/* * CM5200 board Device Tree Source * * Copyright (C) 2007 Semihalf * Marian Balakowicz <m8@semihalf.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ /dts-v1/; / { model = "schindler,cm5200"; compatible = "schindler,cm5200"; #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,5200@0 { device_type = "cpu"; reg = <0>; d-cache-line-size = <32>; i-cache-line-size = <32>; d-cache-size = <0x4000>; // L1, 16K i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader }; }; memory { device_type = "memory"; reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; ranges = <0 0xf0000000 0x0000c000>; reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x610 0x10>; interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x620 0x10>; interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x630 0x10>; interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x640 0x10>; interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x650 0x10>; interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x660 0x10>; interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x670 0x10>; interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; serial@2200 { // PSC2 device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <1>; // Logical port assignment reg = <0x2200 0x100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; serial@2400 { // PSC3 device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <2>; // Logical port assignment reg = <0x2400 0x100>; interrupts = <2 3 0>; interrupt-parent = <&mpc5200_pic>; }; serial@2c00 { // PSC6 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <5>; // Logical port assignment reg = <0x2c00 0x100>; interrupts = <2 4 0>; interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { device_type = "ethernet-phy"; reg = <0>; }; }; i2c@3d40 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; lpb { model = "fsl,lpb"; compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x2000000>; // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { compatible = "cfi-flash"; reg = <0 0 0x2000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; #address-cells = <1>; }; }; };