/* * Driver for the VoIP USB phones with CM109 chipsets. * * Copyright (C) 2007 - 2008 Alfred E. Heggestad * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation, version 2. */ /* * Tested devices: * - Komunikate KIP1000 * - Genius G-talk * - Allied-Telesis Corega USBPH01 * - ... * * This driver is based on the yealink.c driver * * Thanks to: * - Authors of yealink.c * - Thomas Reitmayr * - Oliver Neukum for good review comments and code * - Shaun Jackman for Genius G-talk keymap * - Dmitry Torokhov for valuable input and review * * Todo: * - Read/write EEPROM */ #include #include #include #include #include #include #include #define CM109_DEBUG 0 #define DRIVER_VERSION "20080805" #define DRIVER_AUTHOR "Alfred E. Heggestad" #define DRIVER_DESC "CM109 phone driver" static char *phone = "kip1000"; module_param(phone, charp, S_IRUSR); MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}"); enum { /* HID Registers */ HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down */ HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0 */ HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1 */ HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL */ HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */ HID_OR1 = 0x01, /* GPO - General Purpose Output */ HID_OR2 = 0x02, /* Set GPIO to input/output mode */ HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL */ /* HID_IR0 */ RECORD_MUTE = 1 << 3, PLAYBACK_MUTE = 1 << 2, VOLUME_DOWN = 1 << 1, VOLUME_UP = 1 << 0, /* HID_OR0 */ /* bits 7-6 0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer and SPDIF 1: HID_OR0-3 are used as generic HID registers 2: Values written to HID_OR0-3 are also mapped to MCU_CTRL, EEPROM_DATA0-1, EEPROM_CTRL (see Note) 3: Reserved */ HID_OR_GPO_BUZ_SPDIF = 0 << 6, HID_OR_GENERIC_HID_REG = 1 << 6, HID_OR_MAP_MCU_EEPROM = 2 << 6, BUZZER_ON = 1 << 5, /* up to 256 normal keys, up to 16 special keys */ KEYMAP_SIZE = 256 + 16, }; /* CM109 protocol packet */ struct cm109_ctl_packet { u8 byte[4]; } __attribute__ ((packed)); enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) }; /* CM109 device structure */ struct cm109_dev { struct input_dev *idev; /* input device */ struct usb_device *udev; /* usb device */ struct usb_interface *intf; /* irq input channel */ struct cm109_ctl_packet *irq_data; dma_addr_t irq_dma; struct urb *urb_irq; /* control output channel */ struct cm109_ctl_packet *ctl_data; dma_addr_t ctl_dma; struct usb_ctrlrequest *ctl_req; dma_addr_t ctl_req_dma; struct urb *urb_ctl; /* * The 3 bitfields below are protected by ctl_submit_lock. * They have to be separate since they are accessed from IRQ * context. */ unsigned irq_urb_pending:1; /* irq_urb is in flight */ unsigned ctl_urb_pending:1; /* ctl_urb is in flight */ unsigned buzzer_pending:1; /* need to issue buzz command */ spinlock_t ctl_submit_lock; unsigned char buzzer_state; /* on/off */ /* flags */ unsigned open:1; unsigned resetting:1; unsigned shutdown:1; /* This mutex protects writes to the above flags */ struct mutex pm_mutex; unsigned short keymap[KEYMAP_SIZE]; char phys[64]; /* physical device path */ int key_code; /* last reported key */ int keybit; /* 0=new scan 1,2,4,8=scan columns */ u8 gpi; /* Cached value of GPI (high nibble) */ }; /****************************************************************************** * CM109 key interface *****************************************************************************/ static unsigned short special_keymap(int code) { if (code > 0xff) { switch (code - 0xff) { case RECORD_MUTE: return KEY_MUTE; case PLAYBACK_MUTE: return KEY_MUTE; case VOLUME_DOWN: return KEY_VOLUMEDOWN; case VOLUME_UP: return KEY_VOLUMEUP; } } return KEY_RESERVED; } /* Map device buttons to internal key events. * * The "up" and "down" keys, are symbolised by arrows on the button. * The "pickup" and "hangup" keys are symbolised by a green and red phone * on the button. Komunikate KIP1000 Keyboard Matrix -> -- 1 -- 2 -- 3 --> GPI pin 4 (0x10) | | | | <- -- 4 -- 5 -- 6 --> GPI pin 5 (0x20) | | | | END - 7 -- 8 -- 9 --> GPI pin 6 (0x40) | | | | OK -- * -- 0 -- # --> GPI pin 7 (0x80) | | | | /|\ /|\ /|\ /|\ | | | | GPO pin: 3 2 1 0 0x8 0x4 0x2 0x1 */ static unsigned short keymap_kip1000(int scancode) { switch (scancode) { /* phone key: */ case 0x82: return KEY_NUMERIC_0; /* 0 */ case 0x14: return KEY_NUMERIC_1; /* 1 */ case 0x12: return KEY_NUMERIC_2; /* 2 */ case 0x11: return KEY_NUMERIC_3; /* 3 */ case 0x24: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x21: return KEY_NUMERIC_6; /* 6 */ case 0x44: return KEY_NUMERIC_7; /* 7 */ case 0x42: return KEY_NUMERIC_8; /* 8 */ case 0x41: return KEY_NUMERIC_9; /* 9 */ case 0x81: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x88: return KEY_ENTER; /* pickup */ case 0x48: return KEY_ESC; /* hangup */ case 0x28: return KEY_LEFT; /* IN */ case 0x18: return KEY_RIGHT; /* OUT */ default: return special_keymap(scancode); } } /* Contributed by Shaun Jackman Genius G-Talk keyboard matrix 0 1 2 3 4: 0 4 8 Talk 5: 1 5 9 End 6: 2 6 # Up 7: 3 7 * Down */ static unsigned short keymap_gtalk(int scancode) { switch (scancode) { case 0x11: return KEY_NUMERIC_0; case 0x21: return KEY_NUMERIC_1; case 0x41: return KEY_NUMERIC_2; case 0x81: return KEY_NUMERIC_3; case 0x12: return KEY_NUMERIC_4; case 0x22: return KEY_NUMERIC_5; case 0x42: return KEY_NUMERIC_6; case 0x82: return KEY_NUMERIC_7; case 0x14: return KEY_NUMERIC_8; case 0x24: return KEY_NUMERIC_9; case 0x44: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* Talk (green handset) */ case 0x28: return KEY_ESC; /* End (red handset) */ case 0x48: return KEY_UP; /* Menu up (rocker switch) */ case 0x88: return KEY_DOWN; /* Menu down (rocker switch) */ default: return special_keymap(scancode); } } /* * Keymap for Allied-Telesis Corega USBPH01 * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html * * Contributed by july@nat.bg */ static unsigned short keymap_usbph01(int scancode) { switch (scancode) { case 0x11: return KEY_NUMERIC_0; /* 0 */ case 0x21: return KEY_NUMERIC_1; /* 1 */ case 0x41: return KEY_NUMERIC_2; /* 2 */ case 0x81: return KEY_NUMERIC_3; /* 3 */ case 0x12: return KEY_NUMERIC_4; /* 4 */ case 0x22: return KEY_NUMERIC_5; /* 5 */ case 0x42: return KEY_NUMERIC_6; /* 6 */ case 0x82: return KEY_NUMERIC_7; /* 7 */ case 0x14: return KEY_NUMERIC_8; /* 8 */ case 0x24: return KEY_NUMERIC_9; /* 9 */ case 0x44: return KEY_NUMERIC_POUND; /* # */ case 0x84: return KEY_NUMERIC_STAR; /* * */ case 0x18: return KEY_ENTER; /* pickup */ case 0x28: return KEY_ESC; /* hangup */ case 0x48: return KEY_LEFT; /* IN */ case 0x88: return KEY_RIGHT; /* OUT */ default: return special_keymap(scancode); } } static unsigned short (*keymap)(int) = keymap_kip1000; /* * Completes a request by converting the data into events for the * input subsystem. */ static void report_key(struct cm109_dev *dev, int key) { struct input_dev *idev = dev->idev; if (dev->key_code >= 0) { /* old key up */ input_report_key(idev, dev->key_code, 0); } dev->key_code = key; if (key >= 0) { /* new valid key */ input_report_key(idev, key, 1); } input_sync(idev); } /****************************************************************************** * CM109 usb communication interface *****************************************************************************/ static void cm109_submit_buzz_toggle(struct cm109_dev *dev) { int error; if (dev->buzzer_state) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error); } /* * IRQ handler */ static void cm109_urb_irq_callback(struct urb *urb) { struct cm109_dev *dev = urb->context; const int status = urb->status; int error; dev_dbg(&urb->dev->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x", dev->irq_data->byte[0], dev->irq_data->byte[1], dev->irq_data->byte[2], dev->irq_data->byte[3], dev->keybit); if (status) { if (status == -ESHUTDOWN) return; err("%s: urb status %d", __func__, status); } /* Special keys */ if (dev->irq_data->byte[HID_IR0] & 0x0f) { const int code = (dev->irq_data->byte[HID_IR0] & 0x0f); report_key(dev, dev->keymap[0xff + code]); } /* Scan key column */ if (dev->keybit == 0xf) { /* Any changes ? */ if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0)) goto out; dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0; dev->keybit = 0x1; } else { report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]); dev->keybit <<= 1; if (dev->keybit > 0x8) dev->keybit = 0xf; } out: spin_lock(&dev->ctl_submit_lock); dev->irq_urb_pending = 0; if (likely(!dev->shutdown)) { if (dev->buzzer_state) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; dev->ctl_data->byte[HID_OR1] = dev->keybit; dev->ctl_data->byte[HID_OR2] = dev->keybit; dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC); if (error) err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error); } spin_unlock(&dev->ctl_submit_lock); } static void cm109_urb_ctl_callback(struct urb *urb) { struct cm109_dev *dev = urb->context; const int status = urb->status; int error; dev_dbg(&urb->dev->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]", dev->ctl_data->byte[0], dev->ctl_data->byte[1], dev->ctl_data->byte[2], dev->ctl_data->byte[3]); if (status) err("%s: urb status %d", __func__, status); spin_lock(&dev->ctl_submit_lock); dev->ctl_urb_pending = 0; if (likely(!dev->shutdown)) { if (dev->buzzer_pending) { dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); } else if (likely(!dev->irq_urb_pending)) { /* ask for key data */ dev->irq_urb_pending = 1; error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC); if (error) err("%s: usb_submit_urb (urb_irq) failed %d", __func__, error); } } spin_unlock(&dev->ctl_submit_lock); } static void cm109_toggle_buzzer_async(struct cm109_dev *dev) { unsigned long flags; spin_lock_irqsave(&dev->ctl_submit_lock, flags); if (dev->ctl_urb_pending) { /* URB completion will resubmit */ dev->buzzer_pending = 1; } else { dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); } spin_unlock_irqrestore(&dev->ctl_submit_lock, flags); } static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) { int error; if (on) dev->ctl_data->byte[HID_OR0] |= BUZZER_ON; else dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON; error = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), dev->ctl_req->bRequest, dev->ctl_req->bRequestType, le16_to_cpu(dev->ctl_req->wValue), le16_to_cpu(dev->ctl_req->wIndex), dev->ctl_data, USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); if (error && error != EINTR) err("%s: usb_control_msg() failed %d", __func__, error); } static void cm109_stop_traffic(struct cm109_dev *dev) { dev->shutdown = 1; /* * Make sure other CPUs see this */ smp_wmb(); usb_kill_urb(dev->urb_ctl); usb_kill_urb(dev->urb_irq); cm109_toggle_buzzer_sync(dev, 0); dev->shutdown = 0; smp_wmb(); } static void cm109_restore_state(struct cm109_dev *dev) { if (dev->open) { /* * Restore buzzer state. * This will also kick regular URB submission */ cm109_toggle_buzzer_async(dev); } } /****************************************************************************** * input event interface *****************************************************************************/ static int cm109_input_open(struct input_dev *idev) { struct cm109_dev *dev = input_get_drvdata(idev); int error; error = usb_autopm_get_interface(dev->intf); if (error < 0) { err("%s - cannot autoresume, result %d", __func__, error); return error; } mutex_lock(&dev->pm_mutex); dev->buzzer_state = 0; dev->key_code = -1; /* no keys pressed */ dev->keybit = 0xf; /* issue INIT */ dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF; dev->ctl_data->byte[HID_OR1] = dev->keybit; dev->ctl_data->byte[HID_OR2] = dev->keybit; dev->ctl_data->byte[HID_OR3] = 0x00; error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL); if (error) err("%s: usb_submit_urb (urb_ctl) failed %d", __func__, error); else dev->open = 1; mutex_unlock(&dev->pm_mutex); if (error) usb_autopm_put_interface(dev->intf); return error; } static void cm109_input_close(struct input_dev *idev) { struct cm109_dev *dev = input_get_drvdata(idev); mutex_lock(&dev->pm_mutex); /* * Once we are here event delivery is stopped so we * don't need to worry about someone starting buzzer * again */ cm109_stop_traffic(dev); dev->open = 0; mutex_unlock(&dev->pm_mutex); usb_autopm_put_interface(dev->intf); } static int cm109_input_ev(struct input_dev *idev, unsigned int type, unsigned int code, int value) { struct cm109_dev *dev = input_get_drvdata(idev); dev_dbg(&dev->udev->dev, "input_ev: type=%u code=%u value=%d", type, code, value); if (type != EV_SND) return -EINVAL; switch (code) { case SND_TONE: case SND_BELL: dev->buzzer_state = !!value; if (!dev->resetting) cm109_toggle_buzzer_async(dev); return 0; default: return -EINVAL; } } /****************************************************************************** * Linux interface and usb initialisation *****************************************************************************/ struct driver_info { char *name; }; static const struct driver_info info_cm109 = { .name = "CM109 USB driver", }; enum { VENDOR_ID = 0x0d8c, /* C-Media Electronics */ PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */ }; /* table of devices that work with this driver */ static const struct usb_device_id cm109_usb_table[] = { { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = VENDOR_ID, .idProduct = PRODUCT_ID_CM109, .bInterfaceClass = USB_CLASS_HID, .bInterfaceSubClass = 0, .bInterfaceProtocol = 0, .driver_info = (kernel_ulong_t) &info_cm109 }, /* you can add more devices here with product ID 0x0008 - 0x000f */ { } }; static void cm109_usb_cleanup(struct cm109_dev *dev) { if (dev->ctl_req) usb_buffer_free(dev->udev, sizeof(*(dev->ctl_req)), dev->ctl_req, dev->ctl_req_dma); if (dev->ctl_data) usb_buffer_free(dev->udev, USB_PKT_LEN, dev->ctl_data, dev->ctl_dma); if (dev->irq_data) usb_buffer_free(dev->udev, USB_PKT_LEN, dev->irq_data, dev->irq_dma); usb_free_urb(dev->urb_irq); /* parameter validation in core/urb */ usb_free_urb(dev->urb_ctl); /* parameter validation in core/urb */ kfree(dev); } static void cm109_usb_disconnect(struct usb_interface *interface) { struct cm109_dev *dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); input_unregister_device(dev->idev); cm109_usb_cleanup(dev); } static int cm109_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(intf); struct driver_info *nfo = (struct driver_info *)id->driver_info; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; struct cm109_dev *dev; struct input_dev *input_dev = NULL; int ret, pipe, i; int error = -ENOMEM; interface = intf->cur_altsetting; endpoint = &interface->endpoint[0].desc; if (!usb_endpoint_is_int_in(endpoint)) return -ENODEV; dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; spin_lock_init(&dev->ctl_submit_lock); mutex_init(&dev->pm_mutex); dev->udev = udev; dev->intf = intf; dev->idev = input_dev = input_allocate_device(); if (!input_dev) goto err_out; /* allocate usb buffers */ dev->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN, GFP_KERNEL, &dev->irq_dma); if (!dev->irq_data) goto err_out; dev->ctl_data = usb_buffer_alloc(udev, USB_PKT_LEN, GFP_KERNEL, &dev->ctl_dma); if (!dev->ctl_data) goto err_out; dev->ctl_req = usb_buffer_alloc(udev, sizeof(*(dev->ctl_req)), GFP_KERNEL, &dev->ctl_req_dma); if (!dev->ctl_req) goto err_out; /* allocate urb structures */ dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb_irq) goto err_out; dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb_ctl) goto err_out; /* get a handle to the interrupt data pipe */ pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress); ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); if (ret != USB_PKT_LEN) err("invalid payload size %d, expected %d", ret, USB_PKT_LEN); /* initialise irq urb */ usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data, USB_PKT_LEN, cm109_urb_irq_callback, dev, endpoint->bInterval); dev->urb_irq->transfer_dma = dev->irq_dma; dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; dev->urb_irq->dev = udev; /* initialise ctl urb */ dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT; dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION; dev->ctl_req->wValue = cpu_to_le16(0x200); dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber); dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN); usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0), (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN, cm109_urb_ctl_callback, dev); dev->urb_ctl->setup_dma = dev->ctl_req_dma; dev->urb_ctl->transfer_dma = dev->ctl_dma; dev->urb_ctl->transfer_flags |= URB_NO_SETUP_DMA_MAP | URB_NO_TRANSFER_DMA_MAP; dev->urb_ctl->dev = udev; /* find out the physical bus location */ usb_make_path(udev, dev->phys, sizeof(dev->phys)); strlcat(dev->phys, "/input0", sizeof(dev->phys)); /* register settings for the input device */ input_dev->name = nfo->name; input_dev->phys = dev->phys; usb_to_input_id(udev, &input_dev->id); input_dev->dev.parent = &intf->dev; input_set_drvdata(input_dev, dev); input_dev->open = cm109_input_open; input_dev->close = cm109_input_close; input_dev->event = cm109_input_ev; input_dev->keycode = dev->keymap; input_dev->keycodesize = sizeof(unsigned char); input_dev->keycodemax = ARRAY_SIZE(dev->keymap); input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND); input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE); /* register available key events */ for (i = 0; i < KEYMAP_SIZE; i++) { unsigned short k = keymap(i); dev->keymap[i] = k; __set_bit(k, input_dev->keybit); } __clear_bit(KEY_RESERVED, input_dev->keybit); error = input_register_device(dev->idev); if (error) goto err_out; usb_set_intfdata(intf, dev); return 0; err_out: input_free_device(input_dev); cm109_usb_cleanup(dev); return error; } static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message) { struct cm109_dev *dev = usb_get_intfdata(intf); dev_info(&intf->dev, "cm109: usb_suspend (event=%d)", message.event); mutex_lock(&dev->pm_mutex); cm109_stop_traffic(dev); mutex_unlock(&dev->pm_mutex); return 0; } static int cm109_usb_resume(struct usb_interface *intf) { struct cm109_dev *dev = usb_get_intfdata(intf); dev_info(&intf->dev, "cm109: usb_resume"); mutex_lock(&dev->pm_mutex); cm109_restore_state(dev); mutex_unlock(&dev->pm_mutex); return 0; } static int cm109_usb_pre_reset(struct usb_interface *intf) { struct cm109_dev *dev = usb_get_intfdata(intf); mutex_lock(&dev->pm_mutex); /* * Make sure input events don't try to toggle buzzer * while we are resetting */ dev->resetting = 1; smp_wmb(); cm109_stop_traffic(dev); return 0; } static int cm109_usb_post_reset(struct usb_interface *intf) { struct cm109_dev *dev = usb_get_intfdata(intf); dev->resetting = 0; smp_wmb(); cm109_restore_state(dev); mutex_unlock(&dev->pm_mutex); return 0; } static struct usb_driver cm109_driver = { .name = "cm109", .probe = cm109_usb_probe, .disconnect = cm109_usb_disconnect, .suspend = cm109_usb_suspend, .resume = cm109_usb_resume, .reset_resume = cm109_usb_resume, .pre_reset = cm109_usb_pre_reset, .post_reset = cm109_usb_post_reset, .id_table = cm109_usb_table, .supports_autosuspend = 1, }; static int __init cm109_select_keymap(void) { /* Load the phone keymap */ if (!strcasecmp(phone, "kip1000")) { keymap = keymap_kip1000; printk(KERN_INFO KBUILD_MODNAME ": " "Keymap for Komunikate KIP1000 phone loaded"); } else if (!strcasecmp(phone, "gtalk")) { keymap = keymap_gtalk; printk(KERN_INFO KBUILD_MODNAME ": " "Keymap for Genius G-talk phone loaded"); } else if (!strcasecmp(phone, "usbph01")) { keymap = keymap_usbph01; printk(KERN_INFO KBUILD_MODNAME ": " "Keymap for Allied-Telesis Corega USBPH01 phone loaded"); } else { printk(KERN_ERR KBUILD_MODNAME ": " "Unsupported phone: %s", phone); return -EINVAL; } return 0; } static int __init cm109_init(void) { int err; err = cm109_select_keymap(); if (err) return err; err = usb_register(&cm109_driver); if (err) return err; printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR); return 0; } static void __exit cm109_exit(void) { usb_deregister(&cm109_driver); } module_init(cm109_init); module_exit(cm109_exit); MODULE_DEVICE_TABLE(usb, cm109_usb_table); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL");