From 6c7425095c9ee23d080dba3e27217a254cce4562 Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou Date: Fri, 3 Oct 2008 16:57:50 +0200 Subject: ASoC: Merge AT91 and AVR32 support into a single atmel architecture The Ateml AT91 and AVR32 SoC share common IP for audio and can share the same driver code using the atmel-ssc API provided for both architectures. Do this, creating a new unified atmel ASoC architecture to replace the previous at32 and at91 ones. [This was contributed as a patch series for reviewability but has been squashed down to a single commit to help preserve both the history and bisectability. A small bugfix from Jukka is included.] Tested-by: Jukka Hynninen Signed-off-by: Sedji Gaouaou Signed-off-by: Mark Brown --- sound/soc/atmel/Kconfig | 43 +++ sound/soc/atmel/Makefile | 15 + sound/soc/atmel/atmel-pcm.c | 484 ++++++++++++++++++++++++ sound/soc/atmel/atmel-pcm.h | 86 +++++ sound/soc/atmel/atmel_ssc_dai.c | 782 +++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/atmel_ssc_dai.h | 121 ++++++ sound/soc/atmel/playpaq_wm8510.c | 513 +++++++++++++++++++++++++ 7 files changed, 2044 insertions(+) create mode 100644 sound/soc/atmel/Kconfig create mode 100644 sound/soc/atmel/Makefile create mode 100644 sound/soc/atmel/atmel-pcm.c create mode 100644 sound/soc/atmel/atmel-pcm.h create mode 100644 sound/soc/atmel/atmel_ssc_dai.c create mode 100644 sound/soc/atmel/atmel_ssc_dai.h create mode 100644 sound/soc/atmel/playpaq_wm8510.c (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 00000000000..a608d7009db --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,43 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on ARCH_AT91 || AVR32 + help + Say Y or M if you want to add support for codecs attached to + the ATMEL SSC interface. You will also need + to select the audio interfaces to support below. + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile new file mode 100644 index 00000000000..f54a7cc68e6 --- /dev/null +++ b/sound/soc/atmel/Makefile @@ -0,0 +1,15 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-objs := atmel-pcm.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c new file mode 100644 index 00000000000..394412fb396 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.c @@ -0,0 +1,484 @@ +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou + * + * Based on at91-pcm. by: + * Frank Mandarino + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "atmel-pcm.h" + + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, +}; + + +/*--------------------------------------------------------------------------*\ + * Data types +\*--------------------------------------------------------------------------*/ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ + + /* PDC register save */ + u32 pdc_xpr_save; + u32 pdc_xcr_save; + u32 pdc_xnpr_save; + u32 pdc_xncr_save; +}; + + +/*--------------------------------------------------------------------------*\ + * Helper functions +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = atmel_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + pr_debug("atmel-pcm:" + "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, + (void *) buf->addr, + size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} +/*--------------------------------------------------------------------------*\ + * ISR +\*--------------------------------------------------------------------------*/ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + static int count; + + count++; + + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warning("atmel-pcm: buffer %s on %s" + " (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + snd_pcm_period_elapsed(substream); +} + + +/*--------------------------------------------------------------------------*\ + * PCM operations +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params */ + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = rtd->dai->cpu_dai->dma_data; + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + pr_debug("atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%u, period_size=%u)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); + return 0; +} + +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + return 0; +} + +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + int ret = 0; + + pr_debug("atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %u\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + pr_debug("atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + pr_debug("sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + +static int atmel_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + out: + return ret; +} + +static int atmel_pcm_close(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, +}; + + +/*--------------------------------------------------------------------------*\ + * ASoC platform driver +\*--------------------------------------------------------------------------*/ +static u64 atmel_pcm_dmamask = 0xffffffff; + +static int atmel_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + int ret = 0; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &atmel_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->capture.channels_min) { + pr_debug("at32-pcm:" + "Allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} + +static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +#ifdef CONFIG_PM +static int atmel_pcm_suspend(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* disable the PDC and save the PDC registers */ + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + + prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); + prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); + prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); + prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); + + return 0; +} + +static int atmel_pcm_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* restore the PDC registers and enable the PDC */ + ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); + ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); + ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + return 0; +} +#else +#define atmel_pcm_suspend NULL +#define atmel_pcm_resume NULL +#endif + +struct snd_soc_platform atmel_soc_platform = { + .name = "atmel-audio", + .pcm_ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free_dma_buffers, + .suspend = atmel_pcm_suspend, + .resume = atmel_pcm_resume, +}; +EXPORT_SYMBOL_GPL(atmel_soc_platform); + +MODULE_AUTHOR("Sedji Gaouaou "); +MODULE_DESCRIPTION("Atmel PCM module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 00000000000..ec9b2824b66 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,86 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou + * + * Based on at91-pcm. by: + * Frank Mandarino + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +extern struct snd_soc_platform atmel_soc_platform; + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* _ATMEL_PCM_H */ diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 00000000000..d290b789491 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,782 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino + * Based on pxa2xx Platform drivers by + * Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir_mask = SSC_DIR_MASK_PLAYBACK; + else + dir_mask = SSC_DIR_MASK_CAPTURE; + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + if (ssc_p->initialized) { + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + + +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 00000000000..a828746e8a2 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,121 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino + * Based on pxa2xx Platform drivers by + * Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include +#include + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of . These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; +}; +extern struct snd_soc_dai atmel_ssc_dai[]; + +#endif /* _AT91_SSC_DAI_H */ diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c new file mode 100644 index 00000000000..5b07cf7ea4e --- /dev/null +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -0,0 +1,513 @@ +/* sound/soc/at32/playpaq_wm8510.c + * ASoC machine driver for PlayPaq using WM8510 codec + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c + * + * NOTE: If you don't have the AT32 enhanced portmux configured (which + * isn't currently in the mainline or Atmel patched kernel), you will + * need to set the MCLK pin (PA30) to peripheral A in your board initialization + * code. Something like: + * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + * + */ + +/* #define DEBUG */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include "../codecs/wm8510.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +/*-------------------------------------------------------------------------*\ + * constants +\*-------------------------------------------------------------------------*/ +#define MCLK_PIN GPIO_PIN_PA(30) +#define MCLK_PERIPH GPIO_PERIPH_A + + +/*-------------------------------------------------------------------------*\ + * data types +\*-------------------------------------------------------------------------*/ +/* SSC clocking data */ +struct ssc_clock_data { + /* CMR div */ + unsigned int cmr_div; + + /* Frame period (as needed by xCMR.PERIOD) */ + unsigned int period; + + /* The SSC clock rate these settings where calculated for */ + unsigned long ssc_rate; +}; + + +/*-------------------------------------------------------------------------*\ + * module data +\*-------------------------------------------------------------------------*/ +static struct clk *_gclk0; +static struct clk *_pll0; + +#define CODEC_CLK (_gclk0) + + +/*-------------------------------------------------------------------------*\ + * Sound SOC operations +\*-------------------------------------------------------------------------*/ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE +static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + struct ssc_clock_data cd; + unsigned int rate, width_bits, channels; + unsigned int bitrate, ssc_div; + unsigned actual_rate; + + + /* + * Figure out required bitrate + */ + rate = params_rate(params); + channels = params_channels(params); + width_bits = snd_pcm_format_physical_width(params_format(params)); + bitrate = rate * width_bits * channels; + + + /* + * Figure out required SSC divider and period for required bitrate + */ + cd.ssc_rate = clk_get_rate(ssc->clk); + ssc_div = cd.ssc_rate / bitrate; + cd.cmr_div = ssc_div / 2; + if (ssc_div & 1) { + /* round cmr_div up */ + cd.cmr_div++; + } + cd.period = width_bits - 1; + + + /* + * Find actual rate, compare to requested rate + */ + actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); + pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", + rate, actual_rate); + + + return cd; +} +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + +static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + unsigned int pll_out = 0, bclk = 0, mclk_div = 0; + int ret; + + + /* Due to difficulties with getting the correct clocks from the AT32's + * PLL0, we're going to let the CODEC be in charge of all the clocks + */ +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); +#else + struct ssc_clock_data cd; + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); +#endif + + if (ssc == NULL) { + pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + + /* + * Figure out PLL and BCLK dividers for WM8510 + */ + switch (params_rate(params)) { + case 48000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 44100: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 22050: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_2; + bclk = WM8510_BCLKDIV_8; + break; + + case 16000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_3; + bclk = WM8510_BCLKDIV_8; + break; + + case 11025: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_4; + bclk = WM8510_BCLKDIV_8; + break; + + case 8000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_6; + bclk = WM8510_BCLKDIV_8; + break; + + default: + pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", + params_rate(params)); + return -EINVAL; + } + + + /* + * set CPU and CODEC DAI configuration + */ + ret = snd_soc_dai_set_fmt(codec_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CODEC DAI format (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU DAI format (%d)\n", + ret); + return ret; + } + + + /* + * Set CPU clock configuration + */ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); + pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", + cd.cmr_div, cd.period); + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, + cd.period); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU transmit period (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + /* + * Set CODEC clock configuration + */ + pr_debug("playpaq_wm8510: " + "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", + clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); + + +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); + if (ret < 0) { + pr_warning + ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + ret = snd_soc_dai_set_pll(codec_dai, 0, + clk_get_rate(CODEC_CLK), pll_out); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", + ret); + return ret; + } + + + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", + ret); + return ret; + } + + + return 0; +} + + + +static struct snd_soc_ops playpaq_wm8510_ops = { + .hw_params = playpaq_wm8510_hw_params, +}; + + + +static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + + + +static const struct snd_soc_dapm_route intercon[] = { + /* speaker connected to SPKOUT */ + {"Ext Spk", NULL, "SPKOUTP"}, + {"Ext Spk", NULL, "SPKOUTN"}, + + {"Mic Bias", NULL, "Int Mic"}, + {"MICN", NULL, "Mic Bias"}, + {"MICP", NULL, "Mic Bias"}, +}; + + + +static int playpaq_wm8510_init(struct snd_soc_codec *codec) +{ + int i; + + /* + * Add DAPM widgets + */ + for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); + + + + /* + * Setup audio path interconnects + */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + + + /* always connected pins */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + snd_soc_dapm_sync(codec); + + + + /* Make CSB show PLL rate */ + snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, + WM8510_OPCLKDIV_1 | 4); + + return 0; +} + + + +static struct snd_soc_dai_link playpaq_wm8510_dai = { + .name = "WM8510", + .stream_name = "WM8510 PCM", + .cpu_dai = &at32_ssc_dai[0], + .codec_dai = &wm8510_dai, + .init = playpaq_wm8510_init, + .ops = &playpaq_wm8510_ops, +}; + + + +static struct snd_soc_machine snd_soc_machine_playpaq = { + .name = "LRS_PlayPaq_WM8510", + .dai_link = &playpaq_wm8510_dai, + .num_links = 1, +}; + + + +static struct wm8510_setup_data playpaq_wm8510_setup = { + .i2c_bus = 0, + .i2c_address = 0x1a, +}; + + + +static struct snd_soc_device playpaq_wm8510_snd_devdata = { + .machine = &snd_soc_machine_playpaq, + .platform = &at32_soc_platform, + .codec_dev = &soc_codec_dev_wm8510, + .codec_data = &playpaq_wm8510_setup, +}; + +static struct platform_device *playpaq_snd_device; + + +static int __init playpaq_asoc_init(void) +{ + int ret = 0; + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + goto err_ssc; + } + ssc_p->ssc = ssc; + + + /* + * Configure MCLK for WM8510 + */ + _gclk0 = clk_get(NULL, "gclk0"); + if (IS_ERR(_gclk0)) { + _gclk0 = NULL; + goto err_gclk0; + } + _pll0 = clk_get(NULL, "pll0"); + if (IS_ERR(_pll0)) { + _pll0 = NULL; + goto err_pll0; + } + if (clk_set_parent(_gclk0, _pll0)) { + pr_warning("snd-soc-playpaq: " + "Failed to set PLL0 as parent for DAC clock\n"); + goto err_set_clk; + } + clk_set_rate(CODEC_CLK, 12000000); + clk_enable(CODEC_CLK); + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); +#endif + + + /* + * Create and register platform device + */ + playpaq_snd_device = platform_device_alloc("soc-audio", 0); + if (playpaq_snd_device == NULL) { + ret = -ENOMEM; + goto err_device_alloc; + } + + platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); + playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; + + ret = platform_device_add(playpaq_snd_device); + if (ret) { + pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", + ret); + goto err_device_add; + } + + return 0; + + +err_device_add: + if (playpaq_snd_device != NULL) { + platform_device_put(playpaq_snd_device); + playpaq_snd_device = NULL; + } +err_device_alloc: +err_set_clk: + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } +err_pll0: + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } +err_gclk0: + ssc_free(ssc); +err_ssc: + return ret; +} + + +static void __exit playpaq_asoc_exit(void) +{ + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_free_pin(MCLK_PIN); +#endif + + platform_device_unregister(playpaq_snd_device); + playpaq_snd_device = NULL; +} + +module_init(playpaq_asoc_init); +module_exit(playpaq_asoc_exit); + +MODULE_AUTHOR("Geoffrey Wossum "); +MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 5b99e6ccf964e733f0afe2b7bd09559a51a540ca Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou Date: Fri, 3 Oct 2008 16:58:58 +0200 Subject: ASoC: Add audio support for the Atmel AT91SAM9G20ek board(uing wolfson 8731). Add audio support for the Atmel AT91SAM9G20ek board(uing wolfson 8731). It is based on the former eti_b1_wm8731.c file, using the atmel scc API. Signed-off-by: Sedji Gaouaou Signed-off-by: Mark Brown --- sound/soc/atmel/sam9g20_wm8731.c | 329 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 329 insertions(+) create mode 100644 sound/soc/atmel/sam9g20_wm8731.c (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c new file mode 100644 index 00000000000..4e191df4e2b --- /dev/null +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -0,0 +1,329 @@ +/* + * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based + * ATMEL AT91SAM9G20ek board. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou + * + * Based on ati_b1_wm8731.c by: + * Frank Mandarino + * Copyright 2006 Endrelia Technologies Inc. + * Based on corgi.c by: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include "../codecs/wm8731.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + int ret; + + /* codec system clock is supplied by PCK0, set to 12MHz */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, + 12000000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + + dev_dbg(rtd->socdev->dev, "shutdown"); +} + +static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct atmel_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + int ret; + + unsigned int rate; + int cmr_div, period; + + if (ssc == NULL) { + printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* + * The SSC clock dividers depend on the sample rate. The CMR.DIV + * field divides the system master clock MCK to drive the SSC TK + * signal which provides the codec BCLK. The TCMR.PERIOD and + * RCMR.PERIOD fields further divide the BCLK signal to drive + * the SSC TF and RF signals which provide the codec DACLRC and + * ADCLRC clocks. + * + * The dividers were determined through trial and error, where a + * CMR.DIV value is chosen such that the resulting BCLK value is + * divisible, or almost divisible, by (2 * sample rate), and then + * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1. + */ + rate = params_rate(params); + + switch (rate) { + case 8000: + cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */ + period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */ + break; + case 11025: + cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */ + period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */ + break; + case 16000: + cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */ + period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */ + break; + case 22050: + cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */ + period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */ + break; + case 32000: + cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */ + period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */ + break; + case 44100: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */ + break; + case 48000: + cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */ + period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */ + break; + case 88200: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */ + break; + case 96000: + cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */ + period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */ + break; + default: + printk(KERN_WARNING "unsupported rate %d" + " on at91sam9g20ek board\n", rate); + return -EINVAL; + } + + /* set the MCK divider for BCLK */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div); + if (ret < 0) + return ret; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* set the BCLK divider for DACLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_TCMR_PERIOD, period); + } else { + /* set the BCLK divider for ADCLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_RCMR_PERIOD, period); + } + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops at91sam9g20ek_ops = { + .startup = at91sam9g20ek_startup, + .hw_params = at91sam9g20ek_hw_params, + .shutdown = at91sam9g20ek_shutdown, +}; + + +static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static const struct snd_soc_dapm_route intercon[] = { + + /* speaker connected to LHPOUT */ + {"Ext Spk", NULL, "LHPOUT"}, + + /* mic is connected to Mic Jack, with WM8731 Mic Bias */ + {"MICIN", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Int Mic"}, +}; + +/* + * Logic for a wm8731 as connected on a at91sam9g20ek board. + */ +static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec) +{ + printk(KERN_DEBUG + "at91sam9g20ek_wm8731 " + ": at91sam9g20ek_wm8731_init() called\n"); + + /* Add specific widgets */ + snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets, + ARRAY_SIZE(at91sam9g20ek_dapm_widgets)); + /* Set up specific audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + /* not connected */ + snd_soc_dapm_disable_pin(codec, "RLINEIN"); + snd_soc_dapm_disable_pin(codec, "LLINEIN"); + + /* always connected */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link at91sam9g20ek_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai = &atmel_ssc_dai[0], + .codec_dai = &wm8731_dai, + .init = at91sam9g20ek_wm8731_init, + .ops = &at91sam9g20ek_ops, +}; + +static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { + .name = "WM8731", + .dai_link = &at91sam9g20ek_dai, + .num_links = 1, +}; + +static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { + .i2c_bus = 0, + .i2c_address = 0x1b, +}; + +static struct snd_soc_device at91sam9g20ek_snd_devdata = { + .machine = &snd_soc_machine_at91sam9g20ek, + .platform = &atmel_soc_platform, + .codec_dev = &soc_codec_dev_wm8731, + .codec_data = &at91sam9g20ek_wm8731_setup, +}; + +static struct platform_device *at91sam9g20ek_snd_device; + +static int __init at91sam9g20ek_init(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + int ret; + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); + if (!at91sam9g20ek_snd_device) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + ret = -ENOMEM; + } + + platform_set_drvdata(at91sam9g20ek_snd_device, + &at91sam9g20ek_snd_devdata); + at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev; + + ret = platform_device_add(at91sam9g20ek_snd_device); + if (ret) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + platform_device_put(at91sam9g20ek_snd_device); + } + + return ret; + +err_ssc: + return ret; +} + +static void __exit at91sam9g20ek_exit(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + platform_device_unregister(at91sam9g20ek_snd_device); + at91sam9g20ek_snd_device = NULL; +} + +module_init(at91sam9g20ek_init); +module_exit(at91sam9g20ek_exit); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou "); +MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 0ee4663617fb0f78cec4cc6558a096ccbd8c3ffc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 4 Nov 2008 18:06:23 +0100 Subject: ALSA: ASoC - Remove unnecessary inclusion of linux/version.h Signed-off-by: Takashi Iwai --- sound/soc/atmel/playpaq_wm8510.c | 1 - sound/soc/atmel/sam9g20_wm8731.c | 1 - 2 files changed, 2 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index 5b07cf7ea4e..ea7935d2a66 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -22,7 +22,6 @@ #include #include -#include #include #include #include diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index 4e191df4e2b..710addcc66b 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -31,7 +31,6 @@ #include #include -#include #include #include #include -- cgit v1.2.3 From 875065491fba8eb13219f16c36e79a6fb4e15c68 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 18 Nov 2008 20:50:34 +0000 Subject: ASoC: Rename snd_soc_card to snd_soc_machine One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: Mark Brown --- sound/soc/atmel/playpaq_wm8510.c | 4 ++-- sound/soc/atmel/sam9g20_wm8731.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index ea7935d2a66..d40b5a52a8d 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -361,7 +361,7 @@ static struct snd_soc_dai_link playpaq_wm8510_dai = { -static struct snd_soc_machine snd_soc_machine_playpaq = { +static struct snd_soc_card snd_soc_playpaq = { .name = "LRS_PlayPaq_WM8510", .dai_link = &playpaq_wm8510_dai, .num_links = 1, @@ -377,7 +377,7 @@ static struct wm8510_setup_data playpaq_wm8510_setup = { static struct snd_soc_device playpaq_wm8510_snd_devdata = { - .machine = &snd_soc_machine_playpaq, + .card = &snd_soc_playpaq, .platform = &at32_soc_platform, .codec_dev = &soc_codec_dev_wm8510, .codec_data = &playpaq_wm8510_setup, diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index 710addcc66b..fdc1d0206e0 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -242,7 +242,7 @@ static struct snd_soc_dai_link at91sam9g20ek_dai = { .ops = &at91sam9g20ek_ops, }; -static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { +static struct snd_soc_card snd_soc_at91sam9g20ek = { .name = "WM8731", .dai_link = &at91sam9g20ek_dai, .num_links = 1, @@ -254,7 +254,7 @@ static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { }; static struct snd_soc_device at91sam9g20ek_snd_devdata = { - .machine = &snd_soc_machine_at91sam9g20ek, + .card = &snd_soc_at91sam9g20ek, .platform = &atmel_soc_platform, .codec_dev = &soc_codec_dev_wm8731, .codec_data = &at91sam9g20ek_wm8731_setup, -- cgit v1.2.3 From dee89c4d94433520e4e3977ae203d4cfbfe385fb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 18 Nov 2008 22:11:38 +0000 Subject: ASoC: Merge snd_soc_ops into snd_soc_dai_ops Liam Girdwood's ASoC v2 work avoids having two different ops structures for DAIs by merging the members of struct snd_soc_ops into struct snd_soc_dai_ops, allowing per DAI configuration for everything. Backport this change. This paves the way for future work allowing any combination of DAIs to be connected rather than having fixed purpose CODEC and CPU DAIs and only allowing CODEC<->CPU interconnections. Signed-off-by: Mark Brown --- sound/soc/atmel/atmel_ssc_dai.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index d290b789491..916f73b9a18 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -202,7 +202,8 @@ static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) /* * Startup. Only that one substream allowed in each direction. */ -static int atmel_ssc_startup(struct snd_pcm_substream *substream) +static int atmel_ssc_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; @@ -231,7 +232,8 @@ static int atmel_ssc_startup(struct snd_pcm_substream *substream) * Shutdown. Clear DMA parameters and shutdown the SSC if there * are no other substreams open. */ -static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; @@ -332,7 +334,8 @@ static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, * Configure the SSC. */ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); int id = rtd->dai->cpu_dai->id; @@ -600,7 +603,8 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, } -static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +static int atmel_ssc_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) { struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; @@ -715,8 +719,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .startup = atmel_ssc_startup, .shutdown = atmel_ssc_shutdown, .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params,}, - .dai_ops = { + .hw_params = atmel_ssc_hw_params, .set_fmt = atmel_ssc_set_dai_fmt, .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, .private_data = &ssc_info[0], @@ -741,8 +744,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .startup = atmel_ssc_startup, .shutdown = atmel_ssc_shutdown, .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params,}, - .dai_ops = { + .hw_params = atmel_ssc_hw_params, .set_fmt = atmel_ssc_set_dai_fmt, .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, .private_data = &ssc_info[1], @@ -766,8 +768,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { .startup = atmel_ssc_startup, .shutdown = atmel_ssc_shutdown, .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params,}, - .dai_ops = { + .hw_params = atmel_ssc_hw_params, .set_fmt = atmel_ssc_set_dai_fmt, .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, .private_data = &ssc_info[2], -- cgit v1.2.3 From 3ba9e10a6d3b6abf5f5952572cff8f8d5a35ae54 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 24 Nov 2008 18:01:05 +0000 Subject: ASoC: Remove DAI type information DAI type information is only ever used within ASoC in order to special case AC97 and for diagnostic purposes. Since modern CPUs and codecs support multi function DAIs which can be configured for several modes it is more trouble than it's worth to maintain anything other than a flag identifying AC97 DAIs so remove the type field and replace it with an ac97_control flag. Signed-off-by: Mark Brown --- sound/soc/atmel/atmel_ssc_dai.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 916f73b9a18..0bb18dfa949 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -702,7 +702,6 @@ static int atmel_ssc_resume(struct platform_device *pdev, struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { { .name = "atmel-ssc0", .id = 0, - .type = SND_SOC_DAI_PCM, .suspend = atmel_ssc_suspend, .resume = atmel_ssc_resume, .playback = { @@ -727,7 +726,6 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { #if NUM_SSC_DEVICES == 3 { .name = "atmel-ssc1", .id = 1, - .type = SND_SOC_DAI_PCM, .suspend = atmel_ssc_suspend, .resume = atmel_ssc_resume, .playback = { @@ -751,7 +749,6 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { }, { .name = "atmel-ssc2", .id = 2, - .type = SND_SOC_DAI_PCM, .suspend = atmel_ssc_suspend, .resume = atmel_ssc_resume, .playback = { -- cgit v1.2.3 From 87689d567a45f80416feea0a2aa6d3a2a6b8963a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 2 Dec 2008 16:01:14 +0000 Subject: ASoC: Push platform registration down into the card As part of the deprecation of snd_soc_device push the registration of the platform down into the card structure. Signed-off-by: Mark Brown --- sound/soc/atmel/playpaq_wm8510.c | 2 +- sound/soc/atmel/sam9g20_wm8731.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index d40b5a52a8d..43dd8cee83c 100644 --- a/sound/soc/atmel/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -363,6 +363,7 @@ static struct snd_soc_dai_link playpaq_wm8510_dai = { static struct snd_soc_card snd_soc_playpaq = { .name = "LRS_PlayPaq_WM8510", + .platform = &at32_soc_platform, .dai_link = &playpaq_wm8510_dai, .num_links = 1, }; @@ -378,7 +379,6 @@ static struct wm8510_setup_data playpaq_wm8510_setup = { static struct snd_soc_device playpaq_wm8510_snd_devdata = { .card = &snd_soc_playpaq, - .platform = &at32_soc_platform, .codec_dev = &soc_codec_dev_wm8510, .codec_data = &playpaq_wm8510_setup, }; diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index fdc1d0206e0..1fb59a9d371 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -244,6 +244,7 @@ static struct snd_soc_dai_link at91sam9g20ek_dai = { static struct snd_soc_card snd_soc_at91sam9g20ek = { .name = "WM8731", + .platform = &atmel_soc_platform, .dai_link = &at91sam9g20ek_dai, .num_links = 1, }; @@ -255,7 +256,6 @@ static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { static struct snd_soc_device at91sam9g20ek_snd_devdata = { .card = &snd_soc_at91sam9g20ek, - .platform = &atmel_soc_platform, .codec_dev = &soc_codec_dev_wm8731, .codec_data = &at91sam9g20ek_wm8731_setup, }; -- cgit v1.2.3 From 07c84d0409f3551b79d676630d8ee76bb551598d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 3 Dec 2008 18:17:28 +0000 Subject: ASoC: Remove device from platform suspend and resume operations None of the platforms are actually using the SoC device so remove it (only atmel actually has a suspend method). Signed-off-by: Mark Brown --- sound/soc/atmel/atmel-pcm.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index 394412fb396..8507aa1cd81 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -417,8 +417,7 @@ static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) } #ifdef CONFIG_PM -static int atmel_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) +static int atmel_pcm_suspend(struct snd_soc_dai *dai) { struct snd_pcm_runtime *runtime = dai->runtime; struct atmel_runtime_data *prtd; @@ -442,8 +441,7 @@ static int atmel_pcm_suspend(struct platform_device *pdev, return 0; } -static int atmel_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) +static int atmel_pcm_resume(struct snd_soc_dai *dai) { struct snd_pcm_runtime *runtime = dai->runtime; struct atmel_runtime_data *prtd; -- cgit v1.2.3 From dc7d7b830ee1f4111696e73d1c25da683b461548 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 3 Dec 2008 18:21:52 +0000 Subject: ASoC: Remove platform device from DAI suspend and resume operations None of the DAIs use it except s3c2412-i2s which only uses it for dev_() printouts. Signed-off-by: Mark Brown --- sound/soc/atmel/atmel_ssc_dai.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 0bb18dfa949..d9b874c5bf3 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -628,8 +628,7 @@ static int atmel_ssc_prepare(struct snd_pcm_substream *substream, #ifdef CONFIG_PM -static int atmel_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) +static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) { struct atmel_ssc_info *ssc_p; @@ -657,8 +656,7 @@ static int atmel_ssc_suspend(struct platform_device *pdev, -static int atmel_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) +static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) { struct atmel_ssc_info *ssc_p; u32 cr; -- cgit v1.2.3 From 3f4b783cfdebb559814690572041a17bc9744cf3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 3 Dec 2008 19:26:35 +0000 Subject: ASoC: Register platform DAIs Register all platform DAIs with the core. In line with current behaviour this is done at module probe time rather than when the devices are probed (since currently that only happens as the entire ASoC card is registered except for those drivers that currently implement some kind of hotplug). Since the core currently ignores DAI registration this has no practical effect. Signed-off-by: Mark Brown --- sound/soc/atmel/atmel_ssc_dai.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index d9b874c5bf3..c9f02edd730 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -772,6 +772,17 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { }; EXPORT_SYMBOL_GPL(atmel_ssc_dai); +static int __devinit atmel_ssc_modinit(void) +{ + return snd_soc_register_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai)); +} +module_init(snd_soc_init); + +static void __exit snd_soc_exit(void) +{ + snd_soc_unregister_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai)); +} + /* Module information */ MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); -- cgit v1.2.3 From 958e792c7c8f06a9e666adb0ed94fff2cf90156f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 3 Dec 2008 19:58:17 +0000 Subject: ASoC: Register platform drivers This is done at modprobe time, mirroring current behaviour, except for mpc5200_psc_i2s where we do registration at the same time as we register with soc-of-simple. Since the core currently ignores registration this has no practical impact. Signed-off-by: Mark Brown --- sound/soc/atmel/atmel-pcm.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index 8507aa1cd81..d6bcb4e6fda 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -477,6 +477,18 @@ struct snd_soc_platform atmel_soc_platform = { }; EXPORT_SYMBOL_GPL(atmel_soc_platform); +static int __devinit atmel_pcm_modinit(void) +{ + return snd_soc_register_platform(&atmel_soc_platform); +} +module_init(atmel_pcm_modinit); + +static void __exit atmel_pcm_exit(void) +{ + snd_soc_unregister_platform(&atmel_soc_platform); +} +module_exit(atmel_pcm_modexit); + MODULE_AUTHOR("Sedji Gaouaou "); MODULE_DESCRIPTION("Atmel PCM module"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 471716f7ea646487b7b5c7b3efc68a023b05a933 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 9 Dec 2008 14:47:07 +0000 Subject: ASoC: Fix typos in Atmel module registration I wish I had boards which work with unmodified kernels :/ Signed-off-by: Mark Brown --- sound/soc/atmel/atmel-pcm.c | 2 +- sound/soc/atmel/atmel_ssc_dai.c | 5 +++-- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index d6bcb4e6fda..027eb13f9dd 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -483,7 +483,7 @@ static int __devinit atmel_pcm_modinit(void) } module_init(atmel_pcm_modinit); -static void __exit atmel_pcm_exit(void) +static void __exit atmel_pcm_modexit(void) { snd_soc_unregister_platform(&atmel_soc_platform); } diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index c9f02edd730..87904b6ab8c 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -776,12 +776,13 @@ static int __devinit atmel_ssc_modinit(void) { return snd_soc_register_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai)); } -module_init(snd_soc_init); +module_init(atmel_ssc_modinit); -static void __exit snd_soc_exit(void) +static void __exit atmel_ssc_modexit(void) { snd_soc_unregister_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai)); } +module_exit(atmel_ssc_modexit); /* Module information */ MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); -- cgit v1.2.3 From c9b3a40ff2b3dea9914e36965a17c802650bb603 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 10 Dec 2008 07:47:22 +0100 Subject: ALSA: ASoC - Fix wrong section types The module init entries should be __init instead of __devinit. Signed-off-by: Takashi Iwai --- sound/soc/atmel/atmel-pcm.c | 2 +- sound/soc/atmel/atmel_ssc_dai.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'sound/soc/atmel') diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index 027eb13f9dd..1fac5efd285 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -477,7 +477,7 @@ struct snd_soc_platform atmel_soc_platform = { }; EXPORT_SYMBOL_GPL(atmel_soc_platform); -static int __devinit atmel_pcm_modinit(void) +static int __init atmel_pcm_modinit(void) { return snd_soc_register_platform(&atmel_soc_platform); } diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c index 87904b6ab8c..c5d67900d66 100644 --- a/sound/soc/atmel/atmel_ssc_dai.c +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -772,7 +772,7 @@ struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { }; EXPORT_SYMBOL_GPL(atmel_ssc_dai); -static int __devinit atmel_ssc_modinit(void) +static int __init atmel_ssc_modinit(void) { return snd_soc_register_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai)); } -- cgit v1.2.3