#include <linux/linkage.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/timex.h> #include <linux/slab.h> #include <linux/random.h> #include <linux/smp_lock.h> #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/sysdev.h> #include <linux/bitops.h> #include <asm/acpi.h> #include <asm/atomic.h> #include <asm/system.h> #include <asm/io.h> #include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/delay.h> #include <asm/desc.h> #include <asm/apic.h> /* * Common place to define all x86 IRQ vectors * * This builds up the IRQ handler stubs using some ugly macros in irq.h * * These macros create the low-level assembly IRQ routines that save * register context and call do_IRQ(). do_IRQ() then does all the * operations that are needed to keep the AT (or SMP IOAPIC) * interrupt-controller happy. */ #define BI(x,y) \ BUILD_IRQ(x##y) #define BUILD_16_IRQS(x) \ BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ BI(x,c) BI(x,d) BI(x,e) BI(x,f) /* * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: * (these are usually mapped to vectors 0x30-0x3f) */ /* * The IO-APIC gives us many more interrupt sources. Most of these * are unused but an SMP system is supposed to have enough memory ... * sometimes (mostly wrt. hw bugs) we get corrupted vectors all * across the spectrum, so we really want to be prepared to get all * of these. Plus, more powerful systems might have more than 64 * IO-APIC registers. * * (these are usually mapped into the 0x30-0xff vector range) */ BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) #undef BUILD_16_IRQS #undef BI #define IRQ(x,y) \ IRQ##x##y##_interrupt #define IRQLIST_16(x) \ IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) /* for the irq vectors */ static void (*interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { IRQLIST_16(0x2), IRQLIST_16(0x3), IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) }; #undef IRQ #undef IRQLIST_16 /* * This is the 'legacy' 8259A Programmable Interrupt Controller, * present in the majority of PC/AT boxes. * plus some generic x86 specific things if generic specifics makes * any sense at all. * this file should become arch/i386/kernel/irq.c when the old irq.c * moves to arch independent land */ static int i8259A_auto_eoi; DEFINE_SPINLOCK(i8259A_lock); static void mask_and_ack_8259A(unsigned int); static struct irq_chip i8259A_chip = { .name = "XT-PIC", .mask = disable_8259A_irq, .disable = disable_8259A_irq, .unmask = enable_8259A_irq, .mask_ack = mask_and_ack_8259A, }; /* * 8259A PIC functions to handle ISA devices: */ /* * This contains the irq mask for both 8259A irq controllers, */ static unsigned int cached_irq_mask = 0xffff; #define __byte(x,y) (((unsigned char *)&(y))[x]) #define cached_21 (__byte(0,cached_irq_mask)) #define cached_A1 (__byte(1,cached_irq_mask)) /* * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) * boards the timer interrupt is not really connected to any IO-APIC pin, * it's fed to the master 8259A's IR0 line only. * * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. * this 'mixed mode' IRQ handling costs nothing because it's only used * at IRQ setup time. */ unsigned long io_apic_irqs; void disable_8259A_irq(unsigned int irq) { unsigned int mask = 1 << irq; unsigned long flags; spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask |= mask; if (irq & 8) outb(cached_A1,0xA1); else outb(cached_21,0x21); spin_unlock_irqrestore(&i8259A_lock, flags); } void enable_8259A_irq(unsigned int irq) { unsigned int mask = ~(1 << irq); unsigned long flags; spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask &= mask; if (irq & 8) outb(cached_A1,0xA1); else outb(cached_21,0x21); spin_unlock_irqrestore(&i8259A_lock, flags); } int i8259A_irq_pending(unsigned int irq) { unsigned int mask = 1<<irq; unsigned long flags; int ret; spin_lock_irqsave(&i8259A_lock, flags); if (irq < 8) ret = inb(0x20) & mask; else ret = inb(0xA0) & (mask >> 8); spin_unlock_irqrestore(&i8259A_lock, flags); return ret; } void make_8259A_irq(unsigned int irq) { disable_irq_nosync(irq); io_apic_irqs &= ~(1<<irq); set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, "XT"); enable_irq(irq); } /* * This function assumes to be called rarely. Switching between * 8259A registers is slow. * This has to be protected by the irq controller spinlock * before being called. */ static inline int i8259A_irq_real(unsigned int irq) { int value; int irqmask = 1<<irq; if (irq < 8) { outb(0x0B,0x20); /* ISR register */ value = inb(0x20) & irqmask; outb(0x0A,0x20); /* back to the IRR register */ return value; } outb(0x0B,0xA0); /* ISR register */ value = inb(0xA0) & (irqmask >> 8); outb(0x0A,0xA0); /* back to the IRR register */ return value; } /* * Careful! The 8259A is a fragile beast, it pretty * much _has_ to be done exactly like this (mask it * first, _then_ send the EOI, and the order of EOI * to the two 8259s is important! */ static void mask_and_ack_8259A(unsigned int irq) { unsigned int irqmask = 1 << irq; unsigned long flags; spin_lock_irqsave(&i8259A_lock, flags); /* * Lightweight spurious IRQ detection. We do not want * to overdo spurious IRQ handling - it's usually a sign * of hardware problems, so we only do the checks we can * do without slowing down good hardware unnecessarily. * * Note that IRQ7 and IRQ15 (the two spurious IRQs * usually resulting from the 8259A-1|2 PICs) occur * even if the IRQ is masked in the 8259A. Thus we * can check spurious 8259A IRQs without doing the * quite slow i8259A_irq_real() call for every IRQ. * This does not cover 100% of spurious interrupts, * but should be enough to warn the user that there * is something bad going on ... */ if (cached_irq_mask & irqmask) goto spurious_8259A_irq; cached_irq_mask |= irqmask; handle_real_irq: if (irq & 8) { inb(0xA1); /* DUMMY - (do we need this?) */ outb(cached_A1,0xA1); outb(0x60+(irq&7),0xA0);/* 'Specific EOI' to slave */ outb(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ } else { inb(0x21); /* DUMMY - (do we need this?) */ outb(cached_21,0x21); outb(0x60+irq,0x20); /* 'Specific EOI' to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; spurious_8259A_irq: /* * this is the slow path - should happen rarely. */ if (i8259A_irq_real(irq)) /* * oops, the IRQ _is_ in service according to the * 8259A - not spurious, go handle it. */ goto handle_real_irq; { static int spurious_irq_mask; /* * At this point we can be sure the IRQ is spurious, * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); /* * Theoretically we do not have to handle this IRQ, * but in Linux this does not cause problems and is * simpler for us. */ goto handle_real_irq; } } void init_8259A(int auto_eoi) { unsigned long flags; i8259A_auto_eoi = auto_eoi; spin_lock_irqsave(&i8259A_lock, flags); outb(0xff, 0x21); /* mask all of 8259A-1 */ outb(0xff, 0xA1); /* mask all of 8259A-2 */ /* * outb_p - this has to work on a wide range of PC hardware. */ outb_p(0x11, 0x20); /* ICW1: select 8259A-1 init */ outb_p(IRQ0_VECTOR, 0x21); /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ outb_p(0x04, 0x21); /* 8259A-1 (the master) has a slave on IR2 */ if (auto_eoi) outb_p(0x03, 0x21); /* master does Auto EOI */ else outb_p(0x01, 0x21); /* master expects normal EOI */ outb_p(0x11, 0xA0); /* ICW1: select 8259A-2 init */ outb_p(IRQ8_VECTOR, 0xA1); /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ outb_p(0x02, 0xA1); /* 8259A-2 is a slave on master's IR2 */ outb_p(0x01, 0xA1); /* (slave's support for AEOI in flat mode is to be investigated) */ if (auto_eoi) /* * in AEOI mode we just have to mask the interrupt * when acking. */ i8259A_chip.mask_ack = disable_8259A_irq; else i8259A_chip.mask_ack = mask_and_ack_8259A; udelay(100); /* wait for 8259A to initialize */ outb(cached_21, 0x21); /* restore master IRQ mask */ outb(cached_A1, 0xA1); /* restore slave IRQ mask */ spin_unlock_irqrestore(&i8259A_lock, flags); } static char irq_trigger[2]; /** * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ */ static void restore_ELCR(char *trigger) { outb(trigger[0], 0x4d0); outb(trigger[1], 0x4d1); } static void save_ELCR(char *trigger) { /* IRQ 0,1,2,8,13 are marked as reserved */ trigger[0] = inb(0x4d0) & 0xF8; trigger[1] = inb(0x4d1) & 0xDE; } static int i8259A_resume(struct sys_device *dev) { init_8259A(i8259A_auto_eoi); restore_ELCR(irq_trigger); return 0; } static int i8259A_suspend(struct sys_device *dev, pm_message_t state) { save_ELCR(irq_trigger); return 0; } static int i8259A_shutdown(struct sys_device *dev) { /* Put the i8259A into a quiescent state that * the kernel initialization code can get it * out of. */ outb(0xff, 0x21); /* mask all of 8259A-1 */ outb(0xff, 0xA1); /* mask all of 8259A-1 */ return 0; } static struct sysdev_class i8259_sysdev_class = { set_kset_name("i8259"), .suspend = i8259A_suspend, .resume = i8259A_resume, .shutdown = i8259A_shutdown, }; static struct sys_device device_i8259A = { .id = 0, .cls = &i8259_sysdev_class, }; static int __init i8259A_init_sysfs(void) { int error = sysdev_class_register(&i8259_sysdev_class); if (!error) error = sysdev_register(&device_i8259A); return error; } device_initcall(i8259A_init_sysfs); /* * IRQ2 is cascade interrupt to second interrupt controller */ static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL}; DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [0 ... IRQ0_VECTOR - 1] = -1, [IRQ0_VECTOR] = 0, [IRQ1_VECTOR] = 1, [IRQ2_VECTOR] = 2, [IRQ3_VECTOR] = 3, [IRQ4_VECTOR] = 4, [IRQ5_VECTOR] = 5, [IRQ6_VECTOR] = 6, [IRQ7_VECTOR] = 7, [IRQ8_VECTOR] = 8, [IRQ9_VECTOR] = 9, [IRQ10_VECTOR] = 10, [IRQ11_VECTOR] = 11, [IRQ12_VECTOR] = 12, [IRQ13_VECTOR] = 13, [IRQ14_VECTOR] = 14, [IRQ15_VECTOR] = 15, [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 }; void __init init_ISA_irqs (void) { int i; init_bsp_APIC(); init_8259A(0); for (i = 0; i < NR_IRQS; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = NULL; irq_desc[i].depth = 1; if (i < 16) { /* * 16 old-style INTA-cycle interrupts: */ set_irq_chip_and_handler_name(i, &i8259A_chip, handle_level_irq, "XT"); } else { /* * 'high' PCI IRQs filled in on demand */ irq_desc[i].chip = &no_irq_chip; } } } void apic_timer_interrupt(void); void spurious_interrupt(void); void error_interrupt(void); void reschedule_interrupt(void); void call_function_interrupt(void); void irq_move_cleanup_interrupt(void); void invalidate_interrupt0(void); void invalidate_interrupt1(void); void invalidate_interrupt2(void); void invalidate_interrupt3(void); void invalidate_interrupt4(void); void invalidate_interrupt5(void); void invalidate_interrupt6(void); void invalidate_interrupt7(void); void thermal_interrupt(void); void threshold_interrupt(void); void i8254_timer_resume(void); static void setup_timer_hardware(void) { outb_p(0x34,0x43); /* binary, mode 2, LSB/MSB, ch 0 */ udelay(10); outb_p(LATCH & 0xff , 0x40); /* LSB */ udelay(10); outb(LATCH >> 8 , 0x40); /* MSB */ } static int timer_resume(struct sys_device *dev) { setup_timer_hardware(); return 0; } void i8254_timer_resume(void) { setup_timer_hardware(); } static struct sysdev_class timer_sysclass = { set_kset_name("timer_pit"), .resume = timer_resume, }; static struct sys_device device_timer = { .id = 0, .cls = &timer_sysclass, }; static int __init init_timer_sysfs(void) { int error = sysdev_class_register(&timer_sysclass); if (!error) error = sysdev_register(&device_timer); return error; } device_initcall(init_timer_sysfs); void __init init_IRQ(void) { int i; init_ISA_irqs(); /* * Cover the whole vector space, no vector can escape * us. (some of these will be overridden and become * 'special' SMP interrupts) */ for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { int vector = FIRST_EXTERNAL_VECTOR + i; if (vector != IA32_SYSCALL_VECTOR) set_intr_gate(vector, interrupt[i]); } #ifdef CONFIG_SMP /* * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. */ set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPIs for invalidation */ set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); /* IPI for generic function call */ set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); /* Low priority IPI to cleanup after moving an irq */ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); #endif set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); /* self generated IPI for local APIC timer */ set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); /* * Set the clock to HZ Hz, we already have a valid * vector now: */ setup_timer_hardware(); if (!acpi_ioapic) setup_irq(2, &irq2); }