/* * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c * * Marvell Orion-VoIP GE Reference Design Setup * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/pci.h> #include <linux/irq.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/leds.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> #include "common.h" #include "mpp.h" /***************************************************************************** * RD-88F5181L GE Info ****************************************************************************/ /* * 16M NOR flash Device bus boot chip select */ #define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000 #define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M /***************************************************************************** * 16M NOR Flash on Device bus Boot chip select ****************************************************************************/ static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = { .width = 1, }; static struct resource rd88f5181l_ge_nor_boot_flash_resource = { .flags = IORESOURCE_MEM, .start = RD88F5181L_GE_NOR_BOOT_BASE, .end = RD88F5181L_GE_NOR_BOOT_BASE + RD88F5181L_GE_NOR_BOOT_SIZE - 1, }; static struct platform_device rd88f5181l_ge_nor_boot_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &rd88f5181l_ge_nor_boot_flash_data, }, .num_resources = 1, .resource = &rd88f5181l_ge_nor_boot_flash_resource, }; /***************************************************************************** * General Setup ****************************************************************************/ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = { { 0, MPP_GPIO }, /* LED1 */ { 1, MPP_GPIO }, /* LED5 */ { 2, MPP_GPIO }, /* LED4 */ { 3, MPP_GPIO }, /* LED3 */ { 4, MPP_GPIO }, /* PCI_intA */ { 5, MPP_GPIO }, /* RTC interrupt */ { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ { 8, MPP_GPIO }, /* 88e6131 interrupt */ { 9, MPP_GPIO }, /* GE_RXERR */ { 10, MPP_GPIO }, /* PCI_intB */ { 11, MPP_GPIO }, /* LED2 */ { 12, MPP_GIGE }, /* GE_TXD[4] */ { 13, MPP_GIGE }, /* GE_TXD[5] */ { 14, MPP_GIGE }, /* GE_TXD[6] */ { 15, MPP_GIGE }, /* GE_TXD[7] */ { 16, MPP_GIGE }, /* GE_RXD[4] */ { 17, MPP_GIGE }, /* GE_RXD[5] */ { 18, MPP_GIGE }, /* GE_RXD[6] */ { 19, MPP_GIGE }, /* GE_RXD[7] */ { -1 }, }; static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { .phy_addr = -1, .speed = SPEED_1000, .duplex = DUPLEX_FULL, }; static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { I2C_BOARD_INFO("ds1338", 0x68), }; static void __init rd88f5181l_ge_init(void) { /* * Setup basic Orion functions. Need to be called early. */ orion5x_init(); orion5x_mpp_conf(rd88f5181l_ge_mpp_modes); /* * Configure peripherals. */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_ge_eth_data); orion5x_i2c_init(); orion5x_uart0_init(); orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE, RD88F5181L_GE_NOR_BOOT_SIZE); platform_device_register(&rd88f5181l_ge_nor_boot_flash); i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1); } static int __init rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; /* * Check for devices with hard-wired IRQs. */ irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; /* * Cardbus slot. */ if (pin == 1) return gpio_to_irq(4); else return gpio_to_irq(10); } static struct hw_pci rd88f5181l_ge_pci __initdata = { .nr_controllers = 2, .swizzle = pci_std_swizzle, .setup = orion5x_pci_sys_setup, .scan = orion5x_pci_sys_scan_bus, .map_irq = rd88f5181l_ge_pci_map_irq, }; static int __init rd88f5181l_ge_pci_init(void) { if (machine_is_rd88f5181l_ge()) { orion5x_pci_set_cardbus_mode(); pci_common_init(&rd88f5181l_ge_pci); } return 0; } subsys_initcall(rd88f5181l_ge_pci_init); MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ .phys_io = ORION5X_REGS_PHYS_BASE, .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5181l_ge_init, .map_io = orion5x_map_io, .init_irq = orion5x_init_irq, .timer = &orion5x_timer, .fixup = tag_fixup_mem32, MACHINE_END