/* -*- mode: c; c-basic-offset: 8 -*- */ /* Copyright (C) 1999,2001 * * Author: J.E.J.Bottomley@HansenPartnership.com * * This file provides all the same external entries as smp.c but uses * the voyager hal to provide the functionality */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* TLB state -- visible externally, indexed physically */ DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 }; /* CPU IRQ affinity -- set to all ones initially */ static unsigned long cpu_irq_affinity[NR_CPUS] __cacheline_aligned = {[0 ... NR_CPUS-1] = ~0UL }; /* per CPU data structure (for /proc/cpuinfo et al), visible externally * indexed physically */ DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); EXPORT_PER_CPU_SYMBOL(cpu_info); /* physical ID of the CPU used to boot the system */ unsigned char boot_cpu_id; /* The memory line addresses for the Quad CPIs */ struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS] __cacheline_aligned; /* The masks for the Extended VIC processors, filled in by cat_init */ __u32 voyager_extended_vic_processors = 0; /* Masks for the extended Quad processors which cannot be VIC booted */ __u32 voyager_allowed_boot_processors = 0; /* The mask for the Quad Processors (both extended and non-extended) */ __u32 voyager_quad_processors = 0; /* Total count of live CPUs, used in process.c to display * the CPU information and in irq.c for the per CPU irq * activity count. Finally exported by i386_ksyms.c */ static int voyager_extended_cpus = 1; /* Used for the invalidate map that's also checked in the spinlock */ static volatile unsigned long smp_invalidate_needed; /* Bitmask of CPUs present in the system - exported by i386_syms.c, used * by scheduler but indexed physically */ cpumask_t phys_cpu_present_map = CPU_MASK_NONE; /* The internal functions */ static void send_CPI(__u32 cpuset, __u8 cpi); static void ack_CPI(__u8 cpi); static int ack_QIC_CPI(__u8 cpi); static void ack_special_QIC_CPI(__u8 cpi); static void ack_VIC_CPI(__u8 cpi); static void send_CPI_allbutself(__u8 cpi); static void mask_vic_irq(unsigned int irq); static void unmask_vic_irq(unsigned int irq); static unsigned int startup_vic_irq(unsigned int irq); static void enable_local_vic_irq(unsigned int irq); static void disable_local_vic_irq(unsigned int irq); static void before_handle_vic_irq(unsigned int irq); static void after_handle_vic_irq(unsigned int irq); static void set_vic_irq_affinity(unsigned int irq, cpumask_t mask); static void ack_vic_irq(unsigned int irq); static void vic_enable_cpi(void); static void do_boot_cpu(__u8 cpuid); static void do_quad_bootstrap(void); static void initialize_secondary(void); int hard_smp_processor_id(void); int safe_smp_processor_id(void); /* Inline functions */ static inline void send_one_QIC_CPI(__u8 cpu, __u8 cpi) { voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi = (smp_processor_id() << 16) + cpi; } static inline void send_QIC_CPI(__u32 cpuset, __u8 cpi) { int cpu; for_each_online_cpu(cpu) { if (cpuset & (1 << cpu)) { #ifdef VOYAGER_DEBUG if (!cpu_online(cpu)) VDEBUG(("CPU%d sending cpi %d to CPU%d not in " "cpu_online_map\n", hard_smp_processor_id(), cpi, cpu)); #endif send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET); } } } static inline void wrapper_smp_local_timer_interrupt(void) { irq_enter(); smp_local_timer_interrupt(); irq_exit(); } static inline void send_one_CPI(__u8 cpu, __u8 cpi) { if (voyager_quad_processors & (1 << cpu)) send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET); else send_CPI(1 << cpu, cpi); } static inline void send_CPI_allbutself(__u8 cpi) { __u8 cpu = smp_processor_id(); __u32 mask = cpus_addr(cpu_online_map)[0] & ~(1 << cpu); send_CPI(mask, cpi); } static inline int is_cpu_quad(void) { __u8 cpumask = inb(VIC_PROC_WHO_AM_I); return ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER); } static inline int is_cpu_extended(void) { __u8 cpu = hard_smp_processor_id(); return (voyager_extended_vic_processors & (1 << cpu)); } static inline int is_cpu_vic_boot(void) { __u8 cpu = hard_smp_processor_id(); return (voyager_extended_vic_processors & voyager_allowed_boot_processors & (1 << cpu)); } static inline void ack_CPI(__u8 cpi) { switch (cpi) { case VIC_CPU_BOOT_CPI: if (is_cpu_quad() && !is_cpu_vic_boot()) ack_QIC_CPI(cpi); else ack_VIC_CPI(cpi); break; case VIC_SYS_INT: case VIC_CMN_INT: /* These are slightly strange. Even on the Quad card, * They are vectored as VIC CPIs */ if (is_cpu_quad()) ack_special_QIC_CPI(cpi); else ack_VIC_CPI(cpi); break; default: printk("VOYAGER ERROR: CPI%d is in common CPI code\n", cpi); break; } } /* local variables */ /* The VIC IRQ descriptors -- these look almost identical to the * 8259 IRQs except that masks and things must be kept per processor */ static struct irq_chip vic_chip = { .name = "VIC", .startup = startup_vic_irq, .mask = mask_vic_irq, .unmask = unmask_vic_irq, .set_affinity = set_vic_irq_affinity, }; /* used to count up as CPUs are brought on line (starts at 0) */ static int cpucount = 0; /* The per cpu profile stuff - used in smp_local_timer_interrupt */ static DEFINE_PER_CPU(int, prof_multiplier) = 1; static DEFINE_PER_CPU(int, prof_old_multiplier) = 1; static DEFINE_PER_CPU(int, prof_counter) = 1; /* the map used to check if a CPU has booted */ static __u32 cpu_booted_map; /* the synchronize flag used to hold all secondary CPUs spinning in * a tight loop until the boot sequence is ready for them */ static cpumask_t smp_commenced_mask = CPU_MASK_NONE; /* This is for the new dynamic CPU boot code */ cpumask_t cpu_callin_map = CPU_MASK_NONE; cpumask_t cpu_callout_map = CPU_MASK_NONE; /* The per processor IRQ masks (these are usually kept in sync) */ static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned; /* the list of IRQs to be enabled by the VIC_ENABLE_IRQ_CPI */ static __u16 vic_irq_enable_mask[NR_CPUS] __cacheline_aligned = { 0 }; /* Lock for enable/disable of VIC interrupts */ static __cacheline_aligned DEFINE_SPINLOCK(vic_irq_lock); /* The boot processor is correctly set up in PC mode when it * comes up, but the secondaries need their master/slave 8259 * pairs initializing correctly */ /* Interrupt counters (per cpu) and total - used to try to * even up the interrupt handling routines */ static long vic_intr_total = 0; static long vic_intr_count[NR_CPUS] __cacheline_aligned = { 0 }; static unsigned long vic_tick[NR_CPUS] __cacheline_aligned = { 0 }; /* Since we can only use CPI0, we fake all the other CPIs */ static unsigned long vic_cpi_mailbox[NR_CPUS] __cacheline_aligned; /* debugging routine to read the isr of the cpu's pic */ static inline __u16 vic_read_isr(void) { __u16 isr; outb(0x0b, 0xa0); isr = inb(0xa0) << 8; outb(0x0b, 0x20); isr |= inb(0x20); return isr; } static __init void qic_setup(void) { if (!is_cpu_quad()) { /* not a quad, no setup */ return; } outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0); outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1); if (is_cpu_extended()) { /* the QIC duplicate of the VIC base register */ outb(VIC_DEFAULT_CPI_BASE, QIC_VIC_CPI_BASE_REGISTER); outb(QIC_DEFAULT_CPI_BASE, QIC_CPI_BASE_REGISTER); /* FIXME: should set up the QIC timer and memory parity * error vectors here */ } } static __init void vic_setup_pic(void) { outb(1, VIC_REDIRECT_REGISTER_1); /* clear the claim registers for dynamic routing */ outb(0, VIC_CLAIM_REGISTER_0); outb(0, VIC_CLAIM_REGISTER_1); outb(0, VIC_PRIORITY_REGISTER); /* Set the Primary and Secondary Microchannel vector * bases to be the same as the ordinary interrupts * * FIXME: This would be more efficient using separate * vectors. */ outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE); outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE); /* Now initiallise the master PIC belonging to this CPU by * sending the four ICWs */ /* ICW1: level triggered, ICW4 needed */ outb(0x19, 0x20); /* ICW2: vector base */ outb(FIRST_EXTERNAL_VECTOR, 0x21); /* ICW3: slave at line 2 */ outb(0x04, 0x21); /* ICW4: 8086 mode */ outb(0x01, 0x21); /* now the same for the slave PIC */ /* ICW1: level trigger, ICW4 needed */ outb(0x19, 0xA0); /* ICW2: slave vector base */ outb(FIRST_EXTERNAL_VECTOR + 8, 0xA1); /* ICW3: slave ID */ outb(0x02, 0xA1); /* ICW4: 8086 mode */ outb(0x01, 0xA1); } static void do_quad_bootstrap(void) { if (is_cpu_quad() && is_cpu_vic_boot()) { int i; unsigned long flags; __u8 cpuid = hard_smp_processor_id(); local_irq_save(flags); for (i = 0; i < 4; i++) { /* FIXME: this would be >>3 &0x7 on the 32 way */ if (((cpuid >> 2) & 0x03) == i) /* don't lower our own mask! */ continue; /* masquerade as local Quad CPU */ outb(QIC_CPUID_ENABLE | i, QIC_PROCESSOR_ID); /* enable the startup CPI */ outb(QIC_BOOT_CPI_MASK, QIC_MASK_REGISTER1); /* restore cpu id */ outb(0, QIC_PROCESSOR_ID); } local_irq_restore(flags); } } void prefill_possible_map(void) { /* This is empty on voyager because we need a much * earlier detection which is done in find_smp_config */ } /* Set up all the basic stuff: read the SMP config and make all the * SMP information reflect only the boot cpu. All others will be * brought on-line later. */ void __init find_smp_config(void) { int i; boot_cpu_id = hard_smp_processor_id(); printk("VOYAGER SMP: Boot cpu is %d\n", boot_cpu_id); /* initialize the CPU structures (moved from smp_boot_cpus) */ for (i = 0; i < nr_cpu_ids; i++) cpu_irq_affinity[i] = ~0; cpu_online_map = cpumask_of_cpu(boot_cpu_id); /* The boot CPU must be extended */ voyager_extended_vic_processors = 1 << boot_cpu_id; /* initially, all of the first 8 CPUs can boot */ voyager_allowed_boot_processors = 0xff; /* set up everything for just this CPU, we can alter * this as we start the other CPUs later */ /* now get the CPU disposition from the extended CMOS */ cpus_addr(phys_cpu_present_map)[0] = voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK); cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16; cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; cpu_possible_map = phys_cpu_present_map; printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ /* enable the CPIs by writing the base vector to their register */ outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER); outb(1, VIC_REDIRECT_REGISTER_1); /* set the claim registers for static routing --- Boot CPU gets * all interrupts untill all other CPUs started */ outb(0xff, VIC_CLAIM_REGISTER_0); outb(0xff, VIC_CLAIM_REGISTER_1); /* Set the Primary and Secondary Microchannel vector * bases to be the same as the ordinary interrupts * * FIXME: This would be more efficient using separate * vectors. */ outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE); outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE); /* Finally tell the firmware that we're driving */ outb(inb(VOYAGER_SUS_IN_CONTROL_PORT) | VOYAGER_IN_CONTROL_FLAG, VOYAGER_SUS_IN_CONTROL_PORT); current_thread_info()->cpu = boot_cpu_id; percpu_write(cpu_number, boot_cpu_id); } /* * The bootstrap kernel entry code has set these up. Save them * for a given CPU, id is physical */ void __init smp_store_cpu_info(int id) { struct cpuinfo_x86 *c = &cpu_data(id); *c = boot_cpu_data; c->cpu_index = id; identify_secondary_cpu(c); } /* Routine initially called when a non-boot CPU is brought online */ static void __init start_secondary(void *unused) { __u8 cpuid = hard_smp_processor_id(); cpu_init(); /* OK, we're in the routine */ ack_CPI(VIC_CPU_BOOT_CPI); /* setup the 8259 master slave pair belonging to this CPU --- * we won't actually receive any until the boot CPU * relinquishes it's static routing mask */ vic_setup_pic(); qic_setup(); if (is_cpu_quad() && !is_cpu_vic_boot()) { /* clear the boot CPI */ __u8 dummy; dummy = voyager_quad_cpi_addr[cpuid]->qic_cpi[VIC_CPU_BOOT_CPI].cpi; printk("read dummy %d\n", dummy); } /* lower the mask to receive CPIs */ vic_enable_cpi(); VDEBUG(("VOYAGER SMP: CPU%d, stack at about %p\n", cpuid, &cpuid)); notify_cpu_starting(cpuid); /* enable interrupts */ local_irq_enable(); /* get our bogomips */ calibrate_delay(); /* save our processor parameters */ smp_store_cpu_info(cpuid); /* if we're a quad, we may need to bootstrap other CPUs */ do_quad_bootstrap(); /* FIXME: this is rather a poor hack to prevent the CPU * activating softirqs while it's supposed to be waiting for * permission to proceed. Without this, the new per CPU stuff * in the softirqs will fail */ local_irq_disable(); cpu_set(cpuid, cpu_callin_map); /* signal that we're done */ cpu_booted_map = 1; while (!cpu_isset(cpuid, smp_commenced_mask)) rep_nop(); local_irq_enable(); local_flush_tlb(); cpu_set(cpuid, cpu_online_map); wmb(); cpu_idle(); } /* Routine to kick start the given CPU and wait for it to report ready * (or timeout in startup). When this routine returns, the requested * CPU is either fully running and configured or known to be dead. * * We call this routine sequentially 1 CPU at a time, so no need for * locking */ static void __init do_boot_cpu(__u8 cpu) { struct task_struct *idle; int timeout; unsigned long flags; int quad_boot = (1 << cpu) & voyager_quad_processors & ~(voyager_extended_vic_processors & voyager_allowed_boot_processors); /* This is the format of the CPI IDT gate (in real mode) which * we're hijacking to boot the CPU */ union IDTFormat { struct seg { __u16 Offset; __u16 Segment; } idt; __u32 val; } hijack_source; __u32 *hijack_vector; __u32 start_phys_address = setup_trampoline(); /* There's a clever trick to this: The linux trampoline is * compiled to begin at absolute location zero, so make the * address zero but have the data segment selector compensate * for the actual address */ hijack_source.idt.Offset = start_phys_address & 0x000F; hijack_source.idt.Segment = (start_phys_address >> 4) & 0xFFFF; cpucount++; alternatives_smp_switch(1); idle = fork_idle(cpu); if (IS_ERR(idle)) panic("failed fork for CPU%d", cpu); idle->thread.ip = (unsigned long)start_secondary; /* init_tasks (in sched.c) is indexed logically */ stack_start.sp = (void *)idle->thread.sp; per_cpu(current_task, cpu) = idle; early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); irq_ctx_init(cpu); /* Note: Don't modify initial ss override */ VDEBUG(("VOYAGER SMP: Booting CPU%d at 0x%lx[%x:%x], stack %p\n", cpu, (unsigned long)hijack_source.val, hijack_source.idt.Segment, hijack_source.idt.Offset, stack_start.sp)); /* init lowmem identity mapping */ clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY, min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); flush_tlb_all(); if (quad_boot) { printk("CPU %d: non extended Quad boot\n", cpu); hijack_vector = (__u32 *) phys_to_virt((VIC_CPU_BOOT_CPI + QIC_DEFAULT_CPI_BASE) * 4); *hijack_vector = hijack_source.val; } else { printk("CPU%d: extended VIC boot\n", cpu); hijack_vector = (__u32 *) phys_to_virt((VIC_CPU_BOOT_CPI + VIC_DEFAULT_CPI_BASE) * 4); *hijack_vector = hijack_source.val; /* VIC errata, may also receive interrupt at this address */ hijack_vector = (__u32 *) phys_to_virt((VIC_CPU_BOOT_ERRATA_CPI + VIC_DEFAULT_CPI_BASE) * 4); *hijack_vector = hijack_source.val; } /* All non-boot CPUs start with interrupts fully masked. Need * to lower the mask of the CPI we're about to send. We do * this in the VIC by masquerading as the processor we're * about to boot and lowering its interrupt mask */ local_irq_save(flags); if (quad_boot) { send_one_QIC_CPI(cpu, VIC_CPU_BOOT_CPI); } else { outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID); /* here we're altering registers belonging to `cpu' */ outb(VIC_BOOT_INTERRUPT_MASK, 0x21); /* now go back to our original identity */ outb(boot_cpu_id, VIC_PROCESSOR_ID); /* and boot the CPU */ send_CPI((1 << cpu), VIC_CPU_BOOT_CPI); } cpu_booted_map = 0; local_irq_restore(flags); /* now wait for it to become ready (or timeout) */ for (timeout = 0; timeout < 50000; timeout++) { if (cpu_booted_map) break; udelay(100); } /* reset the page table */ zap_low_mappings(); if (cpu_booted_map) { VDEBUG(("CPU%d: Booted successfully, back in CPU %d\n", cpu, smp_processor_id())); printk("CPU%d: ", cpu); print_cpu_info(&cpu_data(cpu)); wmb(); cpu_set(cpu, cpu_callout_map); cpu_set(cpu, cpu_present_map); } else { printk("CPU%d FAILED TO BOOT: ", cpu); if (* ((volatile unsigned char *)phys_to_virt(start_phys_address)) == 0xA5) printk("Stuck.\n"); else printk("Not responding.\n"); cpucount--; } } void __init smp_boot_cpus(void) { int i; /* CAT BUS initialisation must be done after the memory */ /* FIXME: The L4 has a catbus too, it just needs to be * accessed in a totally different way */ if (voyager_level == 5) { voyager_cat_init(); /* now that the cat has probed the Voyager System Bus, sanity * check the cpu map */ if (((voyager_quad_processors | voyager_extended_vic_processors) & cpus_addr(phys_cpu_present_map)[0]) != cpus_addr(phys_cpu_present_map)[0]) { /* should panic */ printk("\n\n***WARNING*** " "Sanity check of CPU present map FAILED\n"); } } else if (voyager_level == 4) voyager_extended_vic_processors = cpus_addr(phys_cpu_present_map)[0]; /* this sets up the idle task to run on the current cpu */ voyager_extended_cpus = 1; /* Remove the global_irq_holder setting, it triggers a BUG() on * schedule at the moment */ //global_irq_holder = boot_cpu_id; /* FIXME: Need to do something about this but currently only works * on CPUs with a tsc which none of mine have. smp_tune_scheduling(); */ smp_store_cpu_info(boot_cpu_id); /* setup the jump vector */ initial_code = (unsigned long)initialize_secondary; printk("CPU%d: ", boot_cpu_id); print_cpu_info(&cpu_data(boot_cpu_id)); if (is_cpu_quad()) { /* booting on a Quad CPU */ printk("VOYAGER SMP: Boot CPU is Quad\n"); qic_setup(); do_quad_bootstrap(); } /* enable our own CPIs */ vic_enable_cpi(); cpu_set(boot_cpu_id, cpu_online_map); cpu_set(boot_cpu_id, cpu_callout_map); /* loop over all the extended VIC CPUs and boot them. The * Quad CPUs must be bootstrapped by their extended VIC cpu */ for (i = 0; i < nr_cpu_ids; i++) { if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map)) continue; do_boot_cpu(i); /* This udelay seems to be needed for the Quad boots * don't remove unless you know what you're doing */ udelay(1000); } /* we could compute the total bogomips here, but why bother?, * Code added from smpboot.c */ { unsigned long bogosum = 0; for_each_online_cpu(i) bogosum += cpu_data(i).loops_per_jiffy; printk(KERN_INFO "Total of %d processors activated " "(%lu.%02lu BogoMIPS).\n", cpucount + 1, bogosum / (500000 / HZ), (bogosum / (5000 / HZ)) % 100); } voyager_extended_cpus = hweight32(voyager_extended_vic_processors); printk("VOYAGER: Extended (interrupt handling CPUs): " "%d, non-extended: %d\n", voyager_extended_cpus, num_booting_cpus() - voyager_extended_cpus); /* that's it, switch to symmetric mode */ outb(0, VIC_PRIORITY_REGISTER); outb(0, VIC_CLAIM_REGISTER_0); outb(0, VIC_CLAIM_REGISTER_1); VDEBUG(("VOYAGER SMP: Booted with %d CPUs\n", num_booting_cpus())); } /* Reload the secondary CPUs task structure (this function does not * return ) */ static void __init initialize_secondary(void) { #if 0 // AC kernels only set_current(hard_get_current()); #endif /* * We don't actually need to load the full TSS, * basically just the stack pointer and the eip. */ asm volatile ("movl %0,%%esp\n\t" "jmp *%1"::"r" (current->thread.sp), "r"(current->thread.ip)); } /* handle a Voyager SYS_INT -- If we don't, the base board will * panic the system. * * System interrupts occur because some problem was detected on the * various busses. To find out what you have to probe all the * hardware via the CAT bus. FIXME: At the moment we do nothing. */ void smp_vic_sys_interrupt(struct pt_regs *regs) { ack_CPI(VIC_SYS_INT); printk("Voyager SYSTEM INTERRUPT\n"); } /* Handle a voyager CMN_INT; These interrupts occur either because of * a system status change or because a single bit memory error * occurred. FIXME: At the moment, ignore all this. */ void smp_vic_cmn_interrupt(struct pt_regs *regs) { static __u8 in_cmn_int = 0; static DEFINE_SPINLOCK(cmn_int_lock); /* common ints are broadcast, so make sure we only do this once */ _raw_spin_lock(&cmn_int_lock); if (in_cmn_int) goto unlock_end; in_cmn_int++; _raw_spin_unlock(&cmn_int_lock); VDEBUG(("Voyager COMMON INTERRUPT\n")); if (voyager_level == 5) voyager_cat_do_common_interrupt(); _raw_spin_lock(&cmn_int_lock); in_cmn_int = 0; unlock_end: _raw_spin_unlock(&cmn_int_lock); ack_CPI(VIC_CMN_INT); } /* * Reschedule call back. Nothing to do, all the work is done * automatically when we return from the interrupt. */ static void smp_reschedule_interrupt(void) { /* do nothing */ } static struct mm_struct *flush_mm; static unsigned long flush_va; static DEFINE_SPINLOCK(tlbstate_lock); /* * We cannot call mmdrop() because we are in interrupt context, * instead update mm->cpu_vm_mask. * * We need to reload %cr3 since the page tables may be going * away from under us.. */ static inline void voyager_leave_mm(unsigned long cpu) { if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) BUG(); cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask); load_cr3(swapper_pg_dir); } /* * Invalidate call-back */ static void smp_invalidate_interrupt(void) { __u8 cpu = smp_processor_id(); if (!test_bit(cpu, &smp_invalidate_needed)) return; /* This will flood messages. Don't uncomment unless you see * Problems with cross cpu invalidation VDEBUG(("VOYAGER SMP: CPU%d received INVALIDATE_CPI\n", smp_processor_id())); */ if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) { if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) { if (flush_va == TLB_FLUSH_ALL) local_flush_tlb(); else __flush_tlb_one(flush_va); } else voyager_leave_mm(cpu); } smp_mb__before_clear_bit(); clear_bit(cpu, &smp_invalidate_needed); smp_mb__after_clear_bit(); } /* All the new flush operations for 2.4 */ /* This routine is called with a physical cpu mask */ static void voyager_flush_tlb_others(unsigned long cpumask, struct mm_struct *mm, unsigned long va) { int stuck = 50000; if (!cpumask) BUG(); if ((cpumask & cpus_addr(cpu_online_map)[0]) != cpumask) BUG(); if (cpumask & (1 << smp_processor_id())) BUG(); if (!mm) BUG(); spin_lock(&tlbstate_lock); flush_mm = mm; flush_va = va; atomic_set_mask(cpumask, &smp_invalidate_needed); /* * We have to send the CPI only to * CPUs affected. */ send_CPI(cpumask, VIC_INVALIDATE_CPI); while (smp_invalidate_needed) { mb(); if (--stuck == 0) { printk("***WARNING*** Stuck doing invalidate CPI " "(CPU%d)\n", smp_processor_id()); break; } } /* Uncomment only to debug invalidation problems VDEBUG(("VOYAGER SMP: Completed invalidate CPI (CPU%d)\n", cpu)); */ flush_mm = NULL; flush_va = 0; spin_unlock(&tlbstate_lock); } void flush_tlb_current_task(void) { struct mm_struct *mm = current->mm; unsigned long cpu_mask; preempt_disable(); cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id()); local_flush_tlb(); if (cpu_mask) voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); preempt_enable(); } void flush_tlb_mm(struct mm_struct *mm) { unsigned long cpu_mask; preempt_disable(); cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id()); if (current->active_mm == mm) { if (current->mm) local_flush_tlb(); else voyager_leave_mm(smp_processor_id()); } if (cpu_mask) voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); preempt_enable(); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) { struct mm_struct *mm = vma->vm_mm; unsigned long cpu_mask; preempt_disable(); cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id()); if (current->active_mm == mm) { if (current->mm) __flush_tlb_one(va); else voyager_leave_mm(smp_processor_id()); } if (cpu_mask) voyager_flush_tlb_others(cpu_mask, mm, va); preempt_enable(); } EXPORT_SYMBOL(flush_tlb_page); /* enable the requested IRQs */ static void smp_enable_irq_interrupt(void) { __u8 irq; __u8 cpu = get_cpu(); VDEBUG(("VOYAGER SMP: CPU%d enabling irq mask 0x%x\n", cpu, vic_irq_enable_mask[cpu])); spin_lock(&vic_irq_lock); for (irq = 0; irq < 16; irq++) { if (vic_irq_enable_mask[cpu] & (1 << irq)) enable_local_vic_irq(irq); } vic_irq_enable_mask[cpu] = 0; spin_unlock(&vic_irq_lock); put_cpu_no_resched(); } /* * CPU halt call-back */ static void smp_stop_cpu_function(void *dummy) { VDEBUG(("VOYAGER SMP: CPU%d is STOPPING\n", smp_processor_id())); cpu_clear(smp_processor_id(), cpu_online_map); local_irq_disable(); for (;;) halt(); } /* execute a thread on a new CPU. The function to be called must be * previously set up. This is used to schedule a function for * execution on all CPUs - set up the function then broadcast a * function_interrupt CPI to come here on each CPU */ static void smp_call_function_interrupt(void) { irq_enter(); generic_smp_call_function_interrupt(); __get_cpu_var(irq_stat).irq_call_count++; irq_exit(); } static void smp_call_function_single_interrupt(void) { irq_enter(); generic_smp_call_function_single_interrupt(); __get_cpu_var(irq_stat).irq_call_count++; irq_exit(); } /* Sorry about the name. In an APIC based system, the APICs * themselves are programmed to send a timer interrupt. This is used * by linux to reschedule the processor. Voyager doesn't have this, * so we use the system clock to interrupt one processor, which in * turn, broadcasts a timer CPI to all the others --- we receive that * CPI here. We don't use this actually for counting so losing * ticks doesn't matter * * FIXME: For those CPUs which actually have a local APIC, we could * try to use it to trigger this interrupt instead of having to * broadcast the timer tick. Unfortunately, all my pentium DYADs have * no local APIC, so I can't do this * * This function is currently a placeholder and is unused in the code */ void smp_apic_timer_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); wrapper_smp_local_timer_interrupt(); set_irq_regs(old_regs); } /* All of the QUAD interrupt GATES */ void smp_qic_timer_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); ack_QIC_CPI(QIC_TIMER_CPI); wrapper_smp_local_timer_interrupt(); set_irq_regs(old_regs); } void smp_qic_invalidate_interrupt(struct pt_regs *regs) { ack_QIC_CPI(QIC_INVALIDATE_CPI); smp_invalidate_interrupt(); } void smp_qic_reschedule_interrupt(struct pt_regs *regs) { ack_QIC_CPI(QIC_RESCHEDULE_CPI); smp_reschedule_interrupt(); } void smp_qic_enable_irq_interrupt(struct pt_regs *regs) { ack_QIC_CPI(QIC_ENABLE_IRQ_CPI); smp_enable_irq_interrupt(); } void smp_qic_call_function_interrupt(struct pt_regs *regs) { ack_QIC_CPI(QIC_CALL_FUNCTION_CPI); smp_call_function_interrupt(); } void smp_qic_call_function_single_interrupt(struct pt_regs *regs) { ack_QIC_CPI(QIC_CALL_FUNCTION_SINGLE_CPI); smp_call_function_single_interrupt(); } void smp_vic_cpi_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); __u8 cpu = smp_processor_id(); if (is_cpu_quad()) ack_QIC_CPI(VIC_CPI_LEVEL0); else ack_VIC_CPI(VIC_CPI_LEVEL0); if (test_and_clear_bit(VIC_TIMER_CPI, &vic_cpi_mailbox[cpu])) wrapper_smp_local_timer_interrupt(); if (test_and_clear_bit(VIC_INVALIDATE_CPI, &vic_cpi_mailbox[cpu])) smp_invalidate_interrupt(); if (test_and_clear_bit(VIC_RESCHEDULE_CPI, &vic_cpi_mailbox[cpu])) smp_reschedule_interrupt(); if (test_and_clear_bit(VIC_ENABLE_IRQ_CPI, &vic_cpi_mailbox[cpu])) smp_enable_irq_interrupt(); if (test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu])) smp_call_function_interrupt(); if (test_and_clear_bit(VIC_CALL_FUNCTION_SINGLE_CPI, &vic_cpi_mailbox[cpu])) smp_call_function_single_interrupt(); set_irq_regs(old_regs); } static void do_flush_tlb_all(void *info) { unsigned long cpu = smp_processor_id(); __flush_tlb_all(); if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY) voyager_leave_mm(cpu); } /* flush the TLB of every active CPU in the system */ void flush_tlb_all(void) { on_each_cpu(do_flush_tlb_all, 0, 1); } /* send a reschedule CPI to one CPU by physical CPU number*/ static void voyager_smp_send_reschedule(int cpu) { send_one_CPI(cpu, VIC_RESCHEDULE_CPI); } int hard_smp_processor_id(void) { __u8 i; __u8 cpumask = inb(VIC_PROC_WHO_AM_I); if ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER) return cpumask & 0x1F; for (i = 0; i < 8; i++) { if (cpumask & (1 << i)) return i; } printk("** WARNING ** Illegal cpuid returned by VIC: %d", cpumask); return 0; } int safe_smp_processor_id(void) { return hard_smp_processor_id(); } /* broadcast a halt to all other CPUs */ static void voyager_smp_send_stop(void) { smp_call_function(smp_stop_cpu_function, NULL, 1); } /* this function is triggered in time.c when a clock tick fires * we need to re-broadcast the tick to all CPUs */ void smp_vic_timer_interrupt(void) { send_CPI_allbutself(VIC_TIMER_CPI); smp_local_timer_interrupt(); } /* local (per CPU) timer interrupt. It does both profiling and * process statistics/rescheduling. * * We do profiling in every local tick, statistics/rescheduling * happen only every 'profiling multiplier' ticks. The default * multiplier is 1 and it can be changed by writing the new multiplier * value into /proc/profile. */ void smp_local_timer_interrupt(void) { int cpu = smp_processor_id(); long weight; profile_tick(CPU_PROFILING); if (--per_cpu(prof_counter, cpu) <= 0) { /* * The multiplier may have changed since the last time we got * to this point as a result of the user writing to * /proc/profile. In this case we need to adjust the APIC * timer accordingly. * * Interrupts are already masked off at this point. */ per_cpu(prof_counter, cpu) = per_cpu(prof_multiplier, cpu); if (per_cpu(prof_counter, cpu) != per_cpu(prof_old_multiplier, cpu)) { /* FIXME: need to update the vic timer tick here */ per_cpu(prof_old_multiplier, cpu) = per_cpu(prof_counter, cpu); } update_process_times(user_mode_vm(get_irq_regs())); } if (((1 << cpu) & voyager_extended_vic_processors) == 0) /* only extended VIC processors participate in * interrupt distribution */ return; /* * We take the 'long' return path, and there every subsystem * grabs the appropriate locks (kernel lock/ irq lock). * * we might want to decouple profiling from the 'long path', * and do the profiling totally in assembly. * * Currently this isn't too much of an issue (performance wise), * we can take more than 100K local irqs per second on a 100 MHz P5. */ if ((++vic_tick[cpu] & 0x7) != 0) return; /* get here every 16 ticks (about every 1/6 of a second) */ /* Change our priority to give someone else a chance at getting * the IRQ. The algorithm goes like this: * * In the VIC, the dynamically routed interrupt is always * handled by the lowest priority eligible (i.e. receiving * interrupts) CPU. If >1 eligible CPUs are equal lowest, the * lowest processor number gets it. * * The priority of a CPU is controlled by a special per-CPU * VIC priority register which is 3 bits wide 0 being lowest * and 7 highest priority.. * * Therefore we subtract the average number of interrupts from * the number we've fielded. If this number is negative, we * lower the activity count and if it is positive, we raise * it. * * I'm afraid this still leads to odd looking interrupt counts: * the totals are all roughly equal, but the individual ones * look rather skewed. * * FIXME: This algorithm is total crap when mixed with SMP * affinity code since we now try to even up the interrupt * counts when an affinity binding is keeping them on a * particular CPU*/ weight = (vic_intr_count[cpu] * voyager_extended_cpus - vic_intr_total) >> 4; weight += 4; if (weight > 7) weight = 7; if (weight < 0) weight = 0; outb((__u8) weight, VIC_PRIORITY_REGISTER); #ifdef VOYAGER_DEBUG if ((vic_tick[cpu] & 0xFFF) == 0) { /* print this message roughly every 25 secs */ printk("VOYAGER SMP: vic_tick[%d] = %lu, weight = %ld\n", cpu, vic_tick[cpu], weight); } #endif } /* setup the profiling timer */ int setup_profiling_timer(unsigned int multiplier) { int i; if ((!multiplier)) return -EINVAL; /* * Set the new multiplier for each CPU. CPUs don't start using the * new values until the next timer interrupt in which they do process * accounting. */ for (i = 0; i < nr_cpu_ids; ++i) per_cpu(prof_multiplier, i) = multiplier; return 0; } /* This is a bit of a mess, but forced on us by the genirq changes * there's no genirq handler that really does what voyager wants * so hack it up with the simple IRQ handler */ static void handle_vic_irq(unsigned int irq, struct irq_desc *desc) { before_handle_vic_irq(irq); handle_simple_irq(irq, desc); after_handle_vic_irq(irq); } /* The CPIs are handled in the per cpu 8259s, so they must be * enabled to be received: FIX: enabling the CPIs in the early * boot sequence interferes with bug checking; enable them later * on in smp_init */ #define VIC_SET_GATE(cpi, vector) \ set_intr_gate((cpi) + VIC_DEFAULT_CPI_BASE, (vector)) #define QIC_SET_GATE(cpi, vector) \ set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector)) void __init voyager_smp_intr_init(void) { int i; /* initialize the per cpu irq mask to all disabled */ for (i = 0; i < nr_cpu_ids; i++) vic_irq_mask[i] = 0xFFFF; VIC_SET_GATE(VIC_CPI_LEVEL0, vic_cpi_interrupt); VIC_SET_GATE(VIC_SYS_INT, vic_sys_interrupt); VIC_SET_GATE(VIC_CMN_INT, vic_cmn_interrupt); QIC_SET_GATE(QIC_TIMER_CPI, qic_timer_interrupt); QIC_SET_GATE(QIC_INVALIDATE_CPI, qic_invalidate_interrupt); QIC_SET_GATE(QIC_RESCHEDULE_CPI, qic_reschedule_interrupt); QIC_SET_GATE(QIC_ENABLE_IRQ_CPI, qic_enable_irq_interrupt); QIC_SET_GATE(QIC_CALL_FUNCTION_CPI, qic_call_function_interrupt); /* now put the VIC descriptor into the first 48 IRQs * * This is for later: first 16 correspond to PC IRQs; next 16 * are Primary MC IRQs and final 16 are Secondary MC IRQs */ for (i = 0; i < 48; i++) set_irq_chip_and_handler(i, &vic_chip, handle_vic_irq); } /* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per * processor to receive CPI */ static void send_CPI(__u32 cpuset, __u8 cpi) { int cpu; __u32 quad_cpuset = (cpuset & voyager_quad_processors); if (cpi < VIC_START_FAKE_CPI) { /* fake CPI are only used for booting, so send to the * extended quads as well---Quads must be VIC booted */ outb((__u8) (cpuset), VIC_CPI_Registers[cpi]); return; } if (quad_cpuset) send_QIC_CPI(quad_cpuset, cpi); cpuset &= ~quad_cpuset; cpuset &= 0xff; /* only first 8 CPUs vaild for VIC CPI */ if (cpuset == 0) return; for_each_online_cpu(cpu) { if (cpuset & (1 << cpu)) set_bit(cpi, &vic_cpi_mailbox[cpu]); } if (cpuset) outb((__u8) cpuset, VIC_CPI_Registers[VIC_CPI_LEVEL0]); } /* Acknowledge receipt of CPI in the QIC, clear in QIC hardware and * set the cache line to shared by reading it. * * DON'T make this inline otherwise the cache line read will be * optimised away * */ static int ack_QIC_CPI(__u8 cpi) { __u8 cpu = hard_smp_processor_id(); cpi &= 7; outb(1 << cpi, QIC_INTERRUPT_CLEAR1); return voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi; } static void ack_special_QIC_CPI(__u8 cpi) { switch (cpi) { case VIC_CMN_INT: outb(QIC_CMN_INT, QIC_INTERRUPT_CLEAR0); break; case VIC_SYS_INT: outb(QIC_SYS_INT, QIC_INTERRUPT_CLEAR0); break; } /* also clear at the VIC, just in case (nop for non-extended proc) */ ack_VIC_CPI(cpi); } /* Acknowledge receipt of CPI in the VIC (essentially an EOI) */ static void ack_VIC_CPI(__u8 cpi) { #ifdef VOYAGER_DEBUG unsigned long flags; __u16 isr; __u8 cpu = smp_processor_id(); local_irq_save(flags); isr = vic_read_isr(); if ((isr & (1 << (cpi & 7))) == 0) { printk("VOYAGER SMP: CPU%d lost CPI%d\n", cpu, cpi); } #endif /* send specific EOI; the two system interrupts have * bit 4 set for a separate vector but behave as the * corresponding 3 bit intr */ outb_p(0x60 | (cpi & 7), 0x20); #ifdef VOYAGER_DEBUG if ((vic_read_isr() & (1 << (cpi & 7))) != 0) { printk("VOYAGER SMP: CPU%d still asserting CPI%d\n", cpu, cpi); } local_irq_restore(flags); #endif } /* cribbed with thanks from irq.c */ #define __byte(x,y) (((unsigned char *)&(y))[x]) #define cached_21(cpu) (__byte(0,vic_irq_mask[cpu])) #define cached_A1(cpu) (__byte(1,vic_irq_mask[cpu])) static unsigned int startup_vic_irq(unsigned int irq) { unmask_vic_irq(irq); return 0; } /* The enable and disable routines. This is where we run into * conflicting architectural philosophy. Fundamentally, the voyager * architecture does not expect to have to disable interrupts globally * (the IRQ controllers belong to each CPU). The processor masquerade * which is used to start the system shouldn't be used in a running OS * since it will cause great confusion if two separate CPUs drive to * the same IRQ controller (I know, I've tried it). * * The solution is a variant on the NCR lazy SPL design: * * 1) To disable an interrupt, do nothing (other than set the * IRQ_DISABLED flag). This dares the interrupt actually to arrive. * * 2) If the interrupt dares to come in, raise the local mask against * it (this will result in all the CPU masks being raised * eventually). * * 3) To enable the interrupt, lower the mask on the local CPU and * broadcast an Interrupt enable CPI which causes all other CPUs to * adjust their masks accordingly. */ static void unmask_vic_irq(unsigned int irq) { /* linux doesn't to processor-irq affinity, so enable on * all CPUs we know about */ int cpu = smp_processor_id(), real_cpu; __u16 mask = (1 << irq); __u32 processorList = 0; unsigned long flags; VDEBUG(("VOYAGER: unmask_vic_irq(%d) CPU%d affinity 0x%lx\n", irq, cpu, cpu_irq_affinity[cpu])); spin_lock_irqsave(&vic_irq_lock, flags); for_each_online_cpu(real_cpu) { if (!(voyager_extended_vic_processors & (1 << real_cpu))) continue; if (!(cpu_irq_affinity[real_cpu] & mask)) { /* irq has no affinity for this CPU, ignore */ continue; } if (real_cpu == cpu) { enable_local_vic_irq(irq); } else if (vic_irq_mask[real_cpu] & mask) { vic_irq_enable_mask[real_cpu] |= mask; processorList |= (1 << real_cpu); } } spin_unlock_irqrestore(&vic_irq_lock, flags); if (processorList) send_CPI(processorList, VIC_ENABLE_IRQ_CPI); } static void mask_vic_irq(unsigned int irq) { /* lazy disable, do nothing */ } static void enable_local_vic_irq(unsigned int irq) { __u8 cpu = smp_processor_id(); __u16 mask = ~(1 << irq); __u16 old_mask = vic_irq_mask[cpu]; vic_irq_mask[cpu] &= mask; if (vic_irq_mask[cpu] == old_mask) return; VDEBUG(("VOYAGER DEBUG: Enabling irq %d in hardware on CPU %d\n", irq, cpu)); if (irq & 8) { outb_p(cached_A1(cpu), 0xA1); (void)inb_p(0xA1); } else { outb_p(cached_21(cpu), 0x21); (void)inb_p(0x21); } } static void disable_local_vic_irq(unsigned int irq) { __u8 cpu = smp_processor_id(); __u16 mask = (1 << irq); __u16 old_mask = vic_irq_mask[cpu]; if (irq == 7) return; vic_irq_mask[cpu] |= mask; if (old_mask == vic_irq_mask[cpu]) return; VDEBUG(("VOYAGER DEBUG: Disabling irq %d in hardware on CPU %d\n", irq, cpu)); if (irq & 8) { outb_p(cached_A1(cpu), 0xA1); (void)inb_p(0xA1); } else { outb_p(cached_21(cpu), 0x21); (void)inb_p(0x21); } } /* The VIC is level triggered, so the ack can only be issued after the * interrupt completes. However, we do Voyager lazy interrupt * handling here: It is an extremely expensive operation to mask an * interrupt in the vic, so we merely set a flag (IRQ_DISABLED). If * this interrupt actually comes in, then we mask and ack here to push * the interrupt off to another CPU */ static void before_handle_vic_irq(unsigned int irq) { irq_desc_t *desc = irq_to_desc(irq); __u8 cpu = smp_processor_id(); _raw_spin_lock(&vic_irq_lock); vic_intr_total++; vic_intr_count[cpu]++; if (!(cpu_irq_affinity[cpu] & (1 << irq))) { /* The irq is not in our affinity mask, push it off * onto another CPU */ VDEBUG(("VOYAGER DEBUG: affinity triggered disable of irq %d " "on cpu %d\n", irq, cpu)); disable_local_vic_irq(irq); /* set IRQ_INPROGRESS to prevent the handler in irq.c from * actually calling the interrupt routine */ desc->status |= IRQ_REPLAY | IRQ_INPROGRESS; } else if (desc->status & IRQ_DISABLED) { /* Damn, the interrupt actually arrived, do the lazy * disable thing. The interrupt routine in irq.c will * not handle a IRQ_DISABLED interrupt, so nothing more * need be done here */ VDEBUG(("VOYAGER DEBUG: lazy disable of irq %d on CPU %d\n", irq, cpu)); disable_local_vic_irq(irq); desc->status |= IRQ_REPLAY; } else { desc->status &= ~IRQ_REPLAY; } _raw_spin_unlock(&vic_irq_lock); } /* Finish the VIC interrupt: basically mask */ static void after_handle_vic_irq(unsigned int irq) { irq_desc_t *desc = irq_to_desc(irq); _raw_spin_lock(&vic_irq_lock); { unsigned int status = desc->status & ~IRQ_INPROGRESS; #ifdef VOYAGER_DEBUG __u16 isr; #endif desc->status = status; if ((status & IRQ_DISABLED)) disable_local_vic_irq(irq); #ifdef VOYAGER_DEBUG /* DEBUG: before we ack, check what's in progress */ isr = vic_read_isr(); if ((isr & (1 << irq) && !(status & IRQ_REPLAY)) == 0) { int i; __u8 cpu = smp_processor_id(); __u8 real_cpu; int mask; /* Um... initialize me??? --RR */ printk("VOYAGER SMP: CPU%d lost interrupt %d\n", cpu, irq); for_each_possible_cpu(real_cpu, mask) { outb(VIC_CPU_MASQUERADE_ENABLE | real_cpu, VIC_PROCESSOR_ID); isr = vic_read_isr(); if (isr & (1 << irq)) { printk ("VOYAGER SMP: CPU%d ack irq %d\n", real_cpu, irq); ack_vic_irq(irq); } outb(cpu, VIC_PROCESSOR_ID); } } #endif /* VOYAGER_DEBUG */ /* as soon as we ack, the interrupt is eligible for * receipt by another CPU so everything must be in * order here */ ack_vic_irq(irq); if (status & IRQ_REPLAY) { /* replay is set if we disable the interrupt * in the before_handle_vic_irq() routine, so * clear the in progress bit here to allow the * next CPU to handle this correctly */ desc->status &= ~(IRQ_REPLAY | IRQ_INPROGRESS); } #ifdef VOYAGER_DEBUG isr = vic_read_isr(); if ((isr & (1 << irq)) != 0) printk("VOYAGER SMP: after_handle_vic_irq() after " "ack irq=%d, isr=0x%x\n", irq, isr); #endif /* VOYAGER_DEBUG */ } _raw_spin_unlock(&vic_irq_lock); /* All code after this point is out of the main path - the IRQ * may be intercepted by another CPU if reasserted */ } /* Linux processor - interrupt affinity manipulations. * * For each processor, we maintain a 32 bit irq affinity mask. * Initially it is set to all 1's so every processor accepts every * interrupt. In this call, we change the processor's affinity mask: * * Change from enable to disable: * * If the interrupt ever comes in to the processor, we will disable it * and ack it to push it off to another CPU, so just accept the mask here. * * Change from disable to enable: * * change the mask and then do an interrupt enable CPI to re-enable on * the selected processors */ void set_vic_irq_affinity(unsigned int irq, cpumask_t mask) { /* Only extended processors handle interrupts */ unsigned long real_mask; unsigned long irq_mask = 1 << irq; int cpu; real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors; if (cpus_addr(mask)[0] == 0) /* can't have no CPUs to accept the interrupt -- extremely * bad things will happen */ return; if (irq == 0) /* can't change the affinity of the timer IRQ. This * is due to the constraint in the voyager * architecture that the CPI also comes in on and IRQ * line and we have chosen IRQ0 for this. If you * raise the mask on this interrupt, the processor * will no-longer be able to accept VIC CPIs */ return; if (irq >= 32) /* You can only have 32 interrupts in a voyager system * (and 32 only if you have a secondary microchannel * bus) */ return; for_each_online_cpu(cpu) { unsigned long cpu_mask = 1 << cpu; if (cpu_mask & real_mask) { /* enable the interrupt for this cpu */ cpu_irq_affinity[cpu] |= irq_mask; } else { /* disable the interrupt for this cpu */ cpu_irq_affinity[cpu] &= ~irq_mask; } } /* this is magic, we now have the correct affinity maps, so * enable the interrupt. This will send an enable CPI to * those CPUs who need to enable it in their local masks, * causing them to correct for the new affinity . If the * interrupt is currently globally disabled, it will simply be * disabled again as it comes in (voyager lazy disable). If * the affinity map is tightened to disable the interrupt on a * cpu, it will be pushed off when it comes in */ unmask_vic_irq(irq); } static void ack_vic_irq(unsigned int irq) { if (irq & 8) { outb(0x62, 0x20); /* Specific EOI to cascade */ outb(0x60 | (irq & 7), 0xA0); } else { outb(0x60 | (irq & 7), 0x20); } } /* enable the CPIs. In the VIC, the CPIs are delivered by the 8259 * but are not vectored by it. This means that the 8259 mask must be * lowered to receive them */ static __init void vic_enable_cpi(void) { __u8 cpu = smp_processor_id(); /* just take a copy of the current mask (nop for boot cpu) */ vic_irq_mask[cpu] = vic_irq_mask[boot_cpu_id]; enable_local_vic_irq(VIC_CPI_LEVEL0); enable_local_vic_irq(VIC_CPI_LEVEL1); /* for sys int and cmn int */ enable_local_vic_irq(7); if (is_cpu_quad()) { outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0); outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1); VDEBUG(("VOYAGER SMP: QIC ENABLE CPI: CPU%d: MASK 0x%x\n", cpu, QIC_CPI_ENABLE)); } VDEBUG(("VOYAGER SMP: ENABLE CPI: CPU%d: MASK 0x%x\n", cpu, vic_irq_mask[cpu])); } void voyager_smp_dump() { int old_cpu = smp_processor_id(), cpu; /* dump the interrupt masks of each processor */ for_each_online_cpu(cpu) { __u16 imr, isr, irr; unsigned long flags; local_irq_save(flags); outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID); imr = (inb(0xa1) << 8) | inb(0x21); outb(0x0a, 0xa0); irr = inb(0xa0) << 8; outb(0x0a, 0x20); irr |= inb(0x20); outb(0x0b, 0xa0); isr = inb(0xa0) << 8; outb(0x0b, 0x20); isr |= inb(0x20); outb(old_cpu, VIC_PROCESSOR_ID); local_irq_restore(flags); printk("\tCPU%d: mask=0x%x, IMR=0x%x, IRR=0x%x, ISR=0x%x\n", cpu, vic_irq_mask[cpu], imr, irr, isr); #if 0 /* These lines are put in to try to unstick an un ack'd irq */ if (isr != 0) { int irq; for (irq = 0; irq < 16; irq++) { if (isr & (1 << irq)) { printk("\tCPU%d: ack irq %d\n", cpu, irq); local_irq_save(flags); outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID); ack_vic_irq(irq); outb(old_cpu, VIC_PROCESSOR_ID); local_irq_restore(flags); } } } #endif } } void smp_voyager_power_off(void *dummy) { if (smp_processor_id() == boot_cpu_id) voyager_power_off(); else smp_stop_cpu_function(NULL); } static void __init voyager_smp_prepare_cpus(unsigned int max_cpus) { /* FIXME: ignore max_cpus for now */ smp_boot_cpus(); } static void __cpuinit voyager_smp_prepare_boot_cpu(void) { switch_to_new_gdt(); cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), cpu_callout_map); cpu_set(smp_processor_id(), cpu_possible_map); cpu_set(smp_processor_id(), cpu_present_map); } static int __cpuinit voyager_cpu_up(unsigned int cpu) { /* This only works at boot for x86. See "rewrite" above. */ if (cpu_isset(cpu, smp_commenced_mask)) return -ENOSYS; /* In case one didn't come up */ if (!cpu_isset(cpu, cpu_callin_map)) return -EIO; /* Unleash the CPU! */ cpu_set(cpu, smp_commenced_mask); while (!cpu_online(cpu)) mb(); return 0; } static void __init voyager_smp_cpus_done(unsigned int max_cpus) { zap_low_mappings(); } void __init smp_setup_processor_id(void) { current_thread_info()->cpu = hard_smp_processor_id(); } static void voyager_send_call_func(cpumask_t callmask) { __u32 mask = cpus_addr(callmask)[0] & ~(1 << smp_processor_id()); send_CPI(mask, VIC_CALL_FUNCTION_CPI); } static void voyager_send_call_func_single(int cpu) { send_CPI(1 << cpu, VIC_CALL_FUNCTION_SINGLE_CPI); } struct smp_ops smp_ops = { .smp_prepare_boot_cpu = voyager_smp_prepare_boot_cpu, .smp_prepare_cpus = voyager_smp_prepare_cpus, .cpu_up = voyager_cpu_up, .smp_cpus_done = voyager_smp_cpus_done, .smp_send_stop = voyager_smp_send_stop, .smp_send_reschedule = voyager_smp_send_reschedule, .send_call_func_ipi = voyager_send_call_func, .send_call_func_single_ipi = voyager_send_call_func_single, };