menuconfig MACINTOSH_DRIVERS bool "Macintosh device drivers" depends on PPC || MAC || X86 default y if (PPC_PMAC || MAC) ---help--- Say Y here to get to see options for devices used with Macintosh computers. This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. if MACINTOSH_DRIVERS config ADB bool "Apple Desktop Bus (ADB) support" depends on MAC || (PPC_PMAC && PPC32) help Apple Desktop Bus (ADB) support is for support of devices which are connected to an ADB port. ADB devices tend to have 4 pins. If you have an Apple Macintosh prior to the iMac, an iBook or PowerBook, or a "Blue and White G3", you probably want to say Y here. Otherwise say N. config ADB_MACII bool "Include Mac II ADB driver" depends on ADB && MAC help Say Y here if want your kernel to support Macintosh systems that use the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and Centris 650. config ADB_MACIISI bool "Include Mac IIsi ADB driver" depends on ADB && MAC help Say Y here if want your kernel to support Macintosh systems that use the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic II, LC, LC II, LC III, Performa 460, and the Performa 600. config ADB_IOP bool "Include IOP (IIfx/Quadra 9x0) ADB driver" depends on ADB && MAC help The I/O Processor (IOP) is an Apple custom IC designed to provide intelligent support for I/O controllers. It is described at <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct support for it, say 'Y' here. config ADB_PMU68K bool "Include PMU (Powerbook) ADB driver" depends on ADB && MAC help Say Y here if want your kernel to support the m68k based Powerbooks. This includes the PowerBook 140, PowerBook 145, PowerBook 150, PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU config ADB_CUDA bool "Support for CUDA based Macs and PowerMacs" depends on (ADB || PPC_PMAC) && !PPC_PMAC64 help This provides support for CUDA based Macintosh and Power Macintosh systems. This includes many m68k based Macs (Color Classic, Mac TV, Performa 475, Performa 520, Performa 550, Performa 575, Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later models should use CONFIG_ADB_PMU instead. It is safe to say Y here even if your machine doesn't have a CUDA. If unsure say Y. config ADB_PMU bool "Support for PMU based PowerMacs" depends on PPC_PMAC help On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the PMU is an embedded microprocessor whose primary function is to control system power, and battery charging on the portable models. The PMU also controls the ADB (Apple Desktop Bus) which connects to the keyboard and mouse on some machines, as well as the non-volatile RAM and the RTC (real time clock) chip. Say Y to enable support for this device; you should do so if your machine is one of those mentioned above. config ADB_PMU_LED bool "Support for the Power/iBook front LED" depends on ADB_PMU select NEW_LEDS select LEDS_CLASS help Support the front LED on Power/iBooks as a generic LED that can be triggered by any of the supported triggers. To get the behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this and the ide-disk LED trigger and configure appropriately through sysfs. config ADB_PMU_LED_IDE bool "Use front LED as IDE LED by default" depends on ADB_PMU_LED select LEDS_TRIGGERS select LEDS_TRIGGER_IDE_DISK help This option makes the front LED default to the IDE trigger so that it blinks on IDE activity. config PMAC_SMU bool "Support for SMU based PowerMacs" depends on PPC_PMAC64 help This option adds support for the newer G5 iMacs and PowerMacs based on the "SMU" system control chip which replaces the old PMU. If you don't know, say Y. config PMAC_APM_EMU tristate "APM emulation" select APM_EMULATION depends on ADB_PMU && PM && PPC32 config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" depends on PPC_PMAC && PPC32 && BLOCK help This option adds support for older PowerBook's hotswap media bay that can contains batteries, floppy drives, or IDE devices. PCI devices are not fully supported in the bay as I never had one to try with config PMAC_BACKLIGHT bool "Backlight control for LCD screens" depends on ADB_PMU && FB = y && (BROKEN || !PPC64) select FB_BACKLIGHT help Say Y here to enable Macintosh specific extensions of the generic backlight code. With this enabled, the brightness keys on older PowerBooks will be enabled so you can change the screen brightness. Newer models should use a userspace daemon like pbbuttonsd. config PMAC_BACKLIGHT_LEGACY bool "Provide legacy ioctl's on /dev/pmu for the backlight" depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) help Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for programs which use this old interface. New and updated programs should use the backlight classes in sysfs. config ADB_MACIO bool "Include MacIO (CHRP) ADB driver" depends on ADB && PPC_CHRP && !PPC_PMAC64 help Say Y here to include direct support for the ADB controller in the Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra also includes a MESH II SCSI controller, DBDMA controller, VIA chip, OpenPIC controller and two RS422/Geoports.) config INPUT_ADBHID bool "Support for ADB input devices (keyboard, mice, ...)" depends on ADB && INPUT=y help Say Y here if you want to have ADB (Apple Desktop Bus) HID devices such as keyboards, mice, joysticks, trackpads or graphic tablets handled by the input layer. If you say Y here, make sure to say Y to the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface support" (CONFIG_INPUT_EVDEV) as well. If unsure, say Y. config MAC_EMUMOUSEBTN bool "Support for mouse button 2+3 emulation" select INPUT help This provides generic support for emulating the 2nd and 3rd mouse button with keypresses. If you say Y here, the emulation is still disabled by default. The emulation is controlled by these sysctl entries: /proc/sys/dev/mac_hid/mouse_button_emulation /proc/sys/dev/mac_hid/mouse_button2_keycode /proc/sys/dev/mac_hid/mouse_button3_keycode If you have an Apple machine with a 1-button mouse, say Y here. config THERM_WINDTUNNEL tristate "Support for thermal management on Windtunnel G4s" depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the desktop G4 "Windtunnel" config THERM_ADT746X tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 help This driver provides some thermostat and fan control for the iBook G4, and the ATI based aluminium PowerBooks, allowing slightly better fan behaviour by default, and some manual control. config THERM_PM72 tristate "Support for thermal management on PowerMac G5" depends on I2C && I2C_POWERMAC && PPC_PMAC64 help This driver provides thermostat and fan control for the desktop G5 machines. config WINDFARM tristate "New PowerMac thermal control infrastructure" depends on PPC config WINDFARM_PM81 tristate "Support for thermal management on iMac G5" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the iMacG5 config WINDFARM_PM91 tristate "Support for thermal management on PowerMac9,1" depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the PowerMac9,1 which is the recent (SMU based) single CPU desktop G5 config WINDFARM_PM112 tristate "Support for thermal management on PowerMac11,2" depends on WINDFARM && I2C && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the PowerMac11,2 which are the recent dual and quad G5 machines using the 970MP dual-core processor. config WINDFARM_PM121 tristate "Support for thermal management on PowerMac12,1" depends on WINDFARM && I2C && PMAC_SMU select I2C_POWERMAC help This driver provides thermal control for the PowerMac12,1 which is the iMac G5 (iSight). config ANSLCD tristate "Support for ANS LCD display" depends on ADB_CUDA && PPC_PMAC config PMAC_RACKMETER tristate "Support for Apple XServe front panel LEDs" depends on PPC_PMAC help This driver provides some support to control the front panel blue LEDs "vu-meter" of the XServer macs. endif # MACINTOSH_DRIVERS