From 5a2cc50f166babc26103279c4fbc9f2bf73b79de Mon Sep 17 00:00:00 2001
From: eric miao <eric.y.miao@gmail.com>
Date: Mon, 26 May 2008 03:28:09 +0100
Subject: [ARM] 5063/1: pxa: add clk support for pxa2xx I2S

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 sound/soc/pxa/pxa2xx-i2s.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'sound/soc')

diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 42507103097..e130346732b 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
@@ -40,6 +41,7 @@ struct pxa_i2s_port {
 	u32 fmt;
 };
 static struct pxa_i2s_port pxa_i2s;
+static struct clk *clk_i2s;
 
 static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = {
 	.name			= "I2S PCM Stereo out",
@@ -82,6 +84,10 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
 
+	clk_i2s = clk_get(NULL, "I2SCLK");
+	if (IS_ERR(clk_i2s))
+		return PTR_ERR(clk_i2s);
+
 	if (!cpu_dai->active) {
 		SACR0 |= SACR0_RST;
 		SACR0 = 0;
@@ -149,7 +155,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
-	pxa_set_cken(CKEN_I2S, 1);
+	clk_enable(clk_i2s);
 	pxa_i2s_wait();
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -234,8 +240,10 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream)
 	if (SACR1 & (SACR1_DREC | SACR1_DRPL)) {
 		SACR0 &= ~SACR0_ENB;
 		pxa_i2s_wait();
-		pxa_set_cken(CKEN_I2S, 0);
+		clk_disable(clk_i2s);
 	}
+
+	clk_put(clk_i2s);
 }
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.3


From 613526677a74c2b3d1b1696ea7334b2cf35155b3 Mon Sep 17 00:00:00 2001
From: sedji gaouaou <sedji.gaouaou@atmel.com>
Date: Thu, 10 Jul 2008 10:15:35 +0100
Subject: [ARM] 5130/4: Support for the at91sam9g20

Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.

AT91sam9g20 is an evolution of the at91sam9260 with a faster clock
speed.
We created a new board for this device but based the chip support
directly on 9260 files with little updates.
Here is the chip page on Atmel wabsite:
http://atmel.com/dyn/products/product_card.asp?part_id=4337

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 sound/soc/at91/at91-ssc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'sound/soc')

diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c
index bc35d00a38f..1a426095014 100644
--- a/sound/soc/at91/at91-ssc.c
+++ b/sound/soc/at91/at91-ssc.c
@@ -41,7 +41,7 @@
 #define	DBG(x...)
 #endif
 
-#if defined(CONFIG_ARCH_AT91SAM9260)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #define NUM_SSC_DEVICES		1
 #else
 #define NUM_SSC_DEVICES		3
-- 
cgit v1.2.3