with a spinlock + * for way too long. Be prepared for at least some of these to block + * in the future. + * + * Unless specifically defined, the result code is assumed to be an + * error when negative, 0 is the default success result. Some functions + * may return additional positive result values. + * + * To keep implementation simple, all feature calls are assumed to have + * the prototype parameters (struct device_node* node, int value). + * When either is not used, pass 0. + */ + +#ifdef __KERNEL__ +#ifndef __PPC_ASM_PMAC_FEATURE_H +#define __PPC_ASM_PMAC_FEATURE_H + +#include +#include + +/* + * Known Mac motherboard models + * + * Please, report any error here to benh@kernel.crashing.org, thanks ! + * + * Note that I don't fully maintain this list for Core99 & MacRISC2 + * and I'm considering removing all NewWorld entries from it and + * entirely rely on the model string. + */ + +/* PowerSurge are the first generation of PCI Pmacs. This include + * all of the Grand-Central based machines. We currently don't + * differenciate most of them. + */ +#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ +#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ + +/* Here is the infamous serie of OHare based machines + */ +#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ +#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ +#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ +#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ +#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ +#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ + +/* Here are the Heathrow based machines + * FIXME: Differenciate wallstreet,mainstreet,wallstreetII + */ +#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ +#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ +#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ +#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ + +/* Here are newworld machines based on Paddington (heathrow derivative) + */ +#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ +#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ +#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ +#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ +#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ + +/* Core99 machines based on UniNorth 1.0 and 1.5 + * + * Note: A single entry here may cover several actual models according + * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most + * FireWire based iMacs, etc...). Those machines are too similar to be + * distinguished here, when they need to be differencied, use the + * device-tree "model" or "compatible" property. + */ +#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ +#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ +#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ +#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ +#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ +#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ +#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ +#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ +#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ +#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ +#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ +#define PMAC_TYPE_EMAC 0x50 /* eMac */ +#define PMAC_TYPE_UNKNOWN_CORE99 0x5f + +/* MacRisc2 with UniNorth 2.0 */ +#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ +#define PMAC_TYPE_WINDTUNNEL 0x81 + +/* MacRISC2 machines based on the Pangea chipset + */ +#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ +#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ +#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ +#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f + +/* MacRISC2 machines based on the Intrepid chipset + */ +#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ + +/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, + * but rather machine families + */ +#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ +#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ +#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ +#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ +#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ + +/* + * Motherboard flags + */ + +#define PMAC_MB_CAN_SLEEP 0x00000001 +#define PMAC_MB_HAS_FW_POWER 0x00000002 +#define PMAC_MB_OLD_CORE99 0x00000004 +#define PMAC_MB_MOBILE 0x00000008 +#define PMAC_MB_MAY_SLEEP 0x00000010 + +/* + * Feature calls supported on pmac + * + */ + +/* + * Use this inline wrapper + */ +struct device_node; + +static inline long pmac_call_feature(int selector, struct device_node* node, + long param, long value) +{ + if (!ppc_md.feature_call) + return -ENODEV; + return ppc_md.feature_call(selector, node, param, value); +} + +/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) + * enable/disable an SCC side. Pass the node corresponding to the + * channel side as a parameter. + * param is the type of port + * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled + * for use by xmon. + */ +#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) + #define PMAC_SCC_ASYNC 0 + #define PMAC_SCC_IRDA 1 + #define PMAC_SCC_I2S1 2 + #define PMAC_SCC_FLAG_XMON 0x00001000 + +/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) + * enable/disable the internal modem. + */ +#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) + +/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) + * enable/disable the swim3 (floppy) cell of a mac-io ASIC + */ +#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) + +/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) + * enable/disable the mesh (scsi) cell of a mac-io ASIC + */ +#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) + +/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) + * enable/disable an IDE port of a mac-io ASIC + * pass the busID parameter + */ +#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) + +/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) + * assert(1)/release(0) an IDE reset line (mac-io IDE only) + */ +#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) + +/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive + * it's reset line + */ +#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) + +/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This + * control the cell's clock. + */ +#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) + +/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) + * Perform a HW reset of the PHY connected to a gmac controller. + * Pass the gmac device node, not the PHY node. + */ +#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) + +/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) + * enable/disable the sound chip, whatever it is and provided it can + * acually be controlled + */ +#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) + +/* -- add various tweaks related to sound routing -- */ + +/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) + * enable/disable the airport card + */ +#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) + +/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) + * toggle the reset line of a CPU on an uninorth-based SMP machine + */ +#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) + +/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) + * enable/disable an USB cell, along with the power of the USB "pad" + * on keylargo based machines + */ +#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) + +/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) + * enable/disable the firewire cell of an uninorth ASIC. + */ +#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) + +/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) + * enable/disable the firewire cable power supply of the uninorth + * firewire cell + */ +#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) + +/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) + * set the sleep state of the motherboard. + * + * Pass -1 as value to query for sleep capability + * Pass 1 to set IOs to sleep + * Pass 0 to set IOs to wake + */ +#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) + +/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) + * + * returns some motherboard infos. + * selector: 0 - model id + * 1 - model flags (capabilities) + * 2 - model name (cast to const char *) + */ +#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) +#define PMAC_MB_INFO_MODEL 0 +#define PMAC_MB_INFO_FLAGS 1 +#define PMAC_MB_INFO_NAME 2 + +/* PMAC_FTR_READ_GPIO (NULL, int index, 0) + * + * read a GPIO from a mac-io controller of type KeyLargo or Pangea. + * the value returned is a byte (positive), or a negative error code + */ +#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) + +/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) + * + * write a GPIO of a mac-io controller of type KeyLargo or Pangea. + */ +#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) + +/* PMAC_FTR_ENABLE_MPIC + * + * Enable the MPIC cell + */ +#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) + +/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) + * + * Enable/disable the AACK delay on the northbridge for systems using DFS + */ +#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) + +/* PMAC_FTR_DEVICE_CAN_WAKE + * + * Used by video drivers to inform system that they can actually perform + * wakeup from sleep + */ +#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) + + +/* Don't use those directly, they are for the sake of pmac_setup.c */ +extern long pmac_do_feature_call(unsigned int selector, ...); +extern void pmac_feature_init(void); + +/* Video suspend tweak */ +extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); +extern void pmac_call_early_video_resume(void); + +#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x)) + +/* The AGP driver registers itself here */ +extern void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)); + +/* Those are meant to be used by video drivers to deal with AGP + * suspend resume properly + */ +extern void pmac_suspend_agp_for_card(struct pci_dev *dev); +extern void pmac_resume_agp_for_card(struct pci_dev *dev); + +/* Used by the via-pmu driver for suspend/resume + */ +extern void pmac_tweak_clock_spreading(int enable); + +/* + * The part below is for use by macio_asic.c only, do not rely + * on the data structures or constants below in a normal driver + * + */ + +#define MAX_MACIO_CHIPS 2 + +enum { + macio_unknown = 0, + macio_grand_central, + macio_ohare, + macio_ohareII, + macio_heathrow, + macio_gatwick, + macio_paddington, + macio_keylargo, + macio_pangea, + macio_intrepid, + macio_keylargo2, +}; + +struct macio_chip +{ + struct device_node *of_node; + int type; + const char *name; + int rev; + volatile u32 __iomem *base; + unsigned long flags; + + /* For use by macio_asic PCI driver */ + struct macio_bus lbus; +}; + +extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +#define MACIO_FLAG_SCCA_ON 0x00000001 +#define MACIO_FLAG_SCCB_ON 0x00000002 +#define MACIO_FLAG_SCC_LOCKED 0x00000004 +#define MACIO_FLAG_AIRPORT_ON 0x00000010 +#define MACIO_FLAG_FW_SUPPORTED 0x00000020 + +extern struct macio_chip* macio_find(struct device_node* child, int type); + +#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) +#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) + +#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) +#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) +#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) +#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) +#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) +#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) + +#endif /* __PPC_ASM_PMAC_FEATURE_H */ +#endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h new file mode 100644 index 00000000000..809a5963d5e --- /dev/null +++ b/include/asm-powerpc/pmac_low_i2c.h @@ -0,0 +1,43 @@ +/* + * include/asm-ppc/pmac_low_i2c.h + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#ifndef __PMAC_LOW_I2C_H__ +#define __PMAC_LOW_I2C_H__ + +/* i2c mode (based on the platform functions format) */ +enum { + pmac_low_i2c_mode_dumb = 1, + pmac_low_i2c_mode_std = 2, + pmac_low_i2c_mode_stdsub = 3, + pmac_low_i2c_mode_combined = 4, +}; + +/* RW bit in address */ +enum { + pmac_low_i2c_read = 0x01, + pmac_low_i2c_write = 0x00 +}; + +/* Init, called early during boot */ +extern void pmac_init_low_i2c(void); + +/* Locking functions exposed to i2c-keywest */ +int pmac_low_i2c_lock(struct device_node *np); +int pmac_low_i2c_unlock(struct device_node *np); + +/* Access functions for platform code */ +int pmac_low_i2c_open(struct device_node *np, int channel); +int pmac_low_i2c_close(struct device_node *np); +int pmac_low_i2c_setmode(struct device_node *np, int mode); +int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len); + + +#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h new file mode 100644 index 00000000000..dee8eefe47b --- /dev/null +++ b/include/asm-powerpc/smu.h @@ -0,0 +1,379 @@ +#ifndef _SMU_H +#define _SMU_H + +/* + * Definitions for talking to the SMU chip in newer G5 PowerMacs + */ + +#include +#include + +/* + * Known SMU commands + * + * Most of what is below comes from looking at the Open Firmware driver, + * though this is still incomplete and could use better documentation here + * or there... + */ + + +/* + * Partition info commands + * + * I do not know what those are for at this point + */ +#define SMU_CMD_PARTITION_COMMAND 0x3e + + +/* + * Fan control + * + * This is a "mux" for fan control commands, first byte is the + * "sub" command. + */ +#define SMU_CMD_FAN_COMMAND 0x4a + + +/* + * Battery access + * + * Same command number as the PMU, could it be same syntax ? + */ +#define SMU_CMD_BATTERY_COMMAND 0x6f +#define SMU_CMD_GET_BATTERY_INFO 0x00 + +/* + * Real time clock control + * + * This is a "mux", first data byte contains the "sub" command. + * The "RTC" part of the SMU controls the date, time, powerup + * timer, but also a PRAM + * + * Dates are in BCD format on 7 bytes: + * [sec] [min] [hour] [weekday] [month day] [month] [year] + * with month being 1 based and year minus 100 + */ +#define SMU_CMD_RTC_COMMAND 0x8e +#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */ +#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02 +#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */ +#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */ +#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */ +#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */ +#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */ +#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */ + + /* + * i2c commands + * + * To issue an i2c command, first is to send a parameter block to the + * the SMU. This is a command of type 0x9a with 9 bytes of header + * eventually followed by data for a write: + * + * 0: bus number (from device-tree usually, SMU has lots of busses !) + * 1: transfer type/format (see below) + * 2: device address. For combined and combined4 type transfers, this + * is the "write" version of the address (bit 0x01 cleared) + * 3: subaddress length (0..3) + * 4: subaddress byte 0 (or only byte for subaddress length 1) + * 5: subaddress byte 1 + * 6: subaddress byte 2 + * 7: combined address (device address for combined mode data phase) + * 8: data length + * + * The transfer types are the same good old Apple ones it seems, + * that is: + * - 0x00: Simple transfer + * - 0x01: Subaddress transfer (addr write + data tx, no restart) + * - 0x02: Combined transfer (addr write + restart + data tx) + * + * This is then followed by actual data for a write. + * + * At this point, the OF driver seems to have a limitation on transfer + * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know + * wether this is just an OF limit due to some temporary buffer size + * or if this is an SMU imposed limit. This driver has the same limitation + * for now as I use a 0x10 bytes temporary buffer as well + * + * Once that is completed, a response is expected from the SMU. This is + * obtained via a command of type 0x9a with a length of 1 byte containing + * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's + * though I can't tell yet if this is actually necessary. Once this command + * is complete, at this point, all I can tell is what OF does. OF tests + * byte 0 of the reply: + * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ? + * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0) + * - on write, < 0 -> failure (immediate exit) + * - else, OF just exists (without error, weird) + * + * So on read, there is this wait-for-busy thing when getting a 0xfc or + * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and + * doing the above again until either the retries expire or the result + * is no longer 0xfe or 0xfc + * + * The Darwin I2C driver is less subtle though. On any non-success status + * from the response command, it waits 5ms and tries again up to 20 times, + * it doesn't differenciate between fatal errors or "busy" status. + * + * This driver provides an asynchronous paramblock based i2c command + * interface to be used either directly by low level code or by a higher + * level driver interfacing to the linux i2c layer. The current + * implementation of this relies on working timers & timer interrupts + * though, so be careful of calling context for now. This may be "fixed" + * in the future by adding a polling facility. + */ +#define SMU_CMD_I2C_COMMAND 0x9a + /* transfer types */ +#define SMU_I2C_TRANSFER_SIMPLE 0x00 +#define SMU_I2C_TRANSFER_STDSUB 0x01 +#define SMU_I2C_TRANSFER_COMBINED 0x02 + +/* + * Power supply control + * + * The "sub" command is an ASCII string in the data, the + * data lenght is that of the string. + * + * The VSLEW command can be used to get or set the voltage slewing. + * - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of + * reply at data offset 6, 7 and 8. + * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is + * used to set the voltage slewing point. The SMU replies with "DONE" + * I yet have to figure out their exact meaning of those 3 bytes in + * both cases. + * + */ +#define SMU_CMD_POWER_COMMAND 0xaa +#define SMU_CMD_POWER_RESTART "RESTART" +#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" +#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" + +/* Misc commands + * + * This command seem to be a grab bag of various things + */ +#define SMU_CMD_MISC_df_COMMAND 0xdf +#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 /* i: 1 byte */ +#define SMU_CMD_MISC_df_NMI_OPTION 0x04 + +/* + * Version info commands + * + * I haven't quite tried to figure out how these work + */ +#define SMU_CMD_VERSION_COMMAND 0xea + + +/* + * Misc commands + * + * This command seem to be a grab bag of various things + */ +#define SMU_CMD_MISC_ee_COMMAND 0xee +#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 +#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */ +#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */ + + + +/* + * - Kernel side interface - + */ + +#ifdef __KERNEL__ + +/* + * Asynchronous SMU commands + * + * Fill up this structure and submit it via smu_queue_command(), + * and get notified by the optional done() callback, or because + * status becomes != 1 + */ + +struct smu_cmd; + +struct smu_cmd +{ + /* public */ + u8 cmd; /* command */ + int data_len; /* data len */ + int reply_len; /* reply len */ + void *data_buf; /* data buffer */ + void *reply_buf; /* reply buffer */ + int status; /* command status */ + void (*done)(struct smu_cmd *cmd, void *misc); + void *misc; + + /* private */ + struct list_head link; +}; + +/* + * Queues an SMU command, all fields have to be initialized + */ +extern int smu_queue_cmd(struct smu_cmd *cmd); + +/* + * Simple command wrapper. This structure embeds a small buffer + * to ease sending simple SMU commands from the stack + */ +struct smu_simple_cmd +{ + struct smu_cmd cmd; + u8 buffer[16]; +}; + +/* + * Queues a simple command. All fields will be initialized by that + * function + */ +extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, + unsigned int data_len, + void (*done)(struct smu_cmd *cmd, void *misc), + void *misc, + ...); + +/* + * Completion helper. Pass it to smu_queue_simple or as 'done' + * member to smu_queue_cmd, it will call complete() on the struct + * completion passed in the "misc" argument + */ +extern void smu_done_complete(struct smu_cmd *cmd, void *misc); + +/* + * Synchronous helpers. Will spin-wait for completion of a command + */ +extern void smu_spinwait_cmd(struct smu_cmd *cmd); + +static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd) +{ + smu_spinwait_cmd(&scmd->cmd); +} + +/* + * Poll routine to call if blocked with irqs off + */ +extern void smu_poll(void); + + +/* + * Init routine, presence check.... + */ +extern int smu_init(void); +extern int smu_present(void); +struct of_device; +extern struct of_device *smu_get_ofdev(void); + + +/* + * Common command wrappers + */ +extern void smu_shutdown(void); +extern void smu_restart(void); +struct rtc_time; +extern int smu_get_rtc_time(struct rtc_time *time, int spinwait); +extern int smu_set_rtc_time(struct rtc_time *time, int spinwait); + +/* + * SMU command buffer absolute address, exported by pmac_setup, + * this is allocated very early during boot. + */ +extern unsigned long smu_cmdbuf_abs; + + +/* + * Kenrel asynchronous i2c interface + */ + +/* SMU i2c header, exactly matches i2c header on wire */ +struct smu_i2c_param +{ + u8 bus; /* SMU bus ID (from device tree) */ + u8 type; /* i2c transfer type */ + u8 devaddr; /* device address (includes direction) */ + u8 sublen; /* subaddress length */ + u8 subaddr[3]; /* subaddress */ + u8 caddr; /* combined address, filled by SMU driver */ + u8 datalen; /* length of transfer */ + u8 data[7]; /* data */ +}; + +#define SMU_I2C_READ_MAX 0x0d +#define SMU_I2C_WRITE_MAX 0x05 + +struct smu_i2c_cmd +{ + /* public */ + struct smu_i2c_param info; + void (*done)(struct smu_i2c_cmd *cmd, void *misc); + void *misc; + int status; /* 1 = pending, 0 = ok, <0 = fail */ + + /* private */ + struct smu_cmd scmd; + int read; + int stage; + int retries; + u8 pdata[0x10]; + struct list_head link; +}; + +/* + * Call this to queue an i2c command to the SMU. You must fill info, + * including info.data for a write, done and misc. + * For now, no polling interface is provided so you have to use completion + * callback. + */ +extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); + + +#endif /* __KERNEL__ */ + +/* + * - Userland interface - + */ + +/* + * A given instance of the device can be configured for 2 different + * things at the moment: + * + * - sending SMU commands (default at open() time) + * - receiving SMU events (not yet implemented) + * + * Commands are written with write() of a command block. They can be + * "driver" commands (for example to switch to event reception mode) + * or real SMU commands. They are made of a header followed by command + * data if any. + * + * For SMU commands (not for driver commands), you can then read() back + * a reply. The reader will be blocked or not depending on how the device + * file is opened. poll() isn't implemented yet. The reply will consist + * of a header as well, followed by the reply data if any. You should + * always provide a buffer large enough for the maximum reply data, I + * recommand one page. + * + * It is illegal to send SMU commands through a file descriptor configured + * for events reception + * + */ +struct smu_user_cmd_hdr +{ + __u32 cmdtype; +#define SMU_CMDTYPE_SMU 0 /* SMU command */ +#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ + + __u8 cmd; /* SMU command byte */ + __u32 data_len; /* Lenght of data following */ +}; + +struct smu_user_reply_hdr +{ + __u32 status; /* Command status */ + __u32 reply_len; /* Lenght of data follwing */ +}; + +#endif /* _SMU_H */ diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h new file mode 100644 index 00000000000..f737732c386 --- /dev/null +++ b/include/asm-powerpc/uninorth.h @@ -0,0 +1,229 @@ +/* + * uninorth.h: definitions for using the "UniNorth" host bridge chip + * from Apple. This chip is used on "Core99" machines + * This also includes U2 used on more recent MacRISC2/3 + * machines and U3 (G5) + * + */ +#ifdef __KERNEL__ +#ifndef __ASM_UNINORTH_H__ +#define __ASM_UNINORTH_H__ + +/* + * Uni-N and U3 config space reg. definitions + * + * (Little endian) + */ + +/* Address ranges selection. This one should work with Bandit too */ +/* Not U3 */ +#define UNI_N_ADDR_SELECT 0x48 +#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ +#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ + +/* AGP registers */ +/* Not U3 */ +#define UNI_N_CFG_GART_BASE 0x8c +#define UNI_N_CFG_AGP_BASE 0x90 +#define UNI_N_CFG_GART_CTRL 0x94 +#define UNI_N_CFG_INTERNAL_STATUS 0x98 +#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 + +/* UNI_N_CFG_GART_CTRL bits definitions */ +#define UNI_N_CFG_GART_INVAL 0x00000001 +#define UNI_N_CFG_GART_ENABLE 0x00000100 +#define UNI_N_CFG_GART_2xRESET 0x00010000 +#define UNI_N_CFG_GART_DISSBADET 0x00020000 +/* The following seems to only be used only on U3 */ +#define U3_N_CFG_GART_SYNCMODE 0x00040000 +#define U3_N_CFG_GART_PERFRD 0x00080000 +#define U3_N_CFG_GART_B2BGNT 0x00200000 +#define U3_N_CFG_GART_FASTDDR 0x00400000 + +/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, + * revision 1.5 (x4 AGP) may need further changes. + * + * AGP_BASE register contains the base address of the AGP aperture on + * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, + * even if decoding of this address range is enabled in the address select + * register. Apparently, the only supported bases are 256Mb multiples + * (high 4 bits of that register). + * + * GART_BASE register appear to contain the physical address of the GART + * in system memory in the high address bits (page aligned), and the + * GART size in the low order bits (number of GART pages) + * + * The GART format itself is one 32bits word per physical memory page. + * This word contains, in little-endian format (!!!), the physical address + * of the page in the high bits, and what appears to be an "enable" bit + * in the LSB bit (0) that must be set to 1 when the entry is valid. + * + * Obviously, the GART is not cache coherent and so any change to it + * must be flushed to memory (or maybe just make the GART space non + * cachable). AGP memory itself doens't seem to be cache coherent neither. + * + * In order to invalidate the GART (which is probably necessary to inval + * the bridge internal TLBs), the following sequence has to be written, + * in order, to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * UNI_N_CFG_GART_ENABLE + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET + * UNI_N_CFG_GART_ENABLE + * + * As far as AGP "features" are concerned, it looks like fast write may + * not be supported but this has to be confirmed. + * + * Turning on AGP seem to require a double invalidate operation, one before + * setting the AGP command register, on after. + * + * Turning off AGP seems to require the following sequence: first wait + * for the AGP to be idle by reading the internal status register, then + * write in that order to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * 0 + * UNI_N_CFG_GART_2xRESET + * 0 + */ + +/* + * Uni-N memory mapped reg. definitions + * + * Those registers are Big-Endian !! + * + * Their meaning come from either Darwin and/or from experiments I made with + * the bootrom, I'm not sure about their exact meaning yet + * + */ + +/* Version of the UniNorth chip */ +#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ + +#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ +#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ +#define UNI_N_VERSION_150 0x0011 /* 1.5 */ +#define UNI_N_VERSION_200 0x0024 /* 2.0 */ +#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ +#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ +#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ + +/* This register is used to enable/disable various clocks */ +#define UNI_N_CLOCK_CNTL 0x0020 +#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ +#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ +#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ +#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ + +/* Power Management control */ +#define UNI_N_POWER_MGT 0x0030 +#define UNI_N_POWER_MGT_NORMAL 0x00 +#define UNI_N_POWER_MGT_IDLE2 0x01 +#define UNI_N_POWER_MGT_SLEEP 0x02 + +/* This register is configured by Darwin depending on the UniN + * revision + */ +#define UNI_N_ARB_CTRL 0x0040 +#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 +#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 +#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 +#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 + +/* This one _might_ return the CPU number of the CPU reading it; + * the bootROM decides whether to boot or to sleep/spinloop depending + * on this register beeing 0 or not + */ +#define UNI_N_CPU_NUMBER 0x0050 + +/* This register appear to be read by the bootROM to decide what + * to do on a non-recoverable reset (powerup or wakeup) + */ +#define UNI_N_HWINIT_STATE 0x0070 +#define UNI_N_HWINIT_STATE_SLEEPING 0x01 +#define UNI_N_HWINIT_STATE_RUNNING 0x02 +/* This last bit appear to be used by the bootROM to know the second + * CPU has started and will enter it's sleep loop with IP=0 + */ +#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 + +/* This register controls AACK delay, which is set when 2004 iBook/PowerBook + * is in low speed mode. + */ +#define UNI_N_AACK_DELAY 0x0100 +#define UNI_N_AACK_DELAY_ENABLE 0x00000001 + +/* Clock status for Intrepid */ +#define UNI_N_CLOCK_STOP_STATUS0 0x0150 +#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 +#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 +#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 +#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 +#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 +#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 +#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 +#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 +#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 +#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 +#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 +#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 +#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 +#define UNI_N_CLOCK_STOPPED_32 0x00000004 +#define UNI_N_CLOCK_STOPPED_45 0x00000002 +#define UNI_N_CLOCK_STOPPED_49 0x00000001 + +#define UNI_N_CLOCK_STOP_STATUS1 0x0160 +#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 +#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 +#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 +#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 +#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 +#define UNI_N_CLOCK_STOPPED_FW 0x00004000 +#define UNI_N_CLOCK_STOPPED_GB 0x00002000 +#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 +#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 +#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 +#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 +#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 +#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 +#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 +#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 +#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 +#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 +#define UNI_N_CLOCK_STOPPED_18 0x00000001 + +/* Intrepid registe to OF do-platform-clockspreading */ +#define UNI_N_CLOCK_SPREADING 0x190 + +/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ + + +/* + * U3 specific registers + */ + + +/* U3 Toggle */ +#define U3_TOGGLE_REG 0x00e0 +#define U3_PMC_START_STOP 0x0001 +#define U3_MPIC_RESET 0x0002 +#define U3_MPIC_OUTPUT_ENABLE 0x0004 + +/* U3 API PHY Config 1 */ +#define U3_API_PHY_CONFIG_1 0x23030 + +/* U3 HyperTransport registers */ +#define U3_HT_CONFIG_BASE 0x70000 +#define U3_HT_LINK_COMMAND 0x100 +#define U3_HT_LINK_CONFIG 0x110 +#define U3_HT_LINK_FREQ 0x120 + +#endif /* __ASM_UNINORTH_H__ */ +#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/dbdma.h b/include/asm-ppc/dbdma.h deleted file mode 100644 index 8973565f95d..00000000000 --- a/include/asm-ppc/dbdma.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Definitions for using the Apple Descriptor-Based DMA controller - * in Power Macintosh computers. - * - * Copyright (C) 1996 Paul Mackerras. - */ - -#ifdef __KERNEL__ -#ifndef _ASM_DBDMA_H_ -#define _ASM_DBDMA_H_ -/* - * DBDMA control/status registers. All little-endian. - */ -struct dbdma_regs { - unsigned int control; /* lets you change bits in status */ - unsigned int status; /* DMA and device status bits (see below) */ - unsigned int cmdptr_hi; /* upper 32 bits of command address */ - unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ - unsigned int intr_sel; /* select interrupt condition bit */ - unsigned int br_sel; /* select branch condition bit */ - unsigned int wait_sel; /* select wait condition bit */ - unsigned int xfer_mode; - unsigned int data2ptr_hi; - unsigned int data2ptr; - unsigned int res1; - unsigned int address_hi; - unsigned int br_addr_hi; - unsigned int res2[3]; -}; - -/* Bits in control and status registers */ -#define RUN 0x8000 -#define PAUSE 0x4000 -#define FLUSH 0x2000 -#define WAKE 0x1000 -#define DEAD 0x0800 -#define ACTIVE 0x0400 -#define BT 0x0100 -#define DEVSTAT 0x00ff - -/* - * DBDMA command structure. These fields are all little-endian! - */ -struct dbdma_cmd { - unsigned short req_count; /* requested byte transfer count */ - unsigned short command; /* command word (has bit-fields) */ - unsigned int phy_addr; /* physical data address */ - unsigned int cmd_dep; /* command-dependent field */ - unsigned short res_count; /* residual count after completion */ - unsigned short xfer_status; /* transfer status */ -}; - -/* DBDMA command values in command field */ -#define OUTPUT_MORE 0 /* transfer memory data to stream */ -#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ -#define INPUT_MORE 0x2000 /* transfer stream data to memory */ -#define INPUT_LAST 0x3000 /* ditto, expect end marker */ -#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ -#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ -#define DBDMA_NOP 0x6000 /* do nothing */ -#define DBDMA_STOP 0x7000 /* suspend processing */ - -/* Key values in command field */ -#define KEY_STREAM0 0 /* usual data stream */ -#define KEY_STREAM1 0x100 /* control/status stream */ -#define KEY_STREAM2 0x200 /* device-dependent stream */ -#define KEY_STREAM3 0x300 /* device-dependent stream */ -#define KEY_REGS 0x500 /* device register space */ -#define KEY_SYSTEM 0x600 /* system memory-mapped space */ -#define KEY_DEVICE 0x700 /* device memory-mapped space */ - -/* Interrupt control values in command field */ -#define INTR_NEVER 0 /* don't interrupt */ -#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ -#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ -#define INTR_ALWAYS 0x30 /* always interrupt */ - -/* Branch control values in command field */ -#define BR_NEVER 0 /* don't branch */ -#define BR_IFSET 0x4 /* branch if condition bit is 1 */ -#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ -#define BR_ALWAYS 0xc /* always branch */ - -/* Wait control values in command field */ -#define WAIT_NEVER 0 /* don't wait */ -#define WAIT_IFSET 1 /* wait if condition bit is 1 */ -#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ -#define WAIT_ALWAYS 3 /* always wait */ - -/* Align an address for a DBDMA command structure */ -#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ - & -sizeof(struct dbdma_cmd)) - -/* Useful macros */ -#define DBDMA_DO_STOP(regs) do { \ - out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ - while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ - ; \ -} while(0) - -#endif /* _ASM_DBDMA_H_ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/heathrow.h b/include/asm-ppc/heathrow.h deleted file mode 100644 index 22ac179856b..00000000000 --- a/include/asm-ppc/heathrow.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * heathrow.h: definitions for using the "Heathrow" I/O controller chip. - * - * Grabbed from Open Firmware definitions on a PowerBook G3 Series - * - * Copyright (C) 1997 Paul Mackerras. - */ - -/* Front light color on Yikes/B&W G3. 32 bits */ -#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ - -/* Brightness/contrast (gossamer iMac ?). 8 bits */ -#define HEATHROW_BRIGHTNESS_CNTL 0x32 -#define HEATHROW_CONTRAST_CNTL 0x33 - -/* offset from ohare base for feature control register */ -#define HEATHROW_MBCR 0x34 /* Media bay control */ -#define HEATHROW_FCR 0x38 /* Feature control */ -#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ - -/* - * Bits in feature control register. - * Bits postfixed with a _N are in inverse logic - */ -#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ -#define HRW_BAY_POWER_N 0x00000002 -#define HRW_BAY_PCI_ENABLE 0x00000004 -#define HRW_BAY_IDE_ENABLE 0x00000008 -#define HRW_BAY_FLOPPY_ENABLE 0x00000010 -#define HRW_IDE0_ENABLE 0x00000020 -#define HRW_IDE0_RESET_N 0x00000040 -#define HRW_BAY_DEV_MASK 0x0000001c -#define HRW_BAY_RESET_N 0x00000080 -#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ -#define HRW_SCC_ENABLE 0x00000200 -#define HRW_MESH_ENABLE 0x00000400 -#define HRW_SWIM_ENABLE 0x00000800 -#define HRW_SOUND_POWER_N 0x00001000 -#define HRW_SOUND_CLK_ENABLE 0x00002000 -#define HRW_SCCA_IO 0x00004000 -#define HRW_SCCB_IO 0x00008000 -#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ -#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ -#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ -#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ -#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ -#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ -#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ -#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ -#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ -#define HRW_RESET_SCC 0x02000000 -#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ -#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ -#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ -#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ - -/* We OR those features at boot on desktop G3s */ -#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) - -/* Looks like Heathrow has some sort of GPIOs as well... */ -#define HRW_GPIO_MODEM_RESET 0x6d - diff --git a/include/asm-ppc/keylargo.h b/include/asm-ppc/keylargo.h deleted file mode 100644 index a669a3f0f5a..00000000000 --- a/include/asm-ppc/keylargo.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. - * - */ - -/* "Pangea" chipset has keylargo device-id 0x25 while core99 - * has device-id 0x22. The rev. of the pangea one is 0, so we - * fake an artificial rev. in keylargo_rev by oring 0x100 - */ -#define KL_PANGEA_REV 0x100 - -/* offset from base for feature control registers */ -#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ -#define KEYLARGO_FCR0 0x38 -#define KEYLARGO_FCR1 0x3c -#define KEYLARGO_FCR2 0x40 -#define KEYLARGO_FCR3 0x44 -#define KEYLARGO_FCR4 0x48 -#define KEYLARGO_FCR5 0x4c /* Pangea only */ - -/* K2 aditional FCRs */ -#define K2_FCR6 0x34 -#define K2_FCR7 0x30 -#define K2_FCR8 0x2c -#define K2_FCR9 0x28 -#define K2_FCR10 0x24 - -/* GPIO registers */ -#define KEYLARGO_GPIO_LEVELS0 0x50 -#define KEYLARGO_GPIO_LEVELS1 0x54 -#define KEYLARGO_GPIO_EXTINT_0 0x58 -#define KEYLARGO_GPIO_EXTINT_CNT 18 -#define KEYLARGO_GPIO_0 0x6A -#define KEYLARGO_GPIO_CNT 17 -#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 -#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 -#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 -#define KEYLARGO_GPIO_INPUT_DATA 0x02 - -/* K2 does only extint GPIOs and does 51 of them */ -#define K2_GPIO_EXTINT_0 0x58 -#define K2_GPIO_EXTINT_CNT 51 - -/* Specific GPIO regs */ - -#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) -#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ - -#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) - -/* Hrm... this one is only to be used on Pismo. It seeem to also - * control the timebase enable on other machines. Still to be - * experimented... --BenH. - */ -#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) -#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) - -#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) - -#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) -#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 -#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 - -#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) -#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) -#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) -#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) - -#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) -#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA - -#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) - -#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) -#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) -#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) -#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) -#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) - -/* - * Bits in feature control register. Those bits different for K2 are - * listed separately - */ -#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ -#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 -#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ -#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ -#define KL_MBCR_MB0_DEV_MASK 0x00007800 -#define KL_MBCR_MB0_DEV_POWER 0x00000400 -#define KL_MBCR_MB0_DEV_RESET 0x00000200 -#define KL_MBCR_MB0_ENABLE 0x00000100 -#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ -#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 -#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ -#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ -#define KL_MBCR_MB1_DEV_MASK 0x78000000 -#define KL_MBCR_MB1_DEV_POWER 0x04000000 -#define KL_MBCR_MB1_DEV_RESET 0x02000000 -#define KL_MBCR_MB1_ENABLE 0x01000000 - -#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ -#define KL0_SCC_A_INTF_ENABLE 0x00000002 -#define KL0_SCC_SLOWPCLK 0x00000004 -#define KL0_SCC_RESET 0x00000008 -#define KL0_SCCA_ENABLE 0x00000010 -#define KL0_SCCB_ENABLE 0x00000020 -#define KL0_SCC_CELL_ENABLE 0x00000040 -#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ -#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ -#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ -#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ -#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ -#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ -#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ -#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ -#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ -#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ -#define KL0_USB0_PAD_SUSPEND0 0x00040000 -#define KL0_USB0_PAD_SUSPEND1 0x00080000 -#define KL0_USB0_CELL_ENABLE 0x00100000 -#define KL0_USB1_PAD_SUSPEND0 0x00400000 -#define KL0_USB1_PAD_SUSPEND1 0x00800000 -#define KL0_USB1_CELL_ENABLE 0x01000000 -#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ - -#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ - KL0_SCC_SLOWPCLK | \ - KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) - -#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ -#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ -#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ -#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ -#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ -#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ -#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ -#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ -#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ -#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ -#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ -#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ -#define KL1_I2S0_CELL_ENABLE 0x00000400 -#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define KL1_I2S0_ENABLE 0x00002000 -#define KL1_I2S1_CELL_ENABLE 0x00020000 -#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 -#define KL1_I2S1_ENABLE 0x00100000 -#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ -#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ -#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ -#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ -#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ -#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ - -#define KL2_IOBUS_ENABLE 0x00000002 -#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ -#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ -#define KL2_MPIC_ENABLE 0x00020000 -#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ -#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ -#define KL2_MEM_IS_BIG 0x04000000 -#define KL2_CARDSEL_16 0x08000000 - -#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ -#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ -#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ -#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ -#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ -#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ -#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ -#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ -#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ -#define KL3_CLK49_ENABLE 0x00000200 -#define KL3_CLK45_ENABLE 0x00000400 -#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ -#define KL3_TIMER_CLK18_ENABLE 0x00001000 -#define KL3_I2S1_CLK18_ENABLE 0x00002000 -#define KL3_I2S0_CLK18_ENABLE 0x00004000 -#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ -#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ -#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ -#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ - -/* Intrepid USB bus 2, port 0,1 */ -#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) -#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) -#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) -#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) - -/* Port 0,1 : bus 0, port 2,3 : bus 1 */ -#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) -#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) -#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) -#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) -#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) -#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) - -/* Pangea and Intrepid only */ -#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ -#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ -#define KL5_PWM_CLK32_EN 0x00000004 -#define KL5_CLK3_68_EN 0x00000010 -#define KL5_CLK32_EN 0x00000020 - - -/* K2 definitions */ -#define K2_FCR0_USB0_SWRESET 0x00200000 -#define K2_FCR0_USB1_SWRESET 0x02000000 -#define K2_FCR0_RING_PME_DISABLE 0x08000000 - -#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 -#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 -#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 -#define K2_FCR1_I2S0_RESET 0x00000800 -#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 -#define K2_FCR1_I2S0_ENABLE 0x00002000 - -#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 -#define K2_FCR1_FW_CLK_ENABLE 0x00008000 -#define K2_FCR1_FW_RESET_N 0x00010000 -#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 -#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 -#define K2_FCR1_GMAC_RESET_N 0x01000000 -#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 -#define K2_FCR1_SATA_POWER_DOWN 0x04000000 -#define K2_FCR1_SATA_RESET_N 0x08000000 -#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 -#define K2_FCR1_UATA_RESET_N 0x40000000 -#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 - diff --git a/include/asm-ppc/macio.h b/include/asm-ppc/macio.h deleted file mode 100644 index b553dd4b139..00000000000 --- a/include/asm-ppc/macio.h +++ /dev/null @@ -1,140 +0,0 @@ -#ifndef __MACIO_ASIC_H__ -#define __MACIO_ASIC_H__ - -#include - -extern struct bus_type macio_bus_type; - -/* MacIO device driver is defined later */ -struct macio_driver; -struct macio_chip; - -#define MACIO_DEV_COUNT_RESOURCES 8 -#define MACIO_DEV_COUNT_IRQS 8 - -/* - * the macio_bus structure is used to describe a "virtual" bus - * within a MacIO ASIC. It's typically provided by a macio_pci_asic - * PCI device, but could be provided differently as well (nubus - * machines using a fake OF tree). - * - * The pdev field can be NULL on non-PCI machines - */ -struct macio_bus -{ - struct macio_chip *chip; /* macio_chip (private use) */ - int index; /* macio chip index in system */ -#ifdef CONFIG_PCI - struct pci_dev *pdev; /* PCI device hosting this bus */ -#endif -}; - -/* - * the macio_dev structure is used to describe a device - * within an Apple MacIO ASIC. - */ -struct macio_dev -{ - struct macio_bus *bus; /* macio bus this device is on */ - struct macio_dev *media_bay; /* Device is part of a media bay */ - struct of_device ofdev; - int n_resources; - struct resource resource[MACIO_DEV_COUNT_RESOURCES]; - int n_interrupts; - struct resource interrupt[MACIO_DEV_COUNT_IRQS]; -}; -#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) -#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) - -extern struct macio_dev *macio_dev_get(struct macio_dev *dev); -extern void macio_dev_put(struct macio_dev *dev); - -/* - * Accessors to resources & interrupts and other device - * fields - */ - -static inline int macio_resource_count(struct macio_dev *dev) -{ - return dev->n_resources; -} - -static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].start; -} - -static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) -{ - return dev->resource[resource_no].end; -} - -static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) -{ - struct resource *res = &dev->resource[resource_no]; - if (res->start == 0 || res->end == 0 || res->end < res->start) - return 0; - return res->end - res->start + 1; -} - -extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); -extern void macio_release_resource(struct macio_dev *dev, int resource_no); -extern int macio_request_resources(struct macio_dev *dev, const char *name); -extern void macio_release_resources(struct macio_dev *dev); - -static inline int macio_irq_count(struct macio_dev *dev) -{ - return dev->n_interrupts; -} - -static inline int macio_irq(struct macio_dev *dev, int irq_no) -{ - return dev->interrupt[irq_no].start; -} - -static inline void macio_set_drvdata(struct macio_dev *dev, void *data) -{ - dev_set_drvdata(&dev->ofdev.dev, data); -} - -static inline void* macio_get_drvdata(struct macio_dev *dev) -{ - return dev_get_drvdata(&dev->ofdev.dev); -} - -static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) -{ - return mdev->ofdev.node; -} - -#ifdef CONFIG_PCI -static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) -{ - return mdev->bus->pdev; -} -#endif - -/* - * A driver for a mac-io chip based device - */ -struct macio_driver -{ - char *name; - struct of_device_id *match_table; - struct module *owner; - - int (*probe)(struct macio_dev* dev, const struct of_device_id *match); - int (*remove)(struct macio_dev* dev); - - int (*suspend)(struct macio_dev* dev, pm_message_t state); - int (*resume)(struct macio_dev* dev); - int (*shutdown)(struct macio_dev* dev); - - struct device_driver driver; -}; -#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) - -extern int macio_register_driver(struct macio_driver *); -extern void macio_unregister_driver(struct macio_driver *); - -#endif /* __MACIO_ASIC_H__ */ diff --git a/include/asm-ppc/mediabay.h b/include/asm-ppc/mediabay.h deleted file mode 100644 index 9daa3252d7b..00000000000 --- a/include/asm-ppc/mediabay.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * mediabay.h: definitions for using the media bay - * on PowerBook 3400 and similar computers. - * - * Copyright (C) 1997 Paul Mackerras. - */ -#ifndef _PPC_MEDIABAY_H -#define _PPC_MEDIABAY_H - -#ifdef __KERNEL__ - -#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ -#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ -#define MB_SOUND 2 /* sound device ? */ -#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ -#define MB_PCI 5 /* media bay contains a PCI device */ -#define MB_POWER 6 /* media bay contains a Power device (???) */ -#define MB_NO 7 /* media bay contains nothing */ - -int check_media_bay(struct device_node *which_bay, int what); -int check_media_bay_by_base(unsigned long base, int what); - -/* Number of bays in the machine or 0 */ -extern int media_bay_count; - -/* called by pmac-ide.c to register IDE controller for media bay */ -extern int media_bay_set_ide_infos(struct device_node* which_bay, - unsigned long base, int irq, int index); - -#endif /* __KERNEL__ */ -#endif /* _PPC_MEDIABAY_H */ diff --git a/include/asm-ppc/ohare.h b/include/asm-ppc/ohare.h deleted file mode 100644 index 023b5977223..00000000000 --- a/include/asm-ppc/ohare.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * ohare.h: definitions for using the "O'Hare" I/O controller chip. - * - * Copyright (C) 1997 Paul Mackerras. - * - * BenH: Changed to match those of heathrow (but not all of them). Please - * check if I didn't break anything (especially the media bay). - */ - -/* offset from ohare base for feature control register */ -#define OHARE_MBCR 0x34 -#define OHARE_FCR 0x38 - -/* - * Bits in feature control register. - * These were mostly derived by experiment on a powerbook 3400 - * and may differ for other machines. - */ -#define OH_SCC_RESET 1 -#define OH_BAY_POWER_N 2 /* a guess */ -#define OH_BAY_PCI_ENABLE 4 /* a guess */ -#define OH_BAY_IDE_ENABLE 8 -#define OH_BAY_FLOPPY_ENABLE 0x10 -#define OH_IDE0_ENABLE 0x20 -#define OH_IDE0_RESET_N 0x40 /* a guess */ -#define OH_BAY_DEV_MASK 0x1c -#define OH_BAY_RESET_N 0x80 -#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ -#define OH_SCC_ENABLE 0x200 -#define OH_MESH_ENABLE 0x400 -#define OH_FLOPPY_ENABLE 0x800 -#define OH_SCCA_IO 0x4000 -#define OH_SCCB_IO 0x8000 -#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ -#define OH_IDE1_RESET_N 0x800000 - -/* - * Bits to set in the feature control register on PowerBooks. - */ -#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ - OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) - -/* - * A magic value to put into the feature control register of the - * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. - * Contributed by Harry Eaton. - */ -#define STARMAX_FEATURES 0xbeff7a diff --git a/include/asm-ppc/pmac_feature.h b/include/asm-ppc/pmac_feature.h deleted file mode 100644 index e9683bcff19..00000000000 --- a/include/asm-ppc/pmac_feature.h +++ /dev/null @@ -1,380 +0,0 @@ -/* - * Definition of platform feature hooks for PowerMacs - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Paul Mackerras & - * Ben. Herrenschmidt. - * - * - * Note: I removed media-bay details from the feature stuff, I believe it's - * not worth it, the media-bay driver can directly use the mac-io - * ASIC registers. - * - * Implementation note: Currently, none of these functions will block. - * However, they may internally protect themselves with a spinlock - * for way too long. Be prepared for at least some of these to block - * in the future. - * - * Unless specifically defined, the result code is assumed to be an - * error when negative, 0 is the default success result. Some functions - * may return additional positive result values. - * - * To keep implementation simple, all feature calls are assumed to have - * the prototype parameters (struct device_node* node, int value). - * When either is not used, pass 0. - */ - -#ifdef __KERNEL__ -#ifndef __PPC_ASM_PMAC_FEATURE_H -#define __PPC_ASM_PMAC_FEATURE_H - -#include -#include - -/* - * Known Mac motherboard models - * - * Please, report any error here to benh@kernel.crashing.org, thanks ! - * - * Note that I don't fully maintain this list for Core99 & MacRISC2 - * and I'm considering removing all NewWorld entries from it and - * entirely rely on the model string. - */ - -/* PowerSurge are the first generation of PCI Pmacs. This include - * all of the Grand-Central based machines. We currently don't - * differenciate most of them. - */ -#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ -#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ - -/* Here is the infamous serie of OHare based machines - */ -#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */ -#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */ -#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ -#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ -#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ -#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ - -/* Here are the Heathrow based machines - * FIXME: Differenciate wallstreet,mainstreet,wallstreetII - */ -#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ -#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ -#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ -#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ - -/* Here are newworld machines based on Paddington (heathrow derivative) - */ -#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ -#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ -#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ -#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ -#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ - -/* Core99 machines based on UniNorth 1.0 and 1.5 - * - * Note: A single entry here may cover several actual models according - * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most - * FireWire based iMacs, etc...). Those machines are too similar to be - * distinguished here, when they need to be differencied, use the - * device-tree "model" or "compatible" property. - */ -#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ -#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ -#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ -#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ -#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ -#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ -#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ -#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ -#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ -#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ -#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ -#define PMAC_TYPE_EMAC 0x50 /* eMac */ -#define PMAC_TYPE_UNKNOWN_CORE99 0x5f - -/* MacRisc2 with UniNorth 2.0 */ -#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ -#define PMAC_TYPE_WINDTUNNEL 0x81 - -/* MacRISC2 machines based on the Pangea chipset - */ -#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ -#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ -#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ -#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f - -/* MacRISC2 machines based on the Intrepid chipset - */ -#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ - -/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, - * but rather machine families - */ -#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ -#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ -#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ -#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ -#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ - -/* - * Motherboard flags - */ - -#define PMAC_MB_CAN_SLEEP 0x00000001 -#define PMAC_MB_HAS_FW_POWER 0x00000002 -#define PMAC_MB_OLD_CORE99 0x00000004 -#define PMAC_MB_MOBILE 0x00000008 -#define PMAC_MB_MAY_SLEEP 0x00000010 - -/* - * Feature calls supported on pmac - * - */ - -/* - * Use this inline wrapper - */ -struct device_node; - -static inline long pmac_call_feature(int selector, struct device_node* node, - long param, long value) -{ - if (!ppc_md.feature_call) - return -ENODEV; - return ppc_md.feature_call(selector, node, param, value); -} - -/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) - * enable/disable an SCC side. Pass the node corresponding to the - * channel side as a parameter. - * param is the type of port - * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled - * for use by xmon. - */ -#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) - #define PMAC_SCC_ASYNC 0 - #define PMAC_SCC_IRDA 1 - #define PMAC_SCC_I2S1 2 - #define PMAC_SCC_FLAG_XMON 0x00001000 - -/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) - * enable/disable the internal modem. - */ -#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) - -/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) - * enable/disable the swim3 (floppy) cell of a mac-io ASIC - */ -#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) - -/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) - * enable/disable the mesh (scsi) cell of a mac-io ASIC - */ -#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) - -/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) - * enable/disable an IDE port of a mac-io ASIC - * pass the busID parameter - */ -#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) - -/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) - * assert(1)/release(0) an IDE reset line (mac-io IDE only) - */ -#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) - -/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive - * it's reset line - */ -#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) - -/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) - * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This - * control the cell's clock. - */ -#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) - -/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) - * Perform a HW reset of the PHY connected to a gmac controller. - * Pass the gmac device node, not the PHY node. - */ -#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) - -/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) - * enable/disable the sound chip, whatever it is and provided it can - * acually be controlled - */ -#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) - -/* -- add various tweaks related to sound routing -- */ - -/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) - * enable/disable the airport card - */ -#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) - -/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) - * toggle the reset line of a CPU on an uninorth-based SMP machine - */ -#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) - -/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) - * enable/disable an USB cell, along with the power of the USB "pad" - * on keylargo based machines - */ -#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) - -/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) - * enable/disable the firewire cell of an uninorth ASIC. - */ -#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) - -/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) - * enable/disable the firewire cable power supply of the uninorth - * firewire cell - */ -#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) - -/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) - * set the sleep state of the motherboard. - * - * Pass -1 as value to query for sleep capability - * Pass 1 to set IOs to sleep - * Pass 0 to set IOs to wake - */ -#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) - -/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) - * - * returns some motherboard infos. - * selector: 0 - model id - * 1 - model flags (capabilities) - * 2 - model name (cast to const char *) - */ -#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) -#define PMAC_MB_INFO_MODEL 0 -#define PMAC_MB_INFO_FLAGS 1 -#define PMAC_MB_INFO_NAME 2 - -/* PMAC_FTR_READ_GPIO (NULL, int index, 0) - * - * read a GPIO from a mac-io controller of type KeyLargo or Pangea. - * the value returned is a byte (positive), or a negative error code - */ -#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) - -/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) - * - * write a GPIO of a mac-io controller of type KeyLargo or Pangea. - */ -#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) - -/* PMAC_FTR_ENABLE_MPIC - * - * Enable the MPIC cell - */ -#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) - -/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) - * - * Enable/disable the AACK delay on the northbridge for systems using DFS - */ -#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) - -/* PMAC_FTR_DEVICE_CAN_WAKE - * - * Used by video drivers to inform system that they can actually perform - * wakeup from sleep - */ -#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) - - -/* Don't use those directly, they are for the sake of pmac_setup.c */ -extern long pmac_do_feature_call(unsigned int selector, ...); -extern void pmac_feature_init(void); - -/* Video suspend tweak */ -extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); -extern void pmac_call_early_video_resume(void); - -#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x)) - -/* The AGP driver registers itself here */ -extern void pmac_register_agp_pm(struct pci_dev *bridge, - int (*suspend)(struct pci_dev *bridge), - int (*resume)(struct pci_dev *bridge)); - -/* Those are meant to be used by video drivers to deal with AGP - * suspend resume properly - */ -extern void pmac_suspend_agp_for_card(struct pci_dev *dev); -extern void pmac_resume_agp_for_card(struct pci_dev *dev); - -/* Used by the via-pmu driver for suspend/resume - */ -extern void pmac_tweak_clock_spreading(int enable); - -/* - * The part below is for use by macio_asic.c only, do not rely - * on the data structures or constants below in a normal driver - * - */ - -#define MAX_MACIO_CHIPS 2 - -enum { - macio_unknown = 0, - macio_grand_central, - macio_ohare, - macio_ohareII, - macio_heathrow, - macio_gatwick, - macio_paddington, - macio_keylargo, - macio_pangea, - macio_intrepid, - macio_keylargo2, -}; - -struct macio_chip -{ - struct device_node *of_node; - int type; - const char *name; - int rev; - volatile u32 __iomem *base; - unsigned long flags; - - /* For use by macio_asic PCI driver */ - struct macio_bus lbus; -}; - -extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; - -#define MACIO_FLAG_SCCA_ON 0x00000001 -#define MACIO_FLAG_SCCB_ON 0x00000002 -#define MACIO_FLAG_SCC_LOCKED 0x00000004 -#define MACIO_FLAG_AIRPORT_ON 0x00000010 -#define MACIO_FLAG_FW_SUPPORTED 0x00000020 - -extern struct macio_chip* macio_find(struct device_node* child, int type); - -#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) -#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) - -#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) -#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) -#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) -#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) -#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) -#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) - -#endif /* __PPC_ASM_PMAC_FEATURE_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/pmac_low_i2c.h b/include/asm-ppc/pmac_low_i2c.h deleted file mode 100644 index 809a5963d5e..00000000000 --- a/include/asm-ppc/pmac_low_i2c.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-ppc/pmac_low_i2c.h - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef __PMAC_LOW_I2C_H__ -#define __PMAC_LOW_I2C_H__ - -/* i2c mode (based on the platform functions format) */ -enum { - pmac_low_i2c_mode_dumb = 1, - pmac_low_i2c_mode_std = 2, - pmac_low_i2c_mode_stdsub = 3, - pmac_low_i2c_mode_combined = 4, -}; - -/* RW bit in address */ -enum { - pmac_low_i2c_read = 0x01, - pmac_low_i2c_write = 0x00 -}; - -/* Init, called early during boot */ -extern void pmac_init_low_i2c(void); - -/* Locking functions exposed to i2c-keywest */ -int pmac_low_i2c_lock(struct device_node *np); -int pmac_low_i2c_unlock(struct device_node *np); - -/* Access functions for platform code */ -int pmac_low_i2c_open(struct device_node *np, int channel); -int pmac_low_i2c_close(struct device_node *np); -int pmac_low_i2c_setmode(struct device_node *np, int mode); -int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len); - - -#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/include/asm-ppc/uninorth.h b/include/asm-ppc/uninorth.h deleted file mode 100644 index f737732c386..00000000000 --- a/include/asm-ppc/uninorth.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * uninorth.h: definitions for using the "UniNorth" host bridge chip - * from Apple. This chip is used on "Core99" machines - * This also includes U2 used on more recent MacRISC2/3 - * machines and U3 (G5) - * - */ -#ifdef __KERNEL__ -#ifndef __ASM_UNINORTH_H__ -#define __ASM_UNINORTH_H__ - -/* - * Uni-N and U3 config space reg. definitions - * - * (Little endian) - */ - -/* Address ranges selection. This one should work with Bandit too */ -/* Not U3 */ -#define UNI_N_ADDR_SELECT 0x48 -#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ -#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ - -/* AGP registers */ -/* Not U3 */ -#define UNI_N_CFG_GART_BASE 0x8c -#define UNI_N_CFG_AGP_BASE 0x90 -#define UNI_N_CFG_GART_CTRL 0x94 -#define UNI_N_CFG_INTERNAL_STATUS 0x98 -#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 - -/* UNI_N_CFG_GART_CTRL bits definitions */ -#define UNI_N_CFG_GART_INVAL 0x00000001 -#define UNI_N_CFG_GART_ENABLE 0x00000100 -#define UNI_N_CFG_GART_2xRESET 0x00010000 -#define UNI_N_CFG_GART_DISSBADET 0x00020000 -/* The following seems to only be used only on U3 */ -#define U3_N_CFG_GART_SYNCMODE 0x00040000 -#define U3_N_CFG_GART_PERFRD 0x00080000 -#define U3_N_CFG_GART_B2BGNT 0x00200000 -#define U3_N_CFG_GART_FASTDDR 0x00400000 - -/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, - * revision 1.5 (x4 AGP) may need further changes. - * - * AGP_BASE register contains the base address of the AGP aperture on - * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, - * even if decoding of this address range is enabled in the address select - * register. Apparently, the only supported bases are 256Mb multiples - * (high 4 bits of that register). - * - * GART_BASE register appear to contain the physical address of the GART - * in system memory in the high address bits (page aligned), and the - * GART size in the low order bits (number of GART pages) - * - * The GART format itself is one 32bits word per physical memory page. - * This word contains, in little-endian format (!!!), the physical address - * of the page in the high bits, and what appears to be an "enable" bit - * in the LSB bit (0) that must be set to 1 when the entry is valid. - * - * Obviously, the GART is not cache coherent and so any change to it - * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself doens't seem to be cache coherent neither. - * - * In order to invalidate the GART (which is probably necessary to inval - * the bridge internal TLBs), the following sequence has to be written, - * in order, to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * UNI_N_CFG_GART_ENABLE - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET - * UNI_N_CFG_GART_ENABLE - * - * As far as AGP "features" are concerned, it looks like fast write may - * not be supported but this has to be confirmed. - * - * Turning on AGP seem to require a double invalidate operation, one before - * setting the AGP command register, on after. - * - * Turning off AGP seems to require the following sequence: first wait - * for the AGP to be idle by reading the internal status register, then - * write in that order to the GART_CTRL register: - * - * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL - * 0 - * UNI_N_CFG_GART_2xRESET - * 0 - */ - -/* - * Uni-N memory mapped reg. definitions - * - * Those registers are Big-Endian !! - * - * Their meaning come from either Darwin and/or from experiments I made with - * the bootrom, I'm not sure about their exact meaning yet - * - */ - -/* Version of the UniNorth chip */ -#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ - -#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ -#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ -#define UNI_N_VERSION_150 0x0011 /* 1.5 */ -#define UNI_N_VERSION_200 0x0024 /* 2.0 */ -#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ -#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ -#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ - -/* This register is used to enable/disable various clocks */ -#define UNI_N_CLOCK_CNTL 0x0020 -#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ -#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ -#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ -#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ - -/* Power Management control */ -#define UNI_N_POWER_MGT 0x0030 -#define UNI_N_POWER_MGT_NORMAL 0x00 -#define UNI_N_POWER_MGT_IDLE2 0x01 -#define UNI_N_POWER_MGT_SLEEP 0x02 - -/* This register is configured by Darwin depending on the UniN - * revision - */ -#define UNI_N_ARB_CTRL 0x0040 -#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 -#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 -#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 -#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 - -/* This one _might_ return the CPU number of the CPU reading it; - * the bootROM decides whether to boot or to sleep/spinloop depending - * on this register beeing 0 or not - */ -#define UNI_N_CPU_NUMBER 0x0050 - -/* This register appear to be read by the bootROM to decide what - * to do on a non-recoverable reset (powerup or wakeup) - */ -#define UNI_N_HWINIT_STATE 0x0070 -#define UNI_N_HWINIT_STATE_SLEEPING 0x01 -#define UNI_N_HWINIT_STATE_RUNNING 0x02 -/* This last bit appear to be used by the bootROM to know the second - * CPU has started and will enter it's sleep loop with IP=0 - */ -#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 - -/* This register controls AACK delay, which is set when 2004 iBook/PowerBook - * is in low speed mode. - */ -#define UNI_N_AACK_DELAY 0x0100 -#define UNI_N_AACK_DELAY_ENABLE 0x00000001 - -/* Clock status for Intrepid */ -#define UNI_N_CLOCK_STOP_STATUS0 0x0150 -#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 -#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 -#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 -#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 -#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 -#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 -#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 -#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 -#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 -#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 -#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 -#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 -#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 -#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 -#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 -#define UNI_N_CLOCK_STOPPED_32 0x00000004 -#define UNI_N_CLOCK_STOPPED_45 0x00000002 -#define UNI_N_CLOCK_STOPPED_49 0x00000001 - -#define UNI_N_CLOCK_STOP_STATUS1 0x0160 -#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 -#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 -#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 -#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 -#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 -#define UNI_N_CLOCK_STOPPED_FW 0x00004000 -#define UNI_N_CLOCK_STOPPED_GB 0x00002000 -#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 -#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 -#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 -#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 -#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 -#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 -#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 -#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 -#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 -#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 -#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 -#define UNI_N_CLOCK_STOPPED_18 0x00000001 - -/* Intrepid registe to OF do-platform-clockspreading */ -#define UNI_N_CLOCK_SPREADING 0x190 - -/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ - - -/* - * U3 specific registers - */ - - -/* U3 Toggle */ -#define U3_TOGGLE_REG 0x00e0 -#define U3_PMC_START_STOP 0x0001 -#define U3_MPIC_RESET 0x0002 -#define U3_MPIC_OUTPUT_ENABLE 0x0004 - -/* U3 API PHY Config 1 */ -#define U3_API_PHY_CONFIG_1 0x23030 - -/* U3 HyperTransport registers */ -#define U3_HT_CONFIG_BASE 0x70000 -#define U3_HT_LINK_COMMAND 0x100 -#define U3_HT_LINK_CONFIG 0x110 -#define U3_HT_LINK_FREQ 0x120 - -#endif /* __ASM_UNINORTH_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc64/dbdma.h b/include/asm-ppc64/dbdma.h deleted file mode 100644 index f2d5d5dc337..00000000000 --- a/include/asm-ppc64/dbdma.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - diff --git a/include/asm-ppc64/keylargo.h b/include/asm-ppc64/keylargo.h deleted file mode 100644 index 4d78e3d0314..00000000000 --- a/include/asm-ppc64/keylargo.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - diff --git a/include/asm-ppc64/macio.h b/include/asm-ppc64/macio.h deleted file mode 100644 index a3028b364f7..00000000000 --- a/include/asm-ppc64/macio.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - diff --git a/include/asm-ppc64/pmac_feature.h b/include/asm-ppc64/pmac_feature.h deleted file mode 100644 index e07e36c4cbb..00000000000 --- a/include/asm-ppc64/pmac_feature.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - diff --git a/include/asm-ppc64/pmac_low_i2c.h b/include/asm-ppc64/pmac_low_i2c.h deleted file mode 100644 index 7bcfc72c5c8..00000000000 --- a/include/asm-ppc64/pmac_low_i2c.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - diff --git a/include/asm-ppc64/smu.h b/include/asm-ppc64/smu.h deleted file mode 100644 index dee8eefe47b..00000000000 --- a/include/asm-ppc64/smu.h +++ /dev/null @@ -1,379 +0,0 @@ -#ifndef _SMU_H -#define _SMU_H - -/* - * Definitions for talking to the SMU chip in newer G5 PowerMacs - */ - -#include -#include - -/* - * Known SMU commands - * - * Most of what is below comes from looking at the Open Firmware driver, - * though this is still incomplete and could use better documentation here - * or there... - */ - - -/* - * Partition info commands - * - * I do not know what those are for at this point - */ -#define SMU_CMD_PARTITION_COMMAND 0x3e - - -/* - * Fan control - * - * This is a "mux" for fan control commands, first byte is the - * "sub" command. - */ -#define SMU_CMD_FAN_COMMAND 0x4a - - -/* - * Battery access - * - * Same command number as the PMU, could it be same syntax ? - */ -#define SMU_CMD_BATTERY_COMMAND 0x6f -#define SMU_CMD_GET_BATTERY_INFO 0x00 - -/* - * Real time clock control - * - * This is a "mux", first data byte contains the "sub" command. - * The "RTC" part of the SMU controls the date, time, powerup - * timer, but also a PRAM - * - * Dates are in BCD format on 7 bytes: - * [sec] [min] [hour] [weekday] [month day] [month] [year] - * with month being 1 based and year minus 100 - */ -#define SMU_CMD_RTC_COMMAND 0x8e -#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */ -#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */ -#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02 -#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */ -#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */ -#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */ -#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */ -#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */ -#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */ -#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */ -#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */ -#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */ - - /* - * i2c commands - * - * To issue an i2c command, first is to send a parameter block to the - * the SMU. This is a command of type 0x9a with 9 bytes of header - * eventually followed by data for a write: - * - * 0: bus number (from device-tree usually, SMU has lots of busses !) - * 1: transfer type/format (see below) - * 2: device address. For combined and combined4 type transfers, this - * is the "write" version of the address (bit 0x01 cleared) - * 3: subaddress length (0..3) - * 4: subaddress byte 0 (or only byte for subaddress length 1) - * 5: subaddress byte 1 - * 6: subaddress byte 2 - * 7: combined address (device address for combined mode data phase) - * 8: data length - * - * The transfer types are the same good old Apple ones it seems, - * that is: - * - 0x00: Simple transfer - * - 0x01: Subaddress transfer (addr write + data tx, no restart) - * - 0x02: Combined transfer (addr write + restart + data tx) - * - * This is then followed by actual data for a write. - * - * At this point, the OF driver seems to have a limitation on transfer - * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know - * wether this is just an OF limit due to some temporary buffer size - * or if this is an SMU imposed limit. This driver has the same limitation - * for now as I use a 0x10 bytes temporary buffer as well - * - * Once that is completed, a response is expected from the SMU. This is - * obtained via a command of type 0x9a with a length of 1 byte containing - * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's - * though I can't tell yet if this is actually necessary. Once this command - * is complete, at this point, all I can tell is what OF does. OF tests - * byte 0 of the reply: - * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ? - * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0) - * - on write, < 0 -> failure (immediate exit) - * - else, OF just exists (without error, weird) - * - * So on read, there is this wait-for-busy thing when getting a 0xfc or - * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and - * doing the above again until either the retries expire or the result - * is no longer 0xfe or 0xfc - * - * The Darwin I2C driver is less subtle though. On any non-success status - * from the response command, it waits 5ms and tries again up to 20 times, - * it doesn't differenciate between fatal errors or "busy" status. - * - * This driver provides an asynchronous paramblock based i2c command - * interface to be used either directly by low level code or by a higher - * level driver interfacing to the linux i2c layer. The current - * implementation of this relies on working timers & timer interrupts - * though, so be careful of calling context for now. This may be "fixed" - * in the future by adding a polling facility. - */ -#define SMU_CMD_I2C_COMMAND 0x9a - /* transfer types */ -#define SMU_I2C_TRANSFER_SIMPLE 0x00 -#define SMU_I2C_TRANSFER_STDSUB 0x01 -#define SMU_I2C_TRANSFER_COMBINED 0x02 - -/* - * Power supply control - * - * The "sub" command is an ASCII string in the data, the - * data lenght is that of the string. - * - * The VSLEW command can be used to get or set the voltage slewing. - * - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of - * reply at data offset 6, 7 and 8. - * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is - * used to set the voltage slewing point. The SMU replies with "DONE" - * I yet have to figure out their exact meaning of those 3 bytes in - * both cases. - * - */ -#define SMU_CMD_POWER_COMMAND 0xaa -#define SMU_CMD_POWER_RESTART "RESTART" -#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" -#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" - -/* Misc commands - * - * This command seem to be a grab bag of various things - */ -#define SMU_CMD_MISC_df_COMMAND 0xdf -#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 /* i: 1 byte */ -#define SMU_CMD_MISC_df_NMI_OPTION 0x04 - -/* - * Version info commands - * - * I haven't quite tried to figure out how these work - */ -#define SMU_CMD_VERSION_COMMAND 0xea - - -/* - * Misc commands - * - * This command seem to be a grab bag of various things - */ -#define SMU_CMD_MISC_ee_COMMAND 0xee -#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 -#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */ -#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */ - - - -/* - * - Kernel side interface - - */ - -#ifdef __KERNEL__ - -/* - * Asynchronous SMU commands - * - * Fill up this structure and submit it via smu_queue_command(), - * and get notified by the optional done() callback, or because - * status becomes != 1 - */ - -struct smu_cmd; - -struct smu_cmd -{ - /* public */ - u8 cmd; /* command */ - int data_len; /* data len */ - int reply_len; /* reply len */ - void *data_buf; /* data buffer */ - void *reply_buf; /* reply buffer */ - int status; /* command status */ - void (*done)(struct smu_cmd *cmd, void *misc); - void *misc; - - /* private */ - struct list_head link; -}; - -/* - * Queues an SMU command, all fields have to be initialized - */ -extern int smu_queue_cmd(struct smu_cmd *cmd); - -/* - * Simple command wrapper. This structure embeds a small buffer - * to ease sending simple SMU commands from the stack - */ -struct smu_simple_cmd -{ - struct smu_cmd cmd; - u8 buffer[16]; -}; - -/* - * Queues a simple command. All fields will be initialized by that - * function - */ -extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, - unsigned int data_len, - void (*done)(struct smu_cmd *cmd, void *misc), - void *misc, - ...); - -/* - * Completion helper. Pass it to smu_queue_simple or as 'done' - * member to smu_queue_cmd, it will call complete() on the struct - * completion passed in the "misc" argument - */ -extern void smu_done_complete(struct smu_cmd *cmd, void *misc); - -/* - * Synchronous helpers. Will spin-wait for completion of a command - */ -extern void smu_spinwait_cmd(struct smu_cmd *cmd); - -static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd) -{ - smu_spinwait_cmd(&scmd->cmd); -} - -/* - * Poll routine to call if blocked with irqs off - */ -extern void smu_poll(void); - - -/* - * Init routine, presence check.... - */ -extern int smu_init(void); -extern int smu_present(void); -struct of_device; -extern struct of_device *smu_get_ofdev(void); - - -/* - * Common command wrappers - */ -extern void smu_shutdown(void); -extern void smu_restart(void); -struct rtc_time; -extern int smu_get_rtc_time(struct rtc_time *time, int spinwait); -extern int smu_set_rtc_time(struct rtc_time *time, int spinwait); - -/* - * SMU command buffer absolute address, exported by pmac_setup, - * this is allocated very early during boot. - */ -extern unsigned long smu_cmdbuf_abs; - - -/* - * Kenrel asynchronous i2c interface - */ - -/* SMU i2c header, exactly matches i2c header on wire */ -struct smu_i2c_param -{ - u8 bus; /* SMU bus ID (from device tree) */ - u8 type; /* i2c transfer type */ - u8 devaddr; /* device address (includes direction) */ - u8 sublen; /* subaddress length */ - u8 subaddr[3]; /* subaddress */ - u8 caddr; /* combined address, filled by SMU driver */ - u8 datalen; /* length of transfer */ - u8 data[7]; /* data */ -}; - -#define SMU_I2C_READ_MAX 0x0d -#define SMU_I2C_WRITE_MAX 0x05 - -struct smu_i2c_cmd -{ - /* public */ - struct smu_i2c_param info; - void (*done)(struct smu_i2c_cmd *cmd, void *misc); - void *misc; - int status; /* 1 = pending, 0 = ok, <0 = fail */ - - /* private */ - struct smu_cmd scmd; - int read; - int stage; - int retries; - u8 pdata[0x10]; - struct list_head link; -}; - -/* - * Call this to queue an i2c command to the SMU. You must fill info, - * including info.data for a write, done and misc. - * For now, no polling interface is provided so you have to use completion - * callback. - */ -extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); - - -#endif /* __KERNEL__ */ - -/* - * - Userland interface - - */ - -/* - * A given instance of the device can be configured for 2 different - * things at the moment: - * - * - sending SMU commands (default at open() time) - * - receiving SMU events (not yet implemented) - * - * Commands are written with write() of a command block. They can be - * "driver" commands (for example to switch to event reception mode) - * or real SMU commands. They are made of a header followed by command - * data if any. - * - * For SMU commands (not for driver commands), you can then read() back - * a reply. The reader will be blocked or not depending on how the device - * file is opened. poll() isn't implemented yet. The reply will consist - * of a header as well, followed by the reply data if any. You should - * always provide a buffer large enough for the maximum reply data, I - * recommand one page. - * - * It is illegal to send SMU commands through a file descriptor configured - * for events reception - * - */ -struct smu_user_cmd_hdr -{ - __u32 cmdtype; -#define SMU_CMDTYPE_SMU 0 /* SMU command */ -#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ - - __u8 cmd; /* SMU command byte */ - __u32 data_len; /* Lenght of data following */ -}; - -struct smu_user_reply_hdr -{ - __u32 status; /* Command status */ - __u32 reply_len; /* Lenght of data follwing */ -}; - -#endif /* _SMU_H */ diff --git a/include/asm-ppc64/uninorth.h b/include/asm-ppc64/uninorth.h deleted file mode 100644 index 7ad7059f2c8..00000000000 --- a/include/asm-ppc64/uninorth.h +++ /dev/null @@ -1,2 +0,0 @@ -#include - -- cgit v1.2.3