/* * IDE tuning and bus mastering support for the CS5510/CS5520 * chipsets * * The CS5510/CS5520 are slightly unusual devices. Unlike the * typical IDE controllers they do bus mastering with the drive in * PIO mode and smarter silicon. * * The practical upshot of this is that we must always tune the * drive for the right PIO mode. We must also ignore all the blacklists * and the drive bus mastering DMA information. * * *** This driver is strictly experimental *** * * (c) Copyright Red Hat Inc 2002 * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * For the avoidance of doubt the "preferred form" of this code is one which * is in an open non patent encumbered format. Where cryptographic key signing * forms part of the process of creating an executable the information * including keys needed to generate an equivalently functional executable * are deemed to be part of the source code. * */ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ide.h> #include <linux/dma-mapping.h> #define DRV_NAME "cs5520" struct pio_clocks { int address; int assert; int recovery; }; static struct pio_clocks cs5520_pio_clocks[]={ {3, 6, 11}, {2, 5, 6}, {1, 4, 3}, {1, 3, 2}, {1, 2, 1} }; static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *pdev = to_pci_dev(hwif->dev); int controller = drive->dn > 1 ? 1 : 0; /* 8bit CAT/CRT - 8bit command timing for channel */ pci_write_config_byte(pdev, 0x62 + controller, (cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].assert)); /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */ /* FIXME: should these use address ? */ /* Data read timing */ pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1), (cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].assert)); /* Write command timing */ pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1), (cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].assert)); } static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) { printk(KERN_ERR "cs55x0: bad ide timing.\n"); cs5520_set_pio_mode(drive, 0); } static const struct ide_port_ops cs5520_port_ops = { .set_pio_mode = cs5520_set_pio_mode, .set_dma_mode = cs5520_set_dma_mode, }; static const struct ide_port_info cyrix_chipset __devinitdata = { .name = DRV_NAME, .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } }, .port_ops = &cs5520_port_ops, .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520, .pio_mask = ATA_PIO4, }; /* * The 5510/5520 are a bit weird. They don't quite set up the way * the PCI helper layer expects so we must do much of the set up * work longhand. */ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &cyrix_chipset; struct ide_hw hw[2], *hws[] = { NULL, NULL }; ide_setup_pci_noise(dev, d); /* We must not grab the entire device, it has 'ISA' space in its * BARS too and we will freak out other bits of the kernel */ if (pci_enable_device_io(dev)) { printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); return -ENODEV; } pci_set_master(dev); if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "%s: No suitable DMA available.\n", d->name); return -ENODEV; } /* * Now the chipset is configured we can let the core * do all the device setup for us */ ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); hw[0].irq = 14; return ide_host_add(d, hws, 2, NULL); } static const struct pci_device_id cs5520_pci_tbl[] = { { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 }, { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl); static struct pci_driver cs5520_pci_driver = { .name = "Cyrix_IDE", .id_table = cs5520_pci_tbl, .probe = cs5520_init_one, .suspend = ide_pci_suspend, .resume = ide_pci_resume, }; static int __init cs5520_ide_init(void) { return ide_pci_register_driver(&cs5520_pci_driver); } module_init(cs5520_ide_init); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE"); MODULE_LICENSE("GPL");