/* * Board and PCI setup routines for MCG PowerPlus * * Author: Randy Vinson * * Derived from original PowerPlus PReP work by * Cort Dougan, Johnnie Peters, Matt Porter, and * Troy Benjegerdes. * * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pplus.h" #undef DUMP_DBATS TODC_ALLOC(); extern void pplus_setup_hose(void); extern void pplus_set_VIA_IDE_native(void); extern unsigned long loops_per_jiffy; unsigned char *Motherboard_map_name; /* Tables for known hardware */ /* Motorola Mesquite */ static inline int mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { static char pci_irq_table[][4] = /* * MPIC interrupts for various IDSEL values (MPIC IRQ0 = * Linux IRQ16 (to leave room for ISA IRQs at 0-15). * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */ { 0, 0, 0, 0}, /* IDSEL 15 - unused */ {19, 19, 19, 19}, /* IDSEL 16 - PMC Slot 1 */ { 0, 0, 0, 0}, /* IDSEL 17 - unused */ { 0, 0, 0, 0}, /* IDSEL 18 - unused */ { 0, 0, 0, 0}, /* IDSEL 19 - unused */ {24, 25, 26, 27}, /* IDSEL 20 - P2P bridge (to cPCI 1) */ { 0, 0, 0, 0}, /* IDSEL 21 - unused */ {28, 29, 30, 31} /* IDSEL 22 - P2P bridge (to cPCI 2) */ }; const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } /* Motorola Sitka */ static inline int sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { static char pci_irq_table[][4] = /* * MPIC interrupts for various IDSEL values (MPIC IRQ0 = * Linux IRQ16 (to leave room for ISA IRQs at 0-15). * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */ { 0, 0, 0, 0}, /* IDSEL 15 - unused */ {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */ {28, 25, 26, 27}, /* IDSEL 17 - PMC Slot 2 */ { 0, 0, 0, 0}, /* IDSEL 18 - unused */ { 0, 0, 0, 0}, /* IDSEL 19 - unused */ {20, 0, 0, 0} /* IDSEL 20 - P2P bridge (to cPCI) */ }; const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } /* Motorola MTX */ static inline int MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { static char pci_irq_table[][4] = /* * MPIC interrupts for various IDSEL values (MPIC IRQ0 = * Linux IRQ16 (to leave room for ISA IRQs at 0-15). * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ { 0, 0, 0, 0}, /* IDSEL 13 - unused */ {18, 0, 0, 0}, /* IDSEL 14 - Enet */ { 0, 0, 0, 0}, /* IDSEL 15 - unused */ {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */ {26, 27, 28, 25}, /* IDSEL 17 - PMC Slot 2 */ {27, 28, 25, 26} /* IDSEL 18 - PCI Slot 3 */ }; const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } /* Motorola MTX Plus */ /* Secondary bus interrupt routing is not supported yet */ static inline int MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { static char pci_irq_table[][4] = /* * MPIC interrupts for various IDSEL values (MPIC IRQ0 = * Linux IRQ16 (to leave room for ISA IRQs at 0-15). * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ { 0, 0, 0, 0}, /* IDSEL 13 - unused */ {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */ { 0, 0, 0, 0}, /* IDSEL 15 - unused */ {25, 26, 27, 28}, /* IDSEL 16 - PCI Slot 1P */ {26, 27, 28, 25}, /* IDSEL 17 - PCI Slot 2P */ {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */ {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */ { 0, 0, 0, 0} /* IDSEL 20 - P2P Bridge */ }; const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } static inline int Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { /* 2600 * Raven 31 * ISA 11 * SCSI 12 - IRQ3 * Univ 13 * eth 14 - IRQ2 * VGA 15 - IRQ4 * PMC1 16 - IRQ9,10,11,12 = PMC1 A-D * PMC2 17 - IRQ12,9,10,11 = A-D * SCSI2 18 - IRQ11 * eth2 19 - IRQ10 * PCIX 20 - IRQ9,10,11,12 = PCI A-D */ /* 2400 * Hawk 31 * ISA 11 * Univ 13 * eth 14 - IRQ2 * PMC1 16 - IRQ9,10,11,12 = PMC A-D * PMC2 17 - IRQ12,9,10,11 = PMC A-D * PCIX 20 - IRQ9,10,11,12 = PMC A-D */ /* 2300 * Raven 31 * ISA 11 * Univ 13 * eth 14 - IRQ2 * PMC1 16 - 9,10,11,12 = A-D * PMC2 17 - 9,10,11,12 = B,C,D,A */ static char pci_irq_table[][4] = /* * MPIC interrupts for various IDSEL values (MPIC IRQ0 = * Linux IRQ16 (to leave room for ISA IRQs at 0-15). * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ { 0, 0, 0, 0}, /* IDSEL 13 - Universe PCI - VME */ {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */ { 0, 0, 0, 0}, /* IDSEL 15 - unused */ {25, 26, 27, 28}, /* IDSEL 16 - PCI/PMC Slot 1P */ {28, 25, 26, 27}, /* IDSEL 17 - PCI/PMC Slot 2P */ {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */ {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */ {25, 26, 27, 28} /* IDSEL 20 - P2P Bridge */ }; const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } #define MOTOROLA_CPUTYPE_REG 0x800 #define MOTOROLA_BASETYPE_REG 0x803 #define MPIC_RAVEN_ID 0x48010000 #define MPIC_HAWK_ID 0x48030000 #define MOT_PROC2_BIT 0x800 static u_char pplus_openpic_initsenses[] __initdata = { (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */ (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), }; int mot_entry = -1; int prep_keybd_present = 1; int mot_multi = 0; struct brd_info { /* 0x100 mask assumes for Raven and Hawk boards that the level/edge * are set */ int cpu_type; /* 0x200 if this board has a Hawk chip. */ int base_type; /* or'ed with 0x80 if this board should be checked for multi CPU */ int max_cpu; const char *name; int (*map_irq) (struct pci_dev *, unsigned char, unsigned char); }; struct brd_info mot_info[] = { {0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq}, {0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq}, {0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq}, {0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq}, {0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq}, {0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq}, {0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq}, {0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq}, {0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq}, {0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq}, {0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq}, {0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq}, {0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq}, {0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq}, {0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq}, {0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq}, {0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq}, {0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq}, {0x000, 0x00, 0x00, "", NULL} }; void __init pplus_set_board_type(void) { unsigned char cpu_type; unsigned char base_mod; int entry; unsigned short devid; unsigned long *ProcInfo = NULL; cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0; base_mod = inb(MOTOROLA_BASETYPE_REG); early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid); for (entry = 0; mot_info[entry].cpu_type != 0; entry++) { /* Check for Hawk chip */ if (mot_info[entry].cpu_type & 0x200) { if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) continue; } else { /* store the system config register for later use. */ ProcInfo = (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4); /* Check non hawk boards */ if ((mot_info[entry].cpu_type & 0xff) != cpu_type) continue; if (mot_info[entry].base_type == 0) { mot_entry = entry; break; } if (mot_info[entry].base_type != base_mod) continue; } if (!(mot_info[entry].max_cpu & 0x80)) { mot_entry = entry; break; } /* processor 1 not present and max processor zero indicated */ if ((*ProcInfo & MOT_PROC2_BIT) && !(mot_info[entry].max_cpu & 0x7f)) { mot_entry = entry; break; } /* processor 1 present and max processor zero indicated */ if (!(*ProcInfo & MOT_PROC2_BIT) && (mot_info[entry].max_cpu & 0x7f)) { mot_entry = entry; break; } /* Indicate to system if this is a multiprocessor board */ if (!(*ProcInfo & MOT_PROC2_BIT)) mot_multi = 1; } if (mot_entry == -1) /* No particular cpu type found - assume Mesquite (MCP750) */ mot_entry = 1; Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name; ppc_md.pci_map_irq = mot_info[mot_entry].map_irq; } void __init pplus_pib_init(void) { unsigned char reg; unsigned short short_reg; struct pci_dev *dev = NULL; /* * Perform specific configuration for the Via Tech or * or Winbond PCI-ISA-Bridge part. */ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, dev))) { /* * PPCBUG does not set the enable bits * for the IDE device. Force them on here. */ pci_read_config_byte(dev, 0x40, ®); reg |= 0x03; /* IDE: Chip Enable Bits */ pci_write_config_byte(dev, 0x40, reg); } if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev)) && (dev->devfn = 0x5a)) { /* Force correct USB interrupt */ dev->irq = 11; pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); } if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, dev))) { /* Clear PCI Interrupt Routing Control Register. */ short_reg = 0x0000; pci_write_config_word(dev, 0x44, short_reg); /* Route IDE interrupts to IRQ 14 */ reg = 0xEE; pci_write_config_byte(dev, 0x43, reg); } if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, dev))) { /* * Disable LEGIRQ mode so PCI INTS are routed * directly to the 8259 and enable both channels */ pci_write_config_dword(dev, 0x40, 0x10ff0033); /* Force correct IDE interrupt */ dev->irq = 14; pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); } pci_dev_put(dev); } void __init pplus_set_VIA_IDE_legacy(void) { unsigned short vend, dev; early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); if ((vend == PCI_VENDOR_ID_VIA) && (dev == PCI_DEVICE_ID_VIA_82C586_1)) { unsigned char temp; /* put back original "standard" port base addresses */ early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), PCI_BASE_ADDRESS_0, 0x1f1); early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), PCI_BASE_ADDRESS_1, 0x3f5); early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), PCI_BASE_ADDRESS_2, 0x171); early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), PCI_BASE_ADDRESS_3, 0x375); early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), PCI_BASE_ADDRESS_4, 0xcc01); /* put into legacy mode */ early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, &temp); temp &= ~0x05; early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, temp); } } void pplus_set_VIA_IDE_native(void) { unsigned short vend, dev; early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); if ((vend == PCI_VENDOR_ID_VIA) && (dev == PCI_DEVICE_ID_VIA_82C586_1)) { unsigned char temp; /* put into native mode */ early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, &temp); temp |= 0x05; early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, temp); } } void __init pplus_pcibios_fixup(void) { unsigned char reg; unsigned short devid; unsigned char base_mod; printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n", Motherboard_map_name); /* Setup the Winbond or Via PIB */ pplus_pib_init(); /* Set up floppy in PS/2 mode */ outb(0x09, SIO_CONFIG_RA); reg = inb(SIO_CONFIG_RD); reg = (reg & 0x3F) | 0x40; outb(reg, SIO_CONFIG_RD); outb(reg, SIO_CONFIG_RD); /* Have to write twice to change! */ /* This is a hack. If this is a 2300 or 2400 mot board then there is * no keyboard controller and we have to indicate that. */ early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid); base_mod = inb(MOTOROLA_BASETYPE_REG); if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) || (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1)) prep_keybd_present = 0; } void __init pplus_find_bridges(void) { struct pci_controller *hose; hose = pcibios_alloc_controller(); if (!hose) return; hose->first_busno = 0; hose->last_busno = 0xff; hose->pci_mem_offset = PREP_ISA_MEM_BASE; hose->io_base_virt = (void *)PREP_ISA_IO_BASE; pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START, PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge"); pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START, PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM, "PCI host bridge"); hose->io_space.start = PPLUS_PCI_IO_START; hose->io_space.end = PPLUS_PCI_IO_END; hose->mem_space.start = PPLUS_PCI_MEM_START; hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE; if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START, PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE, PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END, PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) { printk(KERN_CRIT "Could not initialize host bridge\n"); } pplus_set_VIA_IDE_legacy(); hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); ppc_md.pcibios_fixup = pplus_pcibios_fixup; ppc_md.pci_swizzle = common_swizzle; } static int pplus_show_cpuinfo(struct seq_file *m) { seq_printf(m, "vendor\t\t: Motorola MCG\n"); seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name); return 0; } static void __init pplus_setup_arch(void) { struct pci_controller *hose; if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: enter", 0); /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000; if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: find_bridges", 0); /* Setup PCI host bridge */ pplus_find_bridges(); hose = pci_bus_to_hose(0); isa_io_base = (ulong) hose->io_base_virt; if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: set_board_type", 0); pplus_set_board_type(); /* Enable L2. Assume we don't need to flush -- Cort */ *(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3; #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; else #endif #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else ROOT_DEV = Root_SDA2; #endif printk(KERN_INFO "Motorola PowerPlus Platform\n"); printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); #ifdef CONFIG_VGA_CONSOLE /* remap the VGA memory */ vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE, 0x08000000); conswitchp = &vga_con; #endif #ifdef CONFIG_PPCBUG_NVRAM /* Read in NVRAM data */ init_prep_nvram(); /* if no bootargs, look in NVRAM */ if (cmd_line[0] == '\0') { char *bootargs; bootargs = prep_nvram_get_var("bootargs"); if (bootargs != NULL) { strcpy(cmd_line, bootargs); /* again.. */ strcpy(boot_command_line, cmd_line); } } #endif if (ppc_md.progress) ppc_md.progress("pplus_setup_arch: exit", 0); } static void pplus_restart(char *cmd) { unsigned long i = 10000; local_irq_disable(); /* set VIA IDE controller into native mode */ pplus_set_VIA_IDE_native(); /* set exception prefix high - to the prom */ _nmask_and_or_msr(0, MSR_IP); /* make sure bit 0 (reset) is a 0 */ outb(inb(0x92) & ~1L, 0x92); /* signal a reset to system control port A - soft reset */ outb(inb(0x92) | 1, 0x92); while (i != 0) i++; panic("restart failed\n"); } static void pplus_halt(void) { /* set exception prefix high - to the prom */ _nmask_and_or_msr(MSR_EE, MSR_IP); /* make sure bit 0 (reset) is a 0 */ outb(inb(0x92) & ~1L, 0x92); /* signal a reset to system control port A - soft reset */ outb(inb(0x92) | 1, 0x92); while (1) ; /* * Not reached */ } static void pplus_power_off(void) { pplus_halt(); } static void __init pplus_init_IRQ(void) { int i; if (ppc_md.progress) ppc_md.progress("init_irq: enter", 0); OpenPIC_InitSenses = pplus_openpic_initsenses; OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses); if (OpenPIC_Addr != NULL) { openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000); openpic_init(NUM_8259_INTERRUPTS); openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", i8259_irq); ppc_md.get_irq = openpic_get_irq; } i8259_init(0, 0); if (ppc_md.progress) ppc_md.progress("init_irq: exit", 0); } #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) /* * IDE stuff. */ static int pplus_ide_default_irq(unsigned long base) { switch (base) { case 0x1f0: return 14; case 0x170: return 15; default: return 0; } } static unsigned long pplus_ide_default_io_base(int index) { switch (index) { case 0: return 0x1f0; case 1: return 0x170; default: return 0; } } #endif #ifdef CONFIG_SMP /* PowerPlus (MTX) support */ static int __init smp_pplus_probe(void) { extern int mot_multi; if (mot_multi) { openpic_request_IPIs(); smp_hw_index[1] = 1; return 2; } return 1; } static void __init smp_pplus_kick_cpu(int nr) { *(unsigned long *)KERNELBASE = nr; asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory"); printk(KERN_INFO "CPU1 reset, waiting\n"); } static void __init smp_pplus_setup_cpu(int cpu_nr) { if (OpenPIC_Addr) do_openpic_setup_cpu(); } static struct smp_ops_t pplus_smp_ops = { smp_openpic_message_pass, smp_pplus_probe, smp_pplus_kick_cpu, smp_pplus_setup_cpu, .give_timebase = smp_generic_give_timebase, .take_timebase = smp_generic_take_timebase, }; #endif /* CONFIG_SMP */ #ifdef DUMP_DBATS static void print_dbat(int idx, u32 bat) { char str[64]; sprintf(str, "DBAT%c%c = 0x%08x\n", (char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat); ppc_md.progress(str, 0); } #define DUMP_DBAT(x) \ do { \ u32 __temp = mfspr(x);\ print_dbat(x, __temp); \ } while (0) static void dump_dbats(void) { if (ppc_md.progress) { DUMP_DBAT(DBAT0U); DUMP_DBAT(DBAT0L); DUMP_DBAT(DBAT1U); DUMP_DBAT(DBAT1L); DUMP_DBAT(DBAT2U); DUMP_DBAT(DBAT2L); DUMP_DBAT(DBAT3U); DUMP_DBAT(DBAT3L); } } #endif static unsigned long __init pplus_find_end_of_memory(void) { unsigned long total; if (ppc_md.progress) ppc_md.progress("pplus_find_end_of_memory", 0); #ifdef DUMP_DBATS dump_dbats(); #endif total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE); return (total); } static void __init pplus_map_io(void) { io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000, _PAGE_IO); io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO); } static void __init pplus_init2(void) { #ifdef CONFIG_NVRAM request_region(PREP_NVRAM_AS0, 0x8, "nvram"); #endif request_region(0x20, 0x20, "pic1"); request_region(0xa0, 0x20, "pic2"); request_region(0x00, 0x20, "dma1"); request_region(0x40, 0x20, "timer"); request_region(0x80, 0x10, "dma page reg"); request_region(0xc0, 0x20, "dma2"); } /* * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3 * to 0xf0000000 to access Falcon/Raven or Hawk registers */ static __inline__ void pplus_set_bat(void) { /* wait for all outstanding memory accesses to complete */ mb(); /* setup DBATs */ mtspr(SPRN_DBAT2U, 0x80001ffe); mtspr(SPRN_DBAT2L, 0x8000002a); mtspr(SPRN_DBAT3U, 0xf0001ffe); mtspr(SPRN_DBAT3L, 0xf000002a); /* wait for updates */ mb(); } void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { parse_bootinfo(find_bootinfo()); /* Map in board regs, etc. */ pplus_set_bat(); isa_io_base = PREP_ISA_IO_BASE; isa_mem_base = PREP_ISA_MEM_BASE; pci_dram_offset = PREP_PCI_DRAM_OFFSET; ISA_DMA_THRESHOLD = 0x00ffffff; DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; ppc_do_canonicalize_irqs = 1; ppc_md.setup_arch = pplus_setup_arch; ppc_md.show_cpuinfo = pplus_show_cpuinfo; ppc_md.init_IRQ = pplus_init_IRQ; /* this gets changed later on if we have an OpenPIC -- Cort */ ppc_md.get_irq = i8259_irq; ppc_md.init = pplus_init2; ppc_md.restart = pplus_restart; ppc_md.power_off = pplus_power_off; ppc_md.halt = pplus_halt; TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1, PREP_NVRAM_DATA, 8); ppc_md.time_init = todc_time_init; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; ppc_md.calibrate_decr = todc_calibrate_decr; ppc_md.nvram_read_val = todc_m48txx_read_val; ppc_md.nvram_write_val = todc_m48txx_write_val; ppc_md.find_end_of_memory = pplus_find_end_of_memory; ppc_md.setup_io_mappings = pplus_map_io; #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ppc_ide_md.default_irq = pplus_ide_default_irq; ppc_ide_md.default_io_base = pplus_ide_default_io_base; #endif #ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_TEXT_DEBUG */ #ifdef CONFIG_KGDB ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; #endif #ifdef CONFIG_SMP smp_ops = &pplus_smp_ops; #endif /* CONFIG_SMP */ }